1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Authors: Ravi Pokala (rpokala@freebsd.org) 5 * 6 * Copyright (c) 2018 Panasas 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * $FreeBSD$ 31 */ 32 33 #ifndef _DEV__JEDEC_DIMM__JEDEC_DIMM_H_ 34 #define _DEV__JEDEC_DIMM__JEDEC_DIMM_H_ 35 36 /* JEDEC DIMMs include one or more SMBus devices. 37 * 38 * At a minimum, they have an EEPROM containing either 256 bytes (DDR3) or 512 39 * bytes (DDR4) of "Serial Presence Detect" (SPD) information. The SPD contains 40 * data used by the memory controller to configure itself, and it also includes 41 * asset information. The layout of SPD data is defined in: 42 * 43 * JEDEC Standard 21-C, Annex K (DDR3) 44 * JEDEC Standard 21-C, Annex L (DDR4) 45 * 46 * DIMMs may also include a "Thermal Sensor on DIMM" (TSOD), which reports 47 * temperature data. While not strictly required, the TSOD is so often included 48 * that JEDEC defined standards for single chips which include both SPD and TSOD 49 * functions. They respond on multiple SMBus addresses, depending on the 50 * function. 51 * 52 * JEDEC Standard 21-C, TSE2002av (DDR3) 53 * JEDEC Standard 21-C, TSE2004av (DDR4) 54 */ 55 56 /* TSE2004av defines several Device Type Identifiers (DTIs), which are the high 57 * nybble of the SMBus address. Addresses with DTIs of PROTECT (or PAGE, which 58 * has the same value) are essentially "broadcast" addresses; all SPD devices 59 * respond to them, changing their mode based on the Logical Serial Address 60 * (LSA) encoded in bits [3:1]. For normal SPD access, bits [3:1] encode the 61 * DIMM slot number. 62 */ 63 #define JEDEC_SPD_PAGE_SIZE 256 64 #define JEDEC_DTI_SPD 0xa0 65 #define JEDEC_DTI_TSOD 0x30 66 #define JEDEC_DTI_PROTECT 0x60 67 #define JEDEC_LSA_PROTECT_SET0 0x02 68 #define JEDEC_LSA_PROTECT_SET1 0x08 69 #define JEDEC_LSA_PROTECT_SET2 0x0a 70 #define JEDEC_LSA_PROTECT_SET3 0x00 71 #define JEDEC_LSA_PROTECT_CLR 0x06 72 #define JEDEC_LSA_PROTECT_GET0 0x03 73 #define JEDEC_LSA_PROTECT_GET1 0x09 74 #define JEDEC_LSA_PROTECT_GET2 0x0b 75 #define JEDEC_LSA_PROTECT_GET3 0x01 76 #define JEDEC_DTI_PAGE 0x60 77 #define JEDEC_LSA_PAGE_SET0 0x0c 78 #define JEDEC_LSA_PAGE_SET1 0x0e 79 #define JEDEC_LSA_PAGE_GET 0x0d 80 81 /* The offsets and lengths of various SPD bytes are defined in Annex K (DDR3) 82 * and Annex L (DDR4). Conveniently, the DRAM type is at the same offset for 83 * both versions. 84 * 85 * This list only includes information needed to get the asset information and 86 * calculate the DIMM capacity. 87 */ 88 #define SPD_OFFSET_DRAM_TYPE 2 89 #define SPD_OFFSET_DDR3_SDRAM_CAPACITY 4 90 #define SPD_OFFSET_DDR3_DIMM_RANKS 7 91 #define SPD_OFFSET_DDR3_SDRAM_WIDTH 7 92 #define SPD_OFFSET_DDR3_BUS_WIDTH 8 93 #define SPD_OFFSET_DDR3_TSOD_PRESENT 32 94 #define SPD_OFFSET_DDR3_SERIAL 122 95 #define SPD_LEN_DDR3_SERIAL 4 96 #define SPD_OFFSET_DDR3_PARTNUM 128 97 #define SPD_LEN_DDR3_PARTNUM 18 98 #define SPD_OFFSET_DDR4_SDRAM_CAPACITY 4 99 #define SPD_OFFSET_DDR4_SDRAM_PKG_TYPE 6 100 #define SPD_OFFSET_DDR4_DIMM_RANKS 12 101 #define SPD_OFFSET_DDR4_SDRAM_WIDTH 12 102 #define SPD_OFFSET_DDR4_BUS_WIDTH 13 103 #define SPD_OFFSET_DDR4_TSOD_PRESENT 14 104 #define SPD_OFFSET_DDR4_SERIAL 325 105 #define SPD_LEN_DDR4_SERIAL 4 106 #define SPD_OFFSET_DDR4_PARTNUM 329 107 #define SPD_LEN_DDR4_PARTNUM 20 108 109 /* The "DRAM Type" field of the SPD enumerates various memory technologies which 110 * have been used over the years. The list is append-only, so we need only refer 111 * to the latest SPD specification. In this case, Annex L for DDR4. 112 */ 113 enum dram_type { 114 DRAM_TYPE_RESERVED = 0x00, 115 DRAM_TYPE_FAST_PAGE_MODE = 0x01, 116 DRAM_TYPE_EDO = 0x02, 117 DRAM_TYPE_PIPLEINED_NYBBLE = 0x03, 118 DRAM_TYPE_SDRAM = 0x04, 119 DRAM_TYPE_ROM = 0x05, 120 DRAM_TYPE_DDR_SGRAM = 0x06, 121 DRAM_TYPE_DDR_SDRAM = 0x07, 122 DRAM_TYPE_DDR2_SDRAM = 0x08, 123 DRAM_TYPE_DDR2_SDRAM_FBDIMM = 0x09, 124 DRAM_TYPE_DDR2_SDRAM_FBDIMM_PROBE = 0x0a, 125 DRAM_TYPE_DDR3_SDRAM = 0x0b, 126 DRAM_TYPE_DDR4_SDRAM = 0x0c, 127 DRAM_TYPE_RESERVED_0D = 0x0d, 128 DRAM_TYPE_DDR4E_SDRAM = 0x0e, 129 DRAM_TYPE_LPDDR3_SDRAM = 0x0f, 130 DRAM_TYPE_LPDDR4_SDRAM = 0x10, 131 }; 132 133 /* The TSOD is accessed using a simple word interface, which is identical 134 * between TSE2002av (DDR3) and TSE2004av (DDR4). 135 */ 136 #define TSOD_REG_CAPABILITES 0 137 #define TSOD_REG_CONFIG 1 138 #define TSOD_REG_LIM_HIGH 2 139 #define TSOD_REG_LIM_LOW 3 140 #define TSOD_REG_LIM_CRIT 4 141 #define TSOD_REG_TEMPERATURE 5 142 #define TSOD_REG_MANUFACTURER 6 143 #define TSOD_REG_DEV_REV 7 144 145 #endif /* _DEV__JEDEC_DIMM__JEDEC_DIMM_H_ */ 146 147 /* vi: set ts=8 sw=4 sts=8 noet: */ 148