1 /*- 2 * Copyright (c) 2014,2019 Ruslan Bukin <br@bsdpad.com> 3 * All rights reserved. 4 * 5 * This software was developed by SRI International and the University of 6 * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237) 7 * ("CTSRD"), as part of the DARPA CRASH research programme. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31 #include <sys/cdefs.h> 32 /* 33 * Micrel KSZ8081/KSZ9021/KSZ9031 Gigabit Ethernet Transceiver 34 */ 35 36 #include <sys/param.h> 37 #include <sys/systm.h> 38 #include <sys/kernel.h> 39 #include <sys/socket.h> 40 #include <sys/errno.h> 41 #include <sys/module.h> 42 #include <sys/bus.h> 43 #include <sys/malloc.h> 44 45 #include <machine/bus.h> 46 47 #include <net/if.h> 48 #include <net/if_media.h> 49 50 #include <dev/mii/mii.h> 51 #include <dev/mii/miivar.h> 52 #include "miidevs.h" 53 54 #include "miibus_if.h" 55 56 #include <dev/fdt/fdt_common.h> 57 #include <dev/ofw/openfirm.h> 58 #include <dev/ofw/ofw_bus.h> 59 #include <dev/ofw/ofw_bus_subr.h> 60 #include <dev/mii/mii_fdt.h> 61 62 #define MII_KSZPHY_EXTREG 0x0b 63 #define KSZPHY_EXTREG_WRITE (1 << 15) 64 #define MII_KSZPHY_EXTREG_WRITE 0x0c 65 #define MII_KSZPHY_EXTREG_READ 0x0d 66 #define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104 67 #define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105 68 #define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106 69 /* KSZ9031 */ 70 #define MII_KSZ9031_MMD_ACCESS_CTRL 0x0d 71 #define MII_KSZ9031_MMD_ACCESS_DATA 0x0e 72 #define MII_KSZ9031_MMD_DATA_NOINC (1 << 14) 73 #define MII_KSZ9031_CONTROL_PAD_SKEW 0x4 74 #define MII_KSZ9031_RX_DATA_PAD_SKEW 0x5 75 #define MII_KSZ9031_TX_DATA_PAD_SKEW 0x6 76 #define MII_KSZ9031_CLOCK_PAD_SKEW 0x8 77 78 #define MII_KSZ8081_PHYCTL2 0x1f 79 80 #define PS_TO_REG(p) ((p) / 200) 81 82 static int micphy_probe(device_t); 83 static int micphy_attach(device_t); 84 static void micphy_reset(struct mii_softc *); 85 static int micphy_service(struct mii_softc *, struct mii_data *, int); 86 87 static device_method_t micphy_methods[] = { 88 /* device interface */ 89 DEVMETHOD(device_probe, micphy_probe), 90 DEVMETHOD(device_attach, micphy_attach), 91 DEVMETHOD(device_detach, mii_phy_detach), 92 DEVMETHOD(device_shutdown, bus_generic_shutdown), 93 DEVMETHOD_END 94 }; 95 96 static driver_t micphy_driver = { 97 "micphy", 98 micphy_methods, 99 sizeof(struct mii_softc) 100 }; 101 102 DRIVER_MODULE(micphy, miibus, micphy_driver, 0, 0); 103 104 static const struct mii_phydesc micphys[] = { 105 MII_PHY_DESC(MICREL, KSZ8081), 106 MII_PHY_DESC(MICREL, KSZ9021), 107 MII_PHY_DESC(MICREL, KSZ9031), 108 MII_PHY_END 109 }; 110 111 static const struct mii_phy_funcs micphy_funcs = { 112 micphy_service, 113 ukphy_status, 114 micphy_reset 115 }; 116 117 static uint32_t 118 ksz9031_read(struct mii_softc *sc, uint32_t devaddr, uint32_t reg) 119 { 120 /* Set up device address and register. */ 121 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, devaddr); 122 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, reg); 123 124 /* Select register data for MMD and read the value. */ 125 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, 126 MII_KSZ9031_MMD_DATA_NOINC | devaddr); 127 128 return (PHY_READ(sc, MII_KSZ9031_MMD_ACCESS_DATA)); 129 } 130 131 static void 132 ksz9031_write(struct mii_softc *sc, uint32_t devaddr, uint32_t reg, 133 uint32_t val) 134 { 135 136 /* Set up device address and register. */ 137 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, devaddr); 138 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, reg); 139 140 /* Select register data for MMD and write the value. */ 141 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_CTRL, 142 MII_KSZ9031_MMD_DATA_NOINC | devaddr); 143 PHY_WRITE(sc, MII_KSZ9031_MMD_ACCESS_DATA, val); 144 } 145 146 static uint32_t 147 ksz9021_read(struct mii_softc *sc, uint32_t reg) 148 { 149 150 PHY_WRITE(sc, MII_KSZPHY_EXTREG, reg); 151 152 return (PHY_READ(sc, MII_KSZPHY_EXTREG_READ)); 153 } 154 155 static void 156 ksz9021_write(struct mii_softc *sc, uint32_t reg, uint32_t val) 157 { 158 159 PHY_WRITE(sc, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | reg); 160 PHY_WRITE(sc, MII_KSZPHY_EXTREG_WRITE, val); 161 } 162 163 static void 164 ksz90x1_load_values(struct mii_softc *sc, phandle_t node, 165 uint32_t dev, uint32_t reg, char *field1, uint32_t f1mask, int f1off, 166 char *field2, uint32_t f2mask, int f2off, char *field3, uint32_t f3mask, 167 int f3off, char *field4, uint32_t f4mask, int f4off) 168 { 169 pcell_t dts_value[1]; 170 int len; 171 int val; 172 173 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031) 174 val = ksz9031_read(sc, dev, reg); 175 else 176 val = ksz9021_read(sc, reg); 177 178 if ((len = OF_getproplen(node, field1)) > 0) { 179 OF_getencprop(node, field1, dts_value, len); 180 val &= ~(f1mask << f1off); 181 val |= (PS_TO_REG(dts_value[0]) & f1mask) << f1off; 182 } 183 184 if (field2 != NULL && (len = OF_getproplen(node, field2)) > 0) { 185 OF_getencprop(node, field2, dts_value, len); 186 val &= ~(f2mask << f2off); 187 val |= (PS_TO_REG(dts_value[0]) & f2mask) << f2off; 188 } 189 190 if (field3 != NULL && (len = OF_getproplen(node, field3)) > 0) { 191 OF_getencprop(node, field3, dts_value, len); 192 val &= ~(f3mask << f3off); 193 val |= (PS_TO_REG(dts_value[0]) & f3mask) << f3off; 194 } 195 196 if (field4 != NULL && (len = OF_getproplen(node, field4)) > 0) { 197 OF_getencprop(node, field4, dts_value, len); 198 val &= ~(f4mask << f4off); 199 val |= (PS_TO_REG(dts_value[0]) & f4mask) << f4off; 200 } 201 202 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031) 203 ksz9031_write(sc, dev, reg, val); 204 else 205 ksz9021_write(sc, reg, val); 206 } 207 208 static void 209 ksz9031_load_values(struct mii_softc *sc, phandle_t node) 210 { 211 212 ksz90x1_load_values(sc, node, 2, MII_KSZ9031_CONTROL_PAD_SKEW, 213 "txen-skew-ps", 0xf, 0, "rxdv-skew-ps", 0xf, 4, 214 NULL, 0, 0, NULL, 0, 0); 215 ksz90x1_load_values(sc, node, 2, MII_KSZ9031_RX_DATA_PAD_SKEW, 216 "rxd0-skew-ps", 0xf, 0, "rxd1-skew-ps", 0xf, 4, 217 "rxd2-skew-ps", 0xf, 8, "rxd3-skew-ps", 0xf, 12); 218 ksz90x1_load_values(sc, node, 2, MII_KSZ9031_TX_DATA_PAD_SKEW, 219 "txd0-skew-ps", 0xf, 0, "txd1-skew-ps", 0xf, 4, 220 "txd2-skew-ps", 0xf, 8, "txd3-skew-ps", 0xf, 12); 221 ksz90x1_load_values(sc, node, 2, MII_KSZ9031_CLOCK_PAD_SKEW, 222 "rxc-skew-ps", 0x1f, 0, "txc-skew-ps", 0x1f, 5, 223 NULL, 0, 0, NULL, 0, 0); 224 } 225 226 static void 227 ksz9021_load_values(struct mii_softc *sc, phandle_t node) 228 { 229 230 ksz90x1_load_values(sc, node, 0, MII_KSZPHY_CLK_CONTROL_PAD_SKEW, 231 "txen-skew-ps", 0xf, 0, "txc-skew-ps", 0xf, 4, 232 "rxdv-skew-ps", 0xf, 8, "rxc-skew-ps", 0xf, 12); 233 ksz90x1_load_values(sc, node, 0, MII_KSZPHY_RX_DATA_PAD_SKEW, 234 "rxd0-skew-ps", 0xf, 0, "rxd1-skew-ps", 0xf, 4, 235 "rxd2-skew-ps", 0xf, 8, "rxd3-skew-ps", 0xf, 12); 236 ksz90x1_load_values(sc, node, 0, MII_KSZPHY_TX_DATA_PAD_SKEW, 237 "txd0-skew-ps", 0xf, 0, "txd1-skew-ps", 0xf, 4, 238 "txd2-skew-ps", 0xf, 8, "txd3-skew-ps", 0xf, 12); 239 } 240 241 static int 242 micphy_probe(device_t dev) 243 { 244 245 return (mii_phy_dev_probe(dev, micphys, BUS_PROBE_DEFAULT)); 246 } 247 248 static int 249 micphy_attach(device_t dev) 250 { 251 mii_fdt_phy_config_t *cfg; 252 struct mii_softc *sc; 253 phandle_t node; 254 device_t miibus; 255 device_t parent; 256 257 sc = device_get_softc(dev); 258 259 mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &micphy_funcs, 1); 260 mii_phy_setmedia(sc); 261 262 /* Nothing further to configure for 8081 model. */ 263 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ8081) 264 return (0); 265 266 miibus = device_get_parent(dev); 267 parent = device_get_parent(miibus); 268 269 if ((node = ofw_bus_get_node(parent)) == -1) 270 return (ENXIO); 271 272 cfg = mii_fdt_get_config(dev); 273 274 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ9031) 275 ksz9031_load_values(sc, cfg->phynode); 276 else 277 ksz9021_load_values(sc, cfg->phynode); 278 279 mii_fdt_free_config(cfg); 280 281 return (0); 282 } 283 284 static void 285 micphy_reset(struct mii_softc *sc) 286 { 287 int reg; 288 289 /* 290 * The 8081 has no "sticky bits" that survive a soft reset; several bits 291 * in the Phy Control Register 2 must be preserved across the reset. 292 * These bits are set up by the bootloader; they control how the phy 293 * interfaces to the board (such as clock frequency and LED behavior). 294 */ 295 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ8081) 296 reg = PHY_READ(sc, MII_KSZ8081_PHYCTL2); 297 mii_phy_reset(sc); 298 if (sc->mii_mpd_model == MII_MODEL_MICREL_KSZ8081) 299 PHY_WRITE(sc, MII_KSZ8081_PHYCTL2, reg); 300 } 301 302 static int 303 micphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 304 { 305 306 switch (cmd) { 307 case MII_POLLSTAT: 308 break; 309 310 case MII_MEDIACHG: 311 mii_phy_setmedia(sc); 312 break; 313 314 case MII_TICK: 315 if (mii_phy_tick(sc) == EJUSTRETURN) 316 return (0); 317 break; 318 } 319 320 /* Update the media status. */ 321 PHY_STATUS(sc); 322 323 /* Callback if something changed. */ 324 mii_phy_update(sc, cmd); 325 return (0); 326 } 327