xref: /freebsd/sys/dev/mii/nsgphy.c (revision 4f52dfbb8d6c4d446500c5b097e3806ec219fbd4)
1 /*-
2  * SPDX-License-Identifier: BSD-4-Clause
3  *
4  * Copyright (c) 2001 Wind River Systems
5  * Copyright (c) 2001
6  *	Bill Paul <wpaul@bsdi.com>.  All rights reserved.
7  * Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
8  * All rights reserved.
9  *
10  * This code is derived from software contributed to The NetBSD Foundation
11  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
12  * NASA Ames Research Center.
13  *
14  * Redistribution and use in source and binary forms, with or without
15  * modification, are permitted provided that the following conditions
16  * are met:
17  * 1. Redistributions of source code must retain the above copyright
18  *    notice, this list of conditions and the following disclaimer.
19  * 2. Redistributions in binary form must reproduce the above copyright
20  *    notice, this list of conditions and the following disclaimer in the
21  *    documentation and/or other materials provided with the distribution.
22  * 3. All advertising materials mentioning features or use of this software
23  *    must display the following acknowledgement:
24  *	This product includes software developed by Bill Paul.
25  * 4. Neither the name of the author nor the names of any co-contributors
26  *    may be used to endorse or promote products derived from this software
27  *    without specific prior written permission.
28  *
29  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
30  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
31  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
32  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
33  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
34  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
37  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39  * THE POSSIBILITY OF SUCH DAMAGE.
40  */
41 
42 #include <sys/cdefs.h>
43 __FBSDID("$FreeBSD$");
44 
45 /*
46  * Driver for the National Semiconductor DP83861, DP83865 and DP83891
47  * 10/100/1000 PHYs.
48  * Datasheet available at: http://www.national.com/ds/DP/DP83861.pdf
49  * and at: http://www.national.com/ds/DP/DP83865.pdf
50  *
51  * The DP83891 is the older NS GigE PHY which isn't being sold
52  * anymore.  The DP83861 is its replacement, which is an 'enhanced'
53  * firmware driven component.  The major difference between the
54  * two is that the DP83891 can't generate interrupts, while the
55  * 83861 can (probably it wasn't originally designed to do this, but
56  * it can now thanks to firmware updates).  The DP83861 also allows
57  * access to its internal RAM via indirect register access.  The
58  * DP83865 is an ultra low power version of the DP83861 and DP83891.
59  */
60 
61 #include <sys/param.h>
62 #include <sys/systm.h>
63 #include <sys/kernel.h>
64 #include <sys/module.h>
65 #include <sys/socket.h>
66 #include <sys/bus.h>
67 
68 #include <net/if.h>
69 #include <net/if_media.h>
70 
71 #include <dev/mii/mii.h>
72 #include <dev/mii/miivar.h>
73 #include "miidevs.h"
74 
75 #include <dev/mii/nsgphyreg.h>
76 
77 #include "miibus_if.h"
78 
79 static int nsgphy_probe(device_t);
80 static int nsgphy_attach(device_t);
81 
82 static device_method_t nsgphy_methods[] = {
83 	/* device interface */
84 	DEVMETHOD(device_probe,		nsgphy_probe),
85 	DEVMETHOD(device_attach,	nsgphy_attach),
86 	DEVMETHOD(device_detach,	mii_phy_detach),
87 	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
88 	DEVMETHOD_END
89 };
90 
91 static devclass_t nsgphy_devclass;
92 
93 static driver_t nsgphy_driver = {
94 	"nsgphy",
95 	nsgphy_methods,
96 	sizeof(struct mii_softc)
97 };
98 
99 DRIVER_MODULE(nsgphy, miibus, nsgphy_driver, nsgphy_devclass, 0, 0);
100 
101 static int	nsgphy_service(struct mii_softc *, struct mii_data *,int);
102 static void	nsgphy_status(struct mii_softc *);
103 
104 static const struct mii_phydesc nsgphys[] = {
105 	MII_PHY_DESC(xxNATSEMI, DP83861),
106 	MII_PHY_DESC(xxNATSEMI, DP83865),
107 	MII_PHY_DESC(xxNATSEMI, DP83891),
108 	MII_PHY_END
109 };
110 
111 static const struct mii_phy_funcs nsgphy_funcs = {
112 	nsgphy_service,
113 	nsgphy_status,
114 	mii_phy_reset
115 };
116 
117 static int
118 nsgphy_probe(device_t dev)
119 {
120 
121 	return (mii_phy_dev_probe(dev, nsgphys, BUS_PROBE_DEFAULT));
122 }
123 
124 static int
125 nsgphy_attach(device_t dev)
126 {
127 	struct mii_softc *sc;
128 
129 	sc = device_get_softc(dev);
130 
131 	mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &nsgphy_funcs, 0);
132 
133 	PHY_RESET(sc);
134 
135 	/*
136 	 * NB: the PHY has the 10BASE-T BMSR bits hard-wired to 0,
137 	 * even though it supports 10BASE-T.
138 	 */
139 	sc->mii_capabilities = (PHY_READ(sc, MII_BMSR) |
140 	    BMSR_10TFDX | BMSR_10THDX) & sc->mii_capmask;
141 	/*
142 	 * Note that as documented manual 1000BASE-T modes of DP83865 only
143 	 * work together with other National Semiconductor PHYs.
144 	 */
145 	if (sc->mii_capabilities & BMSR_EXTSTAT)
146 		sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
147 
148 	mii_phy_add_media(sc);
149 	printf("\n");
150 
151 	MIIBUS_MEDIAINIT(sc->mii_dev);
152 	return (0);
153 }
154 
155 static int
156 nsgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
157 {
158 
159 	switch (cmd) {
160 	case MII_POLLSTAT:
161 		break;
162 
163 	case MII_MEDIACHG:
164 		mii_phy_setmedia(sc);
165 		break;
166 
167 	case MII_TICK:
168 		if (mii_phy_tick(sc) == EJUSTRETURN)
169 			return (0);
170 		break;
171 	}
172 
173 	/* Update the media status. */
174 	PHY_STATUS(sc);
175 
176 	/* Callback if something changed. */
177 	mii_phy_update(sc, cmd);
178 	return (0);
179 }
180 
181 static void
182 nsgphy_status(struct mii_softc *sc)
183 {
184 	struct mii_data *mii = sc->mii_pdata;
185 	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
186 	int bmsr, bmcr, physup, gtsr;
187 
188 	mii->mii_media_status = IFM_AVALID;
189 	mii->mii_media_active = IFM_ETHER;
190 
191 	bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
192 
193 	physup = PHY_READ(sc, NSGPHY_MII_PHYSUP);
194 
195 	if (physup & PHY_SUP_LINK)
196 		mii->mii_media_status |= IFM_ACTIVE;
197 
198 	bmcr = PHY_READ(sc, MII_BMCR);
199 	if (bmcr & BMCR_ISO) {
200 		mii->mii_media_active |= IFM_NONE;
201 		mii->mii_media_status = 0;
202 		return;
203 	}
204 
205 	if (bmcr & BMCR_LOOP)
206 		mii->mii_media_active |= IFM_LOOP;
207 
208 	if (bmcr & BMCR_AUTOEN) {
209 		/*
210 		 * The media status bits are only valid if autonegotiation
211 		 * has completed (or it's disabled).
212 		 */
213 		if ((bmsr & BMSR_ACOMP) == 0) {
214 			/* Erg, still trying, I guess... */
215 			mii->mii_media_active |= IFM_NONE;
216 			return;
217 		}
218 
219 		switch (physup & (PHY_SUP_SPEED1 | PHY_SUP_SPEED0)) {
220 		case PHY_SUP_SPEED1:
221 			mii->mii_media_active |= IFM_1000_T;
222 			gtsr = PHY_READ(sc, MII_100T2SR);
223 			if (gtsr & GTSR_MS_RES)
224 				mii->mii_media_active |= IFM_ETH_MASTER;
225 			break;
226 
227 		case PHY_SUP_SPEED0:
228 			mii->mii_media_active |= IFM_100_TX;
229 			break;
230 
231 		case 0:
232 			mii->mii_media_active |= IFM_10_T;
233 			break;
234 
235 		default:
236 			mii->mii_media_active |= IFM_NONE;
237 			mii->mii_media_status = 0;
238 			return;
239 		}
240 
241 		if (physup & PHY_SUP_DUPLEX)
242 			mii->mii_media_active |=
243 			    IFM_FDX | mii_phy_flowstatus(sc);
244 		else
245 			mii->mii_media_active |= IFM_HDX;
246 	} else
247 		mii->mii_media_active = ife->ifm_media;
248 }
249