xref: /freebsd/sys/dev/mii/lxtphyreg.h (revision 1e413cf93298b5b97441a21d9a50fdcd0ee9945e)
1 /*	OpenBSD: lxtphyreg.h,v 1.1 1998/11/11 19:34:47 jason Exp 	*/
2 /*	NetBSD: lxtphyreg.h,v 1.1 1998/10/24 00:33:17 thorpej Exp 	*/
3 /*	$FreeBSD$	*/
4 
5 /*-
6  * Copyright (c) 1998 The NetBSD Foundation, Inc.
7  * All rights reserved.
8  *
9  * This code is derived from software contributed to The NetBSD Foundation
10  * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
11  * NASA Ames Research Center.
12  *
13  * Redistribution and use in source and binary forms, with or without
14  * modification, are permitted provided that the following conditions
15  * are met:
16  * 1. Redistributions of source code must retain the above copyright
17  *    notice, this list of conditions and the following disclaimer.
18  * 2. Redistributions in binary form must reproduce the above copyright
19  *    notice, this list of conditions and the following disclaimer in the
20  *    documentation and/or other materials provided with the distribution.
21  * 3. All advertising materials mentioning features or use of this software
22  *    must display the following acknowledgement:
23  *	This product includes software developed by the NetBSD
24  *	Foundation, Inc. and its contributors.
25  * 4. Neither the name of The NetBSD Foundation nor the names of its
26  *    contributors may be used to endorse or promote products derived
27  *    from this software without specific prior written permission.
28  *
29  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
30  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
31  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
32  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
33  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
34  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
37  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
39  * POSSIBILITY OF SUCH DAMAGE.
40  */
41 
42 #ifndef _DEV_MII_LXTPHYREG_H_
43 #define	_DEV_MII_LXTPHYREG_H_
44 
45 /*
46  * LXT970 registers.
47  */
48 
49 #define	MII_LXTPHY_MIRROR	0x10	/* Mirror register */
50 	/* All bits user-defined */
51 
52 #define	MII_LXTPHY_IER		0x11	/* Interrupt Enable Register */
53 #define	IER_MIIDRVLVL		0x0008	/* Rediced MII driver levels */
54 #define	IER_LNK_CRITERIA	0x0004	/* Enhanced Link Loss Criteria */
55 #define	IER_INTEN		0x0002	/* Interrupt Enable */
56 #define	IER_TINT		0x0001	/* Force Interrupt */
57 
58 #define	MII_LXTPHY_ISR		0x12	/* Interrupt Status Register */
59 #define	ISR_MINT		0x8000	/* MII Interrupt Pending */
60 #define	ISR_XTALOK		0x4000	/* Clocks OK */
61 
62 #define	MII_LXTPHY_CONFIG	0x13	/* Configuration Register */
63 #define	CONFIG_TXMIT_TEST	0x4000	/* 100base-T Transmit Test */
64 #define	CONFIG_REPEATER		0x2000	/* Repeater Mode */
65 #define	CONFIG_MDIO_INT		0x1000	/* Enable intr signalling on MDIO */
66 #define	CONFIG_TPLOOP		0x0800	/* Disable 10base-T Loopback */
67 #define	CONFIG_SQE		0x0400	/* Enable SQE */
68 #define	CONFIG_DISJABBER	0x0200	/* Disable Jabber */
69 #define	CONFIG_DISLINKTEST	0x0100	/* Disable Link Test */
70 #define	CONFIG_LEDC1		0x0080	/* LEDC configuration */
71 #define	CONFIG_LEDC0		0x0040	/* ... */
72 					/* 0 0 LEDC indicates collision */
73 					/* 0 1 LEDC is off */
74 					/* 1 0 LEDC indicates activity */
75 					/* 1 1 LEDC is on */
76 #define	CONFIG_ADVTXCLK		0x0020	/* Advance TX clock */
77 #define	CONFIG_5BSYMBOL		0x0010	/* 5-bit Symbol mode */
78 #define	CONFIG_SCRAMBLER	0x0008	/* Bypass scrambler */
79 #define	CONFIG_100BASEFX	0x0004	/* 100base-FX */
80 #define	CONFIG_TXDISCON		0x0001	/* Disconnect TP transmitter */
81 
82 #define	MII_LXTPHY_CSR		0x14	/* Chip Status Register */
83 #define	CSR_LINK		0x2000	/* Link is up */
84 #define	CSR_DUPLEX		0x1000	/* Full-duplex */
85 #define	CSR_SPEED		0x0800	/* 100Mbps */
86 #define	CSR_ACOMP		0x0400	/* Autonegotiation complete */
87 #define	CSR_PAGERCVD		0x0200	/* Link page received */
88 #define	CSR_LOWVCC		0x0004	/* Low Voltage Fault */
89 
90 #endif /* _DEV_MII_LXTPHYREG_H_ */
91