xref: /freebsd/sys/dev/ixgbe/ixgbe_x540.c (revision a03411e84728e9b267056fd31c7d1d9d1dc1b01e)
1 /******************************************************************************
2   SPDX-License-Identifier: BSD-3-Clause
3 
4   Copyright (c) 2001-2020, Intel Corporation
5   All rights reserved.
6 
7   Redistribution and use in source and binary forms, with or without
8   modification, are permitted provided that the following conditions are met:
9 
10    1. Redistributions of source code must retain the above copyright notice,
11       this list of conditions and the following disclaimer.
12 
13    2. Redistributions in binary form must reproduce the above copyright
14       notice, this list of conditions and the following disclaimer in the
15       documentation and/or other materials provided with the distribution.
16 
17    3. Neither the name of the Intel Corporation nor the names of its
18       contributors may be used to endorse or promote products derived from
19       this software without specific prior written permission.
20 
21   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
25   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31   POSSIBILITY OF SUCH DAMAGE.
32 
33 ******************************************************************************/
34 
35 #include "ixgbe_x540.h"
36 #include "ixgbe_type.h"
37 #include "ixgbe_api.h"
38 #include "ixgbe_common.h"
39 #include "ixgbe_phy.h"
40 
41 #define IXGBE_X540_MAX_TX_QUEUES	128
42 #define IXGBE_X540_MAX_RX_QUEUES	128
43 #define IXGBE_X540_RAR_ENTRIES		128
44 #define IXGBE_X540_MC_TBL_SIZE		128
45 #define IXGBE_X540_VFT_TBL_SIZE		128
46 #define IXGBE_X540_RX_PB_SIZE		384
47 
48 static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
49 static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
50 static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
51 
52 /**
53  * ixgbe_init_ops_X540 - Inits func ptrs and MAC type
54  * @hw: pointer to hardware structure
55  *
56  * Initialize the function pointers and assign the MAC type for X540.
57  * Does not touch the hardware.
58  **/
59 s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
60 {
61 	struct ixgbe_mac_info *mac = &hw->mac;
62 	struct ixgbe_phy_info *phy = &hw->phy;
63 	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
64 	s32 ret_val;
65 
66 	DEBUGFUNC("ixgbe_init_ops_X540");
67 
68 	ret_val = ixgbe_init_phy_ops_generic(hw);
69 	ret_val = ixgbe_init_ops_generic(hw);
70 
71 
72 	/* EEPROM */
73 	eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
74 	eeprom->ops.read = ixgbe_read_eerd_X540;
75 	eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_X540;
76 	eeprom->ops.write = ixgbe_write_eewr_X540;
77 	eeprom->ops.write_buffer = ixgbe_write_eewr_buffer_X540;
78 	eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X540;
79 	eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X540;
80 	eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X540;
81 
82 	/* PHY */
83 	phy->ops.init = ixgbe_init_phy_ops_generic;
84 	phy->ops.reset = NULL;
85 	phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
86 
87 	/* MAC */
88 	mac->ops.reset_hw = ixgbe_reset_hw_X540;
89 	mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
90 	mac->ops.get_media_type = ixgbe_get_media_type_X540;
91 	mac->ops.get_supported_physical_layer =
92 				    ixgbe_get_supported_physical_layer_X540;
93 	mac->ops.read_analog_reg8 = NULL;
94 	mac->ops.write_analog_reg8 = NULL;
95 	mac->ops.start_hw = ixgbe_start_hw_X540;
96 	mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
97 	mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
98 	mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
99 	mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
100 	mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
101 	mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X540;
102 	mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X540;
103 	mac->ops.init_swfw_sync = ixgbe_init_swfw_sync_X540;
104 	mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
105 	mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
106 
107 	/* RAR, Multicast, VLAN */
108 	mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
109 	mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
110 	mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
111 	mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
112 	mac->rar_highwater = 1;
113 	mac->ops.set_vfta = ixgbe_set_vfta_generic;
114 	mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
115 	mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
116 	mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
117 	mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
118 	mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
119 
120 	/* Link */
121 	mac->ops.get_link_capabilities =
122 				ixgbe_get_copper_link_capabilities_generic;
123 	mac->ops.setup_link = ixgbe_setup_mac_link_X540;
124 	mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
125 	mac->ops.check_link = ixgbe_check_mac_link_generic;
126 	mac->ops.bypass_rw = ixgbe_bypass_rw_generic;
127 	mac->ops.bypass_valid_rd = ixgbe_bypass_valid_rd_generic;
128 	mac->ops.bypass_set = ixgbe_bypass_set_generic;
129 	mac->ops.bypass_rd_eep = ixgbe_bypass_rd_eep_generic;
130 
131 
132 	mac->mcft_size		= IXGBE_X540_MC_TBL_SIZE;
133 	mac->vft_size		= IXGBE_X540_VFT_TBL_SIZE;
134 	mac->num_rar_entries	= IXGBE_X540_RAR_ENTRIES;
135 	mac->rx_pb_size		= IXGBE_X540_RX_PB_SIZE;
136 	mac->max_rx_queues	= IXGBE_X540_MAX_RX_QUEUES;
137 	mac->max_tx_queues	= IXGBE_X540_MAX_TX_QUEUES;
138 	mac->max_msix_vectors	= ixgbe_get_pcie_msix_count_generic(hw);
139 
140 	/*
141 	 * FWSM register
142 	 * ARC supported; valid only if manageability features are
143 	 * enabled.
144 	 */
145 	mac->arc_subsystem_valid = !!(IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw))
146 				     & IXGBE_FWSM_MODE_MASK);
147 
148 	hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
149 
150 	/* LEDs */
151 	mac->ops.blink_led_start = ixgbe_blink_led_start_X540;
152 	mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540;
153 
154 	/* Manageability interface */
155 	mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
156 
157 	mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
158 
159 	return ret_val;
160 }
161 
162 /**
163  * ixgbe_get_link_capabilities_X540 - Determines link capabilities
164  * @hw: pointer to hardware structure
165  * @speed: pointer to link speed
166  * @autoneg: true when autoneg or autotry is enabled
167  *
168  * Determines the link capabilities by reading the AUTOC register.
169  **/
170 s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
171 				     ixgbe_link_speed *speed,
172 				     bool *autoneg)
173 {
174 	ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg);
175 
176 	return IXGBE_SUCCESS;
177 }
178 
179 /**
180  * ixgbe_get_media_type_X540 - Get media type
181  * @hw: pointer to hardware structure
182  *
183  * Returns the media type (fiber, copper, backplane)
184  **/
185 enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
186 {
187 	UNREFERENCED_1PARAMETER(hw);
188 	return ixgbe_media_type_copper;
189 }
190 
191 /**
192  * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
193  * @hw: pointer to hardware structure
194  * @speed: new link speed
195  * @autoneg_wait_to_complete: true when waiting for completion is needed
196  **/
197 s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
198 			      ixgbe_link_speed speed,
199 			      bool autoneg_wait_to_complete)
200 {
201 	DEBUGFUNC("ixgbe_setup_mac_link_X540");
202 	return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
203 }
204 
205 /**
206  * ixgbe_reset_hw_X540 - Perform hardware reset
207  * @hw: pointer to hardware structure
208  *
209  * Resets the hardware by resetting the transmit and receive units, masks
210  * and clears all interrupts, and perform a reset.
211  **/
212 s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
213 {
214 	s32 status;
215 	u32 ctrl, i;
216 	u32 swfw_mask = hw->phy.phy_semaphore_mask;
217 
218 	DEBUGFUNC("ixgbe_reset_hw_X540");
219 
220 	/* Call adapter stop to disable tx/rx and clear interrupts */
221 	status = hw->mac.ops.stop_adapter(hw);
222 	if (status != IXGBE_SUCCESS)
223 		goto reset_hw_out;
224 
225 	/* flush pending Tx transactions */
226 	ixgbe_clear_tx_pending(hw);
227 
228 mac_reset_top:
229 	status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
230 	if (status != IXGBE_SUCCESS) {
231 		ERROR_REPORT2(IXGBE_ERROR_CAUTION,
232 			"semaphore failed with %d", status);
233 		return IXGBE_ERR_SWFW_SYNC;
234 	}
235 	ctrl = IXGBE_CTRL_RST;
236 	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
237 	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
238 	IXGBE_WRITE_FLUSH(hw);
239 	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
240 
241 	/* Poll for reset bit to self-clear indicating reset is complete */
242 	for (i = 0; i < 10; i++) {
243 		usec_delay(1);
244 		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
245 		if (!(ctrl & IXGBE_CTRL_RST_MASK))
246 			break;
247 	}
248 
249 	if (ctrl & IXGBE_CTRL_RST_MASK) {
250 		status = IXGBE_ERR_RESET_FAILED;
251 		ERROR_REPORT1(IXGBE_ERROR_POLLING,
252 			     "Reset polling failed to complete.\n");
253 	}
254 	msec_delay(100);
255 
256 	/*
257 	 * Double resets are required for recovery from certain error
258 	 * conditions.  Between resets, it is necessary to stall to allow time
259 	 * for any pending HW events to complete.
260 	 */
261 	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
262 		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
263 		goto mac_reset_top;
264 	}
265 
266 	/* Set the Rx packet buffer size. */
267 	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
268 
269 	/* Store the permanent mac address */
270 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
271 
272 	/*
273 	 * Store MAC address from RAR0, clear receive address registers, and
274 	 * clear the multicast table.  Also reset num_rar_entries to 128,
275 	 * since we modify this value when programming the SAN MAC address.
276 	 */
277 	hw->mac.num_rar_entries = 128;
278 	hw->mac.ops.init_rx_addrs(hw);
279 
280 	/* Store the permanent SAN mac address */
281 	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
282 
283 	/* Add the SAN MAC address to the RAR only if it's a valid address */
284 	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
285 		/* Save the SAN MAC RAR index */
286 		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
287 
288 		hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index,
289 				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
290 
291 		/* clear VMDq pool/queue selection for this RAR */
292 		hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index,
293 				       IXGBE_CLEAR_VMDQ_ALL);
294 
295 		/* Reserve the last RAR for the SAN MAC address */
296 		hw->mac.num_rar_entries--;
297 	}
298 
299 	/* Store the alternative WWNN/WWPN prefix */
300 	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
301 				   &hw->mac.wwpn_prefix);
302 
303 reset_hw_out:
304 	return status;
305 }
306 
307 /**
308  * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
309  * @hw: pointer to hardware structure
310  *
311  * Starts the hardware using the generic start_hw function
312  * and the generation start_hw function.
313  * Then performs revision-specific operations, if any.
314  **/
315 s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
316 {
317 	s32 ret_val = IXGBE_SUCCESS;
318 
319 	DEBUGFUNC("ixgbe_start_hw_X540");
320 
321 	ret_val = ixgbe_start_hw_generic(hw);
322 	if (ret_val != IXGBE_SUCCESS)
323 		goto out;
324 
325 	ixgbe_start_hw_gen2(hw);
326 
327 out:
328 	return ret_val;
329 }
330 
331 /**
332  * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
333  * @hw: pointer to hardware structure
334  *
335  * Determines physical layer capabilities of the current configuration.
336  **/
337 u64 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
338 {
339 	u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
340 	u16 ext_ability = 0;
341 
342 	DEBUGFUNC("ixgbe_get_supported_physical_layer_X540");
343 
344 	hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
345 	IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
346 	if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
347 		physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
348 	if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
349 		physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
350 	if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
351 		physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
352 
353 	return physical_layer;
354 }
355 
356 /**
357  * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
358  * @hw: pointer to hardware structure
359  *
360  * Initializes the EEPROM parameters ixgbe_eeprom_info within the
361  * ixgbe_hw struct in order to set up EEPROM access.
362  **/
363 s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
364 {
365 	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
366 	u32 eec;
367 	u16 eeprom_size;
368 
369 	DEBUGFUNC("ixgbe_init_eeprom_params_X540");
370 
371 	if (eeprom->type == ixgbe_eeprom_uninitialized) {
372 		eeprom->semaphore_delay = 10;
373 		eeprom->type = ixgbe_flash;
374 
375 		eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
376 		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
377 				    IXGBE_EEC_SIZE_SHIFT);
378 		eeprom->word_size = 1 << (eeprom_size +
379 					  IXGBE_EEPROM_WORD_SIZE_SHIFT);
380 
381 		DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
382 			  eeprom->type, eeprom->word_size);
383 	}
384 
385 	return IXGBE_SUCCESS;
386 }
387 
388 /**
389  * ixgbe_read_eerd_X540- Read EEPROM word using EERD
390  * @hw: pointer to hardware structure
391  * @offset: offset of  word in the EEPROM to read
392  * @data: word read from the EEPROM
393  *
394  * Reads a 16 bit word from the EEPROM using the EERD register.
395  **/
396 s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
397 {
398 	s32 status = IXGBE_SUCCESS;
399 
400 	DEBUGFUNC("ixgbe_read_eerd_X540");
401 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
402 	    IXGBE_SUCCESS) {
403 		status = ixgbe_read_eerd_generic(hw, offset, data);
404 		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
405 	} else {
406 		status = IXGBE_ERR_SWFW_SYNC;
407 	}
408 
409 	return status;
410 }
411 
412 /**
413  * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
414  * @hw: pointer to hardware structure
415  * @offset: offset of  word in the EEPROM to read
416  * @words: number of words
417  * @data: word(s) read from the EEPROM
418  *
419  * Reads a 16 bit word(s) from the EEPROM using the EERD register.
420  **/
421 s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
422 				u16 offset, u16 words, u16 *data)
423 {
424 	s32 status = IXGBE_SUCCESS;
425 
426 	DEBUGFUNC("ixgbe_read_eerd_buffer_X540");
427 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
428 	    IXGBE_SUCCESS) {
429 		status = ixgbe_read_eerd_buffer_generic(hw, offset,
430 							words, data);
431 		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
432 	} else {
433 		status = IXGBE_ERR_SWFW_SYNC;
434 	}
435 
436 	return status;
437 }
438 
439 /**
440  * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
441  * @hw: pointer to hardware structure
442  * @offset: offset of  word in the EEPROM to write
443  * @data: word write to the EEPROM
444  *
445  * Write a 16 bit word to the EEPROM using the EEWR register.
446  **/
447 s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
448 {
449 	s32 status = IXGBE_SUCCESS;
450 
451 	DEBUGFUNC("ixgbe_write_eewr_X540");
452 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
453 	    IXGBE_SUCCESS) {
454 		status = ixgbe_write_eewr_generic(hw, offset, data);
455 		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
456 	} else {
457 		status = IXGBE_ERR_SWFW_SYNC;
458 	}
459 
460 	return status;
461 }
462 
463 /**
464  * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
465  * @hw: pointer to hardware structure
466  * @offset: offset of  word in the EEPROM to write
467  * @words: number of words
468  * @data: word(s) write to the EEPROM
469  *
470  * Write a 16 bit word(s) to the EEPROM using the EEWR register.
471  **/
472 s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
473 				 u16 offset, u16 words, u16 *data)
474 {
475 	s32 status = IXGBE_SUCCESS;
476 
477 	DEBUGFUNC("ixgbe_write_eewr_buffer_X540");
478 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
479 	    IXGBE_SUCCESS) {
480 		status = ixgbe_write_eewr_buffer_generic(hw, offset,
481 							 words, data);
482 		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
483 	} else {
484 		status = IXGBE_ERR_SWFW_SYNC;
485 	}
486 
487 	return status;
488 }
489 
490 /**
491  * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
492  *
493  * This function does not use synchronization for EERD and EEWR. It can
494  * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
495  *
496  * @hw: pointer to hardware structure
497  *
498  * Returns a negative error code on error, or the 16-bit checksum
499  **/
500 s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
501 {
502 	u16 i, j;
503 	u16 checksum = 0;
504 	u16 length = 0;
505 	u16 pointer = 0;
506 	u16 word = 0;
507 	u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
508 
509 	/* Do not use hw->eeprom.ops.read because we do not want to take
510 	 * the synchronization semaphores here. Instead use
511 	 * ixgbe_read_eerd_generic
512 	 */
513 
514 	DEBUGFUNC("ixgbe_calc_eeprom_checksum_X540");
515 
516 	/* Include 0x0 up to IXGBE_EEPROM_CHECKSUM; do not include the
517 	 * checksum itself
518 	 */
519 	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
520 		if (ixgbe_read_eerd_generic(hw, i, &word)) {
521 			DEBUGOUT("EEPROM read failed\n");
522 			return IXGBE_ERR_EEPROM;
523 		}
524 		checksum += word;
525 	}
526 
527 	/* Include all data from pointers 0x3, 0x6-0xE.  This excludes the
528 	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
529 	 */
530 	for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
531 		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
532 			continue;
533 
534 		if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
535 			DEBUGOUT("EEPROM read failed\n");
536 			return IXGBE_ERR_EEPROM;
537 		}
538 
539 		/* Skip pointer section if the pointer is invalid. */
540 		if (pointer == 0xFFFF || pointer == 0 ||
541 		    pointer >= hw->eeprom.word_size)
542 			continue;
543 
544 		if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
545 			DEBUGOUT("EEPROM read failed\n");
546 			return IXGBE_ERR_EEPROM;
547 		}
548 
549 		/* Skip pointer section if length is invalid. */
550 		if (length == 0xFFFF || length == 0 ||
551 		    (pointer + length) >= hw->eeprom.word_size)
552 			continue;
553 
554 		for (j = pointer + 1; j <= pointer + length; j++) {
555 			if (ixgbe_read_eerd_generic(hw, j, &word)) {
556 				DEBUGOUT("EEPROM read failed\n");
557 				return IXGBE_ERR_EEPROM;
558 			}
559 			checksum += word;
560 		}
561 	}
562 
563 	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
564 
565 	return (s32)checksum;
566 }
567 
568 /**
569  * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
570  * @hw: pointer to hardware structure
571  * @checksum_val: calculated checksum
572  *
573  * Performs checksum calculation and validates the EEPROM checksum.  If the
574  * caller does not need checksum_val, the value can be NULL.
575  **/
576 s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
577 					u16 *checksum_val)
578 {
579 	s32 status;
580 	u16 checksum;
581 	u16 read_checksum = 0;
582 
583 	DEBUGFUNC("ixgbe_validate_eeprom_checksum_X540");
584 
585 	/* Read the first word from the EEPROM. If this times out or fails, do
586 	 * not continue or we could be in for a very long wait while every
587 	 * EEPROM read fails
588 	 */
589 	status = hw->eeprom.ops.read(hw, 0, &checksum);
590 	if (status) {
591 		DEBUGOUT("EEPROM read failed\n");
592 		return status;
593 	}
594 
595 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
596 		return IXGBE_ERR_SWFW_SYNC;
597 
598 	status = hw->eeprom.ops.calc_checksum(hw);
599 	if (status < 0)
600 		goto out;
601 
602 	checksum = (u16)(status & 0xffff);
603 
604 	/* Do not use hw->eeprom.ops.read because we do not want to take
605 	 * the synchronization semaphores twice here.
606 	 */
607 	status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
608 					 &read_checksum);
609 	if (status)
610 		goto out;
611 
612 	/* Verify read checksum from EEPROM is the same as
613 	 * calculated checksum
614 	 */
615 	if (read_checksum != checksum) {
616 		ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
617 			     "Invalid EEPROM checksum");
618 		status = IXGBE_ERR_EEPROM_CHECKSUM;
619 	}
620 
621 	/* If the user cares, return the calculated checksum */
622 	if (checksum_val)
623 		*checksum_val = checksum;
624 
625 out:
626 	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
627 
628 	return status;
629 }
630 
631 /**
632  * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
633  * @hw: pointer to hardware structure
634  *
635  * After writing EEPROM to shadow RAM using EEWR register, software calculates
636  * checksum and updates the EEPROM and instructs the hardware to update
637  * the flash.
638  **/
639 s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
640 {
641 	s32 status;
642 	u16 checksum;
643 
644 	DEBUGFUNC("ixgbe_update_eeprom_checksum_X540");
645 
646 	/* Read the first word from the EEPROM. If this times out or fails, do
647 	 * not continue or we could be in for a very long wait while every
648 	 * EEPROM read fails
649 	 */
650 	status = hw->eeprom.ops.read(hw, 0, &checksum);
651 	if (status) {
652 		DEBUGOUT("EEPROM read failed\n");
653 		return status;
654 	}
655 
656 	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
657 		return IXGBE_ERR_SWFW_SYNC;
658 
659 	status = hw->eeprom.ops.calc_checksum(hw);
660 	if (status < 0)
661 		goto out;
662 
663 	checksum = (u16)(status & 0xffff);
664 
665 	/* Do not use hw->eeprom.ops.write because we do not want to
666 	 * take the synchronization semaphores twice here.
667 	 */
668 	status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
669 	if (status)
670 		goto out;
671 
672 	status = ixgbe_update_flash_X540(hw);
673 
674 out:
675 	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
676 
677 	return status;
678 }
679 
680 /**
681  * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
682  * @hw: pointer to hardware structure
683  *
684  * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
685  * EEPROM from shadow RAM to the flash device.
686  **/
687 s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
688 {
689 	u32 flup;
690 	s32 status;
691 
692 	DEBUGFUNC("ixgbe_update_flash_X540");
693 
694 	status = ixgbe_poll_flash_update_done_X540(hw);
695 	if (status == IXGBE_ERR_EEPROM) {
696 		DEBUGOUT("Flash update time out\n");
697 		goto out;
698 	}
699 
700 	flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw)) | IXGBE_EEC_FLUP;
701 	IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
702 
703 	status = ixgbe_poll_flash_update_done_X540(hw);
704 	if (status == IXGBE_SUCCESS)
705 		DEBUGOUT("Flash update complete\n");
706 	else
707 		DEBUGOUT("Flash update time out\n");
708 
709 	if (hw->mac.type == ixgbe_mac_X540 && hw->revision_id == 0) {
710 		flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
711 
712 		if (flup & IXGBE_EEC_SEC1VAL) {
713 			flup |= IXGBE_EEC_FLUP;
714 			IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
715 		}
716 
717 		status = ixgbe_poll_flash_update_done_X540(hw);
718 		if (status == IXGBE_SUCCESS)
719 			DEBUGOUT("Flash update complete\n");
720 		else
721 			DEBUGOUT("Flash update time out\n");
722 	}
723 out:
724 	return status;
725 }
726 
727 /**
728  * ixgbe_poll_flash_update_done_X540 - Poll flash update status
729  * @hw: pointer to hardware structure
730  *
731  * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
732  * flash update is done.
733  **/
734 static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
735 {
736 	u32 i;
737 	u32 reg;
738 	s32 status = IXGBE_ERR_EEPROM;
739 
740 	DEBUGFUNC("ixgbe_poll_flash_update_done_X540");
741 
742 	for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
743 		reg = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
744 		if (reg & IXGBE_EEC_FLUDONE) {
745 			status = IXGBE_SUCCESS;
746 			break;
747 		}
748 		msec_delay(5);
749 	}
750 
751 	if (i == IXGBE_FLUDONE_ATTEMPTS)
752 		ERROR_REPORT1(IXGBE_ERROR_POLLING,
753 			     "Flash update status polling timed out");
754 
755 	return status;
756 }
757 
758 /**
759  * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
760  * @hw: pointer to hardware structure
761  * @mask: Mask to specify which semaphore to acquire
762  *
763  * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
764  * the specified function (CSR, PHY0, PHY1, NVM, Flash)
765  **/
766 s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
767 {
768 	u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK;
769 	u32 fwmask = swmask << 5;
770 	u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK;
771 	u32 timeout = 200;
772 	u32 hwmask = 0;
773 	u32 swfw_sync;
774 	u32 i;
775 
776 	DEBUGFUNC("ixgbe_acquire_swfw_sync_X540");
777 
778 	if (swmask & IXGBE_GSSR_EEP_SM)
779 		hwmask |= IXGBE_GSSR_FLASH_SM;
780 
781 	/* SW only mask doesn't have FW bit pair */
782 	if (mask & IXGBE_GSSR_SW_MNG_SM)
783 		swmask |= IXGBE_GSSR_SW_MNG_SM;
784 
785 	swmask |= swi2c_mask;
786 	fwmask |= swi2c_mask << 2;
787 	if (hw->mac.type >= ixgbe_mac_X550)
788 		timeout = 1000;
789 
790 	for (i = 0; i < timeout; i++) {
791 		/* SW NVM semaphore bit is used for access to all
792 		 * SW_FW_SYNC bits (not just NVM)
793 		 */
794 		if (ixgbe_get_swfw_sync_semaphore(hw)) {
795 			DEBUGOUT("Failed to get NVM access and register semaphore, returning IXGBE_ERR_SWFW_SYNC\n");
796 			return IXGBE_ERR_SWFW_SYNC;
797 		}
798 
799 		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
800 		if (!(swfw_sync & (fwmask | swmask | hwmask))) {
801 			swfw_sync |= swmask;
802 			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw),
803 					swfw_sync);
804 			ixgbe_release_swfw_sync_semaphore(hw);
805 			return IXGBE_SUCCESS;
806 		}
807 		/* Firmware currently using resource (fwmask), hardware
808 		 * currently using resource (hwmask), or other software
809 		 * thread currently using resource (swmask)
810 		 */
811 		ixgbe_release_swfw_sync_semaphore(hw);
812 		msec_delay(5);
813 	}
814 
815 	/* If the resource is not released by the FW/HW the SW can assume that
816 	 * the FW/HW malfunctions. In that case the SW should set the SW bit(s)
817 	 * of the requested resource(s) while ignoring the corresponding FW/HW
818 	 * bits in the SW_FW_SYNC register.
819 	 */
820 	if (ixgbe_get_swfw_sync_semaphore(hw)) {
821 		DEBUGOUT("Failed to get NVM semaphore and register semaphore while forcefully ignoring FW semaphore bit(s) and setting SW semaphore bit(s), returning IXGBE_ERR_SWFW_SYNC\n");
822 		return IXGBE_ERR_SWFW_SYNC;
823 	}
824 	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
825 	if (swfw_sync & (fwmask | hwmask)) {
826 		swfw_sync |= swmask;
827 		IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
828 		ixgbe_release_swfw_sync_semaphore(hw);
829 		msec_delay(5);
830 		return IXGBE_SUCCESS;
831 	}
832 	/* If the resource is not released by other SW the SW can assume that
833 	 * the other SW malfunctions. In that case the SW should clear all SW
834 	 * flags that it does not own and then repeat the whole process once
835 	 * again.
836 	 */
837 	if (swfw_sync & swmask) {
838 		u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
839 			    IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM |
840 			    IXGBE_GSSR_SW_MNG_SM;
841 
842 		if (swi2c_mask)
843 			rmask |= IXGBE_GSSR_I2C_MASK;
844 		ixgbe_release_swfw_sync_X540(hw, rmask);
845 		ixgbe_release_swfw_sync_semaphore(hw);
846 		DEBUGOUT("Resource not released by other SW, returning IXGBE_ERR_SWFW_SYNC\n");
847 		return IXGBE_ERR_SWFW_SYNC;
848 	}
849 	ixgbe_release_swfw_sync_semaphore(hw);
850 	DEBUGOUT("Returning error IXGBE_ERR_SWFW_SYNC\n");
851 
852 	return IXGBE_ERR_SWFW_SYNC;
853 }
854 
855 /**
856  * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
857  * @hw: pointer to hardware structure
858  * @mask: Mask to specify which semaphore to release
859  *
860  * Releases the SWFW semaphore through the SW_FW_SYNC register
861  * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
862  **/
863 void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
864 {
865 	u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM);
866 	u32 swfw_sync;
867 
868 	DEBUGFUNC("ixgbe_release_swfw_sync_X540");
869 
870 	if (mask & IXGBE_GSSR_I2C_MASK)
871 		swmask |= mask & IXGBE_GSSR_I2C_MASK;
872 	ixgbe_get_swfw_sync_semaphore(hw);
873 
874 	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
875 	swfw_sync &= ~swmask;
876 	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
877 
878 	ixgbe_release_swfw_sync_semaphore(hw);
879 	msec_delay(2);
880 }
881 
882 /**
883  * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
884  * @hw: pointer to hardware structure
885  *
886  * Sets the hardware semaphores so SW/FW can gain control of shared resources
887  **/
888 static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
889 {
890 	s32 status = IXGBE_ERR_EEPROM;
891 	u32 timeout = 2000;
892 	u32 i;
893 	u32 swsm;
894 
895 	DEBUGFUNC("ixgbe_get_swfw_sync_semaphore");
896 
897 	/* Get SMBI software semaphore between device drivers first */
898 	for (i = 0; i < timeout; i++) {
899 		/*
900 		 * If the SMBI bit is 0 when we read it, then the bit will be
901 		 * set and we have the semaphore
902 		 */
903 		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
904 		if (!(swsm & IXGBE_SWSM_SMBI)) {
905 			status = IXGBE_SUCCESS;
906 			break;
907 		}
908 		usec_delay(50);
909 	}
910 
911 	/* Now get the semaphore between SW/FW through the REGSMP bit */
912 	if (status == IXGBE_SUCCESS) {
913 		for (i = 0; i < timeout; i++) {
914 			swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
915 			if (!(swsm & IXGBE_SWFW_REGSMP))
916 				break;
917 
918 			usec_delay(50);
919 		}
920 
921 		/*
922 		 * Release semaphores and return error if SW NVM semaphore
923 		 * was not granted because we don't have access to the EEPROM
924 		 */
925 		if (i >= timeout) {
926 			ERROR_REPORT1(IXGBE_ERROR_POLLING,
927 				"REGSMP Software NVM semaphore not granted.\n");
928 			ixgbe_release_swfw_sync_semaphore(hw);
929 			status = IXGBE_ERR_EEPROM;
930 		}
931 	} else {
932 		ERROR_REPORT1(IXGBE_ERROR_POLLING,
933 			     "Software semaphore SMBI between device drivers "
934 			     "not granted.\n");
935 	}
936 
937 	return status;
938 }
939 
940 /**
941  * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
942  * @hw: pointer to hardware structure
943  *
944  * This function clears hardware semaphore bits.
945  **/
946 static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
947 {
948 	u32 swsm;
949 
950 	DEBUGFUNC("ixgbe_release_swfw_sync_semaphore");
951 
952 	/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
953 
954 	swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
955 	swsm &= ~IXGBE_SWFW_REGSMP;
956 	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swsm);
957 
958 	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
959 	swsm &= ~IXGBE_SWSM_SMBI;
960 	IXGBE_WRITE_REG(hw, IXGBE_SWSM_BY_MAC(hw), swsm);
961 
962 	IXGBE_WRITE_FLUSH(hw);
963 }
964 
965 /**
966  * ixgbe_init_swfw_sync_X540 - Release hardware semaphore
967  * @hw: pointer to hardware structure
968  *
969  * This function reset hardware semaphore bits for a semaphore that may
970  * have be left locked due to a catastrophic failure.
971  **/
972 void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw)
973 {
974 	u32 rmask;
975 
976 	/* First try to grab the semaphore but we don't need to bother
977 	 * looking to see whether we got the lock or not since we do
978 	 * the same thing regardless of whether we got the lock or not.
979 	 * We got the lock - we release it.
980 	 * We timeout trying to get the lock - we force its release.
981 	 */
982 	ixgbe_get_swfw_sync_semaphore(hw);
983 	ixgbe_release_swfw_sync_semaphore(hw);
984 
985 	/* Acquire and release all software resources. */
986 	rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
987 		IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM |
988 		IXGBE_GSSR_SW_MNG_SM;
989 
990 	rmask |= IXGBE_GSSR_I2C_MASK;
991 	ixgbe_acquire_swfw_sync_X540(hw, rmask);
992 	ixgbe_release_swfw_sync_X540(hw, rmask);
993 }
994 
995 /**
996  * ixgbe_blink_led_start_X540 - Blink LED based on index.
997  * @hw: pointer to hardware structure
998  * @index: led number to blink
999  *
1000  * Devices that implement the version 2 interface:
1001  *  X540
1002  **/
1003 s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
1004 {
1005 	u32 macc_reg;
1006 	u32 ledctl_reg;
1007 	ixgbe_link_speed speed;
1008 	bool link_up;
1009 
1010 	DEBUGFUNC("ixgbe_blink_led_start_X540");
1011 
1012 	if (index > 3)
1013 		return IXGBE_ERR_PARAM;
1014 
1015 	/*
1016 	 * Link should be up in order for the blink bit in the LED control
1017 	 * register to work. Force link and speed in the MAC if link is down.
1018 	 * This will be reversed when we stop the blinking.
1019 	 */
1020 	hw->mac.ops.check_link(hw, &speed, &link_up, false);
1021 	if (link_up == false) {
1022 		macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
1023 		macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
1024 		IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
1025 	}
1026 	/* Set the LED to LINK_UP + BLINK. */
1027 	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
1028 	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
1029 	ledctl_reg |= IXGBE_LED_BLINK(index);
1030 	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
1031 	IXGBE_WRITE_FLUSH(hw);
1032 
1033 	return IXGBE_SUCCESS;
1034 }
1035 
1036 /**
1037  * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
1038  * @hw: pointer to hardware structure
1039  * @index: led number to stop blinking
1040  *
1041  * Devices that implement the version 2 interface:
1042  *  X540
1043  **/
1044 s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
1045 {
1046 	u32 macc_reg;
1047 	u32 ledctl_reg;
1048 
1049 	if (index > 3)
1050 		return IXGBE_ERR_PARAM;
1051 
1052 	DEBUGFUNC("ixgbe_blink_led_stop_X540");
1053 
1054 	/* Restore the LED to its default value. */
1055 	ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
1056 	ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
1057 	ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
1058 	ledctl_reg &= ~IXGBE_LED_BLINK(index);
1059 	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
1060 
1061 	/* Unforce link and speed in the MAC. */
1062 	macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
1063 	macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
1064 	IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
1065 	IXGBE_WRITE_FLUSH(hw);
1066 
1067 	return IXGBE_SUCCESS;
1068 }
1069