xref: /freebsd/sys/dev/mpr/mpr_sas.h (revision 7fdf597e96a02165cfe22ff357b857d5fa15ed8a)
1 /*-
2  * Copyright (c) 2011-2015 LSI Corp.
3  * Copyright (c) 2013-2016 Avago Technologies
4  * Copyright 2000-2020 Broadcom Inc.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * Broadcom Inc. (LSI) MPT-Fusion Host Adapter FreeBSD
29  */
30 
31 struct mpr_fw_event_work;
32 
33 struct mprsas_lun {
34 	SLIST_ENTRY(mprsas_lun) lun_link;
35 	lun_id_t	lun_id;
36 	uint8_t		eedp_formatted;
37 	uint32_t	eedp_block_size;
38 };
39 
40 struct mprsas_target {
41 	uint16_t	handle;
42 	uint8_t		linkrate;
43 	uint8_t		encl_level_valid;
44 	uint8_t		encl_level;
45 	char		connector_name[4];
46 	uint64_t	devname;
47 	uint32_t	devinfo;
48 	uint16_t	encl_handle;
49 	uint16_t	encl_slot;
50 	uint8_t		flags;
51 #define MPRSAS_TARGET_INABORT	(1 << 0)
52 #define MPRSAS_TARGET_INRESET	(1 << 1)
53 #define MPRSAS_TARGET_INDIAGRESET (1 << 2)
54 #define MPRSAS_TARGET_INREMOVAL	(1 << 3)
55 #define MPR_TARGET_FLAGS_RAID_COMPONENT (1 << 4)
56 #define MPR_TARGET_FLAGS_VOLUME         (1 << 5)
57 #define MPR_TARGET_IS_SATA_SSD	(1 << 6)
58 #define MPRSAS_TARGET_TOREMOVE	(1 << 7)
59 
60 	uint16_t	tid;
61 	SLIST_HEAD(, mprsas_lun) luns;
62 	TAILQ_HEAD(, mpr_command) commands;
63 	struct mpr_command *tm;
64 	struct mpr_command *pending_remove_tm;
65 	TAILQ_HEAD(, mpr_command) timedout_commands;
66 	uint16_t        exp_dev_handle;
67 	uint16_t        phy_num;
68 	uint64_t	sasaddr;
69 	uint16_t	parent_handle;
70 	uint64_t	parent_sasaddr;
71 	uint32_t	parent_devinfo;
72 	uint64_t        issued;
73 	uint64_t        completed;
74 	unsigned int    outstanding;
75 	unsigned int    timeouts;
76 	unsigned int    aborts;
77 	unsigned int    logical_unit_resets;
78 	unsigned int    target_resets;
79 	uint8_t		scsi_req_desc_type;
80 	uint8_t		stop_at_shutdown;
81 	uint8_t		supports_SSU;
82 	uint8_t		is_nvme;
83 	uint32_t	MDTS;
84 	uint8_t		controller_reset_timeout;
85 };
86 
87 struct mprsas_softc {
88 	struct mpr_softc	*sc;
89 	u_int			flags;
90 #define MPRSAS_IN_DISCOVERY	(1 << 0)
91 #define MPRSAS_IN_STARTUP	(1 << 1)
92 #define MPRSAS_QUEUE_FROZEN	(1 << 3)
93 #define	MPRSAS_TOREMOVE		(1 << 5)
94 	u_int			maxtargets;
95 	struct mprsas_target	*targets;
96 	struct cam_devq		*devq;
97 	struct cam_sim		*sim;
98 	struct cam_path		*path;
99 	struct intr_config_hook	sas_ich;
100 	struct mpr_event_handle	*mprsas_eh;
101 
102 	u_int                   startup_refcount;
103 	struct proc             *sysctl_proc;
104 
105 	struct taskqueue	*ev_tq;
106 	struct task		ev_task;
107 	TAILQ_HEAD(, mpr_fw_event_work)	ev_queue;
108 };
109 
110 MALLOC_DECLARE(M_MPRSAS);
111 
112 /*
113  * Abstracted so that the driver can be backwards and forwards compatible
114  * with future versions of CAM that will provide this functionality.
115  */
116 #define MPR_SET_LUN(lun, ccblun)	\
117 	mprsas_set_lun(lun, ccblun)
118 
119 static __inline int
120 mprsas_set_lun(uint8_t *lun, u_int ccblun)
121 {
122 	uint64_t *newlun;
123 
124 	newlun = (uint64_t *)lun;
125 	*newlun = 0;
126 	if (ccblun <= 0xff) {
127 		/* Peripheral device address method, LUN is 0 to 255 */
128 		lun[1] = ccblun;
129 	} else if (ccblun <= 0x3fff) {
130 		/* Flat space address method, LUN is <= 16383 */
131 		scsi_ulto2b(ccblun, lun);
132 		lun[0] |= 0x40;
133 	} else if (ccblun <= 0xffffff) {
134 		/* Extended flat space address method, LUN is <= 16777215 */
135 		scsi_ulto3b(ccblun, &lun[1]);
136 		/* Extended Flat space address method */
137 		lun[0] = 0xc0;
138 		/* Length = 1, i.e. LUN is 3 bytes long */
139 		lun[0] |= 0x10;
140 		/* Extended Address Method */
141 		lun[0] |= 0x02;
142 	} else {
143 		return (EINVAL);
144 	}
145 
146 	return (0);
147 }
148 
149 static __inline void
150 mprsas_set_ccbstatus(union ccb *ccb, int status)
151 {
152 	ccb->ccb_h.status &= ~CAM_STATUS_MASK;
153 	ccb->ccb_h.status |= status;
154 }
155 
156 static __inline int
157 mprsas_get_ccbstatus(union ccb *ccb)
158 {
159 	return (ccb->ccb_h.status & CAM_STATUS_MASK);
160 }
161 
162 #define MPR_SET_SINGLE_LUN(req, lun)	\
163 do {					\
164 	bzero((req)->LUN, 8);		\
165 	(req)->LUN[1] = lun;		\
166 } while(0)
167 
168 void mprsas_rescan_target(struct mpr_softc *sc, struct mprsas_target *targ);
169 void mprsas_discovery_end(struct mprsas_softc *sassc);
170 void mprsas_prepare_for_tm(struct mpr_softc *sc, struct mpr_command *tm,
171     struct mprsas_target *target, lun_id_t lun_id);
172 void mprsas_startup_increment(struct mprsas_softc *sassc);
173 void mprsas_startup_decrement(struct mprsas_softc *sassc);
174 
175 void mprsas_firmware_event_work(void *arg, int pending);
176 int mprsas_check_id(struct mprsas_softc *sassc, int id);
177