1 /****************************************************************************** 2 3 Copyright (c) 2013-2014, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 #include "i40e_status.h" 36 #include "i40e_type.h" 37 #include "i40e_register.h" 38 #include "i40e_adminq.h" 39 #include "i40e_prototype.h" 40 41 /** 42 * i40e_is_nvm_update_op - return TRUE if this is an NVM update operation 43 * @desc: API request descriptor 44 **/ 45 static INLINE bool i40e_is_nvm_update_op(struct i40e_aq_desc *desc) 46 { 47 return (desc->opcode == CPU_TO_LE16(i40e_aqc_opc_nvm_erase) || 48 desc->opcode == CPU_TO_LE16(i40e_aqc_opc_nvm_update)); 49 } 50 51 /** 52 * i40e_adminq_init_regs - Initialize AdminQ registers 53 * @hw: pointer to the hardware structure 54 * 55 * This assumes the alloc_asq and alloc_arq functions have already been called 56 **/ 57 static void i40e_adminq_init_regs(struct i40e_hw *hw) 58 { 59 /* set head and tail registers in our local struct */ 60 if (i40e_is_vf(hw)) { 61 hw->aq.asq.tail = I40E_VF_ATQT1; 62 hw->aq.asq.head = I40E_VF_ATQH1; 63 hw->aq.asq.len = I40E_VF_ATQLEN1; 64 hw->aq.asq.bal = I40E_VF_ATQBAL1; 65 hw->aq.asq.bah = I40E_VF_ATQBAH1; 66 hw->aq.arq.tail = I40E_VF_ARQT1; 67 hw->aq.arq.head = I40E_VF_ARQH1; 68 hw->aq.arq.len = I40E_VF_ARQLEN1; 69 hw->aq.arq.bal = I40E_VF_ARQBAL1; 70 hw->aq.arq.bah = I40E_VF_ARQBAH1; 71 } else { 72 hw->aq.asq.tail = I40E_PF_ATQT; 73 hw->aq.asq.head = I40E_PF_ATQH; 74 hw->aq.asq.len = I40E_PF_ATQLEN; 75 hw->aq.asq.bal = I40E_PF_ATQBAL; 76 hw->aq.asq.bah = I40E_PF_ATQBAH; 77 hw->aq.arq.tail = I40E_PF_ARQT; 78 hw->aq.arq.head = I40E_PF_ARQH; 79 hw->aq.arq.len = I40E_PF_ARQLEN; 80 hw->aq.arq.bal = I40E_PF_ARQBAL; 81 hw->aq.arq.bah = I40E_PF_ARQBAH; 82 } 83 } 84 85 /** 86 * i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings 87 * @hw: pointer to the hardware structure 88 **/ 89 enum i40e_status_code i40e_alloc_adminq_asq_ring(struct i40e_hw *hw) 90 { 91 enum i40e_status_code ret_code; 92 93 ret_code = i40e_allocate_dma_mem(hw, &hw->aq.asq.desc_buf, 94 i40e_mem_atq_ring, 95 (hw->aq.num_asq_entries * 96 sizeof(struct i40e_aq_desc)), 97 I40E_ADMINQ_DESC_ALIGNMENT); 98 if (ret_code) 99 return ret_code; 100 101 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.cmd_buf, 102 (hw->aq.num_asq_entries * 103 sizeof(struct i40e_asq_cmd_details))); 104 if (ret_code) { 105 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 106 return ret_code; 107 } 108 109 return ret_code; 110 } 111 112 /** 113 * i40e_alloc_adminq_arq_ring - Allocate Admin Queue receive rings 114 * @hw: pointer to the hardware structure 115 **/ 116 enum i40e_status_code i40e_alloc_adminq_arq_ring(struct i40e_hw *hw) 117 { 118 enum i40e_status_code ret_code; 119 120 ret_code = i40e_allocate_dma_mem(hw, &hw->aq.arq.desc_buf, 121 i40e_mem_arq_ring, 122 (hw->aq.num_arq_entries * 123 sizeof(struct i40e_aq_desc)), 124 I40E_ADMINQ_DESC_ALIGNMENT); 125 126 return ret_code; 127 } 128 129 /** 130 * i40e_free_adminq_asq - Free Admin Queue send rings 131 * @hw: pointer to the hardware structure 132 * 133 * This assumes the posted send buffers have already been cleaned 134 * and de-allocated 135 **/ 136 void i40e_free_adminq_asq(struct i40e_hw *hw) 137 { 138 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 139 } 140 141 /** 142 * i40e_free_adminq_arq - Free Admin Queue receive rings 143 * @hw: pointer to the hardware structure 144 * 145 * This assumes the posted receive buffers have already been cleaned 146 * and de-allocated 147 **/ 148 void i40e_free_adminq_arq(struct i40e_hw *hw) 149 { 150 i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf); 151 } 152 153 /** 154 * i40e_alloc_arq_bufs - Allocate pre-posted buffers for the receive queue 155 * @hw: pointer to the hardware structure 156 **/ 157 static enum i40e_status_code i40e_alloc_arq_bufs(struct i40e_hw *hw) 158 { 159 enum i40e_status_code ret_code; 160 struct i40e_aq_desc *desc; 161 struct i40e_dma_mem *bi; 162 int i; 163 164 /* We'll be allocating the buffer info memory first, then we can 165 * allocate the mapped buffers for the event processing 166 */ 167 168 /* buffer_info structures do not need alignment */ 169 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.arq.dma_head, 170 (hw->aq.num_arq_entries * sizeof(struct i40e_dma_mem))); 171 if (ret_code) 172 goto alloc_arq_bufs; 173 hw->aq.arq.r.arq_bi = (struct i40e_dma_mem *)hw->aq.arq.dma_head.va; 174 175 /* allocate the mapped buffers */ 176 for (i = 0; i < hw->aq.num_arq_entries; i++) { 177 bi = &hw->aq.arq.r.arq_bi[i]; 178 ret_code = i40e_allocate_dma_mem(hw, bi, 179 i40e_mem_arq_buf, 180 hw->aq.arq_buf_size, 181 I40E_ADMINQ_DESC_ALIGNMENT); 182 if (ret_code) 183 goto unwind_alloc_arq_bufs; 184 185 /* now configure the descriptors for use */ 186 desc = I40E_ADMINQ_DESC(hw->aq.arq, i); 187 188 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF); 189 if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF) 190 desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB); 191 desc->opcode = 0; 192 /* This is in accordance with Admin queue design, there is no 193 * register for buffer size configuration 194 */ 195 desc->datalen = CPU_TO_LE16((u16)bi->size); 196 desc->retval = 0; 197 desc->cookie_high = 0; 198 desc->cookie_low = 0; 199 desc->params.external.addr_high = 200 CPU_TO_LE32(I40E_HI_DWORD(bi->pa)); 201 desc->params.external.addr_low = 202 CPU_TO_LE32(I40E_LO_DWORD(bi->pa)); 203 desc->params.external.param0 = 0; 204 desc->params.external.param1 = 0; 205 } 206 207 alloc_arq_bufs: 208 return ret_code; 209 210 unwind_alloc_arq_bufs: 211 /* don't try to free the one that failed... */ 212 i--; 213 for (; i >= 0; i--) 214 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]); 215 i40e_free_virt_mem(hw, &hw->aq.arq.dma_head); 216 217 return ret_code; 218 } 219 220 /** 221 * i40e_alloc_asq_bufs - Allocate empty buffer structs for the send queue 222 * @hw: pointer to the hardware structure 223 **/ 224 static enum i40e_status_code i40e_alloc_asq_bufs(struct i40e_hw *hw) 225 { 226 enum i40e_status_code ret_code; 227 struct i40e_dma_mem *bi; 228 int i; 229 230 /* No mapped memory needed yet, just the buffer info structures */ 231 ret_code = i40e_allocate_virt_mem(hw, &hw->aq.asq.dma_head, 232 (hw->aq.num_asq_entries * sizeof(struct i40e_dma_mem))); 233 if (ret_code) 234 goto alloc_asq_bufs; 235 hw->aq.asq.r.asq_bi = (struct i40e_dma_mem *)hw->aq.asq.dma_head.va; 236 237 /* allocate the mapped buffers */ 238 for (i = 0; i < hw->aq.num_asq_entries; i++) { 239 bi = &hw->aq.asq.r.asq_bi[i]; 240 ret_code = i40e_allocate_dma_mem(hw, bi, 241 i40e_mem_asq_buf, 242 hw->aq.asq_buf_size, 243 I40E_ADMINQ_DESC_ALIGNMENT); 244 if (ret_code) 245 goto unwind_alloc_asq_bufs; 246 } 247 alloc_asq_bufs: 248 return ret_code; 249 250 unwind_alloc_asq_bufs: 251 /* don't try to free the one that failed... */ 252 i--; 253 for (; i >= 0; i--) 254 i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]); 255 i40e_free_virt_mem(hw, &hw->aq.asq.dma_head); 256 257 return ret_code; 258 } 259 260 /** 261 * i40e_free_arq_bufs - Free receive queue buffer info elements 262 * @hw: pointer to the hardware structure 263 **/ 264 static void i40e_free_arq_bufs(struct i40e_hw *hw) 265 { 266 int i; 267 268 /* free descriptors */ 269 for (i = 0; i < hw->aq.num_arq_entries; i++) 270 i40e_free_dma_mem(hw, &hw->aq.arq.r.arq_bi[i]); 271 272 /* free the descriptor memory */ 273 i40e_free_dma_mem(hw, &hw->aq.arq.desc_buf); 274 275 /* free the dma header */ 276 i40e_free_virt_mem(hw, &hw->aq.arq.dma_head); 277 } 278 279 /** 280 * i40e_free_asq_bufs - Free send queue buffer info elements 281 * @hw: pointer to the hardware structure 282 **/ 283 static void i40e_free_asq_bufs(struct i40e_hw *hw) 284 { 285 int i; 286 287 /* only unmap if the address is non-NULL */ 288 for (i = 0; i < hw->aq.num_asq_entries; i++) 289 if (hw->aq.asq.r.asq_bi[i].pa) 290 i40e_free_dma_mem(hw, &hw->aq.asq.r.asq_bi[i]); 291 292 /* free the buffer info list */ 293 i40e_free_virt_mem(hw, &hw->aq.asq.cmd_buf); 294 295 /* free the descriptor memory */ 296 i40e_free_dma_mem(hw, &hw->aq.asq.desc_buf); 297 298 /* free the dma header */ 299 i40e_free_virt_mem(hw, &hw->aq.asq.dma_head); 300 } 301 302 /** 303 * i40e_config_asq_regs - configure ASQ registers 304 * @hw: pointer to the hardware structure 305 * 306 * Configure base address and length registers for the transmit queue 307 **/ 308 static enum i40e_status_code i40e_config_asq_regs(struct i40e_hw *hw) 309 { 310 enum i40e_status_code ret_code = I40E_SUCCESS; 311 u32 reg = 0; 312 313 /* Clear Head and Tail */ 314 wr32(hw, hw->aq.asq.head, 0); 315 wr32(hw, hw->aq.asq.tail, 0); 316 317 /* set starting point */ 318 wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries | 319 I40E_PF_ATQLEN_ATQENABLE_MASK)); 320 wr32(hw, hw->aq.asq.bal, I40E_LO_DWORD(hw->aq.asq.desc_buf.pa)); 321 wr32(hw, hw->aq.asq.bah, I40E_HI_DWORD(hw->aq.asq.desc_buf.pa)); 322 323 /* Check one register to verify that config was applied */ 324 reg = rd32(hw, hw->aq.asq.bal); 325 if (reg != I40E_LO_DWORD(hw->aq.asq.desc_buf.pa)) 326 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 327 328 return ret_code; 329 } 330 331 /** 332 * i40e_config_arq_regs - ARQ register configuration 333 * @hw: pointer to the hardware structure 334 * 335 * Configure base address and length registers for the receive (event queue) 336 **/ 337 static enum i40e_status_code i40e_config_arq_regs(struct i40e_hw *hw) 338 { 339 enum i40e_status_code ret_code = I40E_SUCCESS; 340 u32 reg = 0; 341 342 /* Clear Head and Tail */ 343 wr32(hw, hw->aq.arq.head, 0); 344 wr32(hw, hw->aq.arq.tail, 0); 345 346 /* set starting point */ 347 wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries | 348 I40E_PF_ARQLEN_ARQENABLE_MASK)); 349 wr32(hw, hw->aq.arq.bal, I40E_LO_DWORD(hw->aq.arq.desc_buf.pa)); 350 wr32(hw, hw->aq.arq.bah, I40E_HI_DWORD(hw->aq.arq.desc_buf.pa)); 351 352 /* Update tail in the HW to post pre-allocated buffers */ 353 wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1); 354 355 /* Check one register to verify that config was applied */ 356 reg = rd32(hw, hw->aq.arq.bal); 357 if (reg != I40E_LO_DWORD(hw->aq.arq.desc_buf.pa)) 358 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 359 360 return ret_code; 361 } 362 363 /** 364 * i40e_init_asq - main initialization routine for ASQ 365 * @hw: pointer to the hardware structure 366 * 367 * This is the main initialization routine for the Admin Send Queue 368 * Prior to calling this function, drivers *MUST* set the following fields 369 * in the hw->aq structure: 370 * - hw->aq.num_asq_entries 371 * - hw->aq.arq_buf_size 372 * 373 * Do *NOT* hold the lock when calling this as the memory allocation routines 374 * called are not going to be atomic context safe 375 **/ 376 enum i40e_status_code i40e_init_asq(struct i40e_hw *hw) 377 { 378 enum i40e_status_code ret_code = I40E_SUCCESS; 379 380 if (hw->aq.asq.count > 0) { 381 /* queue already initialized */ 382 ret_code = I40E_ERR_NOT_READY; 383 goto init_adminq_exit; 384 } 385 386 /* verify input for valid configuration */ 387 if ((hw->aq.num_asq_entries == 0) || 388 (hw->aq.asq_buf_size == 0)) { 389 ret_code = I40E_ERR_CONFIG; 390 goto init_adminq_exit; 391 } 392 393 hw->aq.asq.next_to_use = 0; 394 hw->aq.asq.next_to_clean = 0; 395 hw->aq.asq.count = hw->aq.num_asq_entries; 396 397 /* allocate the ring memory */ 398 ret_code = i40e_alloc_adminq_asq_ring(hw); 399 if (ret_code != I40E_SUCCESS) 400 goto init_adminq_exit; 401 402 /* allocate buffers in the rings */ 403 ret_code = i40e_alloc_asq_bufs(hw); 404 if (ret_code != I40E_SUCCESS) 405 goto init_adminq_free_rings; 406 407 /* initialize base registers */ 408 ret_code = i40e_config_asq_regs(hw); 409 if (ret_code != I40E_SUCCESS) 410 goto init_adminq_free_rings; 411 412 /* success! */ 413 goto init_adminq_exit; 414 415 init_adminq_free_rings: 416 i40e_free_adminq_asq(hw); 417 418 init_adminq_exit: 419 return ret_code; 420 } 421 422 /** 423 * i40e_init_arq - initialize ARQ 424 * @hw: pointer to the hardware structure 425 * 426 * The main initialization routine for the Admin Receive (Event) Queue. 427 * Prior to calling this function, drivers *MUST* set the following fields 428 * in the hw->aq structure: 429 * - hw->aq.num_asq_entries 430 * - hw->aq.arq_buf_size 431 * 432 * Do *NOT* hold the lock when calling this as the memory allocation routines 433 * called are not going to be atomic context safe 434 **/ 435 enum i40e_status_code i40e_init_arq(struct i40e_hw *hw) 436 { 437 enum i40e_status_code ret_code = I40E_SUCCESS; 438 439 if (hw->aq.arq.count > 0) { 440 /* queue already initialized */ 441 ret_code = I40E_ERR_NOT_READY; 442 goto init_adminq_exit; 443 } 444 445 /* verify input for valid configuration */ 446 if ((hw->aq.num_arq_entries == 0) || 447 (hw->aq.arq_buf_size == 0)) { 448 ret_code = I40E_ERR_CONFIG; 449 goto init_adminq_exit; 450 } 451 452 hw->aq.arq.next_to_use = 0; 453 hw->aq.arq.next_to_clean = 0; 454 hw->aq.arq.count = hw->aq.num_arq_entries; 455 456 /* allocate the ring memory */ 457 ret_code = i40e_alloc_adminq_arq_ring(hw); 458 if (ret_code != I40E_SUCCESS) 459 goto init_adminq_exit; 460 461 /* allocate buffers in the rings */ 462 ret_code = i40e_alloc_arq_bufs(hw); 463 if (ret_code != I40E_SUCCESS) 464 goto init_adminq_free_rings; 465 466 /* initialize base registers */ 467 ret_code = i40e_config_arq_regs(hw); 468 if (ret_code != I40E_SUCCESS) 469 goto init_adminq_free_rings; 470 471 /* success! */ 472 goto init_adminq_exit; 473 474 init_adminq_free_rings: 475 i40e_free_adminq_arq(hw); 476 477 init_adminq_exit: 478 return ret_code; 479 } 480 481 /** 482 * i40e_shutdown_asq - shutdown the ASQ 483 * @hw: pointer to the hardware structure 484 * 485 * The main shutdown routine for the Admin Send Queue 486 **/ 487 enum i40e_status_code i40e_shutdown_asq(struct i40e_hw *hw) 488 { 489 enum i40e_status_code ret_code = I40E_SUCCESS; 490 491 if (hw->aq.asq.count == 0) 492 return I40E_ERR_NOT_READY; 493 494 /* Stop firmware AdminQ processing */ 495 wr32(hw, hw->aq.asq.head, 0); 496 wr32(hw, hw->aq.asq.tail, 0); 497 wr32(hw, hw->aq.asq.len, 0); 498 wr32(hw, hw->aq.asq.bal, 0); 499 wr32(hw, hw->aq.asq.bah, 0); 500 501 /* make sure spinlock is available */ 502 i40e_acquire_spinlock(&hw->aq.asq_spinlock); 503 504 hw->aq.asq.count = 0; /* to indicate uninitialized queue */ 505 506 /* free ring buffers */ 507 i40e_free_asq_bufs(hw); 508 509 i40e_release_spinlock(&hw->aq.asq_spinlock); 510 511 return ret_code; 512 } 513 514 /** 515 * i40e_shutdown_arq - shutdown ARQ 516 * @hw: pointer to the hardware structure 517 * 518 * The main shutdown routine for the Admin Receive Queue 519 **/ 520 enum i40e_status_code i40e_shutdown_arq(struct i40e_hw *hw) 521 { 522 enum i40e_status_code ret_code = I40E_SUCCESS; 523 524 if (hw->aq.arq.count == 0) 525 return I40E_ERR_NOT_READY; 526 527 /* Stop firmware AdminQ processing */ 528 wr32(hw, hw->aq.arq.head, 0); 529 wr32(hw, hw->aq.arq.tail, 0); 530 wr32(hw, hw->aq.arq.len, 0); 531 wr32(hw, hw->aq.arq.bal, 0); 532 wr32(hw, hw->aq.arq.bah, 0); 533 534 /* make sure spinlock is available */ 535 i40e_acquire_spinlock(&hw->aq.arq_spinlock); 536 537 hw->aq.arq.count = 0; /* to indicate uninitialized queue */ 538 539 /* free ring buffers */ 540 i40e_free_arq_bufs(hw); 541 542 i40e_release_spinlock(&hw->aq.arq_spinlock); 543 544 return ret_code; 545 } 546 547 /** 548 * i40e_init_adminq - main initialization routine for Admin Queue 549 * @hw: pointer to the hardware structure 550 * 551 * Prior to calling this function, drivers *MUST* set the following fields 552 * in the hw->aq structure: 553 * - hw->aq.num_asq_entries 554 * - hw->aq.num_arq_entries 555 * - hw->aq.arq_buf_size 556 * - hw->aq.asq_buf_size 557 **/ 558 enum i40e_status_code i40e_init_adminq(struct i40e_hw *hw) 559 { 560 enum i40e_status_code ret_code; 561 u16 eetrack_lo, eetrack_hi; 562 int retry = 0; 563 /* verify input for valid configuration */ 564 if ((hw->aq.num_arq_entries == 0) || 565 (hw->aq.num_asq_entries == 0) || 566 (hw->aq.arq_buf_size == 0) || 567 (hw->aq.asq_buf_size == 0)) { 568 ret_code = I40E_ERR_CONFIG; 569 goto init_adminq_exit; 570 } 571 572 /* initialize spin locks */ 573 i40e_init_spinlock(&hw->aq.asq_spinlock); 574 i40e_init_spinlock(&hw->aq.arq_spinlock); 575 576 /* Set up register offsets */ 577 i40e_adminq_init_regs(hw); 578 579 /* setup ASQ command write back timeout */ 580 hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT; 581 582 /* allocate the ASQ */ 583 ret_code = i40e_init_asq(hw); 584 if (ret_code != I40E_SUCCESS) 585 goto init_adminq_destroy_spinlocks; 586 587 /* allocate the ARQ */ 588 ret_code = i40e_init_arq(hw); 589 if (ret_code != I40E_SUCCESS) 590 goto init_adminq_free_asq; 591 592 if (i40e_is_vf(hw)) /* VF has no need of firmware */ 593 goto init_adminq_exit; 594 595 /* There are some cases where the firmware may not be quite ready 596 * for AdminQ operations, so we retry the AdminQ setup a few times 597 * if we see timeouts in this first AQ call. 598 */ 599 do { 600 ret_code = i40e_aq_get_firmware_version(hw, 601 &hw->aq.fw_maj_ver, 602 &hw->aq.fw_min_ver, 603 &hw->aq.api_maj_ver, 604 &hw->aq.api_min_ver, 605 NULL); 606 if (ret_code != I40E_ERR_ADMIN_QUEUE_TIMEOUT) 607 break; 608 retry++; 609 i40e_msec_delay(100); 610 i40e_resume_aq(hw); 611 } while (retry < 10); 612 if (ret_code != I40E_SUCCESS) 613 goto init_adminq_free_arq; 614 615 /* get the NVM version info */ 616 i40e_read_nvm_word(hw, I40E_SR_NVM_IMAGE_VERSION, &hw->nvm.version); 617 i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_LO, &eetrack_lo); 618 i40e_read_nvm_word(hw, I40E_SR_NVM_EETRACK_HI, &eetrack_hi); 619 hw->nvm.eetrack = (eetrack_hi << 16) | eetrack_lo; 620 621 if (hw->aq.api_maj_ver > I40E_FW_API_VERSION_MAJOR) { 622 ret_code = I40E_ERR_FIRMWARE_API_VERSION; 623 goto init_adminq_free_arq; 624 } 625 626 /* pre-emptive resource lock release */ 627 i40e_aq_release_resource(hw, I40E_NVM_RESOURCE_ID, 0, NULL); 628 hw->aq.nvm_busy = FALSE; 629 630 ret_code = i40e_aq_set_hmc_resource_profile(hw, 631 I40E_HMC_PROFILE_DEFAULT, 632 0, 633 NULL); 634 ret_code = I40E_SUCCESS; 635 636 /* success! */ 637 goto init_adminq_exit; 638 639 init_adminq_free_arq: 640 i40e_shutdown_arq(hw); 641 init_adminq_free_asq: 642 i40e_shutdown_asq(hw); 643 init_adminq_destroy_spinlocks: 644 i40e_destroy_spinlock(&hw->aq.asq_spinlock); 645 i40e_destroy_spinlock(&hw->aq.arq_spinlock); 646 647 init_adminq_exit: 648 return ret_code; 649 } 650 651 /** 652 * i40e_shutdown_adminq - shutdown routine for the Admin Queue 653 * @hw: pointer to the hardware structure 654 **/ 655 enum i40e_status_code i40e_shutdown_adminq(struct i40e_hw *hw) 656 { 657 enum i40e_status_code ret_code = I40E_SUCCESS; 658 659 if (i40e_check_asq_alive(hw)) 660 i40e_aq_queue_shutdown(hw, TRUE); 661 662 i40e_shutdown_asq(hw); 663 i40e_shutdown_arq(hw); 664 665 /* destroy the spinlocks */ 666 i40e_destroy_spinlock(&hw->aq.asq_spinlock); 667 i40e_destroy_spinlock(&hw->aq.arq_spinlock); 668 669 return ret_code; 670 } 671 672 /** 673 * i40e_clean_asq - cleans Admin send queue 674 * @hw: pointer to the hardware structure 675 * 676 * returns the number of free desc 677 **/ 678 u16 i40e_clean_asq(struct i40e_hw *hw) 679 { 680 struct i40e_adminq_ring *asq = &(hw->aq.asq); 681 struct i40e_asq_cmd_details *details; 682 u16 ntc = asq->next_to_clean; 683 struct i40e_aq_desc desc_cb; 684 struct i40e_aq_desc *desc; 685 686 desc = I40E_ADMINQ_DESC(*asq, ntc); 687 details = I40E_ADMINQ_DETAILS(*asq, ntc); 688 while (rd32(hw, hw->aq.asq.head) != ntc) { 689 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 690 "%s: ntc %d head %d.\n", __FUNCTION__, ntc, 691 rd32(hw, hw->aq.asq.head)); 692 693 if (details->callback) { 694 I40E_ADMINQ_CALLBACK cb_func = 695 (I40E_ADMINQ_CALLBACK)details->callback; 696 i40e_memcpy(&desc_cb, desc, 697 sizeof(struct i40e_aq_desc), I40E_DMA_TO_DMA); 698 cb_func(hw, &desc_cb); 699 } 700 i40e_memset(desc, 0, sizeof(*desc), I40E_DMA_MEM); 701 i40e_memset(details, 0, sizeof(*details), I40E_NONDMA_MEM); 702 ntc++; 703 if (ntc == asq->count) 704 ntc = 0; 705 desc = I40E_ADMINQ_DESC(*asq, ntc); 706 details = I40E_ADMINQ_DETAILS(*asq, ntc); 707 } 708 709 asq->next_to_clean = ntc; 710 711 return I40E_DESC_UNUSED(asq); 712 } 713 714 /** 715 * i40e_asq_done - check if FW has processed the Admin Send Queue 716 * @hw: pointer to the hw struct 717 * 718 * Returns TRUE if the firmware has processed all descriptors on the 719 * admin send queue. Returns FALSE if there are still requests pending. 720 **/ 721 bool i40e_asq_done(struct i40e_hw *hw) 722 { 723 /* AQ designers suggest use of head for better 724 * timing reliability than DD bit 725 */ 726 return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use; 727 728 } 729 730 /** 731 * i40e_asq_send_command - send command to Admin Queue 732 * @hw: pointer to the hw struct 733 * @desc: prefilled descriptor describing the command (non DMA mem) 734 * @buff: buffer to use for indirect commands 735 * @buff_size: size of buffer for indirect commands 736 * @cmd_details: pointer to command details structure 737 * 738 * This is the main send command driver routine for the Admin Queue send 739 * queue. It runs the queue, cleans the queue, etc 740 **/ 741 enum i40e_status_code i40e_asq_send_command(struct i40e_hw *hw, 742 struct i40e_aq_desc *desc, 743 void *buff, /* can be NULL */ 744 u16 buff_size, 745 struct i40e_asq_cmd_details *cmd_details) 746 { 747 enum i40e_status_code status = I40E_SUCCESS; 748 struct i40e_dma_mem *dma_buff = NULL; 749 struct i40e_asq_cmd_details *details; 750 struct i40e_aq_desc *desc_on_ring; 751 bool cmd_completed = FALSE; 752 u16 retval = 0; 753 u32 val = 0; 754 755 val = rd32(hw, hw->aq.asq.head); 756 if (val >= hw->aq.num_asq_entries) { 757 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 758 "AQTX: head overrun at %d\n", val); 759 status = I40E_ERR_QUEUE_EMPTY; 760 goto asq_send_command_exit; 761 } 762 763 if (hw->aq.asq.count == 0) { 764 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 765 "AQTX: Admin queue not initialized.\n"); 766 status = I40E_ERR_QUEUE_EMPTY; 767 goto asq_send_command_exit; 768 } 769 770 if (i40e_is_nvm_update_op(desc) && hw->aq.nvm_busy) { 771 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: NVM busy.\n"); 772 status = I40E_ERR_NVM; 773 goto asq_send_command_exit; 774 } 775 776 details = I40E_ADMINQ_DETAILS(hw->aq.asq, hw->aq.asq.next_to_use); 777 if (cmd_details) { 778 i40e_memcpy(details, 779 cmd_details, 780 sizeof(struct i40e_asq_cmd_details), 781 I40E_NONDMA_TO_NONDMA); 782 783 /* If the cmd_details are defined copy the cookie. The 784 * CPU_TO_LE32 is not needed here because the data is ignored 785 * by the FW, only used by the driver 786 */ 787 if (details->cookie) { 788 desc->cookie_high = 789 CPU_TO_LE32(I40E_HI_DWORD(details->cookie)); 790 desc->cookie_low = 791 CPU_TO_LE32(I40E_LO_DWORD(details->cookie)); 792 } 793 } else { 794 i40e_memset(details, 0, 795 sizeof(struct i40e_asq_cmd_details), 796 I40E_NONDMA_MEM); 797 } 798 799 /* clear requested flags and then set additional flags if defined */ 800 desc->flags &= ~CPU_TO_LE16(details->flags_dis); 801 desc->flags |= CPU_TO_LE16(details->flags_ena); 802 803 i40e_acquire_spinlock(&hw->aq.asq_spinlock); 804 805 if (buff_size > hw->aq.asq_buf_size) { 806 i40e_debug(hw, 807 I40E_DEBUG_AQ_MESSAGE, 808 "AQTX: Invalid buffer size: %d.\n", 809 buff_size); 810 status = I40E_ERR_INVALID_SIZE; 811 goto asq_send_command_error; 812 } 813 814 if (details->postpone && !details->async) { 815 i40e_debug(hw, 816 I40E_DEBUG_AQ_MESSAGE, 817 "AQTX: Async flag not set along with postpone flag"); 818 status = I40E_ERR_PARAM; 819 goto asq_send_command_error; 820 } 821 822 /* call clean and check queue available function to reclaim the 823 * descriptors that were processed by FW, the function returns the 824 * number of desc available 825 */ 826 /* the clean function called here could be called in a separate thread 827 * in case of asynchronous completions 828 */ 829 if (i40e_clean_asq(hw) == 0) { 830 i40e_debug(hw, 831 I40E_DEBUG_AQ_MESSAGE, 832 "AQTX: Error queue is full.\n"); 833 status = I40E_ERR_ADMIN_QUEUE_FULL; 834 goto asq_send_command_error; 835 } 836 837 /* initialize the temp desc pointer with the right desc */ 838 desc_on_ring = I40E_ADMINQ_DESC(hw->aq.asq, hw->aq.asq.next_to_use); 839 840 /* if the desc is available copy the temp desc to the right place */ 841 i40e_memcpy(desc_on_ring, desc, sizeof(struct i40e_aq_desc), 842 I40E_NONDMA_TO_DMA); 843 844 /* if buff is not NULL assume indirect command */ 845 if (buff != NULL) { 846 dma_buff = &(hw->aq.asq.r.asq_bi[hw->aq.asq.next_to_use]); 847 /* copy the user buff into the respective DMA buff */ 848 i40e_memcpy(dma_buff->va, buff, buff_size, 849 I40E_NONDMA_TO_DMA); 850 desc_on_ring->datalen = CPU_TO_LE16(buff_size); 851 852 /* Update the address values in the desc with the pa value 853 * for respective buffer 854 */ 855 desc_on_ring->params.external.addr_high = 856 CPU_TO_LE32(I40E_HI_DWORD(dma_buff->pa)); 857 desc_on_ring->params.external.addr_low = 858 CPU_TO_LE32(I40E_LO_DWORD(dma_buff->pa)); 859 } 860 861 /* bump the tail */ 862 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQTX: desc and buffer:\n"); 863 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc_on_ring, 864 buff, buff_size); 865 (hw->aq.asq.next_to_use)++; 866 if (hw->aq.asq.next_to_use == hw->aq.asq.count) 867 hw->aq.asq.next_to_use = 0; 868 if (!details->postpone) 869 wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use); 870 871 /* if cmd_details are not defined or async flag is not set, 872 * we need to wait for desc write back 873 */ 874 if (!details->async && !details->postpone) { 875 u32 total_delay = 0; 876 877 do { 878 /* AQ designers suggest use of head for better 879 * timing reliability than DD bit 880 */ 881 if (i40e_asq_done(hw)) 882 break; 883 /* ugh! delay while spin_lock */ 884 i40e_msec_delay(1); 885 total_delay++; 886 } while (total_delay < hw->aq.asq_cmd_timeout); 887 } 888 889 /* if ready, copy the desc back to temp */ 890 if (i40e_asq_done(hw)) { 891 i40e_memcpy(desc, desc_on_ring, sizeof(struct i40e_aq_desc), 892 I40E_DMA_TO_NONDMA); 893 if (buff != NULL) 894 i40e_memcpy(buff, dma_buff->va, buff_size, 895 I40E_DMA_TO_NONDMA); 896 retval = LE16_TO_CPU(desc->retval); 897 if (retval != 0) { 898 i40e_debug(hw, 899 I40E_DEBUG_AQ_MESSAGE, 900 "AQTX: Command completed with error 0x%X.\n", 901 retval); 902 903 /* strip off FW internal code */ 904 retval &= 0xff; 905 } 906 cmd_completed = TRUE; 907 if ((enum i40e_admin_queue_err)retval == I40E_AQ_RC_OK) 908 status = I40E_SUCCESS; 909 else 910 status = I40E_ERR_ADMIN_QUEUE_ERROR; 911 hw->aq.asq_last_status = (enum i40e_admin_queue_err)retval; 912 } 913 914 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, 915 "AQTX: desc and buffer writeback:\n"); 916 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, buff, buff_size); 917 918 /* update the error if time out occurred */ 919 if ((!cmd_completed) && 920 (!details->async && !details->postpone)) { 921 i40e_debug(hw, 922 I40E_DEBUG_AQ_MESSAGE, 923 "AQTX: Writeback timeout.\n"); 924 status = I40E_ERR_ADMIN_QUEUE_TIMEOUT; 925 } 926 927 if (!status && i40e_is_nvm_update_op(desc)) 928 hw->aq.nvm_busy = TRUE; 929 930 asq_send_command_error: 931 i40e_release_spinlock(&hw->aq.asq_spinlock); 932 asq_send_command_exit: 933 return status; 934 } 935 936 /** 937 * i40e_fill_default_direct_cmd_desc - AQ descriptor helper function 938 * @desc: pointer to the temp descriptor (non DMA mem) 939 * @opcode: the opcode can be used to decide which flags to turn off or on 940 * 941 * Fill the desc with default values 942 **/ 943 void i40e_fill_default_direct_cmd_desc(struct i40e_aq_desc *desc, 944 u16 opcode) 945 { 946 /* zero out the desc */ 947 i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), 948 I40E_NONDMA_MEM); 949 desc->opcode = CPU_TO_LE16(opcode); 950 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_SI); 951 } 952 953 /** 954 * i40e_clean_arq_element 955 * @hw: pointer to the hw struct 956 * @e: event info from the receive descriptor, includes any buffers 957 * @pending: number of events that could be left to process 958 * 959 * This function cleans one Admin Receive Queue element and returns 960 * the contents through e. It can also return how many events are 961 * left to process through 'pending' 962 **/ 963 enum i40e_status_code i40e_clean_arq_element(struct i40e_hw *hw, 964 struct i40e_arq_event_info *e, 965 u16 *pending) 966 { 967 enum i40e_status_code ret_code = I40E_SUCCESS; 968 u16 ntc = hw->aq.arq.next_to_clean; 969 struct i40e_aq_desc *desc; 970 struct i40e_dma_mem *bi; 971 u16 desc_idx; 972 u16 datalen; 973 u16 flags; 974 u16 ntu; 975 976 /* take the lock before we start messing with the ring */ 977 i40e_acquire_spinlock(&hw->aq.arq_spinlock); 978 979 /* set next_to_use to head */ 980 ntu = (rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK); 981 if (ntu == ntc) { 982 /* nothing to do - shouldn't need to update ring's values */ 983 ret_code = I40E_ERR_ADMIN_QUEUE_NO_WORK; 984 goto clean_arq_element_out; 985 } 986 987 /* now clean the next descriptor */ 988 desc = I40E_ADMINQ_DESC(hw->aq.arq, ntc); 989 desc_idx = ntc; 990 991 flags = LE16_TO_CPU(desc->flags); 992 if (flags & I40E_AQ_FLAG_ERR) { 993 ret_code = I40E_ERR_ADMIN_QUEUE_ERROR; 994 hw->aq.arq_last_status = 995 (enum i40e_admin_queue_err)LE16_TO_CPU(desc->retval); 996 i40e_debug(hw, 997 I40E_DEBUG_AQ_MESSAGE, 998 "AQRX: Event received with error 0x%X.\n", 999 hw->aq.arq_last_status); 1000 } 1001 1002 i40e_memcpy(&e->desc, desc, sizeof(struct i40e_aq_desc), 1003 I40E_DMA_TO_NONDMA); 1004 datalen = LE16_TO_CPU(desc->datalen); 1005 e->msg_len = min(datalen, e->buf_len); 1006 if (e->msg_buf != NULL && (e->msg_len != 0)) 1007 i40e_memcpy(e->msg_buf, 1008 hw->aq.arq.r.arq_bi[desc_idx].va, 1009 e->msg_len, I40E_DMA_TO_NONDMA); 1010 1011 i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE, "AQRX: desc and buffer:\n"); 1012 i40e_debug_aq(hw, I40E_DEBUG_AQ_COMMAND, (void *)desc, e->msg_buf, 1013 hw->aq.arq_buf_size); 1014 1015 /* Restore the original datalen and buffer address in the desc, 1016 * FW updates datalen to indicate the event message 1017 * size 1018 */ 1019 bi = &hw->aq.arq.r.arq_bi[ntc]; 1020 i40e_memset((void *)desc, 0, sizeof(struct i40e_aq_desc), I40E_DMA_MEM); 1021 1022 desc->flags = CPU_TO_LE16(I40E_AQ_FLAG_BUF); 1023 if (hw->aq.arq_buf_size > I40E_AQ_LARGE_BUF) 1024 desc->flags |= CPU_TO_LE16(I40E_AQ_FLAG_LB); 1025 desc->datalen = CPU_TO_LE16((u16)bi->size); 1026 desc->params.external.addr_high = CPU_TO_LE32(I40E_HI_DWORD(bi->pa)); 1027 desc->params.external.addr_low = CPU_TO_LE32(I40E_LO_DWORD(bi->pa)); 1028 1029 /* set tail = the last cleaned desc index. */ 1030 wr32(hw, hw->aq.arq.tail, ntc); 1031 /* ntc is updated to tail + 1 */ 1032 ntc++; 1033 if (ntc == hw->aq.num_arq_entries) 1034 ntc = 0; 1035 hw->aq.arq.next_to_clean = ntc; 1036 hw->aq.arq.next_to_use = ntu; 1037 1038 clean_arq_element_out: 1039 /* Set pending if needed, unlock and return */ 1040 if (pending != NULL) 1041 *pending = (ntc > ntu ? hw->aq.arq.count : 0) + (ntu - ntc); 1042 i40e_release_spinlock(&hw->aq.arq_spinlock); 1043 1044 if (i40e_is_nvm_update_op(&e->desc)) { 1045 hw->aq.nvm_busy = FALSE; 1046 if (hw->aq.nvm_release_on_done) { 1047 i40e_release_nvm(hw); 1048 hw->aq.nvm_release_on_done = FALSE; 1049 } 1050 } 1051 1052 return ret_code; 1053 } 1054 1055 void i40e_resume_aq(struct i40e_hw *hw) 1056 { 1057 /* Registers are reset after PF reset */ 1058 hw->aq.asq.next_to_use = 0; 1059 hw->aq.asq.next_to_clean = 0; 1060 1061 #if (I40E_VF_ATQLEN_ATQENABLE_MASK != I40E_PF_ATQLEN_ATQENABLE_MASK) 1062 #error I40E_VF_ATQLEN_ATQENABLE_MASK != I40E_PF_ATQLEN_ATQENABLE_MASK 1063 #endif 1064 i40e_config_asq_regs(hw); 1065 1066 hw->aq.arq.next_to_use = 0; 1067 hw->aq.arq.next_to_clean = 0; 1068 1069 i40e_config_arq_regs(hw); 1070 } 1071