1 /*- 2 * Copyright (c) 2006 M. Warner Losh. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 14 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 15 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 16 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 19 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 20 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 23 * 24 * Portions of this software may have been developed with reference to 25 * the SD Simplified Specification. The following disclaimer may apply: 26 * 27 * The following conditions apply to the release of the simplified 28 * specification ("Simplified Specification") by the SD Card Association and 29 * the SD Group. The Simplified Specification is a subset of the complete SD 30 * Specification which is owned by the SD Card Association and the SD 31 * Group. This Simplified Specification is provided on a non-confidential 32 * basis subject to the disclaimers below. Any implementation of the 33 * Simplified Specification may require a license from the SD Card 34 * Association, SD Group, SD-3C LLC or other third parties. 35 * 36 * Disclaimers: 37 * 38 * The information contained in the Simplified Specification is presented only 39 * as a standard specification for SD Cards and SD Host/Ancillary products and 40 * is provided "AS-IS" without any representations or warranties of any 41 * kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD 42 * Card Association for any damages, any infringements of patents or other 43 * right of the SD Group, SD-3C LLC, the SD Card Association or any third 44 * parties, which may result from its use. No license is granted by 45 * implication, estoppel or otherwise under any patent or other rights of the 46 * SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing 47 * herein shall be construed as an obligation by the SD Group, the SD-3C LLC 48 * or the SD Card Association to disclose or distribute any technical 49 * information, know-how or other confidential information to any third party. 50 * 51 * $FreeBSD$ 52 */ 53 54 #ifndef DEV_MMC_BRIDGE_H 55 #define DEV_MMC_BRIDGE_H 56 57 #include <sys/bus.h> 58 59 /* 60 * This file defines interfaces for the mmc bridge. The names chosen 61 * are similar to or the same as the names used in Linux to allow for 62 * easy porting of what Linux calls mmc host drivers. I use the 63 * FreeBSD terminology of bridge and bus for consistency with other 64 * drivers in the system. This file corresponds roughly to the Linux 65 * linux/mmc/host.h file. 66 * 67 * A mmc bridge is a chipset that can have one or more mmc and/or sd 68 * cards attached to it. mmc cards are attached on a bus topology, 69 * while sd and sdio cards are attached using a star topology (meaning 70 * in practice each sd card has its own, independent slot). Each 71 * mmcbr is assumed to be derived from the mmcbr. This is done to 72 * allow for easier addition of bridges (as each bridge does not need 73 * to be added to the mmcbus file). 74 * 75 * Attached to the mmc bridge is an mmcbus. The mmcbus is described 76 * in dev/mmc/mmcbus_if.m. 77 */ 78 79 /* 80 * mmc_ios is a structure that is used to store the state of the mmc/sd 81 * bus configuration. This include the bus' clock speed, its voltage, 82 * the bus mode for command output, the SPI chip select, some power 83 * states and the bus width. 84 */ 85 enum mmc_vdd { 86 vdd_150 = 0, vdd_155, vdd_160, vdd_165, vdd_170, vdd_180, 87 vdd_190, vdd_200, vdd_210, vdd_220, vdd_230, vdd_240, vdd_250, 88 vdd_260, vdd_270, vdd_280, vdd_290, vdd_300, vdd_310, vdd_320, 89 vdd_330, vdd_340, vdd_350, vdd_360 90 }; 91 92 enum mmc_power_mode { 93 power_off = 0, power_up, power_on 94 }; 95 96 enum mmc_bus_mode { 97 opendrain = 1, pushpull 98 }; 99 100 enum mmc_chip_select { 101 cs_dontcare = 0, cs_high, cs_low 102 }; 103 104 enum mmc_bus_width { 105 bus_width_1 = 0, bus_width_4 = 2, bus_width_8 = 3 106 }; 107 108 enum mmc_bus_timing { 109 bus_timing_normal = 0, bus_timing_hs 110 }; 111 112 struct mmc_ios { 113 uint32_t clock; /* Speed of the clock in Hz to move data */ 114 enum mmc_vdd vdd; /* Voltage to apply to the power pins/ */ 115 enum mmc_bus_mode bus_mode; 116 enum mmc_chip_select chip_select; 117 enum mmc_bus_width bus_width; 118 enum mmc_power_mode power_mode; 119 enum mmc_bus_timing timing; 120 }; 121 122 enum mmc_card_mode { 123 mode_mmc, mode_sd 124 }; 125 126 struct mmc_host { 127 int f_min; 128 int f_max; 129 uint32_t host_ocr; 130 uint32_t ocr; 131 uint32_t caps; 132 #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can do 4-bit data transfers */ 133 #define MMC_CAP_8_BIT_DATA (1 << 1) /* Can do 8-bit data transfers */ 134 #define MMC_CAP_HSPEED (1 << 2) /* Can do High Speed transfers */ 135 enum mmc_card_mode mode; 136 struct mmc_ios ios; /* Current state of the host */ 137 }; 138 139 extern driver_t mmc_driver; 140 extern devclass_t mmc_devclass; 141 142 #define MMC_VERSION 1 143 144 #define MMC_DECLARE_BRIDGE(name) \ 145 DRIVER_MODULE(mmc, name, mmc_driver, mmc_devclass, NULL, NULL); \ 146 MODULE_DEPEND(name, mmc, MMC_VERSION, MMC_VERSION, MMC_VERSION); 147 148 #endif /* DEV_MMC_BRIDGE_H */ 149