xref: /freebsd/sys/dev/iwn/if_iwn_chip_cfg.h (revision 2e3507c25e42292b45a5482e116d278f5515d04d)
1 /*-
2  * Copyright (c) 2013 Cedric GROSS <cg@cgross.info>
3  * Copyright (c) 2011 Intel Corporation
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #ifndef	__IF_IWN_CHIP_CFG_H__
19 #define	__IF_IWN_CHIP_CFG_H__
20 
21 /* ==========================================================================
22  *                                  NIC PARAMETERS
23  *
24  * ==========================================================================
25  */
26 
27 /*
28  * Flags for managing calibration result. See calib_need
29  * in iwn_base_params struct
30  *
31  * These are bitmasks that determine which indexes in the calibcmd
32  * array are pushed up.
33  */
34 #define IWN_FLG_NEED_PHY_CALIB_DC		(1<<0)
35 #define IWN_FLG_NEED_PHY_CALIB_LO		(1<<1)
36 #define IWN_FLG_NEED_PHY_CALIB_TX_IQ		(1<<2)
37 #define IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC	(1<<3)
38 #define IWN_FLG_NEED_PHY_CALIB_BASE_BAND	(1<<4)
39 /*
40  * These aren't (yet) included in the calibcmd array, but
41  * are used as flags for which calibrations to use.
42  *
43  * XXX I think they should be named differently and
44  * stuffed in a different member in the config struct!
45  */
46 #define IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET	(1<<5)
47 #define IWN_FLG_NEED_PHY_CALIB_CRYSTAL		(1<<6)
48 #define IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2	(1<<7)
49 
50 /*
51  * Each chip has a different threshold for PLCP errors that should trigger a
52  * retune.
53  */
54 #define	IWN_PLCP_ERR_DEFAULT_THRESHOLD		50
55 #define	IWN_PLCP_ERR_LONG_THRESHOLD		100
56 #define	IWN_PLCP_ERR_EXT_LONG_THRESHOLD		200
57 
58 /*
59  * Define some parameters for managing different NIC.
60  * Refer to linux specific file like iwl-xxxx.c to determine correct value
61  * for NIC.
62  *
63  * @max_ll_items: max number of OTP blocks
64  * @shadow_ram_support: shadow support for OTP memory
65  * @shadow_reg_enable: HW shadhow register bit
66  * @no_idle_support: do not support idle mode
67  * @advanced_bt_coexist : Advanced BT management
68  * @bt_session_2 : NIC need a new struct for configure BT coexistence. Needed
69  *   only if advanced_bt_coexist is true
70  * @bt_sco_disable :
71  * @additional_nic_config: For 6005 series
72  * @iq_invert : ? But need it for N 2000 series
73  * @regulatory_bands : XXX
74  * @enhanced_TX_power : EEPROM Has advanced TX power options. Set 'True'
75  *    if update_enhanced_txpower = iwl_eeprom_enhanced_txpower.
76  *    See iwl-agn-devices.c file to determine that(enhanced_txpower)
77  * @need_temp_offset_calib : Need to compute some temp offset for calibration.
78  * @calib_need : Use IWN_FLG_NEED_PHY_CALIB_* flags to specify which
79  *    calibration data ucode need. See calib_init_cfg in iwl-xxxx.c
80  *    linux kernel file
81  * @support_hostap: Define IEEE80211_C_HOSTAP for ic_caps
82  * @no_multi_vaps: See iwn_vap_create
83  * @additional_gp_drv_bit : Specific bit to defined during nic_config
84  * @bt_mode: BT configuration mode
85  */
86 enum bt_mode_enum {
87 	IWN_BT_NONE,
88 	IWN_BT_SIMPLE,
89 	IWN_BT_ADVANCED
90 };
91 
92 struct iwn_base_params {
93 	uint32_t	pll_cfg_val;
94 	const uint16_t	max_ll_items;
95 #define IWN_OTP_MAX_LL_ITEMS_1000		(3)	/* OTP blocks for 1000 */
96 #define IWN_OTP_MAX_LL_ITEMS_6x00		(4)	/* OTP blocks for 6x00 */
97 #define IWN_OTP_MAX_LL_ITEMS_6x50		(7)	/* OTP blocks for 6x50 */
98 #define IWN_OTP_MAX_LL_ITEMS_2x00		(4)	/* OTP blocks for 2x00 */
99 	const bool	shadow_ram_support;
100 	const bool	shadow_reg_enable;
101 	const bool	bt_session_2;
102 	const bool	bt_sco_disable;
103 	const bool	additional_nic_config;
104 	const uint32_t	*regulatory_bands;
105 	const bool	enhanced_TX_power;
106 	const uint16_t	calib_need;
107 	const bool	support_hostap;
108 	const bool	no_multi_vaps;
109 	uint8_t	additional_gp_drv_bit;
110 	enum bt_mode_enum	bt_mode;
111 	uint32_t	plcp_err_threshold;
112 };
113 
114 static const struct iwn_base_params iwn5000_base_params = {
115 	.pll_cfg_val = IWN_ANA_PLL_INIT,	/* pll_cfg_val; */
116 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,	/* max_ll_items */
117 	.shadow_ram_support = false,	/* shadow_ram_support */
118 	.shadow_reg_enable = false,	/* shadow_reg_enable */
119 	.bt_session_2 = false,	/* bt_session_2 */
120 	.bt_sco_disable = true,	/* bt_sco_disable */
121 	.additional_nic_config = false,	/* additional_nic_config */
122 	.regulatory_bands = iwn5000_regulatory_bands,	/* regulatory_bands */
123 	.enhanced_TX_power = false,	/* enhanced_TX_power */
124 	.calib_need =
125 	    ( IWN_FLG_NEED_PHY_CALIB_LO
126 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
127 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
128 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
129 	.support_hostap = false,	/* support_hostap */
130 	.no_multi_vaps = true,	/* no_multi_vaps */
131 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,	/* additional_gp_drv_bit */
132 	.bt_mode = IWN_BT_NONE,	/* bt_mode */
133 	.plcp_err_threshold = IWN_PLCP_ERR_LONG_THRESHOLD,
134 };
135 
136 /*
137  * 4965 support
138  */
139 static const struct iwn_base_params iwn4965_base_params = {
140 	.pll_cfg_val = 0,				/* pll_cfg_val; */
141 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,	/* max_ll_items - ignored for 4965 */
142 	.shadow_ram_support = true,	/* shadow_ram_support */
143 	.shadow_reg_enable = false,	/* shadow_reg_enable */
144 	.bt_session_2 = false,	/* bt_session_2 XXX unknown? */
145 	.bt_sco_disable = true,	/* bt_sco_disable XXX unknown? */
146 	.additional_nic_config = false,	/* additional_nic_config - not for 4965 */
147 	.regulatory_bands = iwn5000_regulatory_bands,	/* regulatory_bands */
148 	.enhanced_TX_power = false,	/* enhanced_TX_power - not for 4965 */
149 	.calib_need =
150 	    (IWN_FLG_NEED_PHY_CALIB_DC
151 	    | IWN_FLG_NEED_PHY_CALIB_LO
152 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
153 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
154 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
155 	.support_hostap = false,	/* support_hostap - XXX should work on fixing! */
156 	.no_multi_vaps = true,	/* no_multi_vaps - XXX should work on fixing!  */
157 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,	/* additional_gp_drv_bit */
158 	.bt_mode = IWN_BT_SIMPLE,	/* bt_mode */
159 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
160 };
161 
162 
163 static const struct iwn_base_params iwn2000_base_params = {
164 	.pll_cfg_val = 0,
165 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_2x00,
166 	.shadow_ram_support = true,
167 	.shadow_reg_enable = false,
168 	.bt_session_2 = false,
169 	.bt_sco_disable = true,
170 	.additional_nic_config = false,
171 	.regulatory_bands = iwn2030_regulatory_bands,
172 	.enhanced_TX_power = true,
173 	.calib_need =
174 	    (IWN_FLG_NEED_PHY_CALIB_DC
175 	    | IWN_FLG_NEED_PHY_CALIB_LO
176 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
177 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
178 	    | IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2 ),
179 	.support_hostap = true,
180 	.no_multi_vaps = false,
181 	.additional_gp_drv_bit = IWN_GP_DRIVER_REG_BIT_RADIO_IQ_INVERT,
182 	.bt_mode = IWN_BT_NONE,
183 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
184 };
185 
186 static const struct iwn_base_params iwn2030_base_params = {
187 	.pll_cfg_val = 0,
188 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_2x00,
189 	.shadow_ram_support = true,
190 	.shadow_reg_enable = false,     /* XXX check? */
191 	.bt_session_2 = true,
192 	.bt_sco_disable = true,
193 	.additional_nic_config = false,
194 	.regulatory_bands = iwn2030_regulatory_bands,
195 	.enhanced_TX_power = true,
196 	.calib_need =
197 	    (IWN_FLG_NEED_PHY_CALIB_DC
198 	    | IWN_FLG_NEED_PHY_CALIB_LO
199 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
200 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
201 	    | IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2 ),
202 	.support_hostap = true,
203 	.no_multi_vaps = false,
204 	.additional_gp_drv_bit = IWN_GP_DRIVER_REG_BIT_RADIO_IQ_INVERT,
205 	.bt_mode = IWN_BT_ADVANCED,
206 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
207 };
208 
209 static const struct iwn_base_params iwn1000_base_params = {
210 	.pll_cfg_val = IWN_ANA_PLL_INIT,
211 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_1000,
212 	.shadow_ram_support = false,
213 	.shadow_reg_enable = false,	/* XXX check? */
214 	.bt_session_2 = false,
215 	.bt_sco_disable = false,
216 	.additional_nic_config = false,
217 	.regulatory_bands = iwn5000_regulatory_bands,
218 	.enhanced_TX_power = false,
219 	.calib_need =
220 	    ( IWN_FLG_NEED_PHY_CALIB_LO
221 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC
222 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
223 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
224 	    ),
225 	.support_hostap = false,
226 	.no_multi_vaps = true,
227 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
228 	/* XXX 1000 - no BT */
229 	.bt_mode = IWN_BT_SIMPLE,
230 	.plcp_err_threshold = IWN_PLCP_ERR_EXT_LONG_THRESHOLD,
231 };
232 static const struct iwn_base_params iwn_6000_base_params = {
233 	.pll_cfg_val = 0,
234 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
235 	.shadow_ram_support = true,
236 	.shadow_reg_enable = true,
237 	.bt_session_2 = false,
238 	.bt_sco_disable = false,
239 	.additional_nic_config = false,
240 	.regulatory_bands = iwn6000_regulatory_bands,
241 	.enhanced_TX_power = true,
242 	.calib_need =
243 	    (IWN_FLG_NEED_PHY_CALIB_DC
244 	    | IWN_FLG_NEED_PHY_CALIB_LO
245 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
246 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
247 	.support_hostap = false,
248 	.no_multi_vaps = true,
249 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
250 	.bt_mode = IWN_BT_SIMPLE,
251 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
252 };
253 static const struct iwn_base_params iwn_6000i_base_params = {
254 	.pll_cfg_val = 0,
255 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
256 	.shadow_ram_support = true,
257 	.shadow_reg_enable = true,
258 	.bt_session_2 = false,
259 	.bt_sco_disable = true,
260 	.additional_nic_config = false,
261 	.regulatory_bands = iwn6000_regulatory_bands,
262 	.enhanced_TX_power = true,
263 	.calib_need =
264 	    (IWN_FLG_NEED_PHY_CALIB_DC
265 	    | IWN_FLG_NEED_PHY_CALIB_LO
266 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
267 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
268 	.support_hostap = false,
269 	.no_multi_vaps = true,
270 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
271 	.bt_mode = IWN_BT_SIMPLE,
272 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
273 };
274 static const struct iwn_base_params iwn_6000g2_base_params = {
275 	.pll_cfg_val = 0,
276 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
277 	.shadow_ram_support = true,
278 	.shadow_reg_enable = true,
279 	.bt_session_2 = false,
280 	.bt_sco_disable = true,
281 	.additional_nic_config = false,
282 	.regulatory_bands = iwn6000_regulatory_bands,
283 	.enhanced_TX_power = true,
284 	.calib_need =
285 	    (IWN_FLG_NEED_PHY_CALIB_DC
286 	    | IWN_FLG_NEED_PHY_CALIB_LO
287 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
288 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
289 	    | IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
290 	.support_hostap = false,
291 	.no_multi_vaps = true,
292 	.additional_gp_drv_bit = 0,
293 	.bt_mode = IWN_BT_SIMPLE,
294 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
295 };
296 
297 static const struct iwn_base_params iwn_6050_base_params = {
298 	.pll_cfg_val = 0,
299 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x50,
300 	.shadow_ram_support = true,
301 	.shadow_reg_enable = true,
302 	.bt_session_2 = false,
303 	.bt_sco_disable = true,
304 	.additional_nic_config = true,
305 	.regulatory_bands = iwn6000_regulatory_bands,
306 	.enhanced_TX_power = true,
307 	.calib_need =
308 	    (IWN_FLG_NEED_PHY_CALIB_LO
309 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
310 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
311 	.support_hostap = false,
312 	.no_multi_vaps = true,
313 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
314 	.bt_mode = IWN_BT_SIMPLE,
315 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
316 };
317 static const struct iwn_base_params iwn_6150_base_params = {
318 	.pll_cfg_val = 0,
319 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x50,
320 	.shadow_ram_support = true,
321 	.shadow_reg_enable = true,
322 	.bt_session_2 = false,
323 	.bt_sco_disable = true,
324 	.additional_nic_config = true,
325 	.regulatory_bands = iwn6000_regulatory_bands,
326 	.enhanced_TX_power = true,
327 	.calib_need =
328 	    (IWN_FLG_NEED_PHY_CALIB_LO
329 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
330 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND),
331 	.support_hostap = false,
332 	.no_multi_vaps = true,
333 	.additional_gp_drv_bit = IWN_GP_DRIVER_6050_1X2,
334 	.bt_mode = IWN_BT_SIMPLE,
335 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
336 };
337 
338 /* IWL_DEVICE_6035 & IWL_DEVICE_6030 */
339 static const struct iwn_base_params iwn_6000g2b_base_params = {
340 	.pll_cfg_val = 0,
341 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
342 	.shadow_ram_support = true,
343 	.shadow_reg_enable = true,
344 	.bt_session_2 = false,
345 	.bt_sco_disable = true,
346 	.additional_nic_config = false,
347 	.regulatory_bands = iwn6000_regulatory_bands,
348 	.enhanced_TX_power = true,
349 	.calib_need =
350 	    (IWN_FLG_NEED_PHY_CALIB_DC
351 	    | IWN_FLG_NEED_PHY_CALIB_LO
352 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
353 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
354 	    | IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
355 	.support_hostap = false,
356 	.no_multi_vaps = true,
357 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
358 	.bt_mode = IWN_BT_ADVANCED,
359 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
360 };
361 
362 /*
363  * 6235 series NICs.
364  */
365 static const struct iwn_base_params iwn_6235_base_params = {
366 	.pll_cfg_val = 0,
367 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
368 	.shadow_ram_support = true,
369 	.shadow_reg_enable = true,
370 	.bt_session_2 = false,
371 	.bt_sco_disable = true,
372 	.additional_nic_config = true,
373 	.regulatory_bands = iwn6000_regulatory_bands,
374 	.enhanced_TX_power = true,
375 	.calib_need =
376 	    (IWN_FLG_NEED_PHY_CALIB_DC
377 	    | IWN_FLG_NEED_PHY_CALIB_LO
378 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
379 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND
380 	    | IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET ),
381 	.support_hostap = false,
382 	.no_multi_vaps = true,
383 	.additional_gp_drv_bit = 0,
384 	.bt_mode = IWN_BT_ADVANCED,
385 	.plcp_err_threshold = IWN_PLCP_ERR_DEFAULT_THRESHOLD,
386 };
387 
388 static const struct iwn_base_params iwn_5x50_base_params = {
389 	.pll_cfg_val = IWN_ANA_PLL_INIT,
390 	.max_ll_items = IWN_OTP_MAX_LL_ITEMS_6x00,
391 	.shadow_ram_support = true,
392 	.shadow_reg_enable = false,
393 	.bt_session_2 = false,
394 	.bt_sco_disable = true,
395 	.additional_nic_config = false,
396 	.regulatory_bands = iwn5000_regulatory_bands,
397 	.enhanced_TX_power =false,
398 	.calib_need =
399 	    (IWN_FLG_NEED_PHY_CALIB_DC
400 	    | IWN_FLG_NEED_PHY_CALIB_LO
401 	    | IWN_FLG_NEED_PHY_CALIB_TX_IQ
402 	    | IWN_FLG_NEED_PHY_CALIB_BASE_BAND ),
403 	.support_hostap = false,
404 	.no_multi_vaps = true,
405 	.additional_gp_drv_bit = IWN_GP_DRIVER_NONE,
406 	.bt_mode = IWN_BT_SIMPLE,
407 	.plcp_err_threshold = IWN_PLCP_ERR_LONG_THRESHOLD,
408 };
409 
410 #endif	/* __IF_IWN_CHIP_CFG_H__ */
411