xref: /freebsd/sys/dev/liquidio/base/lio_iq.h (revision 2e3507c25e42292b45a5482e116d278f5515d04d)
1 /*
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2017 Cavium, Inc.. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Cavium, Inc. nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 /*   \file  lio_iq.h
35  *   \brief Host Driver: Implementation of Octeon input queues. "Input" is
36  *   with respect to the Octeon device on the NIC. From this driver's
37  *   point of view they are egress queues.
38  */
39 
40 #ifndef __LIO_IQ_H__
41 #define __LIO_IQ_H__
42 
43 #define LIO_IQ_SEND_OK          0
44 #define LIO_IQ_SEND_STOP        1
45 #define LIO_IQ_SEND_FAILED     -1
46 
47 /*-------------------------  INSTRUCTION QUEUE --------------------------*/
48 
49 #define LIO_REQTYPE_NONE                 0
50 #define LIO_REQTYPE_NORESP_NET           1
51 #define LIO_REQTYPE_NORESP_NET_SG        2
52 #define LIO_REQTYPE_RESP_NET             3
53 #define LIO_REQTYPE_SOFT_COMMAND         4
54 
55 /*
56  * This structure is used by NIC driver to store information required
57  * to free the mbuf when the packet has been fetched by Octeon.
58  * Bytes offset below assume worst-case of a 64-bit system.
59  */
60 struct lio_mbuf_free_info {
61 	/* Pointer to mbuf. */
62 	struct mbuf		*mb;
63 
64 	/* Pointer to gather list. */
65 	struct lio_gather	*g;
66 
67 	bus_dmamap_t		map;
68 };
69 
70 struct lio_request_list {
71 	uint32_t			reqtype;
72 	void				*buf;
73 	bus_dmamap_t			map;
74 	struct lio_mbuf_free_info	finfo;
75 };
76 
77 /* Input Queue statistics. Each input queue has four stats fields. */
78 struct lio_iq_stats {
79 	uint64_t	instr_posted;		/**< Instructions posted to this queue. */
80 	uint64_t	instr_processed;	/**< Instructions processed in this queue. */
81 	uint64_t	instr_dropped;		/**< Instructions that could not be processed */
82 	uint64_t	bytes_sent;		/**< Bytes sent through this queue. */
83 	uint64_t	sgentry_sent;		/**< Gather entries sent through this queue. */
84 	uint64_t	tx_done;		/**< Num of packets sent to network. */
85 	uint64_t	tx_iq_busy;		/**< Numof times this iq was found to be full. */
86 	uint64_t	tx_dropped;		/**< Numof pkts dropped dueto xmitpath errors. */
87 	uint64_t	tx_tot_bytes;		/**< Total count of bytes sento to network. */
88 	uint64_t	tx_gso;			/* count of tso */
89 	uint64_t	tx_vxlan;		/* tunnel */
90 	uint64_t	tx_dmamap_fail;
91 	uint64_t	tx_restart;
92 	uint64_t	mbuf_defrag_failed;
93 };
94 
95 /*
96  *  The instruction (input) queue.
97  *  The input queue is used to post raw (instruction) mode data or packet
98  *  data to Octeon device from the host. Each input queue for
99  *  a Octeon device has one such structure to represent it.
100  */
101 struct lio_instr_queue {
102 	struct octeon_device	*oct_dev;
103 
104 	/* A lock to protect access to the input ring.  */
105 	struct mtx		lock;
106 
107 	/* A lock to protect while enqueue to the input ring.  */
108 	struct mtx		enq_lock;
109 
110 	/* A lock to protect while posting on the ring.  */
111 	struct mtx		post_lock;
112 
113 	uint32_t		pkt_in_done;
114 
115 	/* A lock to protect access to the input ring. */
116 	struct mtx		iq_flush_running_lock;
117 
118 	/* Flag that indicates if the queue uses 64 byte commands. */
119 	uint32_t		iqcmd_64B:1;
120 
121 	/* Queue info. */
122 	union octeon_txpciq	txpciq;
123 
124 	uint32_t		rsvd:17;
125 
126 	uint32_t		status:8;
127 
128 	/* Maximum no. of instructions in this queue. */
129 	uint32_t		max_count;
130 
131 	/* Index in input ring where the driver should write the next packet */
132 	uint32_t		host_write_index;
133 
134 	/*
135 	 * Index in input ring where Octeon is expected to read the next
136 	 * packet.
137 	 */
138 	uint32_t		octeon_read_index;
139 
140 	/*
141 	 * This index aids in finding the window in the queue where Octeon
142 	 * has read the commands.
143 	 */
144 	uint32_t		flush_index;
145 
146 	/* This field keeps track of the instructions pending in this queue. */
147 	volatile int		instr_pending;
148 
149 	uint32_t		reset_instr_cnt;
150 
151 	/* Pointer to the Virtual Base addr of the input ring. */
152 	uint8_t			*base_addr;
153 	bus_dma_tag_t		txtag;
154 
155 	struct lio_request_list	*request_list;
156 
157 	struct buf_ring		*br;
158 
159 	/* Octeon doorbell register for the ring. */
160 	uint32_t		doorbell_reg;
161 
162 	/* Octeon instruction count register for this ring. */
163 	uint32_t		inst_cnt_reg;
164 
165 	/* Number of instructions pending to be posted to Octeon. */
166 	uint32_t		fill_cnt;
167 
168 	/* The last time that the doorbell was rung. */
169 	uint64_t		last_db_time;
170 
171 	/*
172 	 * The doorbell timeout. If the doorbell was not rung for this time
173 	 * and fill_cnt is non-zero, ring the doorbell again.
174 	 */
175 	uint32_t		db_timeout;
176 
177 	/* Statistics for this input queue. */
178 	struct lio_iq_stats	stats;
179 
180 	/* DMA mapped base address of the input descriptor ring. */
181 	uint64_t		base_addr_dma;
182 
183 	/* Application context */
184 	void			*app_ctx;
185 
186 	/* network stack queue index */
187 	int			q_index;
188 
189 	/* os ifidx associated with this queue */
190 	int			ifidx;
191 
192 };
193 
194 /*----------------------  INSTRUCTION FORMAT ----------------------------*/
195 
196 struct lio_instr3_64B {
197 	/* Pointer where the input data is available. */
198 	uint64_t	dptr;
199 
200 	/* Instruction Header. */
201 	uint64_t	ih3;
202 
203 	/* Instruction Header. */
204 	uint64_t	pki_ih3;
205 
206 	/* Input Request Header. */
207 	uint64_t	irh;
208 
209 	/* opcode/subcode specific parameters */
210 	uint64_t	ossp[2];
211 
212 	/* Return Data Parameters */
213 	uint64_t	rdp;
214 
215 	/*
216 	 * Pointer where the response for a RAW mode packet will be written
217 	 * by Octeon.
218 	 */
219 	uint64_t	rptr;
220 
221 };
222 
223 union lio_instr_64B {
224 	struct lio_instr3_64B	cmd3;
225 };
226 
227 /* The size of each buffer in soft command buffer pool */
228 #define LIO_SOFT_COMMAND_BUFFER_SIZE	2048
229 
230 struct lio_soft_command {
231 	/* Soft command buffer info. */
232 	struct lio_stailq_node	node;
233 	uint64_t		dma_addr;
234 	uint32_t		size;
235 
236 	/* Command and return status */
237 	union lio_instr_64B	cmd;
238 
239 #define COMPLETION_WORD_INIT    0xffffffffffffffffULL
240 	uint64_t		*status_word;
241 
242 	/* Data buffer info */
243 	void			*virtdptr;
244 	uint64_t		dmadptr;
245 	uint32_t		datasize;
246 
247 	/* Return buffer info */
248 	void			*virtrptr;
249 	uint64_t		dmarptr;
250 	uint32_t		rdatasize;
251 
252 	/* Context buffer info */
253 	void			*ctxptr;
254 	uint32_t		ctxsize;
255 
256 	/* Time out and callback */
257 	int			wait_time;
258 	int			timeout;
259 	uint32_t		iq_no;
260 	void			(*callback) (struct octeon_device *, uint32_t,
261 					     void *);
262 	void			*callback_arg;
263 };
264 
265 /* Maximum number of buffers to allocate into soft command buffer pool */
266 #define LIO_MAX_SOFT_COMMAND_BUFFERS	256
267 
268 /* Head of a soft command buffer pool. */
269 struct lio_sc_buffer_pool {
270 	/* List structure to add delete pending entries to */
271 	struct lio_stailq_head	head;
272 
273 	/* A lock for this response list */
274 	struct mtx		lock;
275 
276 	volatile uint32_t	alloc_buf_count;
277 };
278 
279 #define LIO_INCR_INSTRQUEUE_PKT_COUNT(octeon_dev_ptr, iq_no, field, count) \
280 		(((octeon_dev_ptr)->instr_queue[iq_no]->stats.field) += count)
281 
282 int	lio_setup_sc_buffer_pool(struct octeon_device *oct);
283 int	lio_free_sc_buffer_pool(struct octeon_device *oct);
284 struct lio_soft_command	*lio_alloc_soft_command(struct octeon_device *oct,
285 						uint32_t datasize,
286 						uint32_t rdatasize,
287 						uint32_t ctxsize);
288 void	lio_free_soft_command(struct octeon_device *oct,
289 			      struct lio_soft_command *sc);
290 
291 /*
292  *  lio_init_instr_queue()
293  *  @param octeon_dev      - pointer to the octeon device structure.
294  *  @param txpciq          - queue to be initialized (0 <= q_no <= 3).
295  *
296  *  Called at driver init time for each input queue. iq_conf has the
297  *  configuration parameters for the queue.
298  *
299  *  @return  Success: 0   Failure: 1
300  */
301 int	lio_init_instr_queue(struct octeon_device *octeon_dev,
302 			     union octeon_txpciq txpciq, uint32_t num_descs);
303 
304 /*
305  *  lio_delete_instr_queue()
306  *  @param octeon_dev      - pointer to the octeon device structure.
307  *  @param iq_no           - queue to be deleted
308  *
309  *  Called at driver unload time for each input queue. Deletes all
310  *  allocated resources for the input queue.
311  *
312  *  @return  Success: 0   Failure: 1
313  */
314 int	lio_delete_instr_queue(struct octeon_device *octeon_dev,
315 			       uint32_t iq_no);
316 
317 int	lio_wait_for_instr_fetch(struct octeon_device *oct);
318 
319 int	lio_process_iq_request_list(struct octeon_device *oct,
320 				    struct lio_instr_queue *iq,
321 				    uint32_t budget);
322 
323 int	lio_send_command(struct octeon_device *oct, uint32_t iq_no,
324 			 uint32_t force_db, void *cmd, void *buf,
325 			 uint32_t datasize, uint32_t reqtype);
326 
327 void	lio_prepare_soft_command(struct octeon_device *oct,
328 				 struct lio_soft_command *sc,
329 				 uint8_t opcode, uint8_t subcode,
330 				 uint32_t irh_ossp, uint64_t ossp0,
331 				 uint64_t ossp1);
332 
333 int	lio_send_soft_command(struct octeon_device *oct,
334 			      struct lio_soft_command *sc);
335 
336 int	lio_setup_iq(struct octeon_device *oct, int ifidx,
337 		     int q_index, union octeon_txpciq iq_no,
338 		     uint32_t num_descs);
339 int	lio_flush_iq(struct octeon_device *oct, struct lio_instr_queue *iq,
340 		     uint32_t budget);
341 #endif	/* __LIO_IQ_H__ */
342