1 /*- 2 * Copyright (c) 2007-2009 Damien Bergamini <damien.bergamini@free.fr> 3 * Copyright (c) 2008 Benjamin Close <benjsc@FreeBSD.org> 4 * Copyright (c) 2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2011 Intel Corporation 6 * Copyright (c) 2013 Cedric GROSS <c.gross@kreiz-it.fr> 7 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org> 8 * 9 * Permission to use, copy, modify, and distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22 /* 23 * Driver for Intel WiFi Link 4965 and 1000/5000/6000 Series 802.11 network 24 * adapters. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_wlan.h" 31 #include "opt_iwn.h" 32 33 #include <sys/param.h> 34 #include <sys/sockio.h> 35 #include <sys/sysctl.h> 36 #include <sys/mbuf.h> 37 #include <sys/kernel.h> 38 #include <sys/socket.h> 39 #include <sys/systm.h> 40 #include <sys/malloc.h> 41 #include <sys/bus.h> 42 #include <sys/conf.h> 43 #include <sys/rman.h> 44 #include <sys/endian.h> 45 #include <sys/firmware.h> 46 #include <sys/limits.h> 47 #include <sys/module.h> 48 #include <sys/priv.h> 49 #include <sys/queue.h> 50 #include <sys/taskqueue.h> 51 52 #include <machine/bus.h> 53 #include <machine/resource.h> 54 #include <machine/clock.h> 55 56 #include <dev/pci/pcireg.h> 57 #include <dev/pci/pcivar.h> 58 59 #include <net/if.h> 60 #include <net/if_var.h> 61 #include <net/if_dl.h> 62 #include <net/if_media.h> 63 64 #include <netinet/in.h> 65 #include <netinet/if_ether.h> 66 67 #include <net80211/ieee80211_var.h> 68 #include <net80211/ieee80211_radiotap.h> 69 #include <net80211/ieee80211_regdomain.h> 70 #include <net80211/ieee80211_ratectl.h> 71 72 #include <dev/iwn/if_iwnreg.h> 73 #include <dev/iwn/if_iwnvar.h> 74 #include <dev/iwn/if_iwn_devid.h> 75 #include <dev/iwn/if_iwn_chip_cfg.h> 76 #include <dev/iwn/if_iwn_debug.h> 77 #include <dev/iwn/if_iwn_ioctl.h> 78 79 struct iwn_ident { 80 uint16_t vendor; 81 uint16_t device; 82 const char *name; 83 }; 84 85 static const struct iwn_ident iwn_ident_table[] = { 86 { 0x8086, IWN_DID_6x05_1, "Intel Centrino Advanced-N 6205" }, 87 { 0x8086, IWN_DID_1000_1, "Intel Centrino Wireless-N 1000" }, 88 { 0x8086, IWN_DID_1000_2, "Intel Centrino Wireless-N 1000" }, 89 { 0x8086, IWN_DID_6x05_2, "Intel Centrino Advanced-N 6205" }, 90 { 0x8086, IWN_DID_6050_1, "Intel Centrino Advanced-N + WiMAX 6250" }, 91 { 0x8086, IWN_DID_6050_2, "Intel Centrino Advanced-N + WiMAX 6250" }, 92 { 0x8086, IWN_DID_x030_1, "Intel Centrino Wireless-N 1030" }, 93 { 0x8086, IWN_DID_x030_2, "Intel Centrino Wireless-N 1030" }, 94 { 0x8086, IWN_DID_x030_3, "Intel Centrino Advanced-N 6230" }, 95 { 0x8086, IWN_DID_x030_4, "Intel Centrino Advanced-N 6230" }, 96 { 0x8086, IWN_DID_6150_1, "Intel Centrino Wireless-N + WiMAX 6150" }, 97 { 0x8086, IWN_DID_6150_2, "Intel Centrino Wireless-N + WiMAX 6150" }, 98 { 0x8086, IWN_DID_2x00_1, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 99 { 0x8086, IWN_DID_2x00_2, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 100 /* XXX 2200D is IWN_SDID_2x00_4; there's no way to express this here! */ 101 { 0x8086, IWN_DID_2x30_1, "Intel Centrino Wireless-N 2230" }, 102 { 0x8086, IWN_DID_2x30_2, "Intel Centrino Wireless-N 2230" }, 103 { 0x8086, IWN_DID_130_1, "Intel Centrino Wireless-N 130" }, 104 { 0x8086, IWN_DID_130_2, "Intel Centrino Wireless-N 130" }, 105 { 0x8086, IWN_DID_100_1, "Intel Centrino Wireless-N 100" }, 106 { 0x8086, IWN_DID_100_2, "Intel Centrino Wireless-N 100" }, 107 { 0x8086, IWN_DID_105_1, "Intel Centrino Wireless-N 105" }, 108 { 0x8086, IWN_DID_105_2, "Intel Centrino Wireless-N 105" }, 109 { 0x8086, IWN_DID_135_1, "Intel Centrino Wireless-N 135" }, 110 { 0x8086, IWN_DID_135_2, "Intel Centrino Wireless-N 135" }, 111 { 0x8086, IWN_DID_4965_1, "Intel Wireless WiFi Link 4965" }, 112 { 0x8086, IWN_DID_6x00_1, "Intel Centrino Ultimate-N 6300" }, 113 { 0x8086, IWN_DID_6x00_2, "Intel Centrino Advanced-N 6200" }, 114 { 0x8086, IWN_DID_4965_2, "Intel Wireless WiFi Link 4965" }, 115 { 0x8086, IWN_DID_4965_3, "Intel Wireless WiFi Link 4965" }, 116 { 0x8086, IWN_DID_5x00_1, "Intel WiFi Link 5100" }, 117 { 0x8086, IWN_DID_4965_4, "Intel Wireless WiFi Link 4965" }, 118 { 0x8086, IWN_DID_5x00_3, "Intel Ultimate N WiFi Link 5300" }, 119 { 0x8086, IWN_DID_5x00_4, "Intel Ultimate N WiFi Link 5300" }, 120 { 0x8086, IWN_DID_5x00_2, "Intel WiFi Link 5100" }, 121 { 0x8086, IWN_DID_6x00_3, "Intel Centrino Ultimate-N 6300" }, 122 { 0x8086, IWN_DID_6x00_4, "Intel Centrino Advanced-N 6200" }, 123 { 0x8086, IWN_DID_5x50_1, "Intel WiMAX/WiFi Link 5350" }, 124 { 0x8086, IWN_DID_5x50_2, "Intel WiMAX/WiFi Link 5350" }, 125 { 0x8086, IWN_DID_5x50_3, "Intel WiMAX/WiFi Link 5150" }, 126 { 0x8086, IWN_DID_5x50_4, "Intel WiMAX/WiFi Link 5150" }, 127 { 0x8086, IWN_DID_6035_1, "Intel Centrino Advanced 6235" }, 128 { 0x8086, IWN_DID_6035_2, "Intel Centrino Advanced 6235" }, 129 { 0, 0, NULL } 130 }; 131 132 static int iwn_probe(device_t); 133 static int iwn_attach(device_t); 134 static void iwn4965_attach(struct iwn_softc *, uint16_t); 135 static void iwn5000_attach(struct iwn_softc *, uint16_t); 136 static int iwn_config_specific(struct iwn_softc *, uint16_t); 137 static void iwn_radiotap_attach(struct iwn_softc *); 138 static void iwn_sysctlattach(struct iwn_softc *); 139 static struct ieee80211vap *iwn_vap_create(struct ieee80211com *, 140 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 141 const uint8_t [IEEE80211_ADDR_LEN], 142 const uint8_t [IEEE80211_ADDR_LEN]); 143 static void iwn_vap_delete(struct ieee80211vap *); 144 static int iwn_detach(device_t); 145 static int iwn_shutdown(device_t); 146 static int iwn_suspend(device_t); 147 static int iwn_resume(device_t); 148 static int iwn_nic_lock(struct iwn_softc *); 149 static int iwn_eeprom_lock(struct iwn_softc *); 150 static int iwn_init_otprom(struct iwn_softc *); 151 static int iwn_read_prom_data(struct iwn_softc *, uint32_t, void *, int); 152 static void iwn_dma_map_addr(void *, bus_dma_segment_t *, int, int); 153 static int iwn_dma_contig_alloc(struct iwn_softc *, struct iwn_dma_info *, 154 void **, bus_size_t, bus_size_t); 155 static void iwn_dma_contig_free(struct iwn_dma_info *); 156 static int iwn_alloc_sched(struct iwn_softc *); 157 static void iwn_free_sched(struct iwn_softc *); 158 static int iwn_alloc_kw(struct iwn_softc *); 159 static void iwn_free_kw(struct iwn_softc *); 160 static int iwn_alloc_ict(struct iwn_softc *); 161 static void iwn_free_ict(struct iwn_softc *); 162 static int iwn_alloc_fwmem(struct iwn_softc *); 163 static void iwn_free_fwmem(struct iwn_softc *); 164 static int iwn_alloc_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 165 static void iwn_reset_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 166 static void iwn_free_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 167 static int iwn_alloc_tx_ring(struct iwn_softc *, struct iwn_tx_ring *, 168 int); 169 static void iwn_reset_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 170 static void iwn_free_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 171 static void iwn_check_tx_ring(struct iwn_softc *, int); 172 static void iwn5000_ict_reset(struct iwn_softc *); 173 static int iwn_read_eeprom(struct iwn_softc *, 174 uint8_t macaddr[IEEE80211_ADDR_LEN]); 175 static void iwn4965_read_eeprom(struct iwn_softc *); 176 #ifdef IWN_DEBUG 177 static void iwn4965_print_power_group(struct iwn_softc *, int); 178 #endif 179 static void iwn5000_read_eeprom(struct iwn_softc *); 180 static uint32_t iwn_eeprom_channel_flags(struct iwn_eeprom_chan *); 181 static void iwn_read_eeprom_band(struct iwn_softc *, int, int, int *, 182 struct ieee80211_channel[]); 183 static void iwn_read_eeprom_ht40(struct iwn_softc *, int, int, int *, 184 struct ieee80211_channel[]); 185 static void iwn_read_eeprom_channels(struct iwn_softc *, int, uint32_t); 186 static struct iwn_eeprom_chan *iwn_find_eeprom_channel(struct iwn_softc *, 187 struct ieee80211_channel *); 188 static void iwn_getradiocaps(struct ieee80211com *, int, int *, 189 struct ieee80211_channel[]); 190 static int iwn_setregdomain(struct ieee80211com *, 191 struct ieee80211_regdomain *, int, 192 struct ieee80211_channel[]); 193 static void iwn_read_eeprom_enhinfo(struct iwn_softc *); 194 static struct ieee80211_node *iwn_node_alloc(struct ieee80211vap *, 195 const uint8_t mac[IEEE80211_ADDR_LEN]); 196 static void iwn_newassoc(struct ieee80211_node *, int); 197 static int iwn_media_change(struct ifnet *); 198 static int iwn_newstate(struct ieee80211vap *, enum ieee80211_state, int); 199 static void iwn_calib_timeout(void *); 200 static void iwn_rx_phy(struct iwn_softc *, struct iwn_rx_desc *); 201 static void iwn_rx_done(struct iwn_softc *, struct iwn_rx_desc *, 202 struct iwn_rx_data *); 203 static void iwn_agg_tx_complete(struct iwn_softc *, struct iwn_tx_ring *, 204 int, int, int); 205 static void iwn_rx_compressed_ba(struct iwn_softc *, struct iwn_rx_desc *); 206 static void iwn5000_rx_calib_results(struct iwn_softc *, 207 struct iwn_rx_desc *); 208 static void iwn_rx_statistics(struct iwn_softc *, struct iwn_rx_desc *); 209 static void iwn4965_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 210 struct iwn_rx_data *); 211 static void iwn5000_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 212 struct iwn_rx_data *); 213 static void iwn_adj_ampdu_ptr(struct iwn_softc *, struct iwn_tx_ring *); 214 static void iwn_tx_done(struct iwn_softc *, struct iwn_rx_desc *, int, int, 215 uint8_t); 216 static int iwn_ampdu_check_bitmap(uint64_t, int, int); 217 static int iwn_ampdu_index_check(struct iwn_softc *, struct iwn_tx_ring *, 218 uint64_t, int, int); 219 static void iwn_ampdu_tx_done(struct iwn_softc *, int, int, int, void *); 220 static void iwn_cmd_done(struct iwn_softc *, struct iwn_rx_desc *); 221 static void iwn_notif_intr(struct iwn_softc *); 222 static void iwn_wakeup_intr(struct iwn_softc *); 223 static void iwn_rftoggle_task(void *, int); 224 static void iwn_fatal_intr(struct iwn_softc *); 225 static void iwn_intr(void *); 226 static void iwn4965_update_sched(struct iwn_softc *, int, int, uint8_t, 227 uint16_t); 228 static void iwn5000_update_sched(struct iwn_softc *, int, int, uint8_t, 229 uint16_t); 230 #ifdef notyet 231 static void iwn5000_reset_sched(struct iwn_softc *, int, int); 232 #endif 233 static int iwn_tx_data(struct iwn_softc *, struct mbuf *, 234 struct ieee80211_node *); 235 static int iwn_tx_data_raw(struct iwn_softc *, struct mbuf *, 236 struct ieee80211_node *, 237 const struct ieee80211_bpf_params *params); 238 static int iwn_tx_cmd(struct iwn_softc *, struct mbuf *, 239 struct ieee80211_node *, struct iwn_tx_ring *); 240 static void iwn_xmit_task(void *arg0, int pending); 241 static int iwn_raw_xmit(struct ieee80211_node *, struct mbuf *, 242 const struct ieee80211_bpf_params *); 243 static int iwn_transmit(struct ieee80211com *, struct mbuf *); 244 static void iwn_scan_timeout(void *); 245 static void iwn_watchdog(void *); 246 static int iwn_ioctl(struct ieee80211com *, u_long , void *); 247 static void iwn_parent(struct ieee80211com *); 248 static int iwn_cmd(struct iwn_softc *, int, const void *, int, int); 249 static int iwn4965_add_node(struct iwn_softc *, struct iwn_node_info *, 250 int); 251 static int iwn5000_add_node(struct iwn_softc *, struct iwn_node_info *, 252 int); 253 static int iwn_set_link_quality(struct iwn_softc *, 254 struct ieee80211_node *); 255 static int iwn_add_broadcast_node(struct iwn_softc *, int); 256 static int iwn_updateedca(struct ieee80211com *); 257 static void iwn_set_promisc(struct iwn_softc *); 258 static void iwn_update_promisc(struct ieee80211com *); 259 static void iwn_update_mcast(struct ieee80211com *); 260 static void iwn_set_led(struct iwn_softc *, uint8_t, uint8_t, uint8_t); 261 static int iwn_set_critical_temp(struct iwn_softc *); 262 static int iwn_set_timing(struct iwn_softc *, struct ieee80211_node *); 263 static void iwn4965_power_calibration(struct iwn_softc *, int); 264 static int iwn4965_set_txpower(struct iwn_softc *, int); 265 static int iwn5000_set_txpower(struct iwn_softc *, int); 266 static int iwn4965_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 267 static int iwn5000_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 268 static int iwn_get_noise(const struct iwn_rx_general_stats *); 269 static int iwn4965_get_temperature(struct iwn_softc *); 270 static int iwn5000_get_temperature(struct iwn_softc *); 271 static int iwn_init_sensitivity(struct iwn_softc *); 272 static void iwn_collect_noise(struct iwn_softc *, 273 const struct iwn_rx_general_stats *); 274 static int iwn4965_init_gains(struct iwn_softc *); 275 static int iwn5000_init_gains(struct iwn_softc *); 276 static int iwn4965_set_gains(struct iwn_softc *); 277 static int iwn5000_set_gains(struct iwn_softc *); 278 static void iwn_tune_sensitivity(struct iwn_softc *, 279 const struct iwn_rx_stats *); 280 static void iwn_save_stats_counters(struct iwn_softc *, 281 const struct iwn_stats *); 282 static int iwn_send_sensitivity(struct iwn_softc *); 283 static void iwn_check_rx_recovery(struct iwn_softc *, struct iwn_stats *); 284 static int iwn_set_pslevel(struct iwn_softc *, int, int, int); 285 static int iwn_send_btcoex(struct iwn_softc *); 286 static int iwn_send_advanced_btcoex(struct iwn_softc *); 287 static int iwn5000_runtime_calib(struct iwn_softc *); 288 static int iwn_check_bss_filter(struct iwn_softc *); 289 static int iwn4965_rxon_assoc(struct iwn_softc *, int); 290 static int iwn5000_rxon_assoc(struct iwn_softc *, int); 291 static int iwn_send_rxon(struct iwn_softc *, int, int); 292 static int iwn_config(struct iwn_softc *); 293 static int iwn_scan(struct iwn_softc *, struct ieee80211vap *, 294 struct ieee80211_scan_state *, struct ieee80211_channel *); 295 static int iwn_auth(struct iwn_softc *, struct ieee80211vap *vap); 296 static int iwn_run(struct iwn_softc *, struct ieee80211vap *vap); 297 static int iwn_ampdu_rx_start(struct ieee80211_node *, 298 struct ieee80211_rx_ampdu *, int, int, int); 299 static void iwn_ampdu_rx_stop(struct ieee80211_node *, 300 struct ieee80211_rx_ampdu *); 301 static int iwn_addba_request(struct ieee80211_node *, 302 struct ieee80211_tx_ampdu *, int, int, int); 303 static int iwn_addba_response(struct ieee80211_node *, 304 struct ieee80211_tx_ampdu *, int, int, int); 305 static int iwn_ampdu_tx_start(struct ieee80211com *, 306 struct ieee80211_node *, uint8_t); 307 static void iwn_ampdu_tx_stop(struct ieee80211_node *, 308 struct ieee80211_tx_ampdu *); 309 static void iwn4965_ampdu_tx_start(struct iwn_softc *, 310 struct ieee80211_node *, int, uint8_t, uint16_t); 311 static void iwn4965_ampdu_tx_stop(struct iwn_softc *, int, 312 uint8_t, uint16_t); 313 static void iwn5000_ampdu_tx_start(struct iwn_softc *, 314 struct ieee80211_node *, int, uint8_t, uint16_t); 315 static void iwn5000_ampdu_tx_stop(struct iwn_softc *, int, 316 uint8_t, uint16_t); 317 static int iwn5000_query_calibration(struct iwn_softc *); 318 static int iwn5000_send_calibration(struct iwn_softc *); 319 static int iwn5000_send_wimax_coex(struct iwn_softc *); 320 static int iwn5000_crystal_calib(struct iwn_softc *); 321 static int iwn5000_temp_offset_calib(struct iwn_softc *); 322 static int iwn5000_temp_offset_calibv2(struct iwn_softc *); 323 static int iwn4965_post_alive(struct iwn_softc *); 324 static int iwn5000_post_alive(struct iwn_softc *); 325 static int iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *, 326 int); 327 static int iwn4965_load_firmware(struct iwn_softc *); 328 static int iwn5000_load_firmware_section(struct iwn_softc *, uint32_t, 329 const uint8_t *, int); 330 static int iwn5000_load_firmware(struct iwn_softc *); 331 static int iwn_read_firmware_leg(struct iwn_softc *, 332 struct iwn_fw_info *); 333 static int iwn_read_firmware_tlv(struct iwn_softc *, 334 struct iwn_fw_info *, uint16_t); 335 static int iwn_read_firmware(struct iwn_softc *); 336 static void iwn_unload_firmware(struct iwn_softc *); 337 static int iwn_clock_wait(struct iwn_softc *); 338 static int iwn_apm_init(struct iwn_softc *); 339 static void iwn_apm_stop_master(struct iwn_softc *); 340 static void iwn_apm_stop(struct iwn_softc *); 341 static int iwn4965_nic_config(struct iwn_softc *); 342 static int iwn5000_nic_config(struct iwn_softc *); 343 static int iwn_hw_prepare(struct iwn_softc *); 344 static int iwn_hw_init(struct iwn_softc *); 345 static void iwn_hw_stop(struct iwn_softc *); 346 static void iwn_panicked(void *, int); 347 static int iwn_init_locked(struct iwn_softc *); 348 static int iwn_init(struct iwn_softc *); 349 static void iwn_stop_locked(struct iwn_softc *); 350 static void iwn_stop(struct iwn_softc *); 351 static void iwn_scan_start(struct ieee80211com *); 352 static void iwn_scan_end(struct ieee80211com *); 353 static void iwn_set_channel(struct ieee80211com *); 354 static void iwn_scan_curchan(struct ieee80211_scan_state *, unsigned long); 355 static void iwn_scan_mindwell(struct ieee80211_scan_state *); 356 #ifdef IWN_DEBUG 357 static char *iwn_get_csr_string(int); 358 static void iwn_debug_register(struct iwn_softc *); 359 #endif 360 361 static device_method_t iwn_methods[] = { 362 /* Device interface */ 363 DEVMETHOD(device_probe, iwn_probe), 364 DEVMETHOD(device_attach, iwn_attach), 365 DEVMETHOD(device_detach, iwn_detach), 366 DEVMETHOD(device_shutdown, iwn_shutdown), 367 DEVMETHOD(device_suspend, iwn_suspend), 368 DEVMETHOD(device_resume, iwn_resume), 369 370 DEVMETHOD_END 371 }; 372 373 static driver_t iwn_driver = { 374 "iwn", 375 iwn_methods, 376 sizeof(struct iwn_softc) 377 }; 378 static devclass_t iwn_devclass; 379 380 DRIVER_MODULE(iwn, pci, iwn_driver, iwn_devclass, NULL, NULL); 381 MODULE_PNP_INFO("U16:vendor;U16:device;D:#", pci, iwn, iwn_ident_table, 382 nitems(iwn_ident_table) - 1); 383 MODULE_VERSION(iwn, 1); 384 385 MODULE_DEPEND(iwn, firmware, 1, 1, 1); 386 MODULE_DEPEND(iwn, pci, 1, 1, 1); 387 MODULE_DEPEND(iwn, wlan, 1, 1, 1); 388 389 static d_ioctl_t iwn_cdev_ioctl; 390 static d_open_t iwn_cdev_open; 391 static d_close_t iwn_cdev_close; 392 393 static struct cdevsw iwn_cdevsw = { 394 .d_version = D_VERSION, 395 .d_flags = 0, 396 .d_open = iwn_cdev_open, 397 .d_close = iwn_cdev_close, 398 .d_ioctl = iwn_cdev_ioctl, 399 .d_name = "iwn", 400 }; 401 402 static int 403 iwn_probe(device_t dev) 404 { 405 const struct iwn_ident *ident; 406 407 for (ident = iwn_ident_table; ident->name != NULL; ident++) { 408 if (pci_get_vendor(dev) == ident->vendor && 409 pci_get_device(dev) == ident->device) { 410 device_set_desc(dev, ident->name); 411 return (BUS_PROBE_DEFAULT); 412 } 413 } 414 return ENXIO; 415 } 416 417 static int 418 iwn_is_3stream_device(struct iwn_softc *sc) 419 { 420 /* XXX for now only 5300, until the 5350 can be tested */ 421 if (sc->hw_type == IWN_HW_REV_TYPE_5300) 422 return (1); 423 return (0); 424 } 425 426 static int 427 iwn_attach(device_t dev) 428 { 429 struct iwn_softc *sc = device_get_softc(dev); 430 struct ieee80211com *ic; 431 int i, error, rid; 432 433 sc->sc_dev = dev; 434 435 #ifdef IWN_DEBUG 436 error = resource_int_value(device_get_name(sc->sc_dev), 437 device_get_unit(sc->sc_dev), "debug", &(sc->sc_debug)); 438 if (error != 0) 439 sc->sc_debug = 0; 440 #else 441 sc->sc_debug = 0; 442 #endif 443 444 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: begin\n",__func__); 445 446 /* 447 * Get the offset of the PCI Express Capability Structure in PCI 448 * Configuration Space. 449 */ 450 error = pci_find_cap(dev, PCIY_EXPRESS, &sc->sc_cap_off); 451 if (error != 0) { 452 device_printf(dev, "PCIe capability structure not found!\n"); 453 return error; 454 } 455 456 /* Clear device-specific "PCI retry timeout" register (41h). */ 457 pci_write_config(dev, 0x41, 0, 1); 458 459 /* Enable bus-mastering. */ 460 pci_enable_busmaster(dev); 461 462 rid = PCIR_BAR(0); 463 sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 464 RF_ACTIVE); 465 if (sc->mem == NULL) { 466 device_printf(dev, "can't map mem space\n"); 467 error = ENOMEM; 468 return error; 469 } 470 sc->sc_st = rman_get_bustag(sc->mem); 471 sc->sc_sh = rman_get_bushandle(sc->mem); 472 473 i = 1; 474 rid = 0; 475 if (pci_alloc_msi(dev, &i) == 0) 476 rid = 1; 477 /* Install interrupt handler. */ 478 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE | 479 (rid != 0 ? 0 : RF_SHAREABLE)); 480 if (sc->irq == NULL) { 481 device_printf(dev, "can't map interrupt\n"); 482 error = ENOMEM; 483 goto fail; 484 } 485 486 IWN_LOCK_INIT(sc); 487 488 /* Read hardware revision and attach. */ 489 sc->hw_type = (IWN_READ(sc, IWN_HW_REV) >> IWN_HW_REV_TYPE_SHIFT) 490 & IWN_HW_REV_TYPE_MASK; 491 sc->subdevice_id = pci_get_subdevice(dev); 492 493 /* 494 * 4965 versus 5000 and later have different methods. 495 * Let's set those up first. 496 */ 497 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 498 iwn4965_attach(sc, pci_get_device(dev)); 499 else 500 iwn5000_attach(sc, pci_get_device(dev)); 501 502 /* 503 * Next, let's setup the various parameters of each NIC. 504 */ 505 error = iwn_config_specific(sc, pci_get_device(dev)); 506 if (error != 0) { 507 device_printf(dev, "could not attach device, error %d\n", 508 error); 509 goto fail; 510 } 511 512 if ((error = iwn_hw_prepare(sc)) != 0) { 513 device_printf(dev, "hardware not ready, error %d\n", error); 514 goto fail; 515 } 516 517 /* Allocate DMA memory for firmware transfers. */ 518 if ((error = iwn_alloc_fwmem(sc)) != 0) { 519 device_printf(dev, 520 "could not allocate memory for firmware, error %d\n", 521 error); 522 goto fail; 523 } 524 525 /* Allocate "Keep Warm" page. */ 526 if ((error = iwn_alloc_kw(sc)) != 0) { 527 device_printf(dev, 528 "could not allocate keep warm page, error %d\n", error); 529 goto fail; 530 } 531 532 /* Allocate ICT table for 5000 Series. */ 533 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 534 (error = iwn_alloc_ict(sc)) != 0) { 535 device_printf(dev, "could not allocate ICT table, error %d\n", 536 error); 537 goto fail; 538 } 539 540 /* Allocate TX scheduler "rings". */ 541 if ((error = iwn_alloc_sched(sc)) != 0) { 542 device_printf(dev, 543 "could not allocate TX scheduler rings, error %d\n", error); 544 goto fail; 545 } 546 547 /* Allocate TX rings (16 on 4965AGN, 20 on >=5000). */ 548 for (i = 0; i < sc->ntxqs; i++) { 549 if ((error = iwn_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) { 550 device_printf(dev, 551 "could not allocate TX ring %d, error %d\n", i, 552 error); 553 goto fail; 554 } 555 } 556 557 /* Allocate RX ring. */ 558 if ((error = iwn_alloc_rx_ring(sc, &sc->rxq)) != 0) { 559 device_printf(dev, "could not allocate RX ring, error %d\n", 560 error); 561 goto fail; 562 } 563 564 /* Clear pending interrupts. */ 565 IWN_WRITE(sc, IWN_INT, 0xffffffff); 566 567 ic = &sc->sc_ic; 568 ic->ic_softc = sc; 569 ic->ic_name = device_get_nameunit(dev); 570 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 571 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 572 573 /* Set device capabilities. */ 574 ic->ic_caps = 575 IEEE80211_C_STA /* station mode supported */ 576 | IEEE80211_C_MONITOR /* monitor mode supported */ 577 #if 0 578 | IEEE80211_C_BGSCAN /* background scanning */ 579 #endif 580 | IEEE80211_C_TXPMGT /* tx power management */ 581 | IEEE80211_C_SHSLOT /* short slot time supported */ 582 | IEEE80211_C_WPA 583 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 584 #if 0 585 | IEEE80211_C_IBSS /* ibss/adhoc mode */ 586 #endif 587 | IEEE80211_C_WME /* WME */ 588 | IEEE80211_C_PMGT /* Station-side power mgmt */ 589 ; 590 591 /* Read MAC address, channels, etc from EEPROM. */ 592 if ((error = iwn_read_eeprom(sc, ic->ic_macaddr)) != 0) { 593 device_printf(dev, "could not read EEPROM, error %d\n", 594 error); 595 goto fail; 596 } 597 598 /* Count the number of available chains. */ 599 sc->ntxchains = 600 ((sc->txchainmask >> 2) & 1) + 601 ((sc->txchainmask >> 1) & 1) + 602 ((sc->txchainmask >> 0) & 1); 603 sc->nrxchains = 604 ((sc->rxchainmask >> 2) & 1) + 605 ((sc->rxchainmask >> 1) & 1) + 606 ((sc->rxchainmask >> 0) & 1); 607 if (bootverbose) { 608 device_printf(dev, "MIMO %dT%dR, %.4s, address %6D\n", 609 sc->ntxchains, sc->nrxchains, sc->eeprom_domain, 610 ic->ic_macaddr, ":"); 611 } 612 613 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 614 ic->ic_rxstream = sc->nrxchains; 615 ic->ic_txstream = sc->ntxchains; 616 617 /* 618 * Some of the 3 antenna devices (ie, the 4965) only supports 619 * 2x2 operation. So correct the number of streams if 620 * it's not a 3-stream device. 621 */ 622 if (! iwn_is_3stream_device(sc)) { 623 if (ic->ic_rxstream > 2) 624 ic->ic_rxstream = 2; 625 if (ic->ic_txstream > 2) 626 ic->ic_txstream = 2; 627 } 628 629 ic->ic_htcaps = 630 IEEE80211_HTCAP_SMPS_OFF /* SMPS mode disabled */ 631 | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */ 632 | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width*/ 633 | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */ 634 #ifdef notyet 635 | IEEE80211_HTCAP_GREENFIELD 636 #if IWN_RBUF_SIZE == 8192 637 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */ 638 #else 639 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */ 640 #endif 641 #endif 642 /* s/w capabilities */ 643 | IEEE80211_HTC_HT /* HT operation */ 644 | IEEE80211_HTC_AMPDU /* tx A-MPDU */ 645 #ifdef notyet 646 | IEEE80211_HTC_AMSDU /* tx A-MSDU */ 647 #endif 648 ; 649 } 650 651 ieee80211_ifattach(ic); 652 ic->ic_vap_create = iwn_vap_create; 653 ic->ic_ioctl = iwn_ioctl; 654 ic->ic_parent = iwn_parent; 655 ic->ic_vap_delete = iwn_vap_delete; 656 ic->ic_transmit = iwn_transmit; 657 ic->ic_raw_xmit = iwn_raw_xmit; 658 ic->ic_node_alloc = iwn_node_alloc; 659 sc->sc_ampdu_rx_start = ic->ic_ampdu_rx_start; 660 ic->ic_ampdu_rx_start = iwn_ampdu_rx_start; 661 sc->sc_ampdu_rx_stop = ic->ic_ampdu_rx_stop; 662 ic->ic_ampdu_rx_stop = iwn_ampdu_rx_stop; 663 sc->sc_addba_request = ic->ic_addba_request; 664 ic->ic_addba_request = iwn_addba_request; 665 sc->sc_addba_response = ic->ic_addba_response; 666 ic->ic_addba_response = iwn_addba_response; 667 sc->sc_addba_stop = ic->ic_addba_stop; 668 ic->ic_addba_stop = iwn_ampdu_tx_stop; 669 ic->ic_newassoc = iwn_newassoc; 670 ic->ic_wme.wme_update = iwn_updateedca; 671 ic->ic_update_promisc = iwn_update_promisc; 672 ic->ic_update_mcast = iwn_update_mcast; 673 ic->ic_scan_start = iwn_scan_start; 674 ic->ic_scan_end = iwn_scan_end; 675 ic->ic_set_channel = iwn_set_channel; 676 ic->ic_scan_curchan = iwn_scan_curchan; 677 ic->ic_scan_mindwell = iwn_scan_mindwell; 678 ic->ic_getradiocaps = iwn_getradiocaps; 679 ic->ic_setregdomain = iwn_setregdomain; 680 681 iwn_radiotap_attach(sc); 682 683 callout_init_mtx(&sc->calib_to, &sc->sc_mtx, 0); 684 callout_init_mtx(&sc->scan_timeout, &sc->sc_mtx, 0); 685 callout_init_mtx(&sc->watchdog_to, &sc->sc_mtx, 0); 686 TASK_INIT(&sc->sc_rftoggle_task, 0, iwn_rftoggle_task, sc); 687 TASK_INIT(&sc->sc_panic_task, 0, iwn_panicked, sc); 688 TASK_INIT(&sc->sc_xmit_task, 0, iwn_xmit_task, sc); 689 690 mbufq_init(&sc->sc_xmit_queue, 1024); 691 692 sc->sc_tq = taskqueue_create("iwn_taskq", M_WAITOK, 693 taskqueue_thread_enqueue, &sc->sc_tq); 694 error = taskqueue_start_threads(&sc->sc_tq, 1, 0, "iwn_taskq"); 695 if (error != 0) { 696 device_printf(dev, "can't start threads, error %d\n", error); 697 goto fail; 698 } 699 700 iwn_sysctlattach(sc); 701 702 /* 703 * Hook our interrupt after all initialization is complete. 704 */ 705 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, 706 NULL, iwn_intr, sc, &sc->sc_ih); 707 if (error != 0) { 708 device_printf(dev, "can't establish interrupt, error %d\n", 709 error); 710 goto fail; 711 } 712 713 #if 0 714 device_printf(sc->sc_dev, "%s: rx_stats=%d, rx_stats_bt=%d\n", 715 __func__, 716 sizeof(struct iwn_stats), 717 sizeof(struct iwn_stats_bt)); 718 #endif 719 720 if (bootverbose) 721 ieee80211_announce(ic); 722 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 723 724 /* Add debug ioctl right at the end */ 725 sc->sc_cdev = make_dev(&iwn_cdevsw, device_get_unit(dev), 726 UID_ROOT, GID_WHEEL, 0600, "%s", device_get_nameunit(dev)); 727 if (sc->sc_cdev == NULL) { 728 device_printf(dev, "failed to create debug character device\n"); 729 } else { 730 sc->sc_cdev->si_drv1 = sc; 731 } 732 return 0; 733 fail: 734 iwn_detach(dev); 735 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 736 return error; 737 } 738 739 /* 740 * Define specific configuration based on device id and subdevice id 741 * pid : PCI device id 742 */ 743 static int 744 iwn_config_specific(struct iwn_softc *sc, uint16_t pid) 745 { 746 747 switch (pid) { 748 /* 4965 series */ 749 case IWN_DID_4965_1: 750 case IWN_DID_4965_2: 751 case IWN_DID_4965_3: 752 case IWN_DID_4965_4: 753 sc->base_params = &iwn4965_base_params; 754 sc->limits = &iwn4965_sensitivity_limits; 755 sc->fwname = "iwn4965fw"; 756 /* Override chains masks, ROM is known to be broken. */ 757 sc->txchainmask = IWN_ANT_AB; 758 sc->rxchainmask = IWN_ANT_ABC; 759 /* Enable normal btcoex */ 760 sc->sc_flags |= IWN_FLAG_BTCOEX; 761 break; 762 /* 1000 Series */ 763 case IWN_DID_1000_1: 764 case IWN_DID_1000_2: 765 switch(sc->subdevice_id) { 766 case IWN_SDID_1000_1: 767 case IWN_SDID_1000_2: 768 case IWN_SDID_1000_3: 769 case IWN_SDID_1000_4: 770 case IWN_SDID_1000_5: 771 case IWN_SDID_1000_6: 772 case IWN_SDID_1000_7: 773 case IWN_SDID_1000_8: 774 case IWN_SDID_1000_9: 775 case IWN_SDID_1000_10: 776 case IWN_SDID_1000_11: 777 case IWN_SDID_1000_12: 778 sc->limits = &iwn1000_sensitivity_limits; 779 sc->base_params = &iwn1000_base_params; 780 sc->fwname = "iwn1000fw"; 781 break; 782 default: 783 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 784 "0x%04x rev %d not supported (subdevice)\n", pid, 785 sc->subdevice_id,sc->hw_type); 786 return ENOTSUP; 787 } 788 break; 789 /* 6x00 Series */ 790 case IWN_DID_6x00_2: 791 case IWN_DID_6x00_4: 792 case IWN_DID_6x00_1: 793 case IWN_DID_6x00_3: 794 sc->fwname = "iwn6000fw"; 795 sc->limits = &iwn6000_sensitivity_limits; 796 switch(sc->subdevice_id) { 797 case IWN_SDID_6x00_1: 798 case IWN_SDID_6x00_2: 799 case IWN_SDID_6x00_8: 800 //iwl6000_3agn_cfg 801 sc->base_params = &iwn_6000_base_params; 802 break; 803 case IWN_SDID_6x00_3: 804 case IWN_SDID_6x00_6: 805 case IWN_SDID_6x00_9: 806 ////iwl6000i_2agn 807 case IWN_SDID_6x00_4: 808 case IWN_SDID_6x00_7: 809 case IWN_SDID_6x00_10: 810 //iwl6000i_2abg_cfg 811 case IWN_SDID_6x00_5: 812 //iwl6000i_2bg_cfg 813 sc->base_params = &iwn_6000i_base_params; 814 sc->sc_flags |= IWN_FLAG_INTERNAL_PA; 815 sc->txchainmask = IWN_ANT_BC; 816 sc->rxchainmask = IWN_ANT_BC; 817 break; 818 default: 819 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 820 "0x%04x rev %d not supported (subdevice)\n", pid, 821 sc->subdevice_id,sc->hw_type); 822 return ENOTSUP; 823 } 824 break; 825 /* 6x05 Series */ 826 case IWN_DID_6x05_1: 827 case IWN_DID_6x05_2: 828 switch(sc->subdevice_id) { 829 case IWN_SDID_6x05_1: 830 case IWN_SDID_6x05_4: 831 case IWN_SDID_6x05_6: 832 //iwl6005_2agn_cfg 833 case IWN_SDID_6x05_2: 834 case IWN_SDID_6x05_5: 835 case IWN_SDID_6x05_7: 836 //iwl6005_2abg_cfg 837 case IWN_SDID_6x05_3: 838 //iwl6005_2bg_cfg 839 case IWN_SDID_6x05_8: 840 case IWN_SDID_6x05_9: 841 //iwl6005_2agn_sff_cfg 842 case IWN_SDID_6x05_10: 843 //iwl6005_2agn_d_cfg 844 case IWN_SDID_6x05_11: 845 //iwl6005_2agn_mow1_cfg 846 case IWN_SDID_6x05_12: 847 //iwl6005_2agn_mow2_cfg 848 sc->fwname = "iwn6000g2afw"; 849 sc->limits = &iwn6000_sensitivity_limits; 850 sc->base_params = &iwn_6000g2_base_params; 851 break; 852 default: 853 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 854 "0x%04x rev %d not supported (subdevice)\n", pid, 855 sc->subdevice_id,sc->hw_type); 856 return ENOTSUP; 857 } 858 break; 859 /* 6x35 Series */ 860 case IWN_DID_6035_1: 861 case IWN_DID_6035_2: 862 switch(sc->subdevice_id) { 863 case IWN_SDID_6035_1: 864 case IWN_SDID_6035_2: 865 case IWN_SDID_6035_3: 866 case IWN_SDID_6035_4: 867 case IWN_SDID_6035_5: 868 sc->fwname = "iwn6000g2bfw"; 869 sc->limits = &iwn6235_sensitivity_limits; 870 sc->base_params = &iwn_6235_base_params; 871 break; 872 default: 873 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 874 "0x%04x rev %d not supported (subdevice)\n", pid, 875 sc->subdevice_id,sc->hw_type); 876 return ENOTSUP; 877 } 878 break; 879 /* 6x50 WiFi/WiMax Series */ 880 case IWN_DID_6050_1: 881 case IWN_DID_6050_2: 882 switch(sc->subdevice_id) { 883 case IWN_SDID_6050_1: 884 case IWN_SDID_6050_3: 885 case IWN_SDID_6050_5: 886 //iwl6050_2agn_cfg 887 case IWN_SDID_6050_2: 888 case IWN_SDID_6050_4: 889 case IWN_SDID_6050_6: 890 //iwl6050_2abg_cfg 891 sc->fwname = "iwn6050fw"; 892 sc->txchainmask = IWN_ANT_AB; 893 sc->rxchainmask = IWN_ANT_AB; 894 sc->limits = &iwn6000_sensitivity_limits; 895 sc->base_params = &iwn_6050_base_params; 896 break; 897 default: 898 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 899 "0x%04x rev %d not supported (subdevice)\n", pid, 900 sc->subdevice_id,sc->hw_type); 901 return ENOTSUP; 902 } 903 break; 904 /* 6150 WiFi/WiMax Series */ 905 case IWN_DID_6150_1: 906 case IWN_DID_6150_2: 907 switch(sc->subdevice_id) { 908 case IWN_SDID_6150_1: 909 case IWN_SDID_6150_3: 910 case IWN_SDID_6150_5: 911 // iwl6150_bgn_cfg 912 case IWN_SDID_6150_2: 913 case IWN_SDID_6150_4: 914 case IWN_SDID_6150_6: 915 //iwl6150_bg_cfg 916 sc->fwname = "iwn6050fw"; 917 sc->limits = &iwn6000_sensitivity_limits; 918 sc->base_params = &iwn_6150_base_params; 919 break; 920 default: 921 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 922 "0x%04x rev %d not supported (subdevice)\n", pid, 923 sc->subdevice_id,sc->hw_type); 924 return ENOTSUP; 925 } 926 break; 927 /* 6030 Series and 1030 Series */ 928 case IWN_DID_x030_1: 929 case IWN_DID_x030_2: 930 case IWN_DID_x030_3: 931 case IWN_DID_x030_4: 932 switch(sc->subdevice_id) { 933 case IWN_SDID_x030_1: 934 case IWN_SDID_x030_3: 935 case IWN_SDID_x030_5: 936 // iwl1030_bgn_cfg 937 case IWN_SDID_x030_2: 938 case IWN_SDID_x030_4: 939 case IWN_SDID_x030_6: 940 //iwl1030_bg_cfg 941 case IWN_SDID_x030_7: 942 case IWN_SDID_x030_10: 943 case IWN_SDID_x030_14: 944 //iwl6030_2agn_cfg 945 case IWN_SDID_x030_8: 946 case IWN_SDID_x030_11: 947 case IWN_SDID_x030_15: 948 // iwl6030_2bgn_cfg 949 case IWN_SDID_x030_9: 950 case IWN_SDID_x030_12: 951 case IWN_SDID_x030_16: 952 // iwl6030_2abg_cfg 953 case IWN_SDID_x030_13: 954 //iwl6030_2bg_cfg 955 sc->fwname = "iwn6000g2bfw"; 956 sc->limits = &iwn6000_sensitivity_limits; 957 sc->base_params = &iwn_6000g2b_base_params; 958 break; 959 default: 960 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 961 "0x%04x rev %d not supported (subdevice)\n", pid, 962 sc->subdevice_id,sc->hw_type); 963 return ENOTSUP; 964 } 965 break; 966 /* 130 Series WiFi */ 967 /* XXX: This series will need adjustment for rate. 968 * see rx_with_siso_diversity in linux kernel 969 */ 970 case IWN_DID_130_1: 971 case IWN_DID_130_2: 972 switch(sc->subdevice_id) { 973 case IWN_SDID_130_1: 974 case IWN_SDID_130_3: 975 case IWN_SDID_130_5: 976 //iwl130_bgn_cfg 977 case IWN_SDID_130_2: 978 case IWN_SDID_130_4: 979 case IWN_SDID_130_6: 980 //iwl130_bg_cfg 981 sc->fwname = "iwn6000g2bfw"; 982 sc->limits = &iwn6000_sensitivity_limits; 983 sc->base_params = &iwn_6000g2b_base_params; 984 break; 985 default: 986 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 987 "0x%04x rev %d not supported (subdevice)\n", pid, 988 sc->subdevice_id,sc->hw_type); 989 return ENOTSUP; 990 } 991 break; 992 /* 100 Series WiFi */ 993 case IWN_DID_100_1: 994 case IWN_DID_100_2: 995 switch(sc->subdevice_id) { 996 case IWN_SDID_100_1: 997 case IWN_SDID_100_2: 998 case IWN_SDID_100_3: 999 case IWN_SDID_100_4: 1000 case IWN_SDID_100_5: 1001 case IWN_SDID_100_6: 1002 sc->limits = &iwn1000_sensitivity_limits; 1003 sc->base_params = &iwn1000_base_params; 1004 sc->fwname = "iwn100fw"; 1005 break; 1006 default: 1007 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1008 "0x%04x rev %d not supported (subdevice)\n", pid, 1009 sc->subdevice_id,sc->hw_type); 1010 return ENOTSUP; 1011 } 1012 break; 1013 1014 /* 105 Series */ 1015 /* XXX: This series will need adjustment for rate. 1016 * see rx_with_siso_diversity in linux kernel 1017 */ 1018 case IWN_DID_105_1: 1019 case IWN_DID_105_2: 1020 switch(sc->subdevice_id) { 1021 case IWN_SDID_105_1: 1022 case IWN_SDID_105_2: 1023 case IWN_SDID_105_3: 1024 //iwl105_bgn_cfg 1025 case IWN_SDID_105_4: 1026 //iwl105_bgn_d_cfg 1027 sc->limits = &iwn2030_sensitivity_limits; 1028 sc->base_params = &iwn2000_base_params; 1029 sc->fwname = "iwn105fw"; 1030 break; 1031 default: 1032 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1033 "0x%04x rev %d not supported (subdevice)\n", pid, 1034 sc->subdevice_id,sc->hw_type); 1035 return ENOTSUP; 1036 } 1037 break; 1038 1039 /* 135 Series */ 1040 /* XXX: This series will need adjustment for rate. 1041 * see rx_with_siso_diversity in linux kernel 1042 */ 1043 case IWN_DID_135_1: 1044 case IWN_DID_135_2: 1045 switch(sc->subdevice_id) { 1046 case IWN_SDID_135_1: 1047 case IWN_SDID_135_2: 1048 case IWN_SDID_135_3: 1049 sc->limits = &iwn2030_sensitivity_limits; 1050 sc->base_params = &iwn2030_base_params; 1051 sc->fwname = "iwn135fw"; 1052 break; 1053 default: 1054 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1055 "0x%04x rev %d not supported (subdevice)\n", pid, 1056 sc->subdevice_id,sc->hw_type); 1057 return ENOTSUP; 1058 } 1059 break; 1060 1061 /* 2x00 Series */ 1062 case IWN_DID_2x00_1: 1063 case IWN_DID_2x00_2: 1064 switch(sc->subdevice_id) { 1065 case IWN_SDID_2x00_1: 1066 case IWN_SDID_2x00_2: 1067 case IWN_SDID_2x00_3: 1068 //iwl2000_2bgn_cfg 1069 case IWN_SDID_2x00_4: 1070 //iwl2000_2bgn_d_cfg 1071 sc->limits = &iwn2030_sensitivity_limits; 1072 sc->base_params = &iwn2000_base_params; 1073 sc->fwname = "iwn2000fw"; 1074 break; 1075 default: 1076 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1077 "0x%04x rev %d not supported (subdevice) \n", 1078 pid, sc->subdevice_id, sc->hw_type); 1079 return ENOTSUP; 1080 } 1081 break; 1082 /* 2x30 Series */ 1083 case IWN_DID_2x30_1: 1084 case IWN_DID_2x30_2: 1085 switch(sc->subdevice_id) { 1086 case IWN_SDID_2x30_1: 1087 case IWN_SDID_2x30_3: 1088 case IWN_SDID_2x30_5: 1089 //iwl100_bgn_cfg 1090 case IWN_SDID_2x30_2: 1091 case IWN_SDID_2x30_4: 1092 case IWN_SDID_2x30_6: 1093 //iwl100_bg_cfg 1094 sc->limits = &iwn2030_sensitivity_limits; 1095 sc->base_params = &iwn2030_base_params; 1096 sc->fwname = "iwn2030fw"; 1097 break; 1098 default: 1099 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1100 "0x%04x rev %d not supported (subdevice)\n", pid, 1101 sc->subdevice_id,sc->hw_type); 1102 return ENOTSUP; 1103 } 1104 break; 1105 /* 5x00 Series */ 1106 case IWN_DID_5x00_1: 1107 case IWN_DID_5x00_2: 1108 case IWN_DID_5x00_3: 1109 case IWN_DID_5x00_4: 1110 sc->limits = &iwn5000_sensitivity_limits; 1111 sc->base_params = &iwn5000_base_params; 1112 sc->fwname = "iwn5000fw"; 1113 switch(sc->subdevice_id) { 1114 case IWN_SDID_5x00_1: 1115 case IWN_SDID_5x00_2: 1116 case IWN_SDID_5x00_3: 1117 case IWN_SDID_5x00_4: 1118 case IWN_SDID_5x00_9: 1119 case IWN_SDID_5x00_10: 1120 case IWN_SDID_5x00_11: 1121 case IWN_SDID_5x00_12: 1122 case IWN_SDID_5x00_17: 1123 case IWN_SDID_5x00_18: 1124 case IWN_SDID_5x00_19: 1125 case IWN_SDID_5x00_20: 1126 //iwl5100_agn_cfg 1127 sc->txchainmask = IWN_ANT_B; 1128 sc->rxchainmask = IWN_ANT_AB; 1129 break; 1130 case IWN_SDID_5x00_5: 1131 case IWN_SDID_5x00_6: 1132 case IWN_SDID_5x00_13: 1133 case IWN_SDID_5x00_14: 1134 case IWN_SDID_5x00_21: 1135 case IWN_SDID_5x00_22: 1136 //iwl5100_bgn_cfg 1137 sc->txchainmask = IWN_ANT_B; 1138 sc->rxchainmask = IWN_ANT_AB; 1139 break; 1140 case IWN_SDID_5x00_7: 1141 case IWN_SDID_5x00_8: 1142 case IWN_SDID_5x00_15: 1143 case IWN_SDID_5x00_16: 1144 case IWN_SDID_5x00_23: 1145 case IWN_SDID_5x00_24: 1146 //iwl5100_abg_cfg 1147 sc->txchainmask = IWN_ANT_B; 1148 sc->rxchainmask = IWN_ANT_AB; 1149 break; 1150 case IWN_SDID_5x00_25: 1151 case IWN_SDID_5x00_26: 1152 case IWN_SDID_5x00_27: 1153 case IWN_SDID_5x00_28: 1154 case IWN_SDID_5x00_29: 1155 case IWN_SDID_5x00_30: 1156 case IWN_SDID_5x00_31: 1157 case IWN_SDID_5x00_32: 1158 case IWN_SDID_5x00_33: 1159 case IWN_SDID_5x00_34: 1160 case IWN_SDID_5x00_35: 1161 case IWN_SDID_5x00_36: 1162 //iwl5300_agn_cfg 1163 sc->txchainmask = IWN_ANT_ABC; 1164 sc->rxchainmask = IWN_ANT_ABC; 1165 break; 1166 default: 1167 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1168 "0x%04x rev %d not supported (subdevice)\n", pid, 1169 sc->subdevice_id,sc->hw_type); 1170 return ENOTSUP; 1171 } 1172 break; 1173 /* 5x50 Series */ 1174 case IWN_DID_5x50_1: 1175 case IWN_DID_5x50_2: 1176 case IWN_DID_5x50_3: 1177 case IWN_DID_5x50_4: 1178 sc->limits = &iwn5000_sensitivity_limits; 1179 sc->base_params = &iwn5000_base_params; 1180 sc->fwname = "iwn5000fw"; 1181 switch(sc->subdevice_id) { 1182 case IWN_SDID_5x50_1: 1183 case IWN_SDID_5x50_2: 1184 case IWN_SDID_5x50_3: 1185 //iwl5350_agn_cfg 1186 sc->limits = &iwn5000_sensitivity_limits; 1187 sc->base_params = &iwn5000_base_params; 1188 sc->fwname = "iwn5000fw"; 1189 break; 1190 case IWN_SDID_5x50_4: 1191 case IWN_SDID_5x50_5: 1192 case IWN_SDID_5x50_8: 1193 case IWN_SDID_5x50_9: 1194 case IWN_SDID_5x50_10: 1195 case IWN_SDID_5x50_11: 1196 //iwl5150_agn_cfg 1197 case IWN_SDID_5x50_6: 1198 case IWN_SDID_5x50_7: 1199 case IWN_SDID_5x50_12: 1200 case IWN_SDID_5x50_13: 1201 //iwl5150_abg_cfg 1202 sc->limits = &iwn5000_sensitivity_limits; 1203 sc->fwname = "iwn5150fw"; 1204 sc->base_params = &iwn_5x50_base_params; 1205 break; 1206 default: 1207 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1208 "0x%04x rev %d not supported (subdevice)\n", pid, 1209 sc->subdevice_id,sc->hw_type); 1210 return ENOTSUP; 1211 } 1212 break; 1213 default: 1214 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id : 0x%04x" 1215 "rev 0x%08x not supported (device)\n", pid, sc->subdevice_id, 1216 sc->hw_type); 1217 return ENOTSUP; 1218 } 1219 return 0; 1220 } 1221 1222 static void 1223 iwn4965_attach(struct iwn_softc *sc, uint16_t pid) 1224 { 1225 struct iwn_ops *ops = &sc->ops; 1226 1227 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1228 1229 ops->load_firmware = iwn4965_load_firmware; 1230 ops->read_eeprom = iwn4965_read_eeprom; 1231 ops->post_alive = iwn4965_post_alive; 1232 ops->nic_config = iwn4965_nic_config; 1233 ops->update_sched = iwn4965_update_sched; 1234 ops->get_temperature = iwn4965_get_temperature; 1235 ops->get_rssi = iwn4965_get_rssi; 1236 ops->set_txpower = iwn4965_set_txpower; 1237 ops->init_gains = iwn4965_init_gains; 1238 ops->set_gains = iwn4965_set_gains; 1239 ops->rxon_assoc = iwn4965_rxon_assoc; 1240 ops->add_node = iwn4965_add_node; 1241 ops->tx_done = iwn4965_tx_done; 1242 ops->ampdu_tx_start = iwn4965_ampdu_tx_start; 1243 ops->ampdu_tx_stop = iwn4965_ampdu_tx_stop; 1244 sc->ntxqs = IWN4965_NTXQUEUES; 1245 sc->firstaggqueue = IWN4965_FIRSTAGGQUEUE; 1246 sc->ndmachnls = IWN4965_NDMACHNLS; 1247 sc->broadcast_id = IWN4965_ID_BROADCAST; 1248 sc->rxonsz = IWN4965_RXONSZ; 1249 sc->schedsz = IWN4965_SCHEDSZ; 1250 sc->fw_text_maxsz = IWN4965_FW_TEXT_MAXSZ; 1251 sc->fw_data_maxsz = IWN4965_FW_DATA_MAXSZ; 1252 sc->fwsz = IWN4965_FWSZ; 1253 sc->sched_txfact_addr = IWN4965_SCHED_TXFACT; 1254 sc->limits = &iwn4965_sensitivity_limits; 1255 sc->fwname = "iwn4965fw"; 1256 /* Override chains masks, ROM is known to be broken. */ 1257 sc->txchainmask = IWN_ANT_AB; 1258 sc->rxchainmask = IWN_ANT_ABC; 1259 /* Enable normal btcoex */ 1260 sc->sc_flags |= IWN_FLAG_BTCOEX; 1261 1262 DPRINTF(sc, IWN_DEBUG_TRACE, "%s: end\n",__func__); 1263 } 1264 1265 static void 1266 iwn5000_attach(struct iwn_softc *sc, uint16_t pid) 1267 { 1268 struct iwn_ops *ops = &sc->ops; 1269 1270 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1271 1272 ops->load_firmware = iwn5000_load_firmware; 1273 ops->read_eeprom = iwn5000_read_eeprom; 1274 ops->post_alive = iwn5000_post_alive; 1275 ops->nic_config = iwn5000_nic_config; 1276 ops->update_sched = iwn5000_update_sched; 1277 ops->get_temperature = iwn5000_get_temperature; 1278 ops->get_rssi = iwn5000_get_rssi; 1279 ops->set_txpower = iwn5000_set_txpower; 1280 ops->init_gains = iwn5000_init_gains; 1281 ops->set_gains = iwn5000_set_gains; 1282 ops->rxon_assoc = iwn5000_rxon_assoc; 1283 ops->add_node = iwn5000_add_node; 1284 ops->tx_done = iwn5000_tx_done; 1285 ops->ampdu_tx_start = iwn5000_ampdu_tx_start; 1286 ops->ampdu_tx_stop = iwn5000_ampdu_tx_stop; 1287 sc->ntxqs = IWN5000_NTXQUEUES; 1288 sc->firstaggqueue = IWN5000_FIRSTAGGQUEUE; 1289 sc->ndmachnls = IWN5000_NDMACHNLS; 1290 sc->broadcast_id = IWN5000_ID_BROADCAST; 1291 sc->rxonsz = IWN5000_RXONSZ; 1292 sc->schedsz = IWN5000_SCHEDSZ; 1293 sc->fw_text_maxsz = IWN5000_FW_TEXT_MAXSZ; 1294 sc->fw_data_maxsz = IWN5000_FW_DATA_MAXSZ; 1295 sc->fwsz = IWN5000_FWSZ; 1296 sc->sched_txfact_addr = IWN5000_SCHED_TXFACT; 1297 sc->reset_noise_gain = IWN5000_PHY_CALIB_RESET_NOISE_GAIN; 1298 sc->noise_gain = IWN5000_PHY_CALIB_NOISE_GAIN; 1299 1300 DPRINTF(sc, IWN_DEBUG_TRACE, "%s: end\n",__func__); 1301 } 1302 1303 /* 1304 * Attach the interface to 802.11 radiotap. 1305 */ 1306 static void 1307 iwn_radiotap_attach(struct iwn_softc *sc) 1308 { 1309 1310 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1311 ieee80211_radiotap_attach(&sc->sc_ic, 1312 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 1313 IWN_TX_RADIOTAP_PRESENT, 1314 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 1315 IWN_RX_RADIOTAP_PRESENT); 1316 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1317 } 1318 1319 static void 1320 iwn_sysctlattach(struct iwn_softc *sc) 1321 { 1322 #ifdef IWN_DEBUG 1323 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1324 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1325 1326 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1327 "debug", CTLFLAG_RW, &sc->sc_debug, sc->sc_debug, 1328 "control debugging printfs"); 1329 #endif 1330 } 1331 1332 static struct ieee80211vap * 1333 iwn_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 1334 enum ieee80211_opmode opmode, int flags, 1335 const uint8_t bssid[IEEE80211_ADDR_LEN], 1336 const uint8_t mac[IEEE80211_ADDR_LEN]) 1337 { 1338 struct iwn_softc *sc = ic->ic_softc; 1339 struct iwn_vap *ivp; 1340 struct ieee80211vap *vap; 1341 1342 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ 1343 return NULL; 1344 1345 ivp = malloc(sizeof(struct iwn_vap), M_80211_VAP, M_WAITOK | M_ZERO); 1346 vap = &ivp->iv_vap; 1347 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 1348 ivp->ctx = IWN_RXON_BSS_CTX; 1349 vap->iv_bmissthreshold = 10; /* override default */ 1350 /* Override with driver methods. */ 1351 ivp->iv_newstate = vap->iv_newstate; 1352 vap->iv_newstate = iwn_newstate; 1353 sc->ivap[IWN_RXON_BSS_CTX] = vap; 1354 1355 ieee80211_ratectl_init(vap); 1356 /* Complete setup. */ 1357 ieee80211_vap_attach(vap, iwn_media_change, ieee80211_media_status, 1358 mac); 1359 ic->ic_opmode = opmode; 1360 return vap; 1361 } 1362 1363 static void 1364 iwn_vap_delete(struct ieee80211vap *vap) 1365 { 1366 struct iwn_vap *ivp = IWN_VAP(vap); 1367 1368 ieee80211_ratectl_deinit(vap); 1369 ieee80211_vap_detach(vap); 1370 free(ivp, M_80211_VAP); 1371 } 1372 1373 static void 1374 iwn_xmit_queue_drain(struct iwn_softc *sc) 1375 { 1376 struct mbuf *m; 1377 struct ieee80211_node *ni; 1378 1379 IWN_LOCK_ASSERT(sc); 1380 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) { 1381 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 1382 ieee80211_free_node(ni); 1383 m_freem(m); 1384 } 1385 } 1386 1387 static int 1388 iwn_xmit_queue_enqueue(struct iwn_softc *sc, struct mbuf *m) 1389 { 1390 1391 IWN_LOCK_ASSERT(sc); 1392 return (mbufq_enqueue(&sc->sc_xmit_queue, m)); 1393 } 1394 1395 static int 1396 iwn_detach(device_t dev) 1397 { 1398 struct iwn_softc *sc = device_get_softc(dev); 1399 int qid; 1400 1401 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1402 1403 if (sc->sc_ic.ic_softc != NULL) { 1404 /* Free the mbuf queue and node references */ 1405 IWN_LOCK(sc); 1406 iwn_xmit_queue_drain(sc); 1407 IWN_UNLOCK(sc); 1408 1409 iwn_stop(sc); 1410 1411 taskqueue_drain_all(sc->sc_tq); 1412 taskqueue_free(sc->sc_tq); 1413 1414 callout_drain(&sc->watchdog_to); 1415 callout_drain(&sc->scan_timeout); 1416 callout_drain(&sc->calib_to); 1417 ieee80211_ifdetach(&sc->sc_ic); 1418 } 1419 1420 /* Uninstall interrupt handler. */ 1421 if (sc->irq != NULL) { 1422 bus_teardown_intr(dev, sc->irq, sc->sc_ih); 1423 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), 1424 sc->irq); 1425 pci_release_msi(dev); 1426 } 1427 1428 /* Free DMA resources. */ 1429 iwn_free_rx_ring(sc, &sc->rxq); 1430 for (qid = 0; qid < sc->ntxqs; qid++) 1431 iwn_free_tx_ring(sc, &sc->txq[qid]); 1432 iwn_free_sched(sc); 1433 iwn_free_kw(sc); 1434 if (sc->ict != NULL) 1435 iwn_free_ict(sc); 1436 iwn_free_fwmem(sc); 1437 1438 if (sc->mem != NULL) 1439 bus_release_resource(dev, SYS_RES_MEMORY, 1440 rman_get_rid(sc->mem), sc->mem); 1441 1442 if (sc->sc_cdev) { 1443 destroy_dev(sc->sc_cdev); 1444 sc->sc_cdev = NULL; 1445 } 1446 1447 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n", __func__); 1448 IWN_LOCK_DESTROY(sc); 1449 return 0; 1450 } 1451 1452 static int 1453 iwn_shutdown(device_t dev) 1454 { 1455 struct iwn_softc *sc = device_get_softc(dev); 1456 1457 iwn_stop(sc); 1458 return 0; 1459 } 1460 1461 static int 1462 iwn_suspend(device_t dev) 1463 { 1464 struct iwn_softc *sc = device_get_softc(dev); 1465 1466 ieee80211_suspend_all(&sc->sc_ic); 1467 return 0; 1468 } 1469 1470 static int 1471 iwn_resume(device_t dev) 1472 { 1473 struct iwn_softc *sc = device_get_softc(dev); 1474 1475 /* Clear device-specific "PCI retry timeout" register (41h). */ 1476 pci_write_config(dev, 0x41, 0, 1); 1477 1478 ieee80211_resume_all(&sc->sc_ic); 1479 return 0; 1480 } 1481 1482 static int 1483 iwn_nic_lock(struct iwn_softc *sc) 1484 { 1485 int ntries; 1486 1487 /* Request exclusive access to NIC. */ 1488 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1489 1490 /* Spin until we actually get the lock. */ 1491 for (ntries = 0; ntries < 1000; ntries++) { 1492 if ((IWN_READ(sc, IWN_GP_CNTRL) & 1493 (IWN_GP_CNTRL_MAC_ACCESS_ENA | IWN_GP_CNTRL_SLEEP)) == 1494 IWN_GP_CNTRL_MAC_ACCESS_ENA) 1495 return 0; 1496 DELAY(10); 1497 } 1498 return ETIMEDOUT; 1499 } 1500 1501 static __inline void 1502 iwn_nic_unlock(struct iwn_softc *sc) 1503 { 1504 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1505 } 1506 1507 static __inline uint32_t 1508 iwn_prph_read(struct iwn_softc *sc, uint32_t addr) 1509 { 1510 IWN_WRITE(sc, IWN_PRPH_RADDR, IWN_PRPH_DWORD | addr); 1511 IWN_BARRIER_READ_WRITE(sc); 1512 return IWN_READ(sc, IWN_PRPH_RDATA); 1513 } 1514 1515 static __inline void 1516 iwn_prph_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1517 { 1518 IWN_WRITE(sc, IWN_PRPH_WADDR, IWN_PRPH_DWORD | addr); 1519 IWN_BARRIER_WRITE(sc); 1520 IWN_WRITE(sc, IWN_PRPH_WDATA, data); 1521 } 1522 1523 static __inline void 1524 iwn_prph_setbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1525 { 1526 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) | mask); 1527 } 1528 1529 static __inline void 1530 iwn_prph_clrbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1531 { 1532 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) & ~mask); 1533 } 1534 1535 static __inline void 1536 iwn_prph_write_region_4(struct iwn_softc *sc, uint32_t addr, 1537 const uint32_t *data, int count) 1538 { 1539 for (; count > 0; count--, data++, addr += 4) 1540 iwn_prph_write(sc, addr, *data); 1541 } 1542 1543 static __inline uint32_t 1544 iwn_mem_read(struct iwn_softc *sc, uint32_t addr) 1545 { 1546 IWN_WRITE(sc, IWN_MEM_RADDR, addr); 1547 IWN_BARRIER_READ_WRITE(sc); 1548 return IWN_READ(sc, IWN_MEM_RDATA); 1549 } 1550 1551 static __inline void 1552 iwn_mem_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1553 { 1554 IWN_WRITE(sc, IWN_MEM_WADDR, addr); 1555 IWN_BARRIER_WRITE(sc); 1556 IWN_WRITE(sc, IWN_MEM_WDATA, data); 1557 } 1558 1559 static __inline void 1560 iwn_mem_write_2(struct iwn_softc *sc, uint32_t addr, uint16_t data) 1561 { 1562 uint32_t tmp; 1563 1564 tmp = iwn_mem_read(sc, addr & ~3); 1565 if (addr & 3) 1566 tmp = (tmp & 0x0000ffff) | data << 16; 1567 else 1568 tmp = (tmp & 0xffff0000) | data; 1569 iwn_mem_write(sc, addr & ~3, tmp); 1570 } 1571 1572 static __inline void 1573 iwn_mem_read_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t *data, 1574 int count) 1575 { 1576 for (; count > 0; count--, addr += 4) 1577 *data++ = iwn_mem_read(sc, addr); 1578 } 1579 1580 static __inline void 1581 iwn_mem_set_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t val, 1582 int count) 1583 { 1584 for (; count > 0; count--, addr += 4) 1585 iwn_mem_write(sc, addr, val); 1586 } 1587 1588 static int 1589 iwn_eeprom_lock(struct iwn_softc *sc) 1590 { 1591 int i, ntries; 1592 1593 for (i = 0; i < 100; i++) { 1594 /* Request exclusive access to EEPROM. */ 1595 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 1596 IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1597 1598 /* Spin until we actually get the lock. */ 1599 for (ntries = 0; ntries < 100; ntries++) { 1600 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 1601 IWN_HW_IF_CONFIG_EEPROM_LOCKED) 1602 return 0; 1603 DELAY(10); 1604 } 1605 } 1606 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end timeout\n", __func__); 1607 return ETIMEDOUT; 1608 } 1609 1610 static __inline void 1611 iwn_eeprom_unlock(struct iwn_softc *sc) 1612 { 1613 IWN_CLRBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1614 } 1615 1616 /* 1617 * Initialize access by host to One Time Programmable ROM. 1618 * NB: This kind of ROM can be found on 1000 or 6000 Series only. 1619 */ 1620 static int 1621 iwn_init_otprom(struct iwn_softc *sc) 1622 { 1623 uint16_t prev, base, next; 1624 int count, error; 1625 1626 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1627 1628 /* Wait for clock stabilization before accessing prph. */ 1629 if ((error = iwn_clock_wait(sc)) != 0) 1630 return error; 1631 1632 if ((error = iwn_nic_lock(sc)) != 0) 1633 return error; 1634 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1635 DELAY(5); 1636 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1637 iwn_nic_unlock(sc); 1638 1639 /* Set auto clock gate disable bit for HW with OTP shadow RAM. */ 1640 if (sc->base_params->shadow_ram_support) { 1641 IWN_SETBITS(sc, IWN_DBG_LINK_PWR_MGMT, 1642 IWN_RESET_LINK_PWR_MGMT_DIS); 1643 } 1644 IWN_CLRBITS(sc, IWN_EEPROM_GP, IWN_EEPROM_GP_IF_OWNER); 1645 /* Clear ECC status. */ 1646 IWN_SETBITS(sc, IWN_OTP_GP, 1647 IWN_OTP_GP_ECC_CORR_STTS | IWN_OTP_GP_ECC_UNCORR_STTS); 1648 1649 /* 1650 * Find the block before last block (contains the EEPROM image) 1651 * for HW without OTP shadow RAM. 1652 */ 1653 if (! sc->base_params->shadow_ram_support) { 1654 /* Switch to absolute addressing mode. */ 1655 IWN_CLRBITS(sc, IWN_OTP_GP, IWN_OTP_GP_RELATIVE_ACCESS); 1656 base = prev = 0; 1657 for (count = 0; count < sc->base_params->max_ll_items; 1658 count++) { 1659 error = iwn_read_prom_data(sc, base, &next, 2); 1660 if (error != 0) 1661 return error; 1662 if (next == 0) /* End of linked-list. */ 1663 break; 1664 prev = base; 1665 base = le16toh(next); 1666 } 1667 if (count == 0 || count == sc->base_params->max_ll_items) 1668 return EIO; 1669 /* Skip "next" word. */ 1670 sc->prom_base = prev + 1; 1671 } 1672 1673 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1674 1675 return 0; 1676 } 1677 1678 static int 1679 iwn_read_prom_data(struct iwn_softc *sc, uint32_t addr, void *data, int count) 1680 { 1681 uint8_t *out = data; 1682 uint32_t val, tmp; 1683 int ntries; 1684 1685 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1686 1687 addr += sc->prom_base; 1688 for (; count > 0; count -= 2, addr++) { 1689 IWN_WRITE(sc, IWN_EEPROM, addr << 2); 1690 for (ntries = 0; ntries < 10; ntries++) { 1691 val = IWN_READ(sc, IWN_EEPROM); 1692 if (val & IWN_EEPROM_READ_VALID) 1693 break; 1694 DELAY(5); 1695 } 1696 if (ntries == 10) { 1697 device_printf(sc->sc_dev, 1698 "timeout reading ROM at 0x%x\n", addr); 1699 return ETIMEDOUT; 1700 } 1701 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 1702 /* OTPROM, check for ECC errors. */ 1703 tmp = IWN_READ(sc, IWN_OTP_GP); 1704 if (tmp & IWN_OTP_GP_ECC_UNCORR_STTS) { 1705 device_printf(sc->sc_dev, 1706 "OTPROM ECC error at 0x%x\n", addr); 1707 return EIO; 1708 } 1709 if (tmp & IWN_OTP_GP_ECC_CORR_STTS) { 1710 /* Correctable ECC error, clear bit. */ 1711 IWN_SETBITS(sc, IWN_OTP_GP, 1712 IWN_OTP_GP_ECC_CORR_STTS); 1713 } 1714 } 1715 *out++ = val >> 16; 1716 if (count > 1) 1717 *out++ = val >> 24; 1718 } 1719 1720 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1721 1722 return 0; 1723 } 1724 1725 static void 1726 iwn_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1727 { 1728 if (error != 0) 1729 return; 1730 KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs)); 1731 *(bus_addr_t *)arg = segs[0].ds_addr; 1732 } 1733 1734 static int 1735 iwn_dma_contig_alloc(struct iwn_softc *sc, struct iwn_dma_info *dma, 1736 void **kvap, bus_size_t size, bus_size_t alignment) 1737 { 1738 int error; 1739 1740 dma->tag = NULL; 1741 dma->size = size; 1742 1743 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment, 1744 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1745 1, size, 0, NULL, NULL, &dma->tag); 1746 if (error != 0) 1747 goto fail; 1748 1749 error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr, 1750 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &dma->map); 1751 if (error != 0) 1752 goto fail; 1753 1754 error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size, 1755 iwn_dma_map_addr, &dma->paddr, BUS_DMA_NOWAIT); 1756 if (error != 0) 1757 goto fail; 1758 1759 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 1760 1761 if (kvap != NULL) 1762 *kvap = dma->vaddr; 1763 1764 return 0; 1765 1766 fail: iwn_dma_contig_free(dma); 1767 return error; 1768 } 1769 1770 static void 1771 iwn_dma_contig_free(struct iwn_dma_info *dma) 1772 { 1773 if (dma->vaddr != NULL) { 1774 bus_dmamap_sync(dma->tag, dma->map, 1775 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1776 bus_dmamap_unload(dma->tag, dma->map); 1777 bus_dmamem_free(dma->tag, dma->vaddr, dma->map); 1778 dma->vaddr = NULL; 1779 } 1780 if (dma->tag != NULL) { 1781 bus_dma_tag_destroy(dma->tag); 1782 dma->tag = NULL; 1783 } 1784 } 1785 1786 static int 1787 iwn_alloc_sched(struct iwn_softc *sc) 1788 { 1789 /* TX scheduler rings must be aligned on a 1KB boundary. */ 1790 return iwn_dma_contig_alloc(sc, &sc->sched_dma, (void **)&sc->sched, 1791 sc->schedsz, 1024); 1792 } 1793 1794 static void 1795 iwn_free_sched(struct iwn_softc *sc) 1796 { 1797 iwn_dma_contig_free(&sc->sched_dma); 1798 } 1799 1800 static int 1801 iwn_alloc_kw(struct iwn_softc *sc) 1802 { 1803 /* "Keep Warm" page must be aligned on a 4KB boundary. */ 1804 return iwn_dma_contig_alloc(sc, &sc->kw_dma, NULL, 4096, 4096); 1805 } 1806 1807 static void 1808 iwn_free_kw(struct iwn_softc *sc) 1809 { 1810 iwn_dma_contig_free(&sc->kw_dma); 1811 } 1812 1813 static int 1814 iwn_alloc_ict(struct iwn_softc *sc) 1815 { 1816 /* ICT table must be aligned on a 4KB boundary. */ 1817 return iwn_dma_contig_alloc(sc, &sc->ict_dma, (void **)&sc->ict, 1818 IWN_ICT_SIZE, 4096); 1819 } 1820 1821 static void 1822 iwn_free_ict(struct iwn_softc *sc) 1823 { 1824 iwn_dma_contig_free(&sc->ict_dma); 1825 } 1826 1827 static int 1828 iwn_alloc_fwmem(struct iwn_softc *sc) 1829 { 1830 /* Must be aligned on a 16-byte boundary. */ 1831 return iwn_dma_contig_alloc(sc, &sc->fw_dma, NULL, sc->fwsz, 16); 1832 } 1833 1834 static void 1835 iwn_free_fwmem(struct iwn_softc *sc) 1836 { 1837 iwn_dma_contig_free(&sc->fw_dma); 1838 } 1839 1840 static int 1841 iwn_alloc_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1842 { 1843 bus_size_t size; 1844 int i, error; 1845 1846 ring->cur = 0; 1847 1848 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1849 1850 /* Allocate RX descriptors (256-byte aligned). */ 1851 size = IWN_RX_RING_COUNT * sizeof (uint32_t); 1852 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 1853 size, 256); 1854 if (error != 0) { 1855 device_printf(sc->sc_dev, 1856 "%s: could not allocate RX ring DMA memory, error %d\n", 1857 __func__, error); 1858 goto fail; 1859 } 1860 1861 /* Allocate RX status area (16-byte aligned). */ 1862 error = iwn_dma_contig_alloc(sc, &ring->stat_dma, (void **)&ring->stat, 1863 sizeof (struct iwn_rx_status), 16); 1864 if (error != 0) { 1865 device_printf(sc->sc_dev, 1866 "%s: could not allocate RX status DMA memory, error %d\n", 1867 __func__, error); 1868 goto fail; 1869 } 1870 1871 /* Create RX buffer DMA tag. */ 1872 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 1873 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1874 IWN_RBUF_SIZE, 1, IWN_RBUF_SIZE, 0, NULL, NULL, &ring->data_dmat); 1875 if (error != 0) { 1876 device_printf(sc->sc_dev, 1877 "%s: could not create RX buf DMA tag, error %d\n", 1878 __func__, error); 1879 goto fail; 1880 } 1881 1882 /* 1883 * Allocate and map RX buffers. 1884 */ 1885 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1886 struct iwn_rx_data *data = &ring->data[i]; 1887 bus_addr_t paddr; 1888 1889 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 1890 if (error != 0) { 1891 device_printf(sc->sc_dev, 1892 "%s: could not create RX buf DMA map, error %d\n", 1893 __func__, error); 1894 goto fail; 1895 } 1896 1897 data->m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, 1898 IWN_RBUF_SIZE); 1899 if (data->m == NULL) { 1900 device_printf(sc->sc_dev, 1901 "%s: could not allocate RX mbuf\n", __func__); 1902 error = ENOBUFS; 1903 goto fail; 1904 } 1905 1906 error = bus_dmamap_load(ring->data_dmat, data->map, 1907 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 1908 &paddr, BUS_DMA_NOWAIT); 1909 if (error != 0 && error != EFBIG) { 1910 device_printf(sc->sc_dev, 1911 "%s: can't map mbuf, error %d\n", __func__, 1912 error); 1913 goto fail; 1914 } 1915 1916 bus_dmamap_sync(ring->data_dmat, data->map, 1917 BUS_DMASYNC_PREREAD); 1918 1919 /* Set physical address of RX buffer (256-byte aligned). */ 1920 ring->desc[i] = htole32(paddr >> 8); 1921 } 1922 1923 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 1924 BUS_DMASYNC_PREWRITE); 1925 1926 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 1927 1928 return 0; 1929 1930 fail: iwn_free_rx_ring(sc, ring); 1931 1932 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 1933 1934 return error; 1935 } 1936 1937 static void 1938 iwn_reset_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1939 { 1940 int ntries; 1941 1942 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 1943 1944 if (iwn_nic_lock(sc) == 0) { 1945 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 1946 for (ntries = 0; ntries < 1000; ntries++) { 1947 if (IWN_READ(sc, IWN_FH_RX_STATUS) & 1948 IWN_FH_RX_STATUS_IDLE) 1949 break; 1950 DELAY(10); 1951 } 1952 iwn_nic_unlock(sc); 1953 } 1954 ring->cur = 0; 1955 sc->last_rx_valid = 0; 1956 } 1957 1958 static void 1959 iwn_free_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1960 { 1961 int i; 1962 1963 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 1964 1965 iwn_dma_contig_free(&ring->desc_dma); 1966 iwn_dma_contig_free(&ring->stat_dma); 1967 1968 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1969 struct iwn_rx_data *data = &ring->data[i]; 1970 1971 if (data->m != NULL) { 1972 bus_dmamap_sync(ring->data_dmat, data->map, 1973 BUS_DMASYNC_POSTREAD); 1974 bus_dmamap_unload(ring->data_dmat, data->map); 1975 m_freem(data->m); 1976 data->m = NULL; 1977 } 1978 if (data->map != NULL) 1979 bus_dmamap_destroy(ring->data_dmat, data->map); 1980 } 1981 if (ring->data_dmat != NULL) { 1982 bus_dma_tag_destroy(ring->data_dmat); 1983 ring->data_dmat = NULL; 1984 } 1985 } 1986 1987 static int 1988 iwn_alloc_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring, int qid) 1989 { 1990 bus_addr_t paddr; 1991 bus_size_t size; 1992 int i, error; 1993 1994 ring->qid = qid; 1995 ring->queued = 0; 1996 ring->cur = 0; 1997 1998 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1999 2000 /* Allocate TX descriptors (256-byte aligned). */ 2001 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_desc); 2002 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 2003 size, 256); 2004 if (error != 0) { 2005 device_printf(sc->sc_dev, 2006 "%s: could not allocate TX ring DMA memory, error %d\n", 2007 __func__, error); 2008 goto fail; 2009 } 2010 2011 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_cmd); 2012 error = iwn_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd, 2013 size, 4); 2014 if (error != 0) { 2015 device_printf(sc->sc_dev, 2016 "%s: could not allocate TX cmd DMA memory, error %d\n", 2017 __func__, error); 2018 goto fail; 2019 } 2020 2021 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 2022 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 2023 IWN_MAX_SCATTER - 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); 2024 if (error != 0) { 2025 device_printf(sc->sc_dev, 2026 "%s: could not create TX buf DMA tag, error %d\n", 2027 __func__, error); 2028 goto fail; 2029 } 2030 2031 paddr = ring->cmd_dma.paddr; 2032 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2033 struct iwn_tx_data *data = &ring->data[i]; 2034 2035 data->cmd_paddr = paddr; 2036 data->scratch_paddr = paddr + 12; 2037 paddr += sizeof (struct iwn_tx_cmd); 2038 2039 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 2040 if (error != 0) { 2041 device_printf(sc->sc_dev, 2042 "%s: could not create TX buf DMA map, error %d\n", 2043 __func__, error); 2044 goto fail; 2045 } 2046 } 2047 2048 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2049 2050 return 0; 2051 2052 fail: iwn_free_tx_ring(sc, ring); 2053 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2054 return error; 2055 } 2056 2057 static void 2058 iwn_reset_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2059 { 2060 int i; 2061 2062 DPRINTF(sc, IWN_DEBUG_TRACE, "->doing %s \n", __func__); 2063 2064 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2065 struct iwn_tx_data *data = &ring->data[i]; 2066 2067 if (data->m != NULL) { 2068 bus_dmamap_sync(ring->data_dmat, data->map, 2069 BUS_DMASYNC_POSTWRITE); 2070 bus_dmamap_unload(ring->data_dmat, data->map); 2071 m_freem(data->m); 2072 data->m = NULL; 2073 } 2074 if (data->ni != NULL) { 2075 ieee80211_free_node(data->ni); 2076 data->ni = NULL; 2077 } 2078 data->remapped = 0; 2079 data->long_retries = 0; 2080 } 2081 /* Clear TX descriptors. */ 2082 memset(ring->desc, 0, ring->desc_dma.size); 2083 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 2084 BUS_DMASYNC_PREWRITE); 2085 sc->qfullmsk &= ~(1 << ring->qid); 2086 ring->queued = 0; 2087 ring->cur = 0; 2088 } 2089 2090 static void 2091 iwn_free_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2092 { 2093 int i; 2094 2095 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 2096 2097 iwn_dma_contig_free(&ring->desc_dma); 2098 iwn_dma_contig_free(&ring->cmd_dma); 2099 2100 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2101 struct iwn_tx_data *data = &ring->data[i]; 2102 2103 if (data->m != NULL) { 2104 bus_dmamap_sync(ring->data_dmat, data->map, 2105 BUS_DMASYNC_POSTWRITE); 2106 bus_dmamap_unload(ring->data_dmat, data->map); 2107 m_freem(data->m); 2108 } 2109 if (data->map != NULL) 2110 bus_dmamap_destroy(ring->data_dmat, data->map); 2111 } 2112 if (ring->data_dmat != NULL) { 2113 bus_dma_tag_destroy(ring->data_dmat); 2114 ring->data_dmat = NULL; 2115 } 2116 } 2117 2118 static void 2119 iwn_check_tx_ring(struct iwn_softc *sc, int qid) 2120 { 2121 struct iwn_tx_ring *ring = &sc->txq[qid]; 2122 2123 KASSERT(ring->queued >= 0, ("%s: ring->queued (%d) for queue %d < 0!", 2124 __func__, ring->queued, qid)); 2125 2126 if (qid >= sc->firstaggqueue) { 2127 struct iwn_ops *ops = &sc->ops; 2128 struct ieee80211_tx_ampdu *tap = sc->qid2tap[qid]; 2129 2130 if (ring->queued == 0 && !IEEE80211_AMPDU_RUNNING(tap)) { 2131 uint16_t ssn = tap->txa_start & 0xfff; 2132 uint8_t tid = tap->txa_tid; 2133 int *res = tap->txa_private; 2134 2135 iwn_nic_lock(sc); 2136 ops->ampdu_tx_stop(sc, qid, tid, ssn); 2137 iwn_nic_unlock(sc); 2138 2139 sc->qid2tap[qid] = NULL; 2140 free(res, M_DEVBUF); 2141 } 2142 } 2143 2144 if (ring->queued < IWN_TX_RING_LOMARK) { 2145 sc->qfullmsk &= ~(1 << qid); 2146 2147 if (ring->queued == 0) 2148 sc->sc_tx_timer = 0; 2149 else 2150 sc->sc_tx_timer = 5; 2151 } 2152 } 2153 2154 static void 2155 iwn5000_ict_reset(struct iwn_softc *sc) 2156 { 2157 /* Disable interrupts. */ 2158 IWN_WRITE(sc, IWN_INT_MASK, 0); 2159 2160 /* Reset ICT table. */ 2161 memset(sc->ict, 0, IWN_ICT_SIZE); 2162 sc->ict_cur = 0; 2163 2164 bus_dmamap_sync(sc->ict_dma.tag, sc->ict_dma.map, 2165 BUS_DMASYNC_PREWRITE); 2166 2167 /* Set physical address of ICT table (4KB aligned). */ 2168 DPRINTF(sc, IWN_DEBUG_RESET, "%s: enabling ICT\n", __func__); 2169 IWN_WRITE(sc, IWN_DRAM_INT_TBL, IWN_DRAM_INT_TBL_ENABLE | 2170 IWN_DRAM_INT_TBL_WRAP_CHECK | sc->ict_dma.paddr >> 12); 2171 2172 /* Enable periodic RX interrupt. */ 2173 sc->int_mask |= IWN_INT_RX_PERIODIC; 2174 /* Switch to ICT interrupt mode in driver. */ 2175 sc->sc_flags |= IWN_FLAG_USE_ICT; 2176 2177 /* Re-enable interrupts. */ 2178 IWN_WRITE(sc, IWN_INT, 0xffffffff); 2179 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 2180 } 2181 2182 static int 2183 iwn_read_eeprom(struct iwn_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2184 { 2185 struct iwn_ops *ops = &sc->ops; 2186 uint16_t val; 2187 int error; 2188 2189 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2190 2191 /* Check whether adapter has an EEPROM or an OTPROM. */ 2192 if (sc->hw_type >= IWN_HW_REV_TYPE_1000 && 2193 (IWN_READ(sc, IWN_OTP_GP) & IWN_OTP_GP_DEV_SEL_OTP)) 2194 sc->sc_flags |= IWN_FLAG_HAS_OTPROM; 2195 DPRINTF(sc, IWN_DEBUG_RESET, "%s found\n", 2196 (sc->sc_flags & IWN_FLAG_HAS_OTPROM) ? "OTPROM" : "EEPROM"); 2197 2198 /* Adapter has to be powered on for EEPROM access to work. */ 2199 if ((error = iwn_apm_init(sc)) != 0) { 2200 device_printf(sc->sc_dev, 2201 "%s: could not power ON adapter, error %d\n", __func__, 2202 error); 2203 return error; 2204 } 2205 2206 if ((IWN_READ(sc, IWN_EEPROM_GP) & 0x7) == 0) { 2207 device_printf(sc->sc_dev, "%s: bad ROM signature\n", __func__); 2208 return EIO; 2209 } 2210 if ((error = iwn_eeprom_lock(sc)) != 0) { 2211 device_printf(sc->sc_dev, "%s: could not lock ROM, error %d\n", 2212 __func__, error); 2213 return error; 2214 } 2215 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 2216 if ((error = iwn_init_otprom(sc)) != 0) { 2217 device_printf(sc->sc_dev, 2218 "%s: could not initialize OTPROM, error %d\n", 2219 __func__, error); 2220 return error; 2221 } 2222 } 2223 2224 iwn_read_prom_data(sc, IWN_EEPROM_SKU_CAP, &val, 2); 2225 DPRINTF(sc, IWN_DEBUG_RESET, "SKU capabilities=0x%04x\n", le16toh(val)); 2226 /* Check if HT support is bonded out. */ 2227 if (val & htole16(IWN_EEPROM_SKU_CAP_11N)) 2228 sc->sc_flags |= IWN_FLAG_HAS_11N; 2229 2230 iwn_read_prom_data(sc, IWN_EEPROM_RFCFG, &val, 2); 2231 sc->rfcfg = le16toh(val); 2232 DPRINTF(sc, IWN_DEBUG_RESET, "radio config=0x%04x\n", sc->rfcfg); 2233 /* Read Tx/Rx chains from ROM unless it's known to be broken. */ 2234 if (sc->txchainmask == 0) 2235 sc->txchainmask = IWN_RFCFG_TXANTMSK(sc->rfcfg); 2236 if (sc->rxchainmask == 0) 2237 sc->rxchainmask = IWN_RFCFG_RXANTMSK(sc->rfcfg); 2238 2239 /* Read MAC address. */ 2240 iwn_read_prom_data(sc, IWN_EEPROM_MAC, macaddr, 6); 2241 2242 /* Read adapter-specific information from EEPROM. */ 2243 ops->read_eeprom(sc); 2244 2245 iwn_apm_stop(sc); /* Power OFF adapter. */ 2246 2247 iwn_eeprom_unlock(sc); 2248 2249 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2250 2251 return 0; 2252 } 2253 2254 static void 2255 iwn4965_read_eeprom(struct iwn_softc *sc) 2256 { 2257 uint32_t addr; 2258 uint16_t val; 2259 int i; 2260 2261 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2262 2263 /* Read regulatory domain (4 ASCII characters). */ 2264 iwn_read_prom_data(sc, IWN4965_EEPROM_DOMAIN, sc->eeprom_domain, 4); 2265 2266 /* Read the list of authorized channels (20MHz & 40MHz). */ 2267 for (i = 0; i < IWN_NBANDS - 1; i++) { 2268 addr = iwn4965_regulatory_bands[i]; 2269 iwn_read_eeprom_channels(sc, i, addr); 2270 } 2271 2272 /* Read maximum allowed TX power for 2GHz and 5GHz bands. */ 2273 iwn_read_prom_data(sc, IWN4965_EEPROM_MAXPOW, &val, 2); 2274 sc->maxpwr2GHz = val & 0xff; 2275 sc->maxpwr5GHz = val >> 8; 2276 /* Check that EEPROM values are within valid range. */ 2277 if (sc->maxpwr5GHz < 20 || sc->maxpwr5GHz > 50) 2278 sc->maxpwr5GHz = 38; 2279 if (sc->maxpwr2GHz < 20 || sc->maxpwr2GHz > 50) 2280 sc->maxpwr2GHz = 38; 2281 DPRINTF(sc, IWN_DEBUG_RESET, "maxpwr 2GHz=%d 5GHz=%d\n", 2282 sc->maxpwr2GHz, sc->maxpwr5GHz); 2283 2284 /* Read samples for each TX power group. */ 2285 iwn_read_prom_data(sc, IWN4965_EEPROM_BANDS, sc->bands, 2286 sizeof sc->bands); 2287 2288 /* Read voltage at which samples were taken. */ 2289 iwn_read_prom_data(sc, IWN4965_EEPROM_VOLTAGE, &val, 2); 2290 sc->eeprom_voltage = (int16_t)le16toh(val); 2291 DPRINTF(sc, IWN_DEBUG_RESET, "voltage=%d (in 0.3V)\n", 2292 sc->eeprom_voltage); 2293 2294 #ifdef IWN_DEBUG 2295 /* Print samples. */ 2296 if (sc->sc_debug & IWN_DEBUG_ANY) { 2297 for (i = 0; i < IWN_NBANDS - 1; i++) 2298 iwn4965_print_power_group(sc, i); 2299 } 2300 #endif 2301 2302 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2303 } 2304 2305 #ifdef IWN_DEBUG 2306 static void 2307 iwn4965_print_power_group(struct iwn_softc *sc, int i) 2308 { 2309 struct iwn4965_eeprom_band *band = &sc->bands[i]; 2310 struct iwn4965_eeprom_chan_samples *chans = band->chans; 2311 int j, c; 2312 2313 printf("===band %d===\n", i); 2314 printf("chan lo=%d, chan hi=%d\n", band->lo, band->hi); 2315 printf("chan1 num=%d\n", chans[0].num); 2316 for (c = 0; c < 2; c++) { 2317 for (j = 0; j < IWN_NSAMPLES; j++) { 2318 printf("chain %d, sample %d: temp=%d gain=%d " 2319 "power=%d pa_det=%d\n", c, j, 2320 chans[0].samples[c][j].temp, 2321 chans[0].samples[c][j].gain, 2322 chans[0].samples[c][j].power, 2323 chans[0].samples[c][j].pa_det); 2324 } 2325 } 2326 printf("chan2 num=%d\n", chans[1].num); 2327 for (c = 0; c < 2; c++) { 2328 for (j = 0; j < IWN_NSAMPLES; j++) { 2329 printf("chain %d, sample %d: temp=%d gain=%d " 2330 "power=%d pa_det=%d\n", c, j, 2331 chans[1].samples[c][j].temp, 2332 chans[1].samples[c][j].gain, 2333 chans[1].samples[c][j].power, 2334 chans[1].samples[c][j].pa_det); 2335 } 2336 } 2337 } 2338 #endif 2339 2340 static void 2341 iwn5000_read_eeprom(struct iwn_softc *sc) 2342 { 2343 struct iwn5000_eeprom_calib_hdr hdr; 2344 int32_t volt; 2345 uint32_t base, addr; 2346 uint16_t val; 2347 int i; 2348 2349 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2350 2351 /* Read regulatory domain (4 ASCII characters). */ 2352 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2353 base = le16toh(val); 2354 iwn_read_prom_data(sc, base + IWN5000_EEPROM_DOMAIN, 2355 sc->eeprom_domain, 4); 2356 2357 /* Read the list of authorized channels (20MHz & 40MHz). */ 2358 for (i = 0; i < IWN_NBANDS - 1; i++) { 2359 addr = base + sc->base_params->regulatory_bands[i]; 2360 iwn_read_eeprom_channels(sc, i, addr); 2361 } 2362 2363 /* Read enhanced TX power information for 6000 Series. */ 2364 if (sc->base_params->enhanced_TX_power) 2365 iwn_read_eeprom_enhinfo(sc); 2366 2367 iwn_read_prom_data(sc, IWN5000_EEPROM_CAL, &val, 2); 2368 base = le16toh(val); 2369 iwn_read_prom_data(sc, base, &hdr, sizeof hdr); 2370 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 2371 "%s: calib version=%u pa type=%u voltage=%u\n", __func__, 2372 hdr.version, hdr.pa_type, le16toh(hdr.volt)); 2373 sc->calib_ver = hdr.version; 2374 2375 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 2376 sc->eeprom_voltage = le16toh(hdr.volt); 2377 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2378 sc->eeprom_temp_high=le16toh(val); 2379 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2380 sc->eeprom_temp = le16toh(val); 2381 } 2382 2383 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 2384 /* Compute temperature offset. */ 2385 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2386 sc->eeprom_temp = le16toh(val); 2387 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2388 volt = le16toh(val); 2389 sc->temp_off = sc->eeprom_temp - (volt / -5); 2390 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "temp=%d volt=%d offset=%dK\n", 2391 sc->eeprom_temp, volt, sc->temp_off); 2392 } else { 2393 /* Read crystal calibration. */ 2394 iwn_read_prom_data(sc, base + IWN5000_EEPROM_CRYSTAL, 2395 &sc->eeprom_crystal, sizeof (uint32_t)); 2396 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "crystal calibration 0x%08x\n", 2397 le32toh(sc->eeprom_crystal)); 2398 } 2399 2400 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2401 2402 } 2403 2404 /* 2405 * Translate EEPROM flags to net80211. 2406 */ 2407 static uint32_t 2408 iwn_eeprom_channel_flags(struct iwn_eeprom_chan *channel) 2409 { 2410 uint32_t nflags; 2411 2412 nflags = 0; 2413 if ((channel->flags & IWN_EEPROM_CHAN_ACTIVE) == 0) 2414 nflags |= IEEE80211_CHAN_PASSIVE; 2415 if ((channel->flags & IWN_EEPROM_CHAN_IBSS) == 0) 2416 nflags |= IEEE80211_CHAN_NOADHOC; 2417 if (channel->flags & IWN_EEPROM_CHAN_RADAR) { 2418 nflags |= IEEE80211_CHAN_DFS; 2419 /* XXX apparently IBSS may still be marked */ 2420 nflags |= IEEE80211_CHAN_NOADHOC; 2421 } 2422 2423 return nflags; 2424 } 2425 2426 static void 2427 iwn_read_eeprom_band(struct iwn_softc *sc, int n, int maxchans, int *nchans, 2428 struct ieee80211_channel chans[]) 2429 { 2430 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2431 const struct iwn_chan_band *band = &iwn_bands[n]; 2432 uint8_t bands[IEEE80211_MODE_BYTES]; 2433 uint8_t chan; 2434 int i, error, nflags; 2435 2436 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2437 2438 memset(bands, 0, sizeof(bands)); 2439 if (n == 0) { 2440 setbit(bands, IEEE80211_MODE_11B); 2441 setbit(bands, IEEE80211_MODE_11G); 2442 if (sc->sc_flags & IWN_FLAG_HAS_11N) 2443 setbit(bands, IEEE80211_MODE_11NG); 2444 } else { 2445 setbit(bands, IEEE80211_MODE_11A); 2446 if (sc->sc_flags & IWN_FLAG_HAS_11N) 2447 setbit(bands, IEEE80211_MODE_11NA); 2448 } 2449 2450 for (i = 0; i < band->nchan; i++) { 2451 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2452 DPRINTF(sc, IWN_DEBUG_RESET, 2453 "skip chan %d flags 0x%x maxpwr %d\n", 2454 band->chan[i], channels[i].flags, 2455 channels[i].maxpwr); 2456 continue; 2457 } 2458 2459 chan = band->chan[i]; 2460 nflags = iwn_eeprom_channel_flags(&channels[i]); 2461 error = ieee80211_add_channel(chans, maxchans, nchans, 2462 chan, 0, channels[i].maxpwr, nflags, bands); 2463 if (error != 0) 2464 break; 2465 2466 /* Save maximum allowed TX power for this channel. */ 2467 /* XXX wrong */ 2468 sc->maxpwr[chan] = channels[i].maxpwr; 2469 2470 DPRINTF(sc, IWN_DEBUG_RESET, 2471 "add chan %d flags 0x%x maxpwr %d\n", chan, 2472 channels[i].flags, channels[i].maxpwr); 2473 } 2474 2475 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2476 2477 } 2478 2479 static void 2480 iwn_read_eeprom_ht40(struct iwn_softc *sc, int n, int maxchans, int *nchans, 2481 struct ieee80211_channel chans[]) 2482 { 2483 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2484 const struct iwn_chan_band *band = &iwn_bands[n]; 2485 uint8_t chan; 2486 int i, error, nflags; 2487 2488 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s start\n", __func__); 2489 2490 if (!(sc->sc_flags & IWN_FLAG_HAS_11N)) { 2491 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end no 11n\n", __func__); 2492 return; 2493 } 2494 2495 for (i = 0; i < band->nchan; i++) { 2496 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2497 DPRINTF(sc, IWN_DEBUG_RESET, 2498 "skip chan %d flags 0x%x maxpwr %d\n", 2499 band->chan[i], channels[i].flags, 2500 channels[i].maxpwr); 2501 continue; 2502 } 2503 2504 chan = band->chan[i]; 2505 nflags = iwn_eeprom_channel_flags(&channels[i]); 2506 nflags |= (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A); 2507 error = ieee80211_add_channel_ht40(chans, maxchans, nchans, 2508 chan, channels[i].maxpwr, nflags); 2509 switch (error) { 2510 case EINVAL: 2511 device_printf(sc->sc_dev, 2512 "%s: no entry for channel %d\n", __func__, chan); 2513 continue; 2514 case ENOENT: 2515 DPRINTF(sc, IWN_DEBUG_RESET, 2516 "%s: skip chan %d, extension channel not found\n", 2517 __func__, chan); 2518 continue; 2519 case ENOBUFS: 2520 device_printf(sc->sc_dev, 2521 "%s: channel table is full!\n", __func__); 2522 break; 2523 case 0: 2524 DPRINTF(sc, IWN_DEBUG_RESET, 2525 "add ht40 chan %d flags 0x%x maxpwr %d\n", 2526 chan, channels[i].flags, channels[i].maxpwr); 2527 /* FALLTHROUGH */ 2528 default: 2529 break; 2530 } 2531 } 2532 2533 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2534 2535 } 2536 2537 static void 2538 iwn_read_eeprom_channels(struct iwn_softc *sc, int n, uint32_t addr) 2539 { 2540 struct ieee80211com *ic = &sc->sc_ic; 2541 2542 iwn_read_prom_data(sc, addr, &sc->eeprom_channels[n], 2543 iwn_bands[n].nchan * sizeof (struct iwn_eeprom_chan)); 2544 2545 if (n < 5) { 2546 iwn_read_eeprom_band(sc, n, IEEE80211_CHAN_MAX, &ic->ic_nchans, 2547 ic->ic_channels); 2548 } else { 2549 iwn_read_eeprom_ht40(sc, n, IEEE80211_CHAN_MAX, &ic->ic_nchans, 2550 ic->ic_channels); 2551 } 2552 ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans); 2553 } 2554 2555 static struct iwn_eeprom_chan * 2556 iwn_find_eeprom_channel(struct iwn_softc *sc, struct ieee80211_channel *c) 2557 { 2558 int band, chan, i, j; 2559 2560 if (IEEE80211_IS_CHAN_HT40(c)) { 2561 band = IEEE80211_IS_CHAN_5GHZ(c) ? 6 : 5; 2562 if (IEEE80211_IS_CHAN_HT40D(c)) 2563 chan = c->ic_extieee; 2564 else 2565 chan = c->ic_ieee; 2566 for (i = 0; i < iwn_bands[band].nchan; i++) { 2567 if (iwn_bands[band].chan[i] == chan) 2568 return &sc->eeprom_channels[band][i]; 2569 } 2570 } else { 2571 for (j = 0; j < 5; j++) { 2572 for (i = 0; i < iwn_bands[j].nchan; i++) { 2573 if (iwn_bands[j].chan[i] == c->ic_ieee && 2574 ((j == 0) ^ IEEE80211_IS_CHAN_A(c)) == 1) 2575 return &sc->eeprom_channels[j][i]; 2576 } 2577 } 2578 } 2579 return NULL; 2580 } 2581 2582 static void 2583 iwn_getradiocaps(struct ieee80211com *ic, 2584 int maxchans, int *nchans, struct ieee80211_channel chans[]) 2585 { 2586 struct iwn_softc *sc = ic->ic_softc; 2587 int i; 2588 2589 /* Parse the list of authorized channels. */ 2590 for (i = 0; i < 5 && *nchans < maxchans; i++) 2591 iwn_read_eeprom_band(sc, i, maxchans, nchans, chans); 2592 for (i = 5; i < IWN_NBANDS - 1 && *nchans < maxchans; i++) 2593 iwn_read_eeprom_ht40(sc, i, maxchans, nchans, chans); 2594 } 2595 2596 /* 2597 * Enforce flags read from EEPROM. 2598 */ 2599 static int 2600 iwn_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, 2601 int nchan, struct ieee80211_channel chans[]) 2602 { 2603 struct iwn_softc *sc = ic->ic_softc; 2604 int i; 2605 2606 for (i = 0; i < nchan; i++) { 2607 struct ieee80211_channel *c = &chans[i]; 2608 struct iwn_eeprom_chan *channel; 2609 2610 channel = iwn_find_eeprom_channel(sc, c); 2611 if (channel == NULL) { 2612 ic_printf(ic, "%s: invalid channel %u freq %u/0x%x\n", 2613 __func__, c->ic_ieee, c->ic_freq, c->ic_flags); 2614 return EINVAL; 2615 } 2616 c->ic_flags |= iwn_eeprom_channel_flags(channel); 2617 } 2618 2619 return 0; 2620 } 2621 2622 static void 2623 iwn_read_eeprom_enhinfo(struct iwn_softc *sc) 2624 { 2625 struct iwn_eeprom_enhinfo enhinfo[35]; 2626 struct ieee80211com *ic = &sc->sc_ic; 2627 struct ieee80211_channel *c; 2628 uint16_t val, base; 2629 int8_t maxpwr; 2630 uint8_t flags; 2631 int i, j; 2632 2633 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2634 2635 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2636 base = le16toh(val); 2637 iwn_read_prom_data(sc, base + IWN6000_EEPROM_ENHINFO, 2638 enhinfo, sizeof enhinfo); 2639 2640 for (i = 0; i < nitems(enhinfo); i++) { 2641 flags = enhinfo[i].flags; 2642 if (!(flags & IWN_ENHINFO_VALID)) 2643 continue; /* Skip invalid entries. */ 2644 2645 maxpwr = 0; 2646 if (sc->txchainmask & IWN_ANT_A) 2647 maxpwr = MAX(maxpwr, enhinfo[i].chain[0]); 2648 if (sc->txchainmask & IWN_ANT_B) 2649 maxpwr = MAX(maxpwr, enhinfo[i].chain[1]); 2650 if (sc->txchainmask & IWN_ANT_C) 2651 maxpwr = MAX(maxpwr, enhinfo[i].chain[2]); 2652 if (sc->ntxchains == 2) 2653 maxpwr = MAX(maxpwr, enhinfo[i].mimo2); 2654 else if (sc->ntxchains == 3) 2655 maxpwr = MAX(maxpwr, enhinfo[i].mimo3); 2656 2657 for (j = 0; j < ic->ic_nchans; j++) { 2658 c = &ic->ic_channels[j]; 2659 if ((flags & IWN_ENHINFO_5GHZ)) { 2660 if (!IEEE80211_IS_CHAN_A(c)) 2661 continue; 2662 } else if ((flags & IWN_ENHINFO_OFDM)) { 2663 if (!IEEE80211_IS_CHAN_G(c)) 2664 continue; 2665 } else if (!IEEE80211_IS_CHAN_B(c)) 2666 continue; 2667 if ((flags & IWN_ENHINFO_HT40)) { 2668 if (!IEEE80211_IS_CHAN_HT40(c)) 2669 continue; 2670 } else { 2671 if (IEEE80211_IS_CHAN_HT40(c)) 2672 continue; 2673 } 2674 if (enhinfo[i].chan != 0 && 2675 enhinfo[i].chan != c->ic_ieee) 2676 continue; 2677 2678 DPRINTF(sc, IWN_DEBUG_RESET, 2679 "channel %d(%x), maxpwr %d\n", c->ic_ieee, 2680 c->ic_flags, maxpwr / 2); 2681 c->ic_maxregpower = maxpwr / 2; 2682 c->ic_maxpower = maxpwr; 2683 } 2684 } 2685 2686 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2687 2688 } 2689 2690 static struct ieee80211_node * 2691 iwn_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 2692 { 2693 struct iwn_node *wn; 2694 2695 wn = malloc(sizeof (struct iwn_node), M_80211_NODE, M_NOWAIT | M_ZERO); 2696 if (wn == NULL) 2697 return (NULL); 2698 2699 wn->id = IWN_ID_UNDEFINED; 2700 2701 return (&wn->ni); 2702 } 2703 2704 static __inline int 2705 rate2plcp(int rate) 2706 { 2707 switch (rate & 0xff) { 2708 case 12: return 0xd; 2709 case 18: return 0xf; 2710 case 24: return 0x5; 2711 case 36: return 0x7; 2712 case 48: return 0x9; 2713 case 72: return 0xb; 2714 case 96: return 0x1; 2715 case 108: return 0x3; 2716 case 2: return 10; 2717 case 4: return 20; 2718 case 11: return 55; 2719 case 22: return 110; 2720 } 2721 return 0; 2722 } 2723 2724 static __inline uint8_t 2725 plcp2rate(const uint8_t rate_plcp) 2726 { 2727 switch (rate_plcp) { 2728 case 0xd: return 12; 2729 case 0xf: return 18; 2730 case 0x5: return 24; 2731 case 0x7: return 36; 2732 case 0x9: return 48; 2733 case 0xb: return 72; 2734 case 0x1: return 96; 2735 case 0x3: return 108; 2736 case 10: return 2; 2737 case 20: return 4; 2738 case 55: return 11; 2739 case 110: return 22; 2740 default: return 0; 2741 } 2742 } 2743 2744 static int 2745 iwn_get_1stream_tx_antmask(struct iwn_softc *sc) 2746 { 2747 2748 return IWN_LSB(sc->txchainmask); 2749 } 2750 2751 static int 2752 iwn_get_2stream_tx_antmask(struct iwn_softc *sc) 2753 { 2754 int tx; 2755 2756 /* 2757 * The '2 stream' setup is a bit .. odd. 2758 * 2759 * For NICs that support only 1 antenna, default to IWN_ANT_AB or 2760 * the firmware panics (eg Intel 5100.) 2761 * 2762 * For NICs that support two antennas, we use ANT_AB. 2763 * 2764 * For NICs that support three antennas, we use the two that 2765 * wasn't the default one. 2766 * 2767 * XXX TODO: if bluetooth (full concurrent) is enabled, restrict 2768 * this to only one antenna. 2769 */ 2770 2771 /* Default - transmit on the other antennas */ 2772 tx = (sc->txchainmask & ~IWN_LSB(sc->txchainmask)); 2773 2774 /* Now, if it's zero, set it to IWN_ANT_AB, so to not panic firmware */ 2775 if (tx == 0) 2776 tx = IWN_ANT_AB; 2777 2778 /* 2779 * If the NIC is a two-stream TX NIC, configure the TX mask to 2780 * the default chainmask 2781 */ 2782 else if (sc->ntxchains == 2) 2783 tx = sc->txchainmask; 2784 2785 return (tx); 2786 } 2787 2788 2789 2790 /* 2791 * Calculate the required PLCP value from the given rate, 2792 * to the given node. 2793 * 2794 * This will take the node configuration (eg 11n, rate table 2795 * setup, etc) into consideration. 2796 */ 2797 static uint32_t 2798 iwn_rate_to_plcp(struct iwn_softc *sc, struct ieee80211_node *ni, 2799 uint8_t rate) 2800 { 2801 struct ieee80211com *ic = ni->ni_ic; 2802 uint32_t plcp = 0; 2803 int ridx; 2804 2805 /* 2806 * If it's an MCS rate, let's set the plcp correctly 2807 * and set the relevant flags based on the node config. 2808 */ 2809 if (rate & IEEE80211_RATE_MCS) { 2810 /* 2811 * Set the initial PLCP value to be between 0->31 for 2812 * MCS 0 -> MCS 31, then set the "I'm an MCS rate!" 2813 * flag. 2814 */ 2815 plcp = IEEE80211_RV(rate) | IWN_RFLAG_MCS; 2816 2817 /* 2818 * XXX the following should only occur if both 2819 * the local configuration _and_ the remote node 2820 * advertise these capabilities. Thus this code 2821 * may need fixing! 2822 */ 2823 2824 /* 2825 * Set the channel width and guard interval. 2826 */ 2827 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { 2828 plcp |= IWN_RFLAG_HT40; 2829 if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) 2830 plcp |= IWN_RFLAG_SGI; 2831 } else if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) { 2832 plcp |= IWN_RFLAG_SGI; 2833 } 2834 2835 /* 2836 * Ensure the selected rate matches the link quality 2837 * table entries being used. 2838 */ 2839 if (rate > 0x8f) 2840 plcp |= IWN_RFLAG_ANT(sc->txchainmask); 2841 else if (rate > 0x87) 2842 plcp |= IWN_RFLAG_ANT(iwn_get_2stream_tx_antmask(sc)); 2843 else 2844 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2845 } else { 2846 /* 2847 * Set the initial PLCP - fine for both 2848 * OFDM and CCK rates. 2849 */ 2850 plcp = rate2plcp(rate); 2851 2852 /* Set CCK flag if it's CCK */ 2853 2854 /* XXX It would be nice to have a method 2855 * to map the ridx -> phy table entry 2856 * so we could just query that, rather than 2857 * this hack to check against IWN_RIDX_OFDM6. 2858 */ 2859 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt, 2860 rate & IEEE80211_RATE_VAL); 2861 if (ridx < IWN_RIDX_OFDM6 && 2862 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 2863 plcp |= IWN_RFLAG_CCK; 2864 2865 /* Set antenna configuration */ 2866 /* XXX TODO: is this the right antenna to use for legacy? */ 2867 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2868 } 2869 2870 DPRINTF(sc, IWN_DEBUG_TXRATE, "%s: rate=0x%02x, plcp=0x%08x\n", 2871 __func__, 2872 rate, 2873 plcp); 2874 2875 return (htole32(plcp)); 2876 } 2877 2878 static void 2879 iwn_newassoc(struct ieee80211_node *ni, int isnew) 2880 { 2881 /* Doesn't do anything at the moment */ 2882 } 2883 2884 static int 2885 iwn_media_change(struct ifnet *ifp) 2886 { 2887 int error; 2888 2889 error = ieee80211_media_change(ifp); 2890 /* NB: only the fixed rate can change and that doesn't need a reset */ 2891 return (error == ENETRESET ? 0 : error); 2892 } 2893 2894 static int 2895 iwn_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 2896 { 2897 struct iwn_vap *ivp = IWN_VAP(vap); 2898 struct ieee80211com *ic = vap->iv_ic; 2899 struct iwn_softc *sc = ic->ic_softc; 2900 int error = 0; 2901 2902 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2903 2904 DPRINTF(sc, IWN_DEBUG_STATE, "%s: %s -> %s\n", __func__, 2905 ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); 2906 2907 IEEE80211_UNLOCK(ic); 2908 IWN_LOCK(sc); 2909 callout_stop(&sc->calib_to); 2910 2911 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 2912 2913 switch (nstate) { 2914 case IEEE80211_S_ASSOC: 2915 if (vap->iv_state != IEEE80211_S_RUN) 2916 break; 2917 /* FALLTHROUGH */ 2918 case IEEE80211_S_AUTH: 2919 if (vap->iv_state == IEEE80211_S_AUTH) 2920 break; 2921 2922 /* 2923 * !AUTH -> AUTH transition requires state reset to handle 2924 * reassociations correctly. 2925 */ 2926 sc->rxon->associd = 0; 2927 sc->rxon->filter &= ~htole32(IWN_FILTER_BSS); 2928 sc->calib.state = IWN_CALIB_STATE_INIT; 2929 2930 /* Wait until we hear a beacon before we transmit */ 2931 if (IEEE80211_IS_CHAN_PASSIVE(ic->ic_curchan)) 2932 sc->sc_beacon_wait = 1; 2933 2934 if ((error = iwn_auth(sc, vap)) != 0) { 2935 device_printf(sc->sc_dev, 2936 "%s: could not move to auth state\n", __func__); 2937 } 2938 break; 2939 2940 case IEEE80211_S_RUN: 2941 /* 2942 * RUN -> RUN transition; Just restart the timers. 2943 */ 2944 if (vap->iv_state == IEEE80211_S_RUN) { 2945 sc->calib_cnt = 0; 2946 break; 2947 } 2948 2949 /* Wait until we hear a beacon before we transmit */ 2950 if (IEEE80211_IS_CHAN_PASSIVE(ic->ic_curchan)) 2951 sc->sc_beacon_wait = 1; 2952 2953 /* 2954 * !RUN -> RUN requires setting the association id 2955 * which is done with a firmware cmd. We also defer 2956 * starting the timers until that work is done. 2957 */ 2958 if ((error = iwn_run(sc, vap)) != 0) { 2959 device_printf(sc->sc_dev, 2960 "%s: could not move to run state\n", __func__); 2961 } 2962 break; 2963 2964 case IEEE80211_S_INIT: 2965 sc->calib.state = IWN_CALIB_STATE_INIT; 2966 /* 2967 * Purge the xmit queue so we don't have old frames 2968 * during a new association attempt. 2969 */ 2970 sc->sc_beacon_wait = 0; 2971 iwn_xmit_queue_drain(sc); 2972 break; 2973 2974 default: 2975 break; 2976 } 2977 IWN_UNLOCK(sc); 2978 IEEE80211_LOCK(ic); 2979 if (error != 0){ 2980 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2981 return error; 2982 } 2983 2984 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 2985 2986 return ivp->iv_newstate(vap, nstate, arg); 2987 } 2988 2989 static void 2990 iwn_calib_timeout(void *arg) 2991 { 2992 struct iwn_softc *sc = arg; 2993 2994 IWN_LOCK_ASSERT(sc); 2995 2996 /* Force automatic TX power calibration every 60 secs. */ 2997 if (++sc->calib_cnt >= 120) { 2998 uint32_t flags = 0; 2999 3000 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s\n", 3001 "sending request for statistics"); 3002 (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, 3003 sizeof flags, 1); 3004 sc->calib_cnt = 0; 3005 } 3006 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 3007 sc); 3008 } 3009 3010 /* 3011 * Process an RX_PHY firmware notification. This is usually immediately 3012 * followed by an MPDU_RX_DONE notification. 3013 */ 3014 static void 3015 iwn_rx_phy(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3016 { 3017 struct iwn_rx_stat *stat = (struct iwn_rx_stat *)(desc + 1); 3018 3019 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: received PHY stats\n", __func__); 3020 3021 /* Save RX statistics, they will be used on MPDU_RX_DONE. */ 3022 memcpy(&sc->last_rx_stat, stat, sizeof (*stat)); 3023 sc->last_rx_valid = 1; 3024 } 3025 3026 /* 3027 * Process an RX_DONE (4965AGN only) or MPDU_RX_DONE firmware notification. 3028 * Each MPDU_RX_DONE notification must be preceded by an RX_PHY one. 3029 */ 3030 static void 3031 iwn_rx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3032 struct iwn_rx_data *data) 3033 { 3034 struct iwn_ops *ops = &sc->ops; 3035 struct ieee80211com *ic = &sc->sc_ic; 3036 struct iwn_rx_ring *ring = &sc->rxq; 3037 struct ieee80211_frame_min *wh; 3038 struct ieee80211_node *ni; 3039 struct mbuf *m, *m1; 3040 struct iwn_rx_stat *stat; 3041 caddr_t head; 3042 bus_addr_t paddr; 3043 uint32_t flags; 3044 int error, len, rssi, nf; 3045 3046 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3047 3048 if (desc->type == IWN_MPDU_RX_DONE) { 3049 /* Check for prior RX_PHY notification. */ 3050 if (!sc->last_rx_valid) { 3051 DPRINTF(sc, IWN_DEBUG_ANY, 3052 "%s: missing RX_PHY\n", __func__); 3053 return; 3054 } 3055 stat = &sc->last_rx_stat; 3056 } else 3057 stat = (struct iwn_rx_stat *)(desc + 1); 3058 3059 if (stat->cfg_phy_len > IWN_STAT_MAXLEN) { 3060 device_printf(sc->sc_dev, 3061 "%s: invalid RX statistic header, len %d\n", __func__, 3062 stat->cfg_phy_len); 3063 return; 3064 } 3065 if (desc->type == IWN_MPDU_RX_DONE) { 3066 struct iwn_rx_mpdu *mpdu = (struct iwn_rx_mpdu *)(desc + 1); 3067 head = (caddr_t)(mpdu + 1); 3068 len = le16toh(mpdu->len); 3069 } else { 3070 head = (caddr_t)(stat + 1) + stat->cfg_phy_len; 3071 len = le16toh(stat->len); 3072 } 3073 3074 flags = le32toh(*(uint32_t *)(head + len)); 3075 3076 /* Discard frames with a bad FCS early. */ 3077 if ((flags & IWN_RX_NOERROR) != IWN_RX_NOERROR) { 3078 DPRINTF(sc, IWN_DEBUG_RECV, "%s: RX flags error %x\n", 3079 __func__, flags); 3080 counter_u64_add(ic->ic_ierrors, 1); 3081 return; 3082 } 3083 /* Discard frames that are too short. */ 3084 if (len < sizeof (struct ieee80211_frame_ack)) { 3085 DPRINTF(sc, IWN_DEBUG_RECV, "%s: frame too short: %d\n", 3086 __func__, len); 3087 counter_u64_add(ic->ic_ierrors, 1); 3088 return; 3089 } 3090 3091 m1 = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, IWN_RBUF_SIZE); 3092 if (m1 == NULL) { 3093 DPRINTF(sc, IWN_DEBUG_ANY, "%s: no mbuf to restock ring\n", 3094 __func__); 3095 counter_u64_add(ic->ic_ierrors, 1); 3096 return; 3097 } 3098 bus_dmamap_unload(ring->data_dmat, data->map); 3099 3100 error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m1, void *), 3101 IWN_RBUF_SIZE, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 3102 if (error != 0 && error != EFBIG) { 3103 device_printf(sc->sc_dev, 3104 "%s: bus_dmamap_load failed, error %d\n", __func__, error); 3105 m_freem(m1); 3106 3107 /* Try to reload the old mbuf. */ 3108 error = bus_dmamap_load(ring->data_dmat, data->map, 3109 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 3110 &paddr, BUS_DMA_NOWAIT); 3111 if (error != 0 && error != EFBIG) { 3112 panic("%s: could not load old RX mbuf", __func__); 3113 } 3114 bus_dmamap_sync(ring->data_dmat, data->map, 3115 BUS_DMASYNC_PREREAD); 3116 /* Physical address may have changed. */ 3117 ring->desc[ring->cur] = htole32(paddr >> 8); 3118 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 3119 BUS_DMASYNC_PREWRITE); 3120 counter_u64_add(ic->ic_ierrors, 1); 3121 return; 3122 } 3123 3124 bus_dmamap_sync(ring->data_dmat, data->map, 3125 BUS_DMASYNC_PREREAD); 3126 3127 m = data->m; 3128 data->m = m1; 3129 /* Update RX descriptor. */ 3130 ring->desc[ring->cur] = htole32(paddr >> 8); 3131 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 3132 BUS_DMASYNC_PREWRITE); 3133 3134 /* Finalize mbuf. */ 3135 m->m_data = head; 3136 m->m_pkthdr.len = m->m_len = len; 3137 3138 /* Grab a reference to the source node. */ 3139 wh = mtod(m, struct ieee80211_frame_min *); 3140 if (len >= sizeof(struct ieee80211_frame_min)) 3141 ni = ieee80211_find_rxnode(ic, wh); 3142 else 3143 ni = NULL; 3144 nf = (ni != NULL && ni->ni_vap->iv_state == IEEE80211_S_RUN && 3145 (ic->ic_flags & IEEE80211_F_SCAN) == 0) ? sc->noise : -95; 3146 3147 rssi = ops->get_rssi(sc, stat); 3148 3149 if (ieee80211_radiotap_active(ic)) { 3150 struct iwn_rx_radiotap_header *tap = &sc->sc_rxtap; 3151 uint32_t rate = le32toh(stat->rate); 3152 3153 tap->wr_flags = 0; 3154 if (stat->flags & htole16(IWN_STAT_FLAG_SHPREAMBLE)) 3155 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 3156 tap->wr_dbm_antsignal = (int8_t)rssi; 3157 tap->wr_dbm_antnoise = (int8_t)nf; 3158 tap->wr_tsft = stat->tstamp; 3159 if (rate & IWN_RFLAG_MCS) { 3160 tap->wr_rate = rate & IWN_RFLAG_RATE_MCS; 3161 tap->wr_rate |= IEEE80211_RATE_MCS; 3162 } else 3163 tap->wr_rate = plcp2rate(rate & IWN_RFLAG_RATE); 3164 } 3165 3166 /* 3167 * If it's a beacon and we're waiting, then do the 3168 * wakeup. This should unblock raw_xmit/start. 3169 */ 3170 if (sc->sc_beacon_wait) { 3171 uint8_t type, subtype; 3172 /* NB: Re-assign wh */ 3173 wh = mtod(m, struct ieee80211_frame_min *); 3174 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3175 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 3176 /* 3177 * This assumes at this point we've received our own 3178 * beacon. 3179 */ 3180 DPRINTF(sc, IWN_DEBUG_TRACE, 3181 "%s: beacon_wait, type=%d, subtype=%d\n", 3182 __func__, type, subtype); 3183 if (type == IEEE80211_FC0_TYPE_MGT && 3184 subtype == IEEE80211_FC0_SUBTYPE_BEACON) { 3185 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, 3186 "%s: waking things up\n", __func__); 3187 /* queue taskqueue to transmit! */ 3188 taskqueue_enqueue(sc->sc_tq, &sc->sc_xmit_task); 3189 } 3190 } 3191 3192 IWN_UNLOCK(sc); 3193 3194 /* Send the frame to the 802.11 layer. */ 3195 if (ni != NULL) { 3196 if (ni->ni_flags & IEEE80211_NODE_HT) 3197 m->m_flags |= M_AMPDU; 3198 (void)ieee80211_input(ni, m, rssi - nf, nf); 3199 /* Node is no longer needed. */ 3200 ieee80211_free_node(ni); 3201 } else 3202 (void)ieee80211_input_all(ic, m, rssi - nf, nf); 3203 3204 IWN_LOCK(sc); 3205 3206 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3207 3208 } 3209 3210 static void 3211 iwn_agg_tx_complete(struct iwn_softc *sc, struct iwn_tx_ring *ring, int tid, 3212 int idx, int success) 3213 { 3214 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 3215 struct iwn_tx_data *data = &ring->data[idx]; 3216 struct iwn_node *wn; 3217 struct mbuf *m; 3218 struct ieee80211_node *ni; 3219 3220 KASSERT(data->ni != NULL, ("idx %d: no node", idx)); 3221 KASSERT(data->m != NULL, ("idx %d: no mbuf", idx)); 3222 3223 /* Unmap and free mbuf. */ 3224 bus_dmamap_sync(ring->data_dmat, data->map, 3225 BUS_DMASYNC_POSTWRITE); 3226 bus_dmamap_unload(ring->data_dmat, data->map); 3227 m = data->m, data->m = NULL; 3228 ni = data->ni, data->ni = NULL; 3229 wn = (void *)ni; 3230 3231 #if 0 3232 /* XXX causes significant performance degradation. */ 3233 txs->flags = IEEE80211_RATECTL_STATUS_SHORT_RETRY | 3234 IEEE80211_RATECTL_STATUS_LONG_RETRY; 3235 txs->long_retries = data->long_retries - 1; 3236 #else 3237 txs->flags = IEEE80211_RATECTL_STATUS_SHORT_RETRY; 3238 #endif 3239 txs->short_retries = wn->agg[tid].short_retries; 3240 if (success) 3241 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 3242 else 3243 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED; 3244 3245 wn->agg[tid].short_retries = 0; 3246 data->long_retries = 0; 3247 3248 DPRINTF(sc, IWN_DEBUG_AMPDU, "%s: freeing m %p ni %p idx %d qid %d\n", 3249 __func__, m, ni, idx, ring->qid); 3250 ieee80211_ratectl_tx_complete(ni, txs); 3251 ieee80211_tx_complete(ni, m, !success); 3252 } 3253 3254 /* Process an incoming Compressed BlockAck. */ 3255 static void 3256 iwn_rx_compressed_ba(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3257 { 3258 struct iwn_tx_ring *ring; 3259 struct iwn_tx_data *data; 3260 struct iwn_node *wn; 3261 struct iwn_compressed_ba *ba = (struct iwn_compressed_ba *)(desc + 1); 3262 struct ieee80211_tx_ampdu *tap; 3263 uint64_t bitmap; 3264 uint8_t tid; 3265 int i, qid, shift; 3266 int tx_ok = 0; 3267 3268 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3269 3270 qid = le16toh(ba->qid); 3271 tap = sc->qid2tap[qid]; 3272 ring = &sc->txq[qid]; 3273 tid = tap->txa_tid; 3274 wn = (void *)tap->txa_ni; 3275 3276 DPRINTF(sc, IWN_DEBUG_AMPDU, "%s: qid %d tid %d seq %04X ssn %04X\n" 3277 "bitmap: ba %016jX wn %016jX, start %d\n", 3278 __func__, qid, tid, le16toh(ba->seq), le16toh(ba->ssn), 3279 (uintmax_t)le64toh(ba->bitmap), (uintmax_t)wn->agg[tid].bitmap, 3280 wn->agg[tid].startidx); 3281 3282 if (wn->agg[tid].bitmap == 0) 3283 return; 3284 3285 shift = wn->agg[tid].startidx - ((le16toh(ba->seq) >> 4) & 0xff); 3286 if (shift <= -64) 3287 shift += 0x100; 3288 3289 /* 3290 * Walk the bitmap and calculate how many successful attempts 3291 * are made. 3292 * 3293 * Yes, the rate control code doesn't know these are A-MPDU 3294 * subframes; due to that long_retries stats are not used here. 3295 */ 3296 bitmap = le64toh(ba->bitmap); 3297 if (shift >= 0) 3298 bitmap >>= shift; 3299 else 3300 bitmap <<= -shift; 3301 bitmap &= wn->agg[tid].bitmap; 3302 wn->agg[tid].bitmap = 0; 3303 3304 for (i = wn->agg[tid].startidx; 3305 bitmap; 3306 bitmap >>= 1, i = (i + 1) % IWN_TX_RING_COUNT) { 3307 if ((bitmap & 1) == 0) 3308 continue; 3309 3310 data = &ring->data[i]; 3311 if (__predict_false(data->m == NULL)) { 3312 /* 3313 * There is no frame; skip this entry. 3314 * 3315 * NB: it is "ok" to have both 3316 * 'tx done' + 'compressed BA' replies for frame 3317 * with STATE_SCD_QUERY status. 3318 */ 3319 DPRINTF(sc, IWN_DEBUG_AMPDU, 3320 "%s: ring %d: no entry %d\n", __func__, qid, i); 3321 continue; 3322 } 3323 3324 tx_ok++; 3325 iwn_agg_tx_complete(sc, ring, tid, i, 1); 3326 } 3327 3328 ring->queued -= tx_ok; 3329 iwn_check_tx_ring(sc, qid); 3330 3331 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_AMPDU, 3332 "->%s: end; %d ok\n",__func__, tx_ok); 3333 } 3334 3335 /* 3336 * Process a CALIBRATION_RESULT notification sent by the initialization 3337 * firmware on response to a CMD_CALIB_CONFIG command (5000 only). 3338 */ 3339 static void 3340 iwn5000_rx_calib_results(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3341 { 3342 struct iwn_phy_calib *calib = (struct iwn_phy_calib *)(desc + 1); 3343 int len, idx = -1; 3344 3345 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3346 3347 /* Runtime firmware should not send such a notification. */ 3348 if (sc->sc_flags & IWN_FLAG_CALIB_DONE){ 3349 DPRINTF(sc, IWN_DEBUG_TRACE, 3350 "->%s received after calib done\n", __func__); 3351 return; 3352 } 3353 len = (le32toh(desc->len) & 0x3fff) - 4; 3354 3355 switch (calib->code) { 3356 case IWN5000_PHY_CALIB_DC: 3357 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_DC) 3358 idx = 0; 3359 break; 3360 case IWN5000_PHY_CALIB_LO: 3361 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_LO) 3362 idx = 1; 3363 break; 3364 case IWN5000_PHY_CALIB_TX_IQ: 3365 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ) 3366 idx = 2; 3367 break; 3368 case IWN5000_PHY_CALIB_TX_IQ_PERIODIC: 3369 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC) 3370 idx = 3; 3371 break; 3372 case IWN5000_PHY_CALIB_BASE_BAND: 3373 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_BASE_BAND) 3374 idx = 4; 3375 break; 3376 } 3377 if (idx == -1) /* Ignore other results. */ 3378 return; 3379 3380 /* Save calibration result. */ 3381 if (sc->calibcmd[idx].buf != NULL) 3382 free(sc->calibcmd[idx].buf, M_DEVBUF); 3383 sc->calibcmd[idx].buf = malloc(len, M_DEVBUF, M_NOWAIT); 3384 if (sc->calibcmd[idx].buf == NULL) { 3385 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3386 "not enough memory for calibration result %d\n", 3387 calib->code); 3388 return; 3389 } 3390 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3391 "saving calibration result idx=%d, code=%d len=%d\n", idx, calib->code, len); 3392 sc->calibcmd[idx].len = len; 3393 memcpy(sc->calibcmd[idx].buf, calib, len); 3394 } 3395 3396 static void 3397 iwn_stats_update(struct iwn_softc *sc, struct iwn_calib_state *calib, 3398 struct iwn_stats *stats, int len) 3399 { 3400 struct iwn_stats_bt *stats_bt; 3401 struct iwn_stats *lstats; 3402 3403 /* 3404 * First - check whether the length is the bluetooth or normal. 3405 * 3406 * If it's normal - just copy it and bump out. 3407 * Otherwise we have to convert things. 3408 */ 3409 3410 if (len == sizeof(struct iwn_stats) + 4) { 3411 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3412 sc->last_stat_valid = 1; 3413 return; 3414 } 3415 3416 /* 3417 * If it's not the bluetooth size - log, then just copy. 3418 */ 3419 if (len != sizeof(struct iwn_stats_bt) + 4) { 3420 DPRINTF(sc, IWN_DEBUG_STATS, 3421 "%s: size of rx statistics (%d) not an expected size!\n", 3422 __func__, 3423 len); 3424 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3425 sc->last_stat_valid = 1; 3426 return; 3427 } 3428 3429 /* 3430 * Ok. Time to copy. 3431 */ 3432 stats_bt = (struct iwn_stats_bt *) stats; 3433 lstats = &sc->last_stat; 3434 3435 /* flags */ 3436 lstats->flags = stats_bt->flags; 3437 /* rx_bt */ 3438 memcpy(&lstats->rx.ofdm, &stats_bt->rx_bt.ofdm, 3439 sizeof(struct iwn_rx_phy_stats)); 3440 memcpy(&lstats->rx.cck, &stats_bt->rx_bt.cck, 3441 sizeof(struct iwn_rx_phy_stats)); 3442 memcpy(&lstats->rx.general, &stats_bt->rx_bt.general_bt.common, 3443 sizeof(struct iwn_rx_general_stats)); 3444 memcpy(&lstats->rx.ht, &stats_bt->rx_bt.ht, 3445 sizeof(struct iwn_rx_ht_phy_stats)); 3446 /* tx */ 3447 memcpy(&lstats->tx, &stats_bt->tx, 3448 sizeof(struct iwn_tx_stats)); 3449 /* general */ 3450 memcpy(&lstats->general, &stats_bt->general, 3451 sizeof(struct iwn_general_stats)); 3452 3453 /* XXX TODO: Squirrel away the extra bluetooth stats somewhere */ 3454 sc->last_stat_valid = 1; 3455 } 3456 3457 /* 3458 * Process an RX_STATISTICS or BEACON_STATISTICS firmware notification. 3459 * The latter is sent by the firmware after each received beacon. 3460 */ 3461 static void 3462 iwn_rx_statistics(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3463 { 3464 struct iwn_ops *ops = &sc->ops; 3465 struct ieee80211com *ic = &sc->sc_ic; 3466 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3467 struct iwn_calib_state *calib = &sc->calib; 3468 struct iwn_stats *stats = (struct iwn_stats *)(desc + 1); 3469 struct iwn_stats *lstats; 3470 int temp; 3471 3472 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3473 3474 /* Ignore statistics received during a scan. */ 3475 if (vap->iv_state != IEEE80211_S_RUN || 3476 (ic->ic_flags & IEEE80211_F_SCAN)){ 3477 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received during calib\n", 3478 __func__); 3479 return; 3480 } 3481 3482 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_STATS, 3483 "%s: received statistics, cmd %d, len %d\n", 3484 __func__, desc->type, le16toh(desc->len)); 3485 sc->calib_cnt = 0; /* Reset TX power calibration timeout. */ 3486 3487 /* 3488 * Collect/track general statistics for reporting. 3489 * 3490 * This takes care of ensuring that the bluetooth sized message 3491 * will be correctly converted to the legacy sized message. 3492 */ 3493 iwn_stats_update(sc, calib, stats, le16toh(desc->len)); 3494 3495 /* 3496 * And now, let's take a reference of it to use! 3497 */ 3498 lstats = &sc->last_stat; 3499 3500 /* Test if temperature has changed. */ 3501 if (lstats->general.temp != sc->rawtemp) { 3502 /* Convert "raw" temperature to degC. */ 3503 sc->rawtemp = stats->general.temp; 3504 temp = ops->get_temperature(sc); 3505 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d\n", 3506 __func__, temp); 3507 3508 /* Update TX power if need be (4965AGN only). */ 3509 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 3510 iwn4965_power_calibration(sc, temp); 3511 } 3512 3513 if (desc->type != IWN_BEACON_STATISTICS) 3514 return; /* Reply to a statistics request. */ 3515 3516 sc->noise = iwn_get_noise(&lstats->rx.general); 3517 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: noise %d\n", __func__, sc->noise); 3518 3519 /* Test that RSSI and noise are present in stats report. */ 3520 if (le32toh(lstats->rx.general.flags) != 1) { 3521 DPRINTF(sc, IWN_DEBUG_ANY, "%s\n", 3522 "received statistics without RSSI"); 3523 return; 3524 } 3525 3526 if (calib->state == IWN_CALIB_STATE_ASSOC) 3527 iwn_collect_noise(sc, &lstats->rx.general); 3528 else if (calib->state == IWN_CALIB_STATE_RUN) { 3529 iwn_tune_sensitivity(sc, &lstats->rx); 3530 /* 3531 * XXX TODO: Only run the RX recovery if we're associated! 3532 */ 3533 iwn_check_rx_recovery(sc, lstats); 3534 iwn_save_stats_counters(sc, lstats); 3535 } 3536 3537 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3538 } 3539 3540 /* 3541 * Save the relevant statistic counters for the next calibration 3542 * pass. 3543 */ 3544 static void 3545 iwn_save_stats_counters(struct iwn_softc *sc, const struct iwn_stats *rs) 3546 { 3547 struct iwn_calib_state *calib = &sc->calib; 3548 3549 /* Save counters values for next call. */ 3550 calib->bad_plcp_cck = le32toh(rs->rx.cck.bad_plcp); 3551 calib->fa_cck = le32toh(rs->rx.cck.fa); 3552 calib->bad_plcp_ht = le32toh(rs->rx.ht.bad_plcp); 3553 calib->bad_plcp_ofdm = le32toh(rs->rx.ofdm.bad_plcp); 3554 calib->fa_ofdm = le32toh(rs->rx.ofdm.fa); 3555 3556 /* Last time we received these tick values */ 3557 sc->last_calib_ticks = ticks; 3558 } 3559 3560 /* 3561 * Process a TX_DONE firmware notification. Unfortunately, the 4965AGN 3562 * and 5000 adapters have different incompatible TX status formats. 3563 */ 3564 static void 3565 iwn4965_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3566 struct iwn_rx_data *data) 3567 { 3568 struct iwn4965_tx_stat *stat = (struct iwn4965_tx_stat *)(desc + 1); 3569 int qid = desc->qid & IWN_RX_DESC_QID_MSK; 3570 3571 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3572 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3573 __func__, desc->qid, desc->idx, 3574 stat->rtsfailcnt, 3575 stat->ackfailcnt, 3576 stat->btkillcnt, 3577 stat->rate, le16toh(stat->duration), 3578 le32toh(stat->status)); 3579 3580 if (qid >= sc->firstaggqueue && stat->nframes != 1) { 3581 iwn_ampdu_tx_done(sc, qid, stat->nframes, stat->rtsfailcnt, 3582 &stat->status); 3583 } else { 3584 iwn_tx_done(sc, desc, stat->rtsfailcnt, stat->ackfailcnt, 3585 le32toh(stat->status) & 0xff); 3586 } 3587 } 3588 3589 static void 3590 iwn5000_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3591 struct iwn_rx_data *data) 3592 { 3593 struct iwn5000_tx_stat *stat = (struct iwn5000_tx_stat *)(desc + 1); 3594 int qid = desc->qid & IWN_RX_DESC_QID_MSK; 3595 3596 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3597 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3598 __func__, desc->qid, desc->idx, 3599 stat->rtsfailcnt, 3600 stat->ackfailcnt, 3601 stat->btkillcnt, 3602 stat->rate, le16toh(stat->duration), 3603 le32toh(stat->status)); 3604 3605 #ifdef notyet 3606 /* Reset TX scheduler slot. */ 3607 iwn5000_reset_sched(sc, qid, desc->idx); 3608 #endif 3609 3610 if (qid >= sc->firstaggqueue && stat->nframes != 1) { 3611 iwn_ampdu_tx_done(sc, qid, stat->nframes, stat->rtsfailcnt, 3612 &stat->status); 3613 } else { 3614 iwn_tx_done(sc, desc, stat->rtsfailcnt, stat->ackfailcnt, 3615 le16toh(stat->status) & 0xff); 3616 } 3617 } 3618 3619 static void 3620 iwn_adj_ampdu_ptr(struct iwn_softc *sc, struct iwn_tx_ring *ring) 3621 { 3622 int i; 3623 3624 for (i = ring->read; i != ring->cur; i = (i + 1) % IWN_TX_RING_COUNT) { 3625 struct iwn_tx_data *data = &ring->data[i]; 3626 3627 if (data->m != NULL) 3628 break; 3629 3630 data->remapped = 0; 3631 } 3632 3633 ring->read = i; 3634 } 3635 3636 /* 3637 * Adapter-independent backend for TX_DONE firmware notifications. 3638 */ 3639 static void 3640 iwn_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, int rtsfailcnt, 3641 int ackfailcnt, uint8_t status) 3642 { 3643 struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs; 3644 struct iwn_tx_ring *ring = &sc->txq[desc->qid & IWN_RX_DESC_QID_MSK]; 3645 struct iwn_tx_data *data = &ring->data[desc->idx]; 3646 struct mbuf *m; 3647 struct ieee80211_node *ni; 3648 3649 if (__predict_false(data->m == NULL && 3650 ring->qid >= sc->firstaggqueue)) { 3651 /* 3652 * There is no frame; skip this entry. 3653 */ 3654 DPRINTF(sc, IWN_DEBUG_AMPDU, "%s: ring %d: no entry %d\n", 3655 __func__, ring->qid, desc->idx); 3656 return; 3657 } 3658 3659 KASSERT(data->ni != NULL, ("no node")); 3660 KASSERT(data->m != NULL, ("no mbuf")); 3661 3662 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3663 3664 /* Unmap and free mbuf. */ 3665 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); 3666 bus_dmamap_unload(ring->data_dmat, data->map); 3667 m = data->m, data->m = NULL; 3668 ni = data->ni, data->ni = NULL; 3669 3670 data->long_retries = 0; 3671 3672 if (ring->qid >= sc->firstaggqueue) 3673 iwn_adj_ampdu_ptr(sc, ring); 3674 3675 /* 3676 * XXX f/w may hang (device timeout) when desc->idx - ring->read == 64 3677 * (aggregation queues only). 3678 */ 3679 3680 ring->queued--; 3681 iwn_check_tx_ring(sc, ring->qid); 3682 3683 /* 3684 * Update rate control statistics for the node. 3685 */ 3686 txs->flags = IEEE80211_RATECTL_STATUS_SHORT_RETRY | 3687 IEEE80211_RATECTL_STATUS_LONG_RETRY; 3688 txs->short_retries = rtsfailcnt; 3689 txs->long_retries = ackfailcnt; 3690 if (!(status & IWN_TX_FAIL)) 3691 txs->status = IEEE80211_RATECTL_TX_SUCCESS; 3692 else { 3693 switch (status) { 3694 case IWN_TX_FAIL_SHORT_LIMIT: 3695 txs->status = IEEE80211_RATECTL_TX_FAIL_SHORT; 3696 break; 3697 case IWN_TX_FAIL_LONG_LIMIT: 3698 txs->status = IEEE80211_RATECTL_TX_FAIL_LONG; 3699 break; 3700 case IWN_TX_STATUS_FAIL_LIFE_EXPIRE: 3701 txs->status = IEEE80211_RATECTL_TX_FAIL_EXPIRED; 3702 break; 3703 default: 3704 txs->status = IEEE80211_RATECTL_TX_FAIL_UNSPECIFIED; 3705 break; 3706 } 3707 } 3708 ieee80211_ratectl_tx_complete(ni, txs); 3709 3710 /* 3711 * Channels marked for "radar" require traffic to be received 3712 * to unlock before we can transmit. Until traffic is seen 3713 * any attempt to transmit is returned immediately with status 3714 * set to IWN_TX_FAIL_TX_LOCKED. Unfortunately this can easily 3715 * happen on first authenticate after scanning. To workaround 3716 * this we ignore a failure of this sort in AUTH state so the 3717 * 802.11 layer will fall back to using a timeout to wait for 3718 * the AUTH reply. This allows the firmware time to see 3719 * traffic so a subsequent retry of AUTH succeeds. It's 3720 * unclear why the firmware does not maintain state for 3721 * channels recently visited as this would allow immediate 3722 * use of the channel after a scan (where we see traffic). 3723 */ 3724 if (status == IWN_TX_FAIL_TX_LOCKED && 3725 ni->ni_vap->iv_state == IEEE80211_S_AUTH) 3726 ieee80211_tx_complete(ni, m, 0); 3727 else 3728 ieee80211_tx_complete(ni, m, 3729 (status & IWN_TX_FAIL) != 0); 3730 3731 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3732 } 3733 3734 /* 3735 * Process a "command done" firmware notification. This is where we wakeup 3736 * processes waiting for a synchronous command completion. 3737 */ 3738 static void 3739 iwn_cmd_done(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3740 { 3741 struct iwn_tx_ring *ring; 3742 struct iwn_tx_data *data; 3743 int cmd_queue_num; 3744 3745 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 3746 cmd_queue_num = IWN_PAN_CMD_QUEUE; 3747 else 3748 cmd_queue_num = IWN_CMD_QUEUE_NUM; 3749 3750 if ((desc->qid & IWN_RX_DESC_QID_MSK) != cmd_queue_num) 3751 return; /* Not a command ack. */ 3752 3753 ring = &sc->txq[cmd_queue_num]; 3754 data = &ring->data[desc->idx]; 3755 3756 /* If the command was mapped in an mbuf, free it. */ 3757 if (data->m != NULL) { 3758 bus_dmamap_sync(ring->data_dmat, data->map, 3759 BUS_DMASYNC_POSTWRITE); 3760 bus_dmamap_unload(ring->data_dmat, data->map); 3761 m_freem(data->m); 3762 data->m = NULL; 3763 } 3764 wakeup(&ring->desc[desc->idx]); 3765 } 3766 3767 static int 3768 iwn_ampdu_check_bitmap(uint64_t bitmap, int start, int idx) 3769 { 3770 int bit, shift; 3771 3772 bit = idx - start; 3773 shift = 0; 3774 if (bit >= 64) { 3775 shift = 0x100 - bit; 3776 bit = 0; 3777 } else if (bit <= -64) 3778 bit = 0x100 + bit; 3779 else if (bit < 0) { 3780 shift = -bit; 3781 bit = 0; 3782 } 3783 3784 if (bit - shift >= 64) 3785 return (0); 3786 3787 return ((bitmap & (1ULL << (bit - shift))) != 0); 3788 } 3789 3790 /* 3791 * Firmware bug workaround: in case if 'retries' counter 3792 * overflows 'seqno' field will be incremented: 3793 * status|sequence|status|sequence|status|sequence 3794 * 0000 0A48 0001 0A49 0000 0A6A 3795 * 1000 0A48 1000 0A49 1000 0A6A 3796 * 2000 0A48 2000 0A49 2000 0A6A 3797 * ... 3798 * E000 0A48 E000 0A49 E000 0A6A 3799 * F000 0A48 F000 0A49 F000 0A6A 3800 * 0000 0A49 0000 0A49 0000 0A6B 3801 * 1000 0A49 1000 0A49 1000 0A6B 3802 * ... 3803 * D000 0A49 D000 0A49 D000 0A6B 3804 * E000 0A49 E001 0A49 E000 0A6B 3805 * F000 0A49 F001 0A49 F000 0A6B 3806 * 0000 0A4A 0000 0A4B 0000 0A6A 3807 * 1000 0A4A 1000 0A4B 1000 0A6A 3808 * ... 3809 * 3810 * Odd 'seqno' numbers are incremened by 2 every 2 overflows. 3811 * For even 'seqno' % 4 != 0 overflow is cyclic (0 -> +1 -> 0). 3812 * Not checked with nretries >= 64. 3813 * 3814 */ 3815 static int 3816 iwn_ampdu_index_check(struct iwn_softc *sc, struct iwn_tx_ring *ring, 3817 uint64_t bitmap, int start, int idx) 3818 { 3819 struct ieee80211com *ic = &sc->sc_ic; 3820 struct iwn_tx_data *data; 3821 int diff, min_retries, max_retries, new_idx, loop_end; 3822 3823 new_idx = idx - IWN_LONG_RETRY_LIMIT_LOG; 3824 if (new_idx < 0) 3825 new_idx += IWN_TX_RING_COUNT; 3826 3827 /* 3828 * Corner case: check if retry count is not too big; 3829 * reset device otherwise. 3830 */ 3831 if (!iwn_ampdu_check_bitmap(bitmap, start, new_idx)) { 3832 data = &ring->data[new_idx]; 3833 if (data->long_retries > IWN_LONG_RETRY_LIMIT) { 3834 device_printf(sc->sc_dev, 3835 "%s: retry count (%d) for idx %d/%d overflow, " 3836 "resetting...\n", __func__, data->long_retries, 3837 ring->qid, new_idx); 3838 ieee80211_restart_all(ic); 3839 return (-1); 3840 } 3841 } 3842 3843 /* Correct index if needed. */ 3844 loop_end = idx; 3845 do { 3846 data = &ring->data[new_idx]; 3847 diff = idx - new_idx; 3848 if (diff < 0) 3849 diff += IWN_TX_RING_COUNT; 3850 3851 min_retries = IWN_LONG_RETRY_FW_OVERFLOW * diff; 3852 if ((new_idx % 2) == 0) 3853 max_retries = IWN_LONG_RETRY_FW_OVERFLOW * (diff + 1); 3854 else 3855 max_retries = IWN_LONG_RETRY_FW_OVERFLOW * (diff + 2); 3856 3857 if (!iwn_ampdu_check_bitmap(bitmap, start, new_idx) && 3858 ((data->long_retries >= min_retries && 3859 data->long_retries < max_retries) || 3860 (diff == 1 && 3861 (new_idx & 0x03) == 0x02 && 3862 data->long_retries >= IWN_LONG_RETRY_FW_OVERFLOW))) { 3863 DPRINTF(sc, IWN_DEBUG_AMPDU, 3864 "%s: correcting index %d -> %d in queue %d" 3865 " (retries %d)\n", __func__, idx, new_idx, 3866 ring->qid, data->long_retries); 3867 return (new_idx); 3868 } 3869 3870 new_idx = (new_idx + 1) % IWN_TX_RING_COUNT; 3871 } while (new_idx != loop_end); 3872 3873 return (idx); 3874 } 3875 3876 static void 3877 iwn_ampdu_tx_done(struct iwn_softc *sc, int qid, int nframes, int rtsfailcnt, 3878 void *stat) 3879 { 3880 struct iwn_tx_ring *ring = &sc->txq[qid]; 3881 struct ieee80211_tx_ampdu *tap = sc->qid2tap[qid]; 3882 struct iwn_node *wn = (void *)tap->txa_ni; 3883 struct iwn_tx_data *data; 3884 uint64_t bitmap = 0; 3885 uint16_t *aggstatus = stat; 3886 uint8_t tid = tap->txa_tid; 3887 int bit, i, idx, shift, start, tx_err; 3888 3889 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3890 3891 start = le16toh(*(aggstatus + nframes * 2)) & 0xff; 3892 3893 for (i = 0; i < nframes; i++) { 3894 uint16_t status = le16toh(aggstatus[i * 2]); 3895 3896 if (status & IWN_AGG_TX_STATE_IGNORE_MASK) 3897 continue; 3898 3899 idx = le16toh(aggstatus[i * 2 + 1]) & 0xff; 3900 data = &ring->data[idx]; 3901 if (data->remapped) { 3902 idx = iwn_ampdu_index_check(sc, ring, bitmap, start, idx); 3903 if (idx == -1) { 3904 /* skip error (device will be restarted anyway). */ 3905 continue; 3906 } 3907 3908 /* Index may have changed. */ 3909 data = &ring->data[idx]; 3910 } 3911 3912 /* 3913 * XXX Sometimes (rarely) some frames are excluded from events. 3914 * XXX Due to that long_retries counter may be wrong. 3915 */ 3916 data->long_retries &= ~0x0f; 3917 data->long_retries += IWN_AGG_TX_TRY_COUNT(status) + 1; 3918 3919 if (data->long_retries >= IWN_LONG_RETRY_FW_OVERFLOW) { 3920 int diff, wrong_idx; 3921 3922 diff = data->long_retries / IWN_LONG_RETRY_FW_OVERFLOW; 3923 wrong_idx = (idx + diff) % IWN_TX_RING_COUNT; 3924 3925 /* 3926 * Mark the entry so the above code will check it 3927 * next time. 3928 */ 3929 ring->data[wrong_idx].remapped = 1; 3930 } 3931 3932 if (status & IWN_AGG_TX_STATE_UNDERRUN_MSK) { 3933 /* 3934 * NB: count retries but postpone - it was not 3935 * transmitted. 3936 */ 3937 continue; 3938 } 3939 3940 bit = idx - start; 3941 shift = 0; 3942 if (bit >= 64) { 3943 shift = 0x100 - bit; 3944 bit = 0; 3945 } else if (bit <= -64) 3946 bit = 0x100 + bit; 3947 else if (bit < 0) { 3948 shift = -bit; 3949 bit = 0; 3950 } 3951 bitmap = bitmap << shift; 3952 bitmap |= 1ULL << bit; 3953 } 3954 wn->agg[tid].startidx = start; 3955 wn->agg[tid].bitmap = bitmap; 3956 wn->agg[tid].short_retries = rtsfailcnt; 3957 3958 DPRINTF(sc, IWN_DEBUG_AMPDU, "%s: nframes %d start %d bitmap %016jX\n", 3959 __func__, nframes, start, (uintmax_t)bitmap); 3960 3961 i = ring->read; 3962 3963 for (tx_err = 0; 3964 i != wn->agg[tid].startidx; 3965 i = (i + 1) % IWN_TX_RING_COUNT) { 3966 data = &ring->data[i]; 3967 data->remapped = 0; 3968 if (data->m == NULL) 3969 continue; 3970 3971 tx_err++; 3972 iwn_agg_tx_complete(sc, ring, tid, i, 0); 3973 } 3974 3975 ring->read = wn->agg[tid].startidx; 3976 ring->queued -= tx_err; 3977 3978 iwn_check_tx_ring(sc, qid); 3979 3980 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3981 } 3982 3983 /* 3984 * Process an INT_FH_RX or INT_SW_RX interrupt. 3985 */ 3986 static void 3987 iwn_notif_intr(struct iwn_softc *sc) 3988 { 3989 struct iwn_ops *ops = &sc->ops; 3990 struct ieee80211com *ic = &sc->sc_ic; 3991 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3992 uint16_t hw; 3993 int is_stopped; 3994 3995 bus_dmamap_sync(sc->rxq.stat_dma.tag, sc->rxq.stat_dma.map, 3996 BUS_DMASYNC_POSTREAD); 3997 3998 hw = le16toh(sc->rxq.stat->closed_count) & 0xfff; 3999 while (sc->rxq.cur != hw) { 4000 struct iwn_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 4001 struct iwn_rx_desc *desc; 4002 4003 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 4004 BUS_DMASYNC_POSTREAD); 4005 desc = mtod(data->m, struct iwn_rx_desc *); 4006 4007 DPRINTF(sc, IWN_DEBUG_RECV, 4008 "%s: cur=%d; qid %x idx %d flags %x type %d(%s) len %d\n", 4009 __func__, sc->rxq.cur, desc->qid & IWN_RX_DESC_QID_MSK, 4010 desc->idx, desc->flags, desc->type, 4011 iwn_intr_str(desc->type), le16toh(desc->len)); 4012 4013 if (!(desc->qid & IWN_UNSOLICITED_RX_NOTIF)) /* Reply to a command. */ 4014 iwn_cmd_done(sc, desc); 4015 4016 switch (desc->type) { 4017 case IWN_RX_PHY: 4018 iwn_rx_phy(sc, desc); 4019 break; 4020 4021 case IWN_RX_DONE: /* 4965AGN only. */ 4022 case IWN_MPDU_RX_DONE: 4023 /* An 802.11 frame has been received. */ 4024 iwn_rx_done(sc, desc, data); 4025 4026 is_stopped = (sc->sc_flags & IWN_FLAG_RUNNING) == 0; 4027 if (__predict_false(is_stopped)) 4028 return; 4029 4030 break; 4031 4032 case IWN_RX_COMPRESSED_BA: 4033 /* A Compressed BlockAck has been received. */ 4034 iwn_rx_compressed_ba(sc, desc); 4035 break; 4036 4037 case IWN_TX_DONE: 4038 /* An 802.11 frame has been transmitted. */ 4039 ops->tx_done(sc, desc, data); 4040 break; 4041 4042 case IWN_RX_STATISTICS: 4043 case IWN_BEACON_STATISTICS: 4044 iwn_rx_statistics(sc, desc); 4045 break; 4046 4047 case IWN_BEACON_MISSED: 4048 { 4049 struct iwn_beacon_missed *miss = 4050 (struct iwn_beacon_missed *)(desc + 1); 4051 int misses; 4052 4053 misses = le32toh(miss->consecutive); 4054 4055 DPRINTF(sc, IWN_DEBUG_STATE, 4056 "%s: beacons missed %d/%d\n", __func__, 4057 misses, le32toh(miss->total)); 4058 /* 4059 * If more than 5 consecutive beacons are missed, 4060 * reinitialize the sensitivity state machine. 4061 */ 4062 if (vap->iv_state == IEEE80211_S_RUN && 4063 (ic->ic_flags & IEEE80211_F_SCAN) == 0) { 4064 if (misses > 5) 4065 (void)iwn_init_sensitivity(sc); 4066 if (misses >= vap->iv_bmissthreshold) { 4067 IWN_UNLOCK(sc); 4068 ieee80211_beacon_miss(ic); 4069 IWN_LOCK(sc); 4070 4071 is_stopped = (sc->sc_flags & 4072 IWN_FLAG_RUNNING) == 0; 4073 if (__predict_false(is_stopped)) 4074 return; 4075 } 4076 } 4077 break; 4078 } 4079 case IWN_UC_READY: 4080 { 4081 struct iwn_ucode_info *uc = 4082 (struct iwn_ucode_info *)(desc + 1); 4083 4084 /* The microcontroller is ready. */ 4085 DPRINTF(sc, IWN_DEBUG_RESET, 4086 "microcode alive notification version=%d.%d " 4087 "subtype=%x alive=%x\n", uc->major, uc->minor, 4088 uc->subtype, le32toh(uc->valid)); 4089 4090 if (le32toh(uc->valid) != 1) { 4091 device_printf(sc->sc_dev, 4092 "microcontroller initialization failed"); 4093 break; 4094 } 4095 if (uc->subtype == IWN_UCODE_INIT) { 4096 /* Save microcontroller report. */ 4097 memcpy(&sc->ucode_info, uc, sizeof (*uc)); 4098 } 4099 /* Save the address of the error log in SRAM. */ 4100 sc->errptr = le32toh(uc->errptr); 4101 break; 4102 } 4103 #ifdef IWN_DEBUG 4104 case IWN_STATE_CHANGED: 4105 { 4106 /* 4107 * State change allows hardware switch change to be 4108 * noted. However, we handle this in iwn_intr as we 4109 * get both the enable/disble intr. 4110 */ 4111 uint32_t *status = (uint32_t *)(desc + 1); 4112 DPRINTF(sc, IWN_DEBUG_INTR | IWN_DEBUG_STATE, 4113 "state changed to %x\n", 4114 le32toh(*status)); 4115 break; 4116 } 4117 case IWN_START_SCAN: 4118 { 4119 struct iwn_start_scan *scan = 4120 (struct iwn_start_scan *)(desc + 1); 4121 DPRINTF(sc, IWN_DEBUG_ANY, 4122 "%s: scanning channel %d status %x\n", 4123 __func__, scan->chan, le32toh(scan->status)); 4124 break; 4125 } 4126 #endif 4127 case IWN_STOP_SCAN: 4128 { 4129 #ifdef IWN_DEBUG 4130 struct iwn_stop_scan *scan = 4131 (struct iwn_stop_scan *)(desc + 1); 4132 DPRINTF(sc, IWN_DEBUG_STATE | IWN_DEBUG_SCAN, 4133 "scan finished nchan=%d status=%d chan=%d\n", 4134 scan->nchan, scan->status, scan->chan); 4135 #endif 4136 sc->sc_is_scanning = 0; 4137 callout_stop(&sc->scan_timeout); 4138 IWN_UNLOCK(sc); 4139 ieee80211_scan_next(vap); 4140 IWN_LOCK(sc); 4141 4142 is_stopped = (sc->sc_flags & IWN_FLAG_RUNNING) == 0; 4143 if (__predict_false(is_stopped)) 4144 return; 4145 4146 break; 4147 } 4148 case IWN5000_CALIBRATION_RESULT: 4149 iwn5000_rx_calib_results(sc, desc); 4150 break; 4151 4152 case IWN5000_CALIBRATION_DONE: 4153 sc->sc_flags |= IWN_FLAG_CALIB_DONE; 4154 wakeup(sc); 4155 break; 4156 } 4157 4158 sc->rxq.cur = (sc->rxq.cur + 1) % IWN_RX_RING_COUNT; 4159 } 4160 4161 /* Tell the firmware what we have processed. */ 4162 hw = (hw == 0) ? IWN_RX_RING_COUNT - 1 : hw - 1; 4163 IWN_WRITE(sc, IWN_FH_RX_WPTR, hw & ~7); 4164 } 4165 4166 /* 4167 * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up 4168 * from power-down sleep mode. 4169 */ 4170 static void 4171 iwn_wakeup_intr(struct iwn_softc *sc) 4172 { 4173 int qid; 4174 4175 DPRINTF(sc, IWN_DEBUG_RESET, "%s: ucode wakeup from power-down sleep\n", 4176 __func__); 4177 4178 /* Wakeup RX and TX rings. */ 4179 IWN_WRITE(sc, IWN_FH_RX_WPTR, sc->rxq.cur & ~7); 4180 for (qid = 0; qid < sc->ntxqs; qid++) { 4181 struct iwn_tx_ring *ring = &sc->txq[qid]; 4182 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | ring->cur); 4183 } 4184 } 4185 4186 static void 4187 iwn_rftoggle_task(void *arg, int npending) 4188 { 4189 struct iwn_softc *sc = arg; 4190 struct ieee80211com *ic = &sc->sc_ic; 4191 uint32_t tmp; 4192 4193 IWN_LOCK(sc); 4194 tmp = IWN_READ(sc, IWN_GP_CNTRL); 4195 IWN_UNLOCK(sc); 4196 4197 device_printf(sc->sc_dev, "RF switch: radio %s\n", 4198 (tmp & IWN_GP_CNTRL_RFKILL) ? "enabled" : "disabled"); 4199 if (!(tmp & IWN_GP_CNTRL_RFKILL)) { 4200 ieee80211_suspend_all(ic); 4201 4202 /* Enable interrupts to get RF toggle notification. */ 4203 IWN_LOCK(sc); 4204 IWN_WRITE(sc, IWN_INT, 0xffffffff); 4205 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 4206 IWN_UNLOCK(sc); 4207 } else 4208 ieee80211_resume_all(ic); 4209 } 4210 4211 /* 4212 * Dump the error log of the firmware when a firmware panic occurs. Although 4213 * we can't debug the firmware because it is neither open source nor free, it 4214 * can help us to identify certain classes of problems. 4215 */ 4216 static void 4217 iwn_fatal_intr(struct iwn_softc *sc) 4218 { 4219 struct iwn_fw_dump dump; 4220 int i; 4221 4222 IWN_LOCK_ASSERT(sc); 4223 4224 /* Force a complete recalibration on next init. */ 4225 sc->sc_flags &= ~IWN_FLAG_CALIB_DONE; 4226 4227 /* Check that the error log address is valid. */ 4228 if (sc->errptr < IWN_FW_DATA_BASE || 4229 sc->errptr + sizeof (dump) > 4230 IWN_FW_DATA_BASE + sc->fw_data_maxsz) { 4231 printf("%s: bad firmware error log address 0x%08x\n", __func__, 4232 sc->errptr); 4233 return; 4234 } 4235 if (iwn_nic_lock(sc) != 0) { 4236 printf("%s: could not read firmware error log\n", __func__); 4237 return; 4238 } 4239 /* Read firmware error log from SRAM. */ 4240 iwn_mem_read_region_4(sc, sc->errptr, (uint32_t *)&dump, 4241 sizeof (dump) / sizeof (uint32_t)); 4242 iwn_nic_unlock(sc); 4243 4244 if (dump.valid == 0) { 4245 printf("%s: firmware error log is empty\n", __func__); 4246 return; 4247 } 4248 printf("firmware error log:\n"); 4249 printf(" error type = \"%s\" (0x%08X)\n", 4250 (dump.id < nitems(iwn_fw_errmsg)) ? 4251 iwn_fw_errmsg[dump.id] : "UNKNOWN", 4252 dump.id); 4253 printf(" program counter = 0x%08X\n", dump.pc); 4254 printf(" source line = 0x%08X\n", dump.src_line); 4255 printf(" error data = 0x%08X%08X\n", 4256 dump.error_data[0], dump.error_data[1]); 4257 printf(" branch link = 0x%08X%08X\n", 4258 dump.branch_link[0], dump.branch_link[1]); 4259 printf(" interrupt link = 0x%08X%08X\n", 4260 dump.interrupt_link[0], dump.interrupt_link[1]); 4261 printf(" time = %u\n", dump.time[0]); 4262 4263 /* Dump driver status (TX and RX rings) while we're here. */ 4264 printf("driver status:\n"); 4265 for (i = 0; i < sc->ntxqs; i++) { 4266 struct iwn_tx_ring *ring = &sc->txq[i]; 4267 printf(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n", 4268 i, ring->qid, ring->cur, ring->queued); 4269 } 4270 printf(" rx ring: cur=%d\n", sc->rxq.cur); 4271 } 4272 4273 static void 4274 iwn_intr(void *arg) 4275 { 4276 struct iwn_softc *sc = arg; 4277 uint32_t r1, r2, tmp; 4278 4279 IWN_LOCK(sc); 4280 4281 /* Disable interrupts. */ 4282 IWN_WRITE(sc, IWN_INT_MASK, 0); 4283 4284 /* Read interrupts from ICT (fast) or from registers (slow). */ 4285 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4286 bus_dmamap_sync(sc->ict_dma.tag, sc->ict_dma.map, 4287 BUS_DMASYNC_POSTREAD); 4288 tmp = 0; 4289 while (sc->ict[sc->ict_cur] != 0) { 4290 tmp |= sc->ict[sc->ict_cur]; 4291 sc->ict[sc->ict_cur] = 0; /* Acknowledge. */ 4292 sc->ict_cur = (sc->ict_cur + 1) % IWN_ICT_COUNT; 4293 } 4294 tmp = le32toh(tmp); 4295 if (tmp == 0xffffffff) /* Shouldn't happen. */ 4296 tmp = 0; 4297 else if (tmp & 0xc0000) /* Workaround a HW bug. */ 4298 tmp |= 0x8000; 4299 r1 = (tmp & 0xff00) << 16 | (tmp & 0xff); 4300 r2 = 0; /* Unused. */ 4301 } else { 4302 r1 = IWN_READ(sc, IWN_INT); 4303 if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) { 4304 IWN_UNLOCK(sc); 4305 return; /* Hardware gone! */ 4306 } 4307 r2 = IWN_READ(sc, IWN_FH_INT); 4308 } 4309 4310 DPRINTF(sc, IWN_DEBUG_INTR, "interrupt reg1=0x%08x reg2=0x%08x\n" 4311 , r1, r2); 4312 4313 if (r1 == 0 && r2 == 0) 4314 goto done; /* Interrupt not for us. */ 4315 4316 /* Acknowledge interrupts. */ 4317 IWN_WRITE(sc, IWN_INT, r1); 4318 if (!(sc->sc_flags & IWN_FLAG_USE_ICT)) 4319 IWN_WRITE(sc, IWN_FH_INT, r2); 4320 4321 if (r1 & IWN_INT_RF_TOGGLED) { 4322 taskqueue_enqueue(sc->sc_tq, &sc->sc_rftoggle_task); 4323 goto done; 4324 } 4325 if (r1 & IWN_INT_CT_REACHED) { 4326 device_printf(sc->sc_dev, "%s: critical temperature reached!\n", 4327 __func__); 4328 } 4329 if (r1 & (IWN_INT_SW_ERR | IWN_INT_HW_ERR)) { 4330 device_printf(sc->sc_dev, "%s: fatal firmware error\n", 4331 __func__); 4332 #ifdef IWN_DEBUG 4333 iwn_debug_register(sc); 4334 #endif 4335 /* Dump firmware error log and stop. */ 4336 iwn_fatal_intr(sc); 4337 4338 taskqueue_enqueue(sc->sc_tq, &sc->sc_panic_task); 4339 goto done; 4340 } 4341 if ((r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX | IWN_INT_RX_PERIODIC)) || 4342 (r2 & IWN_FH_INT_RX)) { 4343 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4344 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) 4345 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_RX); 4346 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4347 IWN_INT_PERIODIC_DIS); 4348 iwn_notif_intr(sc); 4349 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) { 4350 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4351 IWN_INT_PERIODIC_ENA); 4352 } 4353 } else 4354 iwn_notif_intr(sc); 4355 } 4356 4357 if ((r1 & IWN_INT_FH_TX) || (r2 & IWN_FH_INT_TX)) { 4358 if (sc->sc_flags & IWN_FLAG_USE_ICT) 4359 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_TX); 4360 wakeup(sc); /* FH DMA transfer completed. */ 4361 } 4362 4363 if (r1 & IWN_INT_ALIVE) 4364 wakeup(sc); /* Firmware is alive. */ 4365 4366 if (r1 & IWN_INT_WAKEUP) 4367 iwn_wakeup_intr(sc); 4368 4369 done: 4370 /* Re-enable interrupts. */ 4371 if (sc->sc_flags & IWN_FLAG_RUNNING) 4372 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 4373 4374 IWN_UNLOCK(sc); 4375 } 4376 4377 /* 4378 * Update TX scheduler ring when transmitting an 802.11 frame (4965AGN and 4379 * 5000 adapters use a slightly different format). 4380 */ 4381 static void 4382 iwn4965_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4383 uint16_t len) 4384 { 4385 uint16_t *w = &sc->sched[qid * IWN4965_SCHED_COUNT + idx]; 4386 4387 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4388 4389 *w = htole16(len + 8); 4390 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4391 BUS_DMASYNC_PREWRITE); 4392 if (idx < IWN_SCHED_WINSZ) { 4393 *(w + IWN_TX_RING_COUNT) = *w; 4394 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4395 BUS_DMASYNC_PREWRITE); 4396 } 4397 } 4398 4399 static void 4400 iwn5000_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4401 uint16_t len) 4402 { 4403 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4404 4405 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4406 4407 *w = htole16(id << 12 | (len + 8)); 4408 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4409 BUS_DMASYNC_PREWRITE); 4410 if (idx < IWN_SCHED_WINSZ) { 4411 *(w + IWN_TX_RING_COUNT) = *w; 4412 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4413 BUS_DMASYNC_PREWRITE); 4414 } 4415 } 4416 4417 #ifdef notyet 4418 static void 4419 iwn5000_reset_sched(struct iwn_softc *sc, int qid, int idx) 4420 { 4421 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4422 4423 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4424 4425 *w = (*w & htole16(0xf000)) | htole16(1); 4426 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4427 BUS_DMASYNC_PREWRITE); 4428 if (idx < IWN_SCHED_WINSZ) { 4429 *(w + IWN_TX_RING_COUNT) = *w; 4430 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4431 BUS_DMASYNC_PREWRITE); 4432 } 4433 } 4434 #endif 4435 4436 /* 4437 * Check whether OFDM 11g protection will be enabled for the given rate. 4438 * 4439 * The original driver code only enabled protection for OFDM rates. 4440 * It didn't check to see whether it was operating in 11a or 11bg mode. 4441 */ 4442 static int 4443 iwn_check_rate_needs_protection(struct iwn_softc *sc, 4444 struct ieee80211vap *vap, uint8_t rate) 4445 { 4446 struct ieee80211com *ic = vap->iv_ic; 4447 4448 /* 4449 * Not in 2GHz mode? Then there's no need to enable OFDM 4450 * 11bg protection. 4451 */ 4452 if (! IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) { 4453 return (0); 4454 } 4455 4456 /* 4457 * 11bg protection not enabled? Then don't use it. 4458 */ 4459 if ((ic->ic_flags & IEEE80211_F_USEPROT) == 0) 4460 return (0); 4461 4462 /* 4463 * If it's an 11n rate - no protection. 4464 * We'll do it via a specific 11n check. 4465 */ 4466 if (rate & IEEE80211_RATE_MCS) { 4467 return (0); 4468 } 4469 4470 /* 4471 * Do a rate table lookup. If the PHY is CCK, 4472 * don't do protection. 4473 */ 4474 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_CCK) 4475 return (0); 4476 4477 /* 4478 * Yup, enable protection. 4479 */ 4480 return (1); 4481 } 4482 4483 /* 4484 * return a value between 0 and IWN_MAX_TX_RETRIES-1 as an index into 4485 * the link quality table that reflects this particular entry. 4486 */ 4487 static int 4488 iwn_tx_rate_to_linkq_offset(struct iwn_softc *sc, struct ieee80211_node *ni, 4489 uint8_t rate) 4490 { 4491 struct ieee80211_rateset *rs; 4492 int is_11n; 4493 int nr; 4494 int i; 4495 uint8_t cmp_rate; 4496 4497 /* 4498 * Figure out if we're using 11n or not here. 4499 */ 4500 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) 4501 is_11n = 1; 4502 else 4503 is_11n = 0; 4504 4505 /* 4506 * Use the correct rate table. 4507 */ 4508 if (is_11n) { 4509 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 4510 nr = ni->ni_htrates.rs_nrates; 4511 } else { 4512 rs = &ni->ni_rates; 4513 nr = rs->rs_nrates; 4514 } 4515 4516 /* 4517 * Find the relevant link quality entry in the table. 4518 */ 4519 for (i = 0; i < nr && i < IWN_MAX_TX_RETRIES - 1 ; i++) { 4520 /* 4521 * The link quality table index starts at 0 == highest 4522 * rate, so we walk the rate table backwards. 4523 */ 4524 cmp_rate = rs->rs_rates[(nr - 1) - i]; 4525 if (rate & IEEE80211_RATE_MCS) 4526 cmp_rate |= IEEE80211_RATE_MCS; 4527 4528 #if 0 4529 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: idx %d: nr=%d, rate=0x%02x, rateentry=0x%02x\n", 4530 __func__, 4531 i, 4532 nr, 4533 rate, 4534 cmp_rate); 4535 #endif 4536 4537 if (cmp_rate == rate) 4538 return (i); 4539 } 4540 4541 /* Failed? Start at the end */ 4542 return (IWN_MAX_TX_RETRIES - 1); 4543 } 4544 4545 static int 4546 iwn_tx_data(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 4547 { 4548 const struct ieee80211_txparam *tp = ni->ni_txparms; 4549 struct ieee80211vap *vap = ni->ni_vap; 4550 struct ieee80211com *ic = ni->ni_ic; 4551 struct iwn_node *wn = (void *)ni; 4552 struct iwn_tx_ring *ring; 4553 struct iwn_tx_cmd *cmd; 4554 struct iwn_cmd_data *tx; 4555 struct ieee80211_frame *wh; 4556 struct ieee80211_key *k = NULL; 4557 uint32_t flags; 4558 uint16_t qos; 4559 uint8_t tid, type; 4560 int ac, totlen, rate; 4561 4562 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4563 4564 IWN_LOCK_ASSERT(sc); 4565 4566 wh = mtod(m, struct ieee80211_frame *); 4567 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4568 4569 /* Select EDCA Access Category and TX ring for this frame. */ 4570 if (IEEE80211_QOS_HAS_SEQ(wh)) { 4571 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; 4572 tid = qos & IEEE80211_QOS_TID; 4573 } else { 4574 qos = 0; 4575 tid = 0; 4576 } 4577 4578 /* Choose a TX rate index. */ 4579 if (type == IEEE80211_FC0_TYPE_MGT || 4580 type == IEEE80211_FC0_TYPE_CTL || 4581 (m->m_flags & M_EAPOL) != 0) 4582 rate = tp->mgmtrate; 4583 else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 4584 rate = tp->mcastrate; 4585 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 4586 rate = tp->ucastrate; 4587 else { 4588 /* XXX pass pktlen */ 4589 (void) ieee80211_ratectl_rate(ni, NULL, 0); 4590 rate = ni->ni_txrate; 4591 } 4592 4593 /* 4594 * XXX TODO: Group addressed frames aren't aggregated and must 4595 * go to the normal non-aggregation queue, and have a NONQOS TID 4596 * assigned from net80211. 4597 */ 4598 4599 ac = M_WME_GETAC(m); 4600 if (m->m_flags & M_AMPDU_MPDU) { 4601 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac]; 4602 4603 if (!IEEE80211_AMPDU_RUNNING(tap)) 4604 return (EINVAL); 4605 4606 ac = *(int *)tap->txa_private; 4607 } 4608 4609 /* Encrypt the frame if need be. */ 4610 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 4611 /* Retrieve key for TX. */ 4612 k = ieee80211_crypto_encap(ni, m); 4613 if (k == NULL) { 4614 return ENOBUFS; 4615 } 4616 /* 802.11 header may have moved. */ 4617 wh = mtod(m, struct ieee80211_frame *); 4618 } 4619 totlen = m->m_pkthdr.len; 4620 4621 if (ieee80211_radiotap_active_vap(vap)) { 4622 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4623 4624 tap->wt_flags = 0; 4625 tap->wt_rate = rate; 4626 if (k != NULL) 4627 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; 4628 4629 ieee80211_radiotap_tx(vap, m); 4630 } 4631 4632 flags = 0; 4633 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4634 /* Unicast frame, check if an ACK is expected. */ 4635 if (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != 4636 IEEE80211_QOS_ACKPOLICY_NOACK) 4637 flags |= IWN_TX_NEED_ACK; 4638 } 4639 if ((wh->i_fc[0] & 4640 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 4641 (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR)) 4642 flags |= IWN_TX_IMM_BA; /* Cannot happen yet. */ 4643 4644 if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG) 4645 flags |= IWN_TX_MORE_FRAG; /* Cannot happen yet. */ 4646 4647 /* Check if frame must be protected using RTS/CTS or CTS-to-self. */ 4648 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4649 /* NB: Group frames are sent using CCK in 802.11b/g. */ 4650 if (totlen + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) { 4651 flags |= IWN_TX_NEED_RTS; 4652 } else if (iwn_check_rate_needs_protection(sc, vap, rate)) { 4653 if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 4654 flags |= IWN_TX_NEED_CTS; 4655 else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 4656 flags |= IWN_TX_NEED_RTS; 4657 } else if ((rate & IEEE80211_RATE_MCS) && 4658 (ic->ic_htprotmode == IEEE80211_PROT_RTSCTS)) { 4659 flags |= IWN_TX_NEED_RTS; 4660 } 4661 4662 /* XXX HT protection? */ 4663 4664 if (flags & (IWN_TX_NEED_RTS | IWN_TX_NEED_CTS)) { 4665 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4666 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4667 flags &= ~(IWN_TX_NEED_RTS | IWN_TX_NEED_CTS); 4668 flags |= IWN_TX_NEED_PROTECTION; 4669 } else 4670 flags |= IWN_TX_FULL_TXOP; 4671 } 4672 } 4673 4674 ring = &sc->txq[ac]; 4675 if (m->m_flags & M_AMPDU_MPDU) { 4676 uint16_t seqno = ni->ni_txseqs[tid]; 4677 4678 if (ring->queued > IWN_TX_RING_COUNT / 2 && 4679 (ring->cur + 1) % IWN_TX_RING_COUNT == ring->read) { 4680 DPRINTF(sc, IWN_DEBUG_AMPDU, "%s: no more space " 4681 "(queued %d) left in %d queue!\n", 4682 __func__, ring->queued, ac); 4683 return (ENOBUFS); 4684 } 4685 4686 /* 4687 * Queue this frame to the hardware ring that we've 4688 * negotiated AMPDU TX on. 4689 * 4690 * Note that the sequence number must match the TX slot 4691 * being used! 4692 */ 4693 if ((seqno % 256) != ring->cur) { 4694 device_printf(sc->sc_dev, 4695 "%s: m=%p: seqno (%d) (%d) != ring index (%d) !\n", 4696 __func__, 4697 m, 4698 seqno, 4699 seqno % 256, 4700 ring->cur); 4701 4702 /* XXX until D9195 will not be committed */ 4703 ni->ni_txseqs[tid] &= ~0xff; 4704 ni->ni_txseqs[tid] += ring->cur; 4705 seqno = ni->ni_txseqs[tid]; 4706 } 4707 4708 *(uint16_t *)wh->i_seq = 4709 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 4710 ni->ni_txseqs[tid]++; 4711 } 4712 4713 /* Prepare TX firmware command. */ 4714 cmd = &ring->cmd[ring->cur]; 4715 tx = (struct iwn_cmd_data *)cmd->data; 4716 4717 /* NB: No need to clear tx, all fields are reinitialized here. */ 4718 tx->scratch = 0; /* clear "scratch" area */ 4719 4720 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 4721 type != IEEE80211_FC0_TYPE_DATA) 4722 tx->id = sc->broadcast_id; 4723 else 4724 tx->id = wn->id; 4725 4726 if (type == IEEE80211_FC0_TYPE_MGT) { 4727 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4728 4729 /* Tell HW to set timestamp in probe responses. */ 4730 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4731 flags |= IWN_TX_INSERT_TSTAMP; 4732 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4733 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4734 tx->timeout = htole16(3); 4735 else 4736 tx->timeout = htole16(2); 4737 } else 4738 tx->timeout = htole16(0); 4739 4740 if (tx->id == sc->broadcast_id) { 4741 /* Group or management frame. */ 4742 tx->linkq = 0; 4743 } else { 4744 tx->linkq = iwn_tx_rate_to_linkq_offset(sc, ni, rate); 4745 flags |= IWN_TX_LINKQ; /* enable MRR */ 4746 } 4747 4748 tx->tid = tid; 4749 tx->rts_ntries = 60; 4750 tx->data_ntries = 15; 4751 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4752 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4753 tx->security = 0; 4754 tx->flags = htole32(flags); 4755 4756 return (iwn_tx_cmd(sc, m, ni, ring)); 4757 } 4758 4759 static int 4760 iwn_tx_data_raw(struct iwn_softc *sc, struct mbuf *m, 4761 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 4762 { 4763 struct ieee80211vap *vap = ni->ni_vap; 4764 struct iwn_tx_cmd *cmd; 4765 struct iwn_cmd_data *tx; 4766 struct ieee80211_frame *wh; 4767 struct iwn_tx_ring *ring; 4768 uint32_t flags; 4769 int ac, rate; 4770 uint8_t type; 4771 4772 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4773 4774 IWN_LOCK_ASSERT(sc); 4775 4776 wh = mtod(m, struct ieee80211_frame *); 4777 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4778 4779 ac = params->ibp_pri & 3; 4780 4781 /* Choose a TX rate. */ 4782 rate = params->ibp_rate0; 4783 4784 flags = 0; 4785 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 4786 flags |= IWN_TX_NEED_ACK; 4787 if (params->ibp_flags & IEEE80211_BPF_RTS) { 4788 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4789 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4790 flags &= ~IWN_TX_NEED_RTS; 4791 flags |= IWN_TX_NEED_PROTECTION; 4792 } else 4793 flags |= IWN_TX_NEED_RTS | IWN_TX_FULL_TXOP; 4794 } 4795 if (params->ibp_flags & IEEE80211_BPF_CTS) { 4796 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4797 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4798 flags &= ~IWN_TX_NEED_CTS; 4799 flags |= IWN_TX_NEED_PROTECTION; 4800 } else 4801 flags |= IWN_TX_NEED_CTS | IWN_TX_FULL_TXOP; 4802 } 4803 4804 if (ieee80211_radiotap_active_vap(vap)) { 4805 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4806 4807 tap->wt_flags = 0; 4808 tap->wt_rate = rate; 4809 4810 ieee80211_radiotap_tx(vap, m); 4811 } 4812 4813 ring = &sc->txq[ac]; 4814 cmd = &ring->cmd[ring->cur]; 4815 4816 tx = (struct iwn_cmd_data *)cmd->data; 4817 /* NB: No need to clear tx, all fields are reinitialized here. */ 4818 tx->scratch = 0; /* clear "scratch" area */ 4819 4820 if (type == IEEE80211_FC0_TYPE_MGT) { 4821 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4822 4823 /* Tell HW to set timestamp in probe responses. */ 4824 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4825 flags |= IWN_TX_INSERT_TSTAMP; 4826 4827 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4828 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4829 tx->timeout = htole16(3); 4830 else 4831 tx->timeout = htole16(2); 4832 } else 4833 tx->timeout = htole16(0); 4834 4835 tx->tid = 0; 4836 tx->id = sc->broadcast_id; 4837 tx->rts_ntries = params->ibp_try1; 4838 tx->data_ntries = params->ibp_try0; 4839 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4840 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4841 tx->security = 0; 4842 tx->flags = htole32(flags); 4843 4844 /* Group or management frame. */ 4845 tx->linkq = 0; 4846 4847 return (iwn_tx_cmd(sc, m, ni, ring)); 4848 } 4849 4850 static int 4851 iwn_tx_cmd(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni, 4852 struct iwn_tx_ring *ring) 4853 { 4854 struct iwn_ops *ops = &sc->ops; 4855 struct iwn_tx_cmd *cmd; 4856 struct iwn_cmd_data *tx; 4857 struct ieee80211_frame *wh; 4858 struct iwn_tx_desc *desc; 4859 struct iwn_tx_data *data; 4860 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER]; 4861 struct mbuf *m1; 4862 u_int hdrlen; 4863 int totlen, error, pad, nsegs = 0, i; 4864 4865 wh = mtod(m, struct ieee80211_frame *); 4866 hdrlen = ieee80211_anyhdrsize(wh); 4867 totlen = m->m_pkthdr.len; 4868 4869 desc = &ring->desc[ring->cur]; 4870 data = &ring->data[ring->cur]; 4871 4872 if (__predict_false(data->m != NULL || data->ni != NULL)) { 4873 device_printf(sc->sc_dev, "%s: ni (%p) or m (%p) for idx %d " 4874 "in queue %d is not NULL!\n", __func__, data->ni, data->m, 4875 ring->cur, ring->qid); 4876 return EIO; 4877 } 4878 4879 /* Prepare TX firmware command. */ 4880 cmd = &ring->cmd[ring->cur]; 4881 cmd->code = IWN_CMD_TX_DATA; 4882 cmd->flags = 0; 4883 cmd->qid = ring->qid; 4884 cmd->idx = ring->cur; 4885 4886 tx = (struct iwn_cmd_data *)cmd->data; 4887 tx->len = htole16(totlen); 4888 4889 /* Set physical address of "scratch area". */ 4890 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 4891 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 4892 if (hdrlen & 3) { 4893 /* First segment length must be a multiple of 4. */ 4894 tx->flags |= htole32(IWN_TX_NEED_PADDING); 4895 pad = 4 - (hdrlen & 3); 4896 } else 4897 pad = 0; 4898 4899 /* Copy 802.11 header in TX command. */ 4900 memcpy((uint8_t *)(tx + 1), wh, hdrlen); 4901 4902 /* Trim 802.11 header. */ 4903 m_adj(m, hdrlen); 4904 4905 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs, 4906 &nsegs, BUS_DMA_NOWAIT); 4907 if (error != 0) { 4908 if (error != EFBIG) { 4909 device_printf(sc->sc_dev, 4910 "%s: can't map mbuf (error %d)\n", __func__, error); 4911 return error; 4912 } 4913 /* Too many DMA segments, linearize mbuf. */ 4914 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER - 1); 4915 if (m1 == NULL) { 4916 device_printf(sc->sc_dev, 4917 "%s: could not defrag mbuf\n", __func__); 4918 return ENOBUFS; 4919 } 4920 m = m1; 4921 4922 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, 4923 segs, &nsegs, BUS_DMA_NOWAIT); 4924 if (error != 0) { 4925 /* XXX fix this */ 4926 /* 4927 * NB: Do not return error; 4928 * original mbuf does not exist anymore. 4929 */ 4930 device_printf(sc->sc_dev, 4931 "%s: can't map mbuf (error %d)\n", 4932 __func__, error); 4933 if_inc_counter(ni->ni_vap->iv_ifp, 4934 IFCOUNTER_OERRORS, 1); 4935 ieee80211_free_node(ni); 4936 m_freem(m); 4937 return 0; 4938 } 4939 } 4940 4941 data->m = m; 4942 data->ni = ni; 4943 4944 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: qid %d idx %d len %d nsegs %d " 4945 "plcp %d\n", 4946 __func__, ring->qid, ring->cur, totlen, nsegs, tx->rate); 4947 4948 /* Fill TX descriptor. */ 4949 desc->nsegs = 1; 4950 if (m->m_len != 0) 4951 desc->nsegs += nsegs; 4952 /* First DMA segment is used by the TX command. */ 4953 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 4954 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 4955 (4 + sizeof (*tx) + hdrlen + pad) << 4); 4956 /* Other DMA segments are for data payload. */ 4957 seg = &segs[0]; 4958 for (i = 1; i <= nsegs; i++) { 4959 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 4960 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 4961 seg->ds_len << 4); 4962 seg++; 4963 } 4964 4965 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 4966 bus_dmamap_sync(ring->cmd_dma.tag, ring->cmd_dma.map, 4967 BUS_DMASYNC_PREWRITE); 4968 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 4969 BUS_DMASYNC_PREWRITE); 4970 4971 /* Update TX scheduler. */ 4972 if (ring->qid >= sc->firstaggqueue) 4973 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 4974 4975 /* Kick TX ring. */ 4976 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 4977 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 4978 4979 /* Mark TX ring as full if we reach a certain threshold. */ 4980 if (++ring->queued > IWN_TX_RING_HIMARK) 4981 sc->qfullmsk |= 1 << ring->qid; 4982 4983 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 4984 4985 return 0; 4986 } 4987 4988 static void 4989 iwn_xmit_task(void *arg0, int pending) 4990 { 4991 struct iwn_softc *sc = arg0; 4992 struct ieee80211_node *ni; 4993 struct mbuf *m; 4994 int error; 4995 struct ieee80211_bpf_params p; 4996 int have_p; 4997 4998 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: called\n", __func__); 4999 5000 IWN_LOCK(sc); 5001 /* 5002 * Dequeue frames, attempt to transmit, 5003 * then disable beaconwait when we're done. 5004 */ 5005 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) { 5006 have_p = 0; 5007 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 5008 5009 /* Get xmit params if appropriate */ 5010 if (ieee80211_get_xmit_params(m, &p) == 0) 5011 have_p = 1; 5012 5013 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: m=%p, have_p=%d\n", 5014 __func__, m, have_p); 5015 5016 /* If we have xmit params, use them */ 5017 if (have_p) 5018 error = iwn_tx_data_raw(sc, m, ni, &p); 5019 else 5020 error = iwn_tx_data(sc, m, ni); 5021 5022 if (error != 0) { 5023 if_inc_counter(ni->ni_vap->iv_ifp, 5024 IFCOUNTER_OERRORS, 1); 5025 ieee80211_free_node(ni); 5026 m_freem(m); 5027 } 5028 } 5029 5030 sc->sc_beacon_wait = 0; 5031 IWN_UNLOCK(sc); 5032 } 5033 5034 /* 5035 * raw frame xmit - free node/reference if failed. 5036 */ 5037 static int 5038 iwn_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 5039 const struct ieee80211_bpf_params *params) 5040 { 5041 struct ieee80211com *ic = ni->ni_ic; 5042 struct iwn_softc *sc = ic->ic_softc; 5043 int error = 0; 5044 5045 DPRINTF(sc, IWN_DEBUG_XMIT | IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5046 5047 IWN_LOCK(sc); 5048 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0) { 5049 m_freem(m); 5050 IWN_UNLOCK(sc); 5051 return (ENETDOWN); 5052 } 5053 5054 /* queue frame if we have to */ 5055 if (sc->sc_beacon_wait) { 5056 if (iwn_xmit_queue_enqueue(sc, m) != 0) { 5057 m_freem(m); 5058 IWN_UNLOCK(sc); 5059 return (ENOBUFS); 5060 } 5061 /* Queued, so just return OK */ 5062 IWN_UNLOCK(sc); 5063 return (0); 5064 } 5065 5066 if (params == NULL) { 5067 /* 5068 * Legacy path; interpret frame contents to decide 5069 * precisely how to send the frame. 5070 */ 5071 error = iwn_tx_data(sc, m, ni); 5072 } else { 5073 /* 5074 * Caller supplied explicit parameters to use in 5075 * sending the frame. 5076 */ 5077 error = iwn_tx_data_raw(sc, m, ni, params); 5078 } 5079 if (error == 0) 5080 sc->sc_tx_timer = 5; 5081 else 5082 m_freem(m); 5083 5084 IWN_UNLOCK(sc); 5085 5086 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s: end\n",__func__); 5087 5088 return (error); 5089 } 5090 5091 /* 5092 * transmit - don't free mbuf if failed; don't free node ref if failed. 5093 */ 5094 static int 5095 iwn_transmit(struct ieee80211com *ic, struct mbuf *m) 5096 { 5097 struct iwn_softc *sc = ic->ic_softc; 5098 struct ieee80211_node *ni; 5099 int error; 5100 5101 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 5102 5103 IWN_LOCK(sc); 5104 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0 || sc->sc_beacon_wait) { 5105 IWN_UNLOCK(sc); 5106 return (ENXIO); 5107 } 5108 5109 if (sc->qfullmsk) { 5110 IWN_UNLOCK(sc); 5111 return (ENOBUFS); 5112 } 5113 5114 error = iwn_tx_data(sc, m, ni); 5115 if (!error) 5116 sc->sc_tx_timer = 5; 5117 IWN_UNLOCK(sc); 5118 return (error); 5119 } 5120 5121 static void 5122 iwn_scan_timeout(void *arg) 5123 { 5124 struct iwn_softc *sc = arg; 5125 struct ieee80211com *ic = &sc->sc_ic; 5126 5127 ic_printf(ic, "scan timeout\n"); 5128 ieee80211_restart_all(ic); 5129 } 5130 5131 static void 5132 iwn_watchdog(void *arg) 5133 { 5134 struct iwn_softc *sc = arg; 5135 struct ieee80211com *ic = &sc->sc_ic; 5136 5137 IWN_LOCK_ASSERT(sc); 5138 5139 KASSERT(sc->sc_flags & IWN_FLAG_RUNNING, ("not running")); 5140 5141 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5142 5143 if (sc->sc_tx_timer > 0) { 5144 if (--sc->sc_tx_timer == 0) { 5145 ic_printf(ic, "device timeout\n"); 5146 ieee80211_restart_all(ic); 5147 return; 5148 } 5149 } 5150 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 5151 } 5152 5153 static int 5154 iwn_cdev_open(struct cdev *dev, int flags, int type, struct thread *td) 5155 { 5156 5157 return (0); 5158 } 5159 5160 static int 5161 iwn_cdev_close(struct cdev *dev, int flags, int type, struct thread *td) 5162 { 5163 5164 return (0); 5165 } 5166 5167 static int 5168 iwn_cdev_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag, 5169 struct thread *td) 5170 { 5171 int rc; 5172 struct iwn_softc *sc = dev->si_drv1; 5173 struct iwn_ioctl_data *d; 5174 5175 rc = priv_check(td, PRIV_DRIVER); 5176 if (rc != 0) 5177 return (0); 5178 5179 switch (cmd) { 5180 case SIOCGIWNSTATS: 5181 d = (struct iwn_ioctl_data *) data; 5182 IWN_LOCK(sc); 5183 /* XXX validate permissions/memory/etc? */ 5184 rc = copyout(&sc->last_stat, d->dst_addr, sizeof(struct iwn_stats)); 5185 IWN_UNLOCK(sc); 5186 break; 5187 case SIOCZIWNSTATS: 5188 IWN_LOCK(sc); 5189 memset(&sc->last_stat, 0, sizeof(struct iwn_stats)); 5190 IWN_UNLOCK(sc); 5191 break; 5192 default: 5193 rc = EINVAL; 5194 break; 5195 } 5196 return (rc); 5197 } 5198 5199 static int 5200 iwn_ioctl(struct ieee80211com *ic, u_long cmd, void *data) 5201 { 5202 5203 return (ENOTTY); 5204 } 5205 5206 static void 5207 iwn_parent(struct ieee80211com *ic) 5208 { 5209 struct iwn_softc *sc = ic->ic_softc; 5210 struct ieee80211vap *vap; 5211 int error; 5212 5213 if (ic->ic_nrunning > 0) { 5214 error = iwn_init(sc); 5215 5216 switch (error) { 5217 case 0: 5218 ieee80211_start_all(ic); 5219 break; 5220 case 1: 5221 /* radio is disabled via RFkill switch */ 5222 taskqueue_enqueue(sc->sc_tq, &sc->sc_rftoggle_task); 5223 break; 5224 default: 5225 vap = TAILQ_FIRST(&ic->ic_vaps); 5226 if (vap != NULL) 5227 ieee80211_stop(vap); 5228 break; 5229 } 5230 } else 5231 iwn_stop(sc); 5232 } 5233 5234 /* 5235 * Send a command to the firmware. 5236 */ 5237 static int 5238 iwn_cmd(struct iwn_softc *sc, int code, const void *buf, int size, int async) 5239 { 5240 struct iwn_tx_ring *ring; 5241 struct iwn_tx_desc *desc; 5242 struct iwn_tx_data *data; 5243 struct iwn_tx_cmd *cmd; 5244 struct mbuf *m; 5245 bus_addr_t paddr; 5246 int totlen, error; 5247 int cmd_queue_num; 5248 5249 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5250 5251 if (async == 0) 5252 IWN_LOCK_ASSERT(sc); 5253 5254 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 5255 cmd_queue_num = IWN_PAN_CMD_QUEUE; 5256 else 5257 cmd_queue_num = IWN_CMD_QUEUE_NUM; 5258 5259 ring = &sc->txq[cmd_queue_num]; 5260 desc = &ring->desc[ring->cur]; 5261 data = &ring->data[ring->cur]; 5262 totlen = 4 + size; 5263 5264 if (size > sizeof cmd->data) { 5265 /* Command is too large to fit in a descriptor. */ 5266 if (totlen > MCLBYTES) 5267 return EINVAL; 5268 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); 5269 if (m == NULL) 5270 return ENOMEM; 5271 cmd = mtod(m, struct iwn_tx_cmd *); 5272 error = bus_dmamap_load(ring->data_dmat, data->map, cmd, 5273 totlen, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 5274 if (error != 0) { 5275 m_freem(m); 5276 return error; 5277 } 5278 data->m = m; 5279 } else { 5280 cmd = &ring->cmd[ring->cur]; 5281 paddr = data->cmd_paddr; 5282 } 5283 5284 cmd->code = code; 5285 cmd->flags = 0; 5286 cmd->qid = ring->qid; 5287 cmd->idx = ring->cur; 5288 memcpy(cmd->data, buf, size); 5289 5290 desc->nsegs = 1; 5291 desc->segs[0].addr = htole32(IWN_LOADDR(paddr)); 5292 desc->segs[0].len = htole16(IWN_HIADDR(paddr) | totlen << 4); 5293 5294 DPRINTF(sc, IWN_DEBUG_CMD, "%s: %s (0x%x) flags %d qid %d idx %d\n", 5295 __func__, iwn_intr_str(cmd->code), cmd->code, 5296 cmd->flags, cmd->qid, cmd->idx); 5297 5298 if (size > sizeof cmd->data) { 5299 bus_dmamap_sync(ring->data_dmat, data->map, 5300 BUS_DMASYNC_PREWRITE); 5301 } else { 5302 bus_dmamap_sync(ring->cmd_dma.tag, ring->cmd_dma.map, 5303 BUS_DMASYNC_PREWRITE); 5304 } 5305 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 5306 BUS_DMASYNC_PREWRITE); 5307 5308 /* Kick command ring. */ 5309 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 5310 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 5311 5312 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5313 5314 return async ? 0 : msleep(desc, &sc->sc_mtx, PCATCH, "iwncmd", hz); 5315 } 5316 5317 static int 5318 iwn4965_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5319 { 5320 struct iwn4965_node_info hnode; 5321 caddr_t src, dst; 5322 5323 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5324 5325 /* 5326 * We use the node structure for 5000 Series internally (it is 5327 * a superset of the one for 4965AGN). We thus copy the common 5328 * fields before sending the command. 5329 */ 5330 src = (caddr_t)node; 5331 dst = (caddr_t)&hnode; 5332 memcpy(dst, src, 48); 5333 /* Skip TSC, RX MIC and TX MIC fields from ``src''. */ 5334 memcpy(dst + 48, src + 72, 20); 5335 return iwn_cmd(sc, IWN_CMD_ADD_NODE, &hnode, sizeof hnode, async); 5336 } 5337 5338 static int 5339 iwn5000_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5340 { 5341 5342 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5343 5344 /* Direct mapping. */ 5345 return iwn_cmd(sc, IWN_CMD_ADD_NODE, node, sizeof (*node), async); 5346 } 5347 5348 static int 5349 iwn_set_link_quality(struct iwn_softc *sc, struct ieee80211_node *ni) 5350 { 5351 struct iwn_node *wn = (void *)ni; 5352 struct ieee80211_rateset *rs; 5353 struct iwn_cmd_link_quality linkq; 5354 int i, rate, txrate; 5355 int is_11n; 5356 5357 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5358 5359 memset(&linkq, 0, sizeof linkq); 5360 linkq.id = wn->id; 5361 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5362 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5363 5364 linkq.ampdu_max = 32; /* XXX negotiated? */ 5365 linkq.ampdu_threshold = 3; 5366 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5367 5368 DPRINTF(sc, IWN_DEBUG_XMIT, 5369 "%s: 1stream antenna=0x%02x, 2stream antenna=0x%02x, ntxstreams=%d\n", 5370 __func__, 5371 linkq.antmsk_1stream, 5372 linkq.antmsk_2stream, 5373 sc->ntxchains); 5374 5375 /* 5376 * Are we using 11n rates? Ensure the channel is 5377 * 11n _and_ we have some 11n rates, or don't 5378 * try. 5379 */ 5380 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) { 5381 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 5382 is_11n = 1; 5383 } else { 5384 rs = &ni->ni_rates; 5385 is_11n = 0; 5386 } 5387 5388 /* Start at highest available bit-rate. */ 5389 /* 5390 * XXX this is all very dirty! 5391 */ 5392 if (is_11n) 5393 txrate = ni->ni_htrates.rs_nrates - 1; 5394 else 5395 txrate = rs->rs_nrates - 1; 5396 for (i = 0; i < IWN_MAX_TX_RETRIES; i++) { 5397 uint32_t plcp; 5398 5399 /* 5400 * XXX TODO: ensure the last two slots are the two lowest 5401 * rate entries, just for now. 5402 */ 5403 if (i == 14 || i == 15) 5404 txrate = 0; 5405 5406 if (is_11n) 5407 rate = IEEE80211_RATE_MCS | rs->rs_rates[txrate]; 5408 else 5409 rate = IEEE80211_RV(rs->rs_rates[txrate]); 5410 5411 /* Do rate -> PLCP config mapping */ 5412 plcp = iwn_rate_to_plcp(sc, ni, rate); 5413 linkq.retry[i] = plcp; 5414 DPRINTF(sc, IWN_DEBUG_XMIT, 5415 "%s: i=%d, txrate=%d, rate=0x%02x, plcp=0x%08x\n", 5416 __func__, 5417 i, 5418 txrate, 5419 rate, 5420 le32toh(plcp)); 5421 5422 /* 5423 * The mimo field is an index into the table which 5424 * indicates the first index where it and subsequent entries 5425 * will not be using MIMO. 5426 * 5427 * Since we're filling linkq from 0..15 and we're filling 5428 * from the highest MCS rates to the lowest rates, if we 5429 * _are_ doing a dual-stream rate, set mimo to idx+1 (ie, 5430 * the next entry.) That way if the next entry is a non-MIMO 5431 * entry, we're already pointing at it. 5432 */ 5433 if ((le32toh(plcp) & IWN_RFLAG_MCS) && 5434 IEEE80211_RV(le32toh(plcp)) > 7) 5435 linkq.mimo = i + 1; 5436 5437 /* Next retry at immediate lower bit-rate. */ 5438 if (txrate > 0) 5439 txrate--; 5440 } 5441 /* 5442 * If we reached the end of the list and indeed we hit 5443 * all MIMO rates (eg 5300 doing MCS23-15) then yes, 5444 * set mimo to 15. Setting it to 16 panics the firmware. 5445 */ 5446 if (linkq.mimo > 15) 5447 linkq.mimo = 15; 5448 5449 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: mimo = %d\n", __func__, linkq.mimo); 5450 5451 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5452 5453 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, 1); 5454 } 5455 5456 /* 5457 * Broadcast node is used to send group-addressed and management frames. 5458 */ 5459 static int 5460 iwn_add_broadcast_node(struct iwn_softc *sc, int async) 5461 { 5462 struct iwn_ops *ops = &sc->ops; 5463 struct ieee80211com *ic = &sc->sc_ic; 5464 struct iwn_node_info node; 5465 struct iwn_cmd_link_quality linkq; 5466 uint8_t txant; 5467 int i, error; 5468 5469 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5470 5471 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5472 5473 memset(&node, 0, sizeof node); 5474 IEEE80211_ADDR_COPY(node.macaddr, ieee80211broadcastaddr); 5475 node.id = sc->broadcast_id; 5476 DPRINTF(sc, IWN_DEBUG_RESET, "%s: adding broadcast node\n", __func__); 5477 if ((error = ops->add_node(sc, &node, async)) != 0) 5478 return error; 5479 5480 /* Use the first valid TX antenna. */ 5481 txant = IWN_LSB(sc->txchainmask); 5482 5483 memset(&linkq, 0, sizeof linkq); 5484 linkq.id = sc->broadcast_id; 5485 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5486 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5487 linkq.ampdu_max = 64; 5488 linkq.ampdu_threshold = 3; 5489 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5490 5491 /* Use lowest mandatory bit-rate. */ 5492 /* XXX rate table lookup? */ 5493 if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) 5494 linkq.retry[0] = htole32(0xd); 5495 else 5496 linkq.retry[0] = htole32(10 | IWN_RFLAG_CCK); 5497 linkq.retry[0] |= htole32(IWN_RFLAG_ANT(txant)); 5498 /* Use same bit-rate for all TX retries. */ 5499 for (i = 1; i < IWN_MAX_TX_RETRIES; i++) { 5500 linkq.retry[i] = linkq.retry[0]; 5501 } 5502 5503 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5504 5505 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, async); 5506 } 5507 5508 static int 5509 iwn_updateedca(struct ieee80211com *ic) 5510 { 5511 #define IWN_EXP2(x) ((1 << (x)) - 1) /* CWmin = 2^ECWmin - 1 */ 5512 struct iwn_softc *sc = ic->ic_softc; 5513 struct iwn_edca_params cmd; 5514 struct chanAccParams chp; 5515 int aci; 5516 5517 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5518 5519 ieee80211_wme_ic_getparams(ic, &chp); 5520 5521 memset(&cmd, 0, sizeof cmd); 5522 cmd.flags = htole32(IWN_EDCA_UPDATE); 5523 5524 IEEE80211_LOCK(ic); 5525 for (aci = 0; aci < WME_NUM_AC; aci++) { 5526 const struct wmeParams *ac = &chp.cap_wmeParams[aci]; 5527 cmd.ac[aci].aifsn = ac->wmep_aifsn; 5528 cmd.ac[aci].cwmin = htole16(IWN_EXP2(ac->wmep_logcwmin)); 5529 cmd.ac[aci].cwmax = htole16(IWN_EXP2(ac->wmep_logcwmax)); 5530 cmd.ac[aci].txoplimit = 5531 htole16(IEEE80211_TXOP_TO_US(ac->wmep_txopLimit)); 5532 } 5533 IEEE80211_UNLOCK(ic); 5534 5535 IWN_LOCK(sc); 5536 (void)iwn_cmd(sc, IWN_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1); 5537 IWN_UNLOCK(sc); 5538 5539 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5540 5541 return 0; 5542 #undef IWN_EXP2 5543 } 5544 5545 static void 5546 iwn_set_promisc(struct iwn_softc *sc) 5547 { 5548 struct ieee80211com *ic = &sc->sc_ic; 5549 uint32_t promisc_filter; 5550 5551 promisc_filter = IWN_FILTER_CTL | IWN_FILTER_PROMISC; 5552 if (ic->ic_promisc > 0 || ic->ic_opmode == IEEE80211_M_MONITOR) 5553 sc->rxon->filter |= htole32(promisc_filter); 5554 else 5555 sc->rxon->filter &= ~htole32(promisc_filter); 5556 } 5557 5558 static void 5559 iwn_update_promisc(struct ieee80211com *ic) 5560 { 5561 struct iwn_softc *sc = ic->ic_softc; 5562 int error; 5563 5564 if (ic->ic_opmode == IEEE80211_M_MONITOR) 5565 return; /* nothing to do */ 5566 5567 IWN_LOCK(sc); 5568 if (!(sc->sc_flags & IWN_FLAG_RUNNING)) { 5569 IWN_UNLOCK(sc); 5570 return; 5571 } 5572 5573 iwn_set_promisc(sc); 5574 if ((error = iwn_send_rxon(sc, 1, 1)) != 0) { 5575 device_printf(sc->sc_dev, 5576 "%s: could not send RXON, error %d\n", 5577 __func__, error); 5578 } 5579 IWN_UNLOCK(sc); 5580 } 5581 5582 static void 5583 iwn_update_mcast(struct ieee80211com *ic) 5584 { 5585 /* Ignore */ 5586 } 5587 5588 static void 5589 iwn_set_led(struct iwn_softc *sc, uint8_t which, uint8_t off, uint8_t on) 5590 { 5591 struct iwn_cmd_led led; 5592 5593 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5594 5595 #if 0 5596 /* XXX don't set LEDs during scan? */ 5597 if (sc->sc_is_scanning) 5598 return; 5599 #endif 5600 5601 /* Clear microcode LED ownership. */ 5602 IWN_CLRBITS(sc, IWN_LED, IWN_LED_BSM_CTRL); 5603 5604 led.which = which; 5605 led.unit = htole32(10000); /* on/off in unit of 100ms */ 5606 led.off = off; 5607 led.on = on; 5608 (void)iwn_cmd(sc, IWN_CMD_SET_LED, &led, sizeof led, 1); 5609 } 5610 5611 /* 5612 * Set the critical temperature at which the firmware will stop the radio 5613 * and notify us. 5614 */ 5615 static int 5616 iwn_set_critical_temp(struct iwn_softc *sc) 5617 { 5618 struct iwn_critical_temp crit; 5619 int32_t temp; 5620 5621 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5622 5623 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CTEMP_STOP_RF); 5624 5625 if (sc->hw_type == IWN_HW_REV_TYPE_5150) 5626 temp = (IWN_CTOK(110) - sc->temp_off) * -5; 5627 else if (sc->hw_type == IWN_HW_REV_TYPE_4965) 5628 temp = IWN_CTOK(110); 5629 else 5630 temp = 110; 5631 memset(&crit, 0, sizeof crit); 5632 crit.tempR = htole32(temp); 5633 DPRINTF(sc, IWN_DEBUG_RESET, "setting critical temp to %d\n", temp); 5634 return iwn_cmd(sc, IWN_CMD_SET_CRITICAL_TEMP, &crit, sizeof crit, 0); 5635 } 5636 5637 static int 5638 iwn_set_timing(struct iwn_softc *sc, struct ieee80211_node *ni) 5639 { 5640 struct iwn_cmd_timing cmd; 5641 uint64_t val, mod; 5642 5643 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5644 5645 memset(&cmd, 0, sizeof cmd); 5646 memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t)); 5647 cmd.bintval = htole16(ni->ni_intval); 5648 cmd.lintval = htole16(10); 5649 5650 /* Compute remaining time until next beacon. */ 5651 val = (uint64_t)ni->ni_intval * IEEE80211_DUR_TU; 5652 mod = le64toh(cmd.tstamp) % val; 5653 cmd.binitval = htole32((uint32_t)(val - mod)); 5654 5655 DPRINTF(sc, IWN_DEBUG_RESET, "timing bintval=%u tstamp=%ju, init=%u\n", 5656 ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod)); 5657 5658 return iwn_cmd(sc, IWN_CMD_TIMING, &cmd, sizeof cmd, 1); 5659 } 5660 5661 static void 5662 iwn4965_power_calibration(struct iwn_softc *sc, int temp) 5663 { 5664 5665 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5666 5667 /* Adjust TX power if need be (delta >= 3 degC). */ 5668 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d->%d\n", 5669 __func__, sc->temp, temp); 5670 if (abs(temp - sc->temp) >= 3) { 5671 /* Record temperature of last calibration. */ 5672 sc->temp = temp; 5673 (void)iwn4965_set_txpower(sc, 1); 5674 } 5675 } 5676 5677 /* 5678 * Set TX power for current channel (each rate has its own power settings). 5679 * This function takes into account the regulatory information from EEPROM, 5680 * the current temperature and the current voltage. 5681 */ 5682 static int 5683 iwn4965_set_txpower(struct iwn_softc *sc, int async) 5684 { 5685 /* Fixed-point arithmetic division using a n-bit fractional part. */ 5686 #define fdivround(a, b, n) \ 5687 ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n)) 5688 /* Linear interpolation. */ 5689 #define interpolate(x, x1, y1, x2, y2, n) \ 5690 ((y1) + fdivround(((int)(x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n)) 5691 5692 static const int tdiv[IWN_NATTEN_GROUPS] = { 9, 8, 8, 8, 6 }; 5693 struct iwn_ucode_info *uc = &sc->ucode_info; 5694 struct iwn4965_cmd_txpower cmd; 5695 struct iwn4965_eeprom_chan_samples *chans; 5696 const uint8_t *rf_gain, *dsp_gain; 5697 int32_t vdiff, tdiff; 5698 int i, is_chan_5ghz, c, grp, maxpwr; 5699 uint8_t chan; 5700 5701 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5702 /* Retrieve current channel from last RXON. */ 5703 chan = sc->rxon->chan; 5704 is_chan_5ghz = (sc->rxon->flags & htole32(IWN_RXON_24GHZ)) == 0; 5705 DPRINTF(sc, IWN_DEBUG_RESET, "setting TX power for channel %d\n", 5706 chan); 5707 5708 memset(&cmd, 0, sizeof cmd); 5709 cmd.band = is_chan_5ghz ? 0 : 1; 5710 cmd.chan = chan; 5711 5712 if (is_chan_5ghz) { 5713 maxpwr = sc->maxpwr5GHz; 5714 rf_gain = iwn4965_rf_gain_5ghz; 5715 dsp_gain = iwn4965_dsp_gain_5ghz; 5716 } else { 5717 maxpwr = sc->maxpwr2GHz; 5718 rf_gain = iwn4965_rf_gain_2ghz; 5719 dsp_gain = iwn4965_dsp_gain_2ghz; 5720 } 5721 5722 /* Compute voltage compensation. */ 5723 vdiff = ((int32_t)le32toh(uc->volt) - sc->eeprom_voltage) / 7; 5724 if (vdiff > 0) 5725 vdiff *= 2; 5726 if (abs(vdiff) > 2) 5727 vdiff = 0; 5728 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5729 "%s: voltage compensation=%d (UCODE=%d, EEPROM=%d)\n", 5730 __func__, vdiff, le32toh(uc->volt), sc->eeprom_voltage); 5731 5732 /* Get channel attenuation group. */ 5733 if (chan <= 20) /* 1-20 */ 5734 grp = 4; 5735 else if (chan <= 43) /* 34-43 */ 5736 grp = 0; 5737 else if (chan <= 70) /* 44-70 */ 5738 grp = 1; 5739 else if (chan <= 124) /* 71-124 */ 5740 grp = 2; 5741 else /* 125-200 */ 5742 grp = 3; 5743 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5744 "%s: chan %d, attenuation group=%d\n", __func__, chan, grp); 5745 5746 /* Get channel sub-band. */ 5747 for (i = 0; i < IWN_NBANDS; i++) 5748 if (sc->bands[i].lo != 0 && 5749 sc->bands[i].lo <= chan && chan <= sc->bands[i].hi) 5750 break; 5751 if (i == IWN_NBANDS) /* Can't happen in real-life. */ 5752 return EINVAL; 5753 chans = sc->bands[i].chans; 5754 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5755 "%s: chan %d sub-band=%d\n", __func__, chan, i); 5756 5757 for (c = 0; c < 2; c++) { 5758 uint8_t power, gain, temp; 5759 int maxchpwr, pwr, ridx, idx; 5760 5761 power = interpolate(chan, 5762 chans[0].num, chans[0].samples[c][1].power, 5763 chans[1].num, chans[1].samples[c][1].power, 1); 5764 gain = interpolate(chan, 5765 chans[0].num, chans[0].samples[c][1].gain, 5766 chans[1].num, chans[1].samples[c][1].gain, 1); 5767 temp = interpolate(chan, 5768 chans[0].num, chans[0].samples[c][1].temp, 5769 chans[1].num, chans[1].samples[c][1].temp, 1); 5770 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5771 "%s: Tx chain %d: power=%d gain=%d temp=%d\n", 5772 __func__, c, power, gain, temp); 5773 5774 /* Compute temperature compensation. */ 5775 tdiff = ((sc->temp - temp) * 2) / tdiv[grp]; 5776 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5777 "%s: temperature compensation=%d (current=%d, EEPROM=%d)\n", 5778 __func__, tdiff, sc->temp, temp); 5779 5780 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) { 5781 /* Convert dBm to half-dBm. */ 5782 maxchpwr = sc->maxpwr[chan] * 2; 5783 if ((ridx / 8) & 1) 5784 maxchpwr -= 6; /* MIMO 2T: -3dB */ 5785 5786 pwr = maxpwr; 5787 5788 /* Adjust TX power based on rate. */ 5789 if ((ridx % 8) == 5) 5790 pwr -= 15; /* OFDM48: -7.5dB */ 5791 else if ((ridx % 8) == 6) 5792 pwr -= 17; /* OFDM54: -8.5dB */ 5793 else if ((ridx % 8) == 7) 5794 pwr -= 20; /* OFDM60: -10dB */ 5795 else 5796 pwr -= 10; /* Others: -5dB */ 5797 5798 /* Do not exceed channel max TX power. */ 5799 if (pwr > maxchpwr) 5800 pwr = maxchpwr; 5801 5802 idx = gain - (pwr - power) - tdiff - vdiff; 5803 if ((ridx / 8) & 1) /* MIMO */ 5804 idx += (int32_t)le32toh(uc->atten[grp][c]); 5805 5806 if (cmd.band == 0) 5807 idx += 9; /* 5GHz */ 5808 if (ridx == IWN_RIDX_MAX) 5809 idx += 5; /* CCK */ 5810 5811 /* Make sure idx stays in a valid range. */ 5812 if (idx < 0) 5813 idx = 0; 5814 else if (idx > IWN4965_MAX_PWR_INDEX) 5815 idx = IWN4965_MAX_PWR_INDEX; 5816 5817 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5818 "%s: Tx chain %d, rate idx %d: power=%d\n", 5819 __func__, c, ridx, idx); 5820 cmd.power[ridx].rf_gain[c] = rf_gain[idx]; 5821 cmd.power[ridx].dsp_gain[c] = dsp_gain[idx]; 5822 } 5823 } 5824 5825 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5826 "%s: set tx power for chan %d\n", __func__, chan); 5827 return iwn_cmd(sc, IWN_CMD_TXPOWER, &cmd, sizeof cmd, async); 5828 5829 #undef interpolate 5830 #undef fdivround 5831 } 5832 5833 static int 5834 iwn5000_set_txpower(struct iwn_softc *sc, int async) 5835 { 5836 struct iwn5000_cmd_txpower cmd; 5837 int cmdid; 5838 5839 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5840 5841 /* 5842 * TX power calibration is handled automatically by the firmware 5843 * for 5000 Series. 5844 */ 5845 memset(&cmd, 0, sizeof cmd); 5846 cmd.global_limit = 2 * IWN5000_TXPOWER_MAX_DBM; /* 16 dBm */ 5847 cmd.flags = IWN5000_TXPOWER_NO_CLOSED; 5848 cmd.srv_limit = IWN5000_TXPOWER_AUTO; 5849 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5850 "%s: setting TX power; rev=%d\n", 5851 __func__, 5852 IWN_UCODE_API(sc->ucode_rev)); 5853 if (IWN_UCODE_API(sc->ucode_rev) == 1) 5854 cmdid = IWN_CMD_TXPOWER_DBM_V1; 5855 else 5856 cmdid = IWN_CMD_TXPOWER_DBM; 5857 return iwn_cmd(sc, cmdid, &cmd, sizeof cmd, async); 5858 } 5859 5860 /* 5861 * Retrieve the maximum RSSI (in dBm) among receivers. 5862 */ 5863 static int 5864 iwn4965_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5865 { 5866 struct iwn4965_rx_phystat *phy = (void *)stat->phybuf; 5867 uint8_t mask, agc; 5868 int rssi; 5869 5870 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5871 5872 mask = (le16toh(phy->antenna) >> 4) & IWN_ANT_ABC; 5873 agc = (le16toh(phy->agc) >> 7) & 0x7f; 5874 5875 rssi = 0; 5876 if (mask & IWN_ANT_A) 5877 rssi = MAX(rssi, phy->rssi[0]); 5878 if (mask & IWN_ANT_B) 5879 rssi = MAX(rssi, phy->rssi[2]); 5880 if (mask & IWN_ANT_C) 5881 rssi = MAX(rssi, phy->rssi[4]); 5882 5883 DPRINTF(sc, IWN_DEBUG_RECV, 5884 "%s: agc %d mask 0x%x rssi %d %d %d result %d\n", __func__, agc, 5885 mask, phy->rssi[0], phy->rssi[2], phy->rssi[4], 5886 rssi - agc - IWN_RSSI_TO_DBM); 5887 return rssi - agc - IWN_RSSI_TO_DBM; 5888 } 5889 5890 static int 5891 iwn5000_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5892 { 5893 struct iwn5000_rx_phystat *phy = (void *)stat->phybuf; 5894 uint8_t agc; 5895 int rssi; 5896 5897 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5898 5899 agc = (le32toh(phy->agc) >> 9) & 0x7f; 5900 5901 rssi = MAX(le16toh(phy->rssi[0]) & 0xff, 5902 le16toh(phy->rssi[1]) & 0xff); 5903 rssi = MAX(le16toh(phy->rssi[2]) & 0xff, rssi); 5904 5905 DPRINTF(sc, IWN_DEBUG_RECV, 5906 "%s: agc %d rssi %d %d %d result %d\n", __func__, agc, 5907 phy->rssi[0], phy->rssi[1], phy->rssi[2], 5908 rssi - agc - IWN_RSSI_TO_DBM); 5909 return rssi - agc - IWN_RSSI_TO_DBM; 5910 } 5911 5912 /* 5913 * Retrieve the average noise (in dBm) among receivers. 5914 */ 5915 static int 5916 iwn_get_noise(const struct iwn_rx_general_stats *stats) 5917 { 5918 int i, total, nbant, noise; 5919 5920 total = nbant = 0; 5921 for (i = 0; i < 3; i++) { 5922 if ((noise = le32toh(stats->noise[i]) & 0xff) == 0) 5923 continue; 5924 total += noise; 5925 nbant++; 5926 } 5927 /* There should be at least one antenna but check anyway. */ 5928 return (nbant == 0) ? -127 : (total / nbant) - 107; 5929 } 5930 5931 /* 5932 * Compute temperature (in degC) from last received statistics. 5933 */ 5934 static int 5935 iwn4965_get_temperature(struct iwn_softc *sc) 5936 { 5937 struct iwn_ucode_info *uc = &sc->ucode_info; 5938 int32_t r1, r2, r3, r4, temp; 5939 5940 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5941 5942 r1 = le32toh(uc->temp[0].chan20MHz); 5943 r2 = le32toh(uc->temp[1].chan20MHz); 5944 r3 = le32toh(uc->temp[2].chan20MHz); 5945 r4 = le32toh(sc->rawtemp); 5946 5947 if (r1 == r3) /* Prevents division by 0 (should not happen). */ 5948 return 0; 5949 5950 /* Sign-extend 23-bit R4 value to 32-bit. */ 5951 r4 = ((r4 & 0xffffff) ^ 0x800000) - 0x800000; 5952 /* Compute temperature in Kelvin. */ 5953 temp = (259 * (r4 - r2)) / (r3 - r1); 5954 temp = (temp * 97) / 100 + 8; 5955 5956 DPRINTF(sc, IWN_DEBUG_ANY, "temperature %dK/%dC\n", temp, 5957 IWN_KTOC(temp)); 5958 return IWN_KTOC(temp); 5959 } 5960 5961 static int 5962 iwn5000_get_temperature(struct iwn_softc *sc) 5963 { 5964 int32_t temp; 5965 5966 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5967 5968 /* 5969 * Temperature is not used by the driver for 5000 Series because 5970 * TX power calibration is handled by firmware. 5971 */ 5972 temp = le32toh(sc->rawtemp); 5973 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 5974 temp = (temp / -5) + sc->temp_off; 5975 temp = IWN_KTOC(temp); 5976 } 5977 return temp; 5978 } 5979 5980 /* 5981 * Initialize sensitivity calibration state machine. 5982 */ 5983 static int 5984 iwn_init_sensitivity(struct iwn_softc *sc) 5985 { 5986 struct iwn_ops *ops = &sc->ops; 5987 struct iwn_calib_state *calib = &sc->calib; 5988 uint32_t flags; 5989 int error; 5990 5991 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5992 5993 /* Reset calibration state machine. */ 5994 memset(calib, 0, sizeof (*calib)); 5995 calib->state = IWN_CALIB_STATE_INIT; 5996 calib->cck_state = IWN_CCK_STATE_HIFA; 5997 /* Set initial correlation values. */ 5998 calib->ofdm_x1 = sc->limits->min_ofdm_x1; 5999 calib->ofdm_mrc_x1 = sc->limits->min_ofdm_mrc_x1; 6000 calib->ofdm_x4 = sc->limits->min_ofdm_x4; 6001 calib->ofdm_mrc_x4 = sc->limits->min_ofdm_mrc_x4; 6002 calib->cck_x4 = 125; 6003 calib->cck_mrc_x4 = sc->limits->min_cck_mrc_x4; 6004 calib->energy_cck = sc->limits->energy_cck; 6005 6006 /* Write initial sensitivity. */ 6007 if ((error = iwn_send_sensitivity(sc)) != 0) 6008 return error; 6009 6010 /* Write initial gains. */ 6011 if ((error = ops->init_gains(sc)) != 0) 6012 return error; 6013 6014 /* Request statistics at each beacon interval. */ 6015 flags = 0; 6016 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending request for statistics\n", 6017 __func__); 6018 return iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, sizeof flags, 1); 6019 } 6020 6021 /* 6022 * Collect noise and RSSI statistics for the first 20 beacons received 6023 * after association and use them to determine connected antennas and 6024 * to set differential gains. 6025 */ 6026 static void 6027 iwn_collect_noise(struct iwn_softc *sc, 6028 const struct iwn_rx_general_stats *stats) 6029 { 6030 struct iwn_ops *ops = &sc->ops; 6031 struct iwn_calib_state *calib = &sc->calib; 6032 struct ieee80211com *ic = &sc->sc_ic; 6033 uint32_t val; 6034 int i; 6035 6036 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6037 6038 /* Accumulate RSSI and noise for all 3 antennas. */ 6039 for (i = 0; i < 3; i++) { 6040 calib->rssi[i] += le32toh(stats->rssi[i]) & 0xff; 6041 calib->noise[i] += le32toh(stats->noise[i]) & 0xff; 6042 } 6043 /* NB: We update differential gains only once after 20 beacons. */ 6044 if (++calib->nbeacons < 20) 6045 return; 6046 6047 /* Determine highest average RSSI. */ 6048 val = MAX(calib->rssi[0], calib->rssi[1]); 6049 val = MAX(calib->rssi[2], val); 6050 6051 /* Determine which antennas are connected. */ 6052 sc->chainmask = sc->rxchainmask; 6053 for (i = 0; i < 3; i++) 6054 if (val - calib->rssi[i] > 15 * 20) 6055 sc->chainmask &= ~(1 << i); 6056 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 6057 "%s: RX chains mask: theoretical=0x%x, actual=0x%x\n", 6058 __func__, sc->rxchainmask, sc->chainmask); 6059 6060 /* If none of the TX antennas are connected, keep at least one. */ 6061 if ((sc->chainmask & sc->txchainmask) == 0) 6062 sc->chainmask |= IWN_LSB(sc->txchainmask); 6063 6064 (void)ops->set_gains(sc); 6065 calib->state = IWN_CALIB_STATE_RUN; 6066 6067 #ifdef notyet 6068 /* XXX Disable RX chains with no antennas connected. */ 6069 sc->rxon->rxchain = htole16(IWN_RXCHAIN_SEL(sc->chainmask)); 6070 if (sc->sc_is_scanning) 6071 device_printf(sc->sc_dev, 6072 "%s: is_scanning set, before RXON\n", 6073 __func__); 6074 (void)iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 6075 #endif 6076 6077 /* Enable power-saving mode if requested by user. */ 6078 if (ic->ic_flags & IEEE80211_F_PMGTON) 6079 (void)iwn_set_pslevel(sc, 0, 3, 1); 6080 6081 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6082 6083 } 6084 6085 static int 6086 iwn4965_init_gains(struct iwn_softc *sc) 6087 { 6088 struct iwn_phy_calib_gain cmd; 6089 6090 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6091 6092 memset(&cmd, 0, sizeof cmd); 6093 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 6094 /* Differential gains initially set to 0 for all 3 antennas. */ 6095 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6096 "%s: setting initial differential gains\n", __func__); 6097 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6098 } 6099 6100 static int 6101 iwn5000_init_gains(struct iwn_softc *sc) 6102 { 6103 struct iwn_phy_calib cmd; 6104 6105 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6106 6107 memset(&cmd, 0, sizeof cmd); 6108 cmd.code = sc->reset_noise_gain; 6109 cmd.ngroups = 1; 6110 cmd.isvalid = 1; 6111 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6112 "%s: setting initial differential gains\n", __func__); 6113 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6114 } 6115 6116 static int 6117 iwn4965_set_gains(struct iwn_softc *sc) 6118 { 6119 struct iwn_calib_state *calib = &sc->calib; 6120 struct iwn_phy_calib_gain cmd; 6121 int i, delta, noise; 6122 6123 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6124 6125 /* Get minimal noise among connected antennas. */ 6126 noise = INT_MAX; /* NB: There's at least one antenna. */ 6127 for (i = 0; i < 3; i++) 6128 if (sc->chainmask & (1 << i)) 6129 noise = MIN(calib->noise[i], noise); 6130 6131 memset(&cmd, 0, sizeof cmd); 6132 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 6133 /* Set differential gains for connected antennas. */ 6134 for (i = 0; i < 3; i++) { 6135 if (sc->chainmask & (1 << i)) { 6136 /* Compute attenuation (in unit of 1.5dB). */ 6137 delta = (noise - (int32_t)calib->noise[i]) / 30; 6138 /* NB: delta <= 0 */ 6139 /* Limit to [-4.5dB,0]. */ 6140 cmd.gain[i] = MIN(abs(delta), 3); 6141 if (delta < 0) 6142 cmd.gain[i] |= 1 << 2; /* sign bit */ 6143 } 6144 } 6145 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6146 "setting differential gains Ant A/B/C: %x/%x/%x (%x)\n", 6147 cmd.gain[0], cmd.gain[1], cmd.gain[2], sc->chainmask); 6148 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6149 } 6150 6151 static int 6152 iwn5000_set_gains(struct iwn_softc *sc) 6153 { 6154 struct iwn_calib_state *calib = &sc->calib; 6155 struct iwn_phy_calib_gain cmd; 6156 int i, ant, div, delta; 6157 6158 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 6159 6160 /* We collected 20 beacons and !=6050 need a 1.5 factor. */ 6161 div = (sc->hw_type == IWN_HW_REV_TYPE_6050) ? 20 : 30; 6162 6163 memset(&cmd, 0, sizeof cmd); 6164 cmd.code = sc->noise_gain; 6165 cmd.ngroups = 1; 6166 cmd.isvalid = 1; 6167 /* Get first available RX antenna as referential. */ 6168 ant = IWN_LSB(sc->rxchainmask); 6169 /* Set differential gains for other antennas. */ 6170 for (i = ant + 1; i < 3; i++) { 6171 if (sc->chainmask & (1 << i)) { 6172 /* The delta is relative to antenna "ant". */ 6173 delta = ((int32_t)calib->noise[ant] - 6174 (int32_t)calib->noise[i]) / div; 6175 /* Limit to [-4.5dB,+4.5dB]. */ 6176 cmd.gain[i - 1] = MIN(abs(delta), 3); 6177 if (delta < 0) 6178 cmd.gain[i - 1] |= 1 << 2; /* sign bit */ 6179 } 6180 } 6181 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 6182 "setting differential gains Ant B/C: %x/%x (%x)\n", 6183 cmd.gain[0], cmd.gain[1], sc->chainmask); 6184 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 6185 } 6186 6187 /* 6188 * Tune RF RX sensitivity based on the number of false alarms detected 6189 * during the last beacon period. 6190 */ 6191 static void 6192 iwn_tune_sensitivity(struct iwn_softc *sc, const struct iwn_rx_stats *stats) 6193 { 6194 #define inc(val, inc, max) \ 6195 if ((val) < (max)) { \ 6196 if ((val) < (max) - (inc)) \ 6197 (val) += (inc); \ 6198 else \ 6199 (val) = (max); \ 6200 needs_update = 1; \ 6201 } 6202 #define dec(val, dec, min) \ 6203 if ((val) > (min)) { \ 6204 if ((val) > (min) + (dec)) \ 6205 (val) -= (dec); \ 6206 else \ 6207 (val) = (min); \ 6208 needs_update = 1; \ 6209 } 6210 6211 const struct iwn_sensitivity_limits *limits = sc->limits; 6212 struct iwn_calib_state *calib = &sc->calib; 6213 uint32_t val, rxena, fa; 6214 uint32_t energy[3], energy_min; 6215 uint8_t noise[3], noise_ref; 6216 int i, needs_update = 0; 6217 6218 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6219 6220 /* Check that we've been enabled long enough. */ 6221 if ((rxena = le32toh(stats->general.load)) == 0){ 6222 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end not so long\n", __func__); 6223 return; 6224 } 6225 6226 /* Compute number of false alarms since last call for OFDM. */ 6227 fa = le32toh(stats->ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6228 fa += le32toh(stats->ofdm.fa) - calib->fa_ofdm; 6229 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6230 6231 if (fa > 50 * rxena) { 6232 /* High false alarm count, decrease sensitivity. */ 6233 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6234 "%s: OFDM high false alarm count: %u\n", __func__, fa); 6235 inc(calib->ofdm_x1, 1, limits->max_ofdm_x1); 6236 inc(calib->ofdm_mrc_x1, 1, limits->max_ofdm_mrc_x1); 6237 inc(calib->ofdm_x4, 1, limits->max_ofdm_x4); 6238 inc(calib->ofdm_mrc_x4, 1, limits->max_ofdm_mrc_x4); 6239 6240 } else if (fa < 5 * rxena) { 6241 /* Low false alarm count, increase sensitivity. */ 6242 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6243 "%s: OFDM low false alarm count: %u\n", __func__, fa); 6244 dec(calib->ofdm_x1, 1, limits->min_ofdm_x1); 6245 dec(calib->ofdm_mrc_x1, 1, limits->min_ofdm_mrc_x1); 6246 dec(calib->ofdm_x4, 1, limits->min_ofdm_x4); 6247 dec(calib->ofdm_mrc_x4, 1, limits->min_ofdm_mrc_x4); 6248 } 6249 6250 /* Compute maximum noise among 3 receivers. */ 6251 for (i = 0; i < 3; i++) 6252 noise[i] = (le32toh(stats->general.noise[i]) >> 8) & 0xff; 6253 val = MAX(noise[0], noise[1]); 6254 val = MAX(noise[2], val); 6255 /* Insert it into our samples table. */ 6256 calib->noise_samples[calib->cur_noise_sample] = val; 6257 calib->cur_noise_sample = (calib->cur_noise_sample + 1) % 20; 6258 6259 /* Compute maximum noise among last 20 samples. */ 6260 noise_ref = calib->noise_samples[0]; 6261 for (i = 1; i < 20; i++) 6262 noise_ref = MAX(noise_ref, calib->noise_samples[i]); 6263 6264 /* Compute maximum energy among 3 receivers. */ 6265 for (i = 0; i < 3; i++) 6266 energy[i] = le32toh(stats->general.energy[i]); 6267 val = MIN(energy[0], energy[1]); 6268 val = MIN(energy[2], val); 6269 /* Insert it into our samples table. */ 6270 calib->energy_samples[calib->cur_energy_sample] = val; 6271 calib->cur_energy_sample = (calib->cur_energy_sample + 1) % 10; 6272 6273 /* Compute minimum energy among last 10 samples. */ 6274 energy_min = calib->energy_samples[0]; 6275 for (i = 1; i < 10; i++) 6276 energy_min = MAX(energy_min, calib->energy_samples[i]); 6277 energy_min += 6; 6278 6279 /* Compute number of false alarms since last call for CCK. */ 6280 fa = le32toh(stats->cck.bad_plcp) - calib->bad_plcp_cck; 6281 fa += le32toh(stats->cck.fa) - calib->fa_cck; 6282 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6283 6284 if (fa > 50 * rxena) { 6285 /* High false alarm count, decrease sensitivity. */ 6286 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6287 "%s: CCK high false alarm count: %u\n", __func__, fa); 6288 calib->cck_state = IWN_CCK_STATE_HIFA; 6289 calib->low_fa = 0; 6290 6291 if (calib->cck_x4 > 160) { 6292 calib->noise_ref = noise_ref; 6293 if (calib->energy_cck > 2) 6294 dec(calib->energy_cck, 2, energy_min); 6295 } 6296 if (calib->cck_x4 < 160) { 6297 calib->cck_x4 = 161; 6298 needs_update = 1; 6299 } else 6300 inc(calib->cck_x4, 3, limits->max_cck_x4); 6301 6302 inc(calib->cck_mrc_x4, 3, limits->max_cck_mrc_x4); 6303 6304 } else if (fa < 5 * rxena) { 6305 /* Low false alarm count, increase sensitivity. */ 6306 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6307 "%s: CCK low false alarm count: %u\n", __func__, fa); 6308 calib->cck_state = IWN_CCK_STATE_LOFA; 6309 calib->low_fa++; 6310 6311 if (calib->cck_state != IWN_CCK_STATE_INIT && 6312 (((int32_t)calib->noise_ref - (int32_t)noise_ref) > 2 || 6313 calib->low_fa > 100)) { 6314 inc(calib->energy_cck, 2, limits->min_energy_cck); 6315 dec(calib->cck_x4, 3, limits->min_cck_x4); 6316 dec(calib->cck_mrc_x4, 3, limits->min_cck_mrc_x4); 6317 } 6318 } else { 6319 /* Not worth to increase or decrease sensitivity. */ 6320 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6321 "%s: CCK normal false alarm count: %u\n", __func__, fa); 6322 calib->low_fa = 0; 6323 calib->noise_ref = noise_ref; 6324 6325 if (calib->cck_state == IWN_CCK_STATE_HIFA) { 6326 /* Previous interval had many false alarms. */ 6327 dec(calib->energy_cck, 8, energy_min); 6328 } 6329 calib->cck_state = IWN_CCK_STATE_INIT; 6330 } 6331 6332 if (needs_update) 6333 (void)iwn_send_sensitivity(sc); 6334 6335 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6336 6337 #undef dec 6338 #undef inc 6339 } 6340 6341 static int 6342 iwn_send_sensitivity(struct iwn_softc *sc) 6343 { 6344 struct iwn_calib_state *calib = &sc->calib; 6345 struct iwn_enhanced_sensitivity_cmd cmd; 6346 int len; 6347 6348 memset(&cmd, 0, sizeof cmd); 6349 len = sizeof (struct iwn_sensitivity_cmd); 6350 cmd.which = IWN_SENSITIVITY_WORKTBL; 6351 /* OFDM modulation. */ 6352 cmd.corr_ofdm_x1 = htole16(calib->ofdm_x1); 6353 cmd.corr_ofdm_mrc_x1 = htole16(calib->ofdm_mrc_x1); 6354 cmd.corr_ofdm_x4 = htole16(calib->ofdm_x4); 6355 cmd.corr_ofdm_mrc_x4 = htole16(calib->ofdm_mrc_x4); 6356 cmd.energy_ofdm = htole16(sc->limits->energy_ofdm); 6357 cmd.energy_ofdm_th = htole16(62); 6358 /* CCK modulation. */ 6359 cmd.corr_cck_x4 = htole16(calib->cck_x4); 6360 cmd.corr_cck_mrc_x4 = htole16(calib->cck_mrc_x4); 6361 cmd.energy_cck = htole16(calib->energy_cck); 6362 /* Barker modulation: use default values. */ 6363 cmd.corr_barker = htole16(190); 6364 cmd.corr_barker_mrc = htole16(sc->limits->barker_mrc); 6365 6366 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6367 "%s: set sensitivity %d/%d/%d/%d/%d/%d/%d\n", __func__, 6368 calib->ofdm_x1, calib->ofdm_mrc_x1, calib->ofdm_x4, 6369 calib->ofdm_mrc_x4, calib->cck_x4, 6370 calib->cck_mrc_x4, calib->energy_cck); 6371 6372 if (!(sc->sc_flags & IWN_FLAG_ENH_SENS)) 6373 goto send; 6374 /* Enhanced sensitivity settings. */ 6375 len = sizeof (struct iwn_enhanced_sensitivity_cmd); 6376 cmd.ofdm_det_slope_mrc = htole16(668); 6377 cmd.ofdm_det_icept_mrc = htole16(4); 6378 cmd.ofdm_det_slope = htole16(486); 6379 cmd.ofdm_det_icept = htole16(37); 6380 cmd.cck_det_slope_mrc = htole16(853); 6381 cmd.cck_det_icept_mrc = htole16(4); 6382 cmd.cck_det_slope = htole16(476); 6383 cmd.cck_det_icept = htole16(99); 6384 send: 6385 return iwn_cmd(sc, IWN_CMD_SET_SENSITIVITY, &cmd, len, 1); 6386 } 6387 6388 /* 6389 * Look at the increase of PLCP errors over time; if it exceeds 6390 * a programmed threshold then trigger an RF retune. 6391 */ 6392 static void 6393 iwn_check_rx_recovery(struct iwn_softc *sc, struct iwn_stats *rs) 6394 { 6395 int32_t delta_ofdm, delta_ht, delta_cck; 6396 struct iwn_calib_state *calib = &sc->calib; 6397 int delta_ticks, cur_ticks; 6398 int delta_msec; 6399 int thresh; 6400 6401 /* 6402 * Calculate the difference between the current and 6403 * previous statistics. 6404 */ 6405 delta_cck = le32toh(rs->rx.cck.bad_plcp) - calib->bad_plcp_cck; 6406 delta_ofdm = le32toh(rs->rx.ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6407 delta_ht = le32toh(rs->rx.ht.bad_plcp) - calib->bad_plcp_ht; 6408 6409 /* 6410 * Calculate the delta in time between successive statistics 6411 * messages. Yes, it can roll over; so we make sure that 6412 * this doesn't happen. 6413 * 6414 * XXX go figure out what to do about rollover 6415 * XXX go figure out what to do if ticks rolls over to -ve instead! 6416 * XXX go stab signed integer overflow undefined-ness in the face. 6417 */ 6418 cur_ticks = ticks; 6419 delta_ticks = cur_ticks - sc->last_calib_ticks; 6420 6421 /* 6422 * If any are negative, then the firmware likely reset; so just 6423 * bail. We'll pick this up next time. 6424 */ 6425 if (delta_cck < 0 || delta_ofdm < 0 || delta_ht < 0 || delta_ticks < 0) 6426 return; 6427 6428 /* 6429 * delta_ticks is in ticks; we need to convert it up to milliseconds 6430 * so we can do some useful math with it. 6431 */ 6432 delta_msec = ticks_to_msecs(delta_ticks); 6433 6434 /* 6435 * Calculate what our threshold is given the current delta_msec. 6436 */ 6437 thresh = sc->base_params->plcp_err_threshold * delta_msec; 6438 6439 DPRINTF(sc, IWN_DEBUG_STATE, 6440 "%s: time delta: %d; cck=%d, ofdm=%d, ht=%d, total=%d, thresh=%d\n", 6441 __func__, 6442 delta_msec, 6443 delta_cck, 6444 delta_ofdm, 6445 delta_ht, 6446 (delta_msec + delta_cck + delta_ofdm + delta_ht), 6447 thresh); 6448 6449 /* 6450 * If we need a retune, then schedule a single channel scan 6451 * to a channel that isn't the currently active one! 6452 * 6453 * The math from linux iwlwifi: 6454 * 6455 * if ((delta * 100 / msecs) > threshold) 6456 */ 6457 if (thresh > 0 && (delta_cck + delta_ofdm + delta_ht) * 100 > thresh) { 6458 DPRINTF(sc, IWN_DEBUG_ANY, 6459 "%s: PLCP error threshold raw (%d) comparison (%d) " 6460 "over limit (%d); retune!\n", 6461 __func__, 6462 (delta_cck + delta_ofdm + delta_ht), 6463 (delta_cck + delta_ofdm + delta_ht) * 100, 6464 thresh); 6465 } 6466 } 6467 6468 /* 6469 * Set STA mode power saving level (between 0 and 5). 6470 * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving. 6471 */ 6472 static int 6473 iwn_set_pslevel(struct iwn_softc *sc, int dtim, int level, int async) 6474 { 6475 struct iwn_pmgt_cmd cmd; 6476 const struct iwn_pmgt *pmgt; 6477 uint32_t max, skip_dtim; 6478 uint32_t reg; 6479 int i; 6480 6481 DPRINTF(sc, IWN_DEBUG_PWRSAVE, 6482 "%s: dtim=%d, level=%d, async=%d\n", 6483 __func__, 6484 dtim, 6485 level, 6486 async); 6487 6488 /* Select which PS parameters to use. */ 6489 if (dtim <= 2) 6490 pmgt = &iwn_pmgt[0][level]; 6491 else if (dtim <= 10) 6492 pmgt = &iwn_pmgt[1][level]; 6493 else 6494 pmgt = &iwn_pmgt[2][level]; 6495 6496 memset(&cmd, 0, sizeof cmd); 6497 if (level != 0) /* not CAM */ 6498 cmd.flags |= htole16(IWN_PS_ALLOW_SLEEP); 6499 if (level == 5) 6500 cmd.flags |= htole16(IWN_PS_FAST_PD); 6501 /* Retrieve PCIe Active State Power Management (ASPM). */ 6502 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + PCIER_LINK_CTL, 4); 6503 if (!(reg & PCIEM_LINK_CTL_ASPMC_L0S)) /* L0s Entry disabled. */ 6504 cmd.flags |= htole16(IWN_PS_PCI_PMGT); 6505 cmd.rxtimeout = htole32(pmgt->rxtimeout * 1024); 6506 cmd.txtimeout = htole32(pmgt->txtimeout * 1024); 6507 6508 if (dtim == 0) { 6509 dtim = 1; 6510 skip_dtim = 0; 6511 } else 6512 skip_dtim = pmgt->skip_dtim; 6513 if (skip_dtim != 0) { 6514 cmd.flags |= htole16(IWN_PS_SLEEP_OVER_DTIM); 6515 max = pmgt->intval[4]; 6516 if (max == (uint32_t)-1) 6517 max = dtim * (skip_dtim + 1); 6518 else if (max > dtim) 6519 max = rounddown(max, dtim); 6520 } else 6521 max = dtim; 6522 for (i = 0; i < 5; i++) 6523 cmd.intval[i] = htole32(MIN(max, pmgt->intval[i])); 6524 6525 DPRINTF(sc, IWN_DEBUG_RESET, "setting power saving level to %d\n", 6526 level); 6527 return iwn_cmd(sc, IWN_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async); 6528 } 6529 6530 static int 6531 iwn_send_btcoex(struct iwn_softc *sc) 6532 { 6533 struct iwn_bluetooth cmd; 6534 6535 memset(&cmd, 0, sizeof cmd); 6536 cmd.flags = IWN_BT_COEX_CHAN_ANN | IWN_BT_COEX_BT_PRIO; 6537 cmd.lead_time = IWN_BT_LEAD_TIME_DEF; 6538 cmd.max_kill = IWN_BT_MAX_KILL_DEF; 6539 DPRINTF(sc, IWN_DEBUG_RESET, "%s: configuring bluetooth coexistence\n", 6540 __func__); 6541 return iwn_cmd(sc, IWN_CMD_BT_COEX, &cmd, sizeof(cmd), 0); 6542 } 6543 6544 static int 6545 iwn_send_advanced_btcoex(struct iwn_softc *sc) 6546 { 6547 static const uint32_t btcoex_3wire[12] = { 6548 0xaaaaaaaa, 0xaaaaaaaa, 0xaeaaaaaa, 0xaaaaaaaa, 6549 0xcc00ff28, 0x0000aaaa, 0xcc00aaaa, 0x0000aaaa, 6550 0xc0004000, 0x00004000, 0xf0005000, 0xf0005000, 6551 }; 6552 struct iwn6000_btcoex_config btconfig; 6553 struct iwn2000_btcoex_config btconfig2k; 6554 struct iwn_btcoex_priotable btprio; 6555 struct iwn_btcoex_prot btprot; 6556 int error, i; 6557 uint8_t flags; 6558 6559 memset(&btconfig, 0, sizeof btconfig); 6560 memset(&btconfig2k, 0, sizeof btconfig2k); 6561 6562 flags = IWN_BT_FLAG_COEX6000_MODE_3W << 6563 IWN_BT_FLAG_COEX6000_MODE_SHIFT; // Done as is in linux kernel 3.2 6564 6565 if (sc->base_params->bt_sco_disable) 6566 flags &= ~IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6567 else 6568 flags |= IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6569 6570 flags |= IWN_BT_FLAG_COEX6000_CHAN_INHIBITION; 6571 6572 /* Default flags result is 145 as old value */ 6573 6574 /* 6575 * Flags value has to be review. Values must change if we 6576 * which to disable it 6577 */ 6578 if (sc->base_params->bt_session_2) { 6579 btconfig2k.flags = flags; 6580 btconfig2k.max_kill = 5; 6581 btconfig2k.bt3_t7_timer = 1; 6582 btconfig2k.kill_ack = htole32(0xffff0000); 6583 btconfig2k.kill_cts = htole32(0xffff0000); 6584 btconfig2k.sample_time = 2; 6585 btconfig2k.bt3_t2_timer = 0xc; 6586 6587 for (i = 0; i < 12; i++) 6588 btconfig2k.lookup_table[i] = htole32(btcoex_3wire[i]); 6589 btconfig2k.valid = htole16(0xff); 6590 btconfig2k.prio_boost = htole32(0xf0); 6591 DPRINTF(sc, IWN_DEBUG_RESET, 6592 "%s: configuring advanced bluetooth coexistence" 6593 " session 2, flags : 0x%x\n", 6594 __func__, 6595 flags); 6596 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig2k, 6597 sizeof(btconfig2k), 1); 6598 } else { 6599 btconfig.flags = flags; 6600 btconfig.max_kill = 5; 6601 btconfig.bt3_t7_timer = 1; 6602 btconfig.kill_ack = htole32(0xffff0000); 6603 btconfig.kill_cts = htole32(0xffff0000); 6604 btconfig.sample_time = 2; 6605 btconfig.bt3_t2_timer = 0xc; 6606 6607 for (i = 0; i < 12; i++) 6608 btconfig.lookup_table[i] = htole32(btcoex_3wire[i]); 6609 btconfig.valid = htole16(0xff); 6610 btconfig.prio_boost = 0xf0; 6611 DPRINTF(sc, IWN_DEBUG_RESET, 6612 "%s: configuring advanced bluetooth coexistence," 6613 " flags : 0x%x\n", 6614 __func__, 6615 flags); 6616 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig, 6617 sizeof(btconfig), 1); 6618 } 6619 6620 if (error != 0) 6621 return error; 6622 6623 memset(&btprio, 0, sizeof btprio); 6624 btprio.calib_init1 = 0x6; 6625 btprio.calib_init2 = 0x7; 6626 btprio.calib_periodic_low1 = 0x2; 6627 btprio.calib_periodic_low2 = 0x3; 6628 btprio.calib_periodic_high1 = 0x4; 6629 btprio.calib_periodic_high2 = 0x5; 6630 btprio.dtim = 0x6; 6631 btprio.scan52 = 0x8; 6632 btprio.scan24 = 0xa; 6633 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PRIOTABLE, &btprio, sizeof(btprio), 6634 1); 6635 if (error != 0) 6636 return error; 6637 6638 /* Force BT state machine change. */ 6639 memset(&btprot, 0, sizeof btprot); 6640 btprot.open = 1; 6641 btprot.type = 1; 6642 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6643 if (error != 0) 6644 return error; 6645 btprot.open = 0; 6646 return iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6647 } 6648 6649 static int 6650 iwn5000_runtime_calib(struct iwn_softc *sc) 6651 { 6652 struct iwn5000_calib_config cmd; 6653 6654 memset(&cmd, 0, sizeof cmd); 6655 cmd.ucode.once.enable = 0xffffffff; 6656 cmd.ucode.once.start = IWN5000_CALIB_DC; 6657 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6658 "%s: configuring runtime calibration\n", __func__); 6659 return iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof(cmd), 0); 6660 } 6661 6662 static uint32_t 6663 iwn_get_rxon_ht_flags(struct iwn_softc *sc, struct ieee80211_channel *c) 6664 { 6665 struct ieee80211com *ic = &sc->sc_ic; 6666 uint32_t htflags = 0; 6667 6668 if (! IEEE80211_IS_CHAN_HT(c)) 6669 return (0); 6670 6671 htflags |= IWN_RXON_HT_PROTMODE(ic->ic_curhtprotmode); 6672 6673 if (IEEE80211_IS_CHAN_HT40(c)) { 6674 switch (ic->ic_curhtprotmode) { 6675 case IEEE80211_HTINFO_OPMODE_HT20PR: 6676 htflags |= IWN_RXON_HT_MODEPURE40; 6677 break; 6678 default: 6679 htflags |= IWN_RXON_HT_MODEMIXED; 6680 break; 6681 } 6682 } 6683 if (IEEE80211_IS_CHAN_HT40D(c)) 6684 htflags |= IWN_RXON_HT_HT40MINUS; 6685 6686 return (htflags); 6687 } 6688 6689 static int 6690 iwn_check_bss_filter(struct iwn_softc *sc) 6691 { 6692 return ((sc->rxon->filter & htole32(IWN_FILTER_BSS)) != 0); 6693 } 6694 6695 static int 6696 iwn4965_rxon_assoc(struct iwn_softc *sc, int async) 6697 { 6698 struct iwn4965_rxon_assoc cmd; 6699 struct iwn_rxon *rxon = sc->rxon; 6700 6701 cmd.flags = rxon->flags; 6702 cmd.filter = rxon->filter; 6703 cmd.ofdm_mask = rxon->ofdm_mask; 6704 cmd.cck_mask = rxon->cck_mask; 6705 cmd.ht_single_mask = rxon->ht_single_mask; 6706 cmd.ht_dual_mask = rxon->ht_dual_mask; 6707 cmd.rxchain = rxon->rxchain; 6708 cmd.reserved = 0; 6709 6710 return (iwn_cmd(sc, IWN_CMD_RXON_ASSOC, &cmd, sizeof(cmd), async)); 6711 } 6712 6713 static int 6714 iwn5000_rxon_assoc(struct iwn_softc *sc, int async) 6715 { 6716 struct iwn5000_rxon_assoc cmd; 6717 struct iwn_rxon *rxon = sc->rxon; 6718 6719 cmd.flags = rxon->flags; 6720 cmd.filter = rxon->filter; 6721 cmd.ofdm_mask = rxon->ofdm_mask; 6722 cmd.cck_mask = rxon->cck_mask; 6723 cmd.reserved1 = 0; 6724 cmd.ht_single_mask = rxon->ht_single_mask; 6725 cmd.ht_dual_mask = rxon->ht_dual_mask; 6726 cmd.ht_triple_mask = rxon->ht_triple_mask; 6727 cmd.reserved2 = 0; 6728 cmd.rxchain = rxon->rxchain; 6729 cmd.acquisition = rxon->acquisition; 6730 cmd.reserved3 = 0; 6731 6732 return (iwn_cmd(sc, IWN_CMD_RXON_ASSOC, &cmd, sizeof(cmd), async)); 6733 } 6734 6735 static int 6736 iwn_send_rxon(struct iwn_softc *sc, int assoc, int async) 6737 { 6738 struct iwn_ops *ops = &sc->ops; 6739 int error; 6740 6741 IWN_LOCK_ASSERT(sc); 6742 6743 if (assoc && iwn_check_bss_filter(sc) != 0) { 6744 error = ops->rxon_assoc(sc, async); 6745 if (error != 0) { 6746 device_printf(sc->sc_dev, 6747 "%s: RXON_ASSOC command failed, error %d\n", 6748 __func__, error); 6749 return (error); 6750 } 6751 } else { 6752 if (sc->sc_is_scanning) 6753 device_printf(sc->sc_dev, 6754 "%s: is_scanning set, before RXON\n", 6755 __func__); 6756 6757 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, async); 6758 if (error != 0) { 6759 device_printf(sc->sc_dev, 6760 "%s: RXON command failed, error %d\n", 6761 __func__, error); 6762 return (error); 6763 } 6764 6765 /* 6766 * Reconfiguring RXON clears the firmware nodes table so 6767 * we must add the broadcast node again. 6768 */ 6769 if (iwn_check_bss_filter(sc) == 0 && 6770 (error = iwn_add_broadcast_node(sc, async)) != 0) { 6771 device_printf(sc->sc_dev, 6772 "%s: could not add broadcast node, error %d\n", 6773 __func__, error); 6774 return (error); 6775 } 6776 } 6777 6778 /* Configuration has changed, set TX power accordingly. */ 6779 if ((error = ops->set_txpower(sc, async)) != 0) { 6780 device_printf(sc->sc_dev, 6781 "%s: could not set TX power, error %d\n", 6782 __func__, error); 6783 return (error); 6784 } 6785 6786 return (0); 6787 } 6788 6789 static int 6790 iwn_config(struct iwn_softc *sc) 6791 { 6792 struct ieee80211com *ic = &sc->sc_ic; 6793 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 6794 const uint8_t *macaddr; 6795 uint32_t txmask; 6796 uint16_t rxchain; 6797 int error; 6798 6799 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6800 6801 if ((sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) 6802 && (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)) { 6803 device_printf(sc->sc_dev,"%s: temp_offset and temp_offsetv2 are" 6804 " exclusive each together. Review NIC config file. Conf" 6805 " : 0x%08x Flags : 0x%08x \n", __func__, 6806 sc->base_params->calib_need, 6807 (IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET | 6808 IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)); 6809 return (EINVAL); 6810 } 6811 6812 /* Compute temperature calib if needed. Will be send by send calib */ 6813 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) { 6814 error = iwn5000_temp_offset_calib(sc); 6815 if (error != 0) { 6816 device_printf(sc->sc_dev, 6817 "%s: could not set temperature offset\n", __func__); 6818 return (error); 6819 } 6820 } else if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 6821 error = iwn5000_temp_offset_calibv2(sc); 6822 if (error != 0) { 6823 device_printf(sc->sc_dev, 6824 "%s: could not compute temperature offset v2\n", 6825 __func__); 6826 return (error); 6827 } 6828 } 6829 6830 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 6831 /* Configure runtime DC calibration. */ 6832 error = iwn5000_runtime_calib(sc); 6833 if (error != 0) { 6834 device_printf(sc->sc_dev, 6835 "%s: could not configure runtime calibration\n", 6836 __func__); 6837 return error; 6838 } 6839 } 6840 6841 /* Configure valid TX chains for >=5000 Series. */ 6842 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 6843 IWN_UCODE_API(sc->ucode_rev) > 1) { 6844 txmask = htole32(sc->txchainmask); 6845 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6846 "%s: configuring valid TX chains 0x%x\n", __func__, txmask); 6847 error = iwn_cmd(sc, IWN5000_CMD_TX_ANT_CONFIG, &txmask, 6848 sizeof txmask, 0); 6849 if (error != 0) { 6850 device_printf(sc->sc_dev, 6851 "%s: could not configure valid TX chains, " 6852 "error %d\n", __func__, error); 6853 return error; 6854 } 6855 } 6856 6857 /* Configure bluetooth coexistence. */ 6858 error = 0; 6859 6860 /* Configure bluetooth coexistence if needed. */ 6861 if (sc->base_params->bt_mode == IWN_BT_ADVANCED) 6862 error = iwn_send_advanced_btcoex(sc); 6863 if (sc->base_params->bt_mode == IWN_BT_SIMPLE) 6864 error = iwn_send_btcoex(sc); 6865 6866 if (error != 0) { 6867 device_printf(sc->sc_dev, 6868 "%s: could not configure bluetooth coexistence, error %d\n", 6869 __func__, error); 6870 return error; 6871 } 6872 6873 /* Set mode, channel, RX filter and enable RX. */ 6874 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6875 memset(sc->rxon, 0, sizeof (struct iwn_rxon)); 6876 macaddr = vap ? vap->iv_myaddr : ic->ic_macaddr; 6877 IEEE80211_ADDR_COPY(sc->rxon->myaddr, macaddr); 6878 IEEE80211_ADDR_COPY(sc->rxon->wlap, macaddr); 6879 sc->rxon->chan = ieee80211_chan2ieee(ic, ic->ic_curchan); 6880 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 6881 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 6882 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 6883 6884 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST); 6885 switch (ic->ic_opmode) { 6886 case IEEE80211_M_STA: 6887 sc->rxon->mode = IWN_MODE_STA; 6888 break; 6889 case IEEE80211_M_MONITOR: 6890 sc->rxon->mode = IWN_MODE_MONITOR; 6891 break; 6892 default: 6893 /* Should not get there. */ 6894 break; 6895 } 6896 iwn_set_promisc(sc); 6897 sc->rxon->cck_mask = 0x0f; /* not yet negotiated */ 6898 sc->rxon->ofdm_mask = 0xff; /* not yet negotiated */ 6899 sc->rxon->ht_single_mask = 0xff; 6900 sc->rxon->ht_dual_mask = 0xff; 6901 sc->rxon->ht_triple_mask = 0xff; 6902 /* 6903 * In active association mode, ensure that 6904 * all the receive chains are enabled. 6905 * 6906 * Since we're not yet doing SMPS, don't allow the 6907 * number of idle RX chains to be less than the active 6908 * number. 6909 */ 6910 rxchain = 6911 IWN_RXCHAIN_VALID(sc->rxchainmask) | 6912 IWN_RXCHAIN_MIMO_COUNT(sc->nrxchains) | 6913 IWN_RXCHAIN_IDLE_COUNT(sc->nrxchains); 6914 sc->rxon->rxchain = htole16(rxchain); 6915 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6916 "%s: rxchainmask=0x%x, nrxchains=%d\n", 6917 __func__, 6918 sc->rxchainmask, 6919 sc->nrxchains); 6920 6921 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan)); 6922 6923 DPRINTF(sc, IWN_DEBUG_RESET, 6924 "%s: setting configuration; flags=0x%08x\n", 6925 __func__, le32toh(sc->rxon->flags)); 6926 if ((error = iwn_send_rxon(sc, 0, 0)) != 0) { 6927 device_printf(sc->sc_dev, "%s: could not send RXON\n", 6928 __func__); 6929 return error; 6930 } 6931 6932 if ((error = iwn_set_critical_temp(sc)) != 0) { 6933 device_printf(sc->sc_dev, 6934 "%s: could not set critical temperature\n", __func__); 6935 return error; 6936 } 6937 6938 /* Set power saving level to CAM during initialization. */ 6939 if ((error = iwn_set_pslevel(sc, 0, 0, 0)) != 0) { 6940 device_printf(sc->sc_dev, 6941 "%s: could not set power saving level\n", __func__); 6942 return error; 6943 } 6944 6945 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6946 6947 return 0; 6948 } 6949 6950 static uint16_t 6951 iwn_get_active_dwell_time(struct iwn_softc *sc, 6952 struct ieee80211_channel *c, uint8_t n_probes) 6953 { 6954 /* No channel? Default to 2GHz settings */ 6955 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 6956 return (IWN_ACTIVE_DWELL_TIME_2GHZ + 6957 IWN_ACTIVE_DWELL_FACTOR_2GHZ * (n_probes + 1)); 6958 } 6959 6960 /* 5GHz dwell time */ 6961 return (IWN_ACTIVE_DWELL_TIME_5GHZ + 6962 IWN_ACTIVE_DWELL_FACTOR_5GHZ * (n_probes + 1)); 6963 } 6964 6965 /* 6966 * Limit the total dwell time to 85% of the beacon interval. 6967 * 6968 * Returns the dwell time in milliseconds. 6969 */ 6970 static uint16_t 6971 iwn_limit_dwell(struct iwn_softc *sc, uint16_t dwell_time) 6972 { 6973 struct ieee80211com *ic = &sc->sc_ic; 6974 struct ieee80211vap *vap = NULL; 6975 int bintval = 0; 6976 6977 /* bintval is in TU (1.024mS) */ 6978 if (! TAILQ_EMPTY(&ic->ic_vaps)) { 6979 vap = TAILQ_FIRST(&ic->ic_vaps); 6980 bintval = vap->iv_bss->ni_intval; 6981 } 6982 6983 /* 6984 * If it's non-zero, we should calculate the minimum of 6985 * it and the DWELL_BASE. 6986 * 6987 * XXX Yes, the math should take into account that bintval 6988 * is 1.024mS, not 1mS.. 6989 */ 6990 if (bintval > 0) { 6991 DPRINTF(sc, IWN_DEBUG_SCAN, 6992 "%s: bintval=%d\n", 6993 __func__, 6994 bintval); 6995 return (MIN(IWN_PASSIVE_DWELL_BASE, ((bintval * 85) / 100))); 6996 } 6997 6998 /* No association context? Default */ 6999 return (IWN_PASSIVE_DWELL_BASE); 7000 } 7001 7002 static uint16_t 7003 iwn_get_passive_dwell_time(struct iwn_softc *sc, struct ieee80211_channel *c) 7004 { 7005 uint16_t passive; 7006 7007 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 7008 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_2GHZ; 7009 } else { 7010 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_5GHZ; 7011 } 7012 7013 /* Clamp to the beacon interval if we're associated */ 7014 return (iwn_limit_dwell(sc, passive)); 7015 } 7016 7017 static int 7018 iwn_scan(struct iwn_softc *sc, struct ieee80211vap *vap, 7019 struct ieee80211_scan_state *ss, struct ieee80211_channel *c) 7020 { 7021 struct ieee80211com *ic = &sc->sc_ic; 7022 struct ieee80211_node *ni = vap->iv_bss; 7023 struct iwn_scan_hdr *hdr; 7024 struct iwn_cmd_data *tx; 7025 struct iwn_scan_essid *essid; 7026 struct iwn_scan_chan *chan; 7027 struct ieee80211_frame *wh; 7028 struct ieee80211_rateset *rs; 7029 uint8_t *buf, *frm; 7030 uint16_t rxchain; 7031 uint8_t txant; 7032 int buflen, error; 7033 int is_active; 7034 uint16_t dwell_active, dwell_passive; 7035 uint32_t extra, scan_service_time; 7036 7037 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7038 7039 /* 7040 * We are absolutely not allowed to send a scan command when another 7041 * scan command is pending. 7042 */ 7043 if (sc->sc_is_scanning) { 7044 device_printf(sc->sc_dev, "%s: called whilst scanning!\n", 7045 __func__); 7046 return (EAGAIN); 7047 } 7048 7049 /* Assign the scan channel */ 7050 c = ic->ic_curchan; 7051 7052 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7053 buf = malloc(IWN_SCAN_MAXSZ, M_DEVBUF, M_NOWAIT | M_ZERO); 7054 if (buf == NULL) { 7055 device_printf(sc->sc_dev, 7056 "%s: could not allocate buffer for scan command\n", 7057 __func__); 7058 return ENOMEM; 7059 } 7060 hdr = (struct iwn_scan_hdr *)buf; 7061 /* 7062 * Move to the next channel if no frames are received within 10ms 7063 * after sending the probe request. 7064 */ 7065 hdr->quiet_time = htole16(10); /* timeout in milliseconds */ 7066 hdr->quiet_threshold = htole16(1); /* min # of packets */ 7067 /* 7068 * Max needs to be greater than active and passive and quiet! 7069 * It's also in microseconds! 7070 */ 7071 hdr->max_svc = htole32(250 * 1024); 7072 7073 /* 7074 * Reset scan: interval=100 7075 * Normal scan: interval=becaon interval 7076 * suspend_time: 100 (TU) 7077 * 7078 */ 7079 extra = (100 /* suspend_time */ / 100 /* beacon interval */) << 22; 7080 //scan_service_time = extra | ((100 /* susp */ % 100 /* int */) * 1024); 7081 scan_service_time = (4 << 22) | (100 * 1024); /* Hardcode for now! */ 7082 hdr->pause_svc = htole32(scan_service_time); 7083 7084 /* Select antennas for scanning. */ 7085 rxchain = 7086 IWN_RXCHAIN_VALID(sc->rxchainmask) | 7087 IWN_RXCHAIN_FORCE_MIMO_SEL(sc->rxchainmask) | 7088 IWN_RXCHAIN_DRIVER_FORCE; 7089 if (IEEE80211_IS_CHAN_A(c) && 7090 sc->hw_type == IWN_HW_REV_TYPE_4965) { 7091 /* Ant A must be avoided in 5GHz because of an HW bug. */ 7092 rxchain |= IWN_RXCHAIN_FORCE_SEL(IWN_ANT_B); 7093 } else /* Use all available RX antennas. */ 7094 rxchain |= IWN_RXCHAIN_FORCE_SEL(sc->rxchainmask); 7095 hdr->rxchain = htole16(rxchain); 7096 hdr->filter = htole32(IWN_FILTER_MULTICAST | IWN_FILTER_BEACON); 7097 7098 tx = (struct iwn_cmd_data *)(hdr + 1); 7099 tx->flags = htole32(IWN_TX_AUTO_SEQ); 7100 tx->id = sc->broadcast_id; 7101 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 7102 7103 if (IEEE80211_IS_CHAN_5GHZ(c)) { 7104 /* Send probe requests at 6Mbps. */ 7105 tx->rate = htole32(0xd); 7106 rs = &ic->ic_sup_rates[IEEE80211_MODE_11A]; 7107 } else { 7108 hdr->flags = htole32(IWN_RXON_24GHZ | IWN_RXON_AUTO); 7109 if (sc->hw_type == IWN_HW_REV_TYPE_4965 && 7110 sc->rxon->associd && sc->rxon->chan > 14) 7111 tx->rate = htole32(0xd); 7112 else { 7113 /* Send probe requests at 1Mbps. */ 7114 tx->rate = htole32(10 | IWN_RFLAG_CCK); 7115 } 7116 rs = &ic->ic_sup_rates[IEEE80211_MODE_11G]; 7117 } 7118 /* Use the first valid TX antenna. */ 7119 txant = IWN_LSB(sc->txchainmask); 7120 tx->rate |= htole32(IWN_RFLAG_ANT(txant)); 7121 7122 /* 7123 * Only do active scanning if we're announcing a probe request 7124 * for a given SSID (or more, if we ever add it to the driver.) 7125 */ 7126 is_active = 0; 7127 7128 /* 7129 * If we're scanning for a specific SSID, add it to the command. 7130 * 7131 * XXX maybe look at adding support for scanning multiple SSIDs? 7132 */ 7133 essid = (struct iwn_scan_essid *)(tx + 1); 7134 if (ss != NULL) { 7135 if (ss->ss_ssid[0].len != 0) { 7136 essid[0].id = IEEE80211_ELEMID_SSID; 7137 essid[0].len = ss->ss_ssid[0].len; 7138 memcpy(essid[0].data, ss->ss_ssid[0].ssid, ss->ss_ssid[0].len); 7139 } 7140 7141 DPRINTF(sc, IWN_DEBUG_SCAN, "%s: ssid_len=%d, ssid=%*s\n", 7142 __func__, 7143 ss->ss_ssid[0].len, 7144 ss->ss_ssid[0].len, 7145 ss->ss_ssid[0].ssid); 7146 7147 if (ss->ss_nssid > 0) 7148 is_active = 1; 7149 } 7150 7151 /* 7152 * Build a probe request frame. Most of the following code is a 7153 * copy & paste of what is done in net80211. 7154 */ 7155 wh = (struct ieee80211_frame *)(essid + 20); 7156 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 7157 IEEE80211_FC0_SUBTYPE_PROBE_REQ; 7158 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 7159 IEEE80211_ADDR_COPY(wh->i_addr1, vap->iv_ifp->if_broadcastaddr); 7160 IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(vap->iv_ifp)); 7161 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_ifp->if_broadcastaddr); 7162 *(uint16_t *)&wh->i_dur[0] = 0; /* filled by HW */ 7163 *(uint16_t *)&wh->i_seq[0] = 0; /* filled by HW */ 7164 7165 frm = (uint8_t *)(wh + 1); 7166 frm = ieee80211_add_ssid(frm, NULL, 0); 7167 frm = ieee80211_add_rates(frm, rs); 7168 if (rs->rs_nrates > IEEE80211_RATE_SIZE) 7169 frm = ieee80211_add_xrates(frm, rs); 7170 if (ic->ic_htcaps & IEEE80211_HTC_HT) 7171 frm = ieee80211_add_htcap(frm, ni); 7172 7173 /* Set length of probe request. */ 7174 tx->len = htole16(frm - (uint8_t *)wh); 7175 7176 /* 7177 * If active scanning is requested but a certain channel is 7178 * marked passive, we can do active scanning if we detect 7179 * transmissions. 7180 * 7181 * There is an issue with some firmware versions that triggers 7182 * a sysassert on a "good CRC threshold" of zero (== disabled), 7183 * on a radar channel even though this means that we should NOT 7184 * send probes. 7185 * 7186 * The "good CRC threshold" is the number of frames that we 7187 * need to receive during our dwell time on a channel before 7188 * sending out probes -- setting this to a huge value will 7189 * mean we never reach it, but at the same time work around 7190 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER 7191 * here instead of IWL_GOOD_CRC_TH_DISABLED. 7192 * 7193 * This was fixed in later versions along with some other 7194 * scan changes, and the threshold behaves as a flag in those 7195 * versions. 7196 */ 7197 7198 /* 7199 * If we're doing active scanning, set the crc_threshold 7200 * to a suitable value. This is different to active veruss 7201 * passive scanning depending upon the channel flags; the 7202 * firmware will obey that particular check for us. 7203 */ 7204 if (sc->tlv_feature_flags & IWN_UCODE_TLV_FLAGS_NEWSCAN) 7205 hdr->crc_threshold = is_active ? 7206 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_DISABLED; 7207 else 7208 hdr->crc_threshold = is_active ? 7209 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_NEVER; 7210 7211 chan = (struct iwn_scan_chan *)frm; 7212 chan->chan = htole16(ieee80211_chan2ieee(ic, c)); 7213 chan->flags = 0; 7214 if (ss->ss_nssid > 0) 7215 chan->flags |= htole32(IWN_CHAN_NPBREQS(1)); 7216 chan->dsp_gain = 0x6e; 7217 7218 /* 7219 * Set the passive/active flag depending upon the channel mode. 7220 * XXX TODO: take the is_active flag into account as well? 7221 */ 7222 if (c->ic_flags & IEEE80211_CHAN_PASSIVE) 7223 chan->flags |= htole32(IWN_CHAN_PASSIVE); 7224 else 7225 chan->flags |= htole32(IWN_CHAN_ACTIVE); 7226 7227 /* 7228 * Calculate the active/passive dwell times. 7229 */ 7230 7231 dwell_active = iwn_get_active_dwell_time(sc, c, ss->ss_nssid); 7232 dwell_passive = iwn_get_passive_dwell_time(sc, c); 7233 7234 /* Make sure they're valid */ 7235 if (dwell_passive <= dwell_active) 7236 dwell_passive = dwell_active + 1; 7237 7238 chan->active = htole16(dwell_active); 7239 chan->passive = htole16(dwell_passive); 7240 7241 if (IEEE80211_IS_CHAN_5GHZ(c)) 7242 chan->rf_gain = 0x3b; 7243 else 7244 chan->rf_gain = 0x28; 7245 7246 DPRINTF(sc, IWN_DEBUG_STATE, 7247 "%s: chan %u flags 0x%x rf_gain 0x%x " 7248 "dsp_gain 0x%x active %d passive %d scan_svc_time %d crc 0x%x " 7249 "isactive=%d numssid=%d\n", __func__, 7250 chan->chan, chan->flags, chan->rf_gain, chan->dsp_gain, 7251 dwell_active, dwell_passive, scan_service_time, 7252 hdr->crc_threshold, is_active, ss->ss_nssid); 7253 7254 hdr->nchan++; 7255 chan++; 7256 buflen = (uint8_t *)chan - buf; 7257 hdr->len = htole16(buflen); 7258 7259 if (sc->sc_is_scanning) { 7260 device_printf(sc->sc_dev, 7261 "%s: called with is_scanning set!\n", 7262 __func__); 7263 } 7264 sc->sc_is_scanning = 1; 7265 7266 DPRINTF(sc, IWN_DEBUG_STATE, "sending scan command nchan=%d\n", 7267 hdr->nchan); 7268 error = iwn_cmd(sc, IWN_CMD_SCAN, buf, buflen, 1); 7269 free(buf, M_DEVBUF); 7270 if (error == 0) 7271 callout_reset(&sc->scan_timeout, 5*hz, iwn_scan_timeout, sc); 7272 7273 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7274 7275 return error; 7276 } 7277 7278 static int 7279 iwn_auth(struct iwn_softc *sc, struct ieee80211vap *vap) 7280 { 7281 struct ieee80211com *ic = &sc->sc_ic; 7282 struct ieee80211_node *ni = vap->iv_bss; 7283 int error; 7284 7285 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7286 7287 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7288 /* Update adapter configuration. */ 7289 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 7290 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 7291 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7292 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7293 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7294 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7295 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7296 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7297 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7298 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7299 sc->rxon->cck_mask = 0; 7300 sc->rxon->ofdm_mask = 0x15; 7301 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7302 sc->rxon->cck_mask = 0x03; 7303 sc->rxon->ofdm_mask = 0; 7304 } else { 7305 /* Assume 802.11b/g. */ 7306 sc->rxon->cck_mask = 0x03; 7307 sc->rxon->ofdm_mask = 0x15; 7308 } 7309 7310 /* try HT */ 7311 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan)); 7312 7313 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x cck %x ofdm %x\n", 7314 sc->rxon->chan, sc->rxon->flags, sc->rxon->cck_mask, 7315 sc->rxon->ofdm_mask); 7316 7317 if ((error = iwn_send_rxon(sc, 0, 1)) != 0) { 7318 device_printf(sc->sc_dev, "%s: could not send RXON\n", 7319 __func__); 7320 return (error); 7321 } 7322 7323 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7324 7325 return (0); 7326 } 7327 7328 static int 7329 iwn_run(struct iwn_softc *sc, struct ieee80211vap *vap) 7330 { 7331 struct iwn_ops *ops = &sc->ops; 7332 struct ieee80211com *ic = &sc->sc_ic; 7333 struct ieee80211_node *ni = vap->iv_bss; 7334 struct iwn_node_info node; 7335 int error; 7336 7337 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7338 7339 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7340 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 7341 /* Link LED blinks while monitoring. */ 7342 iwn_set_led(sc, IWN_LED_LINK, 5, 5); 7343 return 0; 7344 } 7345 if ((error = iwn_set_timing(sc, ni)) != 0) { 7346 device_printf(sc->sc_dev, 7347 "%s: could not set timing, error %d\n", __func__, error); 7348 return error; 7349 } 7350 7351 /* Update adapter configuration. */ 7352 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 7353 sc->rxon->associd = htole16(IEEE80211_AID(ni->ni_associd)); 7354 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 7355 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7356 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7357 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7358 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7359 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7360 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7361 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7362 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7363 sc->rxon->cck_mask = 0; 7364 sc->rxon->ofdm_mask = 0x15; 7365 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7366 sc->rxon->cck_mask = 0x03; 7367 sc->rxon->ofdm_mask = 0; 7368 } else { 7369 /* Assume 802.11b/g. */ 7370 sc->rxon->cck_mask = 0x0f; 7371 sc->rxon->ofdm_mask = 0x15; 7372 } 7373 /* try HT */ 7374 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ni->ni_chan)); 7375 sc->rxon->filter |= htole32(IWN_FILTER_BSS); 7376 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x, curhtprotmode=%d\n", 7377 sc->rxon->chan, le32toh(sc->rxon->flags), ic->ic_curhtprotmode); 7378 7379 if ((error = iwn_send_rxon(sc, 0, 1)) != 0) { 7380 device_printf(sc->sc_dev, "%s: could not send RXON\n", 7381 __func__); 7382 return error; 7383 } 7384 7385 /* Fake a join to initialize the TX rate. */ 7386 ((struct iwn_node *)ni)->id = IWN_ID_BSS; 7387 iwn_newassoc(ni, 1); 7388 7389 /* Add BSS node. */ 7390 memset(&node, 0, sizeof node); 7391 IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); 7392 node.id = IWN_ID_BSS; 7393 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 7394 switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) { 7395 case IEEE80211_HTCAP_SMPS_ENA: 7396 node.htflags |= htole32(IWN_SMPS_MIMO_DIS); 7397 break; 7398 case IEEE80211_HTCAP_SMPS_DYNAMIC: 7399 node.htflags |= htole32(IWN_SMPS_MIMO_PROT); 7400 break; 7401 } 7402 node.htflags |= htole32(IWN_AMDPU_SIZE_FACTOR(3) | 7403 IWN_AMDPU_DENSITY(5)); /* 4us */ 7404 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) 7405 node.htflags |= htole32(IWN_NODE_HT40); 7406 } 7407 DPRINTF(sc, IWN_DEBUG_STATE, "%s: adding BSS node\n", __func__); 7408 error = ops->add_node(sc, &node, 1); 7409 if (error != 0) { 7410 device_printf(sc->sc_dev, 7411 "%s: could not add BSS node, error %d\n", __func__, error); 7412 return error; 7413 } 7414 DPRINTF(sc, IWN_DEBUG_STATE, "%s: setting link quality for node %d\n", 7415 __func__, node.id); 7416 if ((error = iwn_set_link_quality(sc, ni)) != 0) { 7417 device_printf(sc->sc_dev, 7418 "%s: could not setup link quality for node %d, error %d\n", 7419 __func__, node.id, error); 7420 return error; 7421 } 7422 7423 if ((error = iwn_init_sensitivity(sc)) != 0) { 7424 device_printf(sc->sc_dev, 7425 "%s: could not set sensitivity, error %d\n", __func__, 7426 error); 7427 return error; 7428 } 7429 /* Start periodic calibration timer. */ 7430 sc->calib.state = IWN_CALIB_STATE_ASSOC; 7431 sc->calib_cnt = 0; 7432 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 7433 sc); 7434 7435 /* Link LED always on while associated. */ 7436 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 7437 7438 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7439 7440 return 0; 7441 } 7442 7443 /* 7444 * This function is called by upper layer when an ADDBA request is received 7445 * from another STA and before the ADDBA response is sent. 7446 */ 7447 static int 7448 iwn_ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, 7449 int baparamset, int batimeout, int baseqctl) 7450 { 7451 #define MS(_v, _f) (((_v) & _f) >> _f##_S) 7452 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7453 struct iwn_ops *ops = &sc->ops; 7454 struct iwn_node *wn = (void *)ni; 7455 struct iwn_node_info node; 7456 uint16_t ssn; 7457 uint8_t tid; 7458 int error; 7459 7460 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7461 7462 tid = MS(le16toh(baparamset), IEEE80211_BAPS_TID); 7463 ssn = MS(le16toh(baseqctl), IEEE80211_BASEQ_START); 7464 7465 if (wn->id == IWN_ID_UNDEFINED) 7466 return (ENOENT); 7467 7468 memset(&node, 0, sizeof node); 7469 node.id = wn->id; 7470 node.control = IWN_NODE_UPDATE; 7471 node.flags = IWN_FLAG_SET_ADDBA; 7472 node.addba_tid = tid; 7473 node.addba_ssn = htole16(ssn); 7474 DPRINTF(sc, IWN_DEBUG_RECV, "ADDBA RA=%d TID=%d SSN=%d\n", 7475 wn->id, tid, ssn); 7476 error = ops->add_node(sc, &node, 1); 7477 if (error != 0) 7478 return error; 7479 return sc->sc_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl); 7480 #undef MS 7481 } 7482 7483 /* 7484 * This function is called by upper layer on teardown of an HT-immediate 7485 * Block Ack agreement (eg. uppon receipt of a DELBA frame). 7486 */ 7487 static void 7488 iwn_ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) 7489 { 7490 struct ieee80211com *ic = ni->ni_ic; 7491 struct iwn_softc *sc = ic->ic_softc; 7492 struct iwn_ops *ops = &sc->ops; 7493 struct iwn_node *wn = (void *)ni; 7494 struct iwn_node_info node; 7495 uint8_t tid; 7496 7497 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7498 7499 if (wn->id == IWN_ID_UNDEFINED) 7500 goto end; 7501 7502 /* XXX: tid as an argument */ 7503 for (tid = 0; tid < WME_NUM_TID; tid++) { 7504 if (&ni->ni_rx_ampdu[tid] == rap) 7505 break; 7506 } 7507 7508 memset(&node, 0, sizeof node); 7509 node.id = wn->id; 7510 node.control = IWN_NODE_UPDATE; 7511 node.flags = IWN_FLAG_SET_DELBA; 7512 node.delba_tid = tid; 7513 DPRINTF(sc, IWN_DEBUG_RECV, "DELBA RA=%d TID=%d\n", wn->id, tid); 7514 (void)ops->add_node(sc, &node, 1); 7515 end: 7516 sc->sc_ampdu_rx_stop(ni, rap); 7517 } 7518 7519 static int 7520 iwn_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7521 int dialogtoken, int baparamset, int batimeout) 7522 { 7523 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7524 int qid; 7525 7526 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7527 7528 for (qid = sc->firstaggqueue; qid < sc->ntxqs; qid++) { 7529 if (sc->qid2tap[qid] == NULL) 7530 break; 7531 } 7532 if (qid == sc->ntxqs) { 7533 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: not free aggregation queue\n", 7534 __func__); 7535 return 0; 7536 } 7537 tap->txa_private = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 7538 if (tap->txa_private == NULL) { 7539 device_printf(sc->sc_dev, 7540 "%s: failed to alloc TX aggregation structure\n", __func__); 7541 return 0; 7542 } 7543 sc->qid2tap[qid] = tap; 7544 *(int *)tap->txa_private = qid; 7545 return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, 7546 batimeout); 7547 } 7548 7549 static int 7550 iwn_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7551 int code, int baparamset, int batimeout) 7552 { 7553 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7554 int qid = *(int *)tap->txa_private; 7555 uint8_t tid = tap->txa_tid; 7556 int ret; 7557 7558 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7559 7560 if (code == IEEE80211_STATUS_SUCCESS) { 7561 ni->ni_txseqs[tid] = tap->txa_start & 0xfff; 7562 ret = iwn_ampdu_tx_start(ni->ni_ic, ni, tid); 7563 if (ret != 1) 7564 return ret; 7565 } else { 7566 sc->qid2tap[qid] = NULL; 7567 free(tap->txa_private, M_DEVBUF); 7568 tap->txa_private = NULL; 7569 } 7570 return sc->sc_addba_response(ni, tap, code, baparamset, batimeout); 7571 } 7572 7573 /* 7574 * This function is called by upper layer when an ADDBA response is received 7575 * from another STA. 7576 */ 7577 static int 7578 iwn_ampdu_tx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 7579 uint8_t tid) 7580 { 7581 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; 7582 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7583 struct iwn_ops *ops = &sc->ops; 7584 struct iwn_node *wn = (void *)ni; 7585 struct iwn_node_info node; 7586 int error, qid; 7587 7588 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7589 7590 if (wn->id == IWN_ID_UNDEFINED) 7591 return (0); 7592 7593 /* Enable TX for the specified RA/TID. */ 7594 wn->disable_tid &= ~(1 << tid); 7595 memset(&node, 0, sizeof node); 7596 node.id = wn->id; 7597 node.control = IWN_NODE_UPDATE; 7598 node.flags = IWN_FLAG_SET_DISABLE_TID; 7599 node.disable_tid = htole16(wn->disable_tid); 7600 error = ops->add_node(sc, &node, 1); 7601 if (error != 0) 7602 return 0; 7603 7604 if ((error = iwn_nic_lock(sc)) != 0) 7605 return 0; 7606 qid = *(int *)tap->txa_private; 7607 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: ra=%d tid=%d ssn=%d qid=%d\n", 7608 __func__, wn->id, tid, tap->txa_start, qid); 7609 ops->ampdu_tx_start(sc, ni, qid, tid, tap->txa_start & 0xfff); 7610 iwn_nic_unlock(sc); 7611 7612 iwn_set_link_quality(sc, ni); 7613 return 1; 7614 } 7615 7616 static void 7617 iwn_ampdu_tx_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) 7618 { 7619 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7620 struct iwn_ops *ops = &sc->ops; 7621 uint8_t tid = tap->txa_tid; 7622 int qid; 7623 7624 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7625 7626 sc->sc_addba_stop(ni, tap); 7627 7628 if (tap->txa_private == NULL) 7629 return; 7630 7631 qid = *(int *)tap->txa_private; 7632 if (sc->txq[qid].queued != 0) 7633 return; 7634 if (iwn_nic_lock(sc) != 0) 7635 return; 7636 ops->ampdu_tx_stop(sc, qid, tid, tap->txa_start & 0xfff); 7637 iwn_nic_unlock(sc); 7638 sc->qid2tap[qid] = NULL; 7639 free(tap->txa_private, M_DEVBUF); 7640 tap->txa_private = NULL; 7641 } 7642 7643 static void 7644 iwn4965_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7645 int qid, uint8_t tid, uint16_t ssn) 7646 { 7647 struct iwn_node *wn = (void *)ni; 7648 7649 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7650 7651 /* Stop TX scheduler while we're changing its configuration. */ 7652 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7653 IWN4965_TXQ_STATUS_CHGACT); 7654 7655 /* Assign RA/TID translation to the queue. */ 7656 iwn_mem_write_2(sc, sc->sched_base + IWN4965_SCHED_TRANS_TBL(qid), 7657 wn->id << 4 | tid); 7658 7659 /* Enable chain-building mode for the queue. */ 7660 iwn_prph_setbits(sc, IWN4965_SCHED_QCHAIN_SEL, 1 << qid); 7661 7662 /* Set starting sequence number from the ADDBA request. */ 7663 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7664 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7665 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7666 7667 /* Set scheduler window size. */ 7668 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid), 7669 IWN_SCHED_WINSZ); 7670 /* Set scheduler frame limit. */ 7671 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7672 IWN_SCHED_LIMIT << 16); 7673 7674 /* Enable interrupts for the queue. */ 7675 iwn_prph_setbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7676 7677 /* Mark the queue as active. */ 7678 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7679 IWN4965_TXQ_STATUS_ACTIVE | IWN4965_TXQ_STATUS_AGGR_ENA | 7680 iwn_tid2fifo[tid] << 1); 7681 } 7682 7683 static void 7684 iwn4965_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7685 { 7686 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7687 7688 /* Stop TX scheduler while we're changing its configuration. */ 7689 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7690 IWN4965_TXQ_STATUS_CHGACT); 7691 7692 /* Set starting sequence number from the ADDBA request. */ 7693 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7694 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7695 7696 /* Disable interrupts for the queue. */ 7697 iwn_prph_clrbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7698 7699 /* Mark the queue as inactive. */ 7700 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7701 IWN4965_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid] << 1); 7702 } 7703 7704 static void 7705 iwn5000_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7706 int qid, uint8_t tid, uint16_t ssn) 7707 { 7708 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7709 7710 struct iwn_node *wn = (void *)ni; 7711 7712 /* Stop TX scheduler while we're changing its configuration. */ 7713 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7714 IWN5000_TXQ_STATUS_CHGACT); 7715 7716 /* Assign RA/TID translation to the queue. */ 7717 iwn_mem_write_2(sc, sc->sched_base + IWN5000_SCHED_TRANS_TBL(qid), 7718 wn->id << 4 | tid); 7719 7720 /* Enable chain-building mode for the queue. */ 7721 iwn_prph_setbits(sc, IWN5000_SCHED_QCHAIN_SEL, 1 << qid); 7722 7723 /* Enable aggregation for the queue. */ 7724 iwn_prph_setbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7725 7726 /* Set starting sequence number from the ADDBA request. */ 7727 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7728 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7729 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7730 7731 /* Set scheduler window size and frame limit. */ 7732 iwn_mem_write(sc, sc->sched_base + IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 7733 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 7734 7735 /* Enable interrupts for the queue. */ 7736 iwn_prph_setbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7737 7738 /* Mark the queue as active. */ 7739 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7740 IWN5000_TXQ_STATUS_ACTIVE | iwn_tid2fifo[tid]); 7741 } 7742 7743 static void 7744 iwn5000_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7745 { 7746 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7747 7748 /* Stop TX scheduler while we're changing its configuration. */ 7749 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7750 IWN5000_TXQ_STATUS_CHGACT); 7751 7752 /* Disable aggregation for the queue. */ 7753 iwn_prph_clrbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7754 7755 /* Set starting sequence number from the ADDBA request. */ 7756 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7757 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7758 7759 /* Disable interrupts for the queue. */ 7760 iwn_prph_clrbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7761 7762 /* Mark the queue as inactive. */ 7763 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7764 IWN5000_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid]); 7765 } 7766 7767 /* 7768 * Query calibration tables from the initialization firmware. We do this 7769 * only once at first boot. Called from a process context. 7770 */ 7771 static int 7772 iwn5000_query_calibration(struct iwn_softc *sc) 7773 { 7774 struct iwn5000_calib_config cmd; 7775 int error; 7776 7777 memset(&cmd, 0, sizeof cmd); 7778 cmd.ucode.once.enable = htole32(0xffffffff); 7779 cmd.ucode.once.start = htole32(0xffffffff); 7780 cmd.ucode.once.send = htole32(0xffffffff); 7781 cmd.ucode.flags = htole32(0xffffffff); 7782 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending calibration query\n", 7783 __func__); 7784 error = iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof cmd, 0); 7785 if (error != 0) 7786 return error; 7787 7788 /* Wait at most two seconds for calibration to complete. */ 7789 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) 7790 error = msleep(sc, &sc->sc_mtx, PCATCH, "iwncal", 2 * hz); 7791 return error; 7792 } 7793 7794 /* 7795 * Send calibration results to the runtime firmware. These results were 7796 * obtained on first boot from the initialization firmware. 7797 */ 7798 static int 7799 iwn5000_send_calibration(struct iwn_softc *sc) 7800 { 7801 int idx, error; 7802 7803 for (idx = 0; idx < IWN5000_PHY_CALIB_MAX_RESULT; idx++) { 7804 if (!(sc->base_params->calib_need & (1<<idx))) { 7805 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7806 "No need of calib %d\n", 7807 idx); 7808 continue; /* no need for this calib */ 7809 } 7810 if (sc->calibcmd[idx].buf == NULL) { 7811 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7812 "Need calib idx : %d but no available data\n", 7813 idx); 7814 continue; 7815 } 7816 7817 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7818 "send calibration result idx=%d len=%d\n", idx, 7819 sc->calibcmd[idx].len); 7820 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, sc->calibcmd[idx].buf, 7821 sc->calibcmd[idx].len, 0); 7822 if (error != 0) { 7823 device_printf(sc->sc_dev, 7824 "%s: could not send calibration result, error %d\n", 7825 __func__, error); 7826 return error; 7827 } 7828 } 7829 return 0; 7830 } 7831 7832 static int 7833 iwn5000_send_wimax_coex(struct iwn_softc *sc) 7834 { 7835 struct iwn5000_wimax_coex wimax; 7836 7837 #if 0 7838 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 7839 /* Enable WiMAX coexistence for combo adapters. */ 7840 wimax.flags = 7841 IWN_WIMAX_COEX_ASSOC_WA_UNMASK | 7842 IWN_WIMAX_COEX_UNASSOC_WA_UNMASK | 7843 IWN_WIMAX_COEX_STA_TABLE_VALID | 7844 IWN_WIMAX_COEX_ENABLE; 7845 memcpy(wimax.events, iwn6050_wimax_events, 7846 sizeof iwn6050_wimax_events); 7847 } else 7848 #endif 7849 { 7850 /* Disable WiMAX coexistence. */ 7851 wimax.flags = 0; 7852 memset(wimax.events, 0, sizeof wimax.events); 7853 } 7854 DPRINTF(sc, IWN_DEBUG_RESET, "%s: Configuring WiMAX coexistence\n", 7855 __func__); 7856 return iwn_cmd(sc, IWN5000_CMD_WIMAX_COEX, &wimax, sizeof wimax, 0); 7857 } 7858 7859 static int 7860 iwn5000_crystal_calib(struct iwn_softc *sc) 7861 { 7862 struct iwn5000_phy_calib_crystal cmd; 7863 7864 memset(&cmd, 0, sizeof cmd); 7865 cmd.code = IWN5000_PHY_CALIB_CRYSTAL; 7866 cmd.ngroups = 1; 7867 cmd.isvalid = 1; 7868 cmd.cap_pin[0] = le32toh(sc->eeprom_crystal) & 0xff; 7869 cmd.cap_pin[1] = (le32toh(sc->eeprom_crystal) >> 16) & 0xff; 7870 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "sending crystal calibration %d, %d\n", 7871 cmd.cap_pin[0], cmd.cap_pin[1]); 7872 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7873 } 7874 7875 static int 7876 iwn5000_temp_offset_calib(struct iwn_softc *sc) 7877 { 7878 struct iwn5000_phy_calib_temp_offset cmd; 7879 7880 memset(&cmd, 0, sizeof cmd); 7881 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7882 cmd.ngroups = 1; 7883 cmd.isvalid = 1; 7884 if (sc->eeprom_temp != 0) 7885 cmd.offset = htole16(sc->eeprom_temp); 7886 else 7887 cmd.offset = htole16(IWN_DEFAULT_TEMP_OFFSET); 7888 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "setting radio sensor offset to %d\n", 7889 le16toh(cmd.offset)); 7890 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7891 } 7892 7893 static int 7894 iwn5000_temp_offset_calibv2(struct iwn_softc *sc) 7895 { 7896 struct iwn5000_phy_calib_temp_offsetv2 cmd; 7897 7898 memset(&cmd, 0, sizeof cmd); 7899 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7900 cmd.ngroups = 1; 7901 cmd.isvalid = 1; 7902 if (sc->eeprom_temp != 0) { 7903 cmd.offset_low = htole16(sc->eeprom_temp); 7904 cmd.offset_high = htole16(sc->eeprom_temp_high); 7905 } else { 7906 cmd.offset_low = htole16(IWN_DEFAULT_TEMP_OFFSET); 7907 cmd.offset_high = htole16(IWN_DEFAULT_TEMP_OFFSET); 7908 } 7909 cmd.burnt_voltage_ref = htole16(sc->eeprom_voltage); 7910 7911 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7912 "setting radio sensor low offset to %d, high offset to %d, voltage to %d\n", 7913 le16toh(cmd.offset_low), 7914 le16toh(cmd.offset_high), 7915 le16toh(cmd.burnt_voltage_ref)); 7916 7917 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7918 } 7919 7920 /* 7921 * This function is called after the runtime firmware notifies us of its 7922 * readiness (called in a process context). 7923 */ 7924 static int 7925 iwn4965_post_alive(struct iwn_softc *sc) 7926 { 7927 int error, qid; 7928 7929 if ((error = iwn_nic_lock(sc)) != 0) 7930 return error; 7931 7932 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7933 7934 /* Clear TX scheduler state in SRAM. */ 7935 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7936 iwn_mem_set_region_4(sc, sc->sched_base + IWN4965_SCHED_CTX_OFF, 0, 7937 IWN4965_SCHED_CTX_LEN / sizeof (uint32_t)); 7938 7939 /* Set physical address of TX scheduler rings (1KB aligned). */ 7940 iwn_prph_write(sc, IWN4965_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 7941 7942 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 7943 7944 /* Disable chain mode for all our 16 queues. */ 7945 iwn_prph_write(sc, IWN4965_SCHED_QCHAIN_SEL, 0); 7946 7947 for (qid = 0; qid < IWN4965_NTXQUEUES; qid++) { 7948 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), 0); 7949 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 7950 7951 /* Set scheduler window size. */ 7952 iwn_mem_write(sc, sc->sched_base + 7953 IWN4965_SCHED_QUEUE_OFFSET(qid), IWN_SCHED_WINSZ); 7954 /* Set scheduler frame limit. */ 7955 iwn_mem_write(sc, sc->sched_base + 7956 IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7957 IWN_SCHED_LIMIT << 16); 7958 } 7959 7960 /* Enable interrupts for all our 16 queues. */ 7961 iwn_prph_write(sc, IWN4965_SCHED_INTR_MASK, 0xffff); 7962 /* Identify TX FIFO rings (0-7). */ 7963 iwn_prph_write(sc, IWN4965_SCHED_TXFACT, 0xff); 7964 7965 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7966 for (qid = 0; qid < 7; qid++) { 7967 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 4, 5, 6 }; 7968 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7969 IWN4965_TXQ_STATUS_ACTIVE | qid2fifo[qid] << 1); 7970 } 7971 iwn_nic_unlock(sc); 7972 return 0; 7973 } 7974 7975 /* 7976 * This function is called after the initialization or runtime firmware 7977 * notifies us of its readiness (called in a process context). 7978 */ 7979 static int 7980 iwn5000_post_alive(struct iwn_softc *sc) 7981 { 7982 int error, qid; 7983 7984 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7985 7986 /* Switch to using ICT interrupt mode. */ 7987 iwn5000_ict_reset(sc); 7988 7989 if ((error = iwn_nic_lock(sc)) != 0){ 7990 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 7991 return error; 7992 } 7993 7994 /* Clear TX scheduler state in SRAM. */ 7995 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7996 iwn_mem_set_region_4(sc, sc->sched_base + IWN5000_SCHED_CTX_OFF, 0, 7997 IWN5000_SCHED_CTX_LEN / sizeof (uint32_t)); 7998 7999 /* Set physical address of TX scheduler rings (1KB aligned). */ 8000 iwn_prph_write(sc, IWN5000_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 8001 8002 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 8003 8004 /* Enable chain mode for all queues, except command queue. */ 8005 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 8006 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffdf); 8007 else 8008 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffef); 8009 iwn_prph_write(sc, IWN5000_SCHED_AGGR_SEL, 0); 8010 8011 for (qid = 0; qid < IWN5000_NTXQUEUES; qid++) { 8012 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), 0); 8013 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 8014 8015 iwn_mem_write(sc, sc->sched_base + 8016 IWN5000_SCHED_QUEUE_OFFSET(qid), 0); 8017 /* Set scheduler window size and frame limit. */ 8018 iwn_mem_write(sc, sc->sched_base + 8019 IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 8020 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 8021 } 8022 8023 /* Enable interrupts for all our 20 queues. */ 8024 iwn_prph_write(sc, IWN5000_SCHED_INTR_MASK, 0xfffff); 8025 /* Identify TX FIFO rings (0-7). */ 8026 iwn_prph_write(sc, IWN5000_SCHED_TXFACT, 0xff); 8027 8028 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 8029 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) { 8030 /* Mark TX rings as active. */ 8031 for (qid = 0; qid < 11; qid++) { 8032 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 0, 4, 2, 5, 4, 7, 5 }; 8033 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 8034 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 8035 } 8036 } else { 8037 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 8038 for (qid = 0; qid < 7; qid++) { 8039 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 7, 5, 6 }; 8040 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 8041 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 8042 } 8043 } 8044 iwn_nic_unlock(sc); 8045 8046 /* Configure WiMAX coexistence for combo adapters. */ 8047 error = iwn5000_send_wimax_coex(sc); 8048 if (error != 0) { 8049 device_printf(sc->sc_dev, 8050 "%s: could not configure WiMAX coexistence, error %d\n", 8051 __func__, error); 8052 return error; 8053 } 8054 if (sc->hw_type != IWN_HW_REV_TYPE_5150) { 8055 /* Perform crystal calibration. */ 8056 error = iwn5000_crystal_calib(sc); 8057 if (error != 0) { 8058 device_printf(sc->sc_dev, 8059 "%s: crystal calibration failed, error %d\n", 8060 __func__, error); 8061 return error; 8062 } 8063 } 8064 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) { 8065 /* Query calibration from the initialization firmware. */ 8066 if ((error = iwn5000_query_calibration(sc)) != 0) { 8067 device_printf(sc->sc_dev, 8068 "%s: could not query calibration, error %d\n", 8069 __func__, error); 8070 return error; 8071 } 8072 /* 8073 * We have the calibration results now, reboot with the 8074 * runtime firmware (call ourselves recursively!) 8075 */ 8076 iwn_hw_stop(sc); 8077 error = iwn_hw_init(sc); 8078 } else { 8079 /* Send calibration results to runtime firmware. */ 8080 error = iwn5000_send_calibration(sc); 8081 } 8082 8083 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8084 8085 return error; 8086 } 8087 8088 /* 8089 * The firmware boot code is small and is intended to be copied directly into 8090 * the NIC internal memory (no DMA transfer). 8091 */ 8092 static int 8093 iwn4965_load_bootcode(struct iwn_softc *sc, const uint8_t *ucode, int size) 8094 { 8095 int error, ntries; 8096 8097 size /= sizeof (uint32_t); 8098 8099 if ((error = iwn_nic_lock(sc)) != 0) 8100 return error; 8101 8102 /* Copy microcode image into NIC memory. */ 8103 iwn_prph_write_region_4(sc, IWN_BSM_SRAM_BASE, 8104 (const uint32_t *)ucode, size); 8105 8106 iwn_prph_write(sc, IWN_BSM_WR_MEM_SRC, 0); 8107 iwn_prph_write(sc, IWN_BSM_WR_MEM_DST, IWN_FW_TEXT_BASE); 8108 iwn_prph_write(sc, IWN_BSM_WR_DWCOUNT, size); 8109 8110 /* Start boot load now. */ 8111 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START); 8112 8113 /* Wait for transfer to complete. */ 8114 for (ntries = 0; ntries < 1000; ntries++) { 8115 if (!(iwn_prph_read(sc, IWN_BSM_WR_CTRL) & 8116 IWN_BSM_WR_CTRL_START)) 8117 break; 8118 DELAY(10); 8119 } 8120 if (ntries == 1000) { 8121 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 8122 __func__); 8123 iwn_nic_unlock(sc); 8124 return ETIMEDOUT; 8125 } 8126 8127 /* Enable boot after power up. */ 8128 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START_EN); 8129 8130 iwn_nic_unlock(sc); 8131 return 0; 8132 } 8133 8134 static int 8135 iwn4965_load_firmware(struct iwn_softc *sc) 8136 { 8137 struct iwn_fw_info *fw = &sc->fw; 8138 struct iwn_dma_info *dma = &sc->fw_dma; 8139 int error; 8140 8141 /* Copy initialization sections into pre-allocated DMA-safe memory. */ 8142 memcpy(dma->vaddr, fw->init.data, fw->init.datasz); 8143 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8144 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 8145 fw->init.text, fw->init.textsz); 8146 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8147 8148 /* Tell adapter where to find initialization sections. */ 8149 if ((error = iwn_nic_lock(sc)) != 0) 8150 return error; 8151 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 8152 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->init.datasz); 8153 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 8154 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 8155 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, fw->init.textsz); 8156 iwn_nic_unlock(sc); 8157 8158 /* Load firmware boot code. */ 8159 error = iwn4965_load_bootcode(sc, fw->boot.text, fw->boot.textsz); 8160 if (error != 0) { 8161 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 8162 __func__); 8163 return error; 8164 } 8165 /* Now press "execute". */ 8166 IWN_WRITE(sc, IWN_RESET, 0); 8167 8168 /* Wait at most one second for first alive notification. */ 8169 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) { 8170 device_printf(sc->sc_dev, 8171 "%s: timeout waiting for adapter to initialize, error %d\n", 8172 __func__, error); 8173 return error; 8174 } 8175 8176 /* Retrieve current temperature for initial TX power calibration. */ 8177 sc->rawtemp = sc->ucode_info.temp[3].chan20MHz; 8178 sc->temp = iwn4965_get_temperature(sc); 8179 8180 /* Copy runtime sections into pre-allocated DMA-safe memory. */ 8181 memcpy(dma->vaddr, fw->main.data, fw->main.datasz); 8182 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8183 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 8184 fw->main.text, fw->main.textsz); 8185 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8186 8187 /* Tell adapter where to find runtime sections. */ 8188 if ((error = iwn_nic_lock(sc)) != 0) 8189 return error; 8190 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 8191 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->main.datasz); 8192 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 8193 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 8194 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, 8195 IWN_FW_UPDATED | fw->main.textsz); 8196 iwn_nic_unlock(sc); 8197 8198 return 0; 8199 } 8200 8201 static int 8202 iwn5000_load_firmware_section(struct iwn_softc *sc, uint32_t dst, 8203 const uint8_t *section, int size) 8204 { 8205 struct iwn_dma_info *dma = &sc->fw_dma; 8206 int error; 8207 8208 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8209 8210 /* Copy firmware section into pre-allocated DMA-safe memory. */ 8211 memcpy(dma->vaddr, section, size); 8212 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 8213 8214 if ((error = iwn_nic_lock(sc)) != 0) 8215 return error; 8216 8217 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 8218 IWN_FH_TX_CONFIG_DMA_PAUSE); 8219 8220 IWN_WRITE(sc, IWN_FH_SRAM_ADDR(IWN_SRVC_DMACHNL), dst); 8221 IWN_WRITE(sc, IWN_FH_TFBD_CTRL0(IWN_SRVC_DMACHNL), 8222 IWN_LOADDR(dma->paddr)); 8223 IWN_WRITE(sc, IWN_FH_TFBD_CTRL1(IWN_SRVC_DMACHNL), 8224 IWN_HIADDR(dma->paddr) << 28 | size); 8225 IWN_WRITE(sc, IWN_FH_TXBUF_STATUS(IWN_SRVC_DMACHNL), 8226 IWN_FH_TXBUF_STATUS_TBNUM(1) | 8227 IWN_FH_TXBUF_STATUS_TBIDX(1) | 8228 IWN_FH_TXBUF_STATUS_TFBD_VALID); 8229 8230 /* Kick Flow Handler to start DMA transfer. */ 8231 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 8232 IWN_FH_TX_CONFIG_DMA_ENA | IWN_FH_TX_CONFIG_CIRQ_HOST_ENDTFD); 8233 8234 iwn_nic_unlock(sc); 8235 8236 /* Wait at most five seconds for FH DMA transfer to complete. */ 8237 return msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", 5 * hz); 8238 } 8239 8240 static int 8241 iwn5000_load_firmware(struct iwn_softc *sc) 8242 { 8243 struct iwn_fw_part *fw; 8244 int error; 8245 8246 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8247 8248 /* Load the initialization firmware on first boot only. */ 8249 fw = (sc->sc_flags & IWN_FLAG_CALIB_DONE) ? 8250 &sc->fw.main : &sc->fw.init; 8251 8252 error = iwn5000_load_firmware_section(sc, IWN_FW_TEXT_BASE, 8253 fw->text, fw->textsz); 8254 if (error != 0) { 8255 device_printf(sc->sc_dev, 8256 "%s: could not load firmware %s section, error %d\n", 8257 __func__, ".text", error); 8258 return error; 8259 } 8260 error = iwn5000_load_firmware_section(sc, IWN_FW_DATA_BASE, 8261 fw->data, fw->datasz); 8262 if (error != 0) { 8263 device_printf(sc->sc_dev, 8264 "%s: could not load firmware %s section, error %d\n", 8265 __func__, ".data", error); 8266 return error; 8267 } 8268 8269 /* Now press "execute". */ 8270 IWN_WRITE(sc, IWN_RESET, 0); 8271 return 0; 8272 } 8273 8274 /* 8275 * Extract text and data sections from a legacy firmware image. 8276 */ 8277 static int 8278 iwn_read_firmware_leg(struct iwn_softc *sc, struct iwn_fw_info *fw) 8279 { 8280 const uint32_t *ptr; 8281 size_t hdrlen = 24; 8282 uint32_t rev; 8283 8284 ptr = (const uint32_t *)fw->data; 8285 rev = le32toh(*ptr++); 8286 8287 sc->ucode_rev = rev; 8288 8289 /* Check firmware API version. */ 8290 if (IWN_FW_API(rev) <= 1) { 8291 device_printf(sc->sc_dev, 8292 "%s: bad firmware, need API version >=2\n", __func__); 8293 return EINVAL; 8294 } 8295 if (IWN_FW_API(rev) >= 3) { 8296 /* Skip build number (version 2 header). */ 8297 hdrlen += 4; 8298 ptr++; 8299 } 8300 if (fw->size < hdrlen) { 8301 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8302 __func__, fw->size); 8303 return EINVAL; 8304 } 8305 fw->main.textsz = le32toh(*ptr++); 8306 fw->main.datasz = le32toh(*ptr++); 8307 fw->init.textsz = le32toh(*ptr++); 8308 fw->init.datasz = le32toh(*ptr++); 8309 fw->boot.textsz = le32toh(*ptr++); 8310 8311 /* Check that all firmware sections fit. */ 8312 if (fw->size < hdrlen + fw->main.textsz + fw->main.datasz + 8313 fw->init.textsz + fw->init.datasz + fw->boot.textsz) { 8314 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8315 __func__, fw->size); 8316 return EINVAL; 8317 } 8318 8319 /* Get pointers to firmware sections. */ 8320 fw->main.text = (const uint8_t *)ptr; 8321 fw->main.data = fw->main.text + fw->main.textsz; 8322 fw->init.text = fw->main.data + fw->main.datasz; 8323 fw->init.data = fw->init.text + fw->init.textsz; 8324 fw->boot.text = fw->init.data + fw->init.datasz; 8325 return 0; 8326 } 8327 8328 /* 8329 * Extract text and data sections from a TLV firmware image. 8330 */ 8331 static int 8332 iwn_read_firmware_tlv(struct iwn_softc *sc, struct iwn_fw_info *fw, 8333 uint16_t alt) 8334 { 8335 const struct iwn_fw_tlv_hdr *hdr; 8336 const struct iwn_fw_tlv *tlv; 8337 const uint8_t *ptr, *end; 8338 uint64_t altmask; 8339 uint32_t len, tmp; 8340 8341 if (fw->size < sizeof (*hdr)) { 8342 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8343 __func__, fw->size); 8344 return EINVAL; 8345 } 8346 hdr = (const struct iwn_fw_tlv_hdr *)fw->data; 8347 if (hdr->signature != htole32(IWN_FW_SIGNATURE)) { 8348 device_printf(sc->sc_dev, "%s: bad firmware signature 0x%08x\n", 8349 __func__, le32toh(hdr->signature)); 8350 return EINVAL; 8351 } 8352 DPRINTF(sc, IWN_DEBUG_RESET, "FW: \"%.64s\", build 0x%x\n", hdr->descr, 8353 le32toh(hdr->build)); 8354 sc->ucode_rev = le32toh(hdr->rev); 8355 8356 /* 8357 * Select the closest supported alternative that is less than 8358 * or equal to the specified one. 8359 */ 8360 altmask = le64toh(hdr->altmask); 8361 while (alt > 0 && !(altmask & (1ULL << alt))) 8362 alt--; /* Downgrade. */ 8363 DPRINTF(sc, IWN_DEBUG_RESET, "using alternative %d\n", alt); 8364 8365 ptr = (const uint8_t *)(hdr + 1); 8366 end = (const uint8_t *)(fw->data + fw->size); 8367 8368 /* Parse type-length-value fields. */ 8369 while (ptr + sizeof (*tlv) <= end) { 8370 tlv = (const struct iwn_fw_tlv *)ptr; 8371 len = le32toh(tlv->len); 8372 8373 ptr += sizeof (*tlv); 8374 if (ptr + len > end) { 8375 device_printf(sc->sc_dev, 8376 "%s: firmware too short: %zu bytes\n", __func__, 8377 fw->size); 8378 return EINVAL; 8379 } 8380 /* Skip other alternatives. */ 8381 if (tlv->alt != 0 && tlv->alt != htole16(alt)) 8382 goto next; 8383 8384 switch (le16toh(tlv->type)) { 8385 case IWN_FW_TLV_MAIN_TEXT: 8386 fw->main.text = ptr; 8387 fw->main.textsz = len; 8388 break; 8389 case IWN_FW_TLV_MAIN_DATA: 8390 fw->main.data = ptr; 8391 fw->main.datasz = len; 8392 break; 8393 case IWN_FW_TLV_INIT_TEXT: 8394 fw->init.text = ptr; 8395 fw->init.textsz = len; 8396 break; 8397 case IWN_FW_TLV_INIT_DATA: 8398 fw->init.data = ptr; 8399 fw->init.datasz = len; 8400 break; 8401 case IWN_FW_TLV_BOOT_TEXT: 8402 fw->boot.text = ptr; 8403 fw->boot.textsz = len; 8404 break; 8405 case IWN_FW_TLV_ENH_SENS: 8406 if (!len) 8407 sc->sc_flags |= IWN_FLAG_ENH_SENS; 8408 break; 8409 case IWN_FW_TLV_PHY_CALIB: 8410 tmp = le32toh(*ptr); 8411 if (tmp < 253) { 8412 sc->reset_noise_gain = tmp; 8413 sc->noise_gain = tmp + 1; 8414 } 8415 break; 8416 case IWN_FW_TLV_PAN: 8417 sc->sc_flags |= IWN_FLAG_PAN_SUPPORT; 8418 DPRINTF(sc, IWN_DEBUG_RESET, 8419 "PAN Support found: %d\n", 1); 8420 break; 8421 case IWN_FW_TLV_FLAGS: 8422 if (len < sizeof(uint32_t)) 8423 break; 8424 if (len % sizeof(uint32_t)) 8425 break; 8426 sc->tlv_feature_flags = le32toh(*ptr); 8427 DPRINTF(sc, IWN_DEBUG_RESET, 8428 "%s: feature: 0x%08x\n", 8429 __func__, 8430 sc->tlv_feature_flags); 8431 break; 8432 case IWN_FW_TLV_PBREQ_MAXLEN: 8433 case IWN_FW_TLV_RUNT_EVTLOG_PTR: 8434 case IWN_FW_TLV_RUNT_EVTLOG_SIZE: 8435 case IWN_FW_TLV_RUNT_ERRLOG_PTR: 8436 case IWN_FW_TLV_INIT_EVTLOG_PTR: 8437 case IWN_FW_TLV_INIT_EVTLOG_SIZE: 8438 case IWN_FW_TLV_INIT_ERRLOG_PTR: 8439 case IWN_FW_TLV_WOWLAN_INST: 8440 case IWN_FW_TLV_WOWLAN_DATA: 8441 DPRINTF(sc, IWN_DEBUG_RESET, 8442 "TLV type %d recognized but not handled\n", 8443 le16toh(tlv->type)); 8444 break; 8445 default: 8446 DPRINTF(sc, IWN_DEBUG_RESET, 8447 "TLV type %d not handled\n", le16toh(tlv->type)); 8448 break; 8449 } 8450 next: /* TLV fields are 32-bit aligned. */ 8451 ptr += (len + 3) & ~3; 8452 } 8453 return 0; 8454 } 8455 8456 static int 8457 iwn_read_firmware(struct iwn_softc *sc) 8458 { 8459 struct iwn_fw_info *fw = &sc->fw; 8460 int error; 8461 8462 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8463 8464 IWN_UNLOCK(sc); 8465 8466 memset(fw, 0, sizeof (*fw)); 8467 8468 /* Read firmware image from filesystem. */ 8469 sc->fw_fp = firmware_get(sc->fwname); 8470 if (sc->fw_fp == NULL) { 8471 device_printf(sc->sc_dev, "%s: could not read firmware %s\n", 8472 __func__, sc->fwname); 8473 IWN_LOCK(sc); 8474 return EINVAL; 8475 } 8476 IWN_LOCK(sc); 8477 8478 fw->size = sc->fw_fp->datasize; 8479 fw->data = (const uint8_t *)sc->fw_fp->data; 8480 if (fw->size < sizeof (uint32_t)) { 8481 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8482 __func__, fw->size); 8483 error = EINVAL; 8484 goto fail; 8485 } 8486 8487 /* Retrieve text and data sections. */ 8488 if (*(const uint32_t *)fw->data != 0) /* Legacy image. */ 8489 error = iwn_read_firmware_leg(sc, fw); 8490 else 8491 error = iwn_read_firmware_tlv(sc, fw, 1); 8492 if (error != 0) { 8493 device_printf(sc->sc_dev, 8494 "%s: could not read firmware sections, error %d\n", 8495 __func__, error); 8496 goto fail; 8497 } 8498 8499 device_printf(sc->sc_dev, "%s: ucode rev=0x%08x\n", __func__, sc->ucode_rev); 8500 8501 /* Make sure text and data sections fit in hardware memory. */ 8502 if (fw->main.textsz > sc->fw_text_maxsz || 8503 fw->main.datasz > sc->fw_data_maxsz || 8504 fw->init.textsz > sc->fw_text_maxsz || 8505 fw->init.datasz > sc->fw_data_maxsz || 8506 fw->boot.textsz > IWN_FW_BOOT_TEXT_MAXSZ || 8507 (fw->boot.textsz & 3) != 0) { 8508 device_printf(sc->sc_dev, "%s: firmware sections too large\n", 8509 __func__); 8510 error = EINVAL; 8511 goto fail; 8512 } 8513 8514 /* We can proceed with loading the firmware. */ 8515 return 0; 8516 8517 fail: iwn_unload_firmware(sc); 8518 return error; 8519 } 8520 8521 static void 8522 iwn_unload_firmware(struct iwn_softc *sc) 8523 { 8524 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8525 sc->fw_fp = NULL; 8526 } 8527 8528 static int 8529 iwn_clock_wait(struct iwn_softc *sc) 8530 { 8531 int ntries; 8532 8533 /* Set "initialization complete" bit. */ 8534 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8535 8536 /* Wait for clock stabilization. */ 8537 for (ntries = 0; ntries < 2500; ntries++) { 8538 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_MAC_CLOCK_READY) 8539 return 0; 8540 DELAY(10); 8541 } 8542 device_printf(sc->sc_dev, 8543 "%s: timeout waiting for clock stabilization\n", __func__); 8544 return ETIMEDOUT; 8545 } 8546 8547 static int 8548 iwn_apm_init(struct iwn_softc *sc) 8549 { 8550 uint32_t reg; 8551 int error; 8552 8553 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8554 8555 /* Disable L0s exit timer (NMI bug workaround). */ 8556 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_DIS_L0S_TIMER); 8557 /* Don't wait for ICH L0s (ICH bug workaround). */ 8558 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_L1A_NO_L0S_RX); 8559 8560 /* Set FH wait threshold to max (HW bug under stress workaround). */ 8561 IWN_SETBITS(sc, IWN_DBG_HPET_MEM, 0xffff0000); 8562 8563 /* Enable HAP INTA to move adapter from L1a to L0s. */ 8564 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_HAP_WAKE_L1A); 8565 8566 /* Retrieve PCIe Active State Power Management (ASPM). */ 8567 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + PCIER_LINK_CTL, 4); 8568 /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */ 8569 if (reg & PCIEM_LINK_CTL_ASPMC_L1) /* L1 Entry enabled. */ 8570 IWN_SETBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8571 else 8572 IWN_CLRBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8573 8574 if (sc->base_params->pll_cfg_val) 8575 IWN_SETBITS(sc, IWN_ANA_PLL, sc->base_params->pll_cfg_val); 8576 8577 /* Wait for clock stabilization before accessing prph. */ 8578 if ((error = iwn_clock_wait(sc)) != 0) 8579 return error; 8580 8581 if ((error = iwn_nic_lock(sc)) != 0) 8582 return error; 8583 if (sc->hw_type == IWN_HW_REV_TYPE_4965) { 8584 /* Enable DMA and BSM (Bootstrap State Machine). */ 8585 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8586 IWN_APMG_CLK_CTRL_DMA_CLK_RQT | 8587 IWN_APMG_CLK_CTRL_BSM_CLK_RQT); 8588 } else { 8589 /* Enable DMA. */ 8590 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8591 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8592 } 8593 DELAY(20); 8594 /* Disable L1-Active. */ 8595 iwn_prph_setbits(sc, IWN_APMG_PCI_STT, IWN_APMG_PCI_STT_L1A_DIS); 8596 iwn_nic_unlock(sc); 8597 8598 return 0; 8599 } 8600 8601 static void 8602 iwn_apm_stop_master(struct iwn_softc *sc) 8603 { 8604 int ntries; 8605 8606 /* Stop busmaster DMA activity. */ 8607 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_STOP_MASTER); 8608 for (ntries = 0; ntries < 100; ntries++) { 8609 if (IWN_READ(sc, IWN_RESET) & IWN_RESET_MASTER_DISABLED) 8610 return; 8611 DELAY(10); 8612 } 8613 device_printf(sc->sc_dev, "%s: timeout waiting for master\n", __func__); 8614 } 8615 8616 static void 8617 iwn_apm_stop(struct iwn_softc *sc) 8618 { 8619 iwn_apm_stop_master(sc); 8620 8621 /* Reset the entire device. */ 8622 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_SW); 8623 DELAY(10); 8624 /* Clear "initialization complete" bit. */ 8625 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8626 } 8627 8628 static int 8629 iwn4965_nic_config(struct iwn_softc *sc) 8630 { 8631 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8632 8633 if (IWN_RFCFG_TYPE(sc->rfcfg) == 1) { 8634 /* 8635 * I don't believe this to be correct but this is what the 8636 * vendor driver is doing. Probably the bits should not be 8637 * shifted in IWN_RFCFG_*. 8638 */ 8639 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8640 IWN_RFCFG_TYPE(sc->rfcfg) | 8641 IWN_RFCFG_STEP(sc->rfcfg) | 8642 IWN_RFCFG_DASH(sc->rfcfg)); 8643 } 8644 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8645 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8646 return 0; 8647 } 8648 8649 static int 8650 iwn5000_nic_config(struct iwn_softc *sc) 8651 { 8652 uint32_t tmp; 8653 int error; 8654 8655 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8656 8657 if (IWN_RFCFG_TYPE(sc->rfcfg) < 3) { 8658 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8659 IWN_RFCFG_TYPE(sc->rfcfg) | 8660 IWN_RFCFG_STEP(sc->rfcfg) | 8661 IWN_RFCFG_DASH(sc->rfcfg)); 8662 } 8663 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8664 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8665 8666 if ((error = iwn_nic_lock(sc)) != 0) 8667 return error; 8668 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_EARLY_PWROFF_DIS); 8669 8670 if (sc->hw_type == IWN_HW_REV_TYPE_1000) { 8671 /* 8672 * Select first Switching Voltage Regulator (1.32V) to 8673 * solve a stability issue related to noisy DC2DC line 8674 * in the silicon of 1000 Series. 8675 */ 8676 tmp = iwn_prph_read(sc, IWN_APMG_DIGITAL_SVR); 8677 tmp &= ~IWN_APMG_DIGITAL_SVR_VOLTAGE_MASK; 8678 tmp |= IWN_APMG_DIGITAL_SVR_VOLTAGE_1_32; 8679 iwn_prph_write(sc, IWN_APMG_DIGITAL_SVR, tmp); 8680 } 8681 iwn_nic_unlock(sc); 8682 8683 if (sc->sc_flags & IWN_FLAG_INTERNAL_PA) { 8684 /* Use internal power amplifier only. */ 8685 IWN_WRITE(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_2X2_IPA); 8686 } 8687 if (sc->base_params->additional_nic_config && sc->calib_ver >= 6) { 8688 /* Indicate that ROM calibration version is >=6. */ 8689 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_CALIB_VER6); 8690 } 8691 if (sc->base_params->additional_gp_drv_bit) 8692 IWN_SETBITS(sc, IWN_GP_DRIVER, 8693 sc->base_params->additional_gp_drv_bit); 8694 return 0; 8695 } 8696 8697 /* 8698 * Take NIC ownership over Intel Active Management Technology (AMT). 8699 */ 8700 static int 8701 iwn_hw_prepare(struct iwn_softc *sc) 8702 { 8703 int ntries; 8704 8705 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8706 8707 /* Check if hardware is ready. */ 8708 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8709 for (ntries = 0; ntries < 5; ntries++) { 8710 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8711 IWN_HW_IF_CONFIG_NIC_READY) 8712 return 0; 8713 DELAY(10); 8714 } 8715 8716 /* Hardware not ready, force into ready state. */ 8717 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_PREPARE); 8718 for (ntries = 0; ntries < 15000; ntries++) { 8719 if (!(IWN_READ(sc, IWN_HW_IF_CONFIG) & 8720 IWN_HW_IF_CONFIG_PREPARE_DONE)) 8721 break; 8722 DELAY(10); 8723 } 8724 if (ntries == 15000) 8725 return ETIMEDOUT; 8726 8727 /* Hardware should be ready now. */ 8728 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8729 for (ntries = 0; ntries < 5; ntries++) { 8730 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8731 IWN_HW_IF_CONFIG_NIC_READY) 8732 return 0; 8733 DELAY(10); 8734 } 8735 return ETIMEDOUT; 8736 } 8737 8738 static int 8739 iwn_hw_init(struct iwn_softc *sc) 8740 { 8741 struct iwn_ops *ops = &sc->ops; 8742 int error, chnl, qid; 8743 8744 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8745 8746 /* Clear pending interrupts. */ 8747 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8748 8749 if ((error = iwn_apm_init(sc)) != 0) { 8750 device_printf(sc->sc_dev, 8751 "%s: could not power ON adapter, error %d\n", __func__, 8752 error); 8753 return error; 8754 } 8755 8756 /* Select VMAIN power source. */ 8757 if ((error = iwn_nic_lock(sc)) != 0) 8758 return error; 8759 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_PWR_SRC_MASK); 8760 iwn_nic_unlock(sc); 8761 8762 /* Perform adapter-specific initialization. */ 8763 if ((error = ops->nic_config(sc)) != 0) 8764 return error; 8765 8766 /* Initialize RX ring. */ 8767 if ((error = iwn_nic_lock(sc)) != 0) 8768 return error; 8769 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 8770 IWN_WRITE(sc, IWN_FH_RX_WPTR, 0); 8771 /* Set physical address of RX ring (256-byte aligned). */ 8772 IWN_WRITE(sc, IWN_FH_RX_BASE, sc->rxq.desc_dma.paddr >> 8); 8773 /* Set physical address of RX status (16-byte aligned). */ 8774 IWN_WRITE(sc, IWN_FH_STATUS_WPTR, sc->rxq.stat_dma.paddr >> 4); 8775 /* Enable RX. */ 8776 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 8777 IWN_FH_RX_CONFIG_ENA | 8778 IWN_FH_RX_CONFIG_IGN_RXF_EMPTY | /* HW bug workaround */ 8779 IWN_FH_RX_CONFIG_IRQ_DST_HOST | 8780 IWN_FH_RX_CONFIG_SINGLE_FRAME | 8781 IWN_FH_RX_CONFIG_RB_TIMEOUT(0) | 8782 IWN_FH_RX_CONFIG_NRBD(IWN_RX_RING_COUNT_LOG)); 8783 iwn_nic_unlock(sc); 8784 IWN_WRITE(sc, IWN_FH_RX_WPTR, (IWN_RX_RING_COUNT - 1) & ~7); 8785 8786 if ((error = iwn_nic_lock(sc)) != 0) 8787 return error; 8788 8789 /* Initialize TX scheduler. */ 8790 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8791 8792 /* Set physical address of "keep warm" page (16-byte aligned). */ 8793 IWN_WRITE(sc, IWN_FH_KW_ADDR, sc->kw_dma.paddr >> 4); 8794 8795 /* Initialize TX rings. */ 8796 for (qid = 0; qid < sc->ntxqs; qid++) { 8797 struct iwn_tx_ring *txq = &sc->txq[qid]; 8798 8799 /* Set physical address of TX ring (256-byte aligned). */ 8800 IWN_WRITE(sc, IWN_FH_CBBC_QUEUE(qid), 8801 txq->desc_dma.paddr >> 8); 8802 } 8803 iwn_nic_unlock(sc); 8804 8805 /* Enable DMA channels. */ 8806 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8807 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 8808 IWN_FH_TX_CONFIG_DMA_ENA | 8809 IWN_FH_TX_CONFIG_DMA_CREDIT_ENA); 8810 } 8811 8812 /* Clear "radio off" and "commands blocked" bits. */ 8813 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8814 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CMD_BLOCKED); 8815 8816 /* Clear pending interrupts. */ 8817 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8818 /* Enable interrupt coalescing. */ 8819 IWN_WRITE(sc, IWN_INT_COALESCING, 512 / 8); 8820 /* Enable interrupts. */ 8821 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8822 8823 /* _Really_ make sure "radio off" bit is cleared! */ 8824 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8825 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8826 8827 /* Enable shadow registers. */ 8828 if (sc->base_params->shadow_reg_enable) 8829 IWN_SETBITS(sc, IWN_SHADOW_REG_CTRL, 0x800fffff); 8830 8831 if ((error = ops->load_firmware(sc)) != 0) { 8832 device_printf(sc->sc_dev, 8833 "%s: could not load firmware, error %d\n", __func__, 8834 error); 8835 return error; 8836 } 8837 /* Wait at most one second for firmware alive notification. */ 8838 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) { 8839 device_printf(sc->sc_dev, 8840 "%s: timeout waiting for adapter to initialize, error %d\n", 8841 __func__, error); 8842 return error; 8843 } 8844 /* Do post-firmware initialization. */ 8845 8846 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8847 8848 return ops->post_alive(sc); 8849 } 8850 8851 static void 8852 iwn_hw_stop(struct iwn_softc *sc) 8853 { 8854 int chnl, qid, ntries; 8855 8856 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8857 8858 IWN_WRITE(sc, IWN_RESET, IWN_RESET_NEVO); 8859 8860 /* Disable interrupts. */ 8861 IWN_WRITE(sc, IWN_INT_MASK, 0); 8862 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8863 IWN_WRITE(sc, IWN_FH_INT, 0xffffffff); 8864 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8865 8866 /* Make sure we no longer hold the NIC lock. */ 8867 iwn_nic_unlock(sc); 8868 8869 /* Stop TX scheduler. */ 8870 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8871 8872 /* Stop all DMA channels. */ 8873 if (iwn_nic_lock(sc) == 0) { 8874 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8875 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 0); 8876 for (ntries = 0; ntries < 200; ntries++) { 8877 if (IWN_READ(sc, IWN_FH_TX_STATUS) & 8878 IWN_FH_TX_STATUS_IDLE(chnl)) 8879 break; 8880 DELAY(10); 8881 } 8882 } 8883 iwn_nic_unlock(sc); 8884 } 8885 8886 /* Stop RX ring. */ 8887 iwn_reset_rx_ring(sc, &sc->rxq); 8888 8889 /* Reset all TX rings. */ 8890 for (qid = 0; qid < sc->ntxqs; qid++) 8891 iwn_reset_tx_ring(sc, &sc->txq[qid]); 8892 8893 if (iwn_nic_lock(sc) == 0) { 8894 iwn_prph_write(sc, IWN_APMG_CLK_DIS, 8895 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8896 iwn_nic_unlock(sc); 8897 } 8898 DELAY(5); 8899 /* Power OFF adapter. */ 8900 iwn_apm_stop(sc); 8901 } 8902 8903 static void 8904 iwn_panicked(void *arg0, int pending) 8905 { 8906 struct iwn_softc *sc = arg0; 8907 struct ieee80211com *ic = &sc->sc_ic; 8908 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8909 #if 0 8910 int error; 8911 #endif 8912 8913 if (vap == NULL) { 8914 printf("%s: null vap\n", __func__); 8915 return; 8916 } 8917 8918 device_printf(sc->sc_dev, "%s: controller panicked, iv_state = %d; " 8919 "restarting\n", __func__, vap->iv_state); 8920 8921 /* 8922 * This is not enough work. We need to also reinitialise 8923 * the correct transmit state for aggregation enabled queues, 8924 * which has a very specific requirement of 8925 * ring index = 802.11 seqno % 256. If we don't do this (which 8926 * we definitely don't!) then the firmware will just panic again. 8927 */ 8928 #if 1 8929 ieee80211_restart_all(ic); 8930 #else 8931 IWN_LOCK(sc); 8932 8933 iwn_stop_locked(sc); 8934 if ((error = iwn_init_locked(sc)) != 0) { 8935 device_printf(sc->sc_dev, 8936 "%s: could not init hardware\n", __func__); 8937 goto unlock; 8938 } 8939 if (vap->iv_state >= IEEE80211_S_AUTH && 8940 (error = iwn_auth(sc, vap)) != 0) { 8941 device_printf(sc->sc_dev, 8942 "%s: could not move to auth state\n", __func__); 8943 } 8944 if (vap->iv_state >= IEEE80211_S_RUN && 8945 (error = iwn_run(sc, vap)) != 0) { 8946 device_printf(sc->sc_dev, 8947 "%s: could not move to run state\n", __func__); 8948 } 8949 8950 unlock: 8951 IWN_UNLOCK(sc); 8952 #endif 8953 } 8954 8955 static int 8956 iwn_init_locked(struct iwn_softc *sc) 8957 { 8958 int error; 8959 8960 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8961 8962 IWN_LOCK_ASSERT(sc); 8963 8964 if (sc->sc_flags & IWN_FLAG_RUNNING) 8965 goto end; 8966 8967 sc->sc_flags |= IWN_FLAG_RUNNING; 8968 8969 if ((error = iwn_hw_prepare(sc)) != 0) { 8970 device_printf(sc->sc_dev, "%s: hardware not ready, error %d\n", 8971 __func__, error); 8972 goto fail; 8973 } 8974 8975 /* Initialize interrupt mask to default value. */ 8976 sc->int_mask = IWN_INT_MASK_DEF; 8977 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8978 8979 /* Check that the radio is not disabled by hardware switch. */ 8980 if (!(IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL)) { 8981 iwn_stop_locked(sc); 8982 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8983 8984 return (1); 8985 } 8986 8987 /* Read firmware images from the filesystem. */ 8988 if ((error = iwn_read_firmware(sc)) != 0) { 8989 device_printf(sc->sc_dev, 8990 "%s: could not read firmware, error %d\n", __func__, 8991 error); 8992 goto fail; 8993 } 8994 8995 /* Initialize hardware and upload firmware. */ 8996 error = iwn_hw_init(sc); 8997 iwn_unload_firmware(sc); 8998 if (error != 0) { 8999 device_printf(sc->sc_dev, 9000 "%s: could not initialize hardware, error %d\n", __func__, 9001 error); 9002 goto fail; 9003 } 9004 9005 /* Configure adapter now that it is ready. */ 9006 if ((error = iwn_config(sc)) != 0) { 9007 device_printf(sc->sc_dev, 9008 "%s: could not configure device, error %d\n", __func__, 9009 error); 9010 goto fail; 9011 } 9012 9013 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 9014 9015 end: 9016 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 9017 9018 return (0); 9019 9020 fail: 9021 iwn_stop_locked(sc); 9022 9023 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 9024 9025 return (-1); 9026 } 9027 9028 static int 9029 iwn_init(struct iwn_softc *sc) 9030 { 9031 int error; 9032 9033 IWN_LOCK(sc); 9034 error = iwn_init_locked(sc); 9035 IWN_UNLOCK(sc); 9036 9037 return (error); 9038 } 9039 9040 static void 9041 iwn_stop_locked(struct iwn_softc *sc) 9042 { 9043 9044 IWN_LOCK_ASSERT(sc); 9045 9046 if (!(sc->sc_flags & IWN_FLAG_RUNNING)) 9047 return; 9048 9049 sc->sc_is_scanning = 0; 9050 sc->sc_tx_timer = 0; 9051 callout_stop(&sc->watchdog_to); 9052 callout_stop(&sc->scan_timeout); 9053 callout_stop(&sc->calib_to); 9054 sc->sc_flags &= ~IWN_FLAG_RUNNING; 9055 9056 /* Power OFF hardware. */ 9057 iwn_hw_stop(sc); 9058 } 9059 9060 static void 9061 iwn_stop(struct iwn_softc *sc) 9062 { 9063 IWN_LOCK(sc); 9064 iwn_stop_locked(sc); 9065 IWN_UNLOCK(sc); 9066 } 9067 9068 /* 9069 * Callback from net80211 to start a scan. 9070 */ 9071 static void 9072 iwn_scan_start(struct ieee80211com *ic) 9073 { 9074 struct iwn_softc *sc = ic->ic_softc; 9075 9076 IWN_LOCK(sc); 9077 /* make the link LED blink while we're scanning */ 9078 iwn_set_led(sc, IWN_LED_LINK, 20, 2); 9079 IWN_UNLOCK(sc); 9080 } 9081 9082 /* 9083 * Callback from net80211 to terminate a scan. 9084 */ 9085 static void 9086 iwn_scan_end(struct ieee80211com *ic) 9087 { 9088 struct iwn_softc *sc = ic->ic_softc; 9089 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 9090 9091 IWN_LOCK(sc); 9092 if (vap->iv_state == IEEE80211_S_RUN) { 9093 /* Set link LED to ON status if we are associated */ 9094 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 9095 } 9096 IWN_UNLOCK(sc); 9097 } 9098 9099 /* 9100 * Callback from net80211 to force a channel change. 9101 */ 9102 static void 9103 iwn_set_channel(struct ieee80211com *ic) 9104 { 9105 const struct ieee80211_channel *c = ic->ic_curchan; 9106 struct iwn_softc *sc = ic->ic_softc; 9107 int error; 9108 9109 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 9110 9111 IWN_LOCK(sc); 9112 sc->sc_rxtap.wr_chan_freq = htole16(c->ic_freq); 9113 sc->sc_rxtap.wr_chan_flags = htole16(c->ic_flags); 9114 sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq); 9115 sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags); 9116 9117 /* 9118 * Only need to set the channel in Monitor mode. AP scanning and auth 9119 * are already taken care of by their respective firmware commands. 9120 */ 9121 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 9122 error = iwn_config(sc); 9123 if (error != 0) 9124 device_printf(sc->sc_dev, 9125 "%s: error %d settting channel\n", __func__, error); 9126 } 9127 IWN_UNLOCK(sc); 9128 } 9129 9130 /* 9131 * Callback from net80211 to start scanning of the current channel. 9132 */ 9133 static void 9134 iwn_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) 9135 { 9136 struct ieee80211vap *vap = ss->ss_vap; 9137 struct ieee80211com *ic = vap->iv_ic; 9138 struct iwn_softc *sc = ic->ic_softc; 9139 int error; 9140 9141 IWN_LOCK(sc); 9142 error = iwn_scan(sc, vap, ss, ic->ic_curchan); 9143 IWN_UNLOCK(sc); 9144 if (error != 0) 9145 ieee80211_cancel_scan(vap); 9146 } 9147 9148 /* 9149 * Callback from net80211 to handle the minimum dwell time being met. 9150 * The intent is to terminate the scan but we just let the firmware 9151 * notify us when it's finished as we have no safe way to abort it. 9152 */ 9153 static void 9154 iwn_scan_mindwell(struct ieee80211_scan_state *ss) 9155 { 9156 /* NB: don't try to abort scan; wait for firmware to finish */ 9157 } 9158 #ifdef IWN_DEBUG 9159 #define IWN_DESC(x) case x: return #x 9160 9161 /* 9162 * Translate CSR code to string 9163 */ 9164 static char *iwn_get_csr_string(int csr) 9165 { 9166 switch (csr) { 9167 IWN_DESC(IWN_HW_IF_CONFIG); 9168 IWN_DESC(IWN_INT_COALESCING); 9169 IWN_DESC(IWN_INT); 9170 IWN_DESC(IWN_INT_MASK); 9171 IWN_DESC(IWN_FH_INT); 9172 IWN_DESC(IWN_GPIO_IN); 9173 IWN_DESC(IWN_RESET); 9174 IWN_DESC(IWN_GP_CNTRL); 9175 IWN_DESC(IWN_HW_REV); 9176 IWN_DESC(IWN_EEPROM); 9177 IWN_DESC(IWN_EEPROM_GP); 9178 IWN_DESC(IWN_OTP_GP); 9179 IWN_DESC(IWN_GIO); 9180 IWN_DESC(IWN_GP_UCODE); 9181 IWN_DESC(IWN_GP_DRIVER); 9182 IWN_DESC(IWN_UCODE_GP1); 9183 IWN_DESC(IWN_UCODE_GP2); 9184 IWN_DESC(IWN_LED); 9185 IWN_DESC(IWN_DRAM_INT_TBL); 9186 IWN_DESC(IWN_GIO_CHICKEN); 9187 IWN_DESC(IWN_ANA_PLL); 9188 IWN_DESC(IWN_HW_REV_WA); 9189 IWN_DESC(IWN_DBG_HPET_MEM); 9190 default: 9191 return "UNKNOWN CSR"; 9192 } 9193 } 9194 9195 /* 9196 * This function print firmware register 9197 */ 9198 static void 9199 iwn_debug_register(struct iwn_softc *sc) 9200 { 9201 int i; 9202 static const uint32_t csr_tbl[] = { 9203 IWN_HW_IF_CONFIG, 9204 IWN_INT_COALESCING, 9205 IWN_INT, 9206 IWN_INT_MASK, 9207 IWN_FH_INT, 9208 IWN_GPIO_IN, 9209 IWN_RESET, 9210 IWN_GP_CNTRL, 9211 IWN_HW_REV, 9212 IWN_EEPROM, 9213 IWN_EEPROM_GP, 9214 IWN_OTP_GP, 9215 IWN_GIO, 9216 IWN_GP_UCODE, 9217 IWN_GP_DRIVER, 9218 IWN_UCODE_GP1, 9219 IWN_UCODE_GP2, 9220 IWN_LED, 9221 IWN_DRAM_INT_TBL, 9222 IWN_GIO_CHICKEN, 9223 IWN_ANA_PLL, 9224 IWN_HW_REV_WA, 9225 IWN_DBG_HPET_MEM, 9226 }; 9227 DPRINTF(sc, IWN_DEBUG_REGISTER, 9228 "CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)%s", 9229 "\n"); 9230 for (i = 0; i < nitems(csr_tbl); i++){ 9231 DPRINTF(sc, IWN_DEBUG_REGISTER," %10s: 0x%08x ", 9232 iwn_get_csr_string(csr_tbl[i]), IWN_READ(sc, csr_tbl[i])); 9233 if ((i+1) % 3 == 0) 9234 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 9235 } 9236 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 9237 } 9238 #endif 9239 9240 9241