1 /*- 2 * Copyright (c) 2007 Marvell Semiconductor, Inc. 3 * Copyright (c) 2007 Sam Leffler, Errno Consulting 4 * Copyright (c) 2008 Weongyo Jeong <weongyo@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 14 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 15 * redistribution must be conditioned upon including a substantially 16 * similar Disclaimer requirement for further binary redistribution. 17 * 18 * NO WARRANTY 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 22 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 23 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 24 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 27 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29 * THE POSSIBILITY OF SUCH DAMAGES. 30 */ 31 32 #include <sys/cdefs.h> 33 #ifdef __FreeBSD__ 34 __FBSDID("$FreeBSD$"); 35 #endif 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/endian.h> 40 #include <sys/kernel.h> 41 #include <sys/firmware.h> 42 #include <sys/socket.h> 43 44 #include <machine/bus.h> 45 #include <sys/bus.h> 46 47 #include <net/if.h> 48 #include <net/if_dl.h> 49 #include <net/if_media.h> 50 51 #include <net80211/ieee80211_var.h> 52 53 #include <dev/malo/if_malo.h> 54 55 #define MALO_WAITOK 1 56 #define MALO_NOWAIT 0 57 58 #define _CMD_SETUP(pCmd, _type, _cmd) do { \ 59 pCmd = (_type *)&mh->mh_cmdbuf[0]; \ 60 memset(pCmd, 0, sizeof(_type)); \ 61 pCmd->cmdhdr.cmd = htole16(_cmd); \ 62 pCmd->cmdhdr.length = htole16(sizeof(_type)); \ 63 } while (0) 64 65 static __inline uint32_t 66 malo_hal_read4(struct malo_hal *mh, bus_size_t off) 67 { 68 return bus_space_read_4(mh->mh_iot, mh->mh_ioh, off); 69 } 70 71 static __inline void 72 malo_hal_write4(struct malo_hal *mh, bus_size_t off, uint32_t val) 73 { 74 bus_space_write_4(mh->mh_iot, mh->mh_ioh, off, val); 75 } 76 77 static void 78 malo_hal_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 79 { 80 bus_addr_t *paddr = (bus_addr_t*) arg; 81 82 KASSERT(error == 0, ("error %u on bus_dma callback", error)); 83 *paddr = segs->ds_addr; 84 } 85 86 /* 87 * Setup for communication with the device. We allocate 88 * a command buffer and map it for bus dma use. The pci 89 * device id is used to identify whether the device has 90 * SRAM on it (in which case f/w download must include a 91 * memory controller reset). All bus i/o operations happen 92 * in BAR 1; the driver passes in the tag and handle we need. 93 */ 94 struct malo_hal * 95 malo_hal_attach(device_t dev, uint16_t devid, 96 bus_space_handle_t ioh, bus_space_tag_t iot, bus_dma_tag_t tag) 97 { 98 int error; 99 struct malo_hal *mh; 100 101 mh = malloc(sizeof(struct malo_hal), M_DEVBUF, M_NOWAIT | M_ZERO); 102 if (mh == NULL) 103 return NULL; 104 105 mh->mh_dev = dev; 106 mh->mh_ioh = ioh; 107 mh->mh_iot = iot; 108 109 snprintf(mh->mh_mtxname, sizeof(mh->mh_mtxname), 110 "%s_hal", device_get_nameunit(dev)); 111 mtx_init(&mh->mh_mtx, mh->mh_mtxname, NULL, MTX_DEF); 112 113 /* 114 * Allocate the command buffer and map into the address 115 * space of the h/w. We request "coherent" memory which 116 * will be uncached on some architectures. 117 */ 118 error = bus_dma_tag_create(tag, /* parent */ 119 PAGE_SIZE, 0, /* alignment, bounds */ 120 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 121 BUS_SPACE_MAXADDR, /* highaddr */ 122 NULL, NULL, /* filter, filterarg */ 123 MALO_CMDBUF_SIZE, /* maxsize */ 124 1, /* nsegments */ 125 MALO_CMDBUF_SIZE, /* maxsegsize */ 126 BUS_DMA_ALLOCNOW, /* flags */ 127 NULL, /* lockfunc */ 128 NULL, /* lockarg */ 129 &mh->mh_dmat); 130 if (error != 0) { 131 device_printf(dev, "unable to allocate memory for cmd tag, " 132 "error %u\n", error); 133 goto fail; 134 } 135 136 /* allocate descriptors */ 137 error = bus_dmamap_create(mh->mh_dmat, BUS_DMA_NOWAIT, &mh->mh_dmamap); 138 if (error != 0) { 139 device_printf(dev, "unable to create dmamap for cmd buffers, " 140 "error %u\n", error); 141 goto fail; 142 } 143 144 error = bus_dmamem_alloc(mh->mh_dmat, (void**) &mh->mh_cmdbuf, 145 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, 146 &mh->mh_dmamap); 147 if (error != 0) { 148 device_printf(dev, "unable to allocate memory for cmd buffer, " 149 "error %u\n", error); 150 goto fail; 151 } 152 153 error = bus_dmamap_load(mh->mh_dmat, mh->mh_dmamap, 154 mh->mh_cmdbuf, MALO_CMDBUF_SIZE, 155 malo_hal_load_cb, &mh->mh_cmdaddr, 156 BUS_DMA_NOWAIT); 157 if (error != 0) { 158 device_printf(dev, "unable to load cmd buffer, error %u\n", 159 error); 160 goto fail; 161 } 162 163 return (mh); 164 165 fail: 166 if (mh->mh_dmamap != NULL) { 167 bus_dmamap_unload(mh->mh_dmat, mh->mh_dmamap); 168 if (mh->mh_cmdbuf != NULL) 169 bus_dmamem_free(mh->mh_dmat, mh->mh_cmdbuf, 170 mh->mh_dmamap); 171 bus_dmamap_destroy(mh->mh_dmat, mh->mh_dmamap); 172 } 173 if (mh->mh_dmat) 174 bus_dma_tag_destroy(mh->mh_dmat); 175 free(mh, M_DEVBUF); 176 177 return (NULL); 178 } 179 180 /* 181 * Low level firmware cmd block handshake support. 182 */ 183 184 static void 185 malo_hal_send_cmd(struct malo_hal *mh) 186 { 187 uint32_t dummy; 188 189 bus_dmamap_sync(mh->mh_dmat, mh->mh_dmamap, 190 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 191 192 malo_hal_write4(mh, MALO_REG_GEN_PTR, mh->mh_cmdaddr); 193 dummy = malo_hal_read4(mh, MALO_REG_INT_CODE); 194 195 malo_hal_write4(mh, MALO_REG_H2A_INTERRUPT_EVENTS, 196 MALO_H2ARIC_BIT_DOOR_BELL); 197 } 198 199 static int 200 malo_hal_waitforcmd(struct malo_hal *mh, uint16_t cmd) 201 { 202 #define MAX_WAIT_FW_COMPLETE_ITERATIONS 10000 203 int i; 204 205 for (i = 0; i < MAX_WAIT_FW_COMPLETE_ITERATIONS; i++) { 206 if (mh->mh_cmdbuf[0] == le16toh(cmd)) 207 return 1; 208 209 DELAY(1 * 1000); 210 } 211 212 return 0; 213 #undef MAX_WAIT_FW_COMPLETE_ITERATIONS 214 } 215 216 static int 217 malo_hal_execute_cmd(struct malo_hal *mh, unsigned short cmd) 218 { 219 MALO_HAL_LOCK_ASSERT(mh); 220 221 if ((mh->mh_flags & MHF_FWHANG) && 222 (mh->mh_debug & MALO_HAL_DEBUG_IGNHANG) == 0) { 223 device_printf(mh->mh_dev, "firmware hung, skipping cmd 0x%x\n", 224 cmd); 225 return ENXIO; 226 } 227 228 if (malo_hal_read4(mh, MALO_REG_INT_CODE) == 0xffffffff) { 229 device_printf(mh->mh_dev, "%s: device not present!\n", 230 __func__); 231 return EIO; 232 } 233 234 malo_hal_send_cmd(mh); 235 if (!malo_hal_waitforcmd(mh, cmd | 0x8000)) { 236 device_printf(mh->mh_dev, 237 "timeout waiting for f/w cmd 0x%x\n", cmd); 238 mh->mh_flags |= MHF_FWHANG; 239 return ETIMEDOUT; 240 } 241 242 bus_dmamap_sync(mh->mh_dmat, mh->mh_dmamap, 243 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 244 245 return 0; 246 } 247 248 static int 249 malo_hal_get_cal_table(struct malo_hal *mh, uint8_t annex, uint8_t index) 250 { 251 struct malo_cmd_caltable *cmd; 252 int ret; 253 254 MALO_HAL_LOCK_ASSERT(mh); 255 256 _CMD_SETUP(cmd, struct malo_cmd_caltable, MALO_HOSTCMD_GET_CALTABLE); 257 cmd->annex = annex; 258 cmd->index = index; 259 260 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_GET_CALTABLE); 261 if (ret == 0 && cmd->caltbl[0] != annex && annex != 0 && annex != 255) 262 ret = EIO; 263 return ret; 264 } 265 266 static int 267 malo_hal_get_pwrcal_table(struct malo_hal *mh, struct malo_hal_caldata *cal) 268 { 269 const uint8_t *data; 270 int len; 271 272 MALO_HAL_LOCK(mh); 273 /* NB: we hold the lock so it's ok to use cmdbuf */ 274 data = ((const struct malo_cmd_caltable *) mh->mh_cmdbuf)->caltbl; 275 if (malo_hal_get_cal_table(mh, 33, 0) == 0) { 276 len = (data[2] | (data[3] << 8)) - 12; 277 /* XXX validate len */ 278 memcpy(cal->pt_ratetable_20m, &data[12], len); 279 } 280 mh->mh_flags |= MHF_CALDATA; 281 MALO_HAL_UNLOCK(mh); 282 283 return 0; 284 } 285 286 /* 287 * Reset internal state after a firmware download. 288 */ 289 static int 290 malo_hal_resetstate(struct malo_hal *mh) 291 { 292 /* 293 * Fetch cal data for later use. 294 * XXX may want to fetch other stuff too. 295 */ 296 if ((mh->mh_flags & MHF_CALDATA) == 0) 297 malo_hal_get_pwrcal_table(mh, &mh->mh_caldata); 298 return 0; 299 } 300 301 static void 302 malo_hal_fw_reset(struct malo_hal *mh) 303 { 304 305 if (malo_hal_read4(mh, MALO_REG_INT_CODE) == 0xffffffff) { 306 device_printf(mh->mh_dev, "%s: device not present!\n", 307 __func__); 308 return; 309 } 310 311 malo_hal_write4(mh, MALO_REG_H2A_INTERRUPT_EVENTS, MALO_ISR_RESET); 312 mh->mh_flags &= ~MHF_FWHANG; 313 } 314 315 static void 316 malo_hal_trigger_pcicmd(struct malo_hal *mh) 317 { 318 uint32_t dummy; 319 320 bus_dmamap_sync(mh->mh_dmat, mh->mh_dmamap, BUS_DMASYNC_PREWRITE); 321 322 malo_hal_write4(mh, MALO_REG_GEN_PTR, mh->mh_cmdaddr); 323 dummy = malo_hal_read4(mh, MALO_REG_INT_CODE); 324 325 malo_hal_write4(mh, MALO_REG_INT_CODE, 0x00); 326 dummy = malo_hal_read4(mh, MALO_REG_INT_CODE); 327 328 malo_hal_write4(mh, MALO_REG_H2A_INTERRUPT_EVENTS, 329 MALO_H2ARIC_BIT_DOOR_BELL); 330 dummy = malo_hal_read4(mh, MALO_REG_INT_CODE); 331 } 332 333 static int 334 malo_hal_waitfor(struct malo_hal *mh, uint32_t val) 335 { 336 int i; 337 338 for (i = 0; i < MALO_FW_MAX_NUM_CHECKS; i++) { 339 DELAY(MALO_FW_CHECK_USECS); 340 if (malo_hal_read4(mh, MALO_REG_INT_CODE) == val) 341 return 0; 342 } 343 344 return -1; 345 } 346 347 /* 348 * Firmware block xmit when talking to the boot-rom. 349 */ 350 static int 351 malo_hal_send_helper(struct malo_hal *mh, int bsize, 352 const void *data, size_t dsize, int waitfor) 353 { 354 mh->mh_cmdbuf[0] = htole16(MALO_HOSTCMD_CODE_DNLD); 355 mh->mh_cmdbuf[1] = htole16(bsize); 356 memcpy(&mh->mh_cmdbuf[4], data , dsize); 357 358 malo_hal_trigger_pcicmd(mh); 359 360 if (waitfor == MALO_NOWAIT) 361 goto pass; 362 363 /* XXX 2000 vs 200 */ 364 if (malo_hal_waitfor(mh, MALO_INT_CODE_CMD_FINISHED) != 0) { 365 device_printf(mh->mh_dev, 366 "%s: timeout waiting for CMD_FINISHED, INT_CODE 0x%x\n", 367 __func__, malo_hal_read4(mh, MALO_REG_INT_CODE)); 368 369 return ETIMEDOUT; 370 } 371 372 pass: 373 malo_hal_write4(mh, MALO_REG_INT_CODE, 0); 374 375 return (0); 376 } 377 378 static int 379 malo_hal_fwload_helper(struct malo_hal *mh, char *helper) 380 { 381 const struct firmware *fw; 382 int error; 383 384 fw = firmware_get(helper); 385 if (fw == NULL) { 386 device_printf(mh->mh_dev, "could not read microcode %s!\n", 387 helper); 388 return (EIO); 389 } 390 391 device_printf(mh->mh_dev, "load %s firmware image (%zu bytes)\n", 392 helper, fw->datasize); 393 394 error = malo_hal_send_helper(mh, fw->datasize, fw->data, fw->datasize, 395 MALO_WAITOK); 396 if (error != 0) 397 goto fail; 398 399 /* tell the card we're done and... */ 400 error = malo_hal_send_helper(mh, 0, NULL, 0, MALO_NOWAIT); 401 402 fail: 403 firmware_put(fw, FIRMWARE_UNLOAD); 404 405 return (error); 406 } 407 408 /* 409 * Firmware block xmit when talking to the 1st-stage loader. 410 */ 411 static int 412 malo_hal_send_main(struct malo_hal *mh, const void *data, size_t dsize, 413 uint16_t seqnum, int waitfor) 414 { 415 mh->mh_cmdbuf[0] = htole16(MALO_HOSTCMD_CODE_DNLD); 416 mh->mh_cmdbuf[1] = htole16(dsize); 417 mh->mh_cmdbuf[2] = htole16(seqnum); 418 mh->mh_cmdbuf[3] = 0; 419 memcpy(&mh->mh_cmdbuf[4], data, dsize); 420 421 malo_hal_trigger_pcicmd(mh); 422 423 if (waitfor == MALO_NOWAIT) 424 goto pass; 425 426 if (malo_hal_waitfor(mh, MALO_INT_CODE_CMD_FINISHED) != 0) { 427 device_printf(mh->mh_dev, 428 "%s: timeout waiting for CMD_FINISHED, INT_CODE 0x%x\n", 429 __func__, malo_hal_read4(mh, MALO_REG_INT_CODE)); 430 431 return ETIMEDOUT; 432 } 433 434 pass: 435 malo_hal_write4(mh, MALO_REG_INT_CODE, 0); 436 437 return 0; 438 } 439 440 static int 441 malo_hal_fwload_main(struct malo_hal *mh, char *firmware) 442 { 443 const struct firmware *fw; 444 const uint8_t *fp; 445 int error; 446 size_t count; 447 uint16_t seqnum; 448 uint32_t blocksize; 449 450 error = 0; 451 452 fw = firmware_get(firmware); 453 if (fw == NULL) { 454 device_printf(mh->mh_dev, "could not read firmware %s!\n", 455 firmware); 456 return (EIO); 457 } 458 459 device_printf(mh->mh_dev, "load %s firmware image (%zu bytes)\n", 460 firmware, fw->datasize); 461 462 seqnum = 1; 463 for (count = 0; count < fw->datasize; count += blocksize) { 464 blocksize = MIN(256, fw->datasize - count); 465 fp = (const uint8_t *)fw->data + count; 466 467 error = malo_hal_send_main(mh, fp, blocksize, seqnum++, 468 MALO_NOWAIT); 469 if (error != 0) 470 goto fail; 471 DELAY(500); 472 } 473 474 /* 475 * send a command with size 0 to tell that the firmware has been 476 * uploaded 477 */ 478 error = malo_hal_send_main(mh, NULL, 0, seqnum++, MALO_NOWAIT); 479 DELAY(100); 480 481 fail: 482 firmware_put(fw, FIRMWARE_UNLOAD); 483 484 return (error); 485 } 486 487 int 488 malo_hal_fwload(struct malo_hal *mh, char *helper, char *firmware) 489 { 490 int error, i; 491 uint32_t fwreadysig, opmode; 492 493 /* 494 * NB: now malo(4) supports only STA mode. It will be better if it 495 * supports AP mode. 496 */ 497 fwreadysig = MALO_HOSTCMD_STA_FWRDY_SIGNATURE; 498 opmode = MALO_HOSTCMD_STA_MODE; 499 500 malo_hal_fw_reset(mh); 501 502 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_CLEAR_SEL, 503 MALO_A2HRIC_BIT_MASK); 504 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_CAUSE, 0x00); 505 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_MASK, 0x00); 506 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_STATUS_MASK, 507 MALO_A2HRIC_BIT_MASK); 508 509 error = malo_hal_fwload_helper(mh, helper); 510 if (error != 0) { 511 device_printf(mh->mh_dev, "failed to load bootrom loader.\n"); 512 goto fail; 513 } 514 515 DELAY(200 * MALO_FW_CHECK_USECS); 516 517 error = malo_hal_fwload_main(mh, firmware); 518 if (error != 0) { 519 device_printf(mh->mh_dev, "failed to load firmware.\n"); 520 goto fail; 521 } 522 523 /* 524 * Wait for firmware to startup; we monitor the INT_CODE register 525 * waiting for a signature to written back indicating it's ready to go. 526 */ 527 mh->mh_cmdbuf[1] = 0; 528 529 if (opmode != MALO_HOSTCMD_STA_MODE) 530 malo_hal_trigger_pcicmd(mh); 531 532 for (i = 0; i < MALO_FW_MAX_NUM_CHECKS; i++) { 533 malo_hal_write4(mh, MALO_REG_GEN_PTR, opmode); 534 DELAY(MALO_FW_CHECK_USECS); 535 if (malo_hal_read4(mh, MALO_REG_INT_CODE) == fwreadysig) { 536 malo_hal_write4(mh, MALO_REG_INT_CODE, 0x00); 537 return malo_hal_resetstate(mh); 538 } 539 } 540 541 return ETIMEDOUT; 542 fail: 543 malo_hal_fw_reset(mh); 544 545 return (error); 546 } 547 548 /* 549 * Return "hw specs". Note this must be the first cmd MUST be done after 550 * a firmware download or the f/w will lockup. 551 */ 552 int 553 malo_hal_gethwspecs(struct malo_hal *mh, struct malo_hal_hwspec *hw) 554 { 555 struct malo_cmd_get_hwspec *cmd; 556 int ret; 557 558 MALO_HAL_LOCK(mh); 559 560 _CMD_SETUP(cmd, struct malo_cmd_get_hwspec, MALO_HOSTCMD_GET_HW_SPEC); 561 memset(&cmd->permaddr[0], 0xff, IEEE80211_ADDR_LEN); 562 cmd->ul_fw_awakecookie = htole32((unsigned int)mh->mh_cmdaddr + 2048); 563 564 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_GET_HW_SPEC); 565 if (ret == 0) { 566 IEEE80211_ADDR_COPY(hw->macaddr, cmd->permaddr); 567 hw->wcbbase[0] = le32toh(cmd->wcbbase0) & 0x0000ffff; 568 hw->wcbbase[1] = le32toh(cmd->wcbbase1) & 0x0000ffff; 569 hw->wcbbase[2] = le32toh(cmd->wcbbase2) & 0x0000ffff; 570 hw->wcbbase[3] = le32toh(cmd->wcbbase3) & 0x0000ffff; 571 hw->rxdesc_read = le32toh(cmd->rxpdrd_ptr)& 0x0000ffff; 572 hw->rxdesc_write = le32toh(cmd->rxpdwr_ptr)& 0x0000ffff; 573 hw->regioncode = le16toh(cmd->regioncode) & 0x00ff; 574 hw->fw_releasenum = le32toh(cmd->fw_releasenum); 575 hw->maxnum_wcb = le16toh(cmd->num_wcb); 576 hw->maxnum_mcaddr = le16toh(cmd->num_mcastaddr); 577 hw->num_antenna = le16toh(cmd->num_antenna); 578 hw->hwversion = cmd->version; 579 hw->hostinterface = cmd->hostif; 580 } 581 582 MALO_HAL_UNLOCK(mh); 583 584 return ret; 585 } 586 587 void 588 malo_hal_detach(struct malo_hal *mh) 589 { 590 591 bus_dmamem_free(mh->mh_dmat, mh->mh_cmdbuf, mh->mh_dmamap); 592 bus_dmamap_destroy(mh->mh_dmat, mh->mh_dmamap); 593 bus_dma_tag_destroy(mh->mh_dmat); 594 mtx_destroy(&mh->mh_mtx); 595 free(mh, M_DEVBUF); 596 } 597 598 /* 599 * Configure antenna use. Takes effect immediately. 600 * 601 * XXX tx antenna setting ignored 602 * XXX rx antenna setting should always be 3 (for now) 603 */ 604 int 605 malo_hal_setantenna(struct malo_hal *mh, enum malo_hal_antenna dirset, int ant) 606 { 607 struct malo_cmd_rf_antenna *cmd; 608 int ret; 609 610 if (!(dirset == MHA_ANTENNATYPE_RX || dirset == MHA_ANTENNATYPE_TX)) 611 return EINVAL; 612 613 MALO_HAL_LOCK(mh); 614 615 _CMD_SETUP(cmd, struct malo_cmd_rf_antenna, 616 MALO_HOSTCMD_802_11_RF_ANTENNA); 617 cmd->action = htole16(dirset); 618 if (ant == 0) { /* default to all/both antennae */ 619 /* XXX never reach now. */ 620 ant = 3; 621 } 622 cmd->mode = htole16(ant); 623 624 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_802_11_RF_ANTENNA); 625 626 MALO_HAL_UNLOCK(mh); 627 628 return ret; 629 } 630 631 /* 632 * Configure radio. Takes effect immediately. 633 * 634 * XXX preamble installed after set fixed rate cmd 635 */ 636 int 637 malo_hal_setradio(struct malo_hal *mh, int onoff, 638 enum malo_hal_preamble preamble) 639 { 640 struct malo_cmd_radio_control *cmd; 641 int ret; 642 643 MALO_HAL_LOCK(mh); 644 645 _CMD_SETUP(cmd, struct malo_cmd_radio_control, 646 MALO_HOSTCMD_802_11_RADIO_CONTROL); 647 cmd->action = htole16(MALO_HOSTCMD_ACT_GEN_SET); 648 if (onoff == 0) 649 cmd->control = 0; 650 else 651 cmd->control = htole16(preamble); 652 cmd->radio_on = htole16(onoff); 653 654 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_802_11_RADIO_CONTROL); 655 656 MALO_HAL_UNLOCK(mh); 657 658 return ret; 659 } 660 661 /* 662 * Set the interrupt mask. 663 */ 664 void 665 malo_hal_intrset(struct malo_hal *mh, uint32_t mask) 666 { 667 668 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_MASK, 0); 669 (void)malo_hal_read4(mh, MALO_REG_INT_CODE); 670 671 mh->mh_imask = mask; 672 malo_hal_write4(mh, MALO_REG_A2H_INTERRUPT_MASK, mask); 673 (void)malo_hal_read4(mh, MALO_REG_INT_CODE); 674 } 675 676 int 677 malo_hal_setchannel(struct malo_hal *mh, const struct malo_hal_channel *chan) 678 { 679 struct malo_cmd_fw_set_rf_channel *cmd; 680 int ret; 681 682 MALO_HAL_LOCK(mh); 683 684 _CMD_SETUP(cmd, struct malo_cmd_fw_set_rf_channel, 685 MALO_HOSTCMD_SET_RF_CHANNEL); 686 cmd->action = htole16(MALO_HOSTCMD_ACT_GEN_SET); 687 cmd->cur_channel = chan->channel; 688 689 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_RF_CHANNEL); 690 691 MALO_HAL_UNLOCK(mh); 692 693 return ret; 694 } 695 696 int 697 malo_hal_settxpower(struct malo_hal *mh, const struct malo_hal_channel *c) 698 { 699 struct malo_cmd_rf_tx_power *cmd; 700 const struct malo_hal_caldata *cal = &mh->mh_caldata; 701 uint8_t chan = c->channel; 702 uint16_t pow; 703 int i, idx, ret; 704 705 MALO_HAL_LOCK(mh); 706 707 _CMD_SETUP(cmd, struct malo_cmd_rf_tx_power, 708 MALO_HOSTCMD_802_11_RF_TX_POWER); 709 cmd->action = htole16(MALO_HOSTCMD_ACT_GEN_SET_LIST); 710 for (i = 0; i < 4; i++) { 711 idx = (chan - 1) * 4 + i; 712 pow = cal->pt_ratetable_20m[idx]; 713 cmd->power_levellist[i] = htole16(pow); 714 } 715 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_802_11_RF_TX_POWER); 716 717 MALO_HAL_UNLOCK(mh); 718 719 return ret; 720 } 721 722 int 723 malo_hal_setpromisc(struct malo_hal *mh, int enable) 724 { 725 /* XXX need host cmd */ 726 return 0; 727 } 728 729 int 730 malo_hal_setassocid(struct malo_hal *mh, 731 const uint8_t bssid[IEEE80211_ADDR_LEN], uint16_t associd) 732 { 733 struct malo_cmd_fw_set_aid *cmd; 734 int ret; 735 736 MALO_HAL_LOCK(mh); 737 738 _CMD_SETUP(cmd, struct malo_cmd_fw_set_aid, 739 MALO_HOSTCMD_SET_AID); 740 cmd->cmdhdr.seqnum = 1; 741 cmd->associd = htole16(associd); 742 IEEE80211_ADDR_COPY(&cmd->macaddr[0], bssid); 743 744 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_AID); 745 MALO_HAL_UNLOCK(mh); 746 return ret; 747 } 748 749 /* 750 * Kick the firmware to tell it there are new tx descriptors 751 * for processing. The driver says what h/w q has work in 752 * case the f/w ever gets smarter. 753 */ 754 void 755 malo_hal_txstart(struct malo_hal *mh, int qnum) 756 { 757 bus_space_write_4(mh->mh_iot, mh->mh_ioh, 758 MALO_REG_H2A_INTERRUPT_EVENTS, MALO_H2ARIC_BIT_PPA_READY); 759 (void) bus_space_read_4(mh->mh_iot, mh->mh_ioh, MALO_REG_INT_CODE); 760 } 761 762 /* 763 * Return the current ISR setting and clear the cause. 764 */ 765 void 766 malo_hal_getisr(struct malo_hal *mh, uint32_t *status) 767 { 768 uint32_t cause; 769 770 cause = bus_space_read_4(mh->mh_iot, mh->mh_ioh, 771 MALO_REG_A2H_INTERRUPT_CAUSE); 772 if (cause == 0xffffffff) { /* card removed */ 773 cause = 0; 774 } else if (cause != 0) { 775 /* clear cause bits */ 776 bus_space_write_4(mh->mh_iot, mh->mh_ioh, 777 MALO_REG_A2H_INTERRUPT_CAUSE, cause &~ mh->mh_imask); 778 (void) bus_space_read_4(mh->mh_iot, mh->mh_ioh, 779 MALO_REG_INT_CODE); 780 cause &= mh->mh_imask; 781 } 782 783 *status = cause; 784 } 785 786 /* 787 * Callback from the driver on a cmd done interrupt. Nothing to do right 788 * now as we spin waiting for cmd completion. 789 */ 790 void 791 malo_hal_cmddone(struct malo_hal *mh) 792 { 793 /* NB : do nothing. */ 794 } 795 796 int 797 malo_hal_prescan(struct malo_hal *mh) 798 { 799 struct malo_cmd_prescan *cmd; 800 int ret; 801 802 MALO_HAL_LOCK(mh); 803 804 _CMD_SETUP(cmd, struct malo_cmd_prescan, MALO_HOSTCMD_SET_PRE_SCAN); 805 cmd->cmdhdr.seqnum = 1; 806 807 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_PRE_SCAN); 808 809 MALO_HAL_UNLOCK(mh); 810 811 return ret; 812 } 813 814 int 815 malo_hal_postscan(struct malo_hal *mh, uint8_t *macaddr, uint8_t ibsson) 816 { 817 struct malo_cmd_postscan *cmd; 818 int ret; 819 820 MALO_HAL_LOCK(mh); 821 822 _CMD_SETUP(cmd, struct malo_cmd_postscan, MALO_HOSTCMD_SET_POST_SCAN); 823 cmd->cmdhdr.seqnum = 1; 824 cmd->isibss = htole32(ibsson); 825 IEEE80211_ADDR_COPY(&cmd->bssid[0], macaddr); 826 827 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_POST_SCAN); 828 829 MALO_HAL_UNLOCK(mh); 830 831 return ret; 832 } 833 834 int 835 malo_hal_set_slot(struct malo_hal *mh, int is_short) 836 { 837 int ret; 838 struct malo_cmd_fw_setslot *cmd; 839 840 MALO_HAL_LOCK(mh); 841 842 _CMD_SETUP(cmd, struct malo_cmd_fw_setslot, MALO_HOSTCMD_SET_SLOT); 843 cmd->action = htole16(MALO_HOSTCMD_ACT_GEN_SET); 844 cmd->slot = (is_short == 1 ? 1 : 0); 845 846 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_SLOT); 847 848 MALO_HAL_UNLOCK(mh); 849 850 return ret; 851 } 852 853 int 854 malo_hal_set_rate(struct malo_hal *mh, uint16_t curmode, uint8_t rate) 855 { 856 int i, ret; 857 struct malo_cmd_set_rate *cmd; 858 859 MALO_HAL_LOCK(mh); 860 861 _CMD_SETUP(cmd, struct malo_cmd_set_rate, MALO_HOSTCMD_SET_RATE); 862 cmd->aprates[0] = 2; 863 cmd->aprates[1] = 4; 864 cmd->aprates[2] = 11; 865 cmd->aprates[3] = 22; 866 if (curmode == IEEE80211_MODE_11G) { 867 cmd->aprates[4] = 0; /* XXX reserved? */ 868 cmd->aprates[5] = 12; 869 cmd->aprates[6] = 18; 870 cmd->aprates[7] = 24; 871 cmd->aprates[8] = 36; 872 cmd->aprates[9] = 48; 873 cmd->aprates[10] = 72; 874 cmd->aprates[11] = 96; 875 cmd->aprates[12] = 108; 876 } 877 878 if (rate != 0) { 879 /* fixed rate */ 880 for (i = 0; i < 13; i++) { 881 if (cmd->aprates[i] == rate) { 882 cmd->rateindex = i; 883 cmd->dataratetype = 1; 884 break; 885 } 886 } 887 } 888 889 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_SET_RATE); 890 891 MALO_HAL_UNLOCK(mh); 892 893 return ret; 894 } 895 896 int 897 malo_hal_setmcast(struct malo_hal *mh, int nmc, const uint8_t macs[]) 898 { 899 struct malo_cmd_mcast *cmd; 900 int ret; 901 902 if (nmc > MALO_HAL_MCAST_MAX) 903 return EINVAL; 904 905 MALO_HAL_LOCK(mh); 906 907 _CMD_SETUP(cmd, struct malo_cmd_mcast, MALO_HOSTCMD_MAC_MULTICAST_ADR); 908 memcpy(cmd->maclist, macs, nmc * IEEE80211_ADDR_LEN); 909 cmd->numaddr = htole16(nmc); 910 cmd->action = htole16(0xffff); 911 912 ret = malo_hal_execute_cmd(mh, MALO_HOSTCMD_MAC_MULTICAST_ADR); 913 914 MALO_HAL_UNLOCK(mh); 915 916 return ret; 917 } 918