1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice unmodified, this list of conditions, and the following 12 * disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * $FreeBSD$ 30 */ 31 32 #ifndef _IF_JMEVAR_H 33 #define _IF_JMEVAR_H 34 35 #include <sys/queue.h> 36 #include <sys/callout.h> 37 #include <sys/taskqueue.h> 38 39 /* 40 * JMC250 supports up to 1024 descriptors and the number of 41 * descriptors should be multiple of 16. 42 */ 43 #define JME_TX_RING_CNT 384 44 #define JME_RX_RING_CNT 256 45 /* 46 * Tx/Rx descriptor queue base should be 16bytes aligned and 47 * should not cross 4G bytes boundary on the 64bits address 48 * mode. 49 */ 50 #define JME_TX_RING_ALIGN 16 51 #define JME_RX_RING_ALIGN 16 52 #define JME_TSO_MAXSEGSIZE 4096 53 #define JME_TSO_MAXSIZE (65535 + sizeof(struct ether_vlan_header)) 54 #define JME_MAXTXSEGS 35 55 #define JME_RX_BUF_ALIGN sizeof(uint64_t) 56 #define JME_SSB_ALIGN 16 57 58 #define JME_ADDR_LO(x) ((uint64_t) (x) & 0xFFFFFFFF) 59 #define JME_ADDR_HI(x) ((uint64_t) (x) >> 32) 60 61 #define JME_MSI_MESSAGES 8 62 #define JME_MSIX_MESSAGES 8 63 64 /* Water mark to kick reclaiming Tx buffers. */ 65 #define JME_TX_DESC_HIWAT (JME_TX_RING_CNT - (((JME_TX_RING_CNT) * 3) / 10)) 66 67 /* 68 * JMC250 can send 9K jumbo frame on Tx path and can receive 69 * 65535 bytes. 70 */ 71 #define JME_JUMBO_FRAMELEN 9216 72 #define JME_JUMBO_MTU \ 73 (JME_JUMBO_FRAMELEN - sizeof(struct ether_vlan_header) - \ 74 ETHER_HDR_LEN - ETHER_CRC_LEN) 75 #define JME_MAX_MTU \ 76 (ETHER_MAX_LEN + sizeof(struct ether_vlan_header) - \ 77 ETHER_HDR_LEN - ETHER_CRC_LEN) 78 /* 79 * JMC250 can't handle Tx checksum offload/TSO if frame length 80 * is larger than its FIFO size(2K). It's also good idea to not 81 * use jumbo frame if hardware is running at half-duplex media. 82 * Because the jumbo frame may not fit into the Tx FIFO, 83 * collisions make hardware fetch frame from host memory with 84 * DMA again which in turn slows down Tx performance 85 * significantly. 86 */ 87 #define JME_TX_FIFO_SIZE 2000 88 /* 89 * JMC250 has just 4K Rx FIFO. To support jumbo frame that is 90 * larger than 4K bytes in length, Rx FIFO threshold should be 91 * adjusted to minimize Rx FIFO overrun. 92 */ 93 #define JME_RX_FIFO_SIZE 4000 94 95 #define JME_DESC_INC(x, y) ((x) = ((x) + 1) % (y)) 96 97 #define JME_PROC_MIN 10 98 #define JME_PROC_DEFAULT (JME_RX_RING_CNT / 2) 99 #define JME_PROC_MAX (JME_RX_RING_CNT - 1) 100 101 struct jme_txdesc { 102 struct mbuf *tx_m; 103 bus_dmamap_t tx_dmamap; 104 int tx_ndesc; 105 struct jme_desc *tx_desc; 106 }; 107 108 struct jme_rxdesc { 109 struct mbuf *rx_m; 110 bus_dmamap_t rx_dmamap; 111 struct jme_desc *rx_desc; 112 }; 113 114 struct jme_chain_data{ 115 bus_dma_tag_t jme_ring_tag; 116 bus_dma_tag_t jme_buffer_tag; 117 bus_dma_tag_t jme_ssb_tag; 118 bus_dmamap_t jme_ssb_map; 119 bus_dma_tag_t jme_tx_tag; 120 struct jme_txdesc jme_txdesc[JME_TX_RING_CNT]; 121 bus_dma_tag_t jme_rx_tag; 122 struct jme_rxdesc jme_rxdesc[JME_RX_RING_CNT]; 123 bus_dma_tag_t jme_tx_ring_tag; 124 bus_dmamap_t jme_tx_ring_map; 125 bus_dma_tag_t jme_rx_ring_tag; 126 bus_dmamap_t jme_rx_ring_map; 127 bus_dmamap_t jme_rx_sparemap; 128 129 int jme_tx_prod; 130 int jme_tx_cons; 131 int jme_tx_cnt; 132 int jme_rx_cons; 133 int jme_rxlen; 134 135 struct mbuf *jme_rxhead; 136 struct mbuf *jme_rxtail; 137 }; 138 139 struct jme_ring_data { 140 struct jme_desc *jme_tx_ring; 141 bus_addr_t jme_tx_ring_paddr; 142 struct jme_desc *jme_rx_ring; 143 bus_addr_t jme_rx_ring_paddr; 144 struct jme_ssb *jme_ssb_block; 145 bus_addr_t jme_ssb_block_paddr; 146 }; 147 148 #define JME_TX_RING_ADDR(sc, i) \ 149 ((sc)->jme_rdata.jme_tx_ring_paddr + sizeof(struct jme_desc) * (i)) 150 #define JME_RX_RING_ADDR(sc, i) \ 151 ((sc)->jme_rdata.jme_rx_ring_paddr + sizeof(struct jme_desc) * (i)) 152 153 #define JME_TX_RING_SIZE \ 154 (sizeof(struct jme_desc) * JME_TX_RING_CNT) 155 #define JME_RX_RING_SIZE \ 156 (sizeof(struct jme_desc) * JME_RX_RING_CNT) 157 #define JME_SSB_SIZE sizeof(struct jme_ssb) 158 159 /* Statistics counters. */ 160 struct jme_hw_stats { 161 uint32_t rx_good_frames; 162 uint32_t rx_crc_errs; 163 uint32_t rx_mii_errs; 164 uint32_t rx_fifo_oflows; 165 uint32_t rx_desc_empty; 166 uint32_t rx_bad_frames; 167 uint32_t tx_good_frames; 168 uint32_t tx_bad_frames; 169 }; 170 171 /* 172 * Software state per device. 173 */ 174 struct jme_softc { 175 if_t jme_ifp; 176 device_t jme_dev; 177 device_t jme_miibus; 178 struct resource *jme_res[1]; 179 struct resource_spec *jme_res_spec; 180 struct resource *jme_irq[JME_MSI_MESSAGES]; 181 struct resource_spec *jme_irq_spec; 182 void *jme_intrhand[JME_MSI_MESSAGES]; 183 int jme_rev; 184 int jme_chip_rev; 185 int jme_phyaddr; 186 uint8_t jme_eaddr[ETHER_ADDR_LEN]; 187 uint32_t jme_tx_dma_size; 188 uint32_t jme_rx_dma_size; 189 int jme_flags; 190 #define JME_FLAG_FPGA 0x00000001 191 #define JME_FLAG_PCIE 0x00000002 192 #define JME_FLAG_PCIX 0x00000004 193 #define JME_FLAG_MSI 0x00000008 194 #define JME_FLAG_MSIX 0x00000010 195 #define JME_FLAG_PMCAP 0x00000020 196 #define JME_FLAG_FASTETH 0x00000040 197 #define JME_FLAG_NOJUMBO 0x00000080 198 #define JME_FLAG_RXCLK 0x00000100 199 #define JME_FLAG_TXCLK 0x00000200 200 #define JME_FLAG_DMA32BIT 0x00000400 201 #define JME_FLAG_HWMIB 0x00000800 202 #define JME_FLAG_EFUSE 0x00001000 203 #define JME_FLAG_PCCPCD 0x00002000 204 #define JME_FLAG_DETACH 0x40000000 205 #define JME_FLAG_LINK 0x80000000 206 207 struct jme_hw_stats jme_ostats; 208 struct jme_hw_stats jme_stats; 209 struct callout jme_tick_ch; 210 struct jme_chain_data jme_cdata; 211 struct jme_ring_data jme_rdata; 212 int jme_if_flags; 213 int jme_watchdog_timer; 214 uint32_t jme_txcsr; 215 uint32_t jme_rxcsr; 216 int jme_process_limit; 217 int jme_tx_coal_to; 218 int jme_tx_pcd_to; 219 int jme_tx_coal_pkt; 220 int jme_rx_coal_to; 221 int jme_rx_pcd_to; 222 int jme_rx_coal_pkt; 223 volatile int jme_morework; 224 225 struct task jme_int_task; 226 struct task jme_link_task; 227 struct taskqueue *jme_tq; 228 struct mtx jme_mtx; 229 }; 230 231 /* Register access macros. */ 232 #define CSR_WRITE_4(_sc, reg, val) \ 233 bus_write_4((_sc)->jme_res[0], (reg), (val)) 234 #define CSR_READ_4(_sc, reg) \ 235 bus_read_4((_sc)->jme_res[0], (reg)) 236 237 #define JME_LOCK(_sc) mtx_lock(&(_sc)->jme_mtx) 238 #define JME_UNLOCK(_sc) mtx_unlock(&(_sc)->jme_mtx) 239 #define JME_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->jme_mtx, MA_OWNED) 240 241 #define JME_MAXERR 5 242 243 #define JME_RXCHAIN_RESET(_sc) \ 244 do { \ 245 (_sc)->jme_cdata.jme_rxhead = NULL; \ 246 (_sc)->jme_cdata.jme_rxtail = NULL; \ 247 (_sc)->jme_cdata.jme_rxlen = 0; \ 248 } while (0) 249 250 #define JME_TX_TIMEOUT 5 251 #define JME_TIMEOUT 1000 252 #define JME_PHY_TIMEOUT 1000 253 #define JME_EEPROM_TIMEOUT 1000 254 255 #endif 256