xref: /freebsd/sys/dev/mfi/mfireg.h (revision ddbffe7f7040518ed5278c65d3bbde49beb30ea8)

/*-
 * Copyright (c) 2006 IronPort Systems
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*-
 * Copyright (c) 2007 LSI Corp.
 * Copyright (c) 2007 Rajesh Prabhakaran.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifndef _MFIREG_H
#define _MFIREG_H

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * MegaRAID SAS MFI firmware definitions
 *
 * Calling this driver 'MegaRAID SAS' is a bit misleading.  It's a completely
 * new firmware interface from the old AMI MegaRAID one, and there is no
 * reason why this interface should be limited to just SAS.  In any case, LSI
 * seems to also call this interface 'MFI', so that will be used here.
 */
#define MEGAMFI_FRAME_SIZE              64
/*
 * Start with the register set.  All registers are 32 bits wide.
 * The usual Intel IOP style setup.
 */
#define MFI_IMSG0	0x10	/* Inbound message 0 */
#define MFI_IMSG1	0x14	/* Inbound message 1 */
#define MFI_OMSG0	0x18	/* Outbound message 0 */
#define MFI_OMSG1	0x1c	/* Outbound message 1 */
#define MFI_IDB		0x20	/* Inbound doorbell */
#define MFI_ISTS	0x24	/* Inbound interrupt status */
#define MFI_IMSK	0x28	/* Inbound interrupt mask */
#define MFI_ODB		0x2c	/* Outbound doorbell */
#define MFI_OSTS	0x30	/* Outbound interrupt status */
#define MFI_OMSK	0x34	/* Outbound interrupt mask */
#define MFI_IQP		0x40	/* Inbound queue port */
#define MFI_OQP		0x44	/* Outbound queue port */

/*
*  ThunderBolt specific Register
*/

#define MFI_RPI		0x6c 		/* reply_post_host_index */
#define MFI_ILQP 	0xc0		/* inbound_low_queue_port */
#define MFI_IHQP 	0xc4		/* inbound_high_queue_port */

/*
 * 1078 specific related register
 */
#define MFI_ODR0	0x9c 		/* outbound doorbell register0 */
#define MFI_ODCR0	0xa0 		/* outbound doorbell clear register0  */
#define MFI_OSP0	0xb0 		/* outbound scratch pad0  */
#define MFI_1078_EIM	0x80000004 	/* 1078 enable intrrupt mask  */
#define MFI_RMI		0x2 		/* reply message interrupt  */
#define MFI_1078_RM	0x80000000 	/* reply 1078 message interrupt  */
#define MFI_ODC		0x4 		/* outbound doorbell change interrupt */

/* OCR registers */
#define MFI_WSR		0x004		/* write sequence register */
#define MFI_HDR		0x008		/* host diagnostic register */
#define MFI_RSR		0x3c3		/* Reset Status Register */

/*
 * GEN2 specific changes
 */
#define MFI_GEN2_EIM	0x00000005	/* GEN2 enable interrupt mask */
#define MFI_GEN2_RM	0x00000001	/* reply GEN2 message interrupt */

/*
 * skinny specific changes
 */
#define MFI_SKINNY_IDB	0x00	/* Inbound doorbell is at 0x00 for skinny */
#define MFI_IQPL	0x000000c0
#define MFI_IQPH	0x000000c4
#define MFI_SKINNY_RM	0x00000001	/* reply skinny message interrupt */

/* Bits for MFI_OSTS */
#define MFI_OSTS_INTR_VALID	0x00000002

/* OCR specific flags */
#define MFI_FIRMWARE_STATE_CHANGE	0x00000002
#define MFI_STATE_CHANGE_INTERRUPT	0x00000004  /* MFI state change interrrupt */

/*
 * Firmware state values.  Found in OMSG0 during initialization.
 */
#define MFI_FWSTATE_MASK		0xf0000000
#define MFI_FWSTATE_UNDEFINED		0x00000000
#define MFI_FWSTATE_BB_INIT		0x10000000
#define MFI_FWSTATE_FW_INIT		0x40000000
#define MFI_FWSTATE_WAIT_HANDSHAKE	0x60000000
#define MFI_FWSTATE_FW_INIT_2		0x70000000
#define MFI_FWSTATE_DEVICE_SCAN		0x80000000
#define MFI_FWSTATE_BOOT_MESSAGE_PENDING	0x90000000
#define MFI_FWSTATE_FLUSH_CACHE		0xa0000000
#define MFI_FWSTATE_READY		0xb0000000
#define MFI_FWSTATE_OPERATIONAL		0xc0000000
#define MFI_FWSTATE_FAULT		0xf0000000
#define MFI_FWSTATE_MAXSGL_MASK		0x00ff0000
#define MFI_FWSTATE_MAXCMD_MASK		0x0000ffff
#define MFI_FWSTATE_HOSTMEMREQD_MASK	0x08000000
#define MFI_FWSTATE_BOOT_MESSAGE_PENDING	0x90000000
#define MFI_RESET_REQUIRED		0x00000001

/* ThunderBolt Support */
#define MFI_FWSTATE_TB_MASK		0xf0000000
#define MFI_FWSTATE_TB_RESET		0x00000000
#define MFI_FWSTATE_TB_READY		0x10000000
#define MFI_FWSTATE_TB_OPERATIONAL	0x20000000
#define MFI_FWSTATE_TB_FAULT		0x40000000

/*
 * Control bits to drive the card to ready state.  These go into the IDB
 * register.
 */
#define MFI_FWINIT_ABORT	0x00000000 /* Abort all pending commands */
#define MFI_FWINIT_READY	0x00000002 /* Move from operational to ready */
#define MFI_FWINIT_MFIMODE	0x00000004 /* unknown */
#define MFI_FWINIT_CLEAR_HANDSHAKE 0x00000008 /* Respond to WAIT_HANDSHAKE */
#define MFI_FWINIT_HOTPLUG	0x00000010

/* ADP reset flags */
#define MFI_STOP_ADP		0x00000020
#define MFI_ADP_RESET		0x00000040
#define DIAG_WRITE_ENABLE	0x00000080
#define DIAG_RESET_ADAPTER	0x00000004

/* MFI Commands */
typedef enum {
	MFI_CMD_INIT =		0x00,
	MFI_CMD_LD_READ,
	MFI_CMD_LD_WRITE,
	MFI_CMD_LD_SCSI_IO,
	MFI_CMD_PD_SCSI_IO,
	MFI_CMD_DCMD,
	MFI_CMD_ABORT,
	MFI_CMD_SMP,
	MFI_CMD_STP
} mfi_cmd_t;

/* Direct commands */
typedef enum {
	MFI_DCMD_CTRL_GETINFO =		0x01010000,
	MFI_DCMD_CTRL_MFI_HOST_MEM_ALLOC =0x0100e100,
	MFI_DCMD_CTRL_MFC_DEFAULTS_GET =0x010e0201,
	MFI_DCMD_CTRL_MFC_DEFAULTS_SET =0x010e0202,
	MFI_DCMD_CTRL_FLUSHCACHE =	0x01101000,
	MFI_DCMD_CTRL_SHUTDOWN =	0x01050000,
	MFI_DCMD_CTRL_EVENT_GETINFO =	0x01040100,
	MFI_DCMD_CTRL_EVENT_GET =	0x01040300,
	MFI_DCMD_CTRL_EVENT_WAIT =	0x01040500,
	MFI_DCMD_PR_GET_STATUS =	0x01070100,
	MFI_DCMD_PR_GET_PROPERTIES =	0x01070200,
	MFI_DCMD_PR_SET_PROPERTIES =	0x01070300,
	MFI_DCMD_PR_START =		0x01070400,
	MFI_DCMD_PR_STOP =		0x01070500,
	MFI_DCMD_TIME_SECS_GET =	0x01080201,
	MFI_DCMD_FLASH_FW_OPEN =	0x010f0100,
	MFI_DCMD_FLASH_FW_DOWNLOAD =	0x010f0200,
	MFI_DCMD_FLASH_FW_FLASH =	0x010f0300,
	MFI_DCMD_FLASH_FW_CLOSE =	0x010f0400,
	MFI_DCMD_PD_GET_LIST =		0x02010000,
	MFI_DCMD_PD_LIST_QUERY =	0x02010100,
	MFI_DCMD_PD_GET_INFO = 		0x02020000,
	MFI_DCMD_PD_STATE_SET =		0x02030100,
	MFI_DCMD_PD_REBUILD_START =	0x02040100,
	MFI_DCMD_PD_REBUILD_ABORT =	0x02040200,
	MFI_DCMD_PD_CLEAR_START =	0x02050100,
	MFI_DCMD_PD_CLEAR_ABORT =	0x02050200,
	MFI_DCMD_PD_GET_PROGRESS =	0x02060000,
	MFI_DCMD_PD_LOCATE_START =	0x02070100,
	MFI_DCMD_PD_LOCATE_STOP =	0x02070200,
	MFI_DCMD_LD_MAP_GET_INFO =	0x0300e101,
	MFI_DCMD_LD_SYNC =		0x0300e102,
	MFI_DCMD_LD_GET_LIST =		0x03010000,
	MFI_DCMD_LD_GET_INFO =		0x03020000,
	MFI_DCMD_LD_GET_PROP =		0x03030000,
	MFI_DCMD_LD_SET_PROP =		0x03040000,
	MFI_DCMD_LD_INIT_START =	0x03060100,
	MFI_DCMD_LD_DELETE =		0x03090000,
	MFI_DCMD_CFG_READ =		0x04010000,
	MFI_DCMD_CFG_ADD =		0x04020000,
	MFI_DCMD_CFG_CLEAR =		0x04030000,
	MFI_DCMD_CFG_MAKE_SPARE =	0x04040000,
	MFI_DCMD_CFG_REMOVE_SPARE =	0x04050000,
	MFI_DCMD_CFG_FOREIGN_IMPORT =	0x04060400,
	MFI_DCMD_BBU_GET_STATUS =	0x05010000,
	MFI_DCMD_BBU_GET_CAPACITY_INFO =0x05020000,
	MFI_DCMD_BBU_GET_DESIGN_INFO =	0x05030000,
	MFI_DCMD_CLUSTER =		0x08000000,
	MFI_DCMD_CLUSTER_RESET_ALL =	0x08010100,
	MFI_DCMD_CLUSTER_RESET_LD =	0x08010200
} mfi_dcmd_t;

/* Modifiers for MFI_DCMD_CTRL_FLUSHCACHE */
#define MFI_FLUSHCACHE_CTRL	0x01
#define MFI_FLUSHCACHE_DISK	0x02

/* Modifiers for MFI_DCMD_CTRL_SHUTDOWN */
#define MFI_SHUTDOWN_SPINDOWN	0x01

/*
 * MFI Frame flags
 */
#define MFI_FRAME_POST_IN_REPLY_QUEUE		0x0000
#define MFI_FRAME_DONT_POST_IN_REPLY_QUEUE	0x0001
#define MFI_FRAME_SGL32				0x0000
#define MFI_FRAME_SGL64				0x0002
#define MFI_FRAME_SENSE32			0x0000
#define MFI_FRAME_SENSE64			0x0004
#define MFI_FRAME_DIR_NONE			0x0000
#define MFI_FRAME_DIR_WRITE			0x0008
#define MFI_FRAME_DIR_READ			0x0010
#define MFI_FRAME_DIR_BOTH			0x0018
#define MFI_FRAME_IEEE_SGL			0x0020

/* ThunderBolt Specific */

/*
 * Pre-TB command size and TB command size.
 * We will be checking it at the load time for the time being
 */
#define MR_COMMAND_SIZE (MFI_FRAME_SIZE*20) /* 1280 bytes */

#define MEGASAS_THUNDERBOLT_MSG_ALLIGNMENT  256
/*
 * We are defining only 128 byte message to reduce memory move over head
 * and also it will reduce the SRB extension size by 128byte compared with
 * 256 message size
 */
#define MEGASAS_THUNDERBOLT_NEW_MSG_SIZE	256
#define MEGASAS_THUNDERBOLT_MAX_COMMANDS	1024
#define MEGASAS_THUNDERBOLT_MAX_REPLY_COUNT	1024
#define MEGASAS_THUNDERBOLT_REPLY_SIZE		8
#define MEGASAS_THUNDERBOLT_MAX_CHAIN_COUNT	1
#define MEGASAS_MAX_SZ_CHAIN_FRAME		1024

#define MPI2_FUNCTION_PASSTHRU_IO_REQUEST       0xF0
#define MPI2_FUNCTION_LD_IO_REQUEST             0xF1

#define MR_INTERNAL_MFI_FRAMES_SMID             1
#define MR_CTRL_EVENT_WAIT_SMID                 2
#define MR_INTERNAL_DRIVER_RESET_SMID           3


/* MFI Status codes */
typedef enum {
	MFI_STAT_OK =			0x00,
	MFI_STAT_INVALID_CMD,
	MFI_STAT_INVALID_DCMD,
	MFI_STAT_INVALID_PARAMETER,
	MFI_STAT_INVALID_SEQUENCE_NUMBER,
	MFI_STAT_ABORT_NOT_POSSIBLE,
	MFI_STAT_APP_HOST_CODE_NOT_FOUND,
	MFI_STAT_APP_IN_USE,
	MFI_STAT_APP_NOT_INITIALIZED,
	MFI_STAT_ARRAY_INDEX_INVALID,
	MFI_STAT_ARRAY_ROW_NOT_EMPTY,
	MFI_STAT_CONFIG_RESOURCE_CONFLICT,
	MFI_STAT_DEVICE_NOT_FOUND,
	MFI_STAT_DRIVE_TOO_SMALL,
	MFI_STAT_FLASH_ALLOC_FAIL,
	MFI_STAT_FLASH_BUSY,
	MFI_STAT_FLASH_ERROR =		0x10,
	MFI_STAT_FLASH_IMAGE_BAD,
	MFI_STAT_FLASH_IMAGE_INCOMPLETE,
	MFI_STAT_FLASH_NOT_OPEN,
	MFI_STAT_FLASH_NOT_STARTED,
	MFI_STAT_FLUSH_FAILED,
	MFI_STAT_HOST_CODE_NOT_FOUNT,
	MFI_STAT_LD_CC_IN_PROGRESS,
	MFI_STAT_LD_INIT_IN_PROGRESS,
	MFI_STAT_LD_LBA_OUT_OF_RANGE,
	MFI_STAT_LD_MAX_CONFIGURED,
	MFI_STAT_LD_NOT_OPTIMAL,
	MFI_STAT_LD_RBLD_IN_PROGRESS,
	MFI_STAT_LD_RECON_IN_PROGRESS,
	MFI_STAT_LD_WRONG_RAID_LEVEL,
	MFI_STAT_MAX_SPARES_EXCEEDED,
	MFI_STAT_MEMORY_NOT_AVAILABLE =	0x20,
	MFI_STAT_MFC_HW_ERROR,
	MFI_STAT_NO_HW_PRESENT,
	MFI_STAT_NOT_FOUND,
	MFI_STAT_NOT_IN_ENCL,
	MFI_STAT_PD_CLEAR_IN_PROGRESS,
	MFI_STAT_PD_TYPE_WRONG,
	MFI_STAT_PR_DISABLED,
	MFI_STAT_ROW_INDEX_INVALID,
	MFI_STAT_SAS_CONFIG_INVALID_ACTION,
	MFI_STAT_SAS_CONFIG_INVALID_DATA,
	MFI_STAT_SAS_CONFIG_INVALID_PAGE,
	MFI_STAT_SAS_CONFIG_INVALID_TYPE,
	MFI_STAT_SCSI_DONE_WITH_ERROR,
	MFI_STAT_SCSI_IO_FAILED,
	MFI_STAT_SCSI_RESERVATION_CONFLICT,
	MFI_STAT_SHUTDOWN_FAILED =	0x30,
	MFI_STAT_TIME_NOT_SET,
	MFI_STAT_WRONG_STATE,
	MFI_STAT_LD_OFFLINE,
	MFI_STAT_PEER_NOTIFICATION_REJECTED,
	MFI_STAT_PEER_NOTIFICATION_FAILED,
	MFI_STAT_RESERVATION_IN_PROGRESS,
	MFI_STAT_I2C_ERRORS_DETECTED,
	MFI_STAT_PCI_ERRORS_DETECTED,
	MFI_STAT_DIAG_FAILED,
	MFI_STAT_BOOT_MSG_PENDING,
	MFI_STAT_FOREIGN_CONFIG_INCOMPLETE,
	MFI_STAT_INVALID_STATUS =	0xFF
} mfi_status_t;

typedef enum {
	MFI_EVT_CLASS_DEBUG =		-2,
	MFI_EVT_CLASS_PROGRESS =	-1,
	MFI_EVT_CLASS_INFO =		0,
	MFI_EVT_CLASS_WARNING =		1,
	MFI_EVT_CLASS_CRITICAL =	2,
	MFI_EVT_CLASS_FATAL =		3,
	MFI_EVT_CLASS_DEAD =		4
} mfi_evt_class_t;

typedef enum {
	MFI_EVT_LOCALE_LD =		0x0001,
	MFI_EVT_LOCALE_PD =		0x0002,
	MFI_EVT_LOCALE_ENCL =		0x0004,
	MFI_EVT_LOCALE_BBU =		0x0008,
	MFI_EVT_LOCALE_SAS =		0x0010,
	MFI_EVT_LOCALE_CTRL =		0x0020,
	MFI_EVT_LOCALE_CONFIG =		0x0040,
	MFI_EVT_LOCALE_CLUSTER =	0x0080,
	MFI_EVT_LOCALE_ALL =		0xffff
} mfi_evt_locale_t;

typedef enum {
	MR_EVT_ARGS_NONE =		0x00,
	MR_EVT_ARGS_CDB_SENSE,
	MR_EVT_ARGS_LD,
	MR_EVT_ARGS_LD_COUNT,
	MR_EVT_ARGS_LD_LBA,
	MR_EVT_ARGS_LD_OWNER,
	MR_EVT_ARGS_LD_LBA_PD_LBA,
	MR_EVT_ARGS_LD_PROG,
	MR_EVT_ARGS_LD_STATE,
	MR_EVT_ARGS_LD_STRIP,
	MR_EVT_ARGS_PD,
	MR_EVT_ARGS_PD_ERR,
	MR_EVT_ARGS_PD_LBA,
	MR_EVT_ARGS_PD_LBA_LD,
	MR_EVT_ARGS_PD_PROG,
	MR_EVT_ARGS_PD_STATE,
	MR_EVT_ARGS_PCI,
	MR_EVT_ARGS_RATE,
	MR_EVT_ARGS_STR,
	MR_EVT_ARGS_TIME,
	MR_EVT_ARGS_ECC
} mfi_evt_args;

#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED	0x0152
#define MR_EVT_PD_REMOVED			0x0070
#define MR_EVT_PD_INSERTED			0x005b
#define MR_EVT_LD_CHANGE			0x0051

typedef enum {
	MR_LD_CACHE_WRITE_BACK =	0x01,
	MR_LD_CACHE_WRITE_ADAPTIVE =	0x02,
	MR_LD_CACHE_READ_AHEAD =	0x04,
	MR_LD_CACHE_READ_ADAPTIVE =	0x08,
	MR_LD_CACHE_WRITE_CACHE_BAD_BBU=0x10,
	MR_LD_CACHE_ALLOW_WRITE_CACHE =	0x20,
	MR_LD_CACHE_ALLOW_READ_CACHE =	0x40
} mfi_ld_cache;
#define	MR_LD_CACHE_MASK	0x7f

#define	MR_LD_CACHE_POLICY_READ_AHEAD_NONE		0
#define	MR_LD_CACHE_POLICY_READ_AHEAD_ALWAYS		MR_LD_CACHE_READ_AHEAD
#define	MR_LD_CACHE_POLICY_READ_AHEAD_ADAPTIVE		\
	(MR_LD_CACHE_READ_AHEAD | MR_LD_CACHE_READ_ADAPTIVE)
#define	MR_LD_CACHE_POLICY_WRITE_THROUGH		0
#define	MR_LD_CACHE_POLICY_WRITE_BACK			MR_LD_CACHE_WRITE_BACK
#define	MR_LD_CACHE_POLICY_IO_CACHED			\
	(MR_LD_CACHE_ALLOW_WRITE_CACHE | MR_LD_CACHE_ALLOW_READ_CACHE)
#define	MR_LD_CACHE_POLICY_IO_DIRECT			0

typedef enum {
	MR_PD_CACHE_UNCHANGED  =	0,
	MR_PD_CACHE_ENABLE =		1,
	MR_PD_CACHE_DISABLE =		2
} mfi_pd_cache;

typedef enum {
	MR_PD_QUERY_TYPE_ALL =		0,
	MR_PD_QUERY_TYPE_STATE =	1,
	MR_PD_QUERY_TYPE_POWER_STATE =	2,
	MR_PD_QUERY_TYPE_MEDIA_TYPE =	3,
	MR_PD_QUERY_TYPE_SPEED =	4,
	MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5 /*query for system drives */
} mfi_pd_query_type;

/*
 * Other propertities and definitions
 */
#define MFI_MAX_PD_CHANNELS	2
#define MFI_MAX_LD_CHANNELS	2
#define MFI_MAX_CHANNELS	(MFI_MAX_PD_CHANNELS + MFI_MAX_LD_CHANNELS)
#define MFI_MAX_CHANNEL_DEVS	128
#define MFI_DEFAULT_ID		-1
#define MFI_MAX_LUN		8
#define MFI_MAX_LD		64
#define	MFI_MAX_PD		256

#define MFI_FRAME_SIZE		64
#define MFI_MBOX_SIZE		12

/* Firmware flashing can take 40s */
#define MFI_POLL_TIMEOUT_SECS	50

/* Allow for speedier math calculations */
#define MFI_SECTOR_LEN		512

/* Scatter Gather elements */
struct mfi_sg32 {
	uint32_t	addr;
	uint32_t	len;
} __packed;

struct mfi_sg64 {
	uint64_t	addr;
	uint32_t	len;
} __packed;

struct mfi_sg_skinny {
	uint64_t	addr;
	uint32_t	len;
	uint32_t	flag;
} __packed;

union mfi_sgl {
	struct mfi_sg32		sg32[1];
	struct mfi_sg64		sg64[1];
	struct mfi_sg_skinny	sg_skinny[1];
} __packed;

/* Message frames.  All messages have a common header */
struct mfi_frame_header {
	uint8_t		cmd;
	uint8_t		sense_len;
	uint8_t		cmd_status;
	uint8_t		scsi_status;
	uint8_t		target_id;
	uint8_t		lun_id;
	uint8_t		cdb_len;
	uint8_t		sg_count;
	uint32_t	context;
	/*
	 * pad0 is MSI Specific. Not used by Driver. Zero the value before
	 * sending the command to f/w.
	 */
	uint32_t	pad0;
	uint16_t	flags;
#define MFI_FRAME_DATAOUT	0x08
#define MFI_FRAME_DATAIN	0x10
	uint16_t	timeout;
	uint32_t	data_len;
} __packed;

struct mfi_init_frame {
	struct mfi_frame_header	header;
	uint32_t	qinfo_new_addr_lo;
	uint32_t	qinfo_new_addr_hi;
	uint32_t	qinfo_old_addr_lo;
	uint32_t	qinfo_old_addr_hi;
	// Start LSIP200113393
	uint32_t	driver_ver_lo;      /*28h */
	uint32_t	driver_ver_hi;      /*2Ch */

	uint32_t	reserved[4];
	// End LSIP200113393
} __packed;

/*
 * Define MFI Address Context union.
 */
#ifdef MFI_ADDRESS_IS_uint64_t
    typedef uint64_t     MFI_ADDRESS;
#else
    typedef union _MFI_ADDRESS {
        struct {
            uint32_t     addressLow;
            uint32_t     addressHigh;
        } u;
        uint64_t     address;
    } MFI_ADDRESS, *PMFI_ADDRESS;
#endif

#define MFI_IO_FRAME_SIZE 40
struct mfi_io_frame {
	struct mfi_frame_header	header;
	uint32_t	sense_addr_lo;
	uint32_t	sense_addr_hi;
	uint32_t	lba_lo;
	uint32_t	lba_hi;
	union mfi_sgl	sgl;
} __packed;

#define MFI_PASS_FRAME_SIZE 48
struct mfi_pass_frame {
	struct mfi_frame_header header;
	uint32_t	sense_addr_lo;
	uint32_t	sense_addr_hi;
	uint8_t		cdb[16];
	union mfi_sgl	sgl;
} __packed;

#define MFI_DCMD_FRAME_SIZE 40
struct mfi_dcmd_frame {
	struct mfi_frame_header header;
	uint32_t	opcode;
	uint8_t		mbox[MFI_MBOX_SIZE];
	union mfi_sgl	sgl;
} __packed;

struct mfi_abort_frame {
	struct mfi_frame_header header;
	uint32_t	abort_context;
	/* pad is changed to reserved.*/
	uint32_t	reserved0;
	uint32_t	abort_mfi_addr_lo;
	uint32_t	abort_mfi_addr_hi;
	uint32_t	reserved1[6];
} __packed;

struct mfi_smp_frame {
	struct mfi_frame_header header;
	uint64_t	sas_addr;
	union {
		struct mfi_sg32 sg32[2];
		struct mfi_sg64 sg64[2];
	} sgl;
} __packed;

struct mfi_stp_frame {
	struct mfi_frame_header header;
	uint16_t	fis[10];
	uint32_t	stp_flags;
	union {
		struct mfi_sg32 sg32[2];
		struct mfi_sg64 sg64[2];
	} sgl;
} __packed;

union mfi_frame {
	struct mfi_frame_header header;
	struct mfi_init_frame	init;
	/* ThunderBolt Initialization */
	struct mfi_io_frame	io;
	struct mfi_pass_frame	pass;
	struct mfi_dcmd_frame	dcmd;
	struct mfi_abort_frame	abort;
	struct mfi_smp_frame	smp;
	struct mfi_stp_frame	stp;
	uint8_t			bytes[MFI_FRAME_SIZE];
};

#define MFI_SENSE_LEN 128
struct mfi_sense {
	uint8_t		data[MFI_SENSE_LEN];
};

/* The queue init structure that is passed with the init message */
struct mfi_init_qinfo {
	uint32_t	flags;
	uint32_t	rq_entries;
	uint32_t	rq_addr_lo;
	uint32_t	rq_addr_hi;
	uint32_t	pi_addr_lo;
	uint32_t	pi_addr_hi;
	uint32_t	ci_addr_lo;
	uint32_t	ci_addr_hi;
} __packed;

/* SAS (?) controller properties, part of mfi_ctrl_info */
struct mfi_ctrl_props {
	uint16_t	seq_num;
	uint16_t	pred_fail_poll_interval;
	uint16_t	intr_throttle_cnt;
	uint16_t	intr_throttle_timeout;
	uint8_t		rebuild_rate;
	uint8_t		patrol_read_rate;
	uint8_t		bgi_rate;
	uint8_t		cc_rate;
	uint8_t		recon_rate;
	uint8_t		cache_flush_interval;
	uint8_t		spinup_drv_cnt;
	uint8_t		spinup_delay;
	uint8_t		cluster_enable;
	uint8_t		coercion_mode;
	uint8_t		alarm_enable;
	uint8_t		disable_auto_rebuild;
	uint8_t		disable_battery_warn;
	uint8_t		ecc_bucket_size;
	uint16_t	ecc_bucket_leak_rate;
	uint8_t		restore_hotspare_on_insertion;
	uint8_t		expose_encl_devices;
	uint8_t		maintainPdFailHistory;
	uint8_t		disallowHostRequestReordering;
	/* set TRUE to abort CC on detecting an inconsistency */
	uint8_t		abortCCOnError;
	/* load balance mode (MR_LOAD_BALANCE_MODE) */
	uint8_t		loadBalanceMode;
	/*
	 * 0 - use auto detect logic of backplanes like SGPIO, i2c SEP using
	 *     h/w mechansim like GPIO pins
	 * 1 - disable auto detect SGPIO,
	 * 2 - disable i2c SEP auto detect
	 * 3 - disable both auto detect
	 */
	uint8_t		disableAutoDetectBackplane;
	/*
	 * % of source LD to be reserved for a VDs snapshot in snapshot
	 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on
	 */
	uint8_t		snapVDSpace;

	/*
	 * Add properties that can be controlled by a bit in the following
	 * structure.
	 */
	struct {
		/* set TRUE to disable copyBack (0=copback enabled) */
		uint32_t	copyBackDisabled		:1;
		uint32_t	SMARTerEnabled			:1;
		uint32_t	prCorrectUnconfiguredAreas	:1;
		uint32_t	useFdeOnly			:1;
		uint32_t	disableNCQ			:1;
		uint32_t	SSDSMARTerEnabled		:1;
		uint32_t	SSDPatrolReadEnabled		:1;
		uint32_t	enableSpinDownUnconfigured	:1;
		uint32_t	autoEnhancedImport		:1;
		uint32_t	enableSecretKeyControl		:1;
		uint32_t	disableOnlineCtrlReset		:1;
		uint32_t	allowBootWithPinnedCache	:1;
		uint32_t	disableSpinDownHS		:1;
		uint32_t	enableJBOD			:1;
		uint32_t	reserved			:18;
	} OnOffProperties;
	/*
	 * % of source LD to be reserved for auto snapshot in snapshot
	 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on.
	 */
	uint8_t		autoSnapVDSpace;
	/*
	 * Snapshot writeable VIEWs capacity as a % of source LD capacity:
	 * 0=READ only, 1=5%, 2=10%, 3=15% and so on.
	 */
	uint8_t		viewSpace;
	/* # of idle minutes before device is spun down (0=use FW defaults) */
	uint16_t	spinDownTime;
	uint8_t		reserved[24];
} __packed;

/* PCI information about the card. */
struct mfi_info_pci {
	uint16_t	vendor;
	uint16_t	device;
	uint16_t	subvendor;
	uint16_t	subdevice;
	uint8_t		reserved[24];
} __packed;

/* Host (front end) interface information */
struct mfi_info_host {
	uint8_t		type;
#define MFI_INFO_HOST_PCIX	0x01
#define MFI_INFO_HOST_PCIE	0x02
#define MFI_INFO_HOST_ISCSI	0x04
#define MFI_INFO_HOST_SAS3G	0x08
	uint8_t		reserved[6];
	uint8_t		port_count;
	uint64_t	port_addr[8];
} __packed;

/* Device (back end) interface information */
struct mfi_info_device {
	uint8_t		type;
#define MFI_INFO_DEV_SPI	0x01
#define MFI_INFO_DEV_SAS3G	0x02
#define MFI_INFO_DEV_SATA1	0x04
#define MFI_INFO_DEV_SATA3G	0x08
	uint8_t		reserved[6];
	uint8_t		port_count;
	uint64_t	port_addr[8];
} __packed;

/* Firmware component information */
struct mfi_info_component {
	char		 name[8];
	char		 version[32];
	char		 build_date[16];
	char		 build_time[16];
} __packed;

/* Controller default settings */
struct mfi_defaults {
	uint64_t	sas_addr;
	uint8_t		phy_polarity;
	uint8_t		background_rate;
	uint8_t		stripe_size;
	uint8_t		flush_time;
	uint8_t		write_back;
	uint8_t		read_ahead;
	uint8_t		cache_when_bbu_bad;
	uint8_t		cached_io;
	uint8_t		smart_mode;
	uint8_t		alarm_disable;
	uint8_t		coercion;
	uint8_t		zrc_config;
	uint8_t		dirty_led_shows_drive_activity;
	uint8_t		bios_continue_on_error;
	uint8_t		spindown_mode;
	uint8_t		allowed_device_types;
	uint8_t		allow_mix_in_enclosure;
	uint8_t		allow_mix_in_ld;
	uint8_t		allow_sata_in_cluster;
	uint8_t		max_chained_enclosures;
	uint8_t		disable_ctrl_r;
	uint8_t		enabel_web_bios;
	uint8_t		phy_polarity_split;
	uint8_t		direct_pd_mapping;
	uint8_t		bios_enumerate_lds;
	uint8_t		restored_hot_spare_on_insertion;
	uint8_t		expose_enclosure_devices;
	uint8_t		maintain_pd_fail_history;
	uint8_t		resv[28];
} __packed;

/* Controller default settings */
struct mfi_bios_data {
	uint16_t	boot_target_id;
	uint8_t		do_not_int_13;
	uint8_t		continue_on_error;
	uint8_t		verbose;
	uint8_t		geometry;
	uint8_t		expose_all_drives;
	uint8_t		reserved[56];
	uint8_t		check_sum;
} __packed;

/* SAS (?) controller info, returned from MFI_DCMD_CTRL_GETINFO. */
struct mfi_ctrl_info {
	struct mfi_info_pci	pci;
	struct mfi_info_host	host;
	struct mfi_info_device	device;

	/* Firmware components that are present and active. */
	uint32_t		image_check_word;
	uint32_t		image_component_count;
	struct mfi_info_component image_component[8];

	/* Firmware components that have been flashed but are inactive */
	uint32_t		pending_image_component_count;
	struct mfi_info_component pending_image_component[8];

	uint8_t			max_arms;
	uint8_t			max_spans;
	uint8_t			max_arrays;
	uint8_t			max_lds;
	char			product_name[80];
	char			serial_number[32];
	uint32_t		hw_present;
#define MFI_INFO_HW_BBU		0x01
#define MFI_INFO_HW_ALARM	0x02
#define MFI_INFO_HW_NVRAM	0x04
#define MFI_INFO_HW_UART	0x08
	uint32_t		current_fw_time;
	uint16_t		max_cmds;
	uint16_t		max_sg_elements;
	uint32_t		max_request_size;
	uint16_t		lds_present;
	uint16_t		lds_degraded;
	uint16_t		lds_offline;
	uint16_t		pd_present;
	uint16_t		pd_disks_present;
	uint16_t		pd_disks_pred_failure;
	uint16_t		pd_disks_failed;
	uint16_t		nvram_size;
	uint16_t		memory_size;
	uint16_t		flash_size;
	uint16_t		ram_correctable_errors;
	uint16_t		ram_uncorrectable_errors;
	uint8_t			cluster_allowed;
	uint8_t			cluster_active;
	uint16_t		max_strips_per_io;

	uint32_t		raid_levels;
#define MFI_INFO_RAID_0		0x01
#define MFI_INFO_RAID_1		0x02
#define MFI_INFO_RAID_5		0x04
#define MFI_INFO_RAID_1E	0x08
#define MFI_INFO_RAID_6		0x10

	uint32_t		adapter_ops;
#define MFI_INFO_AOPS_RBLD_RATE		0x0001
#define MFI_INFO_AOPS_CC_RATE		0x0002
#define MFI_INFO_AOPS_BGI_RATE		0x0004
#define MFI_INFO_AOPS_RECON_RATE	0x0008
#define MFI_INFO_AOPS_PATROL_RATE	0x0010
#define MFI_INFO_AOPS_ALARM_CONTROL	0x0020
#define MFI_INFO_AOPS_CLUSTER_SUPPORTED	0x0040
#define MFI_INFO_AOPS_BBU		0x0080
#define MFI_INFO_AOPS_SPANNING_ALLOWED	0x0100
#define MFI_INFO_AOPS_DEDICATED_SPARES	0x0200
#define MFI_INFO_AOPS_REVERTIBLE_SPARES	0x0400
#define MFI_INFO_AOPS_FOREIGN_IMPORT	0x0800
#define MFI_INFO_AOPS_SELF_DIAGNOSTIC	0x1000
#define MFI_INFO_AOPS_MIXED_ARRAY	0x2000
#define MFI_INFO_AOPS_GLOBAL_SPARES	0x4000

	uint32_t		ld_ops;
#define MFI_INFO_LDOPS_READ_POLICY	0x01
#define MFI_INFO_LDOPS_WRITE_POLICY	0x02
#define MFI_INFO_LDOPS_IO_POLICY	0x04
#define MFI_INFO_LDOPS_ACCESS_POLICY	0x08
#define MFI_INFO_LDOPS_DISK_CACHE_POLICY 0x10

	struct {
		uint8_t		min;
		uint8_t		max;
		uint8_t		reserved[2];
	} __packed stripe_sz_ops;

	uint32_t		pd_ops;
#define MFI_INFO_PDOPS_FORCE_ONLINE	0x01
#define MFI_INFO_PDOPS_FORCE_OFFLINE	0x02
#define MFI_INFO_PDOPS_FORCE_REBUILD	0x04

	uint32_t		pd_mix_support;
#define MFI_INFO_PDMIX_SAS		0x01
#define MFI_INFO_PDMIX_SATA		0x02
#define MFI_INFO_PDMIX_ENCL		0x04
#define MFI_INFO_PDMIX_LD		0x08
#define MFI_INFO_PDMIX_SATA_CLUSTER	0x10

	uint8_t			ecc_bucket_count;
	uint8_t			reserved2[11];
	struct mfi_ctrl_props	properties;
	char			package_version[0x60];
	uint8_t			pad[0x800 - 0x6a0];
} __packed;

/* keep track of an event. */
union mfi_evt {
	struct {
		uint16_t	locale;
		uint8_t		reserved;
		int8_t		evt_class;
	} members;
	uint32_t		word;
} __packed;

/* event log state. */
struct mfi_evt_log_state {
	uint32_t		newest_seq_num;
	uint32_t		oldest_seq_num;
	uint32_t		clear_seq_num;
	uint32_t		shutdown_seq_num;
	uint32_t		boot_seq_num;
} __packed;

struct mfi_progress {
	uint16_t		progress;
	uint16_t		elapsed_seconds;
} __packed;

struct mfi_evt_ld {
	uint16_t		target_id;
	uint8_t			ld_index;
	uint8_t			reserved;
} __packed;

struct mfi_evt_pd {
	uint16_t		device_id;
	uint8_t			enclosure_index;
	uint8_t			slot_number;
} __packed;

/* SAS (?) event detail, returned from MFI_DCMD_CTRL_EVENT_WAIT. */
struct mfi_evt_detail {
	uint32_t		seq;
	uint32_t		time;
	uint32_t		code;
	union mfi_evt		evt_class;
	uint8_t			arg_type;
	uint8_t			reserved1[15];

	union {
		struct {
			struct mfi_evt_pd	pd;
			uint8_t			cdb_len;
			uint8_t			sense_len;
			uint8_t			reserved[2];
			uint8_t			cdb[16];
			uint8_t			sense[64];
		} cdb_sense;

		struct mfi_evt_ld		ld;

		struct {
			struct mfi_evt_ld	ld;
			uint64_t		count;
		} ld_count;

		struct {
			uint64_t		lba;
			struct mfi_evt_ld	ld;
		} ld_lba;

		struct {
			struct mfi_evt_ld	ld;
			uint32_t		pre_owner;
			uint32_t		new_owner;
		} ld_owner;

		struct {
			uint64_t		ld_lba;
			uint64_t		pd_lba;
			struct mfi_evt_ld	ld;
			struct mfi_evt_pd	pd;
		} ld_lba_pd_lba;

		struct {
			struct mfi_evt_ld	ld;
			struct mfi_progress	prog;
		} ld_prog;

		struct {
			struct mfi_evt_ld	ld;
			uint32_t		prev_state;
			uint32_t		new_state;
		} ld_state;

		struct {
			uint64_t		strip;
			struct mfi_evt_ld	ld;
		} ld_strip;

		struct mfi_evt_pd		pd;

		struct {
			struct mfi_evt_pd	pd;
			uint32_t		err;
		} pd_err;

		struct {
			uint64_t		lba;
			struct mfi_evt_pd	pd;
		} pd_lba;

		struct {
			uint64_t		lba;
			struct mfi_evt_pd	pd;
			struct mfi_evt_ld	ld;
		} pd_lba_ld;

		struct {
			struct mfi_evt_pd	pd;
			struct mfi_progress	prog;
		} pd_prog;

		struct {
			struct mfi_evt_pd	ld;
			uint32_t		prev_state;
			uint32_t		new_state;
		} pd_state;

		struct {
			uint16_t		venderId;
			uint16_t		deviceId;
			uint16_t		subVenderId;
			uint16_t		subDeviceId;
		} pci;

		uint32_t			rate;

		char				str[96];

		struct {
			uint32_t		rtc;
			uint16_t		elapsedSeconds;
		} time;

		struct {
			uint32_t		ecar;
			uint32_t		elog;
			char			str[64];
		} ecc;

		uint8_t		b[96];
		uint16_t	s[48];
		uint32_t	w[24];
		uint64_t	d[12];
	} args;

	char description[128];
} __packed;

struct mfi_evt_list {
	uint32_t		count;
	uint32_t		reserved;
	struct mfi_evt_detail	event[1];
} __packed;

union mfi_pd_ref {
	struct {
		uint16_t	device_id;
		uint16_t	seq_num;
	} v;
	uint32_t	ref;
} __packed;

union mfi_pd_ddf_type {
	struct {
		union {
			struct {
				uint16_t	forced_pd_guid	: 1;
				uint16_t	in_vd		: 1;
				uint16_t	is_global_spare	: 1;
				uint16_t	is_spare	: 1;
				uint16_t	is_foreign	: 1;
				uint16_t	reserved	: 7;
				uint16_t	intf		: 4;
			} pd_type;
			uint16_t	type;
		} v;
		uint16_t		reserved;
	} ddf;
	struct {
		uint32_t		reserved;
	} non_disk;
	uint32_t			type;
} __packed;

struct mfi_pd_progress {
	uint32_t			active;
#define	MFI_PD_PROGRESS_REBUILD	(1<<0)
#define	MFI_PD_PROGRESS_PATROL	(1<<1)
#define	MFI_PD_PROGRESS_CLEAR	(1<<2)
	struct mfi_progress		rbld;
	struct mfi_progress		patrol;
	struct mfi_progress		clear;
	struct mfi_progress		reserved[4];
} __packed;

struct mfi_pd_info {
	union mfi_pd_ref		ref;
	uint8_t				inquiry_data[96];
	uint8_t				vpd_page83[64];
	uint8_t				not_supported;
	uint8_t				scsi_dev_type;
	uint8_t				connected_port_bitmap;
	uint8_t				device_speed;
	uint32_t			media_err_count;
	uint32_t			other_err_count;
	uint32_t			pred_fail_count;
	uint32_t			last_pred_fail_event_seq_num;
	uint16_t			fw_state;	/* MFI_PD_STATE_* */
	uint8_t				disabled_for_removal;
	uint8_t				link_speed;
	union mfi_pd_ddf_type		state;
	struct {
		uint8_t			count;
		uint8_t			is_path_broken;
		uint8_t			reserved[6];
		uint64_t		sas_addr[4];
	} path_info;
	uint64_t			raw_size;
	uint64_t			non_coerced_size;
	uint64_t			coerced_size;
	uint16_t			encl_device_id;
	uint8_t				encl_index;
	uint8_t				slot_number;
	struct mfi_pd_progress		prog_info;
	uint8_t				bad_block_table_full;
	uint8_t				unusable_in_current_config;
	uint8_t				vpd_page83_ext[64];
	uint8_t				reserved[512-358];
} __packed;

struct mfi_pd_address {
	uint16_t		device_id;
	uint16_t		encl_device_id;
	uint8_t			encl_index;
	uint8_t			slot_number;
	uint8_t			scsi_dev_type;	/* 0 = disk */
	uint8_t			connect_port_bitmap;
	uint64_t		sas_addr[2];
} __packed;

#define MAX_SYS_PDS 240
struct mfi_pd_list {
	uint32_t		size;
	uint32_t		count;
	struct mfi_pd_address	addr[MAX_SYS_PDS];
} __packed;

enum mfi_pd_state {
	MFI_PD_STATE_UNCONFIGURED_GOOD = 0x00,
	MFI_PD_STATE_UNCONFIGURED_BAD = 0x01,
	MFI_PD_STATE_HOT_SPARE = 0x02,
	MFI_PD_STATE_OFFLINE = 0x10,
	MFI_PD_STATE_FAILED = 0x11,
	MFI_PD_STATE_REBUILD = 0x14,
	MFI_PD_STATE_ONLINE = 0x18,
	MFI_PD_STATE_COPYBACK = 0x20,
	MFI_PD_STATE_SYSTEM = 0x40
};

/*
 * "SYSTEM" disk appears to be "JBOD" support from the RAID controller.
 * Adding a #define to denote this.
 */
#define MFI_PD_STATE_JBOD MFI_PD_STATE_SYSTEM

union mfi_ld_ref {
	struct {
		uint8_t		target_id;
		uint8_t		reserved;
		uint16_t	seq;
	} v;
	uint32_t		ref;
} __packed;

struct mfi_ld_list {
	uint32_t		ld_count;
	uint32_t		reserved1;
	struct {
		union mfi_ld_ref	ld;
		uint8_t		state;
		uint8_t		reserved2[3];
		uint64_t	size;
	} ld_list[MFI_MAX_LD];
} __packed;

enum mfi_ld_access {
	MFI_LD_ACCESS_RW =	0,
	MFI_LD_ACCSSS_RO = 	2,
	MFI_LD_ACCESS_BLOCKED =	3,
};
#define MFI_LD_ACCESS_MASK	3

enum mfi_ld_state {
	MFI_LD_STATE_OFFLINE =			0,
	MFI_LD_STATE_PARTIALLY_DEGRADED =	1,
	MFI_LD_STATE_DEGRADED =			2,
	MFI_LD_STATE_OPTIMAL =			3
};

struct mfi_ld_props {
	union mfi_ld_ref	ld;
	char			name[16];
	uint8_t			default_cache_policy;
	uint8_t			access_policy;
	uint8_t			disk_cache_policy;
	uint8_t			current_cache_policy;
	uint8_t			no_bgi;
	uint8_t			reserved[7];
} __packed;

struct mfi_ld_params {
	uint8_t			primary_raid_level;
	uint8_t			raid_level_qualifier;
	uint8_t			secondary_raid_level;
	uint8_t			stripe_size;
	uint8_t			num_drives;
	uint8_t			span_depth;
	uint8_t			state;
	uint8_t			init_state;
#define	MFI_LD_PARAMS_INIT_NO		0
#define	MFI_LD_PARAMS_INIT_QUICK	1
#define	MFI_LD_PARAMS_INIT_FULL		2
	uint8_t			is_consistent;
	uint8_t			reserved1[6];
	uint8_t			isSSCD;
	uint8_t			reserved2[16];
} __packed;

struct mfi_ld_progress {
	uint32_t		active;
#define	MFI_LD_PROGRESS_CC	(1<<0)
#define	MFI_LD_PROGRESS_BGI	(1<<1)
#define	MFI_LD_PROGRESS_FGI	(1<<2)
#define	MFI_LD_PROGRESS_RECON	(1<<3)
	struct mfi_progress	cc;
	struct mfi_progress	bgi;
	struct mfi_progress	fgi;
	struct mfi_progress	recon;
	struct mfi_progress	reserved[4];
} __packed;

struct mfi_span {
	uint64_t		start_block;
	uint64_t		num_blocks;
	uint16_t		array_ref;
	uint8_t			reserved[6];
} __packed;

#define	MFI_MAX_SPAN_DEPTH	8
struct mfi_ld_config {
	struct mfi_ld_props	properties;
	struct mfi_ld_params	params;
	struct mfi_span		span[MFI_MAX_SPAN_DEPTH];
} __packed;

struct mfi_ld_info {
	struct mfi_ld_config	ld_config;
	uint64_t		size;
	struct mfi_ld_progress	progress;
	uint16_t		cluster_owner;
	uint8_t			reconstruct_active;
	uint8_t			reserved1[1];
	uint8_t			vpd_page83[64];
	uint8_t			reserved2[16];
} __packed;

#define MFI_MAX_ARRAYS 16
struct mfi_spare {
	union mfi_pd_ref	ref;
	uint8_t			spare_type;
#define	MFI_SPARE_DEDICATED	(1 << 0)
#define	MFI_SPARE_REVERTIBLE	(1 << 1)
#define	MFI_SPARE_ENCL_AFFINITY	(1 << 2)
	uint8_t			reserved[2];
	uint8_t			array_count;
	uint16_t		array_ref[MFI_MAX_ARRAYS];
} __packed;

#define MFI_MAX_ROW_SIZE 32
struct mfi_array {
	uint64_t			size;
	uint8_t				num_drives;
	uint8_t				reserved;
	uint16_t			array_ref;
	uint8_t				pad[20];
	struct {
		union mfi_pd_ref	ref;	/* 0xffff == missing drive */
		uint16_t		fw_state;	/* MFI_PD_STATE_* */
		struct {
			uint8_t		pd;
			uint8_t		slot;
		} encl;
	} pd[MFI_MAX_ROW_SIZE];
} __packed;

struct mfi_config_data {
	uint32_t		size;
	uint16_t		array_count;
	uint16_t		array_size;
	uint16_t		log_drv_count;
	uint16_t		log_drv_size;
	uint16_t		spares_count;
	uint16_t		spares_size;
	uint8_t			reserved[16];
	struct mfi_array	array[0];
	struct mfi_ld_config	ld[0];
	struct mfi_spare	spare[0];
} __packed;

struct mfi_bbu_capacity_info {
	uint16_t		relative_charge;
	uint16_t		absolute_charge;
	uint16_t		remaining_capacity;
	uint16_t		full_charge_capacity;
	uint16_t		run_time_to_empty;
	uint16_t		average_time_to_empty;
	uint16_t		average_time_to_full;
	uint16_t		cycle_count;
	uint16_t		max_error;
	uint16_t		remaining_capacity_alarm;
	uint16_t		remaining_time_alarm;
	uint8_t			reserved[26];
} __packed;

struct mfi_bbu_design_info {
	uint32_t		mfg_date;
	uint16_t		design_capacity;
	uint16_t		design_voltage;
	uint16_t		spec_info;
	uint16_t		serial_number;
	uint16_t		pack_stat_config;
	uint8_t			mfg_name[12];
	uint8_t			device_name[8];
	uint8_t			device_chemistry[8];
	uint8_t			mfg_data[8];
	uint8_t			reserved[17];
} __packed;

struct mfi_ibbu_state {
	uint16_t		gas_guage_status;
	uint16_t		relative_charge;
	uint16_t		charger_system_state;
	uint16_t		charger_system_ctrl;
	uint16_t		charging_current;
	uint16_t		absolute_charge;
	uint16_t		max_error;
	uint8_t			reserved[18];
} __packed;

struct mfi_bbu_state {
	uint16_t		gas_guage_status;
	uint16_t		relative_charge;
	uint16_t		charger_status;
	uint16_t		remaining_capacity;
	uint16_t		full_charge_capacity;
	uint8_t			is_SOH_good;
	uint8_t			reserved[21];
} __packed;

union mfi_bbu_status_detail {
	struct mfi_ibbu_state	ibbu;
	struct mfi_bbu_state	bbu;
};

struct mfi_bbu_status {
	uint8_t			battery_type;
#define	MFI_BBU_TYPE_NONE	0
#define	MFI_BBU_TYPE_IBBU	1
#define	MFI_BBU_TYPE_BBU	2
	uint8_t			reserved;
	uint16_t		voltage;
	int16_t			current;
	uint16_t		temperature;
	uint32_t		fw_status;
#define	MFI_BBU_STATE_PACK_MISSING	(1 << 0)
#define	MFI_BBU_STATE_VOLTAGE_LOW	(1 << 1)
#define	MFI_BBU_STATE_TEMPERATURE_HIGH	(1 << 2)
#define	MFI_BBU_STATE_CHARGE_ACTIVE	(1 << 0)
#define	MFI_BBU_STATE_DISCHARGE_ACTIVE	(1 << 0)
	uint8_t			pad[20];
	union mfi_bbu_status_detail detail;
} __packed;

enum mfi_pr_state {
	MFI_PR_STATE_STOPPED = 0,
	MFI_PR_STATE_READY = 1,
	MFI_PR_STATE_ACTIVE = 2,
	MFI_PR_STATE_ABORTED = 0xff
};

struct mfi_pr_status {
	uint32_t		num_iteration;
	uint8_t			state;
	uint8_t			num_pd_done;
	uint8_t			reserved[10];
};

enum mfi_pr_opmode {
	MFI_PR_OPMODE_AUTO = 0,
	MFI_PR_OPMODE_MANUAL = 1,
	MFI_PR_OPMODE_DISABLED = 2
};

struct mfi_pr_properties {
	uint8_t			op_mode;
	uint8_t			max_pd;
	uint8_t			reserved;
	uint8_t			exclude_ld_count;
	uint16_t		excluded_ld[MFI_MAX_LD];
	uint8_t			cur_pd_map[MFI_MAX_PD / 8];
	uint8_t			last_pd_map[MFI_MAX_PD / 8];
	uint32_t		next_exec;
	uint32_t		exec_freq;
	uint32_t		clear_freq;
};

/* ThunderBolt support */

/*
 * Raid Context structure which describes MegaRAID specific IO Paramenters
 * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
 */
typedef struct _MPI2_SCSI_IO_VENDOR_UNIQUE {
	uint16_t	resvd0;		/* 0x00 - 0x01 */
	uint16_t	timeoutValue;	/* 0x02 - 0x03 */
	uint8_t		regLockFlags;
	uint8_t		armId;
	uint16_t	TargetID;	/* 0x06 - 0x07 */

	uint64_t	RegLockLBA;	/* 0x08 - 0x0F */

	uint32_t	RegLockLength;	/* 0x10 - 0x13 */

	uint16_t	SMID;		/* 0x14 - 0x15 nextLMId */
	uint8_t		exStatus;	/* 0x16 */
	uint8_t		Status;		/* 0x17 status */

	uint8_t		RAIDFlags;	/* 0x18 */
	uint8_t		numSGE;		/* 0x19 numSge */
	uint16_t	configSeqNum;	/* 0x1A - 0x1B */
	uint8_t		spanArm;	/* 0x1C */
	uint8_t		resvd2[3];	/* 0x1D - 0x1F */
} MPI2_SCSI_IO_VENDOR_UNIQUE, MPI25_SCSI_IO_VENDOR_UNIQUE;

/*****************************************************************************
*
*        Message Functions
*
*****************************************************************************/

#define NA_MPI2_FUNCTION_SCSI_IO_REQUEST            (0x00) /* SCSI IO */
#define MPI2_FUNCTION_SCSI_TASK_MGMT                (0x01) /* SCSI Task Management */
#define MPI2_FUNCTION_IOC_INIT                      (0x02) /* IOC Init */
#define MPI2_FUNCTION_IOC_FACTS                     (0x03) /* IOC Facts */
#define MPI2_FUNCTION_CONFIG                        (0x04) /* Configuration */
#define MPI2_FUNCTION_PORT_FACTS                    (0x05) /* Port Facts */
#define MPI2_FUNCTION_PORT_ENABLE                   (0x06) /* Port Enable */
#define MPI2_FUNCTION_EVENT_NOTIFICATION            (0x07) /* Event Notification */
#define MPI2_FUNCTION_EVENT_ACK                     (0x08) /* Event Acknowledge */
#define MPI2_FUNCTION_FW_DOWNLOAD                   (0x09) /* FW Download */
#define MPI2_FUNCTION_TARGET_ASSIST                 (0x0B) /* Target Assist */
#define MPI2_FUNCTION_TARGET_STATUS_SEND            (0x0C) /* Target Status Send */
#define MPI2_FUNCTION_TARGET_MODE_ABORT             (0x0D) /* Target Mode Abort */
#define MPI2_FUNCTION_FW_UPLOAD                     (0x12) /* FW Upload */
#define MPI2_FUNCTION_RAID_ACTION                   (0x15) /* RAID Action */
#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH      (0x16) /* SCSI IO RAID Passthrough */
#define MPI2_FUNCTION_TOOLBOX                       (0x17) /* Toolbox */
#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR      (0x18) /* SCSI Enclosure Processor */
#define MPI2_FUNCTION_SMP_PASSTHROUGH               (0x1A) /* SMP Passthrough */
#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL           (0x1B) /* SAS IO Unit Control */
#define MPI2_FUNCTION_SATA_PASSTHROUGH              (0x1C) /* SATA Passthrough */
#define MPI2_FUNCTION_DIAG_BUFFER_POST              (0x1D) /* Diagnostic Buffer Post */
#define MPI2_FUNCTION_DIAG_RELEASE                  (0x1E) /* Diagnostic Release */
#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST      (0x24) /* Target Command Buffer Post Base */
#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST      (0x25) /* Target Command Buffer Post List */
#define MPI2_FUNCTION_RAID_ACCELERATOR              (0x2C) /* RAID Accelerator */
#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION   (0x2F) /* Host Based Discovery Action */
#define MPI2_FUNCTION_PWR_MGMT_CONTROL              (0x30) /* Power Management Control */
#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC          (0xF0) /* beginning of product-specific range */
#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC          (0xFF) /* end of product-specific range */

/* Doorbell functions */
#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET        (0x40)
#define MPI2_FUNCTION_HANDSHAKE                     (0x42)

/*****************************************************************************
*
*        MPI Version Definitions
*
*****************************************************************************/

#define MPI2_VERSION_MAJOR                  (0x02)
#define MPI2_VERSION_MINOR                  (0x00)
#define MPI2_VERSION_MAJOR_MASK             (0xFF00)
#define MPI2_VERSION_MAJOR_SHIFT            (8)
#define MPI2_VERSION_MINOR_MASK             (0x00FF)
#define MPI2_VERSION_MINOR_SHIFT            (0)
#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) |   \
                                      MPI2_VERSION_MINOR)

#define MPI2_VERSION_02_00                  (0x0200)

/* versioning for this MPI header set */
#define MPI2_HEADER_VERSION_UNIT            (0x10)
#define MPI2_HEADER_VERSION_DEV             (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
#define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
#define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) |		\
					MPI2_HEADER_VERSION_DEV)


/* IOCInit Request message */
struct MPI2_IOC_INIT_REQUEST {
	uint8_t		WhoInit;                        /* 0x00 */
	uint8_t		Reserved1;                      /* 0x01 */
	uint8_t		ChainOffset;                    /* 0x02 */
	uint8_t		Function;                       /* 0x03 */
	uint16_t	Reserved2;                      /* 0x04 */
	uint8_t		Reserved3;                      /* 0x06 */
	uint8_t		MsgFlags;                       /* 0x07 */
	uint8_t		VP_ID;                          /* 0x08 */
	uint8_t		VF_ID;                          /* 0x09 */
	uint16_t	Reserved4;                      /* 0x0A */
	uint16_t	MsgVersion;                     /* 0x0C */
	uint16_t	HeaderVersion;                  /* 0x0E */
	uint32_t	Reserved5;                      /* 0x10 */
	uint16_t	Reserved6;                      /* 0x14 */
	uint8_t		Reserved7;                      /* 0x16 */
	uint8_t		HostMSIxVectors;                /* 0x17 */
	uint16_t	Reserved8;                      /* 0x18 */
	uint16_t	SystemRequestFrameSize;         /* 0x1A */
	uint16_t	ReplyDescriptorPostQueueDepth;  /* 0x1C */
	uint16_t	ReplyFreeQueueDepth;            /* 0x1E */
	uint32_t	SenseBufferAddressHigh;         /* 0x20 */
	uint32_t	SystemReplyAddressHigh;         /* 0x24 */
	uint64_t	SystemRequestFrameBaseAddress;  /* 0x28 */
	uint64_t	ReplyDescriptorPostQueueAddress;/* 0x30 */
	uint64_t	ReplyFreeQueueAddress;          /* 0x38 */
	uint64_t	TimeStamp;                      /* 0x40 */
};

/* WhoInit values */
#define MPI2_WHOINIT_NOT_INITIALIZED            (0x00)
#define MPI2_WHOINIT_SYSTEM_BIOS                (0x01)
#define MPI2_WHOINIT_ROM_BIOS                   (0x02)
#define MPI2_WHOINIT_PCI_PEER                   (0x03)
#define MPI2_WHOINIT_HOST_DRIVER                (0x04)
#define MPI2_WHOINIT_MANUFACTURER               (0x05)

struct MPI2_SGE_CHAIN_UNION {
	uint16_t	Length;
	uint8_t		NextChainOffset;
	uint8_t		Flags;
	union {
		uint32_t	Address32;
		uint64_t	Address64;
	} u;
};

struct MPI2_IEEE_SGE_SIMPLE32 {
	uint32_t	Address;
	uint32_t	FlagsLength;
};

struct MPI2_IEEE_SGE_SIMPLE64 {
	uint64_t	Address;
	uint32_t	Length;
	uint16_t	Reserved1;
	uint8_t		Reserved2;
	uint8_t		Flags;
};

typedef union _MPI2_IEEE_SGE_SIMPLE_UNION {
	struct MPI2_IEEE_SGE_SIMPLE32	Simple32;
	struct MPI2_IEEE_SGE_SIMPLE64	Simple64;
} MPI2_IEEE_SGE_SIMPLE_UNION;

typedef struct _MPI2_SGE_SIMPLE_UNION {
	uint32_t	FlagsLength;
	union {
		uint32_t	Address32;
		uint64_t	Address64;
	} u;
} MPI2_SGE_SIMPLE_UNION;

/****************************************************************************
*  IEEE SGE field definitions and masks
****************************************************************************/

/* Flags field bit definitions */

#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK   (0x80)

#define MPI2_IEEE32_SGE_FLAGS_SHIFT             (24)

#define MPI2_IEEE32_SGE_LENGTH_MASK             (0x00FFFFFF)

/* Element Type */

#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT      (0x00)
#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT       (0x80)

/* Data Location Address Space */

#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK           (0x03)
#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR         (0x00)
#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR         (0x01)
#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR         (0x02)
#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03)

/* Address Size */

#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)

/*******************/
/* SCSI IO Control bits */
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK      (0xFC000000)
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT     (26)

#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK  (0x03000000)
#define MPI2_SCSIIO_CONTROL_NODATATRANSFER      (0x00000000)
#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL       (0x03000000)

#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK        (0x00007800)
#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT       (11)

#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK  (0x00000700)
#define MPI2_SCSIIO_CONTROL_SIMPLEQ             (0x00000000)
#define MPI2_SCSIIO_CONTROL_HEADOFQ             (0x00000100)
#define MPI2_SCSIIO_CONTROL_ORDEREDQ            (0x00000200)
#define MPI2_SCSIIO_CONTROL_ACAQ                (0x00000400)

#define MPI2_SCSIIO_CONTROL_TLR_MASK            (0x000000C0)
#define MPI2_SCSIIO_CONTROL_NO_TLR              (0x00000000)
#define MPI2_SCSIIO_CONTROL_TLR_ON              (0x00000040)
#define MPI2_SCSIIO_CONTROL_TLR_OFF             (0x00000080)

/*******************/

typedef struct {
	uint8_t		CDB[20];                    /* 0x00 */
	uint32_t	PrimaryReferenceTag;        /* 0x14 */
	uint16_t	PrimaryApplicationTag;      /* 0x18 */
	uint16_t	PrimaryApplicationTagMask;  /* 0x1A */
	uint32_t	TransferLength;             /* 0x1C */
} MPI2_SCSI_IO_CDB_EEDP32;


typedef union _MPI2_IEEE_SGE_CHAIN_UNION {
	struct MPI2_IEEE_SGE_SIMPLE32	Chain32;
	struct MPI2_IEEE_SGE_SIMPLE64	Chain64;
} MPI2_IEEE_SGE_CHAIN_UNION;

typedef union _MPI2_SIMPLE_SGE_UNION {
	MPI2_SGE_SIMPLE_UNION		MpiSimple;
	MPI2_IEEE_SGE_SIMPLE_UNION	IeeeSimple;
} MPI2_SIMPLE_SGE_UNION;

typedef union _MPI2_SGE_IO_UNION {
	MPI2_SGE_SIMPLE_UNION		MpiSimple;
	struct MPI2_SGE_CHAIN_UNION	MpiChain;
	MPI2_IEEE_SGE_SIMPLE_UNION	IeeeSimple;
	MPI2_IEEE_SGE_CHAIN_UNION	IeeeChain;
} MPI2_SGE_IO_UNION;

typedef union {
	uint8_t			CDB32[32];
	MPI2_SCSI_IO_CDB_EEDP32	EEDP32;
	MPI2_SGE_SIMPLE_UNION	SGE;
} MPI2_SCSI_IO_CDB_UNION;


/* MPI 2.5 SGLs */

#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST        (0x40)

typedef struct _MPI25_IEEE_SGE_CHAIN64 {
	uint64_t	Address;
	uint32_t	Length;
	uint16_t	Reserved1;
	uint8_t		NextChainOffset;
	uint8_t		Flags;
} MPI25_IEEE_SGE_CHAIN64, *pMpi25IeeeSgeChain64_t;

/* use MPI2_IEEE_SGE_FLAGS_ defines for the Flags field */


/********/

/*
 * RAID SCSI IO Request Message
 * Total SGE count will be one less than  _MPI2_SCSI_IO_REQUEST
 */
struct mfi_mpi2_request_raid_scsi_io {
	uint16_t		DevHandle;                      /* 0x00 */
	uint8_t			ChainOffset;                    /* 0x02 */
	uint8_t			Function;                       /* 0x03 */
	uint16_t		Reserved1;                      /* 0x04 */
	uint8_t			Reserved2;                      /* 0x06 */
	uint8_t			MsgFlags;                       /* 0x07 */
	uint8_t			VP_ID;                          /* 0x08 */
	uint8_t			VF_ID;                          /* 0x09 */
	uint16_t		Reserved3;                      /* 0x0A */
	uint32_t		SenseBufferLowAddress;          /* 0x0C */
	uint16_t		SGLFlags;                       /* 0x10 */
	uint8_t			SenseBufferLength;              /* 0x12 */
	uint8_t			Reserved4;                      /* 0x13 */
	uint8_t			SGLOffset0;                     /* 0x14 */
	uint8_t			SGLOffset1;                     /* 0x15 */
	uint8_t			SGLOffset2;                     /* 0x16 */
	uint8_t			SGLOffset3;                     /* 0x17 */
	uint32_t		SkipCount;                      /* 0x18 */
	uint32_t		DataLength;                     /* 0x1C */
	uint32_t		BidirectionalDataLength;        /* 0x20 */
	uint16_t		IoFlags;                        /* 0x24 */
	uint16_t		EEDPFlags;                      /* 0x26 */
	uint32_t		EEDPBlockSize;                  /* 0x28 */
	uint32_t		SecondaryReferenceTag;          /* 0x2C */
	uint16_t		SecondaryApplicationTag;        /* 0x30 */
	uint16_t		ApplicationTagTranslationMask;  /* 0x32 */
	uint8_t			LUN[8];                         /* 0x34 */
	uint32_t		Control;                        /* 0x3C */
	MPI2_SCSI_IO_CDB_UNION	CDB;                            /* 0x40 */
	MPI2_SCSI_IO_VENDOR_UNIQUE	RaidContext;              /* 0x60 */
	MPI2_SGE_IO_UNION	SGL;                            /* 0x80 */
} __packed;

/*
 * MPT RAID MFA IO Descriptor.
 */
typedef struct _MFI_RAID_MFA_IO_DESCRIPTOR {
	uint32_t	RequestFlags : 8;
	uint32_t	MessageAddress1 : 24; /* bits 31:8*/
	uint32_t	MessageAddress2;      /* bits 61:32 */
} MFI_RAID_MFA_IO_REQUEST_DESCRIPTOR,*PMFI_RAID_MFA_IO_REQUEST_DESCRIPTOR;

struct mfi_mpi2_request_header {
	uint8_t		RequestFlags;       /* 0x00 */
	uint8_t		MSIxIndex;          /* 0x01 */
	uint16_t	SMID;               /* 0x02 */
	uint16_t	LMID;               /* 0x04 */
};

/* defines for the RequestFlags field */
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK               (0x0E)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET             (0x02)
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE            (0x08)
#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR        (0x0A)

#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)

struct mfi_mpi2_request_high_priority {
	struct mfi_mpi2_request_header	header;
	uint16_t			reserved;
};

struct mfi_mpi2_request_scsi_io {
	struct mfi_mpi2_request_header	header;
	uint16_t			scsi_io_dev_handle;
};

struct mfi_mpi2_request_scsi_target {
	struct mfi_mpi2_request_header	header;
	uint16_t			scsi_target_io_index;
};

/* Request Descriptors */
union mfi_mpi2_request_descriptor {
	struct mfi_mpi2_request_header		header;
	struct mfi_mpi2_request_high_priority	high_priority;
	struct mfi_mpi2_request_scsi_io		scsi_io;
	struct mfi_mpi2_request_scsi_target	scsi_target;
	uint64_t				words;
};


struct mfi_mpi2_reply_header {
	uint8_t		ReplyFlags;                 /* 0x00 */
	uint8_t		MSIxIndex;                  /* 0x01 */
	uint16_t	SMID;                       /* 0x02 */
};

/* defines for the ReplyFlags field */
#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK                   (0x0F)
#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS             (0x00)
#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY               (0x01)
#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS        (0x02)
#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER       (0x03)
#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS    (0x05)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED                      (0x0F)

/* values for marking a reply descriptor as unused */
#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK             (0xFFFFFFFF)
#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK             (0xFFFFFFFF)

struct mfi_mpi2_reply_default {
	struct mfi_mpi2_reply_header	header;
	uint32_t			DescriptorTypeDependent2;
};

struct mfi_mpi2_reply_address {
	struct mfi_mpi2_reply_header	header;
	uint32_t			ReplyFrameAddress;
};

struct mfi_mpi2_reply_scsi_io {
	struct mfi_mpi2_reply_header	header;
	uint16_t			TaskTag;		/* 0x04 */
	uint16_t			Reserved1;		/* 0x06 */
};

struct mfi_mpi2_reply_target_assist {
	struct mfi_mpi2_reply_header	header;
	uint8_t				SequenceNumber;		/* 0x04 */
	uint8_t				Reserved1;		/* 0x04 */
	uint16_t			IoIndex;		/* 0x06 */
};

struct mfi_mpi2_reply_target_cmd_buffer {
	struct mfi_mpi2_reply_header	header;
	uint8_t				SequenceNumber;		/* 0x04 */
	uint8_t				Flags;			/* 0x04 */
	uint16_t			InitiatorDevHandle;	/* 0x06 */
	uint16_t			IoIndex;		/* 0x06 */
};

struct mfi_mpi2_reply_raid_accel {
	struct mfi_mpi2_reply_header	header;
	uint8_t				SequenceNumber;		/* 0x04 */
	uint32_t			Reserved;		/* 0x04 */
};

/* union of Reply Descriptors */
union mfi_mpi2_reply_descriptor {
	struct mfi_mpi2_reply_header		header;
	struct mfi_mpi2_reply_scsi_io		scsi_io;
	struct mfi_mpi2_reply_target_assist	target_assist;
	struct mfi_mpi2_reply_target_cmd_buffer	target_cmd;
	struct mfi_mpi2_reply_raid_accel	raid_accel;
	struct mfi_mpi2_reply_default		reply_default;
	uint64_t				words;
};

struct IO_REQUEST_INFO {
	uint64_t	ldStartBlock;
	uint32_t	numBlocks;
	uint16_t	ldTgtId;
	uint8_t		isRead;
	uint16_t	devHandle;
	uint64_t	pdBlock;
	uint8_t		fpOkForIo;
};

#define MFI_SCSI_MAX_TARGETS	128
#define MFI_SCSI_MAX_LUNS	8
#define MFI_SCSI_INITIATOR_ID	255
#define MFI_SCSI_MAX_CMDS	8
#define MFI_SCSI_MAX_CDB_LEN	16

#endif /* _MFIREG_H */