1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2006 M. Warner Losh <imp@FreeBSD.org> 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * Portions of this software may have been developed with reference to 27 * the SD Simplified Specification. The following disclaimer may apply: 28 * 29 * The following conditions apply to the release of the simplified 30 * specification ("Simplified Specification") by the SD Card Association and 31 * the SD Group. The Simplified Specification is a subset of the complete SD 32 * Specification which is owned by the SD Card Association and the SD 33 * Group. This Simplified Specification is provided on a non-confidential 34 * basis subject to the disclaimers below. Any implementation of the 35 * Simplified Specification may require a license from the SD Card 36 * Association, SD Group, SD-3C LLC or other third parties. 37 * 38 * Disclaimers: 39 * 40 * The information contained in the Simplified Specification is presented only 41 * as a standard specification for SD Cards and SD Host/Ancillary products and 42 * is provided "AS-IS" without any representations or warranties of any 43 * kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD 44 * Card Association for any damages, any infringements of patents or other 45 * right of the SD Group, SD-3C LLC, the SD Card Association or any third 46 * parties, which may result from its use. No license is granted by 47 * implication, estoppel or otherwise under any patent or other rights of the 48 * SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing 49 * herein shall be construed as an obligation by the SD Group, the SD-3C LLC 50 * or the SD Card Association to disclose or distribute any technical 51 * information, know-how or other confidential information to any third party. 52 * 53 * $FreeBSD$ 54 */ 55 56 #ifndef DEV_MMC_BRIDGE_H 57 #define DEV_MMC_BRIDGE_H 58 59 #include <sys/bus.h> 60 61 /* 62 * This file defines interfaces for the mmc bridge. The names chosen 63 * are similar to or the same as the names used in Linux to allow for 64 * easy porting of what Linux calls mmc host drivers. I use the 65 * FreeBSD terminology of bridge and bus for consistency with other 66 * drivers in the system. This file corresponds roughly to the Linux 67 * linux/mmc/host.h file. 68 * 69 * A mmc bridge is a chipset that can have one or more mmc and/or sd 70 * cards attached to it. mmc devices are attached on a bus topology, 71 * while sd and sdio cards usually are attached using a star topology 72 * (meaning in practice each sd card has its own, independent slot). 73 * Since SDHCI v3.00, buses for esd and esdio are possible, though. 74 * 75 * Attached to the mmc bridge is an mmcbus. The mmcbus is described 76 * in dev/mmc/mmcbus_if.m. 77 */ 78 79 /* 80 * mmc_ios is a structure that is used to store the state of the mmc/sd 81 * bus configuration. This include the bus' clock speed, its voltage, 82 * the bus mode for command output, the SPI chip select, some power 83 * states and the bus width. 84 */ 85 enum mmc_vdd { 86 vdd_150 = 0, vdd_155, vdd_160, vdd_165, vdd_170, vdd_180, 87 vdd_190, vdd_200, vdd_210, vdd_220, vdd_230, vdd_240, vdd_250, 88 vdd_260, vdd_270, vdd_280, vdd_290, vdd_300, vdd_310, vdd_320, 89 vdd_330, vdd_340, vdd_350, vdd_360 90 }; 91 92 enum mmc_vccq { 93 vccq_120 = 0, vccq_180, vccq_330 94 }; 95 96 enum mmc_power_mode { 97 power_off = 0, power_up, power_on 98 }; 99 100 enum mmc_bus_mode { 101 opendrain = 1, pushpull 102 }; 103 104 enum mmc_chip_select { 105 cs_dontcare = 0, cs_high, cs_low 106 }; 107 108 enum mmc_bus_width { 109 bus_width_1 = 0, bus_width_4 = 2, bus_width_8 = 3 110 }; 111 112 enum mmc_drv_type { 113 drv_type_b = 0, drv_type_a, drv_type_c, drv_type_d 114 }; 115 116 enum mmc_bus_timing { 117 bus_timing_normal = 0, bus_timing_hs, bus_timing_uhs_sdr12, 118 bus_timing_uhs_sdr25, bus_timing_uhs_sdr50, bus_timing_uhs_ddr50, 119 bus_timing_uhs_sdr104, bus_timing_mmc_ddr52, bus_timing_mmc_hs200, 120 bus_timing_mmc_hs400, bus_timing_mmc_hs400es, bus_timing_max = 121 bus_timing_mmc_hs400es 122 }; 123 124 struct mmc_ios { 125 uint32_t clock; /* Speed of the clock in Hz to move data */ 126 enum mmc_vdd vdd; /* Voltage to apply to the power pins */ 127 enum mmc_vccq vccq; /* Voltage to use for signaling */ 128 enum mmc_bus_mode bus_mode; 129 enum mmc_chip_select chip_select; 130 enum mmc_bus_width bus_width; 131 enum mmc_power_mode power_mode; 132 enum mmc_bus_timing timing; 133 enum mmc_drv_type drv_type; 134 }; 135 136 enum mmc_card_mode { 137 mode_mmc, mode_sd 138 }; 139 140 enum mmc_retune_req { 141 retune_req_none = 0, retune_req_normal, retune_req_reset 142 }; 143 144 struct mmc_host { 145 int f_min; 146 int f_max; 147 uint32_t host_ocr; 148 uint32_t ocr; 149 uint32_t caps; 150 #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can do 4-bit data transfers */ 151 #define MMC_CAP_8_BIT_DATA (1 << 1) /* Can do 8-bit data transfers */ 152 #define MMC_CAP_HSPEED (1 << 2) /* Can do High Speed transfers */ 153 #define MMC_CAP_BOOT_NOACC (1 << 4) /* Cannot access boot partitions */ 154 #define MMC_CAP_WAIT_WHILE_BUSY (1 << 5) /* Host waits for busy responses */ 155 #define MMC_CAP_UHS_SDR12 (1 << 6) /* Can do UHS SDR12 */ 156 #define MMC_CAP_UHS_SDR25 (1 << 7) /* Can do UHS SDR25 */ 157 #define MMC_CAP_UHS_SDR50 (1 << 8) /* Can do UHS SDR50 */ 158 #define MMC_CAP_UHS_SDR104 (1 << 9) /* Can do UHS SDR104 */ 159 #define MMC_CAP_UHS_DDR50 (1 << 10) /* Can do UHS DDR50 */ 160 #define MMC_CAP_MMC_DDR52_120 (1 << 11) /* Can do eMMC DDR52 at 1.2 V */ 161 #define MMC_CAP_MMC_DDR52_180 (1 << 12) /* Can do eMMC DDR52 at 1.8 V */ 162 #define MMC_CAP_MMC_DDR52 (MMC_CAP_MMC_DDR52_120 | MMC_CAP_MMC_DDR52_180) 163 #define MMC_CAP_MMC_HS200_120 (1 << 13) /* Can do eMMC HS200 at 1.2 V */ 164 #define MMC_CAP_MMC_HS200_180 (1 << 14) /* Can do eMMC HS200 at 1.8 V */ 165 #define MMC_CAP_MMC_HS200 (MMC_CAP_MMC_HS200_120| MMC_CAP_MMC_HS200_180) 166 #define MMC_CAP_MMC_HS400_120 (1 << 15) /* Can do eMMC HS400 at 1.2 V */ 167 #define MMC_CAP_MMC_HS400_180 (1 << 16) /* Can do eMMC HS400 at 1.8 V */ 168 #define MMC_CAP_MMC_HS400 (MMC_CAP_MMC_HS400_120 | MMC_CAP_MMC_HS400_180) 169 #define MMC_CAP_MMC_HSX00_120 (MMC_CAP_MMC_HS200_120 | MMC_CAP_MMC_HS400_120) 170 #define MMC_CAP_MMC_ENH_STROBE (1 << 17) /* Can do eMMC Enhanced Strobe */ 171 #define MMC_CAP_SIGNALING_120 (1 << 18) /* Can do signaling at 1.2 V */ 172 #define MMC_CAP_SIGNALING_180 (1 << 19) /* Can do signaling at 1.8 V */ 173 #define MMC_CAP_SIGNALING_330 (1 << 20) /* Can do signaling at 3.3 V */ 174 #define MMC_CAP_DRIVER_TYPE_A (1 << 21) /* Can do Driver Type A */ 175 #define MMC_CAP_DRIVER_TYPE_C (1 << 22) /* Can do Driver Type C */ 176 #define MMC_CAP_DRIVER_TYPE_D (1 << 23) /* Can do Driver Type D */ 177 enum mmc_card_mode mode; 178 struct mmc_ios ios; /* Current state of the host */ 179 }; 180 181 #ifdef _KERNEL 182 extern driver_t mmc_driver; 183 184 #define MMC_VERSION 5 185 186 #define MMC_DECLARE_BRIDGE(name) \ 187 DRIVER_MODULE(mmc, name, mmc_driver, NULL, NULL); \ 188 MODULE_DEPEND(name, mmc, MMC_VERSION, MMC_VERSION, MMC_VERSION); 189 #define MMC_DEPEND(name) \ 190 MODULE_DEPEND(name, mmc, MMC_VERSION, MMC_VERSION, MMC_VERSION); 191 #endif /* _KERNEL */ 192 193 #endif /* DEV_MMC_BRIDGE_H */ 194