1 /*- 2 * Copyright (c) 2011-2014 LSI Corp. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * LSI MPT-Fusion Host Adapter FreeBSD 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 /* Communications core for LSI MPT2 */ 33 34 /* TODO Move headers to mprvar */ 35 #include <sys/types.h> 36 #include <sys/param.h> 37 #include <sys/systm.h> 38 #include <sys/kernel.h> 39 #include <sys/selinfo.h> 40 #include <sys/module.h> 41 #include <sys/bus.h> 42 #include <sys/conf.h> 43 #include <sys/bio.h> 44 #include <sys/malloc.h> 45 #include <sys/uio.h> 46 #include <sys/sysctl.h> 47 #include <sys/endian.h> 48 #include <sys/queue.h> 49 #include <sys/kthread.h> 50 #include <sys/taskqueue.h> 51 #include <sys/sbuf.h> 52 53 #include <machine/bus.h> 54 #include <machine/resource.h> 55 #include <sys/rman.h> 56 57 #include <machine/stdarg.h> 58 59 #include <cam/cam.h> 60 #include <cam/cam_ccb.h> 61 #include <cam/cam_debug.h> 62 #include <cam/cam_sim.h> 63 #include <cam/cam_xpt_sim.h> 64 #include <cam/cam_xpt_periph.h> 65 #include <cam/cam_periph.h> 66 #include <cam/scsi/scsi_all.h> 67 #include <cam/scsi/scsi_message.h> 68 69 #include <dev/mpr/mpi/mpi2_type.h> 70 #include <dev/mpr/mpi/mpi2.h> 71 #include <dev/mpr/mpi/mpi2_ioc.h> 72 #include <dev/mpr/mpi/mpi2_sas.h> 73 #include <dev/mpr/mpi/mpi2_cnfg.h> 74 #include <dev/mpr/mpi/mpi2_init.h> 75 #include <dev/mpr/mpi/mpi2_raid.h> 76 #include <dev/mpr/mpi/mpi2_tool.h> 77 #include <dev/mpr/mpr_ioctl.h> 78 #include <dev/mpr/mprvar.h> 79 #include <dev/mpr/mpr_table.h> 80 #include <dev/mpr/mpr_sas.h> 81 82 /* For Hashed SAS Address creation for SATA Drives */ 83 #define MPT2SAS_SN_LEN 20 84 #define MPT2SAS_MN_LEN 40 85 86 struct mpr_fw_event_work { 87 u16 event; 88 void *event_data; 89 TAILQ_ENTRY(mpr_fw_event_work) ev_link; 90 }; 91 92 union _sata_sas_address { 93 u8 wwid[8]; 94 struct { 95 u32 high; 96 u32 low; 97 } word; 98 }; 99 100 /* 101 * define the IDENTIFY DEVICE structure 102 */ 103 struct _ata_identify_device_data { 104 u16 reserved1[10]; /* 0-9 */ 105 u16 serial_number[10]; /* 10-19 */ 106 u16 reserved2[7]; /* 20-26 */ 107 u16 model_number[20]; /* 27-46*/ 108 u16 reserved3[209]; /* 47-255*/ 109 }; 110 static u32 event_count; 111 static void mprsas_fw_work(struct mpr_softc *sc, 112 struct mpr_fw_event_work *fw_event); 113 static void mprsas_fw_event_free(struct mpr_softc *, 114 struct mpr_fw_event_work *); 115 static int mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate); 116 static int mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle, 117 Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz, 118 u32 devinfo); 119 int mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc, 120 u64 *sas_address, u16 handle, u32 device_info); 121 static int mprsas_volume_add(struct mpr_softc *sc, 122 u16 handle); 123 static void mprsas_SSU_to_SATA_devices(struct mpr_softc *sc); 124 static void mprsas_stop_unit_done(struct cam_periph *periph, 125 union ccb *done_ccb); 126 127 void 128 mprsas_evt_handler(struct mpr_softc *sc, uintptr_t data, 129 MPI2_EVENT_NOTIFICATION_REPLY *event) 130 { 131 struct mpr_fw_event_work *fw_event; 132 u16 sz; 133 134 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 135 mpr_print_evt_sas(sc, event); 136 mprsas_record_event(sc, event); 137 138 fw_event = malloc(sizeof(struct mpr_fw_event_work), M_MPR, 139 M_ZERO|M_NOWAIT); 140 if (!fw_event) { 141 printf("%s: allocate failed for fw_event\n", __func__); 142 return; 143 } 144 sz = le16toh(event->EventDataLength) * 4; 145 fw_event->event_data = malloc(sz, M_MPR, M_ZERO|M_NOWAIT); 146 if (!fw_event->event_data) { 147 printf("%s: allocate failed for event_data\n", __func__); 148 free(fw_event, M_MPR); 149 return; 150 } 151 152 bcopy(event->EventData, fw_event->event_data, sz); 153 fw_event->event = event->Event; 154 if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || 155 event->Event == MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE || 156 event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) && 157 sc->track_mapping_events) 158 sc->pending_map_events++; 159 160 /* 161 * When wait_for_port_enable flag is set, make sure that all the events 162 * are processed. Increment the startup_refcount and decrement it after 163 * events are processed. 164 */ 165 if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || 166 event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) && 167 sc->wait_for_port_enable) 168 mprsas_startup_increment(sc->sassc); 169 170 TAILQ_INSERT_TAIL(&sc->sassc->ev_queue, fw_event, ev_link); 171 taskqueue_enqueue(sc->sassc->ev_tq, &sc->sassc->ev_task); 172 173 } 174 175 static void 176 mprsas_fw_event_free(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event) 177 { 178 179 free(fw_event->event_data, M_MPR); 180 free(fw_event, M_MPR); 181 } 182 183 /** 184 * _mpr_fw_work - delayed task for processing firmware events 185 * @sc: per adapter object 186 * @fw_event: The fw_event_work object 187 * Context: user. 188 * 189 * Return nothing. 190 */ 191 static void 192 mprsas_fw_work(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event) 193 { 194 struct mprsas_softc *sassc; 195 sassc = sc->sassc; 196 197 mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Working on Event: [%x]\n", 198 event_count++, __func__, fw_event->event); 199 switch (fw_event->event) { 200 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: 201 { 202 MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *data; 203 MPI2_EVENT_SAS_TOPO_PHY_ENTRY *phy; 204 int i; 205 206 data = (MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *) 207 fw_event->event_data; 208 209 mpr_mapping_topology_change_event(sc, fw_event->event_data); 210 211 for (i = 0; i < data->NumEntries; i++) { 212 phy = &data->PHY[i]; 213 switch (phy->PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK) { 214 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: 215 if (mprsas_add_device(sc, 216 le16toh(phy->AttachedDevHandle), 217 phy->LinkRate)) { 218 printf("%s: failed to add device with " 219 "handle 0x%x\n", __func__, 220 le16toh(phy->AttachedDevHandle)); 221 mprsas_prepare_remove(sassc, le16toh( 222 phy->AttachedDevHandle)); 223 } 224 break; 225 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: 226 mprsas_prepare_remove(sassc, le16toh( 227 phy->AttachedDevHandle)); 228 break; 229 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: 230 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: 231 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: 232 default: 233 break; 234 } 235 } 236 /* 237 * refcount was incremented for this event in 238 * mprsas_evt_handler. Decrement it here because the event has 239 * been processed. 240 */ 241 mprsas_startup_decrement(sassc); 242 break; 243 } 244 case MPI2_EVENT_SAS_DISCOVERY: 245 { 246 MPI2_EVENT_DATA_SAS_DISCOVERY *data; 247 248 data = (MPI2_EVENT_DATA_SAS_DISCOVERY *)fw_event->event_data; 249 250 if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_STARTED) 251 mpr_dprint(sc, MPR_TRACE,"SAS discovery start " 252 "event\n"); 253 if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_COMPLETED) { 254 mpr_dprint(sc, MPR_TRACE,"SAS discovery stop event\n"); 255 sassc->flags &= ~MPRSAS_IN_DISCOVERY; 256 mprsas_discovery_end(sassc); 257 } 258 break; 259 } 260 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: 261 { 262 Mpi2EventDataSasEnclDevStatusChange_t *data; 263 data = (Mpi2EventDataSasEnclDevStatusChange_t *) 264 fw_event->event_data; 265 mpr_mapping_enclosure_dev_status_change_event(sc, 266 fw_event->event_data); 267 break; 268 } 269 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: 270 { 271 Mpi2EventIrConfigElement_t *element; 272 int i; 273 u8 foreign_config, reason; 274 u16 elementType; 275 Mpi2EventDataIrConfigChangeList_t *event_data; 276 struct mprsas_target *targ; 277 unsigned int id; 278 279 event_data = fw_event->event_data; 280 foreign_config = (le32toh(event_data->Flags) & 281 MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; 282 283 element = 284 (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; 285 id = mpr_mapping_get_raid_id_from_handle(sc, 286 element->VolDevHandle); 287 288 mpr_mapping_ir_config_change_event(sc, event_data); 289 for (i = 0; i < event_data->NumElements; i++, element++) { 290 reason = element->ReasonCode; 291 elementType = le16toh(element->ElementFlags) & 292 MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; 293 /* 294 * check for element type of Phys Disk or Hot Spare 295 */ 296 if ((elementType != 297 MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT) 298 && (elementType != 299 MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT)) 300 // do next element 301 goto skip_fp_send; 302 303 /* 304 * check for reason of Hide, Unhide, PD Created, or PD 305 * Deleted 306 */ 307 if ((reason != MPI2_EVENT_IR_CHANGE_RC_HIDE) && 308 (reason != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) && 309 (reason != MPI2_EVENT_IR_CHANGE_RC_PD_CREATED) && 310 (reason != MPI2_EVENT_IR_CHANGE_RC_PD_DELETED)) 311 goto skip_fp_send; 312 313 // check for a reason of Hide or PD Created 314 if ((reason == MPI2_EVENT_IR_CHANGE_RC_HIDE) || 315 (reason == MPI2_EVENT_IR_CHANGE_RC_PD_CREATED)) 316 { 317 // build RAID Action message 318 Mpi2RaidActionRequest_t *action; 319 Mpi2RaidActionReply_t *reply; 320 struct mpr_command *cm; 321 int error = 0; 322 if ((cm = mpr_alloc_command(sc)) == NULL) { 323 printf("%s: command alloc failed\n", 324 __func__); 325 return; 326 } 327 328 mpr_dprint(sc, MPR_INFO, "Sending FP action " 329 "from " 330 "MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST " 331 ":\n"); 332 action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req; 333 action->Function = MPI2_FUNCTION_RAID_ACTION; 334 action->Action = 335 MPI2_RAID_ACTION_PHYSDISK_HIDDEN; 336 action->PhysDiskNum = element->PhysDiskNum; 337 cm->cm_desc.Default.RequestFlags = 338 MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 339 error = mpr_request_polled(sc, cm); 340 reply = (Mpi2RaidActionReply_t *)cm->cm_reply; 341 if (error || (reply == NULL)) { 342 /* FIXME */ 343 /* 344 * If the poll returns error then we 345 * need to do diag reset 346 */ 347 printf("%s: poll for page completed " 348 "with error %d", __func__, error); 349 } 350 if (reply && (le16toh(reply->IOCStatus) & 351 MPI2_IOCSTATUS_MASK) != 352 MPI2_IOCSTATUS_SUCCESS) { 353 mpr_dprint(sc, MPR_INFO, "%s: error " 354 "sending RaidActionPage; iocstatus " 355 "= 0x%x\n", __func__, 356 le16toh(reply->IOCStatus)); 357 } 358 359 if (cm) 360 mpr_free_command(sc, cm); 361 } 362 skip_fp_send: 363 mpr_dprint(sc, MPR_INFO, "Received " 364 "MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST Reason " 365 "code %x:\n", element->ReasonCode); 366 switch (element->ReasonCode) { 367 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: 368 case MPI2_EVENT_IR_CHANGE_RC_ADDED: 369 if (!foreign_config) { 370 if (mprsas_volume_add(sc, 371 le16toh(element->VolDevHandle))) { 372 printf("%s: failed to add RAID " 373 "volume with handle 0x%x\n", 374 __func__, le16toh(element-> 375 VolDevHandle)); 376 } 377 } 378 break; 379 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: 380 case MPI2_EVENT_IR_CHANGE_RC_REMOVED: 381 /* 382 * Rescan after volume is deleted or removed. 383 */ 384 if (!foreign_config) { 385 if (id == MPR_MAP_BAD_ID) { 386 printf("%s: could not get ID " 387 "for volume with handle " 388 "0x%04x\n", __func__, 389 le16toh(element-> 390 VolDevHandle)); 391 break; 392 } 393 394 targ = &sassc->targets[id]; 395 targ->handle = 0x0; 396 targ->encl_slot = 0x0; 397 targ->encl_handle = 0x0; 398 targ->encl_level_valid = 0x0; 399 targ->encl_level = 0x0; 400 targ->connector_name[0] = ' '; 401 targ->connector_name[1] = ' '; 402 targ->connector_name[2] = ' '; 403 targ->connector_name[3] = ' '; 404 targ->exp_dev_handle = 0x0; 405 targ->phy_num = 0x0; 406 targ->linkrate = 0x0; 407 mprsas_rescan_target(sc, targ); 408 printf("RAID target id 0x%x removed\n", 409 targ->tid); 410 } 411 break; 412 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: 413 case MPI2_EVENT_IR_CHANGE_RC_HIDE: 414 /* 415 * Phys Disk of a volume has been created. Hide 416 * it from the OS. 417 */ 418 targ = mprsas_find_target_by_handle(sassc, 0, 419 element->PhysDiskDevHandle); 420 if (targ == NULL) 421 break; 422 targ->flags |= MPR_TARGET_FLAGS_RAID_COMPONENT; 423 mprsas_rescan_target(sc, targ); 424 425 break; 426 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: 427 /* 428 * Phys Disk of a volume has been deleted. 429 * Expose it to the OS. 430 */ 431 if (mprsas_add_device(sc, 432 le16toh(element->PhysDiskDevHandle), 0)) { 433 printf("%s: failed to add device with " 434 "handle 0x%x\n", __func__, 435 le16toh(element-> 436 PhysDiskDevHandle)); 437 mprsas_prepare_remove(sassc, 438 le16toh(element-> 439 PhysDiskDevHandle)); 440 } 441 break; 442 } 443 } 444 /* 445 * refcount was incremented for this event in 446 * mprsas_evt_handler. Decrement it here because the event has 447 * been processed. 448 */ 449 mprsas_startup_decrement(sassc); 450 break; 451 } 452 case MPI2_EVENT_IR_VOLUME: 453 { 454 Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; 455 456 /* 457 * Informational only. 458 */ 459 mpr_dprint(sc, MPR_EVENT, "Received IR Volume event:\n"); 460 switch (event_data->ReasonCode) { 461 case MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED: 462 mpr_dprint(sc, MPR_EVENT, " Volume Settings " 463 "changed from 0x%x to 0x%x for Volome with " 464 "handle 0x%x", le32toh(event_data->PreviousValue), 465 le32toh(event_data->NewValue), 466 le16toh(event_data->VolDevHandle)); 467 break; 468 case MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED: 469 mpr_dprint(sc, MPR_EVENT, " Volume Status " 470 "changed from 0x%x to 0x%x for Volome with " 471 "handle 0x%x", le32toh(event_data->PreviousValue), 472 le32toh(event_data->NewValue), 473 le16toh(event_data->VolDevHandle)); 474 break; 475 case MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED: 476 mpr_dprint(sc, MPR_EVENT, " Volume State " 477 "changed from 0x%x to 0x%x for Volome with " 478 "handle 0x%x", le32toh(event_data->PreviousValue), 479 le32toh(event_data->NewValue), 480 le16toh(event_data->VolDevHandle)); 481 u32 state; 482 struct mprsas_target *targ; 483 state = le32toh(event_data->NewValue); 484 switch (state) { 485 case MPI2_RAID_VOL_STATE_MISSING: 486 case MPI2_RAID_VOL_STATE_FAILED: 487 mprsas_prepare_volume_remove(sassc, 488 event_data->VolDevHandle); 489 break; 490 491 case MPI2_RAID_VOL_STATE_ONLINE: 492 case MPI2_RAID_VOL_STATE_DEGRADED: 493 case MPI2_RAID_VOL_STATE_OPTIMAL: 494 targ = 495 mprsas_find_target_by_handle(sassc, 496 0, event_data->VolDevHandle); 497 if (targ) { 498 printf("%s %d: Volume handle " 499 "0x%x is already added \n", 500 __func__, __LINE__, 501 event_data->VolDevHandle); 502 break; 503 } 504 if (mprsas_volume_add(sc, 505 le16toh(event_data-> 506 VolDevHandle))) { 507 printf("%s: failed to add RAID " 508 "volume with handle 0x%x\n", 509 __func__, le16toh( 510 event_data->VolDevHandle)); 511 } 512 break; 513 default: 514 break; 515 } 516 break; 517 default: 518 break; 519 } 520 break; 521 } 522 case MPI2_EVENT_IR_PHYSICAL_DISK: 523 { 524 Mpi2EventDataIrPhysicalDisk_t *event_data = 525 fw_event->event_data; 526 struct mprsas_target *targ; 527 528 /* 529 * Informational only. 530 */ 531 mpr_dprint(sc, MPR_EVENT, "Received IR Phys Disk event:\n"); 532 switch (event_data->ReasonCode) { 533 case MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED: 534 mpr_dprint(sc, MPR_EVENT, " Phys Disk Settings " 535 "changed from 0x%x to 0x%x for Phys Disk Number " 536 "%d and handle 0x%x at Enclosure handle 0x%x, Slot " 537 "%d", le32toh(event_data->PreviousValue), 538 le32toh(event_data->NewValue), 539 event_data->PhysDiskNum, 540 le16toh(event_data->PhysDiskDevHandle), 541 le16toh(event_data->EnclosureHandle), 542 le16toh(event_data->Slot)); 543 break; 544 case MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED: 545 mpr_dprint(sc, MPR_EVENT, " Phys Disk Status changed " 546 "from 0x%x to 0x%x for Phys Disk Number %d and " 547 "handle 0x%x at Enclosure handle 0x%x, Slot %d", 548 le32toh(event_data->PreviousValue), 549 le32toh(event_data->NewValue), 550 event_data->PhysDiskNum, 551 le16toh(event_data->PhysDiskDevHandle), 552 le16toh(event_data->EnclosureHandle), 553 le16toh(event_data->Slot)); 554 break; 555 case MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED: 556 mpr_dprint(sc, MPR_EVENT, " Phys Disk State changed " 557 "from 0x%x to 0x%x for Phys Disk Number %d and " 558 "handle 0x%x at Enclosure handle 0x%x, Slot %d", 559 le32toh(event_data->PreviousValue), 560 le32toh(event_data->NewValue), 561 event_data->PhysDiskNum, 562 le16toh(event_data->PhysDiskDevHandle), 563 le16toh(event_data->EnclosureHandle), 564 le16toh(event_data->Slot)); 565 switch (event_data->NewValue) { 566 case MPI2_RAID_PD_STATE_ONLINE: 567 case MPI2_RAID_PD_STATE_DEGRADED: 568 case MPI2_RAID_PD_STATE_REBUILDING: 569 case MPI2_RAID_PD_STATE_OPTIMAL: 570 case MPI2_RAID_PD_STATE_HOT_SPARE: 571 targ = mprsas_find_target_by_handle( 572 sassc, 0, 573 event_data->PhysDiskDevHandle); 574 if (targ) { 575 targ->flags |= 576 MPR_TARGET_FLAGS_RAID_COMPONENT; 577 printf("%s %d: Found Target " 578 "for handle 0x%x.\n", 579 __func__, __LINE__ , 580 event_data-> 581 PhysDiskDevHandle); 582 } 583 break; 584 case MPI2_RAID_PD_STATE_OFFLINE: 585 case MPI2_RAID_PD_STATE_NOT_CONFIGURED: 586 case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: 587 default: 588 targ = mprsas_find_target_by_handle( 589 sassc, 0, 590 event_data->PhysDiskDevHandle); 591 if (targ) { 592 targ->flags |= 593 ~MPR_TARGET_FLAGS_RAID_COMPONENT; 594 printf("%s %d: Found Target " 595 "for handle 0x%x. \n", 596 __func__, __LINE__ , 597 event_data-> 598 PhysDiskDevHandle); 599 } 600 break; 601 } 602 default: 603 break; 604 } 605 break; 606 } 607 case MPI2_EVENT_IR_OPERATION_STATUS: 608 { 609 Mpi2EventDataIrOperationStatus_t *event_data = 610 fw_event->event_data; 611 612 /* 613 * Informational only. 614 */ 615 mpr_dprint(sc, MPR_EVENT, "Received IR Op Status event:\n"); 616 mpr_dprint(sc, MPR_EVENT, " RAID Operation of %d is %d " 617 "percent complete for Volume with handle 0x%x", 618 event_data->RAIDOperation, event_data->PercentComplete, 619 le16toh(event_data->VolDevHandle)); 620 break; 621 } 622 case MPI2_EVENT_TEMP_THRESHOLD: 623 { 624 pMpi2EventDataTemperature_t temp_event; 625 626 temp_event = (pMpi2EventDataTemperature_t)fw_event->event_data; 627 628 /* 629 * The Temp Sensor Count must be greater than the event's Sensor 630 * Num to be valid. If valid, print the temp thresholds that 631 * have been exceeded. 632 */ 633 if (sc->iounit_pg8.NumSensors > temp_event->SensorNum) { 634 mpr_dprint(sc, MPR_FAULT, "Temperature Threshold flags " 635 "%s %s %s %s exceeded for Sensor: %d !!!\n", 636 ((temp_event->Status & 0x01) == 1) ? "0 " : " ", 637 ((temp_event->Status & 0x02) == 2) ? "1 " : " ", 638 ((temp_event->Status & 0x04) == 4) ? "2 " : " ", 639 ((temp_event->Status & 0x08) == 8) ? "3 " : " ", 640 temp_event->SensorNum); 641 mpr_dprint(sc, MPR_FAULT, "Current Temp in Celsius: " 642 "%d\n", temp_event->CurrentTemperature); 643 } 644 break; 645 } 646 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: 647 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: 648 default: 649 mpr_dprint(sc, MPR_TRACE,"Unhandled event 0x%0X\n", 650 fw_event->event); 651 break; 652 653 } 654 mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Event Free: [%x]\n", event_count, 655 __func__, fw_event->event); 656 mprsas_fw_event_free(sc, fw_event); 657 } 658 659 void 660 mprsas_firmware_event_work(void *arg, int pending) 661 { 662 struct mpr_fw_event_work *fw_event; 663 struct mpr_softc *sc; 664 665 sc = (struct mpr_softc *)arg; 666 mpr_lock(sc); 667 while ((fw_event = TAILQ_FIRST(&sc->sassc->ev_queue)) != NULL) { 668 TAILQ_REMOVE(&sc->sassc->ev_queue, fw_event, ev_link); 669 mprsas_fw_work(sc, fw_event); 670 } 671 mpr_unlock(sc); 672 } 673 674 static int 675 mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate){ 676 char devstring[80]; 677 struct mprsas_softc *sassc; 678 struct mprsas_target *targ; 679 Mpi2ConfigReply_t mpi_reply; 680 Mpi2SasDevicePage0_t config_page; 681 uint64_t sas_address, sata_sas_address; 682 uint64_t parent_sas_address = 0; 683 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 684 u32 device_info, parent_devinfo = 0; 685 unsigned int id; 686 int ret; 687 int error = 0; 688 struct mprsas_lun *lun; 689 690 sassc = sc->sassc; 691 mprsas_startup_increment(sassc); 692 if ((mpr_config_get_sas_device_pg0(sc, &mpi_reply, &config_page, 693 MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { 694 printf("%s: error reading SAS device page0\n", __func__); 695 error = ENXIO; 696 goto out; 697 } 698 699 device_info = le32toh(config_page.DeviceInfo); 700 701 if (((device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0) 702 && (le16toh(config_page.ParentDevHandle) != 0)) { 703 Mpi2ConfigReply_t tmp_mpi_reply; 704 Mpi2SasDevicePage0_t parent_config_page; 705 706 if ((mpr_config_get_sas_device_pg0(sc, &tmp_mpi_reply, 707 &parent_config_page, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, 708 le16toh(config_page.ParentDevHandle)))) { 709 printf("%s: error reading SAS device %#x page0\n", 710 __func__, le16toh(config_page.ParentDevHandle)); 711 } else { 712 parent_sas_address = parent_config_page.SASAddress.High; 713 parent_sas_address = (parent_sas_address << 32) | 714 parent_config_page.SASAddress.Low; 715 parent_devinfo = le32toh(parent_config_page.DeviceInfo); 716 } 717 } 718 /* TODO Check proper endianess */ 719 sas_address = config_page.SASAddress.High; 720 sas_address = (sas_address << 32) | 721 config_page.SASAddress.Low; 722 723 if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) 724 == MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) { 725 if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) { 726 ret = mprsas_get_sas_address_for_sata_disk(sc, 727 &sata_sas_address, handle, device_info); 728 if (!ret) 729 id = mpr_mapping_get_sas_id(sc, 730 sata_sas_address, handle); 731 else 732 id = mpr_mapping_get_sas_id(sc, 733 sas_address, handle); 734 } else 735 id = mpr_mapping_get_sas_id(sc, sas_address, 736 handle); 737 } else 738 id = mpr_mapping_get_sas_id(sc, sas_address, handle); 739 740 if (id == MPR_MAP_BAD_ID) { 741 printf("failure at %s:%d/%s()! Could not get ID for device " 742 "with handle 0x%04x\n", __FILE__, __LINE__, __func__, 743 handle); 744 error = ENXIO; 745 goto out; 746 } 747 748 if (mprsas_check_id(sassc, id) != 0) { 749 device_printf(sc->mpr_dev, "Excluding target id %d\n", id); 750 error = ENXIO; 751 goto out; 752 } 753 754 mpr_dprint(sc, MPR_MAPPING, "SAS Address from SAS device page0 = %jx\n", 755 sas_address); 756 targ = &sassc->targets[id]; 757 targ->devinfo = device_info; 758 targ->devname = le32toh(config_page.DeviceName.High); 759 targ->devname = (targ->devname << 32) | 760 le32toh(config_page.DeviceName.Low); 761 targ->encl_handle = le16toh(config_page.EnclosureHandle); 762 targ->encl_slot = le16toh(config_page.Slot); 763 targ->encl_level = config_page.EnclosureLevel; 764 targ->connector_name[0] = config_page.ConnectorName[0]; 765 targ->connector_name[1] = config_page.ConnectorName[1]; 766 targ->connector_name[2] = config_page.ConnectorName[2]; 767 targ->connector_name[3] = config_page.ConnectorName[3]; 768 targ->handle = handle; 769 targ->parent_handle = le16toh(config_page.ParentDevHandle); 770 targ->sasaddr = mpr_to_u64(&config_page.SASAddress); 771 targ->parent_sasaddr = le64toh(parent_sas_address); 772 targ->parent_devinfo = parent_devinfo; 773 targ->tid = id; 774 targ->linkrate = (linkrate>>4); 775 targ->flags = 0; 776 if (le16toh(config_page.Flags) & 777 MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) { 778 targ->scsi_req_desc_type = 779 MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; 780 } 781 if (le16toh(config_page.Flags) & 782 MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) { 783 targ->encl_level_valid = TRUE; 784 } 785 TAILQ_INIT(&targ->commands); 786 TAILQ_INIT(&targ->timedout_commands); 787 while (!SLIST_EMPTY(&targ->luns)) { 788 lun = SLIST_FIRST(&targ->luns); 789 SLIST_REMOVE_HEAD(&targ->luns, lun_link); 790 free(lun, M_MPR); 791 } 792 SLIST_INIT(&targ->luns); 793 794 mpr_describe_devinfo(targ->devinfo, devstring, 80); 795 mpr_dprint(sc, (MPR_XINFO|MPR_MAPPING), "Found device <%s> <%s> " 796 "handle<0x%04x> enclosureHandle<0x%04x> slot %d\n", devstring, 797 mpr_describe_table(mpr_linkrate_names, targ->linkrate), 798 targ->handle, targ->encl_handle, targ->encl_slot); 799 if (targ->encl_level_valid) { 800 mpr_dprint(sc, (MPR_XINFO|MPR_MAPPING), "At enclosure level %d " 801 "and connector name (%4s)\n", targ->encl_level, 802 targ->connector_name); 803 } 804 #if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \ 805 (__FreeBSD_version < 902502) 806 if ((sassc->flags & MPRSAS_IN_STARTUP) == 0) 807 #endif 808 mprsas_rescan_target(sc, targ); 809 mpr_dprint(sc, MPR_MAPPING, "Target id 0x%x added\n", targ->tid); 810 out: 811 mprsas_startup_decrement(sassc); 812 return (error); 813 814 } 815 816 int 817 mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc, 818 u64 *sas_address, u16 handle, u32 device_info) 819 { 820 Mpi2SataPassthroughReply_t mpi_reply; 821 int i, rc, try_count; 822 u32 *bufferptr; 823 union _sata_sas_address hash_address; 824 struct _ata_identify_device_data ata_identify; 825 u8 buffer[MPT2SAS_MN_LEN + MPT2SAS_SN_LEN]; 826 u32 ioc_status; 827 u8 sas_status; 828 829 memset(&ata_identify, 0, sizeof(ata_identify)); 830 try_count = 0; 831 do { 832 rc = mprsas_get_sata_identify(sc, handle, &mpi_reply, 833 (char *)&ata_identify, sizeof(ata_identify), device_info); 834 try_count++; 835 ioc_status = le16toh(mpi_reply.IOCStatus) 836 & MPI2_IOCSTATUS_MASK; 837 sas_status = mpi_reply.SASStatus; 838 } while ((rc == -EAGAIN || ioc_status || sas_status) && 839 (try_count < 5)); 840 841 if (rc == 0 && !ioc_status && !sas_status) { 842 mpr_dprint(sc, MPR_MAPPING, "%s: got SATA identify " 843 "successfully for handle = 0x%x with try_count = %d\n", 844 __func__, handle, try_count); 845 } else { 846 mpr_dprint(sc, MPR_MAPPING, "%s: handle = 0x%x failed\n", 847 __func__, handle); 848 return -1; 849 } 850 /* Copy & byteswap the 40 byte model number to a buffer */ 851 for (i = 0; i < MPT2SAS_MN_LEN; i += 2) { 852 buffer[i] = ((u8 *)ata_identify.model_number)[i + 1]; 853 buffer[i + 1] = ((u8 *)ata_identify.model_number)[i]; 854 } 855 /* Copy & byteswap the 20 byte serial number to a buffer */ 856 for (i = 0; i < MPT2SAS_SN_LEN; i += 2) { 857 buffer[MPT2SAS_MN_LEN + i] = 858 ((u8 *)ata_identify.serial_number)[i + 1]; 859 buffer[MPT2SAS_MN_LEN + i + 1] = 860 ((u8 *)ata_identify.serial_number)[i]; 861 } 862 bufferptr = (u32 *)buffer; 863 /* There are 60 bytes to hash down to 8. 60 isn't divisible by 8, 864 * so loop through the first 56 bytes (7*8), 865 * and then add in the last dword. 866 */ 867 hash_address.word.low = 0; 868 hash_address.word.high = 0; 869 for (i = 0; (i < ((MPT2SAS_MN_LEN+MPT2SAS_SN_LEN)/8)); i++) { 870 hash_address.word.low += *bufferptr; 871 bufferptr++; 872 hash_address.word.high += *bufferptr; 873 bufferptr++; 874 } 875 /* Add the last dword */ 876 hash_address.word.low += *bufferptr; 877 /* Make sure the hash doesn't start with 5, because it could clash 878 * with a SAS address. Change 5 to a D. 879 */ 880 if ((hash_address.word.high & 0x000000F0) == (0x00000050)) 881 hash_address.word.high |= 0x00000080; 882 *sas_address = (u64)hash_address.wwid[0] << 56 | 883 (u64)hash_address.wwid[1] << 48 | (u64)hash_address.wwid[2] << 40 | 884 (u64)hash_address.wwid[3] << 32 | (u64)hash_address.wwid[4] << 24 | 885 (u64)hash_address.wwid[5] << 16 | (u64)hash_address.wwid[6] << 8 | 886 (u64)hash_address.wwid[7]; 887 return 0; 888 } 889 890 static int 891 mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle, 892 Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz, u32 devinfo) 893 { 894 Mpi2SataPassthroughRequest_t *mpi_request; 895 Mpi2SataPassthroughReply_t *reply; 896 struct mpr_command *cm; 897 char *buffer; 898 int error = 0; 899 900 buffer = malloc( sz, M_MPR, M_NOWAIT | M_ZERO); 901 if (!buffer) 902 return ENOMEM; 903 904 if ((cm = mpr_alloc_command(sc)) == NULL) { 905 free(buffer, M_MPR); 906 return (EBUSY); 907 } 908 mpi_request = (MPI2_SATA_PASSTHROUGH_REQUEST *)cm->cm_req; 909 bzero(mpi_request,sizeof(MPI2_SATA_PASSTHROUGH_REQUEST)); 910 mpi_request->Function = MPI2_FUNCTION_SATA_PASSTHROUGH; 911 mpi_request->VF_ID = 0; 912 mpi_request->DevHandle = htole16(handle); 913 mpi_request->PassthroughFlags = (MPI2_SATA_PT_REQ_PT_FLAGS_PIO | 914 MPI2_SATA_PT_REQ_PT_FLAGS_READ); 915 mpi_request->DataLength = htole32(sz); 916 mpi_request->CommandFIS[0] = 0x27; 917 mpi_request->CommandFIS[1] = 0x80; 918 mpi_request->CommandFIS[2] = (devinfo & 919 MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? 0xA1 : 0xEC; 920 cm->cm_sge = &mpi_request->SGL; 921 cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); 922 cm->cm_flags = MPR_CM_FLAGS_DATAIN; 923 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 924 cm->cm_data = buffer; 925 cm->cm_length = htole32(sz); 926 error = mpr_wait_command(sc, cm, 60, CAN_SLEEP); 927 reply = (Mpi2SataPassthroughReply_t *)cm->cm_reply; 928 if (error || (reply == NULL)) { 929 /* FIXME */ 930 /* 931 * If the request returns an error then we need to do a diag 932 * reset 933 */ 934 printf("%s: request for page completed with error %d", 935 __func__, error); 936 error = ENXIO; 937 goto out; 938 } 939 bcopy(buffer, id_buffer, sz); 940 bcopy(reply, mpi_reply, sizeof(Mpi2SataPassthroughReply_t)); 941 if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) != 942 MPI2_IOCSTATUS_SUCCESS) { 943 printf("%s: error reading SATA PASSTHRU; iocstatus = 0x%x\n", 944 __func__, reply->IOCStatus); 945 error = ENXIO; 946 goto out; 947 } 948 out: 949 mpr_free_command(sc, cm); 950 free(buffer, M_MPR); 951 return (error); 952 } 953 954 static int 955 mprsas_volume_add(struct mpr_softc *sc, u16 handle) 956 { 957 struct mprsas_softc *sassc; 958 struct mprsas_target *targ; 959 u64 wwid; 960 unsigned int id; 961 int error = 0; 962 struct mprsas_lun *lun; 963 964 sassc = sc->sassc; 965 mprsas_startup_increment(sassc); 966 /* wwid is endian safe */ 967 mpr_config_get_volume_wwid(sc, handle, &wwid); 968 if (!wwid) { 969 printf("%s: invalid WWID; cannot add volume to mapping table\n", 970 __func__); 971 error = ENXIO; 972 goto out; 973 } 974 975 id = mpr_mapping_get_raid_id(sc, wwid, handle); 976 if (id == MPR_MAP_BAD_ID) { 977 printf("%s: could not get ID for volume with handle 0x%04x and " 978 "WWID 0x%016llx\n", __func__, handle, 979 (unsigned long long)wwid); 980 error = ENXIO; 981 goto out; 982 } 983 984 targ = &sassc->targets[id]; 985 targ->tid = id; 986 targ->handle = handle; 987 targ->devname = wwid; 988 TAILQ_INIT(&targ->commands); 989 TAILQ_INIT(&targ->timedout_commands); 990 while (!SLIST_EMPTY(&targ->luns)) { 991 lun = SLIST_FIRST(&targ->luns); 992 SLIST_REMOVE_HEAD(&targ->luns, lun_link); 993 free(lun, M_MPR); 994 } 995 SLIST_INIT(&targ->luns); 996 #if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \ 997 (__FreeBSD_version < 902502) 998 if ((sassc->flags & MPRSAS_IN_STARTUP) == 0) 999 #endif 1000 mprsas_rescan_target(sc, targ); 1001 mpr_dprint(sc, MPR_MAPPING, "RAID target id %d added (WWID = 0x%jx)\n", 1002 targ->tid, wwid); 1003 out: 1004 mprsas_startup_decrement(sassc); 1005 return (error); 1006 } 1007 1008 /** 1009 * mprsas_SSU_to_SATA_devices 1010 * @sc: per adapter object 1011 * 1012 * Looks through the target list and issues a StartStopUnit SCSI command to each 1013 * SATA direct-access device. This helps to ensure that data corruption is 1014 * avoided when the system is being shut down. This must be called after the IR 1015 * System Shutdown RAID Action is sent if in IR mode. 1016 * 1017 * Return nothing. 1018 */ 1019 static void 1020 mprsas_SSU_to_SATA_devices(struct mpr_softc *sc) 1021 { 1022 struct mprsas_softc *sassc = sc->sassc; 1023 union ccb *ccb; 1024 path_id_t pathid = cam_sim_path(sassc->sim); 1025 target_id_t targetid; 1026 struct mprsas_target *target; 1027 struct mprsas_lun *lun; 1028 char path_str[64]; 1029 struct timeval cur_time, start_time; 1030 1031 mpr_lock(sc); 1032 1033 /* 1034 * For each LUN of each target, issue a StartStopUnit command to stop 1035 * the device. 1036 */ 1037 sc->SSU_started = TRUE; 1038 sc->SSU_refcount = 0; 1039 for (targetid = 0; targetid < sc->facts->MaxTargets; targetid++) { 1040 target = &sassc->targets[targetid]; 1041 if (target->handle == 0x0) { 1042 continue; 1043 } 1044 1045 SLIST_FOREACH(lun, &target->luns, lun_link) { 1046 ccb = xpt_alloc_ccb_nowait(); 1047 if (ccb == NULL) { 1048 mpr_unlock(sc); 1049 mpr_dprint(sc, MPR_FAULT, "Unable to alloc " 1050 "CCB to stop unit.\n"); 1051 return; 1052 } 1053 1054 /* 1055 * The stop_at_shutdown flag will be set if this LUN is 1056 * a SATA direct-access end device. 1057 */ 1058 if (lun->stop_at_shutdown) { 1059 if (xpt_create_path(&ccb->ccb_h.path, 1060 xpt_periph, pathid, targetid, 1061 lun->lun_id) != CAM_REQ_CMP) { 1062 mpr_dprint(sc, MPR_FAULT, "Unable to " 1063 "create LUN path to stop unit.\n"); 1064 xpt_free_ccb(ccb); 1065 mpr_unlock(sc); 1066 return; 1067 } 1068 xpt_path_string(ccb->ccb_h.path, path_str, 1069 sizeof(path_str)); 1070 1071 mpr_dprint(sc, MPR_INFO, "Sending StopUnit: " 1072 "path %s handle %d\n", path_str, 1073 target->handle); 1074 1075 /* 1076 * Issue a START STOP UNIT command for the LUN. 1077 * Increment the SSU counter to be used to 1078 * count the number of required replies. 1079 */ 1080 mpr_dprint(sc, MPR_INFO, "Incrementing SSU " 1081 "count\n"); 1082 sc->SSU_refcount++; 1083 ccb->ccb_h.target_id = 1084 xpt_path_target_id(ccb->ccb_h.path); 1085 ccb->ccb_h.target_lun = lun->lun_id; 1086 ccb->ccb_h.ppriv_ptr1 = sassc; 1087 scsi_start_stop(&ccb->csio, 1088 /*retries*/0, 1089 mprsas_stop_unit_done, 1090 MSG_SIMPLE_Q_TAG, 1091 /*start*/FALSE, 1092 /*load/eject*/0, 1093 /*immediate*/FALSE, 1094 MPR_SENSE_LEN, 1095 /*timeout*/10000); 1096 xpt_action(ccb); 1097 } 1098 } 1099 } 1100 1101 mpr_unlock(sc); 1102 1103 /* 1104 * Wait until all of the SSU commands have completed or time has 1105 * expired (60 seconds). pause for 100ms each time through. If any 1106 * command times out, the target will be reset in the SCSI command 1107 * timeout routine. 1108 */ 1109 getmicrotime(&start_time); 1110 while (sc->SSU_refcount) { 1111 pause("mprwait", hz/10); 1112 1113 getmicrotime(&cur_time); 1114 if ((cur_time.tv_sec - start_time.tv_sec) > 60) { 1115 mpr_dprint(sc, MPR_FAULT, "Time has expired waiting " 1116 "for SSU commands to complete.\n"); 1117 break; 1118 } 1119 } 1120 } 1121 1122 static void 1123 mprsas_stop_unit_done(struct cam_periph *periph, union ccb *done_ccb) 1124 { 1125 struct mprsas_softc *sassc; 1126 char path_str[64]; 1127 1128 sassc = (struct mprsas_softc *)done_ccb->ccb_h.ppriv_ptr1; 1129 1130 xpt_path_string(done_ccb->ccb_h.path, path_str, sizeof(path_str)); 1131 mpr_dprint(sassc->sc, MPR_INFO, "Completing stop unit for %s\n", 1132 path_str); 1133 1134 if (done_ccb == NULL) 1135 return; 1136 1137 /* 1138 * Nothing more to do except free the CCB and path. If the command 1139 * timed out, an abort reset, then target reset will be issued during 1140 * the SCSI Command process. 1141 */ 1142 xpt_free_path(done_ccb->ccb_h.path); 1143 xpt_free_ccb(done_ccb); 1144 } 1145 1146 /** 1147 * mprsas_ir_shutdown - IR shutdown notification 1148 * @sc: per adapter object 1149 * 1150 * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that 1151 * the host system is shutting down. 1152 * 1153 * Return nothing. 1154 */ 1155 void 1156 mprsas_ir_shutdown(struct mpr_softc *sc) 1157 { 1158 u16 volume_mapping_flags; 1159 u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags); 1160 struct dev_mapping_table *mt_entry; 1161 u32 start_idx, end_idx; 1162 unsigned int id, found_volume = 0; 1163 struct mpr_command *cm; 1164 Mpi2RaidActionRequest_t *action; 1165 1166 mpr_dprint(sc, MPR_TRACE, "%s\n", __func__); 1167 1168 /* is IR firmware build loaded? */ 1169 if (!sc->ir_firmware) 1170 goto out; 1171 1172 /* are there any volumes? Look at IR target IDs. */ 1173 // TODO-later, this should be looked up in the RAID config structure 1174 // when it is implemented. 1175 volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) & 1176 MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; 1177 if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { 1178 start_idx = 0; 1179 if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0) 1180 start_idx = 1; 1181 } else 1182 start_idx = sc->max_devices - sc->max_volumes; 1183 end_idx = start_idx + sc->max_volumes - 1; 1184 1185 for (id = start_idx; id < end_idx; id++) { 1186 mt_entry = &sc->mapping_table[id]; 1187 if ((mt_entry->physical_id != 0) && 1188 (mt_entry->missing_count == 0)) { 1189 found_volume = 1; 1190 break; 1191 } 1192 } 1193 1194 if (!found_volume) 1195 goto out; 1196 1197 if ((cm = mpr_alloc_command(sc)) == NULL) { 1198 printf("%s: command alloc failed\n", __func__); 1199 goto out; 1200 } 1201 1202 action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req; 1203 action->Function = MPI2_FUNCTION_RAID_ACTION; 1204 action->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; 1205 cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; 1206 mpr_lock(sc); 1207 mpr_wait_command(sc, cm, 5, CAN_SLEEP); 1208 mpr_unlock(sc); 1209 1210 /* 1211 * Don't check for reply, just leave. 1212 */ 1213 if (cm) 1214 mpr_free_command(sc, cm); 1215 1216 out: 1217 mprsas_SSU_to_SATA_devices(sc); 1218 } 1219