xref: /freebsd/sys/dev/mii/nsphyter.c (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1 /*	$NetBSD: nsphyter.c,v 1.28 2008/01/20 07:58:19 msaitoh Exp $	*/
2 
3 /*-
4  * SPDX-License-Identifier: BSD-2-Clause
5  *
6  * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
7  * All rights reserved.
8  *
9  * This code is derived from software contributed to The NetBSD Foundation
10  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
11  * NASA Ames Research Center.
12  *
13  * Redistribution and use in source and binary forms, with or without
14  * modification, are permitted provided that the following conditions
15  * are met:
16  * 1. Redistributions of source code must retain the above copyright
17  *    notice, this list of conditions and the following disclaimer.
18  * 2. Redistributions in binary form must reproduce the above copyright
19  *    notice, this list of conditions and the following disclaimer in the
20  *    documentation and/or other materials provided with the distribution.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
23  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
24  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
25  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32  * POSSIBILITY OF SUCH DAMAGE.
33  */
34 
35 /*-
36  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  * 1. Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  * 2. Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in the
45  *    documentation and/or other materials provided with the distribution.
46  *
47  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
48  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
49  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
50  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
51  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
52  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
53  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
54  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
55  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
56  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
57  */
58 
59 #include <sys/cdefs.h>
60 /*
61  * Driver for the National Semiconductor's DP83843, DP83847 and DP83849
62  * `PHYTER' Ethernet 10/100 PHYs
63  * Data Sheets are available from http://www.national.com
64  *
65  * We also support the DP83815 `MacPHYTER' internal PHY since, for our
66  * purposes, they are compatible.
67  */
68 
69 #include <sys/param.h>
70 #include <sys/systm.h>
71 #include <sys/bus.h>
72 #include <sys/errno.h>
73 #include <sys/kernel.h>
74 #include <sys/module.h>
75 #include <sys/socket.h>
76 
77 #include <net/if.h>
78 #include <net/if_media.h>
79 
80 #include <dev/mii/mii.h>
81 #include <dev/mii/miivar.h>
82 #include "miidevs.h"
83 
84 #include <dev/mii/nsphyterreg.h>
85 
86 #include "miibus_if.h"
87 
88 static device_probe_t	nsphyter_probe;
89 static device_attach_t	nsphyter_attach;
90 
91 static device_method_t nsphyter_methods[] = {
92 	/* device interface */
93 	DEVMETHOD(device_probe,		nsphyter_probe),
94 	DEVMETHOD(device_attach,	nsphyter_attach),
95 	DEVMETHOD(device_detach,	mii_phy_detach),
96 	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
97 	DEVMETHOD_END
98 };
99 
100 static driver_t nsphyter_driver = {
101 	"nsphyter",
102 	nsphyter_methods,
103 	sizeof(struct mii_softc)
104 };
105 
106 DRIVER_MODULE(nsphyter, miibus, nsphyter_driver, 0, 0);
107 
108 static int	nsphyter_service(struct mii_softc *, struct mii_data *, int);
109 static void	nsphyter_status(struct mii_softc *);
110 static void	nsphyter_reset(struct mii_softc *);
111 
112 static const struct mii_phydesc nsphyters[] = {
113 	MII_PHY_DESC(xxNATSEMI, DP83815),
114 	MII_PHY_DESC(xxNATSEMI, DP83843),
115 	MII_PHY_DESC(xxNATSEMI, DP83847),
116 	MII_PHY_DESC(xxNATSEMI, DP83849),
117 	MII_PHY_END
118 };
119 
120 static const struct mii_phy_funcs nsphyter_funcs = {
121 	nsphyter_service,
122 	nsphyter_status,
123 	nsphyter_reset
124 };
125 
126 static int
127 nsphyter_probe(device_t dev)
128 {
129 
130 	return (mii_phy_dev_probe(dev, nsphyters, BUS_PROBE_DEFAULT));
131 }
132 
133 static int
134 nsphyter_attach(device_t dev)
135 {
136 
137 	mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &nsphyter_funcs, 1);
138 	return (0);
139 }
140 
141 static int
142 nsphyter_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
143 {
144 
145 	switch (cmd) {
146 	case MII_POLLSTAT:
147 		break;
148 
149 	case MII_MEDIACHG:
150 		mii_phy_setmedia(sc);
151 		break;
152 
153 	case MII_TICK:
154 		if (mii_phy_tick(sc) == EJUSTRETURN)
155 			return (0);
156 		break;
157 	}
158 
159 	/* Update the media status. */
160 	PHY_STATUS(sc);
161 
162 	/* Callback if something changed. */
163 	mii_phy_update(sc, cmd);
164 	return (0);
165 }
166 
167 static void
168 nsphyter_status(struct mii_softc *sc)
169 {
170 	struct mii_data *mii = sc->mii_pdata;
171 	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
172 	int bmsr, bmcr, physts;
173 
174 	mii->mii_media_status = IFM_AVALID;
175 	mii->mii_media_active = IFM_ETHER;
176 
177 	bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
178 	physts = PHY_READ(sc, MII_NSPHYTER_PHYSTS);
179 
180 	if ((physts & PHYSTS_LINK) != 0)
181 		mii->mii_media_status |= IFM_ACTIVE;
182 
183 	bmcr = PHY_READ(sc, MII_BMCR);
184 	if ((bmcr & BMCR_ISO) != 0) {
185 		mii->mii_media_active |= IFM_NONE;
186 		mii->mii_media_status = 0;
187 		return;
188 	}
189 
190 	if ((bmcr & BMCR_LOOP) != 0)
191 		mii->mii_media_active |= IFM_LOOP;
192 
193 	if ((bmcr & BMCR_AUTOEN) != 0) {
194 		/*
195 		 * The media status bits are only valid if autonegotiation
196 		 * has completed (or it's disabled).
197 		 */
198 		if ((bmsr & BMSR_ACOMP) == 0) {
199 			/* Erg, still trying, I guess... */
200 			mii->mii_media_active |= IFM_NONE;
201 			return;
202 		}
203 
204 		if ((physts & PHYSTS_SPEED10) != 0)
205 			mii->mii_media_active |= IFM_10_T;
206 		else
207 			mii->mii_media_active |= IFM_100_TX;
208 		if ((physts & PHYSTS_DUPLEX) != 0)
209 			mii->mii_media_active |=
210 			    IFM_FDX | mii_phy_flowstatus(sc);
211 		else
212 			mii->mii_media_active |= IFM_HDX;
213 	} else
214 		mii->mii_media_active = ife->ifm_media;
215 }
216 
217 static void
218 nsphyter_reset(struct mii_softc *sc)
219 {
220 	struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
221 	int reg, i;
222 
223 	if ((sc->mii_flags & MIIF_NOISOLATE) != 0)
224 		reg = BMCR_RESET;
225 	else
226 		reg = BMCR_RESET | BMCR_ISO;
227 	PHY_WRITE(sc, MII_BMCR, reg);
228 
229 	/*
230 	 * It is best to allow a little time for the reset to settle
231 	 * in before we start polling the BMCR again.  Notably, the
232 	 * DP8384{3,7} manuals state that there should be a 500us delay
233 	 * between asserting software reset and attempting MII serial
234 	 * operations.  Be conservative.  Also, a DP83815 can get into
235 	 * a bad state on cable removal and reinsertion if we do not
236 	 * delay here.
237 	 */
238 	DELAY(1000);
239 
240 	/*
241 	 * Wait another 2s for it to complete.
242 	 * This is only a little overkill as under normal circumstances
243 	 * the PHY can take up to 1s to complete reset.
244 	 * This is also a bit odd because after a reset, the BMCR will
245 	 * clear the reset bit and simply reports 0 even though the reset
246 	 * is not yet complete.
247 	 */
248 	for (i = 0; i < 1000; i++) {
249 		reg = PHY_READ(sc, MII_BMCR);
250 		if (reg != 0 && (reg & BMCR_RESET) == 0)
251 			break;
252 		DELAY(2000);
253 	}
254 
255 	if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
256 		if ((ife == NULL && sc->mii_inst != 0) ||
257 		    (ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
258 			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
259 	}
260 }
261