1/*- 2 * Copyright (c) 2012-2015 LSI Corp. 3 * Copyright (c) 2013-2015 Avago Technologies 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the author nor the names of any co-contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD 31 * 32 * $FreeBSD$ 33 */ 34 35 ============================== 36 Fusion-MPT MPI 2.0 / 2.5 Header File Change History 37 ============================== 38 39 Copyright (c) 2000-2015 LSI Corporation. 40 Copyright (c) 2013-2015 Avago Technologies 41 42 --------------------------------------- 43 Header Set Release Version: 02.00.33 44 Header Set Release Date: 12-05-13 45 --------------------------------------- 46 47 Filename Current version Prior version 48 ---------- --------------- ------------- 49 mpi2.h 02.00.33 02.00.32 50 mpi2_cnfg.h 02.00.27 02.00.26 51 mpi2_init.h 02.00.15 02.00.15 52 mpi2_ioc.h 02.00.24 02.00.23 53 mpi2_raid.h 02.00.10 02.00.10 54 mpi2_sas.h 02.00.08 02.00.08 55 mpi2_targ.h 02.00.06 02.00.06 56 mpi2_tool.h 02.00.11 02.00.11 57 mpi2_type.h 02.00.00 02.00.00 58 mpi2_ra.h 02.00.00 02.00.00 59 mpi2_hbd.h 02.00.02 02.00.02 60 mpi2_history.txt 02.00.33 02.00.32 61 62 63 * Date Version Description 64 * -------- -------- ------------------------------------------------------ 65 66mpi2.h 67 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 68 * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. 69 * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. 70 * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. 71 * Moved ReplyPostHostIndex register to offset 0x6C of the 72 * MPI2_SYSTEM_INTERFACE_REGS and modified the define for 73 * MPI2_REPLY_POST_HOST_INDEX_OFFSET. 74 * Added union of request descriptors. 75 * Added union of reply descriptors. 76 * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. 77 * Added define for MPI2_VERSION_02_00. 78 * Fixed the size of the FunctionDependent5 field in the 79 * MPI2_DEFAULT_REPLY structure. 80 * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. 81 * Removed the MPI-defined Fault Codes and extended the 82 * product specific codes up to 0xEFFF. 83 * Added a sixth key value for the WriteSequence register 84 * and changed the flush value to 0x0. 85 * Added message function codes for Diagnostic Buffer Post 86 * and Diagnsotic Release. 87 * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED 88 * Moved MPI2_VERSION_UNION from mpi2_ioc.h. 89 * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. 90 * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. 91 * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. 92 * Added #defines for marking a reply descriptor as unused. 93 * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. 94 * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. 95 * Moved LUN field defines from mpi2_init.h. 96 * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. 97 * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT. 98 * In all request and reply descriptors, replaced VF_ID 99 * field with MSIxIndex field. 100 * Removed DevHandle field from 101 * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those 102 * bytes reserved. 103 * Added RAID Accelerator functionality. 104 * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT. 105 * 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT. 106 * Added MSI-x index mask and shift for Reply Post Host 107 * Index register. 108 * Added function code for Host Based Discovery Action. 109 * 02-10-10 02.00.15 Bumped MPI2_HEADER_VERSION_UNIT. 110 * Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL. 111 * Added defines for product-specific range of message 112 * function codes, 0xF0 to 0xFF. 113 * 05-12-10 02.00.16 Bumped MPI2_HEADER_VERSION_UNIT. 114 * Added alternative defines for the SGE Direction bit. 115 * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. 116 * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. 117 * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. 118 * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. 119 * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. 120 * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. 121 * 05-25-11 02.00.21 Bumped MPI2_HEADER_VERSION_UNIT. 122 * 08-24-11 02.00.22 Bumped MPI2_HEADER_VERSION_UNIT. 123 * 11-18-11 02.00.23 Bumped MPI2_HEADER_VERSION_UNIT. 124 * Incorporating additions for MPI v2.5. 125 * 02-06-12 02.00.24 Bumped MPI2_HEADER_VERSION_UNIT. 126 * 03-29-12 02.00.25 Bumped MPI2_HEADER_VERSION_UNIT. 127 * Added Hard Reset delay timings. 128 * 07-10-12 02.00.26 Bumped MPI2_HEADER_VERSION_UNIT. 129 * 07-26-12 02.00.27 Bumped MPI2_HEADER_VERSION_UNIT. 130 * 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. 131 * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. 132 * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. 133 * 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. 134 * 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. 135 * 08-19-13 02.00.32 Bumped MPI2_HEADER_VERSION_UNIT. 136 * 12-05-13 02.00.33 Bumped MPI2_HEADER_VERSION_UNIT. 137 * -------------------------------------------------------------------------- 138 139mpi2_cnfg.h 140 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 141 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. 142 * Added Manufacturing Page 11. 143 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE 144 * define. 145 * 06-26-07 02.00.02 Adding generic structure for product-specific 146 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. 147 * Rework of BIOS Page 2 configuration page. 148 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the 149 * forms. 150 * Added configuration pages IOC Page 8 and Driver 151 * Persistent Mapping Page 0. 152 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated 153 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, 154 * RAID Physical Disk Pages 0 and 1, RAID Configuration 155 * Page 0). 156 * Added new value for AccessStatus field of SAS Device 157 * Page 0 (_SATA_NEEDS_INITIALIZATION). 158 * 10-31-07 02.00.04 Added missing SEPDevHandle field to 159 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 160 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for 161 * NVDATA. 162 * Modified IOC Page 7 to use masks and added field for 163 * SASBroadcastPrimitiveMasks. 164 * Added MPI2_CONFIG_PAGE_BIOS_4. 165 * Added MPI2_CONFIG_PAGE_LOG_0. 166 * 02-29-08 02.00.06 Modified various names to make them 32-character unique. 167 * Added SAS Device IDs. 168 * Updated Integrated RAID configuration pages including 169 * Manufacturing Page 4, IOC Page 6, and RAID Configuration 170 * Page 0. 171 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. 172 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. 173 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. 174 * Added missing MaxNumRoutedSasAddresses field to 175 * MPI2_CONFIG_PAGE_EXPANDER_0. 176 * Added SAS Port Page 0. 177 * Modified structure layout for 178 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. 179 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use 180 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. 181 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF 182 * to 0x000000FF. 183 * Added two new values for the Physical Disk Coercion Size 184 * bits in the Flags field of Manufacturing Page 4. 185 * Added product-specific Manufacturing pages 16 to 31. 186 * Modified Flags bits for controlling write cache on SATA 187 * drives in IO Unit Page 1. 188 * Added new bit to AdditionalControlFlags of SAS IO Unit 189 * Page 1 to control Invalid Topology Correction. 190 * Added SupportedPhysDisks field to RAID Volume Page 1 and 191 * added related defines. 192 * Added additional defines for RAID Volume Page 0 193 * VolumeStatusFlags field. 194 * Modified meaning of RAID Volume Page 0 VolumeSettings 195 * define for auto-configure of hot-swap drives. 196 * Added PhysDiskAttributes field (and related defines) to 197 * RAID Physical Disk Page 0. 198 * Added MPI2_SAS_PHYINFO_PHY_VACANT define. 199 * Added three new DiscoveryStatus bits for SAS IO Unit 200 * Page 0 and SAS Expander Page 0. 201 * Removed multiplexing information from SAS IO Unit pages. 202 * Added BootDeviceWaitTime field to SAS IO Unit Page 4. 203 * Removed Zone Address Resolved bit from PhyInfo and from 204 * Expander Page 0 Flags field. 205 * Added two new AccessStatus values to SAS Device Page 0 206 * for indicating routing problems. Added 3 reserved words 207 * to this page. 208 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. 209 * Inserted missing reserved field into structure for IOC 210 * Page 6. 211 * Added more pending task bits to RAID Volume Page 0 212 * VolumeStatusFlags defines. 213 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. 214 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 215 * and SAS Expander Page 0 to flag a downstream initiator 216 * when in simplified routing mode. 217 * Removed SATA Init Failure defines for DiscoveryStatus 218 * fields of SAS IO Unit Page 0 and SAS Expander Page 0. 219 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. 220 * Added PortGroups, DmaGroup, and ControlGroup fields to 221 * SAS Device Page 0. 222 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO 223 * Unit Page 6. 224 * Added expander reduced functionality data to SAS 225 * Expander Page 0. 226 * Added SAS PHY Page 2 and SAS PHY Page 3. 227 * 07-30-09 02.00.12 Added IO Unit Page 7. 228 * Added new device ids. 229 * Added SAS IO Unit Page 5. 230 * Added partial and slumber power management capable flags 231 * to SAS Device Page 0 Flags field. 232 * Added PhyInfo defines for power condition. 233 * Added Ethernet configuration pages. 234 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY. 235 * Added SAS PHY Page 4 structure and defines. 236 * 02-10-10 02.00.14 Modified the comments for the configuration page 237 * structures that contain an array of data. The host 238 * should use the "count" field in the page data (e.g. the 239 * NumPhys field) to determine the number of valid elements 240 * in the array. 241 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines. 242 * Added PowerManagementCapabilities to IO Unit Page 7. 243 * Added PortWidthModGroup field to 244 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS. 245 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines. 246 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines. 247 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines. 248 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT 249 * define. 250 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define. 251 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define. 252 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing) 253 * defines. 254 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to 255 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for 256 * the Pinout field. 257 * Added BoardTemperature and BoardTemperatureUnits fields 258 * to MPI2_CONFIG_PAGE_IO_UNIT_7. 259 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define 260 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. 261 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. 262 * Added IO Unit Page 8, IO Unit Page 9, 263 * and IO Unit Page 10. 264 * Added SASNotifyPrimitiveMasks field to 265 * MPI2_CONFIG_PAGE_IOC_7. 266 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). 267 * 05-25-11 02.00.20 Cleaned up a few comments. 268 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities 269 * for PCIe link as obsolete. 270 * Added SpinupFlags field containing a Disable Spin-up bit 271 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO 272 * Unit Page 4. 273 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT. 274 * Added UEFIVersion field to BIOS Page 1 and defined new 275 * BiosOptions bits. 276 * Incorporating additions for MPI v2.5. 277 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER. 278 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID. 279 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as 280 * obsolete for MPI v2.5 and later. 281 * Added some defines for 12G SAS speeds. 282 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. 283 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to 284 * match the specification. 285 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for 286 * future use. 287 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for 288 * MPI2_CONFIG_PAGE_MAN_7. 289 * Added EnclosureLevel and ConnectorName fields to 290 * MPI2_CONFIG_PAGE_SAS_DEV_0. 291 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for 292 * MPI2_CONFIG_PAGE_SAS_DEV_0. 293 * Added EnclosureLevel field to 294 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 295 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for 296 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. 297 * -------------------------------------------------------------------------- 298 299mpi2_init.h 300 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 301 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. 302 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. 303 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. 304 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. 305 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. 306 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO 307 * Control field Task Attribute flags. 308 * Moved LUN field defines to mpi2.h because they are 309 * common to many structures. 310 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to 311 * Query Asynchronous Event. 312 * Defined two new bits in the SlotStatus field of the SCSI 313 * Enclosure Processor Request and Reply. 314 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for 315 * both SCSI IO Error Reply and SCSI Task Management Reply. 316 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY. 317 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define. 318 * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it. 319 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request. 320 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define. 321 * 11-18-11 02.00.12 Incorporating additions for MPI v2.5. 322 * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command 323 * Priority to match SAM-4. 324 * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. 325 * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. 326 * -------------------------------------------------------------------------- 327 328mpi2_ioc.h 329 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 330 * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to 331 * MaxTargets. 332 * Added TotalImageSize field to FWDownload Request. 333 * Added reserved words to FWUpload Request. 334 * 06-26-07 02.00.02 Added IR Configuration Change List Event. 335 * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit 336 * request and replaced it with 337 * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. 338 * Replaced the MinReplyQueueDepth field of the IOCFacts 339 * reply with MaxReplyDescriptorPostQueueDepth. 340 * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum 341 * depth for the Reply Descriptor Post Queue. 342 * Added SASAddress field to Initiator Device Table 343 * Overflow Event data. 344 * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING 345 * for SAS Initiator Device Status Change Event data. 346 * Modified Reason Code defines for SAS Topology Change 347 * List Event data, including adding a bit for PHY Vacant 348 * status, and adding a mask for the Reason Code. 349 * Added define for 350 * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. 351 * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. 352 * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of 353 * the IOCFacts Reply. 354 * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 355 * Moved MPI2_VERSION_UNION to mpi2.h. 356 * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks 357 * instead of enables, and added SASBroadcastPrimitiveMasks 358 * field. 359 * Added Log Entry Added Event and related structure. 360 * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. 361 * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. 362 * Added MaxVolumes and MaxPersistentEntries fields to 363 * IOCFacts reply. 364 * Added ProtocalFlags and IOCCapabilities fields to 365 * MPI2_FW_IMAGE_HEADER. 366 * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. 367 * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to 368 * a U16 (from a U32). 369 * Removed extra 's' from EventMasks name. 370 * 06-27-08 02.00.08 Fixed an offset in a comment. 371 * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. 372 * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and 373 * renamed MinReplyFrameSize to ReplyFrameSize. 374 * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. 375 * Added two new RAIDOperation values for Integrated RAID 376 * Operations Status Event data. 377 * Added four new IR Configuration Change List Event data 378 * ReasonCode values. 379 * Added two new ReasonCode defines for SAS Device Status 380 * Change Event data. 381 * Added three new DiscoveryStatus bits for the SAS 382 * Discovery event data. 383 * Added Multiplexing Status Change bit to the PhyStatus 384 * field of the SAS Topology Change List event data. 385 * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. 386 * BootFlags are now product-specific. 387 * Added defines for the indivdual signature bytes 388 * for MPI2_INIT_IMAGE_FOOTER. 389 * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. 390 * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR 391 * define. 392 * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE 393 * define. 394 * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. 395 * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define. 396 * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define. 397 * Added two new reason codes for SAS Device Status Change 398 * Event. 399 * Added new event: SAS PHY Counter. 400 * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure. 401 * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. 402 * Added new product id family for 2208. 403 * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST. 404 * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY. 405 * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY. 406 * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY. 407 * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define. 408 * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define. 409 * Added Host Based Discovery Phy Event data. 410 * Added defines for ProductID Product field 411 * (MPI2_FW_HEADER_PID_). 412 * Modified values for SAS ProductID Family 413 * (MPI2_FW_HEADER_PID_FAMILY_). 414 * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines. 415 * Added PowerManagementControl Request structures and 416 * defines. 417 * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. 418 * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. 419 * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. 420 * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added 421 * SASNotifyPrimitiveMasks field to 422 * MPI2_EVENT_NOTIFICATION_REQUEST. 423 * Added Temperature Threshold Event. 424 * Added Host Message Event. 425 * Added Send Host Message request and reply. 426 * 05-25-11 02.00.18 For Extended Image Header, added 427 * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and 428 * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines. 429 * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define. 430 * 08-24-11 02.00.19 Added PhysicalPort field to 431 * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure. 432 * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete. 433 * 11-18-11 02.00.20 Incorporating additions for MPI v2.5. 434 * 03-29-12 02.00.21 Added a product specific range to event values. 435 * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE. 436 * Added ElapsedSeconds field to 437 * MPI2_EVENT_DATA_IR_OPERATION_STATUS. 438 * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE 439 * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY. 440 * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE. 441 * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY. 442 * Added Encrypted Hash Extended Image. 443 * 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS. 444 * -------------------------------------------------------------------------- 445 446mpi2_raid.h 447 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 448 * 08-31-07 02.00.01 Modifications to RAID Action request and reply, 449 * including the Actions and ActionData. 450 * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. 451 * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that 452 * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT 453 * can be sized by the build environment. 454 * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of 455 * VolumeCreationFlags and marked the old one as obsolete. 456 * 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define. 457 * 08-24-10 02.00.06 Added MPI2_RAID_ACTION_COMPATIBILITY_CHECK along with 458 * related structures and defines. 459 * Added product-specific range to RAID Action values. 460 * 11-18-11 02.00.07 Incorporating additions for MPI v2.5. 461 * 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. 462 * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. 463 * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. 464 * 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI. 465 * -------------------------------------------------------------------------- 466 467mpi2_sas.h 468 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 469 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit 470 * Control Request. 471 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control 472 * Request. 473 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST 474 * to MPI2_SGE_IO_UNION since it supports chained SGLs. 475 * 05-12-10 02.00.04 Modified some comments. 476 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control. 477 * 11-18-11 02.00.06 Incorporating additions for MPI v2.5. 478 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA 479 * Passthrough Request message. 480 * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete 481 * for anything newer than MPI v2.0. 482 * -------------------------------------------------------------------------- 483 484mpi2_targ.h 485 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 486 * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to 487 * BufferPostFlags field of CommandBufferPostBase Request. 488 * 02-29-08 02.00.02 Modified various names to make them 32-character unique. 489 * 10-02-08 02.00.03 Removed NextCmdBufferOffset from 490 * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST. 491 * Target Status Send Request only takes a single SGE for 492 * response data. 493 * 02-10-10 02.00.04 Added comment to MPI2_TARGET_SSP_RSP_IU structure. 494 * 11-18-11 02.00.05 Incorporating additions for MPI v2.5. 495 * 11-27-12 02.00.06 Added InitiatorDevHandle field to MPI2_TARGET_MODE_ABORT 496 * request message structure. 497 * Added AbortType MPI2_TARGET_MODE_ABORT_DEVHANDLE and 498 * MPI2_TARGET_MODE_ABORT_ALL_COMMANDS. 499 * -------------------------------------------------------------------------- 500 501mpi2_tool.h 502 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 503 * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release 504 * structures and defines. 505 * 02-29-08 02.00.02 Modified various names to make them 32-character unique. 506 * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool. 507 * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request 508 * and reply messages. 509 * Added MPI2_DIAG_BUF_TYPE_EXTENDED. 510 * Incremented MPI2_DIAG_BUF_TYPE_COUNT. 511 * 05-12-10 02.00.05 Added Diagnostic Data Upload tool. 512 * 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer 513 * Post Request. 514 * 05-25-11 02.00.07 Added Flags field and related defines to 515 * MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST. 516 * 11-18-11 02.00.08 Incorporating additions for MPI v2.5. 517 * 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request 518 * message. 519 * 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that 520 * it uses MPI Chain SGE as well as MPI Simple SGE. 521 * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. 522 * -------------------------------------------------------------------------- 523 524mpi2_type.h 525 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. 526 * -------------------------------------------------------------------------- 527 528mpi2_ra.h 529 * 05-06-09 02.00.00 Initial version. 530 * -------------------------------------------------------------------------- 531 532mpi2_hbd.h 533 * 10-28-09 02.00.00 Initial version. 534 * 08-11-10 02.00.01 Removed PortGroups, DmaGroup, and ControlGroup from 535 * HBD Action request, replaced by AdditionalInfo field. 536 * 11-18-11 02.00.02 Incorporating additions for MPI v2.5. 537 * -------------------------------------------------------------------------- 538 539 540mpi2_history.txt Parts list history 541 542Filename 02.00.33 02.00.32 02.00.31 02.00.30 543---------- -------- -------- -------- -------- 544mpi2.h 02.00.33 02.00.32 02.00.31 02.00.30 545mpi2_cnfg.h 02.00.27 02.00.26 02.00.25 02.00.25 546mpi2_init.h 02.00.15 02.00.15 02.00.15 02.00.15 547mpi2_ioc.h 02.00.24 02.00.23 02.00.22 02.00.22 548mpi2_raid.h 02.00.10 02.00.10 02.00.10 02.00.09 549mpi2_sas.h 02.00.08 02.00.08 02.00.07 02.00.07 550mpi2_targ.h 02.00.06 02.00.06 02.00.06 02.00.06 551mpi2_tool.h 02.00.11 02.00.11 02.00.10 02.00.10 552mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 553mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 554mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 555 556Filename 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.24 557---------- -------- -------- -------- -------- -------- -------- 558mpi2.h 02.00.29 02.00.28 02.00.27 02.00.26 02.00.25 02.00.24 559mpi2_cnfg.h 02.00.24 02.00.23 02.00.22 02.00.22 02.00.22 02.00.22 560mpi2_init.h 02.00.14 02.00.14 02.00.14 02.00.14 02.00.13 02.00.13 561mpi2_ioc.h 02.00.22 02.00.22 02.00.22 02.00.21 02.00.21 02.00.20 562mpi2_raid.h 02.00.09 02.00.09 02.00.09 02.00.08 02.00.08 02.00.08 563mpi2_sas.h 02.00.07 02.00.07 02.00.07 02.00.07 02.00.06 02.00.06 564mpi2_targ.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 565mpi2_tool.h 02.00.10 02.00.10 02.00.10 02.00.09 02.00.08 02.00.08 566mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 567mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 568mpi2_hbd.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 569 570Filename 02.00.23 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 571---------- -------- -------- -------- -------- -------- -------- 572mpi2.h 02.00.23 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 573mpi2_cnfg.h 02.00.22 02.00.21 02.00.20 02.00.19 02.00.18 02.00.17 574mpi2_init.h 02.00.12 02.00.11 02.00.11 02.00.11 02.00.11 02.00.11 575mpi2_ioc.h 02.00.20 02.00.19 02.00.18 02.00.17 02.00.17 02.00.16 576mpi2_raid.h 02.00.07 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 577mpi2_sas.h 02.00.06 02.00.05 02.00.05 02.00.05 02.00.05 02.00.05 578mpi2_targ.h 02.00.05 02.00.04 02.00.04 02.00.04 02.00.04 02.00.04 579mpi2_tool.h 02.00.08 02.00.07 02.00.07 02.00.06 02.00.06 02.00.06 580mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 581mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 582mpi2_hbd.h 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 02.00.01 583 584Filename 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 585---------- -------- -------- -------- -------- -------- -------- 586mpi2.h 02.00.17 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 587mpi2_cnfg.h 02.00.16 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11 588mpi2_init.h 02.00.10 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 589mpi2_ioc.h 02.00.15 02.00.15 02.00.14 02.00.13 02.00.12 02.00.11 590mpi2_raid.h 02.00.05 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03 591mpi2_sas.h 02.00.05 02.00.04 02.00.03 02.00.03 02.00.02 02.00.02 592mpi2_targ.h 02.00.04 02.00.04 02.00.04 02.00.03 02.00.03 02.00.03 593mpi2_tool.h 02.00.06 02.00.05 02.00.04 02.00.04 02.00.04 02.00.03 594mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 595mpi2_ra.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 596mpi2_hbd.h 02.00.01 02.00.00 02.00.00 02.00.00 597 598Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 599---------- -------- -------- -------- -------- -------- -------- 600mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 601mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06 602mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03 603mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06 604mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02 605mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01 606mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02 607mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 608mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 609 610Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 611---------- -------- -------- -------- -------- -------- -------- 612mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 613mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 614mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 615mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00 616mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 617mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 618mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00 619mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 620mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 621 622