1 /****************************************************************************** 2 3 Copyright (c) 2001-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD$*/ 34 35 #include "ixgbe_type.h" 36 #include "ixgbe_82599.h" 37 #include "ixgbe_api.h" 38 #include "ixgbe_common.h" 39 #include "ixgbe_phy.h" 40 41 #define IXGBE_82599_MAX_TX_QUEUES 128 42 #define IXGBE_82599_MAX_RX_QUEUES 128 43 #define IXGBE_82599_RAR_ENTRIES 128 44 #define IXGBE_82599_MC_TBL_SIZE 128 45 #define IXGBE_82599_VFT_TBL_SIZE 128 46 #define IXGBE_82599_RX_PB_SIZE 512 47 48 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, 49 ixgbe_link_speed speed, 50 bool autoneg_wait_to_complete); 51 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); 52 static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, 53 u16 offset, u16 *data); 54 static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, 55 u16 words, u16 *data); 56 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 57 u8 dev_addr, u8 *data); 58 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 59 u8 dev_addr, u8 data); 60 61 void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) 62 { 63 struct ixgbe_mac_info *mac = &hw->mac; 64 65 DEBUGFUNC("ixgbe_init_mac_link_ops_82599"); 66 67 /* 68 * enable the laser control functions for SFP+ fiber 69 * and MNG not enabled 70 */ 71 if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) && 72 !ixgbe_mng_enabled(hw)) { 73 mac->ops.disable_tx_laser = 74 ixgbe_disable_tx_laser_multispeed_fiber; 75 mac->ops.enable_tx_laser = 76 ixgbe_enable_tx_laser_multispeed_fiber; 77 mac->ops.flap_tx_laser = ixgbe_flap_tx_laser_multispeed_fiber; 78 79 } else { 80 mac->ops.disable_tx_laser = NULL; 81 mac->ops.enable_tx_laser = NULL; 82 mac->ops.flap_tx_laser = NULL; 83 } 84 85 if (hw->phy.multispeed_fiber) { 86 /* Set up dual speed SFP+ support */ 87 mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; 88 mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599; 89 mac->ops.set_rate_select_speed = 90 ixgbe_set_hard_rate_select_speed; 91 if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber_fixed) 92 mac->ops.set_rate_select_speed = 93 ixgbe_set_soft_rate_select_speed; 94 } else { 95 if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) && 96 (hw->phy.smart_speed == ixgbe_smart_speed_auto || 97 hw->phy.smart_speed == ixgbe_smart_speed_on) && 98 !ixgbe_verify_lesm_fw_enabled_82599(hw)) { 99 mac->ops.setup_link = ixgbe_setup_mac_link_smartspeed; 100 } else { 101 mac->ops.setup_link = ixgbe_setup_mac_link_82599; 102 } 103 } 104 } 105 106 /** 107 * ixgbe_init_phy_ops_82599 - PHY/SFP specific init 108 * @hw: pointer to hardware structure 109 * 110 * Initialize any function pointers that were not able to be 111 * set during init_shared_code because the PHY/SFP type was 112 * not known. Perform the SFP init if necessary. 113 * 114 **/ 115 s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) 116 { 117 struct ixgbe_mac_info *mac = &hw->mac; 118 struct ixgbe_phy_info *phy = &hw->phy; 119 s32 ret_val = IXGBE_SUCCESS; 120 u32 esdp; 121 122 DEBUGFUNC("ixgbe_init_phy_ops_82599"); 123 124 if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { 125 /* Store flag indicating I2C bus access control unit. */ 126 hw->phy.qsfp_shared_i2c_bus = TRUE; 127 128 /* Initialize access to QSFP+ I2C bus */ 129 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 130 esdp |= IXGBE_ESDP_SDP0_DIR; 131 esdp &= ~IXGBE_ESDP_SDP1_DIR; 132 esdp &= ~IXGBE_ESDP_SDP0; 133 esdp &= ~IXGBE_ESDP_SDP0_NATIVE; 134 esdp &= ~IXGBE_ESDP_SDP1_NATIVE; 135 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 136 IXGBE_WRITE_FLUSH(hw); 137 138 phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_82599; 139 phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_82599; 140 } 141 /* Identify the PHY or SFP module */ 142 ret_val = phy->ops.identify(hw); 143 if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) 144 goto init_phy_ops_out; 145 146 /* Setup function pointers based on detected SFP module and speeds */ 147 ixgbe_init_mac_link_ops_82599(hw); 148 if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) 149 hw->phy.ops.reset = NULL; 150 151 /* If copper media, overwrite with copper function pointers */ 152 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 153 mac->ops.setup_link = ixgbe_setup_copper_link_82599; 154 mac->ops.get_link_capabilities = 155 ixgbe_get_copper_link_capabilities_generic; 156 } 157 158 /* Set necessary function pointers based on PHY type */ 159 switch (hw->phy.type) { 160 case ixgbe_phy_tn: 161 phy->ops.setup_link = ixgbe_setup_phy_link_tnx; 162 phy->ops.check_link = ixgbe_check_phy_link_tnx; 163 phy->ops.get_firmware_version = 164 ixgbe_get_phy_firmware_version_tnx; 165 break; 166 default: 167 break; 168 } 169 init_phy_ops_out: 170 return ret_val; 171 } 172 173 s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) 174 { 175 s32 ret_val = IXGBE_SUCCESS; 176 u16 list_offset, data_offset, data_value; 177 178 DEBUGFUNC("ixgbe_setup_sfp_modules_82599"); 179 180 if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { 181 ixgbe_init_mac_link_ops_82599(hw); 182 183 hw->phy.ops.reset = NULL; 184 185 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, 186 &data_offset); 187 if (ret_val != IXGBE_SUCCESS) 188 goto setup_sfp_out; 189 190 /* PHY config will finish before releasing the semaphore */ 191 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 192 IXGBE_GSSR_MAC_CSR_SM); 193 if (ret_val != IXGBE_SUCCESS) { 194 ret_val = IXGBE_ERR_SWFW_SYNC; 195 goto setup_sfp_out; 196 } 197 198 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) 199 goto setup_sfp_err; 200 while (data_value != 0xffff) { 201 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); 202 IXGBE_WRITE_FLUSH(hw); 203 if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) 204 goto setup_sfp_err; 205 } 206 207 /* Release the semaphore */ 208 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 209 /* Delay obtaining semaphore again to allow FW access 210 * prot_autoc_write uses the semaphore too. 211 */ 212 msec_delay(hw->eeprom.semaphore_delay); 213 214 /* Restart DSP and set SFI mode */ 215 ret_val = hw->mac.ops.prot_autoc_write(hw, 216 hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL, 217 FALSE); 218 219 if (ret_val) { 220 DEBUGOUT("sfp module setup not complete\n"); 221 ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; 222 goto setup_sfp_out; 223 } 224 225 } 226 227 setup_sfp_out: 228 return ret_val; 229 230 setup_sfp_err: 231 /* Release the semaphore */ 232 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 233 /* Delay obtaining semaphore again to allow FW access */ 234 msec_delay(hw->eeprom.semaphore_delay); 235 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 236 "eeprom read at offset %d failed", data_offset); 237 return IXGBE_ERR_PHY; 238 } 239 240 /** 241 * prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read 242 * @hw: pointer to hardware structure 243 * @locked: Return the if we locked for this read. 244 * @reg_val: Value we read from AUTOC 245 * 246 * For this part (82599) we need to wrap read-modify-writes with a possible 247 * FW/SW lock. It is assumed this lock will be freed with the next 248 * prot_autoc_write_82599(). 249 */ 250 s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked, u32 *reg_val) 251 { 252 s32 ret_val; 253 254 *locked = FALSE; 255 /* If LESM is on then we need to hold the SW/FW semaphore. */ 256 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { 257 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 258 IXGBE_GSSR_MAC_CSR_SM); 259 if (ret_val != IXGBE_SUCCESS) 260 return IXGBE_ERR_SWFW_SYNC; 261 262 *locked = TRUE; 263 } 264 265 *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC); 266 return IXGBE_SUCCESS; 267 } 268 269 /** 270 * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write 271 * @hw: pointer to hardware structure 272 * @reg_val: value to write to AUTOC 273 * @locked: bool to indicate whether the SW/FW lock was already taken by 274 * previous proc_autoc_read_82599. 275 * 276 * This part (82599) may need to hold the SW/FW lock around all writes to 277 * AUTOC. Likewise after a write we need to do a pipeline reset. 278 */ 279 s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked) 280 { 281 s32 ret_val = IXGBE_SUCCESS; 282 283 /* Blocked by MNG FW so bail */ 284 if (ixgbe_check_reset_blocked(hw)) 285 goto out; 286 287 /* We only need to get the lock if: 288 * - We didn't do it already (in the read part of a read-modify-write) 289 * - LESM is enabled. 290 */ 291 if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) { 292 ret_val = hw->mac.ops.acquire_swfw_sync(hw, 293 IXGBE_GSSR_MAC_CSR_SM); 294 if (ret_val != IXGBE_SUCCESS) 295 return IXGBE_ERR_SWFW_SYNC; 296 297 locked = TRUE; 298 } 299 300 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 301 ret_val = ixgbe_reset_pipeline_82599(hw); 302 303 out: 304 /* Free the SW/FW semaphore as we either grabbed it here or 305 * already had it when this function was called. 306 */ 307 if (locked) 308 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 309 310 return ret_val; 311 } 312 313 /** 314 * ixgbe_init_ops_82599 - Inits func ptrs and MAC type 315 * @hw: pointer to hardware structure 316 * 317 * Initialize the function pointers and assign the MAC type for 82599. 318 * Does not touch the hardware. 319 **/ 320 321 s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) 322 { 323 struct ixgbe_mac_info *mac = &hw->mac; 324 struct ixgbe_phy_info *phy = &hw->phy; 325 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 326 s32 ret_val; 327 328 DEBUGFUNC("ixgbe_init_ops_82599"); 329 330 ixgbe_init_phy_ops_generic(hw); 331 ret_val = ixgbe_init_ops_generic(hw); 332 333 /* PHY */ 334 phy->ops.identify = ixgbe_identify_phy_82599; 335 phy->ops.init = ixgbe_init_phy_ops_82599; 336 337 /* MAC */ 338 mac->ops.reset_hw = ixgbe_reset_hw_82599; 339 mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2; 340 mac->ops.get_media_type = ixgbe_get_media_type_82599; 341 mac->ops.get_supported_physical_layer = 342 ixgbe_get_supported_physical_layer_82599; 343 mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic; 344 mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic; 345 mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82599; 346 mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82599; 347 mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82599; 348 mac->ops.start_hw = ixgbe_start_hw_82599; 349 mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic; 350 mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic; 351 mac->ops.get_device_caps = ixgbe_get_device_caps_generic; 352 mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic; 353 mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic; 354 mac->ops.prot_autoc_read = prot_autoc_read_82599; 355 mac->ops.prot_autoc_write = prot_autoc_write_82599; 356 357 /* RAR, Multicast, VLAN */ 358 mac->ops.set_vmdq = ixgbe_set_vmdq_generic; 359 mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic; 360 mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic; 361 mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic; 362 mac->rar_highwater = 1; 363 mac->ops.set_vfta = ixgbe_set_vfta_generic; 364 mac->ops.set_vlvf = ixgbe_set_vlvf_generic; 365 mac->ops.clear_vfta = ixgbe_clear_vfta_generic; 366 mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic; 367 mac->ops.setup_sfp = ixgbe_setup_sfp_modules_82599; 368 mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing; 369 mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing; 370 371 /* Link */ 372 mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82599; 373 mac->ops.check_link = ixgbe_check_mac_link_generic; 374 mac->ops.setup_rxpba = ixgbe_set_rxpba_generic; 375 ixgbe_init_mac_link_ops_82599(hw); 376 377 mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; 378 mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; 379 mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; 380 mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE; 381 mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; 382 mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; 383 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 384 385 mac->arc_subsystem_valid = !!(IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw)) 386 & IXGBE_FWSM_MODE_MASK); 387 388 hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; 389 390 /* EEPROM */ 391 eeprom->ops.read = ixgbe_read_eeprom_82599; 392 eeprom->ops.read_buffer = ixgbe_read_eeprom_buffer_82599; 393 394 /* Manageability interface */ 395 mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic; 396 397 398 mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic; 399 400 return ret_val; 401 } 402 403 /** 404 * ixgbe_get_link_capabilities_82599 - Determines link capabilities 405 * @hw: pointer to hardware structure 406 * @speed: pointer to link speed 407 * @autoneg: TRUE when autoneg or autotry is enabled 408 * 409 * Determines the link capabilities by reading the AUTOC register. 410 **/ 411 s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, 412 ixgbe_link_speed *speed, 413 bool *autoneg) 414 { 415 s32 status = IXGBE_SUCCESS; 416 u32 autoc = 0; 417 418 DEBUGFUNC("ixgbe_get_link_capabilities_82599"); 419 420 421 /* Check if 1G SFP module. */ 422 if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || 423 hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || 424 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 425 hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 || 426 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 427 hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { 428 *speed = IXGBE_LINK_SPEED_1GB_FULL; 429 *autoneg = TRUE; 430 goto out; 431 } 432 433 /* 434 * Determine link capabilities based on the stored value of AUTOC, 435 * which represents EEPROM defaults. If AUTOC value has not 436 * been stored, use the current register values. 437 */ 438 if (hw->mac.orig_link_settings_stored) 439 autoc = hw->mac.orig_autoc; 440 else 441 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 442 443 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 444 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 445 *speed = IXGBE_LINK_SPEED_1GB_FULL; 446 *autoneg = FALSE; 447 break; 448 449 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 450 *speed = IXGBE_LINK_SPEED_10GB_FULL; 451 *autoneg = FALSE; 452 break; 453 454 case IXGBE_AUTOC_LMS_1G_AN: 455 *speed = IXGBE_LINK_SPEED_1GB_FULL; 456 *autoneg = TRUE; 457 break; 458 459 case IXGBE_AUTOC_LMS_10G_SERIAL: 460 *speed = IXGBE_LINK_SPEED_10GB_FULL; 461 *autoneg = FALSE; 462 break; 463 464 case IXGBE_AUTOC_LMS_KX4_KX_KR: 465 case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: 466 *speed = IXGBE_LINK_SPEED_UNKNOWN; 467 if (autoc & IXGBE_AUTOC_KR_SUPP) 468 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 469 if (autoc & IXGBE_AUTOC_KX4_SUPP) 470 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 471 if (autoc & IXGBE_AUTOC_KX_SUPP) 472 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 473 *autoneg = TRUE; 474 break; 475 476 case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: 477 *speed = IXGBE_LINK_SPEED_100_FULL; 478 if (autoc & IXGBE_AUTOC_KR_SUPP) 479 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 480 if (autoc & IXGBE_AUTOC_KX4_SUPP) 481 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 482 if (autoc & IXGBE_AUTOC_KX_SUPP) 483 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 484 *autoneg = TRUE; 485 break; 486 487 case IXGBE_AUTOC_LMS_SGMII_1G_100M: 488 *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; 489 *autoneg = FALSE; 490 break; 491 492 default: 493 status = IXGBE_ERR_LINK_SETUP; 494 goto out; 495 break; 496 } 497 498 if (hw->phy.multispeed_fiber) { 499 *speed |= IXGBE_LINK_SPEED_10GB_FULL | 500 IXGBE_LINK_SPEED_1GB_FULL; 501 502 /* QSFP must not enable full auto-negotiation 503 * Limited autoneg is enabled at 1G 504 */ 505 if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp) 506 *autoneg = FALSE; 507 else 508 *autoneg = TRUE; 509 } 510 511 out: 512 return status; 513 } 514 515 /** 516 * ixgbe_get_media_type_82599 - Get media type 517 * @hw: pointer to hardware structure 518 * 519 * Returns the media type (fiber, copper, backplane) 520 **/ 521 enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) 522 { 523 enum ixgbe_media_type media_type; 524 525 DEBUGFUNC("ixgbe_get_media_type_82599"); 526 527 /* Detect if there is a copper PHY attached. */ 528 switch (hw->phy.type) { 529 case ixgbe_phy_cu_unknown: 530 case ixgbe_phy_tn: 531 media_type = ixgbe_media_type_copper; 532 goto out; 533 default: 534 break; 535 } 536 537 switch (hw->device_id) { 538 case IXGBE_DEV_ID_82599_KX4: 539 case IXGBE_DEV_ID_82599_KX4_MEZZ: 540 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: 541 case IXGBE_DEV_ID_82599_KR: 542 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: 543 case IXGBE_DEV_ID_82599_XAUI_LOM: 544 /* Default device ID is mezzanine card KX/KX4 */ 545 media_type = ixgbe_media_type_backplane; 546 break; 547 case IXGBE_DEV_ID_82599_SFP: 548 case IXGBE_DEV_ID_82599_SFP_FCOE: 549 case IXGBE_DEV_ID_82599_SFP_EM: 550 case IXGBE_DEV_ID_82599_SFP_SF2: 551 case IXGBE_DEV_ID_82599_SFP_SF_QP: 552 case IXGBE_DEV_ID_82599EN_SFP: 553 media_type = ixgbe_media_type_fiber; 554 break; 555 case IXGBE_DEV_ID_82599_CX4: 556 media_type = ixgbe_media_type_cx4; 557 break; 558 case IXGBE_DEV_ID_82599_T3_LOM: 559 media_type = ixgbe_media_type_copper; 560 break; 561 case IXGBE_DEV_ID_82599_QSFP_SF_QP: 562 media_type = ixgbe_media_type_fiber_qsfp; 563 break; 564 case IXGBE_DEV_ID_82599_BYPASS: 565 media_type = ixgbe_media_type_fiber_fixed; 566 hw->phy.multispeed_fiber = TRUE; 567 break; 568 default: 569 media_type = ixgbe_media_type_unknown; 570 break; 571 } 572 out: 573 return media_type; 574 } 575 576 /** 577 * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3 578 * @hw: pointer to hardware structure 579 * 580 * Disables link during D3 power down sequence. 581 * 582 **/ 583 void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw) 584 { 585 u32 autoc2_reg; 586 u16 ee_ctrl_2 = 0; 587 588 DEBUGFUNC("ixgbe_stop_mac_link_on_d3_82599"); 589 ixgbe_read_eeprom(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2); 590 591 if (!ixgbe_mng_present(hw) && !hw->wol_enabled && 592 ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) { 593 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 594 autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK; 595 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); 596 } 597 } 598 599 /** 600 * ixgbe_start_mac_link_82599 - Setup MAC link settings 601 * @hw: pointer to hardware structure 602 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 603 * 604 * Configures link settings based on values in the ixgbe_hw struct. 605 * Restarts the link. Performs autonegotiation if needed. 606 **/ 607 s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, 608 bool autoneg_wait_to_complete) 609 { 610 u32 autoc_reg; 611 u32 links_reg; 612 u32 i; 613 s32 status = IXGBE_SUCCESS; 614 bool got_lock = FALSE; 615 616 DEBUGFUNC("ixgbe_start_mac_link_82599"); 617 618 619 /* reset_pipeline requires us to hold this lock as it writes to 620 * AUTOC. 621 */ 622 if (ixgbe_verify_lesm_fw_enabled_82599(hw)) { 623 status = hw->mac.ops.acquire_swfw_sync(hw, 624 IXGBE_GSSR_MAC_CSR_SM); 625 if (status != IXGBE_SUCCESS) 626 goto out; 627 628 got_lock = TRUE; 629 } 630 631 /* Restart link */ 632 ixgbe_reset_pipeline_82599(hw); 633 634 if (got_lock) 635 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); 636 637 /* Only poll for autoneg to complete if specified to do so */ 638 if (autoneg_wait_to_complete) { 639 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 640 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 641 IXGBE_AUTOC_LMS_KX4_KX_KR || 642 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 643 IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 644 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 645 IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 646 links_reg = 0; /* Just in case Autoneg time = 0 */ 647 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 648 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 649 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 650 break; 651 msec_delay(100); 652 } 653 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 654 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 655 DEBUGOUT("Autoneg did not complete.\n"); 656 } 657 } 658 } 659 660 /* Add delay to filter out noises during initial link setup */ 661 msec_delay(50); 662 663 out: 664 return status; 665 } 666 667 /** 668 * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser 669 * @hw: pointer to hardware structure 670 * 671 * The base drivers may require better control over SFP+ module 672 * PHY states. This includes selectively shutting down the Tx 673 * laser on the PHY, effectively halting physical link. 674 **/ 675 void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 676 { 677 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 678 679 /* Blocked by MNG FW so bail */ 680 if (ixgbe_check_reset_blocked(hw)) 681 return; 682 683 /* Disable Tx laser; allow 100us to go dark per spec */ 684 esdp_reg |= IXGBE_ESDP_SDP3; 685 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 686 IXGBE_WRITE_FLUSH(hw); 687 usec_delay(100); 688 } 689 690 /** 691 * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser 692 * @hw: pointer to hardware structure 693 * 694 * The base drivers may require better control over SFP+ module 695 * PHY states. This includes selectively turning on the Tx 696 * laser on the PHY, effectively starting physical link. 697 **/ 698 void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 699 { 700 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 701 702 /* Enable Tx laser; allow 100ms to light up */ 703 esdp_reg &= ~IXGBE_ESDP_SDP3; 704 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 705 IXGBE_WRITE_FLUSH(hw); 706 msec_delay(100); 707 } 708 709 /** 710 * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser 711 * @hw: pointer to hardware structure 712 * 713 * When the driver changes the link speeds that it can support, 714 * it sets autotry_restart to TRUE to indicate that we need to 715 * initiate a new autotry session with the link partner. To do 716 * so, we set the speed then disable and re-enable the Tx laser, to 717 * alert the link partner that it also needs to restart autotry on its 718 * end. This is consistent with TRUE clause 37 autoneg, which also 719 * involves a loss of signal. 720 **/ 721 void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) 722 { 723 DEBUGFUNC("ixgbe_flap_tx_laser_multispeed_fiber"); 724 725 /* Blocked by MNG FW so bail */ 726 if (ixgbe_check_reset_blocked(hw)) 727 return; 728 729 if (hw->mac.autotry_restart) { 730 ixgbe_disable_tx_laser_multispeed_fiber(hw); 731 ixgbe_enable_tx_laser_multispeed_fiber(hw); 732 hw->mac.autotry_restart = FALSE; 733 } 734 } 735 736 /** 737 * ixgbe_set_hard_rate_select_speed - Set module link speed 738 * @hw: pointer to hardware structure 739 * @speed: link speed to set 740 * 741 * Set module link speed via RS0/RS1 rate select pins. 742 */ 743 void ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, 744 ixgbe_link_speed speed) 745 { 746 u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); 747 748 switch (speed) { 749 case IXGBE_LINK_SPEED_10GB_FULL: 750 esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); 751 break; 752 case IXGBE_LINK_SPEED_1GB_FULL: 753 esdp_reg &= ~IXGBE_ESDP_SDP5; 754 esdp_reg |= IXGBE_ESDP_SDP5_DIR; 755 break; 756 default: 757 DEBUGOUT("Invalid fixed module speed\n"); 758 return; 759 } 760 761 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); 762 IXGBE_WRITE_FLUSH(hw); 763 } 764 765 /** 766 * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed 767 * @hw: pointer to hardware structure 768 * @speed: new link speed 769 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 770 * 771 * Implements the Intel SmartSpeed algorithm. 772 **/ 773 s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, 774 ixgbe_link_speed speed, 775 bool autoneg_wait_to_complete) 776 { 777 s32 status = IXGBE_SUCCESS; 778 ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; 779 s32 i, j; 780 bool link_up = FALSE; 781 u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 782 783 DEBUGFUNC("ixgbe_setup_mac_link_smartspeed"); 784 785 /* Set autoneg_advertised value based on input link speed */ 786 hw->phy.autoneg_advertised = 0; 787 788 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 789 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; 790 791 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 792 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; 793 794 if (speed & IXGBE_LINK_SPEED_100_FULL) 795 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; 796 797 /* 798 * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the 799 * autoneg advertisement if link is unable to be established at the 800 * highest negotiated rate. This can sometimes happen due to integrity 801 * issues with the physical media connection. 802 */ 803 804 /* First, try to get link with full advertisement */ 805 hw->phy.smart_speed_active = FALSE; 806 for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { 807 status = ixgbe_setup_mac_link_82599(hw, speed, 808 autoneg_wait_to_complete); 809 if (status != IXGBE_SUCCESS) 810 goto out; 811 812 /* 813 * Wait for the controller to acquire link. Per IEEE 802.3ap, 814 * Section 73.10.2, we may have to wait up to 500ms if KR is 815 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per 816 * Table 9 in the AN MAS. 817 */ 818 for (i = 0; i < 5; i++) { 819 msec_delay(100); 820 821 /* If we have link, just jump out */ 822 status = ixgbe_check_link(hw, &link_speed, &link_up, 823 FALSE); 824 if (status != IXGBE_SUCCESS) 825 goto out; 826 827 if (link_up) 828 goto out; 829 } 830 } 831 832 /* 833 * We didn't get link. If we advertised KR plus one of KX4/KX 834 * (or BX4/BX), then disable KR and try again. 835 */ 836 if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || 837 ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) 838 goto out; 839 840 /* Turn SmartSpeed on to disable KR support */ 841 hw->phy.smart_speed_active = TRUE; 842 status = ixgbe_setup_mac_link_82599(hw, speed, 843 autoneg_wait_to_complete); 844 if (status != IXGBE_SUCCESS) 845 goto out; 846 847 /* 848 * Wait for the controller to acquire link. 600ms will allow for 849 * the AN link_fail_inhibit_timer as well for multiple cycles of 850 * parallel detect, both 10g and 1g. This allows for the maximum 851 * connect attempts as defined in the AN MAS table 73-7. 852 */ 853 for (i = 0; i < 6; i++) { 854 msec_delay(100); 855 856 /* If we have link, just jump out */ 857 status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE); 858 if (status != IXGBE_SUCCESS) 859 goto out; 860 861 if (link_up) 862 goto out; 863 } 864 865 /* We didn't get link. Turn SmartSpeed back off. */ 866 hw->phy.smart_speed_active = FALSE; 867 status = ixgbe_setup_mac_link_82599(hw, speed, 868 autoneg_wait_to_complete); 869 870 out: 871 if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) 872 DEBUGOUT("Smartspeed has downgraded the link speed " 873 "from the maximum advertised\n"); 874 return status; 875 } 876 877 /** 878 * ixgbe_setup_mac_link_82599 - Set MAC link speed 879 * @hw: pointer to hardware structure 880 * @speed: new link speed 881 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 882 * 883 * Set the link speed in the AUTOC register and restarts link. 884 **/ 885 s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, 886 ixgbe_link_speed speed, 887 bool autoneg_wait_to_complete) 888 { 889 bool autoneg = FALSE; 890 s32 status = IXGBE_SUCCESS; 891 u32 pma_pmd_1g, link_mode; 892 u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); /* holds the value of AUTOC register at this current point in time */ 893 u32 orig_autoc = 0; /* holds the cached value of AUTOC register */ 894 u32 autoc = current_autoc; /* Temporary variable used for comparison purposes */ 895 u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 896 u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; 897 u32 links_reg; 898 u32 i; 899 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 900 901 DEBUGFUNC("ixgbe_setup_mac_link_82599"); 902 903 /* Check to see if speed passed in is supported. */ 904 status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); 905 if (status) 906 goto out; 907 908 speed &= link_capabilities; 909 910 if (speed == IXGBE_LINK_SPEED_UNKNOWN) { 911 status = IXGBE_ERR_LINK_SETUP; 912 goto out; 913 } 914 915 /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ 916 if (hw->mac.orig_link_settings_stored) 917 orig_autoc = hw->mac.orig_autoc; 918 else 919 orig_autoc = autoc; 920 921 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 922 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 923 924 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || 925 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 926 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 927 /* Set KX4/KX/KR support according to speed requested */ 928 autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); 929 if (speed & IXGBE_LINK_SPEED_10GB_FULL) { 930 if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) 931 autoc |= IXGBE_AUTOC_KX4_SUPP; 932 if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && 933 (hw->phy.smart_speed_active == FALSE)) 934 autoc |= IXGBE_AUTOC_KR_SUPP; 935 } 936 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 937 autoc |= IXGBE_AUTOC_KX_SUPP; 938 } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && 939 (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || 940 link_mode == IXGBE_AUTOC_LMS_1G_AN)) { 941 /* Switch from 1G SFI to 10G SFI if requested */ 942 if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && 943 (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { 944 autoc &= ~IXGBE_AUTOC_LMS_MASK; 945 autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; 946 } 947 } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && 948 (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { 949 /* Switch from 10G SFI to 1G SFI if requested */ 950 if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && 951 (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { 952 autoc &= ~IXGBE_AUTOC_LMS_MASK; 953 if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel) 954 autoc |= IXGBE_AUTOC_LMS_1G_AN; 955 else 956 autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; 957 } 958 } 959 960 if (autoc != current_autoc) { 961 /* Restart link */ 962 status = hw->mac.ops.prot_autoc_write(hw, autoc, FALSE); 963 if (status != IXGBE_SUCCESS) 964 goto out; 965 966 /* Only poll for autoneg to complete if specified to do so */ 967 if (autoneg_wait_to_complete) { 968 if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || 969 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || 970 link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { 971 links_reg = 0; /*Just in case Autoneg time=0*/ 972 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 973 links_reg = 974 IXGBE_READ_REG(hw, IXGBE_LINKS); 975 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 976 break; 977 msec_delay(100); 978 } 979 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 980 status = 981 IXGBE_ERR_AUTONEG_NOT_COMPLETE; 982 DEBUGOUT("Autoneg did not complete.\n"); 983 } 984 } 985 } 986 987 /* Add delay to filter out noises during initial link setup */ 988 msec_delay(50); 989 } 990 991 out: 992 return status; 993 } 994 995 /** 996 * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field 997 * @hw: pointer to hardware structure 998 * @speed: new link speed 999 * @autoneg_wait_to_complete: TRUE if waiting is needed to complete 1000 * 1001 * Restarts link on PHY and MAC based on settings passed in. 1002 **/ 1003 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, 1004 ixgbe_link_speed speed, 1005 bool autoneg_wait_to_complete) 1006 { 1007 s32 status; 1008 1009 DEBUGFUNC("ixgbe_setup_copper_link_82599"); 1010 1011 /* Setup the PHY according to input speed */ 1012 status = hw->phy.ops.setup_link_speed(hw, speed, 1013 autoneg_wait_to_complete); 1014 /* Set up MAC */ 1015 ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); 1016 1017 return status; 1018 } 1019 1020 /** 1021 * ixgbe_reset_hw_82599 - Perform hardware reset 1022 * @hw: pointer to hardware structure 1023 * 1024 * Resets the hardware by resetting the transmit and receive units, masks 1025 * and clears all interrupts, perform a PHY reset, and perform a link (MAC) 1026 * reset. 1027 **/ 1028 s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) 1029 { 1030 ixgbe_link_speed link_speed; 1031 s32 status; 1032 u32 ctrl = 0; 1033 u32 i, autoc, autoc2; 1034 u32 curr_lms; 1035 bool link_up = FALSE; 1036 1037 DEBUGFUNC("ixgbe_reset_hw_82599"); 1038 1039 /* Call adapter stop to disable tx/rx and clear interrupts */ 1040 status = hw->mac.ops.stop_adapter(hw); 1041 if (status != IXGBE_SUCCESS) 1042 goto reset_hw_out; 1043 1044 /* flush pending Tx transactions */ 1045 ixgbe_clear_tx_pending(hw); 1046 1047 /* PHY ops must be identified and initialized prior to reset */ 1048 1049 /* Identify PHY and related function pointers */ 1050 status = hw->phy.ops.init(hw); 1051 1052 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 1053 goto reset_hw_out; 1054 1055 /* Setup SFP module if there is one present. */ 1056 if (hw->phy.sfp_setup_needed) { 1057 status = hw->mac.ops.setup_sfp(hw); 1058 hw->phy.sfp_setup_needed = FALSE; 1059 } 1060 1061 if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 1062 goto reset_hw_out; 1063 1064 /* Reset PHY */ 1065 if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL) 1066 hw->phy.ops.reset(hw); 1067 1068 /* remember AUTOC from before we reset */ 1069 curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK; 1070 1071 mac_reset_top: 1072 /* 1073 * Issue global reset to the MAC. Needs to be SW reset if link is up. 1074 * If link reset is used when link is up, it might reset the PHY when 1075 * mng is using it. If link is down or the flag to force full link 1076 * reset is set, then perform link reset. 1077 */ 1078 ctrl = IXGBE_CTRL_LNK_RST; 1079 if (!hw->force_full_reset) { 1080 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE); 1081 if (link_up) 1082 ctrl = IXGBE_CTRL_RST; 1083 } 1084 1085 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); 1086 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 1087 IXGBE_WRITE_FLUSH(hw); 1088 1089 /* Poll for reset bit to self-clear meaning reset is complete */ 1090 for (i = 0; i < 10; i++) { 1091 usec_delay(1); 1092 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 1093 if (!(ctrl & IXGBE_CTRL_RST_MASK)) 1094 break; 1095 } 1096 1097 if (ctrl & IXGBE_CTRL_RST_MASK) { 1098 status = IXGBE_ERR_RESET_FAILED; 1099 DEBUGOUT("Reset polling failed to complete.\n"); 1100 } 1101 1102 msec_delay(50); 1103 1104 /* 1105 * Double resets are required for recovery from certain error 1106 * conditions. Between resets, it is necessary to stall to 1107 * allow time for any pending HW events to complete. 1108 */ 1109 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 1110 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 1111 goto mac_reset_top; 1112 } 1113 1114 /* 1115 * Store the original AUTOC/AUTOC2 values if they have not been 1116 * stored off yet. Otherwise restore the stored original 1117 * values since the reset operation sets back to defaults. 1118 */ 1119 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 1120 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 1121 1122 /* Enable link if disabled in NVM */ 1123 if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) { 1124 autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; 1125 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); 1126 IXGBE_WRITE_FLUSH(hw); 1127 } 1128 1129 if (hw->mac.orig_link_settings_stored == FALSE) { 1130 hw->mac.orig_autoc = autoc; 1131 hw->mac.orig_autoc2 = autoc2; 1132 hw->mac.orig_link_settings_stored = TRUE; 1133 } else { 1134 1135 /* If MNG FW is running on a multi-speed device that 1136 * doesn't autoneg with out driver support we need to 1137 * leave LMS in the state it was before we MAC reset. 1138 * Likewise if we support WoL we don't want change the 1139 * LMS state. 1140 */ 1141 if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) || 1142 hw->wol_enabled) 1143 hw->mac.orig_autoc = 1144 (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) | 1145 curr_lms; 1146 1147 if (autoc != hw->mac.orig_autoc) { 1148 status = hw->mac.ops.prot_autoc_write(hw, 1149 hw->mac.orig_autoc, 1150 FALSE); 1151 if (status != IXGBE_SUCCESS) 1152 goto reset_hw_out; 1153 } 1154 1155 if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != 1156 (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { 1157 autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; 1158 autoc2 |= (hw->mac.orig_autoc2 & 1159 IXGBE_AUTOC2_UPPER_MASK); 1160 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); 1161 } 1162 } 1163 1164 /* Store the permanent mac address */ 1165 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 1166 1167 /* 1168 * Store MAC address from RAR0, clear receive address registers, and 1169 * clear the multicast table. Also reset num_rar_entries to 128, 1170 * since we modify this value when programming the SAN MAC address. 1171 */ 1172 hw->mac.num_rar_entries = 128; 1173 hw->mac.ops.init_rx_addrs(hw); 1174 1175 /* Store the permanent SAN mac address */ 1176 hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); 1177 1178 /* Add the SAN MAC address to the RAR only if it's a valid address */ 1179 if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { 1180 hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, 1181 hw->mac.san_addr, 0, IXGBE_RAH_AV); 1182 1183 /* Save the SAN MAC RAR index */ 1184 hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; 1185 1186 /* Reserve the last RAR for the SAN MAC address */ 1187 hw->mac.num_rar_entries--; 1188 } 1189 1190 /* Store the alternative WWNN/WWPN prefix */ 1191 hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, 1192 &hw->mac.wwpn_prefix); 1193 1194 reset_hw_out: 1195 return status; 1196 } 1197 1198 /** 1199 * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete 1200 * @hw: pointer to hardware structure 1201 * @fdircmd: current value of FDIRCMD register 1202 */ 1203 static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd) 1204 { 1205 int i; 1206 1207 for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { 1208 *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); 1209 if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK)) 1210 return IXGBE_SUCCESS; 1211 usec_delay(10); 1212 } 1213 1214 return IXGBE_ERR_FDIR_CMD_INCOMPLETE; 1215 } 1216 1217 /** 1218 * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. 1219 * @hw: pointer to hardware structure 1220 **/ 1221 s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) 1222 { 1223 s32 err; 1224 int i; 1225 u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); 1226 u32 fdircmd; 1227 fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; 1228 1229 DEBUGFUNC("ixgbe_reinit_fdir_tables_82599"); 1230 1231 /* 1232 * Before starting reinitialization process, 1233 * FDIRCMD.CMD must be zero. 1234 */ 1235 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1236 if (err) { 1237 DEBUGOUT("Flow Director previous command did not complete, aborting table re-initialization.\n"); 1238 return err; 1239 } 1240 1241 IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); 1242 IXGBE_WRITE_FLUSH(hw); 1243 /* 1244 * 82599 adapters flow director init flow cannot be restarted, 1245 * Workaround 82599 silicon errata by performing the following steps 1246 * before re-writing the FDIRCTRL control register with the same value. 1247 * - write 1 to bit 8 of FDIRCMD register & 1248 * - write 0 to bit 8 of FDIRCMD register 1249 */ 1250 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1251 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | 1252 IXGBE_FDIRCMD_CLEARHT)); 1253 IXGBE_WRITE_FLUSH(hw); 1254 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1255 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & 1256 ~IXGBE_FDIRCMD_CLEARHT)); 1257 IXGBE_WRITE_FLUSH(hw); 1258 /* 1259 * Clear FDIR Hash register to clear any leftover hashes 1260 * waiting to be programmed. 1261 */ 1262 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); 1263 IXGBE_WRITE_FLUSH(hw); 1264 1265 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); 1266 IXGBE_WRITE_FLUSH(hw); 1267 1268 /* Poll init-done after we write FDIRCTRL register */ 1269 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { 1270 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & 1271 IXGBE_FDIRCTRL_INIT_DONE) 1272 break; 1273 msec_delay(1); 1274 } 1275 if (i >= IXGBE_FDIR_INIT_DONE_POLL) { 1276 DEBUGOUT("Flow Director Signature poll time exceeded!\n"); 1277 return IXGBE_ERR_FDIR_REINIT_FAILED; 1278 } 1279 1280 /* Clear FDIR statistics registers (read to clear) */ 1281 IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); 1282 IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); 1283 IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); 1284 IXGBE_READ_REG(hw, IXGBE_FDIRMISS); 1285 IXGBE_READ_REG(hw, IXGBE_FDIRLEN); 1286 1287 return IXGBE_SUCCESS; 1288 } 1289 1290 /** 1291 * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers 1292 * @hw: pointer to hardware structure 1293 * @fdirctrl: value to write to flow director control register 1294 **/ 1295 static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) 1296 { 1297 int i; 1298 1299 DEBUGFUNC("ixgbe_fdir_enable_82599"); 1300 1301 /* Prime the keys for hashing */ 1302 IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); 1303 IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); 1304 1305 /* 1306 * Poll init-done after we write the register. Estimated times: 1307 * 10G: PBALLOC = 11b, timing is 60us 1308 * 1G: PBALLOC = 11b, timing is 600us 1309 * 100M: PBALLOC = 11b, timing is 6ms 1310 * 1311 * Multiple these timings by 4 if under full Rx load 1312 * 1313 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for 1314 * 1 msec per poll time. If we're at line rate and drop to 100M, then 1315 * this might not finish in our poll time, but we can live with that 1316 * for now. 1317 */ 1318 IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); 1319 IXGBE_WRITE_FLUSH(hw); 1320 for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { 1321 if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & 1322 IXGBE_FDIRCTRL_INIT_DONE) 1323 break; 1324 msec_delay(1); 1325 } 1326 1327 if (i >= IXGBE_FDIR_INIT_DONE_POLL) 1328 DEBUGOUT("Flow Director poll time exceeded!\n"); 1329 } 1330 1331 /** 1332 * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters 1333 * @hw: pointer to hardware structure 1334 * @fdirctrl: value to write to flow director control register, initially 1335 * contains just the value of the Rx packet buffer allocation 1336 **/ 1337 s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) 1338 { 1339 DEBUGFUNC("ixgbe_init_fdir_signature_82599"); 1340 1341 /* 1342 * Continue setup of fdirctrl register bits: 1343 * Move the flexible bytes to use the ethertype - shift 6 words 1344 * Set the maximum length per hash bucket to 0xA filters 1345 * Send interrupt when 64 filters are left 1346 */ 1347 fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | 1348 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | 1349 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); 1350 1351 /* write hashes and fdirctrl register, poll for completion */ 1352 ixgbe_fdir_enable_82599(hw, fdirctrl); 1353 1354 return IXGBE_SUCCESS; 1355 } 1356 1357 /** 1358 * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters 1359 * @hw: pointer to hardware structure 1360 * @fdirctrl: value to write to flow director control register, initially 1361 * contains just the value of the Rx packet buffer allocation 1362 * @cloud_mode: TRUE - cloud mode, FALSE - other mode 1363 **/ 1364 s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl, 1365 bool cloud_mode) 1366 { 1367 DEBUGFUNC("ixgbe_init_fdir_perfect_82599"); 1368 1369 /* 1370 * Continue setup of fdirctrl register bits: 1371 * Turn perfect match filtering on 1372 * Report hash in RSS field of Rx wb descriptor 1373 * Initialize the drop queue to queue 127 1374 * Move the flexible bytes to use the ethertype - shift 6 words 1375 * Set the maximum length per hash bucket to 0xA filters 1376 * Send interrupt when 64 (0x4 * 16) filters are left 1377 */ 1378 fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | 1379 IXGBE_FDIRCTRL_REPORT_STATUS | 1380 (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | 1381 (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | 1382 (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | 1383 (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); 1384 if ((hw->mac.type == ixgbe_mac_X550) || 1385 (hw->mac.type == ixgbe_mac_X550EM_x)) 1386 fdirctrl |= IXGBE_FDIRCTRL_DROP_NO_MATCH; 1387 1388 if (cloud_mode) 1389 fdirctrl |=(IXGBE_FDIRCTRL_FILTERMODE_CLOUD << 1390 IXGBE_FDIRCTRL_FILTERMODE_SHIFT); 1391 1392 /* write hashes and fdirctrl register, poll for completion */ 1393 ixgbe_fdir_enable_82599(hw, fdirctrl); 1394 1395 return IXGBE_SUCCESS; 1396 } 1397 1398 /** 1399 * ixgbe_set_fdir_drop_queue_82599 - Set Flow Director drop queue 1400 * @hw: pointer to hardware structure 1401 * @dropqueue: Rx queue index used for the dropped packets 1402 **/ 1403 void ixgbe_set_fdir_drop_queue_82599(struct ixgbe_hw *hw, u8 dropqueue) 1404 { 1405 u32 fdirctrl; 1406 1407 DEBUGFUNC("ixgbe_set_fdir_drop_queue_82599"); 1408 /* Clear init done bit and drop queue field */ 1409 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); 1410 fdirctrl &= ~(IXGBE_FDIRCTRL_DROP_Q_MASK | IXGBE_FDIRCTRL_INIT_DONE); 1411 1412 /* Set drop queue */ 1413 fdirctrl |= (dropqueue << IXGBE_FDIRCTRL_DROP_Q_SHIFT); 1414 if ((hw->mac.type == ixgbe_mac_X550) || 1415 (hw->mac.type == ixgbe_mac_X550EM_x)) 1416 fdirctrl |= IXGBE_FDIRCTRL_DROP_NO_MATCH; 1417 1418 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1419 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | 1420 IXGBE_FDIRCMD_CLEARHT)); 1421 IXGBE_WRITE_FLUSH(hw); 1422 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1423 (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & 1424 ~IXGBE_FDIRCMD_CLEARHT)); 1425 IXGBE_WRITE_FLUSH(hw); 1426 1427 /* write hashes and fdirctrl register, poll for completion */ 1428 ixgbe_fdir_enable_82599(hw, fdirctrl); 1429 } 1430 1431 /* 1432 * These defines allow us to quickly generate all of the necessary instructions 1433 * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION 1434 * for values 0 through 15 1435 */ 1436 #define IXGBE_ATR_COMMON_HASH_KEY \ 1437 (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) 1438 #define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ 1439 do { \ 1440 u32 n = (_n); \ 1441 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ 1442 common_hash ^= lo_hash_dword >> n; \ 1443 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ 1444 bucket_hash ^= lo_hash_dword >> n; \ 1445 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ 1446 sig_hash ^= lo_hash_dword << (16 - n); \ 1447 if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ 1448 common_hash ^= hi_hash_dword >> n; \ 1449 else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ 1450 bucket_hash ^= hi_hash_dword >> n; \ 1451 else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ 1452 sig_hash ^= hi_hash_dword << (16 - n); \ 1453 } while (0) 1454 1455 /** 1456 * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash 1457 * @stream: input bitstream to compute the hash on 1458 * 1459 * This function is almost identical to the function above but contains 1460 * several optimizations such as unwinding all of the loops, letting the 1461 * compiler work out all of the conditional ifs since the keys are static 1462 * defines, and computing two keys at once since the hashed dword stream 1463 * will be the same for both keys. 1464 **/ 1465 u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, 1466 union ixgbe_atr_hash_dword common) 1467 { 1468 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; 1469 u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; 1470 1471 /* record the flow_vm_vlan bits as they are a key part to the hash */ 1472 flow_vm_vlan = IXGBE_NTOHL(input.dword); 1473 1474 /* generate common hash dword */ 1475 hi_hash_dword = IXGBE_NTOHL(common.dword); 1476 1477 /* low dword is word swapped version of common */ 1478 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); 1479 1480 /* apply flow ID/VM pool/VLAN ID bits to hash words */ 1481 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); 1482 1483 /* Process bits 0 and 16 */ 1484 IXGBE_COMPUTE_SIG_HASH_ITERATION(0); 1485 1486 /* 1487 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to 1488 * delay this because bit 0 of the stream should not be processed 1489 * so we do not add the VLAN until after bit 0 was processed 1490 */ 1491 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); 1492 1493 /* Process remaining 30 bit of the key */ 1494 IXGBE_COMPUTE_SIG_HASH_ITERATION(1); 1495 IXGBE_COMPUTE_SIG_HASH_ITERATION(2); 1496 IXGBE_COMPUTE_SIG_HASH_ITERATION(3); 1497 IXGBE_COMPUTE_SIG_HASH_ITERATION(4); 1498 IXGBE_COMPUTE_SIG_HASH_ITERATION(5); 1499 IXGBE_COMPUTE_SIG_HASH_ITERATION(6); 1500 IXGBE_COMPUTE_SIG_HASH_ITERATION(7); 1501 IXGBE_COMPUTE_SIG_HASH_ITERATION(8); 1502 IXGBE_COMPUTE_SIG_HASH_ITERATION(9); 1503 IXGBE_COMPUTE_SIG_HASH_ITERATION(10); 1504 IXGBE_COMPUTE_SIG_HASH_ITERATION(11); 1505 IXGBE_COMPUTE_SIG_HASH_ITERATION(12); 1506 IXGBE_COMPUTE_SIG_HASH_ITERATION(13); 1507 IXGBE_COMPUTE_SIG_HASH_ITERATION(14); 1508 IXGBE_COMPUTE_SIG_HASH_ITERATION(15); 1509 1510 /* combine common_hash result with signature and bucket hashes */ 1511 bucket_hash ^= common_hash; 1512 bucket_hash &= IXGBE_ATR_HASH_MASK; 1513 1514 sig_hash ^= common_hash << 16; 1515 sig_hash &= IXGBE_ATR_HASH_MASK << 16; 1516 1517 /* return completed signature hash */ 1518 return sig_hash ^ bucket_hash; 1519 } 1520 1521 /** 1522 * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter 1523 * @hw: pointer to hardware structure 1524 * @input: unique input dword 1525 * @common: compressed common input dword 1526 * @queue: queue index to direct traffic to 1527 * 1528 * Note that the tunnel bit in input must not be set when the hardware 1529 * tunneling support does not exist. 1530 **/ 1531 void ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, 1532 union ixgbe_atr_hash_dword input, 1533 union ixgbe_atr_hash_dword common, 1534 u8 queue) 1535 { 1536 u64 fdirhashcmd; 1537 u8 flow_type; 1538 bool tunnel; 1539 u32 fdircmd; 1540 1541 DEBUGFUNC("ixgbe_fdir_add_signature_filter_82599"); 1542 1543 /* 1544 * Get the flow_type in order to program FDIRCMD properly 1545 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 1546 * fifth is FDIRCMD.TUNNEL_FILTER 1547 */ 1548 tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK); 1549 flow_type = input.formatted.flow_type & 1550 (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1); 1551 switch (flow_type) { 1552 case IXGBE_ATR_FLOW_TYPE_TCPV4: 1553 case IXGBE_ATR_FLOW_TYPE_UDPV4: 1554 case IXGBE_ATR_FLOW_TYPE_SCTPV4: 1555 case IXGBE_ATR_FLOW_TYPE_TCPV6: 1556 case IXGBE_ATR_FLOW_TYPE_UDPV6: 1557 case IXGBE_ATR_FLOW_TYPE_SCTPV6: 1558 break; 1559 default: 1560 DEBUGOUT(" Error on flow type input\n"); 1561 return; 1562 } 1563 1564 /* configure FDIRCMD register */ 1565 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | 1566 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; 1567 fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; 1568 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; 1569 if (tunnel) 1570 fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER; 1571 1572 /* 1573 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits 1574 * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. 1575 */ 1576 fdirhashcmd = (u64)fdircmd << 32; 1577 fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); 1578 IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); 1579 1580 DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); 1581 1582 return; 1583 } 1584 1585 #define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ 1586 do { \ 1587 u32 n = (_n); \ 1588 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ 1589 bucket_hash ^= lo_hash_dword >> n; \ 1590 if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ 1591 bucket_hash ^= hi_hash_dword >> n; \ 1592 } while (0) 1593 1594 /** 1595 * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash 1596 * @atr_input: input bitstream to compute the hash on 1597 * @input_mask: mask for the input bitstream 1598 * 1599 * This function serves two main purposes. First it applies the input_mask 1600 * to the atr_input resulting in a cleaned up atr_input data stream. 1601 * Secondly it computes the hash and stores it in the bkt_hash field at 1602 * the end of the input byte stream. This way it will be available for 1603 * future use without needing to recompute the hash. 1604 **/ 1605 void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, 1606 union ixgbe_atr_input *input_mask) 1607 { 1608 1609 u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; 1610 u32 bucket_hash = 0; 1611 u32 hi_dword = 0; 1612 u32 i = 0; 1613 1614 /* Apply masks to input data */ 1615 for (i = 0; i < 14; i++) 1616 input->dword_stream[i] &= input_mask->dword_stream[i]; 1617 1618 /* record the flow_vm_vlan bits as they are a key part to the hash */ 1619 flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]); 1620 1621 /* generate common hash dword */ 1622 for (i = 1; i <= 13; i++) 1623 hi_dword ^= input->dword_stream[i]; 1624 hi_hash_dword = IXGBE_NTOHL(hi_dword); 1625 1626 /* low dword is word swapped version of common */ 1627 lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); 1628 1629 /* apply flow ID/VM pool/VLAN ID bits to hash words */ 1630 hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); 1631 1632 /* Process bits 0 and 16 */ 1633 IXGBE_COMPUTE_BKT_HASH_ITERATION(0); 1634 1635 /* 1636 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to 1637 * delay this because bit 0 of the stream should not be processed 1638 * so we do not add the VLAN until after bit 0 was processed 1639 */ 1640 lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); 1641 1642 /* Process remaining 30 bit of the key */ 1643 for (i = 1; i <= 15; i++) 1644 IXGBE_COMPUTE_BKT_HASH_ITERATION(i); 1645 1646 /* 1647 * Limit hash to 13 bits since max bucket count is 8K. 1648 * Store result at the end of the input stream. 1649 */ 1650 input->formatted.bkt_hash = bucket_hash & 0x1FFF; 1651 } 1652 1653 /** 1654 * ixgbe_get_fdirtcpm_82599 - generate a TCP port from atr_input_masks 1655 * @input_mask: mask to be bit swapped 1656 * 1657 * The source and destination port masks for flow director are bit swapped 1658 * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to 1659 * generate a correctly swapped value we need to bit swap the mask and that 1660 * is what is accomplished by this function. 1661 **/ 1662 static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) 1663 { 1664 u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port); 1665 mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; 1666 mask |= IXGBE_NTOHS(input_mask->formatted.src_port); 1667 mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); 1668 mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); 1669 mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); 1670 return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); 1671 } 1672 1673 /* 1674 * These two macros are meant to address the fact that we have registers 1675 * that are either all or in part big-endian. As a result on big-endian 1676 * systems we will end up byte swapping the value to little-endian before 1677 * it is byte swapped again and written to the hardware in the original 1678 * big-endian format. 1679 */ 1680 #define IXGBE_STORE_AS_BE32(_value) \ 1681 (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ 1682 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) 1683 1684 #define IXGBE_WRITE_REG_BE32(a, reg, value) \ 1685 IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value))) 1686 1687 #define IXGBE_STORE_AS_BE16(_value) \ 1688 IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8)) 1689 1690 s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, 1691 union ixgbe_atr_input *input_mask, bool cloud_mode) 1692 { 1693 /* mask IPv6 since it is currently not supported */ 1694 u32 fdirm = IXGBE_FDIRM_DIPv6; 1695 u32 fdirtcpm; 1696 u32 fdirip6m; 1697 DEBUGFUNC("ixgbe_fdir_set_atr_input_mask_82599"); 1698 1699 /* 1700 * Program the relevant mask registers. If src/dst_port or src/dst_addr 1701 * are zero, then assume a full mask for that field. Also assume that 1702 * a VLAN of 0 is unspecified, so mask that out as well. L4type 1703 * cannot be masked out in this implementation. 1704 * 1705 * This also assumes IPv4 only. IPv6 masking isn't supported at this 1706 * point in time. 1707 */ 1708 1709 /* verify bucket hash is cleared on hash generation */ 1710 if (input_mask->formatted.bkt_hash) 1711 DEBUGOUT(" bucket hash should always be 0 in mask\n"); 1712 1713 /* Program FDIRM and verify partial masks */ 1714 switch (input_mask->formatted.vm_pool & 0x7F) { 1715 case 0x0: 1716 fdirm |= IXGBE_FDIRM_POOL; 1717 case 0x7F: 1718 break; 1719 default: 1720 DEBUGOUT(" Error on vm pool mask\n"); 1721 return IXGBE_ERR_CONFIG; 1722 } 1723 1724 switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { 1725 case 0x0: 1726 fdirm |= IXGBE_FDIRM_L4P; 1727 if (input_mask->formatted.dst_port || 1728 input_mask->formatted.src_port) { 1729 DEBUGOUT(" Error on src/dst port mask\n"); 1730 return IXGBE_ERR_CONFIG; 1731 } 1732 case IXGBE_ATR_L4TYPE_MASK: 1733 break; 1734 default: 1735 DEBUGOUT(" Error on flow type mask\n"); 1736 return IXGBE_ERR_CONFIG; 1737 } 1738 1739 switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) { 1740 case 0x0000: 1741 /* mask VLAN ID, fall through to mask VLAN priority */ 1742 fdirm |= IXGBE_FDIRM_VLANID; 1743 case 0x0FFF: 1744 /* mask VLAN priority */ 1745 fdirm |= IXGBE_FDIRM_VLANP; 1746 break; 1747 case 0xE000: 1748 /* mask VLAN ID only, fall through */ 1749 fdirm |= IXGBE_FDIRM_VLANID; 1750 case 0xEFFF: 1751 /* no VLAN fields masked */ 1752 break; 1753 default: 1754 DEBUGOUT(" Error on VLAN mask\n"); 1755 return IXGBE_ERR_CONFIG; 1756 } 1757 1758 switch (input_mask->formatted.flex_bytes & 0xFFFF) { 1759 case 0x0000: 1760 /* Mask Flex Bytes, fall through */ 1761 fdirm |= IXGBE_FDIRM_FLEX; 1762 case 0xFFFF: 1763 break; 1764 default: 1765 DEBUGOUT(" Error on flexible byte mask\n"); 1766 return IXGBE_ERR_CONFIG; 1767 } 1768 1769 if (cloud_mode) { 1770 fdirm |= IXGBE_FDIRM_L3P; 1771 fdirip6m = ((u32) 0xFFFFU << IXGBE_FDIRIP6M_DIPM_SHIFT); 1772 fdirip6m |= IXGBE_FDIRIP6M_ALWAYS_MASK; 1773 1774 switch (input_mask->formatted.inner_mac[0] & 0xFF) { 1775 case 0x00: 1776 /* Mask inner MAC, fall through */ 1777 fdirip6m |= IXGBE_FDIRIP6M_INNER_MAC; 1778 case 0xFF: 1779 break; 1780 default: 1781 DEBUGOUT(" Error on inner_mac byte mask\n"); 1782 return IXGBE_ERR_CONFIG; 1783 } 1784 1785 switch (input_mask->formatted.tni_vni & 0xFFFFFFFF) { 1786 case 0x0: 1787 /* Mask vxlan id */ 1788 fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI; 1789 break; 1790 case 0x00FFFFFF: 1791 fdirip6m |= IXGBE_FDIRIP6M_TNI_VNI_24; 1792 break; 1793 case 0xFFFFFFFF: 1794 break; 1795 default: 1796 DEBUGOUT(" Error on TNI/VNI byte mask\n"); 1797 return IXGBE_ERR_CONFIG; 1798 } 1799 1800 switch (input_mask->formatted.tunnel_type & 0xFFFF) { 1801 case 0x0: 1802 /* Mask turnnel type, fall through */ 1803 fdirip6m |= IXGBE_FDIRIP6M_TUNNEL_TYPE; 1804 case 0xFFFF: 1805 break; 1806 default: 1807 DEBUGOUT(" Error on tunnel type byte mask\n"); 1808 return IXGBE_ERR_CONFIG; 1809 } 1810 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIP6M, fdirip6m); 1811 1812 /* Set all bits in FDIRTCPM, FDIRUDPM, FDIRSIP4M and 1813 * FDIRDIP4M in cloud mode to allow L3/L3 packets to 1814 * tunnel. 1815 */ 1816 IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, 0xFFFFFFFF); 1817 IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, 0xFFFFFFFF); 1818 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, 0xFFFFFFFF); 1819 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, 0xFFFFFFFF); 1820 } 1821 1822 /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ 1823 IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); 1824 1825 if (!cloud_mode) { 1826 /* store the TCP/UDP port masks, bit reversed from port 1827 * layout */ 1828 fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); 1829 1830 /* write both the same so that UDP and TCP use the same mask */ 1831 IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); 1832 IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); 1833 /* also use it for SCTP */ 1834 switch (hw->mac.type) { 1835 case ixgbe_mac_X550: 1836 case ixgbe_mac_X550EM_x: 1837 IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm); 1838 break; 1839 default: 1840 break; 1841 } 1842 1843 /* store source and destination IP masks (big-enian) */ 1844 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, 1845 ~input_mask->formatted.src_ip[0]); 1846 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, 1847 ~input_mask->formatted.dst_ip[0]); 1848 } 1849 return IXGBE_SUCCESS; 1850 } 1851 1852 s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, 1853 union ixgbe_atr_input *input, 1854 u16 soft_id, u8 queue, bool cloud_mode) 1855 { 1856 u32 fdirport, fdirvlan, fdirhash, fdircmd; 1857 u32 addr_low, addr_high; 1858 u32 cloud_type = 0; 1859 s32 err; 1860 1861 DEBUGFUNC("ixgbe_fdir_write_perfect_filter_82599"); 1862 if (!cloud_mode) { 1863 /* currently IPv6 is not supported, must be programmed with 0 */ 1864 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), 1865 input->formatted.src_ip[0]); 1866 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), 1867 input->formatted.src_ip[1]); 1868 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), 1869 input->formatted.src_ip[2]); 1870 1871 /* record the source address (big-endian) */ 1872 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, 1873 input->formatted.src_ip[0]); 1874 1875 /* record the first 32 bits of the destination address 1876 * (big-endian) */ 1877 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, 1878 input->formatted.dst_ip[0]); 1879 1880 /* record source and destination port (little-endian)*/ 1881 fdirport = IXGBE_NTOHS(input->formatted.dst_port); 1882 fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; 1883 fdirport |= IXGBE_NTOHS(input->formatted.src_port); 1884 IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); 1885 } 1886 1887 /* record VLAN (little-endian) and flex_bytes(big-endian) */ 1888 fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); 1889 fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; 1890 fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id); 1891 IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); 1892 1893 if (cloud_mode) { 1894 if (input->formatted.tunnel_type != 0) 1895 cloud_type = 0x80000000; 1896 1897 addr_low = ((u32)input->formatted.inner_mac[0] | 1898 ((u32)input->formatted.inner_mac[1] << 8) | 1899 ((u32)input->formatted.inner_mac[2] << 16) | 1900 ((u32)input->formatted.inner_mac[3] << 24)); 1901 addr_high = ((u32)input->formatted.inner_mac[4] | 1902 ((u32)input->formatted.inner_mac[5] << 8)); 1903 cloud_type |= addr_high; 1904 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), addr_low); 1905 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), cloud_type); 1906 IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), input->formatted.tni_vni); 1907 } 1908 1909 /* configure FDIRHASH register */ 1910 fdirhash = input->formatted.bkt_hash; 1911 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; 1912 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1913 1914 /* 1915 * flush all previous writes to make certain registers are 1916 * programmed prior to issuing the command 1917 */ 1918 IXGBE_WRITE_FLUSH(hw); 1919 1920 /* configure FDIRCMD register */ 1921 fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | 1922 IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; 1923 if (queue == IXGBE_FDIR_DROP_QUEUE) 1924 fdircmd |= IXGBE_FDIRCMD_DROP; 1925 if (input->formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK) 1926 fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER; 1927 fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; 1928 fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; 1929 fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; 1930 1931 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); 1932 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1933 if (err) { 1934 DEBUGOUT("Flow Director command did not complete!\n"); 1935 return err; 1936 } 1937 1938 return IXGBE_SUCCESS; 1939 } 1940 1941 s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, 1942 union ixgbe_atr_input *input, 1943 u16 soft_id) 1944 { 1945 u32 fdirhash; 1946 u32 fdircmd; 1947 s32 err; 1948 1949 /* configure FDIRHASH register */ 1950 fdirhash = input->formatted.bkt_hash; 1951 fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; 1952 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1953 1954 /* flush hash to HW */ 1955 IXGBE_WRITE_FLUSH(hw); 1956 1957 /* Query if filter is present */ 1958 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); 1959 1960 err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd); 1961 if (err) { 1962 DEBUGOUT("Flow Director command did not complete!\n"); 1963 return err; 1964 } 1965 1966 /* if filter exists in hardware then remove it */ 1967 if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { 1968 IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); 1969 IXGBE_WRITE_FLUSH(hw); 1970 IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, 1971 IXGBE_FDIRCMD_CMD_REMOVE_FLOW); 1972 } 1973 1974 return IXGBE_SUCCESS; 1975 } 1976 1977 /** 1978 * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter 1979 * @hw: pointer to hardware structure 1980 * @input: input bitstream 1981 * @input_mask: mask for the input bitstream 1982 * @soft_id: software index for the filters 1983 * @queue: queue index to direct traffic to 1984 * 1985 * Note that the caller to this function must lock before calling, since the 1986 * hardware writes must be protected from one another. 1987 **/ 1988 s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, 1989 union ixgbe_atr_input *input, 1990 union ixgbe_atr_input *input_mask, 1991 u16 soft_id, u8 queue, bool cloud_mode) 1992 { 1993 s32 err = IXGBE_ERR_CONFIG; 1994 1995 DEBUGFUNC("ixgbe_fdir_add_perfect_filter_82599"); 1996 1997 /* 1998 * Check flow_type formatting, and bail out before we touch the hardware 1999 * if there's a configuration issue 2000 */ 2001 switch (input->formatted.flow_type) { 2002 case IXGBE_ATR_FLOW_TYPE_IPV4: 2003 case IXGBE_ATR_FLOW_TYPE_TUNNELED_IPV4: 2004 input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK; 2005 if (input->formatted.dst_port || input->formatted.src_port) { 2006 DEBUGOUT(" Error on src/dst port\n"); 2007 return IXGBE_ERR_CONFIG; 2008 } 2009 break; 2010 case IXGBE_ATR_FLOW_TYPE_SCTPV4: 2011 case IXGBE_ATR_FLOW_TYPE_TUNNELED_SCTPV4: 2012 if (input->formatted.dst_port || input->formatted.src_port) { 2013 DEBUGOUT(" Error on src/dst port\n"); 2014 return IXGBE_ERR_CONFIG; 2015 } 2016 case IXGBE_ATR_FLOW_TYPE_TCPV4: 2017 case IXGBE_ATR_FLOW_TYPE_TUNNELED_TCPV4: 2018 case IXGBE_ATR_FLOW_TYPE_UDPV4: 2019 case IXGBE_ATR_FLOW_TYPE_TUNNELED_UDPV4: 2020 input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | 2021 IXGBE_ATR_L4TYPE_MASK; 2022 break; 2023 default: 2024 DEBUGOUT(" Error on flow type input\n"); 2025 return err; 2026 } 2027 2028 /* program input mask into the HW */ 2029 err = ixgbe_fdir_set_input_mask_82599(hw, input_mask, cloud_mode); 2030 if (err) 2031 return err; 2032 2033 /* apply mask and compute/store hash */ 2034 ixgbe_atr_compute_perfect_hash_82599(input, input_mask); 2035 2036 /* program filters to filter memory */ 2037 return ixgbe_fdir_write_perfect_filter_82599(hw, input, 2038 soft_id, queue, cloud_mode); 2039 } 2040 2041 /** 2042 * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register 2043 * @hw: pointer to hardware structure 2044 * @reg: analog register to read 2045 * @val: read value 2046 * 2047 * Performs read operation to Omer analog register specified. 2048 **/ 2049 s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) 2050 { 2051 u32 core_ctl; 2052 2053 DEBUGFUNC("ixgbe_read_analog_reg8_82599"); 2054 2055 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | 2056 (reg << 8)); 2057 IXGBE_WRITE_FLUSH(hw); 2058 usec_delay(10); 2059 core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); 2060 *val = (u8)core_ctl; 2061 2062 return IXGBE_SUCCESS; 2063 } 2064 2065 /** 2066 * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register 2067 * @hw: pointer to hardware structure 2068 * @reg: atlas register to write 2069 * @val: value to write 2070 * 2071 * Performs write operation to Omer analog register specified. 2072 **/ 2073 s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) 2074 { 2075 u32 core_ctl; 2076 2077 DEBUGFUNC("ixgbe_write_analog_reg8_82599"); 2078 2079 core_ctl = (reg << 8) | val; 2080 IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); 2081 IXGBE_WRITE_FLUSH(hw); 2082 usec_delay(10); 2083 2084 return IXGBE_SUCCESS; 2085 } 2086 2087 /** 2088 * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx 2089 * @hw: pointer to hardware structure 2090 * 2091 * Starts the hardware using the generic start_hw function 2092 * and the generation start_hw function. 2093 * Then performs revision-specific operations, if any. 2094 **/ 2095 s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) 2096 { 2097 s32 ret_val = IXGBE_SUCCESS; 2098 2099 DEBUGFUNC("ixgbe_start_hw_82599"); 2100 2101 ret_val = ixgbe_start_hw_generic(hw); 2102 if (ret_val != IXGBE_SUCCESS) 2103 goto out; 2104 2105 ret_val = ixgbe_start_hw_gen2(hw); 2106 if (ret_val != IXGBE_SUCCESS) 2107 goto out; 2108 2109 /* We need to run link autotry after the driver loads */ 2110 hw->mac.autotry_restart = TRUE; 2111 2112 if (ret_val == IXGBE_SUCCESS) 2113 ret_val = ixgbe_verify_fw_version_82599(hw); 2114 out: 2115 return ret_val; 2116 } 2117 2118 /** 2119 * ixgbe_identify_phy_82599 - Get physical layer module 2120 * @hw: pointer to hardware structure 2121 * 2122 * Determines the physical layer module found on the current adapter. 2123 * If PHY already detected, maintains current PHY type in hw struct, 2124 * otherwise executes the PHY detection routine. 2125 **/ 2126 s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) 2127 { 2128 s32 status; 2129 2130 DEBUGFUNC("ixgbe_identify_phy_82599"); 2131 2132 /* Detect PHY if not unknown - returns success if already detected. */ 2133 status = ixgbe_identify_phy_generic(hw); 2134 if (status != IXGBE_SUCCESS) { 2135 /* 82599 10GBASE-T requires an external PHY */ 2136 if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) 2137 return status; 2138 else 2139 status = ixgbe_identify_module_generic(hw); 2140 } 2141 2142 /* Set PHY type none if no PHY detected */ 2143 if (hw->phy.type == ixgbe_phy_unknown) { 2144 hw->phy.type = ixgbe_phy_none; 2145 return IXGBE_SUCCESS; 2146 } 2147 2148 /* Return error if SFP module has been detected but is not supported */ 2149 if (hw->phy.type == ixgbe_phy_sfp_unsupported) 2150 return IXGBE_ERR_SFP_NOT_SUPPORTED; 2151 2152 return status; 2153 } 2154 2155 /** 2156 * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type 2157 * @hw: pointer to hardware structure 2158 * 2159 * Determines physical layer capabilities of the current configuration. 2160 **/ 2161 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) 2162 { 2163 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 2164 u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2165 u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 2166 u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; 2167 u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; 2168 u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 2169 u16 ext_ability = 0; 2170 2171 DEBUGFUNC("ixgbe_get_support_physical_layer_82599"); 2172 2173 hw->phy.ops.identify(hw); 2174 2175 switch (hw->phy.type) { 2176 case ixgbe_phy_tn: 2177 case ixgbe_phy_cu_unknown: 2178 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, 2179 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); 2180 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) 2181 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; 2182 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) 2183 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 2184 if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) 2185 physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; 2186 goto out; 2187 default: 2188 break; 2189 } 2190 2191 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 2192 case IXGBE_AUTOC_LMS_1G_AN: 2193 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 2194 if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { 2195 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | 2196 IXGBE_PHYSICAL_LAYER_1000BASE_BX; 2197 goto out; 2198 } else 2199 /* SFI mode so read SFP module */ 2200 goto sfp_check; 2201 break; 2202 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 2203 if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) 2204 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; 2205 else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) 2206 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 2207 else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) 2208 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; 2209 goto out; 2210 break; 2211 case IXGBE_AUTOC_LMS_10G_SERIAL: 2212 if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { 2213 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; 2214 goto out; 2215 } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) 2216 goto sfp_check; 2217 break; 2218 case IXGBE_AUTOC_LMS_KX4_KX_KR: 2219 case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: 2220 if (autoc & IXGBE_AUTOC_KX_SUPP) 2221 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; 2222 if (autoc & IXGBE_AUTOC_KX4_SUPP) 2223 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 2224 if (autoc & IXGBE_AUTOC_KR_SUPP) 2225 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; 2226 goto out; 2227 break; 2228 default: 2229 goto out; 2230 break; 2231 } 2232 2233 sfp_check: 2234 /* SFP check must be done last since DA modules are sometimes used to 2235 * test KR mode - we need to id KR mode correctly before SFP module. 2236 * Call identify_sfp because the pluggable module may have changed */ 2237 physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw); 2238 out: 2239 return physical_layer; 2240 } 2241 2242 /** 2243 * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 2244 * @hw: pointer to hardware structure 2245 * @regval: register value to write to RXCTRL 2246 * 2247 * Enables the Rx DMA unit for 82599 2248 **/ 2249 s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) 2250 { 2251 2252 DEBUGFUNC("ixgbe_enable_rx_dma_82599"); 2253 2254 /* 2255 * Workaround for 82599 silicon errata when enabling the Rx datapath. 2256 * If traffic is incoming before we enable the Rx unit, it could hang 2257 * the Rx DMA unit. Therefore, make sure the security engine is 2258 * completely disabled prior to enabling the Rx unit. 2259 */ 2260 2261 hw->mac.ops.disable_sec_rx_path(hw); 2262 2263 if (regval & IXGBE_RXCTRL_RXEN) 2264 ixgbe_enable_rx(hw); 2265 else 2266 ixgbe_disable_rx(hw); 2267 2268 hw->mac.ops.enable_sec_rx_path(hw); 2269 2270 return IXGBE_SUCCESS; 2271 } 2272 2273 /** 2274 * ixgbe_verify_fw_version_82599 - verify FW version for 82599 2275 * @hw: pointer to hardware structure 2276 * 2277 * Verifies that installed the firmware version is 0.6 or higher 2278 * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. 2279 * 2280 * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or 2281 * if the FW version is not supported. 2282 **/ 2283 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) 2284 { 2285 s32 status = IXGBE_ERR_EEPROM_VERSION; 2286 u16 fw_offset, fw_ptp_cfg_offset; 2287 u16 fw_version; 2288 2289 DEBUGFUNC("ixgbe_verify_fw_version_82599"); 2290 2291 /* firmware check is only necessary for SFI devices */ 2292 if (hw->phy.media_type != ixgbe_media_type_fiber) { 2293 status = IXGBE_SUCCESS; 2294 goto fw_version_out; 2295 } 2296 2297 /* get the offset to the Firmware Module block */ 2298 if (hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset)) { 2299 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 2300 "eeprom read at offset %d failed", IXGBE_FW_PTR); 2301 return IXGBE_ERR_EEPROM_VERSION; 2302 } 2303 2304 if ((fw_offset == 0) || (fw_offset == 0xFFFF)) 2305 goto fw_version_out; 2306 2307 /* get the offset to the Pass Through Patch Configuration block */ 2308 if (hw->eeprom.ops.read(hw, (fw_offset + 2309 IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), 2310 &fw_ptp_cfg_offset)) { 2311 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 2312 "eeprom read at offset %d failed", 2313 fw_offset + 2314 IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR); 2315 return IXGBE_ERR_EEPROM_VERSION; 2316 } 2317 2318 if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) 2319 goto fw_version_out; 2320 2321 /* get the firmware version */ 2322 if (hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + 2323 IXGBE_FW_PATCH_VERSION_4), &fw_version)) { 2324 ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 2325 "eeprom read at offset %d failed", 2326 fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4); 2327 return IXGBE_ERR_EEPROM_VERSION; 2328 } 2329 2330 if (fw_version > 0x5) 2331 status = IXGBE_SUCCESS; 2332 2333 fw_version_out: 2334 return status; 2335 } 2336 2337 /** 2338 * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. 2339 * @hw: pointer to hardware structure 2340 * 2341 * Returns TRUE if the LESM FW module is present and enabled. Otherwise 2342 * returns FALSE. Smart Speed must be disabled if LESM FW module is enabled. 2343 **/ 2344 bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) 2345 { 2346 bool lesm_enabled = FALSE; 2347 u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; 2348 s32 status; 2349 2350 DEBUGFUNC("ixgbe_verify_lesm_fw_enabled_82599"); 2351 2352 /* get the offset to the Firmware Module block */ 2353 status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); 2354 2355 if ((status != IXGBE_SUCCESS) || 2356 (fw_offset == 0) || (fw_offset == 0xFFFF)) 2357 goto out; 2358 2359 /* get the offset to the LESM Parameters block */ 2360 status = hw->eeprom.ops.read(hw, (fw_offset + 2361 IXGBE_FW_LESM_PARAMETERS_PTR), 2362 &fw_lesm_param_offset); 2363 2364 if ((status != IXGBE_SUCCESS) || 2365 (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) 2366 goto out; 2367 2368 /* get the LESM state word */ 2369 status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + 2370 IXGBE_FW_LESM_STATE_1), 2371 &fw_lesm_state); 2372 2373 if ((status == IXGBE_SUCCESS) && 2374 (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) 2375 lesm_enabled = TRUE; 2376 2377 out: 2378 return lesm_enabled; 2379 } 2380 2381 /** 2382 * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using 2383 * fastest available method 2384 * 2385 * @hw: pointer to hardware structure 2386 * @offset: offset of word in EEPROM to read 2387 * @words: number of words 2388 * @data: word(s) read from the EEPROM 2389 * 2390 * Retrieves 16 bit word(s) read from EEPROM 2391 **/ 2392 static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, 2393 u16 words, u16 *data) 2394 { 2395 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 2396 s32 ret_val = IXGBE_ERR_CONFIG; 2397 2398 DEBUGFUNC("ixgbe_read_eeprom_buffer_82599"); 2399 2400 /* 2401 * If EEPROM is detected and can be addressed using 14 bits, 2402 * use EERD otherwise use bit bang 2403 */ 2404 if ((eeprom->type == ixgbe_eeprom_spi) && 2405 (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) 2406 ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, 2407 data); 2408 else 2409 ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, 2410 words, 2411 data); 2412 2413 return ret_val; 2414 } 2415 2416 /** 2417 * ixgbe_read_eeprom_82599 - Read EEPROM word using 2418 * fastest available method 2419 * 2420 * @hw: pointer to hardware structure 2421 * @offset: offset of word in the EEPROM to read 2422 * @data: word read from the EEPROM 2423 * 2424 * Reads a 16 bit word from the EEPROM 2425 **/ 2426 static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, 2427 u16 offset, u16 *data) 2428 { 2429 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 2430 s32 ret_val = IXGBE_ERR_CONFIG; 2431 2432 DEBUGFUNC("ixgbe_read_eeprom_82599"); 2433 2434 /* 2435 * If EEPROM is detected and can be addressed using 14 bits, 2436 * use EERD otherwise use bit bang 2437 */ 2438 if ((eeprom->type == ixgbe_eeprom_spi) && 2439 (offset <= IXGBE_EERD_MAX_ADDR)) 2440 ret_val = ixgbe_read_eerd_generic(hw, offset, data); 2441 else 2442 ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); 2443 2444 return ret_val; 2445 } 2446 2447 /** 2448 * ixgbe_reset_pipeline_82599 - perform pipeline reset 2449 * 2450 * @hw: pointer to hardware structure 2451 * 2452 * Reset pipeline by asserting Restart_AN together with LMS change to ensure 2453 * full pipeline reset. This function assumes the SW/FW lock is held. 2454 **/ 2455 s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw) 2456 { 2457 s32 ret_val; 2458 u32 anlp1_reg = 0; 2459 u32 i, autoc_reg, autoc2_reg; 2460 2461 /* Enable link if disabled in NVM */ 2462 autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2); 2463 if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) { 2464 autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK; 2465 IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg); 2466 IXGBE_WRITE_FLUSH(hw); 2467 } 2468 2469 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 2470 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 2471 /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */ 2472 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, 2473 autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT)); 2474 /* Wait for AN to leave state 0 */ 2475 for (i = 0; i < 10; i++) { 2476 msec_delay(4); 2477 anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); 2478 if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK) 2479 break; 2480 } 2481 2482 if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) { 2483 DEBUGOUT("auto negotiation not completed\n"); 2484 ret_val = IXGBE_ERR_RESET_FAILED; 2485 goto reset_pipeline_out; 2486 } 2487 2488 ret_val = IXGBE_SUCCESS; 2489 2490 reset_pipeline_out: 2491 /* Write AUTOC register with original LMS field and Restart_AN */ 2492 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 2493 IXGBE_WRITE_FLUSH(hw); 2494 2495 return ret_val; 2496 } 2497 2498 /** 2499 * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C 2500 * @hw: pointer to hardware structure 2501 * @byte_offset: byte offset to read 2502 * @data: value read 2503 * 2504 * Performs byte read operation to SFP module's EEPROM over I2C interface at 2505 * a specified device address. 2506 **/ 2507 static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 2508 u8 dev_addr, u8 *data) 2509 { 2510 u32 esdp; 2511 s32 status; 2512 s32 timeout = 200; 2513 2514 DEBUGFUNC("ixgbe_read_i2c_byte_82599"); 2515 2516 if (hw->phy.qsfp_shared_i2c_bus == TRUE) { 2517 /* Acquire I2C bus ownership. */ 2518 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2519 esdp |= IXGBE_ESDP_SDP0; 2520 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2521 IXGBE_WRITE_FLUSH(hw); 2522 2523 while (timeout) { 2524 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2525 if (esdp & IXGBE_ESDP_SDP1) 2526 break; 2527 2528 msec_delay(5); 2529 timeout--; 2530 } 2531 2532 if (!timeout) { 2533 DEBUGOUT("Driver can't access resource," 2534 " acquiring I2C bus timeout.\n"); 2535 status = IXGBE_ERR_I2C; 2536 goto release_i2c_access; 2537 } 2538 } 2539 2540 status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); 2541 2542 release_i2c_access: 2543 2544 if (hw->phy.qsfp_shared_i2c_bus == TRUE) { 2545 /* Release I2C bus ownership. */ 2546 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2547 esdp &= ~IXGBE_ESDP_SDP0; 2548 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2549 IXGBE_WRITE_FLUSH(hw); 2550 } 2551 2552 return status; 2553 } 2554 2555 /** 2556 * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C 2557 * @hw: pointer to hardware structure 2558 * @byte_offset: byte offset to write 2559 * @data: value to write 2560 * 2561 * Performs byte write operation to SFP module's EEPROM over I2C interface at 2562 * a specified device address. 2563 **/ 2564 static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, 2565 u8 dev_addr, u8 data) 2566 { 2567 u32 esdp; 2568 s32 status; 2569 s32 timeout = 200; 2570 2571 DEBUGFUNC("ixgbe_write_i2c_byte_82599"); 2572 2573 if (hw->phy.qsfp_shared_i2c_bus == TRUE) { 2574 /* Acquire I2C bus ownership. */ 2575 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2576 esdp |= IXGBE_ESDP_SDP0; 2577 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2578 IXGBE_WRITE_FLUSH(hw); 2579 2580 while (timeout) { 2581 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2582 if (esdp & IXGBE_ESDP_SDP1) 2583 break; 2584 2585 msec_delay(5); 2586 timeout--; 2587 } 2588 2589 if (!timeout) { 2590 DEBUGOUT("Driver can't access resource," 2591 " acquiring I2C bus timeout.\n"); 2592 status = IXGBE_ERR_I2C; 2593 goto release_i2c_access; 2594 } 2595 } 2596 2597 status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); 2598 2599 release_i2c_access: 2600 2601 if (hw->phy.qsfp_shared_i2c_bus == TRUE) { 2602 /* Release I2C bus ownership. */ 2603 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 2604 esdp &= ~IXGBE_ESDP_SDP0; 2605 IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 2606 IXGBE_WRITE_FLUSH(hw); 2607 } 2608 2609 return status; 2610 } 2611