1 /*- 2 * Copyright (c) 1999 Michael Smith 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 /* 30 * Debugging levels: 31 * 0 - quiet, only emit warnings 32 * 1 - noisy, emit major function points and things done 33 * 2 - extremely noisy, emit trace items in loops, etc. 34 */ 35 #ifdef MLX_DEBUG 36 #define debug(level, fmt, args...) do { if (level <= MLX_DEBUG) printf("%s: " fmt "\n", __FUNCTION__ , ##args); } while(0) 37 #define debug_called(level) do { if (level <= MLX_DEBUG) printf(__FUNCTION__ ": called\n"); } while(0) 38 #else 39 #define debug(level, fmt, args...) 40 #define debug_called(level) 41 #endif 42 43 44 /* 45 * We could actually use all 17/33 segments, but using only 16/32 means that 46 * each scatter/gather map is 128/256 bytes in size, and thus we don't have to worry about 47 * maps crossing page boundaries. 48 */ 49 #define MLX_NSEG_OLD 16 /* max scatter/gather segments we use 3.x and earlier */ 50 #define MLX_NSEG_NEW 32 /* max scatter/gather segments we use 4.x and later */ 51 #define MLX_NSLOTS 256 /* max number of command slots */ 52 53 #define MLX_MAXDRIVES 32 /* max number of system drives */ 54 55 /* 56 * Structure describing a System Drive as attached to the controller. 57 */ 58 struct mlx_sysdrive 59 { 60 /* from MLX_CMD_ENQSYSDRIVE */ 61 u_int32_t ms_size; 62 int ms_state; 63 int ms_raidlevel; 64 65 /* synthetic geometry */ 66 int ms_cylinders; 67 int ms_heads; 68 int ms_sectors; 69 70 /* handle for attached driver */ 71 device_t ms_disk; 72 }; 73 74 /* 75 * Per-command control structure. 76 */ 77 struct mlx_command 78 { 79 TAILQ_ENTRY(mlx_command) mc_link; /* list linkage */ 80 81 struct mlx_softc *mc_sc; /* controller that owns us */ 82 u_int8_t mc_slot; /* command slot we occupy */ 83 u_int16_t mc_status; /* command completion status */ 84 time_t mc_timeout; /* when this command expires */ 85 u_int8_t mc_mailbox[16]; /* command mailbox */ 86 u_int32_t mc_sgphys; /* physical address of s/g array in controller space */ 87 int mc_nsgent; /* number of entries in s/g map */ 88 int mc_flags; 89 #define MLX_CMD_DATAIN (1<<0) 90 #define MLX_CMD_DATAOUT (1<<1) 91 #define MLX_CMD_PRIORITY (1<<2) /* high-priority command */ 92 93 void *mc_data; /* data buffer */ 94 size_t mc_length; 95 bus_dmamap_t mc_dmamap; /* DMA map for data */ 96 u_int32_t mc_dataphys; /* data buffer base address controller space */ 97 98 void (* mc_complete)(struct mlx_command *mc); /* completion handler */ 99 void *mc_private; /* submitter-private data or wait channel */ 100 }; 101 102 /* 103 * Per-controller structure. 104 */ 105 struct mlx_softc 106 { 107 /* bus connections */ 108 device_t mlx_dev; 109 dev_t mlx_dev_t; 110 struct resource *mlx_mem; /* mailbox interface window */ 111 bus_space_handle_t mlx_bhandle; /* bus space handle */ 112 bus_space_tag_t mlx_btag; /* bus space tag */ 113 bus_dma_tag_t mlx_parent_dmat;/* parent DMA tag */ 114 bus_dma_tag_t mlx_buffer_dmat;/* data buffer DMA tag */ 115 struct resource *mlx_irq; /* interrupt */ 116 void *mlx_intr; /* interrupt handle */ 117 118 /* scatter/gather lists and their controller-visible mappings */ 119 struct mlx_sgentry *mlx_sgtable; /* s/g lists */ 120 u_int32_t mlx_sgbusaddr; /* s/g table base address in bus space */ 121 bus_dma_tag_t mlx_sg_dmat; /* s/g buffer DMA tag */ 122 bus_dmamap_t mlx_sg_dmamap; /* map for s/g buffers */ 123 int mlx_sg_nseg; /* max number of s/g entries */ 124 125 /* controller limits and features */ 126 struct mlx_enquiry2 *mlx_enq2; 127 int mlx_maxiop; /* hard maximum number of commands */ 128 int mlx_feature; /* controller features/quirks */ 129 #define MLX_FEAT_PAUSEWORKS (1<<0) /* channel pause works as expected */ 130 131 /* controller queues and arrays */ 132 TAILQ_HEAD(, mlx_command) mlx_freecmds; /* command structures available for reuse */ 133 TAILQ_HEAD(, mlx_command) mlx_work; /* active commands */ 134 struct mlx_command *mlx_busycmd[MLX_NSLOTS]; /* busy commands */ 135 int mlx_busycmds; /* count of busy commands */ 136 struct mlx_sysdrive mlx_sysdrive[MLX_MAXDRIVES]; /* system drives */ 137 struct buf_queue_head mlx_bufq; /* outstanding I/O operations */ 138 int mlx_waitbufs; /* number of bufs awaiting commands */ 139 140 /* controller status */ 141 int mlx_geom; 142 #define MLX_GEOM_128_32 0 /* geoemetry translation modes */ 143 #define MLX_GEOM_256_63 1 144 int mlx_state; 145 #define MLX_STATE_INTEN (1<<0) /* interrupts have been enabled */ 146 #define MLX_STATE_SHUTDOWN (1<<1) /* controller is shut down */ 147 #define MLX_STATE_OPEN (1<<2) /* control device is open */ 148 #define MLX_STATE_SUSPEND (1<<3) /* controller is suspended */ 149 struct callout_handle mlx_timeout; /* periodic status monitor */ 150 time_t mlx_lastpoll; /* last time_second we polled for status */ 151 int mlx_lastevent; /* sequence number of the last event we recorded */ 152 int mlx_currevent; /* sequence number last time we looked */ 153 int mlx_rebuild; /* if >= 0, drive is being rebuilt */ 154 u_int32_t mlx_rebuildstat;/* blocks left to rebuild if active */ 155 int mlx_check; /* if >= 0, drive is being checked */ 156 struct mlx_pause mlx_pause; /* pending pause operation details */ 157 158 int mlx_locks; /* reentrancy avoidance */ 159 int mlx_flags; 160 #define MLX_SPINUP_REPORTED (1<<0) /* "spinning up drives" message displayed */ 161 162 /* interface-specific accessor functions */ 163 int mlx_iftype; /* interface protocol */ 164 #define MLX_IFTYPE_2 2 165 #define MLX_IFTYPE_3 3 166 #define MLX_IFTYPE_4 4 167 #define MLX_IFTYPE_5 5 168 int (* mlx_tryqueue)(struct mlx_softc *sc, struct mlx_command *mc); 169 int (* mlx_findcomplete)(struct mlx_softc *sc, u_int8_t *slot, u_int16_t *status); 170 void (* mlx_intaction)(struct mlx_softc *sc, int action); 171 int (* mlx_fw_handshake)(struct mlx_softc *sc, int *error, int *param1, int *param2); 172 #define MLX_INTACTION_DISABLE 0 173 #define MLX_INTACTION_ENABLE 1 174 }; 175 176 /* 177 * Simple (stupid) locks. 178 * 179 * Note that these are designed to avoid reentrancy, not concurrency, and will 180 * need to be replaced with something better. 181 */ 182 #define MLX_LOCK_COMPLETING (1<<0) 183 #define MLX_LOCK_STARTING (1<<1) 184 185 static __inline int 186 mlx_lock_tas(struct mlx_softc *sc, int lock) 187 { 188 if ((sc)->mlx_locks & (lock)) 189 return(1); 190 atomic_set_int(&sc->mlx_locks, lock); 191 return(0); 192 } 193 194 static __inline void 195 mlx_lock_clr(struct mlx_softc *sc, int lock) 196 { 197 atomic_clear_int(&sc->mlx_locks, lock); 198 } 199 200 /* 201 * Interface between bus connections and driver core. 202 */ 203 extern void mlx_free(struct mlx_softc *sc); 204 extern int mlx_attach(struct mlx_softc *sc); 205 extern void mlx_startup(struct mlx_softc *sc); 206 extern void mlx_intr(void *data); 207 extern int mlx_detach(device_t dev); 208 extern int mlx_shutdown(device_t dev); 209 extern int mlx_suspend(device_t dev); 210 extern int mlx_resume(device_t dev); 211 extern d_open_t mlx_open; 212 extern d_close_t mlx_close; 213 extern d_ioctl_t mlx_ioctl; 214 215 extern devclass_t mlx_devclass; 216 217 /* 218 * Mylex System Disk driver 219 */ 220 struct mlxd_softc 221 { 222 device_t mlxd_dev; 223 struct mlx_softc *mlxd_controller; 224 struct mlx_sysdrive *mlxd_drive; 225 struct disk mlxd_disk; 226 struct devstat mlxd_stats; 227 struct disklabel mlxd_label; 228 int mlxd_unit; 229 int mlxd_flags; 230 #define MLXD_OPEN (1<<0) /* drive is open (can't shut down) */ 231 }; 232 233 /* 234 * Interface between driver core and disk driver (should be using a bus?) 235 */ 236 extern int mlx_submit_buf(struct mlx_softc *sc, struct buf *bp); 237 extern int mlx_submit_ioctl(struct mlx_softc *sc, struct mlx_sysdrive *drive, u_long cmd, 238 caddr_t addr, int32_t flag, struct proc *p); 239 extern void mlxd_intr(void *data); 240 241 242