1 /*- 2 * Copyright (c) 2008 Yahoo!, Inc. 3 * All rights reserved. 4 * Written by: John Baldwin <jhb@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the author nor the names of any co-contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD userland interface 31 * 32 * $FreeBSD$ 33 */ 34 /*- 35 * Copyright (c) 2011-2015 LSI Corp. 36 * Copyright (c) 2013-2015 Avago Technologies 37 * All rights reserved. 38 * 39 * Redistribution and use in source and binary forms, with or without 40 * modification, are permitted provided that the following conditions 41 * are met: 42 * 1. Redistributions of source code must retain the above copyright 43 * notice, this list of conditions and the following disclaimer. 44 * 2. Redistributions in binary form must reproduce the above copyright 45 * notice, this list of conditions and the following disclaimer in the 46 * documentation and/or other materials provided with the distribution. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 51 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 58 * SUCH DAMAGE. 59 * 60 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 61 * 62 * $FreeBSD$ 63 */ 64 65 #ifndef _MPR_IOCTL_H_ 66 #define _MPR_IOCTL_H_ 67 68 #include <dev/mpr/mpi/mpi2_type.h> 69 #include <dev/mpr/mpi/mpi2.h> 70 #include <dev/mpr/mpi/mpi2_cnfg.h> 71 #include <dev/mpr/mpi/mpi2_sas.h> 72 73 /* 74 * For the read header requests, the header should include the page 75 * type or extended page type, page number, and page version. The 76 * buffer and length are unused. The completed header is returned in 77 * the 'header' member. 78 * 79 * For the read page and write page requests, 'buf' should point to a 80 * buffer of 'len' bytes which holds the entire page (including the 81 * header). 82 * 83 * All requests specify the page address in 'page_address'. 84 */ 85 struct mpr_cfg_page_req { 86 MPI2_CONFIG_PAGE_HEADER header; 87 uint32_t page_address; 88 void *buf; 89 int len; 90 uint16_t ioc_status; 91 }; 92 93 struct mpr_ext_cfg_page_req { 94 MPI2_CONFIG_EXTENDED_PAGE_HEADER header; 95 uint32_t page_address; 96 void *buf; 97 int len; 98 uint16_t ioc_status; 99 }; 100 101 struct mpr_raid_action { 102 uint8_t action; 103 uint8_t volume_bus; 104 uint8_t volume_id; 105 uint8_t phys_disk_num; 106 uint32_t action_data_word; 107 void *buf; 108 int len; 109 uint32_t volume_status; 110 uint32_t action_data[4]; 111 uint16_t action_status; 112 uint16_t ioc_status; 113 uint8_t write; 114 }; 115 116 struct mpr_usr_command { 117 void *req; 118 uint32_t req_len; 119 void *rpl; 120 uint32_t rpl_len; 121 void *buf; 122 int len; 123 uint32_t flags; 124 }; 125 126 typedef struct mpr_pci_bits 127 { 128 union { 129 struct { 130 uint32_t DeviceNumber :5; 131 uint32_t FunctionNumber :3; 132 uint32_t BusNumber :24; 133 } bits; 134 uint32_t AsDWORD; 135 } u; 136 uint32_t PciSegmentId; 137 } mpr_pci_bits_t; 138 139 /* 140 * The following is the MPRIOCTL_GET_ADAPTER_DATA data structure. This data 141 * structure is setup so that we hopefully are properly aligned for both 142 * 32-bit and 64-bit mode applications. 143 * 144 * Adapter Type - Value = 6 = SCSI Protocol through SAS-3 adapter 145 * 146 * MPI Port Number - The PCI Function number for this device 147 * 148 * PCI Device HW Id - The PCI device number for this device 149 * 150 */ 151 #define MPRIOCTL_ADAPTER_TYPE_SAS3 6 152 typedef struct mpr_adapter_data 153 { 154 uint32_t StructureLength; 155 uint32_t AdapterType; 156 uint32_t MpiPortNumber; 157 uint32_t PCIDeviceHwId; 158 uint32_t PCIDeviceHwRev; 159 uint32_t SubSystemId; 160 uint32_t SubsystemVendorId; 161 uint32_t Reserved1; 162 uint32_t MpiFirmwareVersion; 163 uint32_t BiosVersion; 164 uint8_t DriverVersion[32]; 165 uint8_t Reserved2; 166 uint8_t ScsiId; 167 uint16_t Reserved3; 168 mpr_pci_bits_t PciInformation; 169 } mpr_adapter_data_t; 170 171 172 typedef struct mpr_update_flash 173 { 174 uint64_t PtrBuffer; 175 uint32_t ImageChecksum; 176 uint32_t ImageOffset; 177 uint32_t ImageSize; 178 uint32_t ImageType; 179 } mpr_update_flash_t; 180 181 182 #define MPR_PASS_THRU_DIRECTION_NONE 0 183 #define MPR_PASS_THRU_DIRECTION_READ 1 184 #define MPR_PASS_THRU_DIRECTION_WRITE 2 185 #define MPR_PASS_THRU_DIRECTION_BOTH 3 186 187 typedef struct mpr_pass_thru 188 { 189 uint64_t PtrRequest; 190 uint64_t PtrReply; 191 uint64_t PtrData; 192 uint32_t RequestSize; 193 uint32_t ReplySize; 194 uint32_t DataSize; 195 uint32_t DataDirection; 196 uint64_t PtrDataOut; 197 uint32_t DataOutSize; 198 uint32_t Timeout; 199 } mpr_pass_thru_t; 200 201 202 /* 203 * Event queue defines 204 */ 205 #define MPR_EVENT_QUEUE_SIZE (50) /* Max Events stored in driver */ 206 #define MPR_MAX_EVENT_DATA_LENGTH (48) /* Size of each event in Dwords */ 207 208 typedef struct mpr_event_query 209 { 210 uint16_t Entries; 211 uint16_t Reserved; 212 uint32_t Types[4]; 213 } mpr_event_query_t; 214 215 typedef struct mpr_event_enable 216 { 217 uint32_t Types[4]; 218 } mpr_event_enable_t; 219 220 /* 221 * Event record entry for ioctl. 222 */ 223 typedef struct mpr_event_entry 224 { 225 uint32_t Type; 226 uint32_t Number; 227 uint32_t Data[MPR_MAX_EVENT_DATA_LENGTH]; 228 } mpr_event_entry_t; 229 230 typedef struct mpr_event_report 231 { 232 uint32_t Size; 233 uint64_t PtrEvents; 234 } mpr_event_report_t; 235 236 237 typedef struct mpr_pci_info 238 { 239 uint32_t BusNumber; 240 uint8_t DeviceNumber; 241 uint8_t FunctionNumber; 242 uint16_t InterruptVector; 243 uint8_t PciHeader[256]; 244 } mpr_pci_info_t; 245 246 247 typedef struct mpr_diag_action 248 { 249 uint32_t Action; 250 uint32_t Length; 251 uint64_t PtrDiagAction; 252 uint32_t ReturnCode; 253 } mpr_diag_action_t; 254 255 #define MPR_FW_DIAGNOSTIC_UID_NOT_FOUND (0xFF) 256 257 #define MPR_FW_DIAG_NEW (0x806E6577) 258 259 #define MPR_FW_DIAG_TYPE_REGISTER (0x00000001) 260 #define MPR_FW_DIAG_TYPE_UNREGISTER (0x00000002) 261 #define MPR_FW_DIAG_TYPE_QUERY (0x00000003) 262 #define MPR_FW_DIAG_TYPE_READ_BUFFER (0x00000004) 263 #define MPR_FW_DIAG_TYPE_RELEASE (0x00000005) 264 265 #define MPR_FW_DIAG_INVALID_UID (0x00000000) 266 267 #define MPR_DIAG_SUCCESS 0 268 #define MPR_DIAG_FAILURE 1 269 270 #define MPR_FW_DIAG_ERROR_SUCCESS (0x00000000) 271 #define MPR_FW_DIAG_ERROR_FAILURE (0x00000001) 272 #define MPR_FW_DIAG_ERROR_INVALID_PARAMETER (0x00000002) 273 #define MPR_FW_DIAG_ERROR_POST_FAILED (0x00000010) 274 #define MPR_FW_DIAG_ERROR_INVALID_UID (0x00000011) 275 #define MPR_FW_DIAG_ERROR_RELEASE_FAILED (0x00000012) 276 #define MPR_FW_DIAG_ERROR_NO_BUFFER (0x00000013) 277 #define MPR_FW_DIAG_ERROR_ALREADY_RELEASED (0x00000014) 278 279 280 typedef struct mpr_fw_diag_register 281 { 282 uint8_t ExtendedType; 283 uint8_t BufferType; 284 uint16_t ApplicationFlags; 285 uint32_t DiagnosticFlags; 286 uint32_t ProductSpecific[23]; 287 uint32_t RequestedBufferSize; 288 uint32_t UniqueId; 289 } mpr_fw_diag_register_t; 290 291 typedef struct mpr_fw_diag_unregister 292 { 293 uint32_t UniqueId; 294 } mpr_fw_diag_unregister_t; 295 296 #define MPR_FW_DIAG_FLAG_APP_OWNED (0x0001) 297 #define MPR_FW_DIAG_FLAG_BUFFER_VALID (0x0002) 298 #define MPR_FW_DIAG_FLAG_FW_BUFFER_ACCESS (0x0004) 299 300 typedef struct mpr_fw_diag_query 301 { 302 uint8_t ExtendedType; 303 uint8_t BufferType; 304 uint16_t ApplicationFlags; 305 uint32_t DiagnosticFlags; 306 uint32_t ProductSpecific[23]; 307 uint32_t TotalBufferSize; 308 uint32_t DriverAddedBufferSize; 309 uint32_t UniqueId; 310 } mpr_fw_diag_query_t; 311 312 typedef struct mpr_fw_diag_release 313 { 314 uint32_t UniqueId; 315 } mpr_fw_diag_release_t; 316 317 #define MPR_FW_DIAG_FLAG_REREGISTER (0x0001) 318 #define MPR_FW_DIAG_FLAG_FORCE_RELEASE (0x0002) 319 320 typedef struct mpr_diag_read_buffer 321 { 322 uint8_t Status; 323 uint8_t Reserved; 324 uint16_t Flags; 325 uint32_t StartingOffset; 326 uint32_t BytesToRead; 327 uint32_t UniqueId; 328 uint64_t PtrDataBuffer; 329 } mpr_diag_read_buffer_t; 330 331 /* 332 * Register Access 333 */ 334 #define REG_IO_READ 1 335 #define REG_IO_WRITE 2 336 #define REG_MEM_READ 3 337 #define REG_MEM_WRITE 4 338 339 typedef struct mpr_reg_access 340 { 341 uint32_t Command; 342 uint32_t RegOffset; 343 uint32_t RegData; 344 } mpr_reg_access_t; 345 346 typedef struct mpr_btdh_mapping 347 { 348 uint16_t TargetID; 349 uint16_t Bus; 350 uint16_t DevHandle; 351 uint16_t Reserved; 352 } mpr_btdh_mapping_t; 353 354 #define MPRIO_MPR_COMMAND_FLAG_VERBOSE 0x01 355 #define MPRIO_MPR_COMMAND_FLAG_DEBUG 0x02 356 #define MPRIO_READ_CFG_HEADER _IOWR('M', 200, struct mpr_cfg_page_req) 357 #define MPRIO_READ_CFG_PAGE _IOWR('M', 201, struct mpr_cfg_page_req) 358 #define MPRIO_READ_EXT_CFG_HEADER _IOWR('M', 202, struct mpr_ext_cfg_page_req) 359 #define MPRIO_READ_EXT_CFG_PAGE _IOWR('M', 203, struct mpr_ext_cfg_page_req) 360 #define MPRIO_WRITE_CFG_PAGE _IOWR('M', 204, struct mpr_cfg_page_req) 361 #define MPRIO_RAID_ACTION _IOWR('M', 205, struct mpr_raid_action) 362 #define MPRIO_MPR_COMMAND _IOWR('M', 210, struct mpr_usr_command) 363 364 #define MPTIOCTL ('I') 365 #define MPTIOCTL_GET_ADAPTER_DATA _IOWR(MPTIOCTL, 1,\ 366 struct mpr_adapter_data) 367 #define MPTIOCTL_UPDATE_FLASH _IOWR(MPTIOCTL, 2,\ 368 struct mpr_update_flash) 369 #define MPTIOCTL_RESET_ADAPTER _IO(MPTIOCTL, 3) 370 #define MPTIOCTL_PASS_THRU _IOWR(MPTIOCTL, 4,\ 371 struct mpr_pass_thru) 372 #define MPTIOCTL_EVENT_QUERY _IOWR(MPTIOCTL, 5,\ 373 struct mpr_event_query) 374 #define MPTIOCTL_EVENT_ENABLE _IOWR(MPTIOCTL, 6,\ 375 struct mpr_event_enable) 376 #define MPTIOCTL_EVENT_REPORT _IOWR(MPTIOCTL, 7,\ 377 struct mpr_event_report) 378 #define MPTIOCTL_GET_PCI_INFO _IOWR(MPTIOCTL, 8,\ 379 struct mpr_pci_info) 380 #define MPTIOCTL_DIAG_ACTION _IOWR(MPTIOCTL, 9,\ 381 struct mpr_diag_action) 382 #define MPTIOCTL_REG_ACCESS _IOWR(MPTIOCTL, 10,\ 383 struct mpr_reg_access) 384 #define MPTIOCTL_BTDH_MAPPING _IOWR(MPTIOCTL, 11,\ 385 struct mpr_btdh_mapping) 386 387 #endif /* !_MPR_IOCTL_H_ */ 388