1 /*- 2 * Copyright (c) 2007-2009 Damien Bergamini <damien.bergamini@free.fr> 3 * Copyright (c) 2008 Benjamin Close <benjsc@FreeBSD.org> 4 * Copyright (c) 2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2011 Intel Corporation 6 * Copyright (c) 2013 Cedric GROSS <c.gross@kreiz-it.fr> 7 * Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org> 8 * 9 * Permission to use, copy, modify, and distribute this software for any 10 * purpose with or without fee is hereby granted, provided that the above 11 * copyright notice and this permission notice appear in all copies. 12 * 13 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 14 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 16 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 17 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 18 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 19 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 20 */ 21 22 /* 23 * Driver for Intel WiFi Link 4965 and 1000/5000/6000 Series 802.11 network 24 * adapters. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_wlan.h" 31 #include "opt_iwn.h" 32 33 #include <sys/param.h> 34 #include <sys/sockio.h> 35 #include <sys/sysctl.h> 36 #include <sys/mbuf.h> 37 #include <sys/kernel.h> 38 #include <sys/socket.h> 39 #include <sys/systm.h> 40 #include <sys/malloc.h> 41 #include <sys/bus.h> 42 #include <sys/conf.h> 43 #include <sys/rman.h> 44 #include <sys/endian.h> 45 #include <sys/firmware.h> 46 #include <sys/limits.h> 47 #include <sys/module.h> 48 #include <sys/priv.h> 49 #include <sys/queue.h> 50 #include <sys/taskqueue.h> 51 52 #include <machine/bus.h> 53 #include <machine/resource.h> 54 #include <machine/clock.h> 55 56 #include <dev/pci/pcireg.h> 57 #include <dev/pci/pcivar.h> 58 59 #include <net/if.h> 60 #include <net/if_var.h> 61 #include <net/if_dl.h> 62 #include <net/if_media.h> 63 64 #include <netinet/in.h> 65 #include <netinet/if_ether.h> 66 67 #include <net80211/ieee80211_var.h> 68 #include <net80211/ieee80211_radiotap.h> 69 #include <net80211/ieee80211_regdomain.h> 70 #include <net80211/ieee80211_ratectl.h> 71 72 #include <dev/iwn/if_iwnreg.h> 73 #include <dev/iwn/if_iwnvar.h> 74 #include <dev/iwn/if_iwn_devid.h> 75 #include <dev/iwn/if_iwn_chip_cfg.h> 76 #include <dev/iwn/if_iwn_debug.h> 77 #include <dev/iwn/if_iwn_ioctl.h> 78 79 struct iwn_ident { 80 uint16_t vendor; 81 uint16_t device; 82 const char *name; 83 }; 84 85 static const struct iwn_ident iwn_ident_table[] = { 86 { 0x8086, IWN_DID_6x05_1, "Intel Centrino Advanced-N 6205" }, 87 { 0x8086, IWN_DID_1000_1, "Intel Centrino Wireless-N 1000" }, 88 { 0x8086, IWN_DID_1000_2, "Intel Centrino Wireless-N 1000" }, 89 { 0x8086, IWN_DID_6x05_2, "Intel Centrino Advanced-N 6205" }, 90 { 0x8086, IWN_DID_6050_1, "Intel Centrino Advanced-N + WiMAX 6250" }, 91 { 0x8086, IWN_DID_6050_2, "Intel Centrino Advanced-N + WiMAX 6250" }, 92 { 0x8086, IWN_DID_x030_1, "Intel Centrino Wireless-N 1030" }, 93 { 0x8086, IWN_DID_x030_2, "Intel Centrino Wireless-N 1030" }, 94 { 0x8086, IWN_DID_x030_3, "Intel Centrino Advanced-N 6230" }, 95 { 0x8086, IWN_DID_x030_4, "Intel Centrino Advanced-N 6230" }, 96 { 0x8086, IWN_DID_6150_1, "Intel Centrino Wireless-N + WiMAX 6150" }, 97 { 0x8086, IWN_DID_6150_2, "Intel Centrino Wireless-N + WiMAX 6150" }, 98 { 0x8086, IWN_DID_2x00_1, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 99 { 0x8086, IWN_DID_2x00_2, "Intel(R) Centrino(R) Wireless-N 2200 BGN" }, 100 /* XXX 2200D is IWN_SDID_2x00_4; there's no way to express this here! */ 101 { 0x8086, IWN_DID_2x30_1, "Intel Centrino Wireless-N 2230" }, 102 { 0x8086, IWN_DID_2x30_2, "Intel Centrino Wireless-N 2230" }, 103 { 0x8086, IWN_DID_130_1, "Intel Centrino Wireless-N 130" }, 104 { 0x8086, IWN_DID_130_2, "Intel Centrino Wireless-N 130" }, 105 { 0x8086, IWN_DID_100_1, "Intel Centrino Wireless-N 100" }, 106 { 0x8086, IWN_DID_100_2, "Intel Centrino Wireless-N 100" }, 107 { 0x8086, IWN_DID_105_1, "Intel Centrino Wireless-N 105" }, 108 { 0x8086, IWN_DID_105_2, "Intel Centrino Wireless-N 105" }, 109 { 0x8086, IWN_DID_135_1, "Intel Centrino Wireless-N 135" }, 110 { 0x8086, IWN_DID_135_2, "Intel Centrino Wireless-N 135" }, 111 { 0x8086, IWN_DID_4965_1, "Intel Wireless WiFi Link 4965" }, 112 { 0x8086, IWN_DID_6x00_1, "Intel Centrino Ultimate-N 6300" }, 113 { 0x8086, IWN_DID_6x00_2, "Intel Centrino Advanced-N 6200" }, 114 { 0x8086, IWN_DID_4965_2, "Intel Wireless WiFi Link 4965" }, 115 { 0x8086, IWN_DID_4965_3, "Intel Wireless WiFi Link 4965" }, 116 { 0x8086, IWN_DID_5x00_1, "Intel WiFi Link 5100" }, 117 { 0x8086, IWN_DID_4965_4, "Intel Wireless WiFi Link 4965" }, 118 { 0x8086, IWN_DID_5x00_3, "Intel Ultimate N WiFi Link 5300" }, 119 { 0x8086, IWN_DID_5x00_4, "Intel Ultimate N WiFi Link 5300" }, 120 { 0x8086, IWN_DID_5x00_2, "Intel WiFi Link 5100" }, 121 { 0x8086, IWN_DID_6x00_3, "Intel Centrino Ultimate-N 6300" }, 122 { 0x8086, IWN_DID_6x00_4, "Intel Centrino Advanced-N 6200" }, 123 { 0x8086, IWN_DID_5x50_1, "Intel WiMAX/WiFi Link 5350" }, 124 { 0x8086, IWN_DID_5x50_2, "Intel WiMAX/WiFi Link 5350" }, 125 { 0x8086, IWN_DID_5x50_3, "Intel WiMAX/WiFi Link 5150" }, 126 { 0x8086, IWN_DID_5x50_4, "Intel WiMAX/WiFi Link 5150" }, 127 { 0x8086, IWN_DID_6035_1, "Intel Centrino Advanced 6235" }, 128 { 0x8086, IWN_DID_6035_2, "Intel Centrino Advanced 6235" }, 129 { 0, 0, NULL } 130 }; 131 132 static int iwn_probe(device_t); 133 static int iwn_attach(device_t); 134 static int iwn4965_attach(struct iwn_softc *, uint16_t); 135 static int iwn5000_attach(struct iwn_softc *, uint16_t); 136 static int iwn_config_specific(struct iwn_softc *, uint16_t); 137 static void iwn_radiotap_attach(struct iwn_softc *); 138 static void iwn_sysctlattach(struct iwn_softc *); 139 static struct ieee80211vap *iwn_vap_create(struct ieee80211com *, 140 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 141 const uint8_t [IEEE80211_ADDR_LEN], 142 const uint8_t [IEEE80211_ADDR_LEN]); 143 static void iwn_vap_delete(struct ieee80211vap *); 144 static int iwn_detach(device_t); 145 static int iwn_shutdown(device_t); 146 static int iwn_suspend(device_t); 147 static int iwn_resume(device_t); 148 static int iwn_nic_lock(struct iwn_softc *); 149 static int iwn_eeprom_lock(struct iwn_softc *); 150 static int iwn_init_otprom(struct iwn_softc *); 151 static int iwn_read_prom_data(struct iwn_softc *, uint32_t, void *, int); 152 static void iwn_dma_map_addr(void *, bus_dma_segment_t *, int, int); 153 static int iwn_dma_contig_alloc(struct iwn_softc *, struct iwn_dma_info *, 154 void **, bus_size_t, bus_size_t); 155 static void iwn_dma_contig_free(struct iwn_dma_info *); 156 static int iwn_alloc_sched(struct iwn_softc *); 157 static void iwn_free_sched(struct iwn_softc *); 158 static int iwn_alloc_kw(struct iwn_softc *); 159 static void iwn_free_kw(struct iwn_softc *); 160 static int iwn_alloc_ict(struct iwn_softc *); 161 static void iwn_free_ict(struct iwn_softc *); 162 static int iwn_alloc_fwmem(struct iwn_softc *); 163 static void iwn_free_fwmem(struct iwn_softc *); 164 static int iwn_alloc_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 165 static void iwn_reset_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 166 static void iwn_free_rx_ring(struct iwn_softc *, struct iwn_rx_ring *); 167 static int iwn_alloc_tx_ring(struct iwn_softc *, struct iwn_tx_ring *, 168 int); 169 static void iwn_reset_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 170 static void iwn_free_tx_ring(struct iwn_softc *, struct iwn_tx_ring *); 171 static void iwn5000_ict_reset(struct iwn_softc *); 172 static int iwn_read_eeprom(struct iwn_softc *, 173 uint8_t macaddr[IEEE80211_ADDR_LEN]); 174 static void iwn4965_read_eeprom(struct iwn_softc *); 175 #ifdef IWN_DEBUG 176 static void iwn4965_print_power_group(struct iwn_softc *, int); 177 #endif 178 static void iwn5000_read_eeprom(struct iwn_softc *); 179 static uint32_t iwn_eeprom_channel_flags(struct iwn_eeprom_chan *); 180 static void iwn_read_eeprom_band(struct iwn_softc *, int); 181 static void iwn_read_eeprom_ht40(struct iwn_softc *, int); 182 static void iwn_read_eeprom_channels(struct iwn_softc *, int, uint32_t); 183 static struct iwn_eeprom_chan *iwn_find_eeprom_channel(struct iwn_softc *, 184 struct ieee80211_channel *); 185 static int iwn_setregdomain(struct ieee80211com *, 186 struct ieee80211_regdomain *, int, 187 struct ieee80211_channel[]); 188 static void iwn_read_eeprom_enhinfo(struct iwn_softc *); 189 static struct ieee80211_node *iwn_node_alloc(struct ieee80211vap *, 190 const uint8_t mac[IEEE80211_ADDR_LEN]); 191 static void iwn_newassoc(struct ieee80211_node *, int); 192 static int iwn_media_change(struct ifnet *); 193 static int iwn_newstate(struct ieee80211vap *, enum ieee80211_state, int); 194 static void iwn_calib_timeout(void *); 195 static void iwn_rx_phy(struct iwn_softc *, struct iwn_rx_desc *, 196 struct iwn_rx_data *); 197 static void iwn_rx_done(struct iwn_softc *, struct iwn_rx_desc *, 198 struct iwn_rx_data *); 199 static void iwn_rx_compressed_ba(struct iwn_softc *, struct iwn_rx_desc *, 200 struct iwn_rx_data *); 201 static void iwn5000_rx_calib_results(struct iwn_softc *, 202 struct iwn_rx_desc *, struct iwn_rx_data *); 203 static void iwn_rx_statistics(struct iwn_softc *, struct iwn_rx_desc *, 204 struct iwn_rx_data *); 205 static void iwn4965_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 206 struct iwn_rx_data *); 207 static void iwn5000_tx_done(struct iwn_softc *, struct iwn_rx_desc *, 208 struct iwn_rx_data *); 209 static void iwn_tx_done(struct iwn_softc *, struct iwn_rx_desc *, int, 210 uint8_t); 211 static void iwn_ampdu_tx_done(struct iwn_softc *, int, int, int, int, void *); 212 static void iwn_cmd_done(struct iwn_softc *, struct iwn_rx_desc *); 213 static void iwn_notif_intr(struct iwn_softc *); 214 static void iwn_wakeup_intr(struct iwn_softc *); 215 static void iwn_rftoggle_intr(struct iwn_softc *); 216 static void iwn_fatal_intr(struct iwn_softc *); 217 static void iwn_intr(void *); 218 static void iwn4965_update_sched(struct iwn_softc *, int, int, uint8_t, 219 uint16_t); 220 static void iwn5000_update_sched(struct iwn_softc *, int, int, uint8_t, 221 uint16_t); 222 #ifdef notyet 223 static void iwn5000_reset_sched(struct iwn_softc *, int, int); 224 #endif 225 static int iwn_tx_data(struct iwn_softc *, struct mbuf *, 226 struct ieee80211_node *); 227 static int iwn_tx_data_raw(struct iwn_softc *, struct mbuf *, 228 struct ieee80211_node *, 229 const struct ieee80211_bpf_params *params); 230 static void iwn_xmit_task(void *arg0, int pending); 231 static int iwn_raw_xmit(struct ieee80211_node *, struct mbuf *, 232 const struct ieee80211_bpf_params *); 233 static int iwn_transmit(struct ieee80211com *, struct mbuf *); 234 static void iwn_watchdog(void *); 235 static int iwn_ioctl(struct ieee80211com *, u_long , void *); 236 static void iwn_parent(struct ieee80211com *); 237 static int iwn_cmd(struct iwn_softc *, int, const void *, int, int); 238 static int iwn4965_add_node(struct iwn_softc *, struct iwn_node_info *, 239 int); 240 static int iwn5000_add_node(struct iwn_softc *, struct iwn_node_info *, 241 int); 242 static int iwn_set_link_quality(struct iwn_softc *, 243 struct ieee80211_node *); 244 static int iwn_add_broadcast_node(struct iwn_softc *, int); 245 static int iwn_updateedca(struct ieee80211com *); 246 static void iwn_update_mcast(struct ieee80211com *); 247 static void iwn_set_led(struct iwn_softc *, uint8_t, uint8_t, uint8_t); 248 static int iwn_set_critical_temp(struct iwn_softc *); 249 static int iwn_set_timing(struct iwn_softc *, struct ieee80211_node *); 250 static void iwn4965_power_calibration(struct iwn_softc *, int); 251 static int iwn4965_set_txpower(struct iwn_softc *, 252 struct ieee80211_channel *, int); 253 static int iwn5000_set_txpower(struct iwn_softc *, 254 struct ieee80211_channel *, int); 255 static int iwn4965_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 256 static int iwn5000_get_rssi(struct iwn_softc *, struct iwn_rx_stat *); 257 static int iwn_get_noise(const struct iwn_rx_general_stats *); 258 static int iwn4965_get_temperature(struct iwn_softc *); 259 static int iwn5000_get_temperature(struct iwn_softc *); 260 static int iwn_init_sensitivity(struct iwn_softc *); 261 static void iwn_collect_noise(struct iwn_softc *, 262 const struct iwn_rx_general_stats *); 263 static int iwn4965_init_gains(struct iwn_softc *); 264 static int iwn5000_init_gains(struct iwn_softc *); 265 static int iwn4965_set_gains(struct iwn_softc *); 266 static int iwn5000_set_gains(struct iwn_softc *); 267 static void iwn_tune_sensitivity(struct iwn_softc *, 268 const struct iwn_rx_stats *); 269 static void iwn_save_stats_counters(struct iwn_softc *, 270 const struct iwn_stats *); 271 static int iwn_send_sensitivity(struct iwn_softc *); 272 static void iwn_check_rx_recovery(struct iwn_softc *, struct iwn_stats *); 273 static int iwn_set_pslevel(struct iwn_softc *, int, int, int); 274 static int iwn_send_btcoex(struct iwn_softc *); 275 static int iwn_send_advanced_btcoex(struct iwn_softc *); 276 static int iwn5000_runtime_calib(struct iwn_softc *); 277 static int iwn_config(struct iwn_softc *); 278 static int iwn_scan(struct iwn_softc *, struct ieee80211vap *, 279 struct ieee80211_scan_state *, struct ieee80211_channel *); 280 static int iwn_auth(struct iwn_softc *, struct ieee80211vap *vap); 281 static int iwn_run(struct iwn_softc *, struct ieee80211vap *vap); 282 static int iwn_ampdu_rx_start(struct ieee80211_node *, 283 struct ieee80211_rx_ampdu *, int, int, int); 284 static void iwn_ampdu_rx_stop(struct ieee80211_node *, 285 struct ieee80211_rx_ampdu *); 286 static int iwn_addba_request(struct ieee80211_node *, 287 struct ieee80211_tx_ampdu *, int, int, int); 288 static int iwn_addba_response(struct ieee80211_node *, 289 struct ieee80211_tx_ampdu *, int, int, int); 290 static int iwn_ampdu_tx_start(struct ieee80211com *, 291 struct ieee80211_node *, uint8_t); 292 static void iwn_ampdu_tx_stop(struct ieee80211_node *, 293 struct ieee80211_tx_ampdu *); 294 static void iwn4965_ampdu_tx_start(struct iwn_softc *, 295 struct ieee80211_node *, int, uint8_t, uint16_t); 296 static void iwn4965_ampdu_tx_stop(struct iwn_softc *, int, 297 uint8_t, uint16_t); 298 static void iwn5000_ampdu_tx_start(struct iwn_softc *, 299 struct ieee80211_node *, int, uint8_t, uint16_t); 300 static void iwn5000_ampdu_tx_stop(struct iwn_softc *, int, 301 uint8_t, uint16_t); 302 static int iwn5000_query_calibration(struct iwn_softc *); 303 static int iwn5000_send_calibration(struct iwn_softc *); 304 static int iwn5000_send_wimax_coex(struct iwn_softc *); 305 static int iwn5000_crystal_calib(struct iwn_softc *); 306 static int iwn5000_temp_offset_calib(struct iwn_softc *); 307 static int iwn5000_temp_offset_calibv2(struct iwn_softc *); 308 static int iwn4965_post_alive(struct iwn_softc *); 309 static int iwn5000_post_alive(struct iwn_softc *); 310 static int iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *, 311 int); 312 static int iwn4965_load_firmware(struct iwn_softc *); 313 static int iwn5000_load_firmware_section(struct iwn_softc *, uint32_t, 314 const uint8_t *, int); 315 static int iwn5000_load_firmware(struct iwn_softc *); 316 static int iwn_read_firmware_leg(struct iwn_softc *, 317 struct iwn_fw_info *); 318 static int iwn_read_firmware_tlv(struct iwn_softc *, 319 struct iwn_fw_info *, uint16_t); 320 static int iwn_read_firmware(struct iwn_softc *); 321 static int iwn_clock_wait(struct iwn_softc *); 322 static int iwn_apm_init(struct iwn_softc *); 323 static void iwn_apm_stop_master(struct iwn_softc *); 324 static void iwn_apm_stop(struct iwn_softc *); 325 static int iwn4965_nic_config(struct iwn_softc *); 326 static int iwn5000_nic_config(struct iwn_softc *); 327 static int iwn_hw_prepare(struct iwn_softc *); 328 static int iwn_hw_init(struct iwn_softc *); 329 static void iwn_hw_stop(struct iwn_softc *); 330 static void iwn_radio_on(void *, int); 331 static void iwn_radio_off(void *, int); 332 static void iwn_panicked(void *, int); 333 static void iwn_init_locked(struct iwn_softc *); 334 static void iwn_init(struct iwn_softc *); 335 static void iwn_stop_locked(struct iwn_softc *); 336 static void iwn_stop(struct iwn_softc *); 337 static void iwn_scan_start(struct ieee80211com *); 338 static void iwn_scan_end(struct ieee80211com *); 339 static void iwn_set_channel(struct ieee80211com *); 340 static void iwn_scan_curchan(struct ieee80211_scan_state *, unsigned long); 341 static void iwn_scan_mindwell(struct ieee80211_scan_state *); 342 static void iwn_hw_reset(void *, int); 343 #ifdef IWN_DEBUG 344 static char *iwn_get_csr_string(int); 345 static void iwn_debug_register(struct iwn_softc *); 346 #endif 347 348 static device_method_t iwn_methods[] = { 349 /* Device interface */ 350 DEVMETHOD(device_probe, iwn_probe), 351 DEVMETHOD(device_attach, iwn_attach), 352 DEVMETHOD(device_detach, iwn_detach), 353 DEVMETHOD(device_shutdown, iwn_shutdown), 354 DEVMETHOD(device_suspend, iwn_suspend), 355 DEVMETHOD(device_resume, iwn_resume), 356 357 DEVMETHOD_END 358 }; 359 360 static driver_t iwn_driver = { 361 "iwn", 362 iwn_methods, 363 sizeof(struct iwn_softc) 364 }; 365 static devclass_t iwn_devclass; 366 367 DRIVER_MODULE(iwn, pci, iwn_driver, iwn_devclass, NULL, NULL); 368 369 MODULE_VERSION(iwn, 1); 370 371 MODULE_DEPEND(iwn, firmware, 1, 1, 1); 372 MODULE_DEPEND(iwn, pci, 1, 1, 1); 373 MODULE_DEPEND(iwn, wlan, 1, 1, 1); 374 375 static d_ioctl_t iwn_cdev_ioctl; 376 static d_open_t iwn_cdev_open; 377 static d_close_t iwn_cdev_close; 378 379 static struct cdevsw iwn_cdevsw = { 380 .d_version = D_VERSION, 381 .d_flags = 0, 382 .d_open = iwn_cdev_open, 383 .d_close = iwn_cdev_close, 384 .d_ioctl = iwn_cdev_ioctl, 385 .d_name = "iwn", 386 }; 387 388 static int 389 iwn_probe(device_t dev) 390 { 391 const struct iwn_ident *ident; 392 393 for (ident = iwn_ident_table; ident->name != NULL; ident++) { 394 if (pci_get_vendor(dev) == ident->vendor && 395 pci_get_device(dev) == ident->device) { 396 device_set_desc(dev, ident->name); 397 return (BUS_PROBE_DEFAULT); 398 } 399 } 400 return ENXIO; 401 } 402 403 static int 404 iwn_is_3stream_device(struct iwn_softc *sc) 405 { 406 /* XXX for now only 5300, until the 5350 can be tested */ 407 if (sc->hw_type == IWN_HW_REV_TYPE_5300) 408 return (1); 409 return (0); 410 } 411 412 static int 413 iwn_attach(device_t dev) 414 { 415 struct iwn_softc *sc = (struct iwn_softc *)device_get_softc(dev); 416 struct ieee80211com *ic; 417 int i, error, rid; 418 419 sc->sc_dev = dev; 420 421 #ifdef IWN_DEBUG 422 error = resource_int_value(device_get_name(sc->sc_dev), 423 device_get_unit(sc->sc_dev), "debug", &(sc->sc_debug)); 424 if (error != 0) 425 sc->sc_debug = 0; 426 #else 427 sc->sc_debug = 0; 428 #endif 429 430 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: begin\n",__func__); 431 432 /* 433 * Get the offset of the PCI Express Capability Structure in PCI 434 * Configuration Space. 435 */ 436 error = pci_find_cap(dev, PCIY_EXPRESS, &sc->sc_cap_off); 437 if (error != 0) { 438 device_printf(dev, "PCIe capability structure not found!\n"); 439 return error; 440 } 441 442 /* Clear device-specific "PCI retry timeout" register (41h). */ 443 pci_write_config(dev, 0x41, 0, 1); 444 445 /* Enable bus-mastering. */ 446 pci_enable_busmaster(dev); 447 448 rid = PCIR_BAR(0); 449 sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 450 RF_ACTIVE); 451 if (sc->mem == NULL) { 452 device_printf(dev, "can't map mem space\n"); 453 error = ENOMEM; 454 return error; 455 } 456 sc->sc_st = rman_get_bustag(sc->mem); 457 sc->sc_sh = rman_get_bushandle(sc->mem); 458 459 i = 1; 460 rid = 0; 461 if (pci_alloc_msi(dev, &i) == 0) 462 rid = 1; 463 /* Install interrupt handler. */ 464 sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE | 465 (rid != 0 ? 0 : RF_SHAREABLE)); 466 if (sc->irq == NULL) { 467 device_printf(dev, "can't map interrupt\n"); 468 error = ENOMEM; 469 goto fail; 470 } 471 472 IWN_LOCK_INIT(sc); 473 474 /* Read hardware revision and attach. */ 475 sc->hw_type = (IWN_READ(sc, IWN_HW_REV) >> IWN_HW_REV_TYPE_SHIFT) 476 & IWN_HW_REV_TYPE_MASK; 477 sc->subdevice_id = pci_get_subdevice(dev); 478 479 /* 480 * 4965 versus 5000 and later have different methods. 481 * Let's set those up first. 482 */ 483 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 484 error = iwn4965_attach(sc, pci_get_device(dev)); 485 else 486 error = iwn5000_attach(sc, pci_get_device(dev)); 487 if (error != 0) { 488 device_printf(dev, "could not attach device, error %d\n", 489 error); 490 goto fail; 491 } 492 493 /* 494 * Next, let's setup the various parameters of each NIC. 495 */ 496 error = iwn_config_specific(sc, pci_get_device(dev)); 497 if (error != 0) { 498 device_printf(dev, "could not attach device, error %d\n", 499 error); 500 goto fail; 501 } 502 503 if ((error = iwn_hw_prepare(sc)) != 0) { 504 device_printf(dev, "hardware not ready, error %d\n", error); 505 goto fail; 506 } 507 508 /* Allocate DMA memory for firmware transfers. */ 509 if ((error = iwn_alloc_fwmem(sc)) != 0) { 510 device_printf(dev, 511 "could not allocate memory for firmware, error %d\n", 512 error); 513 goto fail; 514 } 515 516 /* Allocate "Keep Warm" page. */ 517 if ((error = iwn_alloc_kw(sc)) != 0) { 518 device_printf(dev, 519 "could not allocate keep warm page, error %d\n", error); 520 goto fail; 521 } 522 523 /* Allocate ICT table for 5000 Series. */ 524 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 525 (error = iwn_alloc_ict(sc)) != 0) { 526 device_printf(dev, "could not allocate ICT table, error %d\n", 527 error); 528 goto fail; 529 } 530 531 /* Allocate TX scheduler "rings". */ 532 if ((error = iwn_alloc_sched(sc)) != 0) { 533 device_printf(dev, 534 "could not allocate TX scheduler rings, error %d\n", error); 535 goto fail; 536 } 537 538 /* Allocate TX rings (16 on 4965AGN, 20 on >=5000). */ 539 for (i = 0; i < sc->ntxqs; i++) { 540 if ((error = iwn_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) { 541 device_printf(dev, 542 "could not allocate TX ring %d, error %d\n", i, 543 error); 544 goto fail; 545 } 546 } 547 548 /* Allocate RX ring. */ 549 if ((error = iwn_alloc_rx_ring(sc, &sc->rxq)) != 0) { 550 device_printf(dev, "could not allocate RX ring, error %d\n", 551 error); 552 goto fail; 553 } 554 555 /* Clear pending interrupts. */ 556 IWN_WRITE(sc, IWN_INT, 0xffffffff); 557 558 ic = &sc->sc_ic; 559 ic->ic_softc = sc; 560 ic->ic_name = device_get_nameunit(dev); 561 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 562 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 563 564 /* Set device capabilities. */ 565 ic->ic_caps = 566 IEEE80211_C_STA /* station mode supported */ 567 | IEEE80211_C_MONITOR /* monitor mode supported */ 568 #if 0 569 | IEEE80211_C_BGSCAN /* background scanning */ 570 #endif 571 | IEEE80211_C_TXPMGT /* tx power management */ 572 | IEEE80211_C_SHSLOT /* short slot time supported */ 573 | IEEE80211_C_WPA 574 | IEEE80211_C_SHPREAMBLE /* short preamble supported */ 575 #if 0 576 | IEEE80211_C_IBSS /* ibss/adhoc mode */ 577 #endif 578 | IEEE80211_C_WME /* WME */ 579 | IEEE80211_C_PMGT /* Station-side power mgmt */ 580 ; 581 582 /* Read MAC address, channels, etc from EEPROM. */ 583 if ((error = iwn_read_eeprom(sc, ic->ic_macaddr)) != 0) { 584 device_printf(dev, "could not read EEPROM, error %d\n", 585 error); 586 goto fail; 587 } 588 589 /* Count the number of available chains. */ 590 sc->ntxchains = 591 ((sc->txchainmask >> 2) & 1) + 592 ((sc->txchainmask >> 1) & 1) + 593 ((sc->txchainmask >> 0) & 1); 594 sc->nrxchains = 595 ((sc->rxchainmask >> 2) & 1) + 596 ((sc->rxchainmask >> 1) & 1) + 597 ((sc->rxchainmask >> 0) & 1); 598 if (bootverbose) { 599 device_printf(dev, "MIMO %dT%dR, %.4s, address %6D\n", 600 sc->ntxchains, sc->nrxchains, sc->eeprom_domain, 601 ic->ic_macaddr, ":"); 602 } 603 604 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 605 ic->ic_rxstream = sc->nrxchains; 606 ic->ic_txstream = sc->ntxchains; 607 608 /* 609 * Some of the 3 antenna devices (ie, the 4965) only supports 610 * 2x2 operation. So correct the number of streams if 611 * it's not a 3-stream device. 612 */ 613 if (! iwn_is_3stream_device(sc)) { 614 if (ic->ic_rxstream > 2) 615 ic->ic_rxstream = 2; 616 if (ic->ic_txstream > 2) 617 ic->ic_txstream = 2; 618 } 619 620 ic->ic_htcaps = 621 IEEE80211_HTCAP_SMPS_OFF /* SMPS mode disabled */ 622 | IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */ 623 | IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width*/ 624 | IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */ 625 #ifdef notyet 626 | IEEE80211_HTCAP_GREENFIELD 627 #if IWN_RBUF_SIZE == 8192 628 | IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */ 629 #else 630 | IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */ 631 #endif 632 #endif 633 /* s/w capabilities */ 634 | IEEE80211_HTC_HT /* HT operation */ 635 | IEEE80211_HTC_AMPDU /* tx A-MPDU */ 636 #ifdef notyet 637 | IEEE80211_HTC_AMSDU /* tx A-MSDU */ 638 #endif 639 ; 640 } 641 642 ieee80211_ifattach(ic); 643 ic->ic_vap_create = iwn_vap_create; 644 ic->ic_ioctl = iwn_ioctl; 645 ic->ic_parent = iwn_parent; 646 ic->ic_vap_delete = iwn_vap_delete; 647 ic->ic_transmit = iwn_transmit; 648 ic->ic_raw_xmit = iwn_raw_xmit; 649 ic->ic_node_alloc = iwn_node_alloc; 650 sc->sc_ampdu_rx_start = ic->ic_ampdu_rx_start; 651 ic->ic_ampdu_rx_start = iwn_ampdu_rx_start; 652 sc->sc_ampdu_rx_stop = ic->ic_ampdu_rx_stop; 653 ic->ic_ampdu_rx_stop = iwn_ampdu_rx_stop; 654 sc->sc_addba_request = ic->ic_addba_request; 655 ic->ic_addba_request = iwn_addba_request; 656 sc->sc_addba_response = ic->ic_addba_response; 657 ic->ic_addba_response = iwn_addba_response; 658 sc->sc_addba_stop = ic->ic_addba_stop; 659 ic->ic_addba_stop = iwn_ampdu_tx_stop; 660 ic->ic_newassoc = iwn_newassoc; 661 ic->ic_wme.wme_update = iwn_updateedca; 662 ic->ic_update_mcast = iwn_update_mcast; 663 ic->ic_scan_start = iwn_scan_start; 664 ic->ic_scan_end = iwn_scan_end; 665 ic->ic_set_channel = iwn_set_channel; 666 ic->ic_scan_curchan = iwn_scan_curchan; 667 ic->ic_scan_mindwell = iwn_scan_mindwell; 668 ic->ic_setregdomain = iwn_setregdomain; 669 670 iwn_radiotap_attach(sc); 671 672 callout_init_mtx(&sc->calib_to, &sc->sc_mtx, 0); 673 callout_init_mtx(&sc->watchdog_to, &sc->sc_mtx, 0); 674 TASK_INIT(&sc->sc_reinit_task, 0, iwn_hw_reset, sc); 675 TASK_INIT(&sc->sc_radioon_task, 0, iwn_radio_on, sc); 676 TASK_INIT(&sc->sc_radiooff_task, 0, iwn_radio_off, sc); 677 TASK_INIT(&sc->sc_panic_task, 0, iwn_panicked, sc); 678 TASK_INIT(&sc->sc_xmit_task, 0, iwn_xmit_task, sc); 679 680 mbufq_init(&sc->sc_xmit_queue, 1024); 681 682 sc->sc_tq = taskqueue_create("iwn_taskq", M_WAITOK, 683 taskqueue_thread_enqueue, &sc->sc_tq); 684 error = taskqueue_start_threads(&sc->sc_tq, 1, 0, "iwn_taskq"); 685 if (error != 0) { 686 device_printf(dev, "can't start threads, error %d\n", error); 687 goto fail; 688 } 689 690 iwn_sysctlattach(sc); 691 692 /* 693 * Hook our interrupt after all initialization is complete. 694 */ 695 error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, 696 NULL, iwn_intr, sc, &sc->sc_ih); 697 if (error != 0) { 698 device_printf(dev, "can't establish interrupt, error %d\n", 699 error); 700 goto fail; 701 } 702 703 #if 0 704 device_printf(sc->sc_dev, "%s: rx_stats=%d, rx_stats_bt=%d\n", 705 __func__, 706 sizeof(struct iwn_stats), 707 sizeof(struct iwn_stats_bt)); 708 #endif 709 710 if (bootverbose) 711 ieee80211_announce(ic); 712 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 713 714 /* Add debug ioctl right at the end */ 715 sc->sc_cdev = make_dev(&iwn_cdevsw, device_get_unit(dev), 716 UID_ROOT, GID_WHEEL, 0600, "%s", device_get_nameunit(dev)); 717 if (sc->sc_cdev == NULL) { 718 device_printf(dev, "failed to create debug character device\n"); 719 } else { 720 sc->sc_cdev->si_drv1 = sc; 721 } 722 return 0; 723 fail: 724 iwn_detach(dev); 725 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 726 return error; 727 } 728 729 /* 730 * Define specific configuration based on device id and subdevice id 731 * pid : PCI device id 732 */ 733 static int 734 iwn_config_specific(struct iwn_softc *sc, uint16_t pid) 735 { 736 737 switch (pid) { 738 /* 4965 series */ 739 case IWN_DID_4965_1: 740 case IWN_DID_4965_2: 741 case IWN_DID_4965_3: 742 case IWN_DID_4965_4: 743 sc->base_params = &iwn4965_base_params; 744 sc->limits = &iwn4965_sensitivity_limits; 745 sc->fwname = "iwn4965fw"; 746 /* Override chains masks, ROM is known to be broken. */ 747 sc->txchainmask = IWN_ANT_AB; 748 sc->rxchainmask = IWN_ANT_ABC; 749 /* Enable normal btcoex */ 750 sc->sc_flags |= IWN_FLAG_BTCOEX; 751 break; 752 /* 1000 Series */ 753 case IWN_DID_1000_1: 754 case IWN_DID_1000_2: 755 switch(sc->subdevice_id) { 756 case IWN_SDID_1000_1: 757 case IWN_SDID_1000_2: 758 case IWN_SDID_1000_3: 759 case IWN_SDID_1000_4: 760 case IWN_SDID_1000_5: 761 case IWN_SDID_1000_6: 762 case IWN_SDID_1000_7: 763 case IWN_SDID_1000_8: 764 case IWN_SDID_1000_9: 765 case IWN_SDID_1000_10: 766 case IWN_SDID_1000_11: 767 case IWN_SDID_1000_12: 768 sc->limits = &iwn1000_sensitivity_limits; 769 sc->base_params = &iwn1000_base_params; 770 sc->fwname = "iwn1000fw"; 771 break; 772 default: 773 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 774 "0x%04x rev %d not supported (subdevice)\n", pid, 775 sc->subdevice_id,sc->hw_type); 776 return ENOTSUP; 777 } 778 break; 779 /* 6x00 Series */ 780 case IWN_DID_6x00_2: 781 case IWN_DID_6x00_4: 782 case IWN_DID_6x00_1: 783 case IWN_DID_6x00_3: 784 sc->fwname = "iwn6000fw"; 785 sc->limits = &iwn6000_sensitivity_limits; 786 switch(sc->subdevice_id) { 787 case IWN_SDID_6x00_1: 788 case IWN_SDID_6x00_2: 789 case IWN_SDID_6x00_8: 790 //iwl6000_3agn_cfg 791 sc->base_params = &iwn_6000_base_params; 792 break; 793 case IWN_SDID_6x00_3: 794 case IWN_SDID_6x00_6: 795 case IWN_SDID_6x00_9: 796 ////iwl6000i_2agn 797 case IWN_SDID_6x00_4: 798 case IWN_SDID_6x00_7: 799 case IWN_SDID_6x00_10: 800 //iwl6000i_2abg_cfg 801 case IWN_SDID_6x00_5: 802 //iwl6000i_2bg_cfg 803 sc->base_params = &iwn_6000i_base_params; 804 sc->sc_flags |= IWN_FLAG_INTERNAL_PA; 805 sc->txchainmask = IWN_ANT_BC; 806 sc->rxchainmask = IWN_ANT_BC; 807 break; 808 default: 809 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 810 "0x%04x rev %d not supported (subdevice)\n", pid, 811 sc->subdevice_id,sc->hw_type); 812 return ENOTSUP; 813 } 814 break; 815 /* 6x05 Series */ 816 case IWN_DID_6x05_1: 817 case IWN_DID_6x05_2: 818 switch(sc->subdevice_id) { 819 case IWN_SDID_6x05_1: 820 case IWN_SDID_6x05_4: 821 case IWN_SDID_6x05_6: 822 //iwl6005_2agn_cfg 823 case IWN_SDID_6x05_2: 824 case IWN_SDID_6x05_5: 825 case IWN_SDID_6x05_7: 826 //iwl6005_2abg_cfg 827 case IWN_SDID_6x05_3: 828 //iwl6005_2bg_cfg 829 case IWN_SDID_6x05_8: 830 case IWN_SDID_6x05_9: 831 //iwl6005_2agn_sff_cfg 832 case IWN_SDID_6x05_10: 833 //iwl6005_2agn_d_cfg 834 case IWN_SDID_6x05_11: 835 //iwl6005_2agn_mow1_cfg 836 case IWN_SDID_6x05_12: 837 //iwl6005_2agn_mow2_cfg 838 sc->fwname = "iwn6000g2afw"; 839 sc->limits = &iwn6000_sensitivity_limits; 840 sc->base_params = &iwn_6000g2_base_params; 841 break; 842 default: 843 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 844 "0x%04x rev %d not supported (subdevice)\n", pid, 845 sc->subdevice_id,sc->hw_type); 846 return ENOTSUP; 847 } 848 break; 849 /* 6x35 Series */ 850 case IWN_DID_6035_1: 851 case IWN_DID_6035_2: 852 switch(sc->subdevice_id) { 853 case IWN_SDID_6035_1: 854 case IWN_SDID_6035_2: 855 case IWN_SDID_6035_3: 856 case IWN_SDID_6035_4: 857 sc->fwname = "iwn6000g2bfw"; 858 sc->limits = &iwn6235_sensitivity_limits; 859 sc->base_params = &iwn_6235_base_params; 860 break; 861 default: 862 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 863 "0x%04x rev %d not supported (subdevice)\n", pid, 864 sc->subdevice_id,sc->hw_type); 865 return ENOTSUP; 866 } 867 break; 868 /* 6x50 WiFi/WiMax Series */ 869 case IWN_DID_6050_1: 870 case IWN_DID_6050_2: 871 switch(sc->subdevice_id) { 872 case IWN_SDID_6050_1: 873 case IWN_SDID_6050_3: 874 case IWN_SDID_6050_5: 875 //iwl6050_2agn_cfg 876 case IWN_SDID_6050_2: 877 case IWN_SDID_6050_4: 878 case IWN_SDID_6050_6: 879 //iwl6050_2abg_cfg 880 sc->fwname = "iwn6050fw"; 881 sc->txchainmask = IWN_ANT_AB; 882 sc->rxchainmask = IWN_ANT_AB; 883 sc->limits = &iwn6000_sensitivity_limits; 884 sc->base_params = &iwn_6050_base_params; 885 break; 886 default: 887 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 888 "0x%04x rev %d not supported (subdevice)\n", pid, 889 sc->subdevice_id,sc->hw_type); 890 return ENOTSUP; 891 } 892 break; 893 /* 6150 WiFi/WiMax Series */ 894 case IWN_DID_6150_1: 895 case IWN_DID_6150_2: 896 switch(sc->subdevice_id) { 897 case IWN_SDID_6150_1: 898 case IWN_SDID_6150_3: 899 case IWN_SDID_6150_5: 900 // iwl6150_bgn_cfg 901 case IWN_SDID_6150_2: 902 case IWN_SDID_6150_4: 903 case IWN_SDID_6150_6: 904 //iwl6150_bg_cfg 905 sc->fwname = "iwn6050fw"; 906 sc->limits = &iwn6000_sensitivity_limits; 907 sc->base_params = &iwn_6150_base_params; 908 break; 909 default: 910 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 911 "0x%04x rev %d not supported (subdevice)\n", pid, 912 sc->subdevice_id,sc->hw_type); 913 return ENOTSUP; 914 } 915 break; 916 /* 6030 Series and 1030 Series */ 917 case IWN_DID_x030_1: 918 case IWN_DID_x030_2: 919 case IWN_DID_x030_3: 920 case IWN_DID_x030_4: 921 switch(sc->subdevice_id) { 922 case IWN_SDID_x030_1: 923 case IWN_SDID_x030_3: 924 case IWN_SDID_x030_5: 925 // iwl1030_bgn_cfg 926 case IWN_SDID_x030_2: 927 case IWN_SDID_x030_4: 928 case IWN_SDID_x030_6: 929 //iwl1030_bg_cfg 930 case IWN_SDID_x030_7: 931 case IWN_SDID_x030_10: 932 case IWN_SDID_x030_14: 933 //iwl6030_2agn_cfg 934 case IWN_SDID_x030_8: 935 case IWN_SDID_x030_11: 936 case IWN_SDID_x030_15: 937 // iwl6030_2bgn_cfg 938 case IWN_SDID_x030_9: 939 case IWN_SDID_x030_12: 940 case IWN_SDID_x030_16: 941 // iwl6030_2abg_cfg 942 case IWN_SDID_x030_13: 943 //iwl6030_2bg_cfg 944 sc->fwname = "iwn6000g2bfw"; 945 sc->limits = &iwn6000_sensitivity_limits; 946 sc->base_params = &iwn_6000g2b_base_params; 947 break; 948 default: 949 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 950 "0x%04x rev %d not supported (subdevice)\n", pid, 951 sc->subdevice_id,sc->hw_type); 952 return ENOTSUP; 953 } 954 break; 955 /* 130 Series WiFi */ 956 /* XXX: This series will need adjustment for rate. 957 * see rx_with_siso_diversity in linux kernel 958 */ 959 case IWN_DID_130_1: 960 case IWN_DID_130_2: 961 switch(sc->subdevice_id) { 962 case IWN_SDID_130_1: 963 case IWN_SDID_130_3: 964 case IWN_SDID_130_5: 965 //iwl130_bgn_cfg 966 case IWN_SDID_130_2: 967 case IWN_SDID_130_4: 968 case IWN_SDID_130_6: 969 //iwl130_bg_cfg 970 sc->fwname = "iwn6000g2bfw"; 971 sc->limits = &iwn6000_sensitivity_limits; 972 sc->base_params = &iwn_6000g2b_base_params; 973 break; 974 default: 975 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 976 "0x%04x rev %d not supported (subdevice)\n", pid, 977 sc->subdevice_id,sc->hw_type); 978 return ENOTSUP; 979 } 980 break; 981 /* 100 Series WiFi */ 982 case IWN_DID_100_1: 983 case IWN_DID_100_2: 984 switch(sc->subdevice_id) { 985 case IWN_SDID_100_1: 986 case IWN_SDID_100_2: 987 case IWN_SDID_100_3: 988 case IWN_SDID_100_4: 989 case IWN_SDID_100_5: 990 case IWN_SDID_100_6: 991 sc->limits = &iwn1000_sensitivity_limits; 992 sc->base_params = &iwn1000_base_params; 993 sc->fwname = "iwn100fw"; 994 break; 995 default: 996 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 997 "0x%04x rev %d not supported (subdevice)\n", pid, 998 sc->subdevice_id,sc->hw_type); 999 return ENOTSUP; 1000 } 1001 break; 1002 1003 /* 105 Series */ 1004 /* XXX: This series will need adjustment for rate. 1005 * see rx_with_siso_diversity in linux kernel 1006 */ 1007 case IWN_DID_105_1: 1008 case IWN_DID_105_2: 1009 switch(sc->subdevice_id) { 1010 case IWN_SDID_105_1: 1011 case IWN_SDID_105_2: 1012 case IWN_SDID_105_3: 1013 //iwl105_bgn_cfg 1014 case IWN_SDID_105_4: 1015 //iwl105_bgn_d_cfg 1016 sc->limits = &iwn2030_sensitivity_limits; 1017 sc->base_params = &iwn2000_base_params; 1018 sc->fwname = "iwn105fw"; 1019 break; 1020 default: 1021 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1022 "0x%04x rev %d not supported (subdevice)\n", pid, 1023 sc->subdevice_id,sc->hw_type); 1024 return ENOTSUP; 1025 } 1026 break; 1027 1028 /* 135 Series */ 1029 /* XXX: This series will need adjustment for rate. 1030 * see rx_with_siso_diversity in linux kernel 1031 */ 1032 case IWN_DID_135_1: 1033 case IWN_DID_135_2: 1034 switch(sc->subdevice_id) { 1035 case IWN_SDID_135_1: 1036 case IWN_SDID_135_2: 1037 case IWN_SDID_135_3: 1038 sc->limits = &iwn2030_sensitivity_limits; 1039 sc->base_params = &iwn2030_base_params; 1040 sc->fwname = "iwn135fw"; 1041 break; 1042 default: 1043 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1044 "0x%04x rev %d not supported (subdevice)\n", pid, 1045 sc->subdevice_id,sc->hw_type); 1046 return ENOTSUP; 1047 } 1048 break; 1049 1050 /* 2x00 Series */ 1051 case IWN_DID_2x00_1: 1052 case IWN_DID_2x00_2: 1053 switch(sc->subdevice_id) { 1054 case IWN_SDID_2x00_1: 1055 case IWN_SDID_2x00_2: 1056 case IWN_SDID_2x00_3: 1057 //iwl2000_2bgn_cfg 1058 case IWN_SDID_2x00_4: 1059 //iwl2000_2bgn_d_cfg 1060 sc->limits = &iwn2030_sensitivity_limits; 1061 sc->base_params = &iwn2000_base_params; 1062 sc->fwname = "iwn2000fw"; 1063 break; 1064 default: 1065 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1066 "0x%04x rev %d not supported (subdevice) \n", 1067 pid, sc->subdevice_id, sc->hw_type); 1068 return ENOTSUP; 1069 } 1070 break; 1071 /* 2x30 Series */ 1072 case IWN_DID_2x30_1: 1073 case IWN_DID_2x30_2: 1074 switch(sc->subdevice_id) { 1075 case IWN_SDID_2x30_1: 1076 case IWN_SDID_2x30_3: 1077 case IWN_SDID_2x30_5: 1078 //iwl100_bgn_cfg 1079 case IWN_SDID_2x30_2: 1080 case IWN_SDID_2x30_4: 1081 case IWN_SDID_2x30_6: 1082 //iwl100_bg_cfg 1083 sc->limits = &iwn2030_sensitivity_limits; 1084 sc->base_params = &iwn2030_base_params; 1085 sc->fwname = "iwn2030fw"; 1086 break; 1087 default: 1088 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1089 "0x%04x rev %d not supported (subdevice)\n", pid, 1090 sc->subdevice_id,sc->hw_type); 1091 return ENOTSUP; 1092 } 1093 break; 1094 /* 5x00 Series */ 1095 case IWN_DID_5x00_1: 1096 case IWN_DID_5x00_2: 1097 case IWN_DID_5x00_3: 1098 case IWN_DID_5x00_4: 1099 sc->limits = &iwn5000_sensitivity_limits; 1100 sc->base_params = &iwn5000_base_params; 1101 sc->fwname = "iwn5000fw"; 1102 switch(sc->subdevice_id) { 1103 case IWN_SDID_5x00_1: 1104 case IWN_SDID_5x00_2: 1105 case IWN_SDID_5x00_3: 1106 case IWN_SDID_5x00_4: 1107 case IWN_SDID_5x00_9: 1108 case IWN_SDID_5x00_10: 1109 case IWN_SDID_5x00_11: 1110 case IWN_SDID_5x00_12: 1111 case IWN_SDID_5x00_17: 1112 case IWN_SDID_5x00_18: 1113 case IWN_SDID_5x00_19: 1114 case IWN_SDID_5x00_20: 1115 //iwl5100_agn_cfg 1116 sc->txchainmask = IWN_ANT_B; 1117 sc->rxchainmask = IWN_ANT_AB; 1118 break; 1119 case IWN_SDID_5x00_5: 1120 case IWN_SDID_5x00_6: 1121 case IWN_SDID_5x00_13: 1122 case IWN_SDID_5x00_14: 1123 case IWN_SDID_5x00_21: 1124 case IWN_SDID_5x00_22: 1125 //iwl5100_bgn_cfg 1126 sc->txchainmask = IWN_ANT_B; 1127 sc->rxchainmask = IWN_ANT_AB; 1128 break; 1129 case IWN_SDID_5x00_7: 1130 case IWN_SDID_5x00_8: 1131 case IWN_SDID_5x00_15: 1132 case IWN_SDID_5x00_16: 1133 case IWN_SDID_5x00_23: 1134 case IWN_SDID_5x00_24: 1135 //iwl5100_abg_cfg 1136 sc->txchainmask = IWN_ANT_B; 1137 sc->rxchainmask = IWN_ANT_AB; 1138 break; 1139 case IWN_SDID_5x00_25: 1140 case IWN_SDID_5x00_26: 1141 case IWN_SDID_5x00_27: 1142 case IWN_SDID_5x00_28: 1143 case IWN_SDID_5x00_29: 1144 case IWN_SDID_5x00_30: 1145 case IWN_SDID_5x00_31: 1146 case IWN_SDID_5x00_32: 1147 case IWN_SDID_5x00_33: 1148 case IWN_SDID_5x00_34: 1149 case IWN_SDID_5x00_35: 1150 case IWN_SDID_5x00_36: 1151 //iwl5300_agn_cfg 1152 sc->txchainmask = IWN_ANT_ABC; 1153 sc->rxchainmask = IWN_ANT_ABC; 1154 break; 1155 default: 1156 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1157 "0x%04x rev %d not supported (subdevice)\n", pid, 1158 sc->subdevice_id,sc->hw_type); 1159 return ENOTSUP; 1160 } 1161 break; 1162 /* 5x50 Series */ 1163 case IWN_DID_5x50_1: 1164 case IWN_DID_5x50_2: 1165 case IWN_DID_5x50_3: 1166 case IWN_DID_5x50_4: 1167 sc->limits = &iwn5000_sensitivity_limits; 1168 sc->base_params = &iwn5000_base_params; 1169 sc->fwname = "iwn5000fw"; 1170 switch(sc->subdevice_id) { 1171 case IWN_SDID_5x50_1: 1172 case IWN_SDID_5x50_2: 1173 case IWN_SDID_5x50_3: 1174 //iwl5350_agn_cfg 1175 sc->limits = &iwn5000_sensitivity_limits; 1176 sc->base_params = &iwn5000_base_params; 1177 sc->fwname = "iwn5000fw"; 1178 break; 1179 case IWN_SDID_5x50_4: 1180 case IWN_SDID_5x50_5: 1181 case IWN_SDID_5x50_8: 1182 case IWN_SDID_5x50_9: 1183 case IWN_SDID_5x50_10: 1184 case IWN_SDID_5x50_11: 1185 //iwl5150_agn_cfg 1186 case IWN_SDID_5x50_6: 1187 case IWN_SDID_5x50_7: 1188 case IWN_SDID_5x50_12: 1189 case IWN_SDID_5x50_13: 1190 //iwl5150_abg_cfg 1191 sc->limits = &iwn5000_sensitivity_limits; 1192 sc->fwname = "iwn5150fw"; 1193 sc->base_params = &iwn_5x50_base_params; 1194 break; 1195 default: 1196 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id :" 1197 "0x%04x rev %d not supported (subdevice)\n", pid, 1198 sc->subdevice_id,sc->hw_type); 1199 return ENOTSUP; 1200 } 1201 break; 1202 default: 1203 device_printf(sc->sc_dev, "adapter type id : 0x%04x sub id : 0x%04x" 1204 "rev 0x%08x not supported (device)\n", pid, sc->subdevice_id, 1205 sc->hw_type); 1206 return ENOTSUP; 1207 } 1208 return 0; 1209 } 1210 1211 static int 1212 iwn4965_attach(struct iwn_softc *sc, uint16_t pid) 1213 { 1214 struct iwn_ops *ops = &sc->ops; 1215 1216 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1217 ops->load_firmware = iwn4965_load_firmware; 1218 ops->read_eeprom = iwn4965_read_eeprom; 1219 ops->post_alive = iwn4965_post_alive; 1220 ops->nic_config = iwn4965_nic_config; 1221 ops->update_sched = iwn4965_update_sched; 1222 ops->get_temperature = iwn4965_get_temperature; 1223 ops->get_rssi = iwn4965_get_rssi; 1224 ops->set_txpower = iwn4965_set_txpower; 1225 ops->init_gains = iwn4965_init_gains; 1226 ops->set_gains = iwn4965_set_gains; 1227 ops->add_node = iwn4965_add_node; 1228 ops->tx_done = iwn4965_tx_done; 1229 ops->ampdu_tx_start = iwn4965_ampdu_tx_start; 1230 ops->ampdu_tx_stop = iwn4965_ampdu_tx_stop; 1231 sc->ntxqs = IWN4965_NTXQUEUES; 1232 sc->firstaggqueue = IWN4965_FIRSTAGGQUEUE; 1233 sc->ndmachnls = IWN4965_NDMACHNLS; 1234 sc->broadcast_id = IWN4965_ID_BROADCAST; 1235 sc->rxonsz = IWN4965_RXONSZ; 1236 sc->schedsz = IWN4965_SCHEDSZ; 1237 sc->fw_text_maxsz = IWN4965_FW_TEXT_MAXSZ; 1238 sc->fw_data_maxsz = IWN4965_FW_DATA_MAXSZ; 1239 sc->fwsz = IWN4965_FWSZ; 1240 sc->sched_txfact_addr = IWN4965_SCHED_TXFACT; 1241 sc->limits = &iwn4965_sensitivity_limits; 1242 sc->fwname = "iwn4965fw"; 1243 /* Override chains masks, ROM is known to be broken. */ 1244 sc->txchainmask = IWN_ANT_AB; 1245 sc->rxchainmask = IWN_ANT_ABC; 1246 /* Enable normal btcoex */ 1247 sc->sc_flags |= IWN_FLAG_BTCOEX; 1248 1249 DPRINTF(sc, IWN_DEBUG_TRACE, "%s: end\n",__func__); 1250 1251 return 0; 1252 } 1253 1254 static int 1255 iwn5000_attach(struct iwn_softc *sc, uint16_t pid) 1256 { 1257 struct iwn_ops *ops = &sc->ops; 1258 1259 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1260 1261 ops->load_firmware = iwn5000_load_firmware; 1262 ops->read_eeprom = iwn5000_read_eeprom; 1263 ops->post_alive = iwn5000_post_alive; 1264 ops->nic_config = iwn5000_nic_config; 1265 ops->update_sched = iwn5000_update_sched; 1266 ops->get_temperature = iwn5000_get_temperature; 1267 ops->get_rssi = iwn5000_get_rssi; 1268 ops->set_txpower = iwn5000_set_txpower; 1269 ops->init_gains = iwn5000_init_gains; 1270 ops->set_gains = iwn5000_set_gains; 1271 ops->add_node = iwn5000_add_node; 1272 ops->tx_done = iwn5000_tx_done; 1273 ops->ampdu_tx_start = iwn5000_ampdu_tx_start; 1274 ops->ampdu_tx_stop = iwn5000_ampdu_tx_stop; 1275 sc->ntxqs = IWN5000_NTXQUEUES; 1276 sc->firstaggqueue = IWN5000_FIRSTAGGQUEUE; 1277 sc->ndmachnls = IWN5000_NDMACHNLS; 1278 sc->broadcast_id = IWN5000_ID_BROADCAST; 1279 sc->rxonsz = IWN5000_RXONSZ; 1280 sc->schedsz = IWN5000_SCHEDSZ; 1281 sc->fw_text_maxsz = IWN5000_FW_TEXT_MAXSZ; 1282 sc->fw_data_maxsz = IWN5000_FW_DATA_MAXSZ; 1283 sc->fwsz = IWN5000_FWSZ; 1284 sc->sched_txfact_addr = IWN5000_SCHED_TXFACT; 1285 sc->reset_noise_gain = IWN5000_PHY_CALIB_RESET_NOISE_GAIN; 1286 sc->noise_gain = IWN5000_PHY_CALIB_NOISE_GAIN; 1287 1288 return 0; 1289 } 1290 1291 /* 1292 * Attach the interface to 802.11 radiotap. 1293 */ 1294 static void 1295 iwn_radiotap_attach(struct iwn_softc *sc) 1296 { 1297 1298 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1299 ieee80211_radiotap_attach(&sc->sc_ic, 1300 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 1301 IWN_TX_RADIOTAP_PRESENT, 1302 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 1303 IWN_RX_RADIOTAP_PRESENT); 1304 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1305 } 1306 1307 static void 1308 iwn_sysctlattach(struct iwn_softc *sc) 1309 { 1310 #ifdef IWN_DEBUG 1311 struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); 1312 struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); 1313 1314 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1315 "debug", CTLFLAG_RW, &sc->sc_debug, sc->sc_debug, 1316 "control debugging printfs"); 1317 #endif 1318 } 1319 1320 static struct ieee80211vap * 1321 iwn_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 1322 enum ieee80211_opmode opmode, int flags, 1323 const uint8_t bssid[IEEE80211_ADDR_LEN], 1324 const uint8_t mac[IEEE80211_ADDR_LEN]) 1325 { 1326 struct iwn_softc *sc = ic->ic_softc; 1327 struct iwn_vap *ivp; 1328 struct ieee80211vap *vap; 1329 1330 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ 1331 return NULL; 1332 1333 ivp = malloc(sizeof(struct iwn_vap), M_80211_VAP, M_WAITOK | M_ZERO); 1334 vap = &ivp->iv_vap; 1335 ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); 1336 ivp->ctx = IWN_RXON_BSS_CTX; 1337 vap->iv_bmissthreshold = 10; /* override default */ 1338 /* Override with driver methods. */ 1339 ivp->iv_newstate = vap->iv_newstate; 1340 vap->iv_newstate = iwn_newstate; 1341 sc->ivap[IWN_RXON_BSS_CTX] = vap; 1342 1343 ieee80211_ratectl_init(vap); 1344 /* Complete setup. */ 1345 ieee80211_vap_attach(vap, iwn_media_change, ieee80211_media_status, 1346 mac); 1347 ic->ic_opmode = opmode; 1348 return vap; 1349 } 1350 1351 static void 1352 iwn_vap_delete(struct ieee80211vap *vap) 1353 { 1354 struct iwn_vap *ivp = IWN_VAP(vap); 1355 1356 ieee80211_ratectl_deinit(vap); 1357 ieee80211_vap_detach(vap); 1358 free(ivp, M_80211_VAP); 1359 } 1360 1361 static void 1362 iwn_xmit_queue_drain(struct iwn_softc *sc) 1363 { 1364 struct mbuf *m; 1365 struct ieee80211_node *ni; 1366 1367 IWN_LOCK_ASSERT(sc); 1368 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) { 1369 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 1370 ieee80211_free_node(ni); 1371 m_freem(m); 1372 } 1373 } 1374 1375 static int 1376 iwn_xmit_queue_enqueue(struct iwn_softc *sc, struct mbuf *m) 1377 { 1378 1379 IWN_LOCK_ASSERT(sc); 1380 return (mbufq_enqueue(&sc->sc_xmit_queue, m)); 1381 } 1382 1383 static int 1384 iwn_detach(device_t dev) 1385 { 1386 struct iwn_softc *sc = device_get_softc(dev); 1387 int qid; 1388 1389 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1390 1391 if (sc->sc_ic.ic_softc != NULL) { 1392 /* Free the mbuf queue and node references */ 1393 IWN_LOCK(sc); 1394 iwn_xmit_queue_drain(sc); 1395 IWN_UNLOCK(sc); 1396 1397 ieee80211_draintask(&sc->sc_ic, &sc->sc_reinit_task); 1398 ieee80211_draintask(&sc->sc_ic, &sc->sc_radioon_task); 1399 ieee80211_draintask(&sc->sc_ic, &sc->sc_radiooff_task); 1400 iwn_stop(sc); 1401 1402 taskqueue_drain_all(sc->sc_tq); 1403 taskqueue_free(sc->sc_tq); 1404 1405 callout_drain(&sc->watchdog_to); 1406 callout_drain(&sc->calib_to); 1407 ieee80211_ifdetach(&sc->sc_ic); 1408 } 1409 1410 /* Uninstall interrupt handler. */ 1411 if (sc->irq != NULL) { 1412 bus_teardown_intr(dev, sc->irq, sc->sc_ih); 1413 bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), 1414 sc->irq); 1415 pci_release_msi(dev); 1416 } 1417 1418 /* Free DMA resources. */ 1419 iwn_free_rx_ring(sc, &sc->rxq); 1420 for (qid = 0; qid < sc->ntxqs; qid++) 1421 iwn_free_tx_ring(sc, &sc->txq[qid]); 1422 iwn_free_sched(sc); 1423 iwn_free_kw(sc); 1424 if (sc->ict != NULL) 1425 iwn_free_ict(sc); 1426 iwn_free_fwmem(sc); 1427 1428 if (sc->mem != NULL) 1429 bus_release_resource(dev, SYS_RES_MEMORY, 1430 rman_get_rid(sc->mem), sc->mem); 1431 1432 if (sc->sc_cdev) { 1433 destroy_dev(sc->sc_cdev); 1434 sc->sc_cdev = NULL; 1435 } 1436 1437 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n", __func__); 1438 IWN_LOCK_DESTROY(sc); 1439 return 0; 1440 } 1441 1442 static int 1443 iwn_shutdown(device_t dev) 1444 { 1445 struct iwn_softc *sc = device_get_softc(dev); 1446 1447 iwn_stop(sc); 1448 return 0; 1449 } 1450 1451 static int 1452 iwn_suspend(device_t dev) 1453 { 1454 struct iwn_softc *sc = device_get_softc(dev); 1455 1456 ieee80211_suspend_all(&sc->sc_ic); 1457 return 0; 1458 } 1459 1460 static int 1461 iwn_resume(device_t dev) 1462 { 1463 struct iwn_softc *sc = device_get_softc(dev); 1464 1465 /* Clear device-specific "PCI retry timeout" register (41h). */ 1466 pci_write_config(dev, 0x41, 0, 1); 1467 1468 ieee80211_resume_all(&sc->sc_ic); 1469 return 0; 1470 } 1471 1472 static int 1473 iwn_nic_lock(struct iwn_softc *sc) 1474 { 1475 int ntries; 1476 1477 /* Request exclusive access to NIC. */ 1478 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1479 1480 /* Spin until we actually get the lock. */ 1481 for (ntries = 0; ntries < 1000; ntries++) { 1482 if ((IWN_READ(sc, IWN_GP_CNTRL) & 1483 (IWN_GP_CNTRL_MAC_ACCESS_ENA | IWN_GP_CNTRL_SLEEP)) == 1484 IWN_GP_CNTRL_MAC_ACCESS_ENA) 1485 return 0; 1486 DELAY(10); 1487 } 1488 return ETIMEDOUT; 1489 } 1490 1491 static __inline void 1492 iwn_nic_unlock(struct iwn_softc *sc) 1493 { 1494 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_MAC_ACCESS_REQ); 1495 } 1496 1497 static __inline uint32_t 1498 iwn_prph_read(struct iwn_softc *sc, uint32_t addr) 1499 { 1500 IWN_WRITE(sc, IWN_PRPH_RADDR, IWN_PRPH_DWORD | addr); 1501 IWN_BARRIER_READ_WRITE(sc); 1502 return IWN_READ(sc, IWN_PRPH_RDATA); 1503 } 1504 1505 static __inline void 1506 iwn_prph_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1507 { 1508 IWN_WRITE(sc, IWN_PRPH_WADDR, IWN_PRPH_DWORD | addr); 1509 IWN_BARRIER_WRITE(sc); 1510 IWN_WRITE(sc, IWN_PRPH_WDATA, data); 1511 } 1512 1513 static __inline void 1514 iwn_prph_setbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1515 { 1516 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) | mask); 1517 } 1518 1519 static __inline void 1520 iwn_prph_clrbits(struct iwn_softc *sc, uint32_t addr, uint32_t mask) 1521 { 1522 iwn_prph_write(sc, addr, iwn_prph_read(sc, addr) & ~mask); 1523 } 1524 1525 static __inline void 1526 iwn_prph_write_region_4(struct iwn_softc *sc, uint32_t addr, 1527 const uint32_t *data, int count) 1528 { 1529 for (; count > 0; count--, data++, addr += 4) 1530 iwn_prph_write(sc, addr, *data); 1531 } 1532 1533 static __inline uint32_t 1534 iwn_mem_read(struct iwn_softc *sc, uint32_t addr) 1535 { 1536 IWN_WRITE(sc, IWN_MEM_RADDR, addr); 1537 IWN_BARRIER_READ_WRITE(sc); 1538 return IWN_READ(sc, IWN_MEM_RDATA); 1539 } 1540 1541 static __inline void 1542 iwn_mem_write(struct iwn_softc *sc, uint32_t addr, uint32_t data) 1543 { 1544 IWN_WRITE(sc, IWN_MEM_WADDR, addr); 1545 IWN_BARRIER_WRITE(sc); 1546 IWN_WRITE(sc, IWN_MEM_WDATA, data); 1547 } 1548 1549 static __inline void 1550 iwn_mem_write_2(struct iwn_softc *sc, uint32_t addr, uint16_t data) 1551 { 1552 uint32_t tmp; 1553 1554 tmp = iwn_mem_read(sc, addr & ~3); 1555 if (addr & 3) 1556 tmp = (tmp & 0x0000ffff) | data << 16; 1557 else 1558 tmp = (tmp & 0xffff0000) | data; 1559 iwn_mem_write(sc, addr & ~3, tmp); 1560 } 1561 1562 static __inline void 1563 iwn_mem_read_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t *data, 1564 int count) 1565 { 1566 for (; count > 0; count--, addr += 4) 1567 *data++ = iwn_mem_read(sc, addr); 1568 } 1569 1570 static __inline void 1571 iwn_mem_set_region_4(struct iwn_softc *sc, uint32_t addr, uint32_t val, 1572 int count) 1573 { 1574 for (; count > 0; count--, addr += 4) 1575 iwn_mem_write(sc, addr, val); 1576 } 1577 1578 static int 1579 iwn_eeprom_lock(struct iwn_softc *sc) 1580 { 1581 int i, ntries; 1582 1583 for (i = 0; i < 100; i++) { 1584 /* Request exclusive access to EEPROM. */ 1585 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 1586 IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1587 1588 /* Spin until we actually get the lock. */ 1589 for (ntries = 0; ntries < 100; ntries++) { 1590 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 1591 IWN_HW_IF_CONFIG_EEPROM_LOCKED) 1592 return 0; 1593 DELAY(10); 1594 } 1595 } 1596 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end timeout\n", __func__); 1597 return ETIMEDOUT; 1598 } 1599 1600 static __inline void 1601 iwn_eeprom_unlock(struct iwn_softc *sc) 1602 { 1603 IWN_CLRBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_EEPROM_LOCKED); 1604 } 1605 1606 /* 1607 * Initialize access by host to One Time Programmable ROM. 1608 * NB: This kind of ROM can be found on 1000 or 6000 Series only. 1609 */ 1610 static int 1611 iwn_init_otprom(struct iwn_softc *sc) 1612 { 1613 uint16_t prev, base, next; 1614 int count, error; 1615 1616 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1617 1618 /* Wait for clock stabilization before accessing prph. */ 1619 if ((error = iwn_clock_wait(sc)) != 0) 1620 return error; 1621 1622 if ((error = iwn_nic_lock(sc)) != 0) 1623 return error; 1624 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1625 DELAY(5); 1626 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_RESET_REQ); 1627 iwn_nic_unlock(sc); 1628 1629 /* Set auto clock gate disable bit for HW with OTP shadow RAM. */ 1630 if (sc->base_params->shadow_ram_support) { 1631 IWN_SETBITS(sc, IWN_DBG_LINK_PWR_MGMT, 1632 IWN_RESET_LINK_PWR_MGMT_DIS); 1633 } 1634 IWN_CLRBITS(sc, IWN_EEPROM_GP, IWN_EEPROM_GP_IF_OWNER); 1635 /* Clear ECC status. */ 1636 IWN_SETBITS(sc, IWN_OTP_GP, 1637 IWN_OTP_GP_ECC_CORR_STTS | IWN_OTP_GP_ECC_UNCORR_STTS); 1638 1639 /* 1640 * Find the block before last block (contains the EEPROM image) 1641 * for HW without OTP shadow RAM. 1642 */ 1643 if (! sc->base_params->shadow_ram_support) { 1644 /* Switch to absolute addressing mode. */ 1645 IWN_CLRBITS(sc, IWN_OTP_GP, IWN_OTP_GP_RELATIVE_ACCESS); 1646 base = prev = 0; 1647 for (count = 0; count < sc->base_params->max_ll_items; 1648 count++) { 1649 error = iwn_read_prom_data(sc, base, &next, 2); 1650 if (error != 0) 1651 return error; 1652 if (next == 0) /* End of linked-list. */ 1653 break; 1654 prev = base; 1655 base = le16toh(next); 1656 } 1657 if (count == 0 || count == sc->base_params->max_ll_items) 1658 return EIO; 1659 /* Skip "next" word. */ 1660 sc->prom_base = prev + 1; 1661 } 1662 1663 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1664 1665 return 0; 1666 } 1667 1668 static int 1669 iwn_read_prom_data(struct iwn_softc *sc, uint32_t addr, void *data, int count) 1670 { 1671 uint8_t *out = data; 1672 uint32_t val, tmp; 1673 int ntries; 1674 1675 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1676 1677 addr += sc->prom_base; 1678 for (; count > 0; count -= 2, addr++) { 1679 IWN_WRITE(sc, IWN_EEPROM, addr << 2); 1680 for (ntries = 0; ntries < 10; ntries++) { 1681 val = IWN_READ(sc, IWN_EEPROM); 1682 if (val & IWN_EEPROM_READ_VALID) 1683 break; 1684 DELAY(5); 1685 } 1686 if (ntries == 10) { 1687 device_printf(sc->sc_dev, 1688 "timeout reading ROM at 0x%x\n", addr); 1689 return ETIMEDOUT; 1690 } 1691 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 1692 /* OTPROM, check for ECC errors. */ 1693 tmp = IWN_READ(sc, IWN_OTP_GP); 1694 if (tmp & IWN_OTP_GP_ECC_UNCORR_STTS) { 1695 device_printf(sc->sc_dev, 1696 "OTPROM ECC error at 0x%x\n", addr); 1697 return EIO; 1698 } 1699 if (tmp & IWN_OTP_GP_ECC_CORR_STTS) { 1700 /* Correctable ECC error, clear bit. */ 1701 IWN_SETBITS(sc, IWN_OTP_GP, 1702 IWN_OTP_GP_ECC_CORR_STTS); 1703 } 1704 } 1705 *out++ = val >> 16; 1706 if (count > 1) 1707 *out++ = val >> 24; 1708 } 1709 1710 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 1711 1712 return 0; 1713 } 1714 1715 static void 1716 iwn_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 1717 { 1718 if (error != 0) 1719 return; 1720 KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs)); 1721 *(bus_addr_t *)arg = segs[0].ds_addr; 1722 } 1723 1724 static int 1725 iwn_dma_contig_alloc(struct iwn_softc *sc, struct iwn_dma_info *dma, 1726 void **kvap, bus_size_t size, bus_size_t alignment) 1727 { 1728 int error; 1729 1730 dma->tag = NULL; 1731 dma->size = size; 1732 1733 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment, 1734 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1735 1, size, BUS_DMA_NOWAIT, NULL, NULL, &dma->tag); 1736 if (error != 0) 1737 goto fail; 1738 1739 error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr, 1740 BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &dma->map); 1741 if (error != 0) 1742 goto fail; 1743 1744 error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size, 1745 iwn_dma_map_addr, &dma->paddr, BUS_DMA_NOWAIT); 1746 if (error != 0) 1747 goto fail; 1748 1749 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 1750 1751 if (kvap != NULL) 1752 *kvap = dma->vaddr; 1753 1754 return 0; 1755 1756 fail: iwn_dma_contig_free(dma); 1757 return error; 1758 } 1759 1760 static void 1761 iwn_dma_contig_free(struct iwn_dma_info *dma) 1762 { 1763 if (dma->vaddr != NULL) { 1764 bus_dmamap_sync(dma->tag, dma->map, 1765 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1766 bus_dmamap_unload(dma->tag, dma->map); 1767 bus_dmamem_free(dma->tag, dma->vaddr, dma->map); 1768 dma->vaddr = NULL; 1769 } 1770 if (dma->tag != NULL) { 1771 bus_dma_tag_destroy(dma->tag); 1772 dma->tag = NULL; 1773 } 1774 } 1775 1776 static int 1777 iwn_alloc_sched(struct iwn_softc *sc) 1778 { 1779 /* TX scheduler rings must be aligned on a 1KB boundary. */ 1780 return iwn_dma_contig_alloc(sc, &sc->sched_dma, (void **)&sc->sched, 1781 sc->schedsz, 1024); 1782 } 1783 1784 static void 1785 iwn_free_sched(struct iwn_softc *sc) 1786 { 1787 iwn_dma_contig_free(&sc->sched_dma); 1788 } 1789 1790 static int 1791 iwn_alloc_kw(struct iwn_softc *sc) 1792 { 1793 /* "Keep Warm" page must be aligned on a 4KB boundary. */ 1794 return iwn_dma_contig_alloc(sc, &sc->kw_dma, NULL, 4096, 4096); 1795 } 1796 1797 static void 1798 iwn_free_kw(struct iwn_softc *sc) 1799 { 1800 iwn_dma_contig_free(&sc->kw_dma); 1801 } 1802 1803 static int 1804 iwn_alloc_ict(struct iwn_softc *sc) 1805 { 1806 /* ICT table must be aligned on a 4KB boundary. */ 1807 return iwn_dma_contig_alloc(sc, &sc->ict_dma, (void **)&sc->ict, 1808 IWN_ICT_SIZE, 4096); 1809 } 1810 1811 static void 1812 iwn_free_ict(struct iwn_softc *sc) 1813 { 1814 iwn_dma_contig_free(&sc->ict_dma); 1815 } 1816 1817 static int 1818 iwn_alloc_fwmem(struct iwn_softc *sc) 1819 { 1820 /* Must be aligned on a 16-byte boundary. */ 1821 return iwn_dma_contig_alloc(sc, &sc->fw_dma, NULL, sc->fwsz, 16); 1822 } 1823 1824 static void 1825 iwn_free_fwmem(struct iwn_softc *sc) 1826 { 1827 iwn_dma_contig_free(&sc->fw_dma); 1828 } 1829 1830 static int 1831 iwn_alloc_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1832 { 1833 bus_size_t size; 1834 int i, error; 1835 1836 ring->cur = 0; 1837 1838 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1839 1840 /* Allocate RX descriptors (256-byte aligned). */ 1841 size = IWN_RX_RING_COUNT * sizeof (uint32_t); 1842 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 1843 size, 256); 1844 if (error != 0) { 1845 device_printf(sc->sc_dev, 1846 "%s: could not allocate RX ring DMA memory, error %d\n", 1847 __func__, error); 1848 goto fail; 1849 } 1850 1851 /* Allocate RX status area (16-byte aligned). */ 1852 error = iwn_dma_contig_alloc(sc, &ring->stat_dma, (void **)&ring->stat, 1853 sizeof (struct iwn_rx_status), 16); 1854 if (error != 0) { 1855 device_printf(sc->sc_dev, 1856 "%s: could not allocate RX status DMA memory, error %d\n", 1857 __func__, error); 1858 goto fail; 1859 } 1860 1861 /* Create RX buffer DMA tag. */ 1862 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 1863 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1864 IWN_RBUF_SIZE, 1, IWN_RBUF_SIZE, BUS_DMA_NOWAIT, NULL, NULL, 1865 &ring->data_dmat); 1866 if (error != 0) { 1867 device_printf(sc->sc_dev, 1868 "%s: could not create RX buf DMA tag, error %d\n", 1869 __func__, error); 1870 goto fail; 1871 } 1872 1873 /* 1874 * Allocate and map RX buffers. 1875 */ 1876 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1877 struct iwn_rx_data *data = &ring->data[i]; 1878 bus_addr_t paddr; 1879 1880 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 1881 if (error != 0) { 1882 device_printf(sc->sc_dev, 1883 "%s: could not create RX buf DMA map, error %d\n", 1884 __func__, error); 1885 goto fail; 1886 } 1887 1888 data->m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, 1889 IWN_RBUF_SIZE); 1890 if (data->m == NULL) { 1891 device_printf(sc->sc_dev, 1892 "%s: could not allocate RX mbuf\n", __func__); 1893 error = ENOBUFS; 1894 goto fail; 1895 } 1896 1897 error = bus_dmamap_load(ring->data_dmat, data->map, 1898 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 1899 &paddr, BUS_DMA_NOWAIT); 1900 if (error != 0 && error != EFBIG) { 1901 device_printf(sc->sc_dev, 1902 "%s: can't map mbuf, error %d\n", __func__, 1903 error); 1904 goto fail; 1905 } 1906 1907 /* Set physical address of RX buffer (256-byte aligned). */ 1908 ring->desc[i] = htole32(paddr >> 8); 1909 } 1910 1911 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 1912 BUS_DMASYNC_PREWRITE); 1913 1914 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 1915 1916 return 0; 1917 1918 fail: iwn_free_rx_ring(sc, ring); 1919 1920 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 1921 1922 return error; 1923 } 1924 1925 static void 1926 iwn_reset_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1927 { 1928 int ntries; 1929 1930 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 1931 1932 if (iwn_nic_lock(sc) == 0) { 1933 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 1934 for (ntries = 0; ntries < 1000; ntries++) { 1935 if (IWN_READ(sc, IWN_FH_RX_STATUS) & 1936 IWN_FH_RX_STATUS_IDLE) 1937 break; 1938 DELAY(10); 1939 } 1940 iwn_nic_unlock(sc); 1941 } 1942 ring->cur = 0; 1943 sc->last_rx_valid = 0; 1944 } 1945 1946 static void 1947 iwn_free_rx_ring(struct iwn_softc *sc, struct iwn_rx_ring *ring) 1948 { 1949 int i; 1950 1951 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 1952 1953 iwn_dma_contig_free(&ring->desc_dma); 1954 iwn_dma_contig_free(&ring->stat_dma); 1955 1956 for (i = 0; i < IWN_RX_RING_COUNT; i++) { 1957 struct iwn_rx_data *data = &ring->data[i]; 1958 1959 if (data->m != NULL) { 1960 bus_dmamap_sync(ring->data_dmat, data->map, 1961 BUS_DMASYNC_POSTREAD); 1962 bus_dmamap_unload(ring->data_dmat, data->map); 1963 m_freem(data->m); 1964 data->m = NULL; 1965 } 1966 if (data->map != NULL) 1967 bus_dmamap_destroy(ring->data_dmat, data->map); 1968 } 1969 if (ring->data_dmat != NULL) { 1970 bus_dma_tag_destroy(ring->data_dmat); 1971 ring->data_dmat = NULL; 1972 } 1973 } 1974 1975 static int 1976 iwn_alloc_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring, int qid) 1977 { 1978 bus_addr_t paddr; 1979 bus_size_t size; 1980 int i, error; 1981 1982 ring->qid = qid; 1983 ring->queued = 0; 1984 ring->cur = 0; 1985 1986 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 1987 1988 /* Allocate TX descriptors (256-byte aligned). */ 1989 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_desc); 1990 error = iwn_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, 1991 size, 256); 1992 if (error != 0) { 1993 device_printf(sc->sc_dev, 1994 "%s: could not allocate TX ring DMA memory, error %d\n", 1995 __func__, error); 1996 goto fail; 1997 } 1998 1999 size = IWN_TX_RING_COUNT * sizeof (struct iwn_tx_cmd); 2000 error = iwn_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd, 2001 size, 4); 2002 if (error != 0) { 2003 device_printf(sc->sc_dev, 2004 "%s: could not allocate TX cmd DMA memory, error %d\n", 2005 __func__, error); 2006 goto fail; 2007 } 2008 2009 error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, 2010 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 2011 IWN_MAX_SCATTER - 1, MCLBYTES, BUS_DMA_NOWAIT, NULL, NULL, 2012 &ring->data_dmat); 2013 if (error != 0) { 2014 device_printf(sc->sc_dev, 2015 "%s: could not create TX buf DMA tag, error %d\n", 2016 __func__, error); 2017 goto fail; 2018 } 2019 2020 paddr = ring->cmd_dma.paddr; 2021 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2022 struct iwn_tx_data *data = &ring->data[i]; 2023 2024 data->cmd_paddr = paddr; 2025 data->scratch_paddr = paddr + 12; 2026 paddr += sizeof (struct iwn_tx_cmd); 2027 2028 error = bus_dmamap_create(ring->data_dmat, 0, &data->map); 2029 if (error != 0) { 2030 device_printf(sc->sc_dev, 2031 "%s: could not create TX buf DMA map, error %d\n", 2032 __func__, error); 2033 goto fail; 2034 } 2035 } 2036 2037 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2038 2039 return 0; 2040 2041 fail: iwn_free_tx_ring(sc, ring); 2042 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2043 return error; 2044 } 2045 2046 static void 2047 iwn_reset_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2048 { 2049 int i; 2050 2051 DPRINTF(sc, IWN_DEBUG_TRACE, "->doing %s \n", __func__); 2052 2053 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2054 struct iwn_tx_data *data = &ring->data[i]; 2055 2056 if (data->m != NULL) { 2057 bus_dmamap_sync(ring->data_dmat, data->map, 2058 BUS_DMASYNC_POSTWRITE); 2059 bus_dmamap_unload(ring->data_dmat, data->map); 2060 m_freem(data->m); 2061 data->m = NULL; 2062 } 2063 if (data->ni != NULL) { 2064 ieee80211_free_node(data->ni); 2065 data->ni = NULL; 2066 } 2067 } 2068 /* Clear TX descriptors. */ 2069 memset(ring->desc, 0, ring->desc_dma.size); 2070 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 2071 BUS_DMASYNC_PREWRITE); 2072 sc->qfullmsk &= ~(1 << ring->qid); 2073 ring->queued = 0; 2074 ring->cur = 0; 2075 } 2076 2077 static void 2078 iwn_free_tx_ring(struct iwn_softc *sc, struct iwn_tx_ring *ring) 2079 { 2080 int i; 2081 2082 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s \n", __func__); 2083 2084 iwn_dma_contig_free(&ring->desc_dma); 2085 iwn_dma_contig_free(&ring->cmd_dma); 2086 2087 for (i = 0; i < IWN_TX_RING_COUNT; i++) { 2088 struct iwn_tx_data *data = &ring->data[i]; 2089 2090 if (data->m != NULL) { 2091 bus_dmamap_sync(ring->data_dmat, data->map, 2092 BUS_DMASYNC_POSTWRITE); 2093 bus_dmamap_unload(ring->data_dmat, data->map); 2094 m_freem(data->m); 2095 } 2096 if (data->map != NULL) 2097 bus_dmamap_destroy(ring->data_dmat, data->map); 2098 } 2099 if (ring->data_dmat != NULL) { 2100 bus_dma_tag_destroy(ring->data_dmat); 2101 ring->data_dmat = NULL; 2102 } 2103 } 2104 2105 static void 2106 iwn5000_ict_reset(struct iwn_softc *sc) 2107 { 2108 /* Disable interrupts. */ 2109 IWN_WRITE(sc, IWN_INT_MASK, 0); 2110 2111 /* Reset ICT table. */ 2112 memset(sc->ict, 0, IWN_ICT_SIZE); 2113 sc->ict_cur = 0; 2114 2115 /* Set physical address of ICT table (4KB aligned). */ 2116 DPRINTF(sc, IWN_DEBUG_RESET, "%s: enabling ICT\n", __func__); 2117 IWN_WRITE(sc, IWN_DRAM_INT_TBL, IWN_DRAM_INT_TBL_ENABLE | 2118 IWN_DRAM_INT_TBL_WRAP_CHECK | sc->ict_dma.paddr >> 12); 2119 2120 /* Enable periodic RX interrupt. */ 2121 sc->int_mask |= IWN_INT_RX_PERIODIC; 2122 /* Switch to ICT interrupt mode in driver. */ 2123 sc->sc_flags |= IWN_FLAG_USE_ICT; 2124 2125 /* Re-enable interrupts. */ 2126 IWN_WRITE(sc, IWN_INT, 0xffffffff); 2127 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 2128 } 2129 2130 static int 2131 iwn_read_eeprom(struct iwn_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) 2132 { 2133 struct iwn_ops *ops = &sc->ops; 2134 uint16_t val; 2135 int error; 2136 2137 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2138 2139 /* Check whether adapter has an EEPROM or an OTPROM. */ 2140 if (sc->hw_type >= IWN_HW_REV_TYPE_1000 && 2141 (IWN_READ(sc, IWN_OTP_GP) & IWN_OTP_GP_DEV_SEL_OTP)) 2142 sc->sc_flags |= IWN_FLAG_HAS_OTPROM; 2143 DPRINTF(sc, IWN_DEBUG_RESET, "%s found\n", 2144 (sc->sc_flags & IWN_FLAG_HAS_OTPROM) ? "OTPROM" : "EEPROM"); 2145 2146 /* Adapter has to be powered on for EEPROM access to work. */ 2147 if ((error = iwn_apm_init(sc)) != 0) { 2148 device_printf(sc->sc_dev, 2149 "%s: could not power ON adapter, error %d\n", __func__, 2150 error); 2151 return error; 2152 } 2153 2154 if ((IWN_READ(sc, IWN_EEPROM_GP) & 0x7) == 0) { 2155 device_printf(sc->sc_dev, "%s: bad ROM signature\n", __func__); 2156 return EIO; 2157 } 2158 if ((error = iwn_eeprom_lock(sc)) != 0) { 2159 device_printf(sc->sc_dev, "%s: could not lock ROM, error %d\n", 2160 __func__, error); 2161 return error; 2162 } 2163 if (sc->sc_flags & IWN_FLAG_HAS_OTPROM) { 2164 if ((error = iwn_init_otprom(sc)) != 0) { 2165 device_printf(sc->sc_dev, 2166 "%s: could not initialize OTPROM, error %d\n", 2167 __func__, error); 2168 return error; 2169 } 2170 } 2171 2172 iwn_read_prom_data(sc, IWN_EEPROM_SKU_CAP, &val, 2); 2173 DPRINTF(sc, IWN_DEBUG_RESET, "SKU capabilities=0x%04x\n", le16toh(val)); 2174 /* Check if HT support is bonded out. */ 2175 if (val & htole16(IWN_EEPROM_SKU_CAP_11N)) 2176 sc->sc_flags |= IWN_FLAG_HAS_11N; 2177 2178 iwn_read_prom_data(sc, IWN_EEPROM_RFCFG, &val, 2); 2179 sc->rfcfg = le16toh(val); 2180 DPRINTF(sc, IWN_DEBUG_RESET, "radio config=0x%04x\n", sc->rfcfg); 2181 /* Read Tx/Rx chains from ROM unless it's known to be broken. */ 2182 if (sc->txchainmask == 0) 2183 sc->txchainmask = IWN_RFCFG_TXANTMSK(sc->rfcfg); 2184 if (sc->rxchainmask == 0) 2185 sc->rxchainmask = IWN_RFCFG_RXANTMSK(sc->rfcfg); 2186 2187 /* Read MAC address. */ 2188 iwn_read_prom_data(sc, IWN_EEPROM_MAC, macaddr, 6); 2189 2190 /* Read adapter-specific information from EEPROM. */ 2191 ops->read_eeprom(sc); 2192 2193 iwn_apm_stop(sc); /* Power OFF adapter. */ 2194 2195 iwn_eeprom_unlock(sc); 2196 2197 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2198 2199 return 0; 2200 } 2201 2202 static void 2203 iwn4965_read_eeprom(struct iwn_softc *sc) 2204 { 2205 uint32_t addr; 2206 uint16_t val; 2207 int i; 2208 2209 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2210 2211 /* Read regulatory domain (4 ASCII characters). */ 2212 iwn_read_prom_data(sc, IWN4965_EEPROM_DOMAIN, sc->eeprom_domain, 4); 2213 2214 /* Read the list of authorized channels (20MHz ones only). */ 2215 for (i = 0; i < IWN_NBANDS - 1; i++) { 2216 addr = iwn4965_regulatory_bands[i]; 2217 iwn_read_eeprom_channels(sc, i, addr); 2218 } 2219 2220 /* Read maximum allowed TX power for 2GHz and 5GHz bands. */ 2221 iwn_read_prom_data(sc, IWN4965_EEPROM_MAXPOW, &val, 2); 2222 sc->maxpwr2GHz = val & 0xff; 2223 sc->maxpwr5GHz = val >> 8; 2224 /* Check that EEPROM values are within valid range. */ 2225 if (sc->maxpwr5GHz < 20 || sc->maxpwr5GHz > 50) 2226 sc->maxpwr5GHz = 38; 2227 if (sc->maxpwr2GHz < 20 || sc->maxpwr2GHz > 50) 2228 sc->maxpwr2GHz = 38; 2229 DPRINTF(sc, IWN_DEBUG_RESET, "maxpwr 2GHz=%d 5GHz=%d\n", 2230 sc->maxpwr2GHz, sc->maxpwr5GHz); 2231 2232 /* Read samples for each TX power group. */ 2233 iwn_read_prom_data(sc, IWN4965_EEPROM_BANDS, sc->bands, 2234 sizeof sc->bands); 2235 2236 /* Read voltage at which samples were taken. */ 2237 iwn_read_prom_data(sc, IWN4965_EEPROM_VOLTAGE, &val, 2); 2238 sc->eeprom_voltage = (int16_t)le16toh(val); 2239 DPRINTF(sc, IWN_DEBUG_RESET, "voltage=%d (in 0.3V)\n", 2240 sc->eeprom_voltage); 2241 2242 #ifdef IWN_DEBUG 2243 /* Print samples. */ 2244 if (sc->sc_debug & IWN_DEBUG_ANY) { 2245 for (i = 0; i < IWN_NBANDS - 1; i++) 2246 iwn4965_print_power_group(sc, i); 2247 } 2248 #endif 2249 2250 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2251 } 2252 2253 #ifdef IWN_DEBUG 2254 static void 2255 iwn4965_print_power_group(struct iwn_softc *sc, int i) 2256 { 2257 struct iwn4965_eeprom_band *band = &sc->bands[i]; 2258 struct iwn4965_eeprom_chan_samples *chans = band->chans; 2259 int j, c; 2260 2261 printf("===band %d===\n", i); 2262 printf("chan lo=%d, chan hi=%d\n", band->lo, band->hi); 2263 printf("chan1 num=%d\n", chans[0].num); 2264 for (c = 0; c < 2; c++) { 2265 for (j = 0; j < IWN_NSAMPLES; j++) { 2266 printf("chain %d, sample %d: temp=%d gain=%d " 2267 "power=%d pa_det=%d\n", c, j, 2268 chans[0].samples[c][j].temp, 2269 chans[0].samples[c][j].gain, 2270 chans[0].samples[c][j].power, 2271 chans[0].samples[c][j].pa_det); 2272 } 2273 } 2274 printf("chan2 num=%d\n", chans[1].num); 2275 for (c = 0; c < 2; c++) { 2276 for (j = 0; j < IWN_NSAMPLES; j++) { 2277 printf("chain %d, sample %d: temp=%d gain=%d " 2278 "power=%d pa_det=%d\n", c, j, 2279 chans[1].samples[c][j].temp, 2280 chans[1].samples[c][j].gain, 2281 chans[1].samples[c][j].power, 2282 chans[1].samples[c][j].pa_det); 2283 } 2284 } 2285 } 2286 #endif 2287 2288 static void 2289 iwn5000_read_eeprom(struct iwn_softc *sc) 2290 { 2291 struct iwn5000_eeprom_calib_hdr hdr; 2292 int32_t volt; 2293 uint32_t base, addr; 2294 uint16_t val; 2295 int i; 2296 2297 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2298 2299 /* Read regulatory domain (4 ASCII characters). */ 2300 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2301 base = le16toh(val); 2302 iwn_read_prom_data(sc, base + IWN5000_EEPROM_DOMAIN, 2303 sc->eeprom_domain, 4); 2304 2305 /* Read the list of authorized channels (20MHz ones only). */ 2306 for (i = 0; i < IWN_NBANDS - 1; i++) { 2307 addr = base + sc->base_params->regulatory_bands[i]; 2308 iwn_read_eeprom_channels(sc, i, addr); 2309 } 2310 2311 /* Read enhanced TX power information for 6000 Series. */ 2312 if (sc->base_params->enhanced_TX_power) 2313 iwn_read_eeprom_enhinfo(sc); 2314 2315 iwn_read_prom_data(sc, IWN5000_EEPROM_CAL, &val, 2); 2316 base = le16toh(val); 2317 iwn_read_prom_data(sc, base, &hdr, sizeof hdr); 2318 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 2319 "%s: calib version=%u pa type=%u voltage=%u\n", __func__, 2320 hdr.version, hdr.pa_type, le16toh(hdr.volt)); 2321 sc->calib_ver = hdr.version; 2322 2323 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 2324 sc->eeprom_voltage = le16toh(hdr.volt); 2325 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2326 sc->eeprom_temp_high=le16toh(val); 2327 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2328 sc->eeprom_temp = le16toh(val); 2329 } 2330 2331 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 2332 /* Compute temperature offset. */ 2333 iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2); 2334 sc->eeprom_temp = le16toh(val); 2335 iwn_read_prom_data(sc, base + IWN5000_EEPROM_VOLT, &val, 2); 2336 volt = le16toh(val); 2337 sc->temp_off = sc->eeprom_temp - (volt / -5); 2338 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "temp=%d volt=%d offset=%dK\n", 2339 sc->eeprom_temp, volt, sc->temp_off); 2340 } else { 2341 /* Read crystal calibration. */ 2342 iwn_read_prom_data(sc, base + IWN5000_EEPROM_CRYSTAL, 2343 &sc->eeprom_crystal, sizeof (uint32_t)); 2344 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "crystal calibration 0x%08x\n", 2345 le32toh(sc->eeprom_crystal)); 2346 } 2347 2348 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2349 2350 } 2351 2352 /* 2353 * Translate EEPROM flags to net80211. 2354 */ 2355 static uint32_t 2356 iwn_eeprom_channel_flags(struct iwn_eeprom_chan *channel) 2357 { 2358 uint32_t nflags; 2359 2360 nflags = 0; 2361 if ((channel->flags & IWN_EEPROM_CHAN_ACTIVE) == 0) 2362 nflags |= IEEE80211_CHAN_PASSIVE; 2363 if ((channel->flags & IWN_EEPROM_CHAN_IBSS) == 0) 2364 nflags |= IEEE80211_CHAN_NOADHOC; 2365 if (channel->flags & IWN_EEPROM_CHAN_RADAR) { 2366 nflags |= IEEE80211_CHAN_DFS; 2367 /* XXX apparently IBSS may still be marked */ 2368 nflags |= IEEE80211_CHAN_NOADHOC; 2369 } 2370 2371 return nflags; 2372 } 2373 2374 static void 2375 iwn_read_eeprom_band(struct iwn_softc *sc, int n) 2376 { 2377 struct ieee80211com *ic = &sc->sc_ic; 2378 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2379 const struct iwn_chan_band *band = &iwn_bands[n]; 2380 struct ieee80211_channel *c; 2381 uint8_t chan; 2382 int i, nflags; 2383 2384 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2385 2386 for (i = 0; i < band->nchan; i++) { 2387 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2388 DPRINTF(sc, IWN_DEBUG_RESET, 2389 "skip chan %d flags 0x%x maxpwr %d\n", 2390 band->chan[i], channels[i].flags, 2391 channels[i].maxpwr); 2392 continue; 2393 } 2394 chan = band->chan[i]; 2395 nflags = iwn_eeprom_channel_flags(&channels[i]); 2396 2397 c = &ic->ic_channels[ic->ic_nchans++]; 2398 c->ic_ieee = chan; 2399 c->ic_maxregpower = channels[i].maxpwr; 2400 c->ic_maxpower = 2*c->ic_maxregpower; 2401 2402 if (n == 0) { /* 2GHz band */ 2403 c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_G); 2404 /* G =>'s B is supported */ 2405 c->ic_flags = IEEE80211_CHAN_B | nflags; 2406 c = &ic->ic_channels[ic->ic_nchans++]; 2407 c[0] = c[-1]; 2408 c->ic_flags = IEEE80211_CHAN_G | nflags; 2409 } else { /* 5GHz band */ 2410 c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A); 2411 c->ic_flags = IEEE80211_CHAN_A | nflags; 2412 } 2413 2414 /* Save maximum allowed TX power for this channel. */ 2415 sc->maxpwr[chan] = channels[i].maxpwr; 2416 2417 DPRINTF(sc, IWN_DEBUG_RESET, 2418 "add chan %d flags 0x%x maxpwr %d\n", chan, 2419 channels[i].flags, channels[i].maxpwr); 2420 2421 if (sc->sc_flags & IWN_FLAG_HAS_11N) { 2422 /* add HT20, HT40 added separately */ 2423 c = &ic->ic_channels[ic->ic_nchans++]; 2424 c[0] = c[-1]; 2425 c->ic_flags |= IEEE80211_CHAN_HT20; 2426 } 2427 } 2428 2429 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2430 2431 } 2432 2433 static void 2434 iwn_read_eeprom_ht40(struct iwn_softc *sc, int n) 2435 { 2436 struct ieee80211com *ic = &sc->sc_ic; 2437 struct iwn_eeprom_chan *channels = sc->eeprom_channels[n]; 2438 const struct iwn_chan_band *band = &iwn_bands[n]; 2439 struct ieee80211_channel *c, *cent, *extc; 2440 uint8_t chan; 2441 int i, nflags; 2442 2443 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s start\n", __func__); 2444 2445 if (!(sc->sc_flags & IWN_FLAG_HAS_11N)) { 2446 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end no 11n\n", __func__); 2447 return; 2448 } 2449 2450 for (i = 0; i < band->nchan; i++) { 2451 if (!(channels[i].flags & IWN_EEPROM_CHAN_VALID)) { 2452 DPRINTF(sc, IWN_DEBUG_RESET, 2453 "skip chan %d flags 0x%x maxpwr %d\n", 2454 band->chan[i], channels[i].flags, 2455 channels[i].maxpwr); 2456 continue; 2457 } 2458 chan = band->chan[i]; 2459 nflags = iwn_eeprom_channel_flags(&channels[i]); 2460 2461 /* 2462 * Each entry defines an HT40 channel pair; find the 2463 * center channel, then the extension channel above. 2464 */ 2465 cent = ieee80211_find_channel_byieee(ic, chan, 2466 (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A)); 2467 if (cent == NULL) { /* XXX shouldn't happen */ 2468 device_printf(sc->sc_dev, 2469 "%s: no entry for channel %d\n", __func__, chan); 2470 continue; 2471 } 2472 extc = ieee80211_find_channel(ic, cent->ic_freq+20, 2473 (n == 5 ? IEEE80211_CHAN_G : IEEE80211_CHAN_A)); 2474 if (extc == NULL) { 2475 DPRINTF(sc, IWN_DEBUG_RESET, 2476 "%s: skip chan %d, extension channel not found\n", 2477 __func__, chan); 2478 continue; 2479 } 2480 2481 DPRINTF(sc, IWN_DEBUG_RESET, 2482 "add ht40 chan %d flags 0x%x maxpwr %d\n", 2483 chan, channels[i].flags, channels[i].maxpwr); 2484 2485 c = &ic->ic_channels[ic->ic_nchans++]; 2486 c[0] = cent[0]; 2487 c->ic_extieee = extc->ic_ieee; 2488 c->ic_flags &= ~IEEE80211_CHAN_HT; 2489 c->ic_flags |= IEEE80211_CHAN_HT40U | nflags; 2490 c = &ic->ic_channels[ic->ic_nchans++]; 2491 c[0] = extc[0]; 2492 c->ic_extieee = cent->ic_ieee; 2493 c->ic_flags &= ~IEEE80211_CHAN_HT; 2494 c->ic_flags |= IEEE80211_CHAN_HT40D | nflags; 2495 } 2496 2497 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2498 2499 } 2500 2501 static void 2502 iwn_read_eeprom_channels(struct iwn_softc *sc, int n, uint32_t addr) 2503 { 2504 struct ieee80211com *ic = &sc->sc_ic; 2505 2506 iwn_read_prom_data(sc, addr, &sc->eeprom_channels[n], 2507 iwn_bands[n].nchan * sizeof (struct iwn_eeprom_chan)); 2508 2509 if (n < 5) 2510 iwn_read_eeprom_band(sc, n); 2511 else 2512 iwn_read_eeprom_ht40(sc, n); 2513 ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans); 2514 } 2515 2516 static struct iwn_eeprom_chan * 2517 iwn_find_eeprom_channel(struct iwn_softc *sc, struct ieee80211_channel *c) 2518 { 2519 int band, chan, i, j; 2520 2521 if (IEEE80211_IS_CHAN_HT40(c)) { 2522 band = IEEE80211_IS_CHAN_5GHZ(c) ? 6 : 5; 2523 if (IEEE80211_IS_CHAN_HT40D(c)) 2524 chan = c->ic_extieee; 2525 else 2526 chan = c->ic_ieee; 2527 for (i = 0; i < iwn_bands[band].nchan; i++) { 2528 if (iwn_bands[band].chan[i] == chan) 2529 return &sc->eeprom_channels[band][i]; 2530 } 2531 } else { 2532 for (j = 0; j < 5; j++) { 2533 for (i = 0; i < iwn_bands[j].nchan; i++) { 2534 if (iwn_bands[j].chan[i] == c->ic_ieee) 2535 return &sc->eeprom_channels[j][i]; 2536 } 2537 } 2538 } 2539 return NULL; 2540 } 2541 2542 /* 2543 * Enforce flags read from EEPROM. 2544 */ 2545 static int 2546 iwn_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, 2547 int nchan, struct ieee80211_channel chans[]) 2548 { 2549 struct iwn_softc *sc = ic->ic_softc; 2550 int i; 2551 2552 for (i = 0; i < nchan; i++) { 2553 struct ieee80211_channel *c = &chans[i]; 2554 struct iwn_eeprom_chan *channel; 2555 2556 channel = iwn_find_eeprom_channel(sc, c); 2557 if (channel == NULL) { 2558 ic_printf(ic, "%s: invalid channel %u freq %u/0x%x\n", 2559 __func__, c->ic_ieee, c->ic_freq, c->ic_flags); 2560 return EINVAL; 2561 } 2562 c->ic_flags |= iwn_eeprom_channel_flags(channel); 2563 } 2564 2565 return 0; 2566 } 2567 2568 static void 2569 iwn_read_eeprom_enhinfo(struct iwn_softc *sc) 2570 { 2571 struct iwn_eeprom_enhinfo enhinfo[35]; 2572 struct ieee80211com *ic = &sc->sc_ic; 2573 struct ieee80211_channel *c; 2574 uint16_t val, base; 2575 int8_t maxpwr; 2576 uint8_t flags; 2577 int i, j; 2578 2579 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2580 2581 iwn_read_prom_data(sc, IWN5000_EEPROM_REG, &val, 2); 2582 base = le16toh(val); 2583 iwn_read_prom_data(sc, base + IWN6000_EEPROM_ENHINFO, 2584 enhinfo, sizeof enhinfo); 2585 2586 for (i = 0; i < nitems(enhinfo); i++) { 2587 flags = enhinfo[i].flags; 2588 if (!(flags & IWN_ENHINFO_VALID)) 2589 continue; /* Skip invalid entries. */ 2590 2591 maxpwr = 0; 2592 if (sc->txchainmask & IWN_ANT_A) 2593 maxpwr = MAX(maxpwr, enhinfo[i].chain[0]); 2594 if (sc->txchainmask & IWN_ANT_B) 2595 maxpwr = MAX(maxpwr, enhinfo[i].chain[1]); 2596 if (sc->txchainmask & IWN_ANT_C) 2597 maxpwr = MAX(maxpwr, enhinfo[i].chain[2]); 2598 if (sc->ntxchains == 2) 2599 maxpwr = MAX(maxpwr, enhinfo[i].mimo2); 2600 else if (sc->ntxchains == 3) 2601 maxpwr = MAX(maxpwr, enhinfo[i].mimo3); 2602 2603 for (j = 0; j < ic->ic_nchans; j++) { 2604 c = &ic->ic_channels[j]; 2605 if ((flags & IWN_ENHINFO_5GHZ)) { 2606 if (!IEEE80211_IS_CHAN_A(c)) 2607 continue; 2608 } else if ((flags & IWN_ENHINFO_OFDM)) { 2609 if (!IEEE80211_IS_CHAN_G(c)) 2610 continue; 2611 } else if (!IEEE80211_IS_CHAN_B(c)) 2612 continue; 2613 if ((flags & IWN_ENHINFO_HT40)) { 2614 if (!IEEE80211_IS_CHAN_HT40(c)) 2615 continue; 2616 } else { 2617 if (IEEE80211_IS_CHAN_HT40(c)) 2618 continue; 2619 } 2620 if (enhinfo[i].chan != 0 && 2621 enhinfo[i].chan != c->ic_ieee) 2622 continue; 2623 2624 DPRINTF(sc, IWN_DEBUG_RESET, 2625 "channel %d(%x), maxpwr %d\n", c->ic_ieee, 2626 c->ic_flags, maxpwr / 2); 2627 c->ic_maxregpower = maxpwr / 2; 2628 c->ic_maxpower = maxpwr; 2629 } 2630 } 2631 2632 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end\n", __func__); 2633 2634 } 2635 2636 static struct ieee80211_node * 2637 iwn_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 2638 { 2639 return malloc(sizeof (struct iwn_node), M_80211_NODE,M_NOWAIT | M_ZERO); 2640 } 2641 2642 static __inline int 2643 rate2plcp(int rate) 2644 { 2645 switch (rate & 0xff) { 2646 case 12: return 0xd; 2647 case 18: return 0xf; 2648 case 24: return 0x5; 2649 case 36: return 0x7; 2650 case 48: return 0x9; 2651 case 72: return 0xb; 2652 case 96: return 0x1; 2653 case 108: return 0x3; 2654 case 2: return 10; 2655 case 4: return 20; 2656 case 11: return 55; 2657 case 22: return 110; 2658 } 2659 return 0; 2660 } 2661 2662 static int 2663 iwn_get_1stream_tx_antmask(struct iwn_softc *sc) 2664 { 2665 2666 return IWN_LSB(sc->txchainmask); 2667 } 2668 2669 static int 2670 iwn_get_2stream_tx_antmask(struct iwn_softc *sc) 2671 { 2672 int tx; 2673 2674 /* 2675 * The '2 stream' setup is a bit .. odd. 2676 * 2677 * For NICs that support only 1 antenna, default to IWN_ANT_AB or 2678 * the firmware panics (eg Intel 5100.) 2679 * 2680 * For NICs that support two antennas, we use ANT_AB. 2681 * 2682 * For NICs that support three antennas, we use the two that 2683 * wasn't the default one. 2684 * 2685 * XXX TODO: if bluetooth (full concurrent) is enabled, restrict 2686 * this to only one antenna. 2687 */ 2688 2689 /* Default - transmit on the other antennas */ 2690 tx = (sc->txchainmask & ~IWN_LSB(sc->txchainmask)); 2691 2692 /* Now, if it's zero, set it to IWN_ANT_AB, so to not panic firmware */ 2693 if (tx == 0) 2694 tx = IWN_ANT_AB; 2695 2696 /* 2697 * If the NIC is a two-stream TX NIC, configure the TX mask to 2698 * the default chainmask 2699 */ 2700 else if (sc->ntxchains == 2) 2701 tx = sc->txchainmask; 2702 2703 return (tx); 2704 } 2705 2706 2707 2708 /* 2709 * Calculate the required PLCP value from the given rate, 2710 * to the given node. 2711 * 2712 * This will take the node configuration (eg 11n, rate table 2713 * setup, etc) into consideration. 2714 */ 2715 static uint32_t 2716 iwn_rate_to_plcp(struct iwn_softc *sc, struct ieee80211_node *ni, 2717 uint8_t rate) 2718 { 2719 struct ieee80211com *ic = ni->ni_ic; 2720 uint32_t plcp = 0; 2721 int ridx; 2722 2723 /* 2724 * If it's an MCS rate, let's set the plcp correctly 2725 * and set the relevant flags based on the node config. 2726 */ 2727 if (rate & IEEE80211_RATE_MCS) { 2728 /* 2729 * Set the initial PLCP value to be between 0->31 for 2730 * MCS 0 -> MCS 31, then set the "I'm an MCS rate!" 2731 * flag. 2732 */ 2733 plcp = IEEE80211_RV(rate) | IWN_RFLAG_MCS; 2734 2735 /* 2736 * XXX the following should only occur if both 2737 * the local configuration _and_ the remote node 2738 * advertise these capabilities. Thus this code 2739 * may need fixing! 2740 */ 2741 2742 /* 2743 * Set the channel width and guard interval. 2744 */ 2745 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { 2746 plcp |= IWN_RFLAG_HT40; 2747 if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) 2748 plcp |= IWN_RFLAG_SGI; 2749 } else if (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) { 2750 plcp |= IWN_RFLAG_SGI; 2751 } 2752 2753 /* 2754 * Ensure the selected rate matches the link quality 2755 * table entries being used. 2756 */ 2757 if (rate > 0x8f) 2758 plcp |= IWN_RFLAG_ANT(sc->txchainmask); 2759 else if (rate > 0x87) 2760 plcp |= IWN_RFLAG_ANT(iwn_get_2stream_tx_antmask(sc)); 2761 else 2762 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2763 } else { 2764 /* 2765 * Set the initial PLCP - fine for both 2766 * OFDM and CCK rates. 2767 */ 2768 plcp = rate2plcp(rate); 2769 2770 /* Set CCK flag if it's CCK */ 2771 2772 /* XXX It would be nice to have a method 2773 * to map the ridx -> phy table entry 2774 * so we could just query that, rather than 2775 * this hack to check against IWN_RIDX_OFDM6. 2776 */ 2777 ridx = ieee80211_legacy_rate_lookup(ic->ic_rt, 2778 rate & IEEE80211_RATE_VAL); 2779 if (ridx < IWN_RIDX_OFDM6 && 2780 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 2781 plcp |= IWN_RFLAG_CCK; 2782 2783 /* Set antenna configuration */ 2784 /* XXX TODO: is this the right antenna to use for legacy? */ 2785 plcp |= IWN_RFLAG_ANT(iwn_get_1stream_tx_antmask(sc)); 2786 } 2787 2788 DPRINTF(sc, IWN_DEBUG_TXRATE, "%s: rate=0x%02x, plcp=0x%08x\n", 2789 __func__, 2790 rate, 2791 plcp); 2792 2793 return (htole32(plcp)); 2794 } 2795 2796 static void 2797 iwn_newassoc(struct ieee80211_node *ni, int isnew) 2798 { 2799 /* Doesn't do anything at the moment */ 2800 } 2801 2802 static int 2803 iwn_media_change(struct ifnet *ifp) 2804 { 2805 int error; 2806 2807 error = ieee80211_media_change(ifp); 2808 /* NB: only the fixed rate can change and that doesn't need a reset */ 2809 return (error == ENETRESET ? 0 : error); 2810 } 2811 2812 static int 2813 iwn_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 2814 { 2815 struct iwn_vap *ivp = IWN_VAP(vap); 2816 struct ieee80211com *ic = vap->iv_ic; 2817 struct iwn_softc *sc = ic->ic_softc; 2818 int error = 0; 2819 2820 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2821 2822 DPRINTF(sc, IWN_DEBUG_STATE, "%s: %s -> %s\n", __func__, 2823 ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); 2824 2825 IEEE80211_UNLOCK(ic); 2826 IWN_LOCK(sc); 2827 callout_stop(&sc->calib_to); 2828 2829 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 2830 2831 switch (nstate) { 2832 case IEEE80211_S_ASSOC: 2833 if (vap->iv_state != IEEE80211_S_RUN) 2834 break; 2835 /* FALLTHROUGH */ 2836 case IEEE80211_S_AUTH: 2837 if (vap->iv_state == IEEE80211_S_AUTH) 2838 break; 2839 2840 /* 2841 * !AUTH -> AUTH transition requires state reset to handle 2842 * reassociations correctly. 2843 */ 2844 sc->rxon->associd = 0; 2845 sc->rxon->filter &= ~htole32(IWN_FILTER_BSS); 2846 sc->calib.state = IWN_CALIB_STATE_INIT; 2847 2848 /* Wait until we hear a beacon before we transmit */ 2849 sc->sc_beacon_wait = 1; 2850 2851 if ((error = iwn_auth(sc, vap)) != 0) { 2852 device_printf(sc->sc_dev, 2853 "%s: could not move to auth state\n", __func__); 2854 } 2855 break; 2856 2857 case IEEE80211_S_RUN: 2858 /* 2859 * RUN -> RUN transition; Just restart the timers. 2860 */ 2861 if (vap->iv_state == IEEE80211_S_RUN) { 2862 sc->calib_cnt = 0; 2863 break; 2864 } 2865 2866 /* Wait until we hear a beacon before we transmit */ 2867 sc->sc_beacon_wait = 1; 2868 2869 /* 2870 * !RUN -> RUN requires setting the association id 2871 * which is done with a firmware cmd. We also defer 2872 * starting the timers until that work is done. 2873 */ 2874 if ((error = iwn_run(sc, vap)) != 0) { 2875 device_printf(sc->sc_dev, 2876 "%s: could not move to run state\n", __func__); 2877 } 2878 break; 2879 2880 case IEEE80211_S_INIT: 2881 sc->calib.state = IWN_CALIB_STATE_INIT; 2882 /* 2883 * Purge the xmit queue so we don't have old frames 2884 * during a new association attempt. 2885 */ 2886 sc->sc_beacon_wait = 0; 2887 iwn_xmit_queue_drain(sc); 2888 break; 2889 2890 default: 2891 break; 2892 } 2893 IWN_UNLOCK(sc); 2894 IEEE80211_LOCK(ic); 2895 if (error != 0){ 2896 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 2897 return error; 2898 } 2899 2900 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 2901 2902 return ivp->iv_newstate(vap, nstate, arg); 2903 } 2904 2905 static void 2906 iwn_calib_timeout(void *arg) 2907 { 2908 struct iwn_softc *sc = arg; 2909 2910 IWN_LOCK_ASSERT(sc); 2911 2912 /* Force automatic TX power calibration every 60 secs. */ 2913 if (++sc->calib_cnt >= 120) { 2914 uint32_t flags = 0; 2915 2916 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s\n", 2917 "sending request for statistics"); 2918 (void)iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, 2919 sizeof flags, 1); 2920 sc->calib_cnt = 0; 2921 } 2922 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 2923 sc); 2924 } 2925 2926 /* 2927 * Process an RX_PHY firmware notification. This is usually immediately 2928 * followed by an MPDU_RX_DONE notification. 2929 */ 2930 static void 2931 iwn_rx_phy(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2932 struct iwn_rx_data *data) 2933 { 2934 struct iwn_rx_stat *stat = (struct iwn_rx_stat *)(desc + 1); 2935 2936 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: received PHY stats\n", __func__); 2937 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 2938 2939 /* Save RX statistics, they will be used on MPDU_RX_DONE. */ 2940 memcpy(&sc->last_rx_stat, stat, sizeof (*stat)); 2941 sc->last_rx_valid = 1; 2942 } 2943 2944 /* 2945 * Process an RX_DONE (4965AGN only) or MPDU_RX_DONE firmware notification. 2946 * Each MPDU_RX_DONE notification must be preceded by an RX_PHY one. 2947 */ 2948 static void 2949 iwn_rx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 2950 struct iwn_rx_data *data) 2951 { 2952 struct iwn_ops *ops = &sc->ops; 2953 struct ieee80211com *ic = &sc->sc_ic; 2954 struct iwn_rx_ring *ring = &sc->rxq; 2955 struct ieee80211_frame *wh; 2956 struct ieee80211_node *ni; 2957 struct mbuf *m, *m1; 2958 struct iwn_rx_stat *stat; 2959 caddr_t head; 2960 bus_addr_t paddr; 2961 uint32_t flags; 2962 int error, len, rssi, nf; 2963 2964 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 2965 2966 if (desc->type == IWN_MPDU_RX_DONE) { 2967 /* Check for prior RX_PHY notification. */ 2968 if (!sc->last_rx_valid) { 2969 DPRINTF(sc, IWN_DEBUG_ANY, 2970 "%s: missing RX_PHY\n", __func__); 2971 return; 2972 } 2973 stat = &sc->last_rx_stat; 2974 } else 2975 stat = (struct iwn_rx_stat *)(desc + 1); 2976 2977 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 2978 2979 if (stat->cfg_phy_len > IWN_STAT_MAXLEN) { 2980 device_printf(sc->sc_dev, 2981 "%s: invalid RX statistic header, len %d\n", __func__, 2982 stat->cfg_phy_len); 2983 return; 2984 } 2985 if (desc->type == IWN_MPDU_RX_DONE) { 2986 struct iwn_rx_mpdu *mpdu = (struct iwn_rx_mpdu *)(desc + 1); 2987 head = (caddr_t)(mpdu + 1); 2988 len = le16toh(mpdu->len); 2989 } else { 2990 head = (caddr_t)(stat + 1) + stat->cfg_phy_len; 2991 len = le16toh(stat->len); 2992 } 2993 2994 flags = le32toh(*(uint32_t *)(head + len)); 2995 2996 /* Discard frames with a bad FCS early. */ 2997 if ((flags & IWN_RX_NOERROR) != IWN_RX_NOERROR) { 2998 DPRINTF(sc, IWN_DEBUG_RECV, "%s: RX flags error %x\n", 2999 __func__, flags); 3000 counter_u64_add(ic->ic_ierrors, 1); 3001 return; 3002 } 3003 /* Discard frames that are too short. */ 3004 if (len < sizeof (struct ieee80211_frame_ack)) { 3005 DPRINTF(sc, IWN_DEBUG_RECV, "%s: frame too short: %d\n", 3006 __func__, len); 3007 counter_u64_add(ic->ic_ierrors, 1); 3008 return; 3009 } 3010 3011 m1 = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, IWN_RBUF_SIZE); 3012 if (m1 == NULL) { 3013 DPRINTF(sc, IWN_DEBUG_ANY, "%s: no mbuf to restock ring\n", 3014 __func__); 3015 counter_u64_add(ic->ic_ierrors, 1); 3016 return; 3017 } 3018 bus_dmamap_unload(ring->data_dmat, data->map); 3019 3020 error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m1, void *), 3021 IWN_RBUF_SIZE, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 3022 if (error != 0 && error != EFBIG) { 3023 device_printf(sc->sc_dev, 3024 "%s: bus_dmamap_load failed, error %d\n", __func__, error); 3025 m_freem(m1); 3026 3027 /* Try to reload the old mbuf. */ 3028 error = bus_dmamap_load(ring->data_dmat, data->map, 3029 mtod(data->m, void *), IWN_RBUF_SIZE, iwn_dma_map_addr, 3030 &paddr, BUS_DMA_NOWAIT); 3031 if (error != 0 && error != EFBIG) { 3032 panic("%s: could not load old RX mbuf", __func__); 3033 } 3034 /* Physical address may have changed. */ 3035 ring->desc[ring->cur] = htole32(paddr >> 8); 3036 bus_dmamap_sync(ring->data_dmat, ring->desc_dma.map, 3037 BUS_DMASYNC_PREWRITE); 3038 counter_u64_add(ic->ic_ierrors, 1); 3039 return; 3040 } 3041 3042 m = data->m; 3043 data->m = m1; 3044 /* Update RX descriptor. */ 3045 ring->desc[ring->cur] = htole32(paddr >> 8); 3046 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 3047 BUS_DMASYNC_PREWRITE); 3048 3049 /* Finalize mbuf. */ 3050 m->m_data = head; 3051 m->m_pkthdr.len = m->m_len = len; 3052 3053 /* Grab a reference to the source node. */ 3054 wh = mtod(m, struct ieee80211_frame *); 3055 if (len >= sizeof(struct ieee80211_frame_min)) 3056 ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); 3057 else 3058 ni = NULL; 3059 nf = (ni != NULL && ni->ni_vap->iv_state == IEEE80211_S_RUN && 3060 (ic->ic_flags & IEEE80211_F_SCAN) == 0) ? sc->noise : -95; 3061 3062 rssi = ops->get_rssi(sc, stat); 3063 3064 if (ieee80211_radiotap_active(ic)) { 3065 struct iwn_rx_radiotap_header *tap = &sc->sc_rxtap; 3066 3067 tap->wr_flags = 0; 3068 if (stat->flags & htole16(IWN_STAT_FLAG_SHPREAMBLE)) 3069 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 3070 tap->wr_dbm_antsignal = (int8_t)rssi; 3071 tap->wr_dbm_antnoise = (int8_t)nf; 3072 tap->wr_tsft = stat->tstamp; 3073 switch (stat->rate) { 3074 /* CCK rates. */ 3075 case 10: tap->wr_rate = 2; break; 3076 case 20: tap->wr_rate = 4; break; 3077 case 55: tap->wr_rate = 11; break; 3078 case 110: tap->wr_rate = 22; break; 3079 /* OFDM rates. */ 3080 case 0xd: tap->wr_rate = 12; break; 3081 case 0xf: tap->wr_rate = 18; break; 3082 case 0x5: tap->wr_rate = 24; break; 3083 case 0x7: tap->wr_rate = 36; break; 3084 case 0x9: tap->wr_rate = 48; break; 3085 case 0xb: tap->wr_rate = 72; break; 3086 case 0x1: tap->wr_rate = 96; break; 3087 case 0x3: tap->wr_rate = 108; break; 3088 /* Unknown rate: should not happen. */ 3089 default: tap->wr_rate = 0; 3090 } 3091 } 3092 3093 /* 3094 * If it's a beacon and we're waiting, then do the 3095 * wakeup. This should unblock raw_xmit/start. 3096 */ 3097 if (sc->sc_beacon_wait) { 3098 uint8_t type, subtype; 3099 /* NB: Re-assign wh */ 3100 wh = mtod(m, struct ieee80211_frame *); 3101 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3102 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 3103 /* 3104 * This assumes at this point we've received our own 3105 * beacon. 3106 */ 3107 DPRINTF(sc, IWN_DEBUG_TRACE, 3108 "%s: beacon_wait, type=%d, subtype=%d\n", 3109 __func__, type, subtype); 3110 if (type == IEEE80211_FC0_TYPE_MGT && 3111 subtype == IEEE80211_FC0_SUBTYPE_BEACON) { 3112 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, 3113 "%s: waking things up\n", __func__); 3114 /* queue taskqueue to transmit! */ 3115 taskqueue_enqueue(sc->sc_tq, &sc->sc_xmit_task); 3116 } 3117 } 3118 3119 IWN_UNLOCK(sc); 3120 3121 /* Send the frame to the 802.11 layer. */ 3122 if (ni != NULL) { 3123 if (ni->ni_flags & IEEE80211_NODE_HT) 3124 m->m_flags |= M_AMPDU; 3125 (void)ieee80211_input(ni, m, rssi - nf, nf); 3126 /* Node is no longer needed. */ 3127 ieee80211_free_node(ni); 3128 } else 3129 (void)ieee80211_input_all(ic, m, rssi - nf, nf); 3130 3131 IWN_LOCK(sc); 3132 3133 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3134 3135 } 3136 3137 /* Process an incoming Compressed BlockAck. */ 3138 static void 3139 iwn_rx_compressed_ba(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3140 struct iwn_rx_data *data) 3141 { 3142 struct iwn_ops *ops = &sc->ops; 3143 struct iwn_node *wn; 3144 struct ieee80211_node *ni; 3145 struct iwn_compressed_ba *ba = (struct iwn_compressed_ba *)(desc + 1); 3146 struct iwn_tx_ring *txq; 3147 struct iwn_tx_data *txdata; 3148 struct ieee80211_tx_ampdu *tap; 3149 struct mbuf *m; 3150 uint64_t bitmap; 3151 uint16_t ssn; 3152 uint8_t tid; 3153 int ackfailcnt = 0, i, lastidx, qid, *res, shift; 3154 int tx_ok = 0, tx_err = 0; 3155 3156 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s begin\n", __func__); 3157 3158 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3159 3160 qid = le16toh(ba->qid); 3161 txq = &sc->txq[ba->qid]; 3162 tap = sc->qid2tap[ba->qid]; 3163 tid = tap->txa_tid; 3164 wn = (void *)tap->txa_ni; 3165 3166 res = NULL; 3167 ssn = 0; 3168 if (!IEEE80211_AMPDU_RUNNING(tap)) { 3169 res = tap->txa_private; 3170 ssn = tap->txa_start & 0xfff; 3171 } 3172 3173 for (lastidx = le16toh(ba->ssn) & 0xff; txq->read != lastidx;) { 3174 txdata = &txq->data[txq->read]; 3175 3176 /* Unmap and free mbuf. */ 3177 bus_dmamap_sync(txq->data_dmat, txdata->map, 3178 BUS_DMASYNC_POSTWRITE); 3179 bus_dmamap_unload(txq->data_dmat, txdata->map); 3180 m = txdata->m, txdata->m = NULL; 3181 ni = txdata->ni, txdata->ni = NULL; 3182 3183 KASSERT(ni != NULL, ("no node")); 3184 KASSERT(m != NULL, ("no mbuf")); 3185 3186 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m); 3187 ieee80211_tx_complete(ni, m, 1); 3188 3189 txq->queued--; 3190 txq->read = (txq->read + 1) % IWN_TX_RING_COUNT; 3191 } 3192 3193 if (txq->queued == 0 && res != NULL) { 3194 iwn_nic_lock(sc); 3195 ops->ampdu_tx_stop(sc, qid, tid, ssn); 3196 iwn_nic_unlock(sc); 3197 sc->qid2tap[qid] = NULL; 3198 free(res, M_DEVBUF); 3199 return; 3200 } 3201 3202 if (wn->agg[tid].bitmap == 0) 3203 return; 3204 3205 shift = wn->agg[tid].startidx - ((le16toh(ba->seq) >> 4) & 0xff); 3206 if (shift < 0) 3207 shift += 0x100; 3208 3209 if (wn->agg[tid].nframes > (64 - shift)) 3210 return; 3211 3212 /* 3213 * Walk the bitmap and calculate how many successful and failed 3214 * attempts are made. 3215 * 3216 * Yes, the rate control code doesn't know these are A-MPDU 3217 * subframes and that it's okay to fail some of these. 3218 */ 3219 ni = tap->txa_ni; 3220 bitmap = (le64toh(ba->bitmap) >> shift) & wn->agg[tid].bitmap; 3221 for (i = 0; bitmap; i++) { 3222 if ((bitmap & 1) == 0) { 3223 tx_err ++; 3224 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 3225 IEEE80211_RATECTL_TX_FAILURE, &ackfailcnt, NULL); 3226 } else { 3227 tx_ok ++; 3228 ieee80211_ratectl_tx_complete(ni->ni_vap, ni, 3229 IEEE80211_RATECTL_TX_SUCCESS, &ackfailcnt, NULL); 3230 } 3231 bitmap >>= 1; 3232 } 3233 3234 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, 3235 "->%s: end; %d ok; %d err\n",__func__, tx_ok, tx_err); 3236 3237 } 3238 3239 /* 3240 * Process a CALIBRATION_RESULT notification sent by the initialization 3241 * firmware on response to a CMD_CALIB_CONFIG command (5000 only). 3242 */ 3243 static void 3244 iwn5000_rx_calib_results(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3245 struct iwn_rx_data *data) 3246 { 3247 struct iwn_phy_calib *calib = (struct iwn_phy_calib *)(desc + 1); 3248 int len, idx = -1; 3249 3250 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3251 3252 /* Runtime firmware should not send such a notification. */ 3253 if (sc->sc_flags & IWN_FLAG_CALIB_DONE){ 3254 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received after clib done\n", 3255 __func__); 3256 return; 3257 } 3258 len = (le32toh(desc->len) & 0x3fff) - 4; 3259 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3260 3261 switch (calib->code) { 3262 case IWN5000_PHY_CALIB_DC: 3263 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_DC) 3264 idx = 0; 3265 break; 3266 case IWN5000_PHY_CALIB_LO: 3267 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_LO) 3268 idx = 1; 3269 break; 3270 case IWN5000_PHY_CALIB_TX_IQ: 3271 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ) 3272 idx = 2; 3273 break; 3274 case IWN5000_PHY_CALIB_TX_IQ_PERIODIC: 3275 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TX_IQ_PERIODIC) 3276 idx = 3; 3277 break; 3278 case IWN5000_PHY_CALIB_BASE_BAND: 3279 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_BASE_BAND) 3280 idx = 4; 3281 break; 3282 } 3283 if (idx == -1) /* Ignore other results. */ 3284 return; 3285 3286 /* Save calibration result. */ 3287 if (sc->calibcmd[idx].buf != NULL) 3288 free(sc->calibcmd[idx].buf, M_DEVBUF); 3289 sc->calibcmd[idx].buf = malloc(len, M_DEVBUF, M_NOWAIT); 3290 if (sc->calibcmd[idx].buf == NULL) { 3291 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3292 "not enough memory for calibration result %d\n", 3293 calib->code); 3294 return; 3295 } 3296 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 3297 "saving calibration result idx=%d, code=%d len=%d\n", idx, calib->code, len); 3298 sc->calibcmd[idx].len = len; 3299 memcpy(sc->calibcmd[idx].buf, calib, len); 3300 } 3301 3302 static void 3303 iwn_stats_update(struct iwn_softc *sc, struct iwn_calib_state *calib, 3304 struct iwn_stats *stats, int len) 3305 { 3306 struct iwn_stats_bt *stats_bt; 3307 struct iwn_stats *lstats; 3308 3309 /* 3310 * First - check whether the length is the bluetooth or normal. 3311 * 3312 * If it's normal - just copy it and bump out. 3313 * Otherwise we have to convert things. 3314 */ 3315 3316 if (len == sizeof(struct iwn_stats) + 4) { 3317 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3318 sc->last_stat_valid = 1; 3319 return; 3320 } 3321 3322 /* 3323 * If it's not the bluetooth size - log, then just copy. 3324 */ 3325 if (len != sizeof(struct iwn_stats_bt) + 4) { 3326 DPRINTF(sc, IWN_DEBUG_STATS, 3327 "%s: size of rx statistics (%d) not an expected size!\n", 3328 __func__, 3329 len); 3330 memcpy(&sc->last_stat, stats, sizeof(struct iwn_stats)); 3331 sc->last_stat_valid = 1; 3332 return; 3333 } 3334 3335 /* 3336 * Ok. Time to copy. 3337 */ 3338 stats_bt = (struct iwn_stats_bt *) stats; 3339 lstats = &sc->last_stat; 3340 3341 /* flags */ 3342 lstats->flags = stats_bt->flags; 3343 /* rx_bt */ 3344 memcpy(&lstats->rx.ofdm, &stats_bt->rx_bt.ofdm, 3345 sizeof(struct iwn_rx_phy_stats)); 3346 memcpy(&lstats->rx.cck, &stats_bt->rx_bt.cck, 3347 sizeof(struct iwn_rx_phy_stats)); 3348 memcpy(&lstats->rx.general, &stats_bt->rx_bt.general_bt.common, 3349 sizeof(struct iwn_rx_general_stats)); 3350 memcpy(&lstats->rx.ht, &stats_bt->rx_bt.ht, 3351 sizeof(struct iwn_rx_ht_phy_stats)); 3352 /* tx */ 3353 memcpy(&lstats->tx, &stats_bt->tx, 3354 sizeof(struct iwn_tx_stats)); 3355 /* general */ 3356 memcpy(&lstats->general, &stats_bt->general, 3357 sizeof(struct iwn_general_stats)); 3358 3359 /* XXX TODO: Squirrel away the extra bluetooth stats somewhere */ 3360 sc->last_stat_valid = 1; 3361 } 3362 3363 /* 3364 * Process an RX_STATISTICS or BEACON_STATISTICS firmware notification. 3365 * The latter is sent by the firmware after each received beacon. 3366 */ 3367 static void 3368 iwn_rx_statistics(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3369 struct iwn_rx_data *data) 3370 { 3371 struct iwn_ops *ops = &sc->ops; 3372 struct ieee80211com *ic = &sc->sc_ic; 3373 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3374 struct iwn_calib_state *calib = &sc->calib; 3375 struct iwn_stats *stats = (struct iwn_stats *)(desc + 1); 3376 struct iwn_stats *lstats; 3377 int temp; 3378 3379 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3380 3381 /* Ignore statistics received during a scan. */ 3382 if (vap->iv_state != IEEE80211_S_RUN || 3383 (ic->ic_flags & IEEE80211_F_SCAN)){ 3384 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s received during calib\n", 3385 __func__); 3386 return; 3387 } 3388 3389 bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3390 3391 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_STATS, 3392 "%s: received statistics, cmd %d, len %d\n", 3393 __func__, desc->type, le16toh(desc->len)); 3394 sc->calib_cnt = 0; /* Reset TX power calibration timeout. */ 3395 3396 /* 3397 * Collect/track general statistics for reporting. 3398 * 3399 * This takes care of ensuring that the bluetooth sized message 3400 * will be correctly converted to the legacy sized message. 3401 */ 3402 iwn_stats_update(sc, calib, stats, le16toh(desc->len)); 3403 3404 /* 3405 * And now, let's take a reference of it to use! 3406 */ 3407 lstats = &sc->last_stat; 3408 3409 /* Test if temperature has changed. */ 3410 if (lstats->general.temp != sc->rawtemp) { 3411 /* Convert "raw" temperature to degC. */ 3412 sc->rawtemp = stats->general.temp; 3413 temp = ops->get_temperature(sc); 3414 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d\n", 3415 __func__, temp); 3416 3417 /* Update TX power if need be (4965AGN only). */ 3418 if (sc->hw_type == IWN_HW_REV_TYPE_4965) 3419 iwn4965_power_calibration(sc, temp); 3420 } 3421 3422 if (desc->type != IWN_BEACON_STATISTICS) 3423 return; /* Reply to a statistics request. */ 3424 3425 sc->noise = iwn_get_noise(&lstats->rx.general); 3426 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: noise %d\n", __func__, sc->noise); 3427 3428 /* Test that RSSI and noise are present in stats report. */ 3429 if (le32toh(lstats->rx.general.flags) != 1) { 3430 DPRINTF(sc, IWN_DEBUG_ANY, "%s\n", 3431 "received statistics without RSSI"); 3432 return; 3433 } 3434 3435 if (calib->state == IWN_CALIB_STATE_ASSOC) 3436 iwn_collect_noise(sc, &lstats->rx.general); 3437 else if (calib->state == IWN_CALIB_STATE_RUN) { 3438 iwn_tune_sensitivity(sc, &lstats->rx); 3439 /* 3440 * XXX TODO: Only run the RX recovery if we're associated! 3441 */ 3442 iwn_check_rx_recovery(sc, lstats); 3443 iwn_save_stats_counters(sc, lstats); 3444 } 3445 3446 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3447 } 3448 3449 /* 3450 * Save the relevant statistic counters for the next calibration 3451 * pass. 3452 */ 3453 static void 3454 iwn_save_stats_counters(struct iwn_softc *sc, const struct iwn_stats *rs) 3455 { 3456 struct iwn_calib_state *calib = &sc->calib; 3457 3458 /* Save counters values for next call. */ 3459 calib->bad_plcp_cck = le32toh(rs->rx.cck.bad_plcp); 3460 calib->fa_cck = le32toh(rs->rx.cck.fa); 3461 calib->bad_plcp_ht = le32toh(rs->rx.ht.bad_plcp); 3462 calib->bad_plcp_ofdm = le32toh(rs->rx.ofdm.bad_plcp); 3463 calib->fa_ofdm = le32toh(rs->rx.ofdm.fa); 3464 3465 /* Last time we received these tick values */ 3466 sc->last_calib_ticks = ticks; 3467 } 3468 3469 /* 3470 * Process a TX_DONE firmware notification. Unfortunately, the 4965AGN 3471 * and 5000 adapters have different incompatible TX status formats. 3472 */ 3473 static void 3474 iwn4965_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3475 struct iwn_rx_data *data) 3476 { 3477 struct iwn4965_tx_stat *stat = (struct iwn4965_tx_stat *)(desc + 1); 3478 struct iwn_tx_ring *ring; 3479 int qid; 3480 3481 qid = desc->qid & 0xf; 3482 ring = &sc->txq[qid]; 3483 3484 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3485 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3486 __func__, desc->qid, desc->idx, 3487 stat->rtsfailcnt, 3488 stat->ackfailcnt, 3489 stat->btkillcnt, 3490 stat->rate, le16toh(stat->duration), 3491 le32toh(stat->status)); 3492 3493 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3494 if (qid >= sc->firstaggqueue) { 3495 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes, 3496 stat->ackfailcnt, &stat->status); 3497 } else { 3498 iwn_tx_done(sc, desc, stat->ackfailcnt, 3499 le32toh(stat->status) & 0xff); 3500 } 3501 } 3502 3503 static void 3504 iwn5000_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, 3505 struct iwn_rx_data *data) 3506 { 3507 struct iwn5000_tx_stat *stat = (struct iwn5000_tx_stat *)(desc + 1); 3508 struct iwn_tx_ring *ring; 3509 int qid; 3510 3511 qid = desc->qid & 0xf; 3512 ring = &sc->txq[qid]; 3513 3514 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: " 3515 "qid %d idx %d RTS retries %d ACK retries %d nkill %d rate %x duration %d status %x\n", 3516 __func__, desc->qid, desc->idx, 3517 stat->rtsfailcnt, 3518 stat->ackfailcnt, 3519 stat->btkillcnt, 3520 stat->rate, le16toh(stat->duration), 3521 le32toh(stat->status)); 3522 3523 #ifdef notyet 3524 /* Reset TX scheduler slot. */ 3525 iwn5000_reset_sched(sc, desc->qid & 0xf, desc->idx); 3526 #endif 3527 3528 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); 3529 if (qid >= sc->firstaggqueue) { 3530 iwn_ampdu_tx_done(sc, qid, desc->idx, stat->nframes, 3531 stat->ackfailcnt, &stat->status); 3532 } else { 3533 iwn_tx_done(sc, desc, stat->ackfailcnt, 3534 le16toh(stat->status) & 0xff); 3535 } 3536 } 3537 3538 /* 3539 * Adapter-independent backend for TX_DONE firmware notifications. 3540 */ 3541 static void 3542 iwn_tx_done(struct iwn_softc *sc, struct iwn_rx_desc *desc, int ackfailcnt, 3543 uint8_t status) 3544 { 3545 struct iwn_tx_ring *ring = &sc->txq[desc->qid & 0xf]; 3546 struct iwn_tx_data *data = &ring->data[desc->idx]; 3547 struct mbuf *m; 3548 struct ieee80211_node *ni; 3549 struct ieee80211vap *vap; 3550 3551 KASSERT(data->ni != NULL, ("no node")); 3552 3553 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3554 3555 /* Unmap and free mbuf. */ 3556 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); 3557 bus_dmamap_unload(ring->data_dmat, data->map); 3558 m = data->m, data->m = NULL; 3559 ni = data->ni, data->ni = NULL; 3560 vap = ni->ni_vap; 3561 3562 /* 3563 * Update rate control statistics for the node. 3564 */ 3565 if (status & IWN_TX_FAIL) 3566 ieee80211_ratectl_tx_complete(vap, ni, 3567 IEEE80211_RATECTL_TX_FAILURE, &ackfailcnt, NULL); 3568 else 3569 ieee80211_ratectl_tx_complete(vap, ni, 3570 IEEE80211_RATECTL_TX_SUCCESS, &ackfailcnt, NULL); 3571 3572 /* 3573 * Channels marked for "radar" require traffic to be received 3574 * to unlock before we can transmit. Until traffic is seen 3575 * any attempt to transmit is returned immediately with status 3576 * set to IWN_TX_FAIL_TX_LOCKED. Unfortunately this can easily 3577 * happen on first authenticate after scanning. To workaround 3578 * this we ignore a failure of this sort in AUTH state so the 3579 * 802.11 layer will fall back to using a timeout to wait for 3580 * the AUTH reply. This allows the firmware time to see 3581 * traffic so a subsequent retry of AUTH succeeds. It's 3582 * unclear why the firmware does not maintain state for 3583 * channels recently visited as this would allow immediate 3584 * use of the channel after a scan (where we see traffic). 3585 */ 3586 if (status == IWN_TX_FAIL_TX_LOCKED && 3587 ni->ni_vap->iv_state == IEEE80211_S_AUTH) 3588 ieee80211_tx_complete(ni, m, 0); 3589 else 3590 ieee80211_tx_complete(ni, m, 3591 (status & IWN_TX_FAIL) != 0); 3592 3593 sc->sc_tx_timer = 0; 3594 if (--ring->queued < IWN_TX_RING_LOMARK) 3595 sc->qfullmsk &= ~(1 << ring->qid); 3596 3597 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3598 } 3599 3600 /* 3601 * Process a "command done" firmware notification. This is where we wakeup 3602 * processes waiting for a synchronous command completion. 3603 */ 3604 static void 3605 iwn_cmd_done(struct iwn_softc *sc, struct iwn_rx_desc *desc) 3606 { 3607 struct iwn_tx_ring *ring; 3608 struct iwn_tx_data *data; 3609 int cmd_queue_num; 3610 3611 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 3612 cmd_queue_num = IWN_PAN_CMD_QUEUE; 3613 else 3614 cmd_queue_num = IWN_CMD_QUEUE_NUM; 3615 3616 if ((desc->qid & IWN_RX_DESC_QID_MSK) != cmd_queue_num) 3617 return; /* Not a command ack. */ 3618 3619 ring = &sc->txq[cmd_queue_num]; 3620 data = &ring->data[desc->idx]; 3621 3622 /* If the command was mapped in an mbuf, free it. */ 3623 if (data->m != NULL) { 3624 bus_dmamap_sync(ring->data_dmat, data->map, 3625 BUS_DMASYNC_POSTWRITE); 3626 bus_dmamap_unload(ring->data_dmat, data->map); 3627 m_freem(data->m); 3628 data->m = NULL; 3629 } 3630 wakeup(&ring->desc[desc->idx]); 3631 } 3632 3633 static void 3634 iwn_ampdu_tx_done(struct iwn_softc *sc, int qid, int idx, int nframes, 3635 int ackfailcnt, void *stat) 3636 { 3637 struct iwn_ops *ops = &sc->ops; 3638 struct iwn_tx_ring *ring = &sc->txq[qid]; 3639 struct iwn_tx_data *data; 3640 struct mbuf *m; 3641 struct iwn_node *wn; 3642 struct ieee80211_node *ni; 3643 struct ieee80211_tx_ampdu *tap; 3644 uint64_t bitmap; 3645 uint32_t *status = stat; 3646 uint16_t *aggstatus = stat; 3647 uint16_t ssn; 3648 uint8_t tid; 3649 int bit, i, lastidx, *res, seqno, shift, start; 3650 3651 /* XXX TODO: status is le16 field! Grr */ 3652 3653 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 3654 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: nframes=%d, status=0x%08x\n", 3655 __func__, 3656 nframes, 3657 *status); 3658 3659 tap = sc->qid2tap[qid]; 3660 tid = tap->txa_tid; 3661 wn = (void *)tap->txa_ni; 3662 ni = tap->txa_ni; 3663 3664 /* 3665 * XXX TODO: ACK and RTS failures would be nice here! 3666 */ 3667 3668 /* 3669 * A-MPDU single frame status - if we failed to transmit it 3670 * in A-MPDU, then it may be a permanent failure. 3671 * 3672 * XXX TODO: check what the Linux iwlwifi driver does here; 3673 * there's some permanent and temporary failures that may be 3674 * handled differently. 3675 */ 3676 if (nframes == 1) { 3677 if ((*status & 0xff) != 1 && (*status & 0xff) != 2) { 3678 #ifdef NOT_YET 3679 printf("ieee80211_send_bar()\n"); 3680 #endif 3681 /* 3682 * If we completely fail a transmit, make sure a 3683 * notification is pushed up to the rate control 3684 * layer. 3685 */ 3686 ieee80211_ratectl_tx_complete(ni->ni_vap, 3687 ni, 3688 IEEE80211_RATECTL_TX_FAILURE, 3689 &ackfailcnt, 3690 NULL); 3691 } else { 3692 /* 3693 * If nframes=1, then we won't be getting a BA for 3694 * this frame. Ensure that we correctly update the 3695 * rate control code with how many retries were 3696 * needed to send it. 3697 */ 3698 ieee80211_ratectl_tx_complete(ni->ni_vap, 3699 ni, 3700 IEEE80211_RATECTL_TX_SUCCESS, 3701 &ackfailcnt, 3702 NULL); 3703 } 3704 } 3705 3706 bitmap = 0; 3707 start = idx; 3708 for (i = 0; i < nframes; i++) { 3709 if (le16toh(aggstatus[i * 2]) & 0xc) 3710 continue; 3711 3712 idx = le16toh(aggstatus[2*i + 1]) & 0xff; 3713 bit = idx - start; 3714 shift = 0; 3715 if (bit >= 64) { 3716 shift = 0x100 - idx + start; 3717 bit = 0; 3718 start = idx; 3719 } else if (bit <= -64) 3720 bit = 0x100 - start + idx; 3721 else if (bit < 0) { 3722 shift = start - idx; 3723 start = idx; 3724 bit = 0; 3725 } 3726 bitmap = bitmap << shift; 3727 bitmap |= 1ULL << bit; 3728 } 3729 tap = sc->qid2tap[qid]; 3730 tid = tap->txa_tid; 3731 wn = (void *)tap->txa_ni; 3732 wn->agg[tid].bitmap = bitmap; 3733 wn->agg[tid].startidx = start; 3734 wn->agg[tid].nframes = nframes; 3735 3736 res = NULL; 3737 ssn = 0; 3738 if (!IEEE80211_AMPDU_RUNNING(tap)) { 3739 res = tap->txa_private; 3740 ssn = tap->txa_start & 0xfff; 3741 } 3742 3743 /* This is going nframes DWORDS into the descriptor? */ 3744 seqno = le32toh(*(status + nframes)) & 0xfff; 3745 for (lastidx = (seqno & 0xff); ring->read != lastidx;) { 3746 data = &ring->data[ring->read]; 3747 3748 /* Unmap and free mbuf. */ 3749 bus_dmamap_sync(ring->data_dmat, data->map, 3750 BUS_DMASYNC_POSTWRITE); 3751 bus_dmamap_unload(ring->data_dmat, data->map); 3752 m = data->m, data->m = NULL; 3753 ni = data->ni, data->ni = NULL; 3754 3755 KASSERT(ni != NULL, ("no node")); 3756 KASSERT(m != NULL, ("no mbuf")); 3757 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: freeing m=%p\n", __func__, m); 3758 ieee80211_tx_complete(ni, m, 1); 3759 3760 ring->queued--; 3761 ring->read = (ring->read + 1) % IWN_TX_RING_COUNT; 3762 } 3763 3764 if (ring->queued == 0 && res != NULL) { 3765 iwn_nic_lock(sc); 3766 ops->ampdu_tx_stop(sc, qid, tid, ssn); 3767 iwn_nic_unlock(sc); 3768 sc->qid2tap[qid] = NULL; 3769 free(res, M_DEVBUF); 3770 return; 3771 } 3772 3773 sc->sc_tx_timer = 0; 3774 if (ring->queued < IWN_TX_RING_LOMARK) 3775 sc->qfullmsk &= ~(1 << ring->qid); 3776 3777 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 3778 } 3779 3780 /* 3781 * Process an INT_FH_RX or INT_SW_RX interrupt. 3782 */ 3783 static void 3784 iwn_notif_intr(struct iwn_softc *sc) 3785 { 3786 struct iwn_ops *ops = &sc->ops; 3787 struct ieee80211com *ic = &sc->sc_ic; 3788 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3789 uint16_t hw; 3790 3791 bus_dmamap_sync(sc->rxq.stat_dma.tag, sc->rxq.stat_dma.map, 3792 BUS_DMASYNC_POSTREAD); 3793 3794 hw = le16toh(sc->rxq.stat->closed_count) & 0xfff; 3795 while (sc->rxq.cur != hw) { 3796 struct iwn_rx_data *data = &sc->rxq.data[sc->rxq.cur]; 3797 struct iwn_rx_desc *desc; 3798 3799 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3800 BUS_DMASYNC_POSTREAD); 3801 desc = mtod(data->m, struct iwn_rx_desc *); 3802 3803 DPRINTF(sc, IWN_DEBUG_RECV, 3804 "%s: cur=%d; qid %x idx %d flags %x type %d(%s) len %d\n", 3805 __func__, sc->rxq.cur, desc->qid & 0xf, desc->idx, desc->flags, 3806 desc->type, iwn_intr_str(desc->type), 3807 le16toh(desc->len)); 3808 3809 if (!(desc->qid & IWN_UNSOLICITED_RX_NOTIF)) /* Reply to a command. */ 3810 iwn_cmd_done(sc, desc); 3811 3812 switch (desc->type) { 3813 case IWN_RX_PHY: 3814 iwn_rx_phy(sc, desc, data); 3815 break; 3816 3817 case IWN_RX_DONE: /* 4965AGN only. */ 3818 case IWN_MPDU_RX_DONE: 3819 /* An 802.11 frame has been received. */ 3820 iwn_rx_done(sc, desc, data); 3821 break; 3822 3823 case IWN_RX_COMPRESSED_BA: 3824 /* A Compressed BlockAck has been received. */ 3825 iwn_rx_compressed_ba(sc, desc, data); 3826 break; 3827 3828 case IWN_TX_DONE: 3829 /* An 802.11 frame has been transmitted. */ 3830 ops->tx_done(sc, desc, data); 3831 break; 3832 3833 case IWN_RX_STATISTICS: 3834 case IWN_BEACON_STATISTICS: 3835 iwn_rx_statistics(sc, desc, data); 3836 break; 3837 3838 case IWN_BEACON_MISSED: 3839 { 3840 struct iwn_beacon_missed *miss = 3841 (struct iwn_beacon_missed *)(desc + 1); 3842 int misses; 3843 3844 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3845 BUS_DMASYNC_POSTREAD); 3846 misses = le32toh(miss->consecutive); 3847 3848 DPRINTF(sc, IWN_DEBUG_STATE, 3849 "%s: beacons missed %d/%d\n", __func__, 3850 misses, le32toh(miss->total)); 3851 /* 3852 * If more than 5 consecutive beacons are missed, 3853 * reinitialize the sensitivity state machine. 3854 */ 3855 if (vap->iv_state == IEEE80211_S_RUN && 3856 (ic->ic_flags & IEEE80211_F_SCAN) == 0) { 3857 if (misses > 5) 3858 (void)iwn_init_sensitivity(sc); 3859 if (misses >= vap->iv_bmissthreshold) { 3860 IWN_UNLOCK(sc); 3861 ieee80211_beacon_miss(ic); 3862 IWN_LOCK(sc); 3863 } 3864 } 3865 break; 3866 } 3867 case IWN_UC_READY: 3868 { 3869 struct iwn_ucode_info *uc = 3870 (struct iwn_ucode_info *)(desc + 1); 3871 3872 /* The microcontroller is ready. */ 3873 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3874 BUS_DMASYNC_POSTREAD); 3875 DPRINTF(sc, IWN_DEBUG_RESET, 3876 "microcode alive notification version=%d.%d " 3877 "subtype=%x alive=%x\n", uc->major, uc->minor, 3878 uc->subtype, le32toh(uc->valid)); 3879 3880 if (le32toh(uc->valid) != 1) { 3881 device_printf(sc->sc_dev, 3882 "microcontroller initialization failed"); 3883 break; 3884 } 3885 if (uc->subtype == IWN_UCODE_INIT) { 3886 /* Save microcontroller report. */ 3887 memcpy(&sc->ucode_info, uc, sizeof (*uc)); 3888 } 3889 /* Save the address of the error log in SRAM. */ 3890 sc->errptr = le32toh(uc->errptr); 3891 break; 3892 } 3893 case IWN_STATE_CHANGED: 3894 { 3895 /* 3896 * State change allows hardware switch change to be 3897 * noted. However, we handle this in iwn_intr as we 3898 * get both the enable/disble intr. 3899 */ 3900 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3901 BUS_DMASYNC_POSTREAD); 3902 #ifdef IWN_DEBUG 3903 uint32_t *status = (uint32_t *)(desc + 1); 3904 DPRINTF(sc, IWN_DEBUG_INTR | IWN_DEBUG_STATE, 3905 "state changed to %x\n", 3906 le32toh(*status)); 3907 #endif 3908 break; 3909 } 3910 case IWN_START_SCAN: 3911 { 3912 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3913 BUS_DMASYNC_POSTREAD); 3914 #ifdef IWN_DEBUG 3915 struct iwn_start_scan *scan = 3916 (struct iwn_start_scan *)(desc + 1); 3917 DPRINTF(sc, IWN_DEBUG_ANY, 3918 "%s: scanning channel %d status %x\n", 3919 __func__, scan->chan, le32toh(scan->status)); 3920 #endif 3921 break; 3922 } 3923 case IWN_STOP_SCAN: 3924 { 3925 bus_dmamap_sync(sc->rxq.data_dmat, data->map, 3926 BUS_DMASYNC_POSTREAD); 3927 #ifdef IWN_DEBUG 3928 struct iwn_stop_scan *scan = 3929 (struct iwn_stop_scan *)(desc + 1); 3930 DPRINTF(sc, IWN_DEBUG_STATE | IWN_DEBUG_SCAN, 3931 "scan finished nchan=%d status=%d chan=%d\n", 3932 scan->nchan, scan->status, scan->chan); 3933 #endif 3934 sc->sc_is_scanning = 0; 3935 IWN_UNLOCK(sc); 3936 ieee80211_scan_next(vap); 3937 IWN_LOCK(sc); 3938 break; 3939 } 3940 case IWN5000_CALIBRATION_RESULT: 3941 iwn5000_rx_calib_results(sc, desc, data); 3942 break; 3943 3944 case IWN5000_CALIBRATION_DONE: 3945 sc->sc_flags |= IWN_FLAG_CALIB_DONE; 3946 wakeup(sc); 3947 break; 3948 } 3949 3950 sc->rxq.cur = (sc->rxq.cur + 1) % IWN_RX_RING_COUNT; 3951 } 3952 3953 /* Tell the firmware what we have processed. */ 3954 hw = (hw == 0) ? IWN_RX_RING_COUNT - 1 : hw - 1; 3955 IWN_WRITE(sc, IWN_FH_RX_WPTR, hw & ~7); 3956 } 3957 3958 /* 3959 * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up 3960 * from power-down sleep mode. 3961 */ 3962 static void 3963 iwn_wakeup_intr(struct iwn_softc *sc) 3964 { 3965 int qid; 3966 3967 DPRINTF(sc, IWN_DEBUG_RESET, "%s: ucode wakeup from power-down sleep\n", 3968 __func__); 3969 3970 /* Wakeup RX and TX rings. */ 3971 IWN_WRITE(sc, IWN_FH_RX_WPTR, sc->rxq.cur & ~7); 3972 for (qid = 0; qid < sc->ntxqs; qid++) { 3973 struct iwn_tx_ring *ring = &sc->txq[qid]; 3974 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | ring->cur); 3975 } 3976 } 3977 3978 static void 3979 iwn_rftoggle_intr(struct iwn_softc *sc) 3980 { 3981 struct ieee80211com *ic = &sc->sc_ic; 3982 uint32_t tmp = IWN_READ(sc, IWN_GP_CNTRL); 3983 3984 IWN_LOCK_ASSERT(sc); 3985 3986 device_printf(sc->sc_dev, "RF switch: radio %s\n", 3987 (tmp & IWN_GP_CNTRL_RFKILL) ? "enabled" : "disabled"); 3988 if (tmp & IWN_GP_CNTRL_RFKILL) 3989 ieee80211_runtask(ic, &sc->sc_radioon_task); 3990 else 3991 ieee80211_runtask(ic, &sc->sc_radiooff_task); 3992 } 3993 3994 /* 3995 * Dump the error log of the firmware when a firmware panic occurs. Although 3996 * we can't debug the firmware because it is neither open source nor free, it 3997 * can help us to identify certain classes of problems. 3998 */ 3999 static void 4000 iwn_fatal_intr(struct iwn_softc *sc) 4001 { 4002 struct iwn_fw_dump dump; 4003 int i; 4004 4005 IWN_LOCK_ASSERT(sc); 4006 4007 /* Force a complete recalibration on next init. */ 4008 sc->sc_flags &= ~IWN_FLAG_CALIB_DONE; 4009 4010 /* Check that the error log address is valid. */ 4011 if (sc->errptr < IWN_FW_DATA_BASE || 4012 sc->errptr + sizeof (dump) > 4013 IWN_FW_DATA_BASE + sc->fw_data_maxsz) { 4014 printf("%s: bad firmware error log address 0x%08x\n", __func__, 4015 sc->errptr); 4016 return; 4017 } 4018 if (iwn_nic_lock(sc) != 0) { 4019 printf("%s: could not read firmware error log\n", __func__); 4020 return; 4021 } 4022 /* Read firmware error log from SRAM. */ 4023 iwn_mem_read_region_4(sc, sc->errptr, (uint32_t *)&dump, 4024 sizeof (dump) / sizeof (uint32_t)); 4025 iwn_nic_unlock(sc); 4026 4027 if (dump.valid == 0) { 4028 printf("%s: firmware error log is empty\n", __func__); 4029 return; 4030 } 4031 printf("firmware error log:\n"); 4032 printf(" error type = \"%s\" (0x%08X)\n", 4033 (dump.id < nitems(iwn_fw_errmsg)) ? 4034 iwn_fw_errmsg[dump.id] : "UNKNOWN", 4035 dump.id); 4036 printf(" program counter = 0x%08X\n", dump.pc); 4037 printf(" source line = 0x%08X\n", dump.src_line); 4038 printf(" error data = 0x%08X%08X\n", 4039 dump.error_data[0], dump.error_data[1]); 4040 printf(" branch link = 0x%08X%08X\n", 4041 dump.branch_link[0], dump.branch_link[1]); 4042 printf(" interrupt link = 0x%08X%08X\n", 4043 dump.interrupt_link[0], dump.interrupt_link[1]); 4044 printf(" time = %u\n", dump.time[0]); 4045 4046 /* Dump driver status (TX and RX rings) while we're here. */ 4047 printf("driver status:\n"); 4048 for (i = 0; i < sc->ntxqs; i++) { 4049 struct iwn_tx_ring *ring = &sc->txq[i]; 4050 printf(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n", 4051 i, ring->qid, ring->cur, ring->queued); 4052 } 4053 printf(" rx ring: cur=%d\n", sc->rxq.cur); 4054 } 4055 4056 static void 4057 iwn_intr(void *arg) 4058 { 4059 struct iwn_softc *sc = arg; 4060 uint32_t r1, r2, tmp; 4061 4062 IWN_LOCK(sc); 4063 4064 /* Disable interrupts. */ 4065 IWN_WRITE(sc, IWN_INT_MASK, 0); 4066 4067 /* Read interrupts from ICT (fast) or from registers (slow). */ 4068 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4069 tmp = 0; 4070 while (sc->ict[sc->ict_cur] != 0) { 4071 tmp |= sc->ict[sc->ict_cur]; 4072 sc->ict[sc->ict_cur] = 0; /* Acknowledge. */ 4073 sc->ict_cur = (sc->ict_cur + 1) % IWN_ICT_COUNT; 4074 } 4075 tmp = le32toh(tmp); 4076 if (tmp == 0xffffffff) /* Shouldn't happen. */ 4077 tmp = 0; 4078 else if (tmp & 0xc0000) /* Workaround a HW bug. */ 4079 tmp |= 0x8000; 4080 r1 = (tmp & 0xff00) << 16 | (tmp & 0xff); 4081 r2 = 0; /* Unused. */ 4082 } else { 4083 r1 = IWN_READ(sc, IWN_INT); 4084 if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) { 4085 IWN_UNLOCK(sc); 4086 return; /* Hardware gone! */ 4087 } 4088 r2 = IWN_READ(sc, IWN_FH_INT); 4089 } 4090 4091 DPRINTF(sc, IWN_DEBUG_INTR, "interrupt reg1=0x%08x reg2=0x%08x\n" 4092 , r1, r2); 4093 4094 if (r1 == 0 && r2 == 0) 4095 goto done; /* Interrupt not for us. */ 4096 4097 /* Acknowledge interrupts. */ 4098 IWN_WRITE(sc, IWN_INT, r1); 4099 if (!(sc->sc_flags & IWN_FLAG_USE_ICT)) 4100 IWN_WRITE(sc, IWN_FH_INT, r2); 4101 4102 if (r1 & IWN_INT_RF_TOGGLED) { 4103 iwn_rftoggle_intr(sc); 4104 goto done; 4105 } 4106 if (r1 & IWN_INT_CT_REACHED) { 4107 device_printf(sc->sc_dev, "%s: critical temperature reached!\n", 4108 __func__); 4109 } 4110 if (r1 & (IWN_INT_SW_ERR | IWN_INT_HW_ERR)) { 4111 device_printf(sc->sc_dev, "%s: fatal firmware error\n", 4112 __func__); 4113 #ifdef IWN_DEBUG 4114 iwn_debug_register(sc); 4115 #endif 4116 /* Dump firmware error log and stop. */ 4117 iwn_fatal_intr(sc); 4118 4119 taskqueue_enqueue(sc->sc_tq, &sc->sc_panic_task); 4120 goto done; 4121 } 4122 if ((r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX | IWN_INT_RX_PERIODIC)) || 4123 (r2 & IWN_FH_INT_RX)) { 4124 if (sc->sc_flags & IWN_FLAG_USE_ICT) { 4125 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) 4126 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_RX); 4127 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4128 IWN_INT_PERIODIC_DIS); 4129 iwn_notif_intr(sc); 4130 if (r1 & (IWN_INT_FH_RX | IWN_INT_SW_RX)) { 4131 IWN_WRITE_1(sc, IWN_INT_PERIODIC, 4132 IWN_INT_PERIODIC_ENA); 4133 } 4134 } else 4135 iwn_notif_intr(sc); 4136 } 4137 4138 if ((r1 & IWN_INT_FH_TX) || (r2 & IWN_FH_INT_TX)) { 4139 if (sc->sc_flags & IWN_FLAG_USE_ICT) 4140 IWN_WRITE(sc, IWN_FH_INT, IWN_FH_INT_TX); 4141 wakeup(sc); /* FH DMA transfer completed. */ 4142 } 4143 4144 if (r1 & IWN_INT_ALIVE) 4145 wakeup(sc); /* Firmware is alive. */ 4146 4147 if (r1 & IWN_INT_WAKEUP) 4148 iwn_wakeup_intr(sc); 4149 4150 done: 4151 /* Re-enable interrupts. */ 4152 if (sc->sc_flags & IWN_FLAG_RUNNING) 4153 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 4154 4155 IWN_UNLOCK(sc); 4156 } 4157 4158 /* 4159 * Update TX scheduler ring when transmitting an 802.11 frame (4965AGN and 4160 * 5000 adapters use a slightly different format). 4161 */ 4162 static void 4163 iwn4965_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4164 uint16_t len) 4165 { 4166 uint16_t *w = &sc->sched[qid * IWN4965_SCHED_COUNT + idx]; 4167 4168 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4169 4170 *w = htole16(len + 8); 4171 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4172 BUS_DMASYNC_PREWRITE); 4173 if (idx < IWN_SCHED_WINSZ) { 4174 *(w + IWN_TX_RING_COUNT) = *w; 4175 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4176 BUS_DMASYNC_PREWRITE); 4177 } 4178 } 4179 4180 static void 4181 iwn5000_update_sched(struct iwn_softc *sc, int qid, int idx, uint8_t id, 4182 uint16_t len) 4183 { 4184 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4185 4186 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4187 4188 *w = htole16(id << 12 | (len + 8)); 4189 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4190 BUS_DMASYNC_PREWRITE); 4191 if (idx < IWN_SCHED_WINSZ) { 4192 *(w + IWN_TX_RING_COUNT) = *w; 4193 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4194 BUS_DMASYNC_PREWRITE); 4195 } 4196 } 4197 4198 #ifdef notyet 4199 static void 4200 iwn5000_reset_sched(struct iwn_softc *sc, int qid, int idx) 4201 { 4202 uint16_t *w = &sc->sched[qid * IWN5000_SCHED_COUNT + idx]; 4203 4204 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4205 4206 *w = (*w & htole16(0xf000)) | htole16(1); 4207 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4208 BUS_DMASYNC_PREWRITE); 4209 if (idx < IWN_SCHED_WINSZ) { 4210 *(w + IWN_TX_RING_COUNT) = *w; 4211 bus_dmamap_sync(sc->sched_dma.tag, sc->sched_dma.map, 4212 BUS_DMASYNC_PREWRITE); 4213 } 4214 } 4215 #endif 4216 4217 /* 4218 * Check whether OFDM 11g protection will be enabled for the given rate. 4219 * 4220 * The original driver code only enabled protection for OFDM rates. 4221 * It didn't check to see whether it was operating in 11a or 11bg mode. 4222 */ 4223 static int 4224 iwn_check_rate_needs_protection(struct iwn_softc *sc, 4225 struct ieee80211vap *vap, uint8_t rate) 4226 { 4227 struct ieee80211com *ic = vap->iv_ic; 4228 4229 /* 4230 * Not in 2GHz mode? Then there's no need to enable OFDM 4231 * 11bg protection. 4232 */ 4233 if (! IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) { 4234 return (0); 4235 } 4236 4237 /* 4238 * 11bg protection not enabled? Then don't use it. 4239 */ 4240 if ((ic->ic_flags & IEEE80211_F_USEPROT) == 0) 4241 return (0); 4242 4243 /* 4244 * If it's an 11n rate - no protection. 4245 * We'll do it via a specific 11n check. 4246 */ 4247 if (rate & IEEE80211_RATE_MCS) { 4248 return (0); 4249 } 4250 4251 /* 4252 * Do a rate table lookup. If the PHY is CCK, 4253 * don't do protection. 4254 */ 4255 if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_CCK) 4256 return (0); 4257 4258 /* 4259 * Yup, enable protection. 4260 */ 4261 return (1); 4262 } 4263 4264 /* 4265 * return a value between 0 and IWN_MAX_TX_RETRIES-1 as an index into 4266 * the link quality table that reflects this particular entry. 4267 */ 4268 static int 4269 iwn_tx_rate_to_linkq_offset(struct iwn_softc *sc, struct ieee80211_node *ni, 4270 uint8_t rate) 4271 { 4272 struct ieee80211_rateset *rs; 4273 int is_11n; 4274 int nr; 4275 int i; 4276 uint8_t cmp_rate; 4277 4278 /* 4279 * Figure out if we're using 11n or not here. 4280 */ 4281 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) 4282 is_11n = 1; 4283 else 4284 is_11n = 0; 4285 4286 /* 4287 * Use the correct rate table. 4288 */ 4289 if (is_11n) { 4290 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 4291 nr = ni->ni_htrates.rs_nrates; 4292 } else { 4293 rs = &ni->ni_rates; 4294 nr = rs->rs_nrates; 4295 } 4296 4297 /* 4298 * Find the relevant link quality entry in the table. 4299 */ 4300 for (i = 0; i < nr && i < IWN_MAX_TX_RETRIES - 1 ; i++) { 4301 /* 4302 * The link quality table index starts at 0 == highest 4303 * rate, so we walk the rate table backwards. 4304 */ 4305 cmp_rate = rs->rs_rates[(nr - 1) - i]; 4306 if (rate & IEEE80211_RATE_MCS) 4307 cmp_rate |= IEEE80211_RATE_MCS; 4308 4309 #if 0 4310 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: idx %d: nr=%d, rate=0x%02x, rateentry=0x%02x\n", 4311 __func__, 4312 i, 4313 nr, 4314 rate, 4315 cmp_rate); 4316 #endif 4317 4318 if (cmp_rate == rate) 4319 return (i); 4320 } 4321 4322 /* Failed? Start at the end */ 4323 return (IWN_MAX_TX_RETRIES - 1); 4324 } 4325 4326 static int 4327 iwn_tx_data(struct iwn_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 4328 { 4329 struct iwn_ops *ops = &sc->ops; 4330 const struct ieee80211_txparam *tp; 4331 struct ieee80211vap *vap = ni->ni_vap; 4332 struct ieee80211com *ic = ni->ni_ic; 4333 struct iwn_node *wn = (void *)ni; 4334 struct iwn_tx_ring *ring; 4335 struct iwn_tx_desc *desc; 4336 struct iwn_tx_data *data; 4337 struct iwn_tx_cmd *cmd; 4338 struct iwn_cmd_data *tx; 4339 struct ieee80211_frame *wh; 4340 struct ieee80211_key *k = NULL; 4341 struct mbuf *m1; 4342 uint32_t flags; 4343 uint16_t qos; 4344 u_int hdrlen; 4345 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER]; 4346 uint8_t tid, type; 4347 int ac, i, totlen, error, pad, nsegs = 0, rate; 4348 4349 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4350 4351 IWN_LOCK_ASSERT(sc); 4352 4353 wh = mtod(m, struct ieee80211_frame *); 4354 hdrlen = ieee80211_anyhdrsize(wh); 4355 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4356 4357 /* Select EDCA Access Category and TX ring for this frame. */ 4358 if (IEEE80211_QOS_HAS_SEQ(wh)) { 4359 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; 4360 tid = qos & IEEE80211_QOS_TID; 4361 } else { 4362 qos = 0; 4363 tid = 0; 4364 } 4365 ac = M_WME_GETAC(m); 4366 if (m->m_flags & M_AMPDU_MPDU) { 4367 uint16_t seqno; 4368 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[ac]; 4369 4370 if (!IEEE80211_AMPDU_RUNNING(tap)) { 4371 return EINVAL; 4372 } 4373 4374 /* 4375 * Queue this frame to the hardware ring that we've 4376 * negotiated AMPDU TX on. 4377 * 4378 * Note that the sequence number must match the TX slot 4379 * being used! 4380 */ 4381 ac = *(int *)tap->txa_private; 4382 seqno = ni->ni_txseqs[tid]; 4383 *(uint16_t *)wh->i_seq = 4384 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 4385 ring = &sc->txq[ac]; 4386 if ((seqno % 256) != ring->cur) { 4387 device_printf(sc->sc_dev, 4388 "%s: m=%p: seqno (%d) (%d) != ring index (%d) !\n", 4389 __func__, 4390 m, 4391 seqno, 4392 seqno % 256, 4393 ring->cur); 4394 } 4395 ni->ni_txseqs[tid]++; 4396 } 4397 ring = &sc->txq[ac]; 4398 desc = &ring->desc[ring->cur]; 4399 data = &ring->data[ring->cur]; 4400 4401 /* Choose a TX rate index. */ 4402 tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; 4403 if (type == IEEE80211_FC0_TYPE_MGT) 4404 rate = tp->mgmtrate; 4405 else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 4406 rate = tp->mcastrate; 4407 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 4408 rate = tp->ucastrate; 4409 else if (m->m_flags & M_EAPOL) 4410 rate = tp->mgmtrate; 4411 else { 4412 /* XXX pass pktlen */ 4413 (void) ieee80211_ratectl_rate(ni, NULL, 0); 4414 rate = ni->ni_txrate; 4415 } 4416 4417 /* Encrypt the frame if need be. */ 4418 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 4419 /* Retrieve key for TX. */ 4420 k = ieee80211_crypto_encap(ni, m); 4421 if (k == NULL) { 4422 return ENOBUFS; 4423 } 4424 /* 802.11 header may have moved. */ 4425 wh = mtod(m, struct ieee80211_frame *); 4426 } 4427 totlen = m->m_pkthdr.len; 4428 4429 if (ieee80211_radiotap_active_vap(vap)) { 4430 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4431 4432 tap->wt_flags = 0; 4433 tap->wt_rate = rate; 4434 if (k != NULL) 4435 tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; 4436 4437 ieee80211_radiotap_tx(vap, m); 4438 } 4439 4440 /* Prepare TX firmware command. */ 4441 cmd = &ring->cmd[ring->cur]; 4442 cmd->code = IWN_CMD_TX_DATA; 4443 cmd->flags = 0; 4444 cmd->qid = ring->qid; 4445 cmd->idx = ring->cur; 4446 4447 tx = (struct iwn_cmd_data *)cmd->data; 4448 /* NB: No need to clear tx, all fields are reinitialized here. */ 4449 tx->scratch = 0; /* clear "scratch" area */ 4450 4451 flags = 0; 4452 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4453 /* Unicast frame, check if an ACK is expected. */ 4454 if (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != 4455 IEEE80211_QOS_ACKPOLICY_NOACK) 4456 flags |= IWN_TX_NEED_ACK; 4457 } 4458 if ((wh->i_fc[0] & 4459 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 4460 (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR)) 4461 flags |= IWN_TX_IMM_BA; /* Cannot happen yet. */ 4462 4463 if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG) 4464 flags |= IWN_TX_MORE_FRAG; /* Cannot happen yet. */ 4465 4466 /* Check if frame must be protected using RTS/CTS or CTS-to-self. */ 4467 if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 4468 /* NB: Group frames are sent using CCK in 802.11b/g. */ 4469 if (totlen + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) { 4470 flags |= IWN_TX_NEED_RTS; 4471 } else if (iwn_check_rate_needs_protection(sc, vap, rate)) { 4472 if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 4473 flags |= IWN_TX_NEED_CTS; 4474 else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 4475 flags |= IWN_TX_NEED_RTS; 4476 } else if ((rate & IEEE80211_RATE_MCS) && 4477 (ic->ic_htprotmode == IEEE80211_PROT_RTSCTS)) { 4478 flags |= IWN_TX_NEED_RTS; 4479 } 4480 4481 /* XXX HT protection? */ 4482 4483 if (flags & (IWN_TX_NEED_RTS | IWN_TX_NEED_CTS)) { 4484 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4485 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4486 flags &= ~(IWN_TX_NEED_RTS | IWN_TX_NEED_CTS); 4487 flags |= IWN_TX_NEED_PROTECTION; 4488 } else 4489 flags |= IWN_TX_FULL_TXOP; 4490 } 4491 } 4492 4493 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 4494 type != IEEE80211_FC0_TYPE_DATA) 4495 tx->id = sc->broadcast_id; 4496 else 4497 tx->id = wn->id; 4498 4499 if (type == IEEE80211_FC0_TYPE_MGT) { 4500 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4501 4502 /* Tell HW to set timestamp in probe responses. */ 4503 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4504 flags |= IWN_TX_INSERT_TSTAMP; 4505 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4506 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4507 tx->timeout = htole16(3); 4508 else 4509 tx->timeout = htole16(2); 4510 } else 4511 tx->timeout = htole16(0); 4512 4513 if (hdrlen & 3) { 4514 /* First segment length must be a multiple of 4. */ 4515 flags |= IWN_TX_NEED_PADDING; 4516 pad = 4 - (hdrlen & 3); 4517 } else 4518 pad = 0; 4519 4520 tx->len = htole16(totlen); 4521 tx->tid = tid; 4522 tx->rts_ntries = 60; 4523 tx->data_ntries = 15; 4524 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4525 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4526 if (tx->id == sc->broadcast_id) { 4527 /* Group or management frame. */ 4528 tx->linkq = 0; 4529 } else { 4530 tx->linkq = iwn_tx_rate_to_linkq_offset(sc, ni, rate); 4531 flags |= IWN_TX_LINKQ; /* enable MRR */ 4532 } 4533 4534 /* Set physical address of "scratch area". */ 4535 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 4536 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 4537 4538 /* Copy 802.11 header in TX command. */ 4539 memcpy((uint8_t *)(tx + 1), wh, hdrlen); 4540 4541 /* Trim 802.11 header. */ 4542 m_adj(m, hdrlen); 4543 tx->security = 0; 4544 tx->flags = htole32(flags); 4545 4546 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs, 4547 &nsegs, BUS_DMA_NOWAIT); 4548 if (error != 0) { 4549 if (error != EFBIG) { 4550 device_printf(sc->sc_dev, 4551 "%s: can't map mbuf (error %d)\n", __func__, error); 4552 return error; 4553 } 4554 /* Too many DMA segments, linearize mbuf. */ 4555 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER - 1); 4556 if (m1 == NULL) { 4557 device_printf(sc->sc_dev, 4558 "%s: could not defrag mbuf\n", __func__); 4559 return ENOBUFS; 4560 } 4561 m = m1; 4562 4563 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, 4564 segs, &nsegs, BUS_DMA_NOWAIT); 4565 if (error != 0) { 4566 device_printf(sc->sc_dev, 4567 "%s: can't map mbuf (error %d)\n", __func__, error); 4568 return error; 4569 } 4570 } 4571 4572 data->m = m; 4573 data->ni = ni; 4574 4575 DPRINTF(sc, IWN_DEBUG_XMIT, 4576 "%s: qid %d idx %d len %d nsegs %d flags 0x%08x rate 0x%04x plcp 0x%08x\n", 4577 __func__, 4578 ring->qid, 4579 ring->cur, 4580 m->m_pkthdr.len, 4581 nsegs, 4582 flags, 4583 rate, 4584 tx->rate); 4585 4586 /* Fill TX descriptor. */ 4587 desc->nsegs = 1; 4588 if (m->m_len != 0) 4589 desc->nsegs += nsegs; 4590 /* First DMA segment is used by the TX command. */ 4591 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 4592 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 4593 (4 + sizeof (*tx) + hdrlen + pad) << 4); 4594 /* Other DMA segments are for data payload. */ 4595 seg = &segs[0]; 4596 for (i = 1; i <= nsegs; i++) { 4597 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 4598 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 4599 seg->ds_len << 4); 4600 seg++; 4601 } 4602 4603 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 4604 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 4605 BUS_DMASYNC_PREWRITE); 4606 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 4607 BUS_DMASYNC_PREWRITE); 4608 4609 /* Update TX scheduler. */ 4610 if (ring->qid >= sc->firstaggqueue) 4611 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 4612 4613 /* Kick TX ring. */ 4614 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 4615 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 4616 4617 /* Mark TX ring as full if we reach a certain threshold. */ 4618 if (++ring->queued > IWN_TX_RING_HIMARK) 4619 sc->qfullmsk |= 1 << ring->qid; 4620 4621 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 4622 4623 return 0; 4624 } 4625 4626 static int 4627 iwn_tx_data_raw(struct iwn_softc *sc, struct mbuf *m, 4628 struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) 4629 { 4630 struct iwn_ops *ops = &sc->ops; 4631 struct ieee80211vap *vap = ni->ni_vap; 4632 struct iwn_tx_cmd *cmd; 4633 struct iwn_cmd_data *tx; 4634 struct ieee80211_frame *wh; 4635 struct iwn_tx_ring *ring; 4636 struct iwn_tx_desc *desc; 4637 struct iwn_tx_data *data; 4638 struct mbuf *m1; 4639 bus_dma_segment_t *seg, segs[IWN_MAX_SCATTER]; 4640 uint32_t flags; 4641 u_int hdrlen; 4642 int ac, totlen, error, pad, nsegs = 0, i, rate; 4643 uint8_t type; 4644 4645 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4646 4647 IWN_LOCK_ASSERT(sc); 4648 4649 wh = mtod(m, struct ieee80211_frame *); 4650 hdrlen = ieee80211_anyhdrsize(wh); 4651 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 4652 4653 ac = params->ibp_pri & 3; 4654 4655 ring = &sc->txq[ac]; 4656 desc = &ring->desc[ring->cur]; 4657 data = &ring->data[ring->cur]; 4658 4659 /* Choose a TX rate. */ 4660 rate = params->ibp_rate0; 4661 totlen = m->m_pkthdr.len; 4662 4663 /* Prepare TX firmware command. */ 4664 cmd = &ring->cmd[ring->cur]; 4665 cmd->code = IWN_CMD_TX_DATA; 4666 cmd->flags = 0; 4667 cmd->qid = ring->qid; 4668 cmd->idx = ring->cur; 4669 4670 tx = (struct iwn_cmd_data *)cmd->data; 4671 /* NB: No need to clear tx, all fields are reinitialized here. */ 4672 tx->scratch = 0; /* clear "scratch" area */ 4673 4674 flags = 0; 4675 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 4676 flags |= IWN_TX_NEED_ACK; 4677 if (params->ibp_flags & IEEE80211_BPF_RTS) { 4678 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4679 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4680 flags &= ~IWN_TX_NEED_RTS; 4681 flags |= IWN_TX_NEED_PROTECTION; 4682 } else 4683 flags |= IWN_TX_NEED_RTS | IWN_TX_FULL_TXOP; 4684 } 4685 if (params->ibp_flags & IEEE80211_BPF_CTS) { 4686 if (sc->hw_type != IWN_HW_REV_TYPE_4965) { 4687 /* 5000 autoselects RTS/CTS or CTS-to-self. */ 4688 flags &= ~IWN_TX_NEED_CTS; 4689 flags |= IWN_TX_NEED_PROTECTION; 4690 } else 4691 flags |= IWN_TX_NEED_CTS | IWN_TX_FULL_TXOP; 4692 } 4693 if (type == IEEE80211_FC0_TYPE_MGT) { 4694 uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 4695 4696 /* Tell HW to set timestamp in probe responses. */ 4697 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) 4698 flags |= IWN_TX_INSERT_TSTAMP; 4699 4700 if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || 4701 subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) 4702 tx->timeout = htole16(3); 4703 else 4704 tx->timeout = htole16(2); 4705 } else 4706 tx->timeout = htole16(0); 4707 4708 if (hdrlen & 3) { 4709 /* First segment length must be a multiple of 4. */ 4710 flags |= IWN_TX_NEED_PADDING; 4711 pad = 4 - (hdrlen & 3); 4712 } else 4713 pad = 0; 4714 4715 if (ieee80211_radiotap_active_vap(vap)) { 4716 struct iwn_tx_radiotap_header *tap = &sc->sc_txtap; 4717 4718 tap->wt_flags = 0; 4719 tap->wt_rate = rate; 4720 4721 ieee80211_radiotap_tx(vap, m); 4722 } 4723 4724 tx->len = htole16(totlen); 4725 tx->tid = 0; 4726 tx->id = sc->broadcast_id; 4727 tx->rts_ntries = params->ibp_try1; 4728 tx->data_ntries = params->ibp_try0; 4729 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 4730 tx->rate = iwn_rate_to_plcp(sc, ni, rate); 4731 4732 /* Group or management frame. */ 4733 tx->linkq = 0; 4734 4735 /* Set physical address of "scratch area". */ 4736 tx->loaddr = htole32(IWN_LOADDR(data->scratch_paddr)); 4737 tx->hiaddr = IWN_HIADDR(data->scratch_paddr); 4738 4739 /* Copy 802.11 header in TX command. */ 4740 memcpy((uint8_t *)(tx + 1), wh, hdrlen); 4741 4742 /* Trim 802.11 header. */ 4743 m_adj(m, hdrlen); 4744 tx->security = 0; 4745 tx->flags = htole32(flags); 4746 4747 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, segs, 4748 &nsegs, BUS_DMA_NOWAIT); 4749 if (error != 0) { 4750 if (error != EFBIG) { 4751 device_printf(sc->sc_dev, 4752 "%s: can't map mbuf (error %d)\n", __func__, error); 4753 return error; 4754 } 4755 /* Too many DMA segments, linearize mbuf. */ 4756 m1 = m_collapse(m, M_NOWAIT, IWN_MAX_SCATTER - 1); 4757 if (m1 == NULL) { 4758 device_printf(sc->sc_dev, 4759 "%s: could not defrag mbuf\n", __func__); 4760 return ENOBUFS; 4761 } 4762 m = m1; 4763 4764 error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, m, 4765 segs, &nsegs, BUS_DMA_NOWAIT); 4766 if (error != 0) { 4767 device_printf(sc->sc_dev, 4768 "%s: can't map mbuf (error %d)\n", __func__, error); 4769 return error; 4770 } 4771 } 4772 4773 data->m = m; 4774 data->ni = ni; 4775 4776 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: qid %d idx %d len %d nsegs %d\n", 4777 __func__, ring->qid, ring->cur, m->m_pkthdr.len, nsegs); 4778 4779 /* Fill TX descriptor. */ 4780 desc->nsegs = 1; 4781 if (m->m_len != 0) 4782 desc->nsegs += nsegs; 4783 /* First DMA segment is used by the TX command. */ 4784 desc->segs[0].addr = htole32(IWN_LOADDR(data->cmd_paddr)); 4785 desc->segs[0].len = htole16(IWN_HIADDR(data->cmd_paddr) | 4786 (4 + sizeof (*tx) + hdrlen + pad) << 4); 4787 /* Other DMA segments are for data payload. */ 4788 seg = &segs[0]; 4789 for (i = 1; i <= nsegs; i++) { 4790 desc->segs[i].addr = htole32(IWN_LOADDR(seg->ds_addr)); 4791 desc->segs[i].len = htole16(IWN_HIADDR(seg->ds_addr) | 4792 seg->ds_len << 4); 4793 seg++; 4794 } 4795 4796 bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); 4797 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 4798 BUS_DMASYNC_PREWRITE); 4799 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 4800 BUS_DMASYNC_PREWRITE); 4801 4802 /* Update TX scheduler. */ 4803 if (ring->qid >= sc->firstaggqueue) 4804 ops->update_sched(sc, ring->qid, ring->cur, tx->id, totlen); 4805 4806 /* Kick TX ring. */ 4807 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 4808 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 4809 4810 /* Mark TX ring as full if we reach a certain threshold. */ 4811 if (++ring->queued > IWN_TX_RING_HIMARK) 4812 sc->qfullmsk |= 1 << ring->qid; 4813 4814 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 4815 4816 return 0; 4817 } 4818 4819 static void 4820 iwn_xmit_task(void *arg0, int pending) 4821 { 4822 struct iwn_softc *sc = arg0; 4823 struct ieee80211_node *ni; 4824 struct mbuf *m; 4825 int error; 4826 struct ieee80211_bpf_params p; 4827 int have_p; 4828 4829 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: called\n", __func__); 4830 4831 IWN_LOCK(sc); 4832 /* 4833 * Dequeue frames, attempt to transmit, 4834 * then disable beaconwait when we're done. 4835 */ 4836 while ((m = mbufq_dequeue(&sc->sc_xmit_queue)) != NULL) { 4837 have_p = 0; 4838 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 4839 4840 /* Get xmit params if appropriate */ 4841 if (ieee80211_get_xmit_params(m, &p) == 0) 4842 have_p = 1; 4843 4844 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: m=%p, have_p=%d\n", 4845 __func__, m, have_p); 4846 4847 /* If we have xmit params, use them */ 4848 if (have_p) 4849 error = iwn_tx_data_raw(sc, m, ni, &p); 4850 else 4851 error = iwn_tx_data(sc, m, ni); 4852 4853 if (error != 0) { 4854 if_inc_counter(ni->ni_vap->iv_ifp, 4855 IFCOUNTER_OERRORS, 1); 4856 ieee80211_free_node(ni); 4857 } 4858 } 4859 4860 sc->sc_beacon_wait = 0; 4861 IWN_UNLOCK(sc); 4862 } 4863 4864 /* 4865 * raw frame xmit - free node/reference if failed. 4866 */ 4867 static int 4868 iwn_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 4869 const struct ieee80211_bpf_params *params) 4870 { 4871 struct ieee80211com *ic = ni->ni_ic; 4872 struct iwn_softc *sc = ic->ic_softc; 4873 int error = 0; 4874 4875 DPRINTF(sc, IWN_DEBUG_XMIT | IWN_DEBUG_TRACE, "->%s begin\n", __func__); 4876 4877 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0) { 4878 ieee80211_free_node(ni); 4879 m_freem(m); 4880 return ENETDOWN; 4881 } 4882 4883 /* XXX? net80211 doesn't set this on xmit'ed raw frames? */ 4884 m->m_pkthdr.rcvif = (void *) ni; 4885 4886 IWN_LOCK(sc); 4887 4888 /* queue frame if we have to */ 4889 if (sc->sc_beacon_wait) { 4890 if (iwn_xmit_queue_enqueue(sc, m) != 0) { 4891 m_freem(m); 4892 if_inc_counter(ni->ni_vap->iv_ifp, 4893 IFCOUNTER_OERRORS, 1); 4894 ieee80211_free_node(ni); 4895 IWN_UNLOCK(sc); 4896 return (ENOBUFS); 4897 } 4898 /* Queued, so just return OK */ 4899 IWN_UNLOCK(sc); 4900 return (0); 4901 } 4902 4903 if (params == NULL) { 4904 /* 4905 * Legacy path; interpret frame contents to decide 4906 * precisely how to send the frame. 4907 */ 4908 error = iwn_tx_data(sc, m, ni); 4909 } else { 4910 /* 4911 * Caller supplied explicit parameters to use in 4912 * sending the frame. 4913 */ 4914 error = iwn_tx_data_raw(sc, m, ni, params); 4915 } 4916 if (error != 0) { 4917 /* NB: m is reclaimed on tx failure */ 4918 ieee80211_free_node(ni); 4919 } else 4920 sc->sc_tx_timer = 5; 4921 4922 IWN_UNLOCK(sc); 4923 4924 DPRINTF(sc, IWN_DEBUG_TRACE | IWN_DEBUG_XMIT, "->%s: end\n",__func__); 4925 4926 return error; 4927 } 4928 4929 /* 4930 * transmit - don't free mbuf if failed; don't free node ref if failed. 4931 */ 4932 static int 4933 iwn_transmit(struct ieee80211com *ic, struct mbuf *m) 4934 { 4935 struct iwn_softc *sc = ic->ic_softc; 4936 struct ieee80211_node *ni; 4937 int error; 4938 4939 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 4940 4941 IWN_LOCK(sc); 4942 if ((sc->sc_flags & IWN_FLAG_RUNNING) == 0 || sc->sc_beacon_wait) { 4943 IWN_UNLOCK(sc); 4944 return (ENXIO); 4945 } 4946 4947 if (sc->qfullmsk) { 4948 IWN_UNLOCK(sc); 4949 return (ENOBUFS); 4950 } 4951 4952 error = iwn_tx_data(sc, m, ni); 4953 if (error) { 4954 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 4955 } else 4956 sc->sc_tx_timer = 5; 4957 IWN_UNLOCK(sc); 4958 return (error); 4959 } 4960 4961 static void 4962 iwn_watchdog(void *arg) 4963 { 4964 struct iwn_softc *sc = arg; 4965 struct ieee80211com *ic = &sc->sc_ic; 4966 4967 IWN_LOCK_ASSERT(sc); 4968 4969 KASSERT(sc->sc_flags & IWN_FLAG_RUNNING, ("not running")); 4970 4971 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 4972 4973 if (sc->sc_tx_timer > 0) { 4974 if (--sc->sc_tx_timer == 0) { 4975 ic_printf(ic, "device timeout\n"); 4976 ieee80211_runtask(ic, &sc->sc_reinit_task); 4977 return; 4978 } 4979 } 4980 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 4981 } 4982 4983 static int 4984 iwn_cdev_open(struct cdev *dev, int flags, int type, struct thread *td) 4985 { 4986 4987 return (0); 4988 } 4989 4990 static int 4991 iwn_cdev_close(struct cdev *dev, int flags, int type, struct thread *td) 4992 { 4993 4994 return (0); 4995 } 4996 4997 static int 4998 iwn_cdev_ioctl(struct cdev *dev, unsigned long cmd, caddr_t data, int fflag, 4999 struct thread *td) 5000 { 5001 int rc; 5002 struct iwn_softc *sc = dev->si_drv1; 5003 struct iwn_ioctl_data *d; 5004 5005 rc = priv_check(td, PRIV_DRIVER); 5006 if (rc != 0) 5007 return (0); 5008 5009 switch (cmd) { 5010 case SIOCGIWNSTATS: 5011 d = (struct iwn_ioctl_data *) data; 5012 IWN_LOCK(sc); 5013 /* XXX validate permissions/memory/etc? */ 5014 rc = copyout(&sc->last_stat, d->dst_addr, sizeof(struct iwn_stats)); 5015 IWN_UNLOCK(sc); 5016 break; 5017 case SIOCZIWNSTATS: 5018 IWN_LOCK(sc); 5019 memset(&sc->last_stat, 0, sizeof(struct iwn_stats)); 5020 IWN_UNLOCK(sc); 5021 break; 5022 default: 5023 rc = EINVAL; 5024 break; 5025 } 5026 return (rc); 5027 } 5028 5029 static int 5030 iwn_ioctl(struct ieee80211com *ic, u_long cmd, void *data) 5031 { 5032 5033 return (ENOTTY); 5034 } 5035 5036 static void 5037 iwn_parent(struct ieee80211com *ic) 5038 { 5039 struct iwn_softc *sc = ic->ic_softc; 5040 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 5041 int startall = 0, stop = 0; 5042 5043 IWN_LOCK(sc); 5044 if (ic->ic_nrunning > 0) { 5045 if (!(sc->sc_flags & IWN_FLAG_RUNNING)) { 5046 iwn_init_locked(sc); 5047 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL) 5048 startall = 1; 5049 else 5050 stop = 1; 5051 } 5052 } else if (sc->sc_flags & IWN_FLAG_RUNNING) 5053 iwn_stop_locked(sc); 5054 IWN_UNLOCK(sc); 5055 if (startall) 5056 ieee80211_start_all(ic); 5057 else if (vap != NULL && stop) 5058 ieee80211_stop(vap); 5059 } 5060 5061 /* 5062 * Send a command to the firmware. 5063 */ 5064 static int 5065 iwn_cmd(struct iwn_softc *sc, int code, const void *buf, int size, int async) 5066 { 5067 struct iwn_tx_ring *ring; 5068 struct iwn_tx_desc *desc; 5069 struct iwn_tx_data *data; 5070 struct iwn_tx_cmd *cmd; 5071 struct mbuf *m; 5072 bus_addr_t paddr; 5073 int totlen, error; 5074 int cmd_queue_num; 5075 5076 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5077 5078 if (async == 0) 5079 IWN_LOCK_ASSERT(sc); 5080 5081 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 5082 cmd_queue_num = IWN_PAN_CMD_QUEUE; 5083 else 5084 cmd_queue_num = IWN_CMD_QUEUE_NUM; 5085 5086 ring = &sc->txq[cmd_queue_num]; 5087 desc = &ring->desc[ring->cur]; 5088 data = &ring->data[ring->cur]; 5089 totlen = 4 + size; 5090 5091 if (size > sizeof cmd->data) { 5092 /* Command is too large to fit in a descriptor. */ 5093 if (totlen > MCLBYTES) 5094 return EINVAL; 5095 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); 5096 if (m == NULL) 5097 return ENOMEM; 5098 cmd = mtod(m, struct iwn_tx_cmd *); 5099 error = bus_dmamap_load(ring->data_dmat, data->map, cmd, 5100 totlen, iwn_dma_map_addr, &paddr, BUS_DMA_NOWAIT); 5101 if (error != 0) { 5102 m_freem(m); 5103 return error; 5104 } 5105 data->m = m; 5106 } else { 5107 cmd = &ring->cmd[ring->cur]; 5108 paddr = data->cmd_paddr; 5109 } 5110 5111 cmd->code = code; 5112 cmd->flags = 0; 5113 cmd->qid = ring->qid; 5114 cmd->idx = ring->cur; 5115 memcpy(cmd->data, buf, size); 5116 5117 desc->nsegs = 1; 5118 desc->segs[0].addr = htole32(IWN_LOADDR(paddr)); 5119 desc->segs[0].len = htole16(IWN_HIADDR(paddr) | totlen << 4); 5120 5121 DPRINTF(sc, IWN_DEBUG_CMD, "%s: %s (0x%x) flags %d qid %d idx %d\n", 5122 __func__, iwn_intr_str(cmd->code), cmd->code, 5123 cmd->flags, cmd->qid, cmd->idx); 5124 5125 if (size > sizeof cmd->data) { 5126 bus_dmamap_sync(ring->data_dmat, data->map, 5127 BUS_DMASYNC_PREWRITE); 5128 } else { 5129 bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, 5130 BUS_DMASYNC_PREWRITE); 5131 } 5132 bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, 5133 BUS_DMASYNC_PREWRITE); 5134 5135 /* Kick command ring. */ 5136 ring->cur = (ring->cur + 1) % IWN_TX_RING_COUNT; 5137 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); 5138 5139 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5140 5141 return async ? 0 : msleep(desc, &sc->sc_mtx, PCATCH, "iwncmd", hz); 5142 } 5143 5144 static int 5145 iwn4965_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5146 { 5147 struct iwn4965_node_info hnode; 5148 caddr_t src, dst; 5149 5150 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5151 5152 /* 5153 * We use the node structure for 5000 Series internally (it is 5154 * a superset of the one for 4965AGN). We thus copy the common 5155 * fields before sending the command. 5156 */ 5157 src = (caddr_t)node; 5158 dst = (caddr_t)&hnode; 5159 memcpy(dst, src, 48); 5160 /* Skip TSC, RX MIC and TX MIC fields from ``src''. */ 5161 memcpy(dst + 48, src + 72, 20); 5162 return iwn_cmd(sc, IWN_CMD_ADD_NODE, &hnode, sizeof hnode, async); 5163 } 5164 5165 static int 5166 iwn5000_add_node(struct iwn_softc *sc, struct iwn_node_info *node, int async) 5167 { 5168 5169 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5170 5171 /* Direct mapping. */ 5172 return iwn_cmd(sc, IWN_CMD_ADD_NODE, node, sizeof (*node), async); 5173 } 5174 5175 static int 5176 iwn_set_link_quality(struct iwn_softc *sc, struct ieee80211_node *ni) 5177 { 5178 struct iwn_node *wn = (void *)ni; 5179 struct ieee80211_rateset *rs; 5180 struct iwn_cmd_link_quality linkq; 5181 int i, rate, txrate; 5182 int is_11n; 5183 5184 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5185 5186 memset(&linkq, 0, sizeof linkq); 5187 linkq.id = wn->id; 5188 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5189 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5190 5191 linkq.ampdu_max = 32; /* XXX negotiated? */ 5192 linkq.ampdu_threshold = 3; 5193 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5194 5195 DPRINTF(sc, IWN_DEBUG_XMIT, 5196 "%s: 1stream antenna=0x%02x, 2stream antenna=0x%02x, ntxstreams=%d\n", 5197 __func__, 5198 linkq.antmsk_1stream, 5199 linkq.antmsk_2stream, 5200 sc->ntxchains); 5201 5202 /* 5203 * Are we using 11n rates? Ensure the channel is 5204 * 11n _and_ we have some 11n rates, or don't 5205 * try. 5206 */ 5207 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_htrates.rs_nrates > 0) { 5208 rs = (struct ieee80211_rateset *) &ni->ni_htrates; 5209 is_11n = 1; 5210 } else { 5211 rs = &ni->ni_rates; 5212 is_11n = 0; 5213 } 5214 5215 /* Start at highest available bit-rate. */ 5216 /* 5217 * XXX this is all very dirty! 5218 */ 5219 if (is_11n) 5220 txrate = ni->ni_htrates.rs_nrates - 1; 5221 else 5222 txrate = rs->rs_nrates - 1; 5223 for (i = 0; i < IWN_MAX_TX_RETRIES; i++) { 5224 uint32_t plcp; 5225 5226 /* 5227 * XXX TODO: ensure the last two slots are the two lowest 5228 * rate entries, just for now. 5229 */ 5230 if (i == 14 || i == 15) 5231 txrate = 0; 5232 5233 if (is_11n) 5234 rate = IEEE80211_RATE_MCS | rs->rs_rates[txrate]; 5235 else 5236 rate = IEEE80211_RV(rs->rs_rates[txrate]); 5237 5238 /* Do rate -> PLCP config mapping */ 5239 plcp = iwn_rate_to_plcp(sc, ni, rate); 5240 linkq.retry[i] = plcp; 5241 DPRINTF(sc, IWN_DEBUG_XMIT, 5242 "%s: i=%d, txrate=%d, rate=0x%02x, plcp=0x%08x\n", 5243 __func__, 5244 i, 5245 txrate, 5246 rate, 5247 le32toh(plcp)); 5248 5249 /* 5250 * The mimo field is an index into the table which 5251 * indicates the first index where it and subsequent entries 5252 * will not be using MIMO. 5253 * 5254 * Since we're filling linkq from 0..15 and we're filling 5255 * from the higest MCS rates to the lowest rates, if we 5256 * _are_ doing a dual-stream rate, set mimo to idx+1 (ie, 5257 * the next entry.) That way if the next entry is a non-MIMO 5258 * entry, we're already pointing at it. 5259 */ 5260 if ((le32toh(plcp) & IWN_RFLAG_MCS) && 5261 IEEE80211_RV(le32toh(plcp)) > 7) 5262 linkq.mimo = i + 1; 5263 5264 /* Next retry at immediate lower bit-rate. */ 5265 if (txrate > 0) 5266 txrate--; 5267 } 5268 /* 5269 * If we reached the end of the list and indeed we hit 5270 * all MIMO rates (eg 5300 doing MCS23-15) then yes, 5271 * set mimo to 15. Setting it to 16 panics the firmware. 5272 */ 5273 if (linkq.mimo > 15) 5274 linkq.mimo = 15; 5275 5276 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: mimo = %d\n", __func__, linkq.mimo); 5277 5278 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5279 5280 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, 1); 5281 } 5282 5283 /* 5284 * Broadcast node is used to send group-addressed and management frames. 5285 */ 5286 static int 5287 iwn_add_broadcast_node(struct iwn_softc *sc, int async) 5288 { 5289 struct iwn_ops *ops = &sc->ops; 5290 struct ieee80211com *ic = &sc->sc_ic; 5291 struct iwn_node_info node; 5292 struct iwn_cmd_link_quality linkq; 5293 uint8_t txant; 5294 int i, error; 5295 5296 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5297 5298 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5299 5300 memset(&node, 0, sizeof node); 5301 IEEE80211_ADDR_COPY(node.macaddr, ieee80211broadcastaddr); 5302 node.id = sc->broadcast_id; 5303 DPRINTF(sc, IWN_DEBUG_RESET, "%s: adding broadcast node\n", __func__); 5304 if ((error = ops->add_node(sc, &node, async)) != 0) 5305 return error; 5306 5307 /* Use the first valid TX antenna. */ 5308 txant = IWN_LSB(sc->txchainmask); 5309 5310 memset(&linkq, 0, sizeof linkq); 5311 linkq.id = sc->broadcast_id; 5312 linkq.antmsk_1stream = iwn_get_1stream_tx_antmask(sc); 5313 linkq.antmsk_2stream = iwn_get_2stream_tx_antmask(sc); 5314 linkq.ampdu_max = 64; 5315 linkq.ampdu_threshold = 3; 5316 linkq.ampdu_limit = htole16(4000); /* 4ms */ 5317 5318 /* Use lowest mandatory bit-rate. */ 5319 /* XXX rate table lookup? */ 5320 if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) 5321 linkq.retry[0] = htole32(0xd); 5322 else 5323 linkq.retry[0] = htole32(10 | IWN_RFLAG_CCK); 5324 linkq.retry[0] |= htole32(IWN_RFLAG_ANT(txant)); 5325 /* Use same bit-rate for all TX retries. */ 5326 for (i = 1; i < IWN_MAX_TX_RETRIES; i++) { 5327 linkq.retry[i] = linkq.retry[0]; 5328 } 5329 5330 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5331 5332 return iwn_cmd(sc, IWN_CMD_LINK_QUALITY, &linkq, sizeof linkq, async); 5333 } 5334 5335 static int 5336 iwn_updateedca(struct ieee80211com *ic) 5337 { 5338 #define IWN_EXP2(x) ((1 << (x)) - 1) /* CWmin = 2^ECWmin - 1 */ 5339 struct iwn_softc *sc = ic->ic_softc; 5340 struct iwn_edca_params cmd; 5341 int aci; 5342 5343 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5344 5345 memset(&cmd, 0, sizeof cmd); 5346 cmd.flags = htole32(IWN_EDCA_UPDATE); 5347 5348 IEEE80211_LOCK(ic); 5349 for (aci = 0; aci < WME_NUM_AC; aci++) { 5350 const struct wmeParams *ac = 5351 &ic->ic_wme.wme_chanParams.cap_wmeParams[aci]; 5352 cmd.ac[aci].aifsn = ac->wmep_aifsn; 5353 cmd.ac[aci].cwmin = htole16(IWN_EXP2(ac->wmep_logcwmin)); 5354 cmd.ac[aci].cwmax = htole16(IWN_EXP2(ac->wmep_logcwmax)); 5355 cmd.ac[aci].txoplimit = 5356 htole16(IEEE80211_TXOP_TO_US(ac->wmep_txopLimit)); 5357 } 5358 IEEE80211_UNLOCK(ic); 5359 5360 IWN_LOCK(sc); 5361 (void)iwn_cmd(sc, IWN_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1); 5362 IWN_UNLOCK(sc); 5363 5364 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5365 5366 return 0; 5367 #undef IWN_EXP2 5368 } 5369 5370 static void 5371 iwn_update_mcast(struct ieee80211com *ic) 5372 { 5373 /* Ignore */ 5374 } 5375 5376 static void 5377 iwn_set_led(struct iwn_softc *sc, uint8_t which, uint8_t off, uint8_t on) 5378 { 5379 struct iwn_cmd_led led; 5380 5381 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5382 5383 #if 0 5384 /* XXX don't set LEDs during scan? */ 5385 if (sc->sc_is_scanning) 5386 return; 5387 #endif 5388 5389 /* Clear microcode LED ownership. */ 5390 IWN_CLRBITS(sc, IWN_LED, IWN_LED_BSM_CTRL); 5391 5392 led.which = which; 5393 led.unit = htole32(10000); /* on/off in unit of 100ms */ 5394 led.off = off; 5395 led.on = on; 5396 (void)iwn_cmd(sc, IWN_CMD_SET_LED, &led, sizeof led, 1); 5397 } 5398 5399 /* 5400 * Set the critical temperature at which the firmware will stop the radio 5401 * and notify us. 5402 */ 5403 static int 5404 iwn_set_critical_temp(struct iwn_softc *sc) 5405 { 5406 struct iwn_critical_temp crit; 5407 int32_t temp; 5408 5409 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5410 5411 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CTEMP_STOP_RF); 5412 5413 if (sc->hw_type == IWN_HW_REV_TYPE_5150) 5414 temp = (IWN_CTOK(110) - sc->temp_off) * -5; 5415 else if (sc->hw_type == IWN_HW_REV_TYPE_4965) 5416 temp = IWN_CTOK(110); 5417 else 5418 temp = 110; 5419 memset(&crit, 0, sizeof crit); 5420 crit.tempR = htole32(temp); 5421 DPRINTF(sc, IWN_DEBUG_RESET, "setting critical temp to %d\n", temp); 5422 return iwn_cmd(sc, IWN_CMD_SET_CRITICAL_TEMP, &crit, sizeof crit, 0); 5423 } 5424 5425 static int 5426 iwn_set_timing(struct iwn_softc *sc, struct ieee80211_node *ni) 5427 { 5428 struct iwn_cmd_timing cmd; 5429 uint64_t val, mod; 5430 5431 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5432 5433 memset(&cmd, 0, sizeof cmd); 5434 memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t)); 5435 cmd.bintval = htole16(ni->ni_intval); 5436 cmd.lintval = htole16(10); 5437 5438 /* Compute remaining time until next beacon. */ 5439 val = (uint64_t)ni->ni_intval * IEEE80211_DUR_TU; 5440 mod = le64toh(cmd.tstamp) % val; 5441 cmd.binitval = htole32((uint32_t)(val - mod)); 5442 5443 DPRINTF(sc, IWN_DEBUG_RESET, "timing bintval=%u tstamp=%ju, init=%u\n", 5444 ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod)); 5445 5446 return iwn_cmd(sc, IWN_CMD_TIMING, &cmd, sizeof cmd, 1); 5447 } 5448 5449 static void 5450 iwn4965_power_calibration(struct iwn_softc *sc, int temp) 5451 { 5452 struct ieee80211com *ic = &sc->sc_ic; 5453 5454 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5455 5456 /* Adjust TX power if need be (delta >= 3 degC). */ 5457 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: temperature %d->%d\n", 5458 __func__, sc->temp, temp); 5459 if (abs(temp - sc->temp) >= 3) { 5460 /* Record temperature of last calibration. */ 5461 sc->temp = temp; 5462 (void)iwn4965_set_txpower(sc, ic->ic_bsschan, 1); 5463 } 5464 } 5465 5466 /* 5467 * Set TX power for current channel (each rate has its own power settings). 5468 * This function takes into account the regulatory information from EEPROM, 5469 * the current temperature and the current voltage. 5470 */ 5471 static int 5472 iwn4965_set_txpower(struct iwn_softc *sc, struct ieee80211_channel *ch, 5473 int async) 5474 { 5475 /* Fixed-point arithmetic division using a n-bit fractional part. */ 5476 #define fdivround(a, b, n) \ 5477 ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n)) 5478 /* Linear interpolation. */ 5479 #define interpolate(x, x1, y1, x2, y2, n) \ 5480 ((y1) + fdivround(((int)(x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n)) 5481 5482 static const int tdiv[IWN_NATTEN_GROUPS] = { 9, 8, 8, 8, 6 }; 5483 struct iwn_ucode_info *uc = &sc->ucode_info; 5484 struct iwn4965_cmd_txpower cmd; 5485 struct iwn4965_eeprom_chan_samples *chans; 5486 const uint8_t *rf_gain, *dsp_gain; 5487 int32_t vdiff, tdiff; 5488 int i, c, grp, maxpwr; 5489 uint8_t chan; 5490 5491 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 5492 /* Retrieve current channel from last RXON. */ 5493 chan = sc->rxon->chan; 5494 DPRINTF(sc, IWN_DEBUG_RESET, "setting TX power for channel %d\n", 5495 chan); 5496 5497 memset(&cmd, 0, sizeof cmd); 5498 cmd.band = IEEE80211_IS_CHAN_5GHZ(ch) ? 0 : 1; 5499 cmd.chan = chan; 5500 5501 if (IEEE80211_IS_CHAN_5GHZ(ch)) { 5502 maxpwr = sc->maxpwr5GHz; 5503 rf_gain = iwn4965_rf_gain_5ghz; 5504 dsp_gain = iwn4965_dsp_gain_5ghz; 5505 } else { 5506 maxpwr = sc->maxpwr2GHz; 5507 rf_gain = iwn4965_rf_gain_2ghz; 5508 dsp_gain = iwn4965_dsp_gain_2ghz; 5509 } 5510 5511 /* Compute voltage compensation. */ 5512 vdiff = ((int32_t)le32toh(uc->volt) - sc->eeprom_voltage) / 7; 5513 if (vdiff > 0) 5514 vdiff *= 2; 5515 if (abs(vdiff) > 2) 5516 vdiff = 0; 5517 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5518 "%s: voltage compensation=%d (UCODE=%d, EEPROM=%d)\n", 5519 __func__, vdiff, le32toh(uc->volt), sc->eeprom_voltage); 5520 5521 /* Get channel attenuation group. */ 5522 if (chan <= 20) /* 1-20 */ 5523 grp = 4; 5524 else if (chan <= 43) /* 34-43 */ 5525 grp = 0; 5526 else if (chan <= 70) /* 44-70 */ 5527 grp = 1; 5528 else if (chan <= 124) /* 71-124 */ 5529 grp = 2; 5530 else /* 125-200 */ 5531 grp = 3; 5532 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5533 "%s: chan %d, attenuation group=%d\n", __func__, chan, grp); 5534 5535 /* Get channel sub-band. */ 5536 for (i = 0; i < IWN_NBANDS; i++) 5537 if (sc->bands[i].lo != 0 && 5538 sc->bands[i].lo <= chan && chan <= sc->bands[i].hi) 5539 break; 5540 if (i == IWN_NBANDS) /* Can't happen in real-life. */ 5541 return EINVAL; 5542 chans = sc->bands[i].chans; 5543 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5544 "%s: chan %d sub-band=%d\n", __func__, chan, i); 5545 5546 for (c = 0; c < 2; c++) { 5547 uint8_t power, gain, temp; 5548 int maxchpwr, pwr, ridx, idx; 5549 5550 power = interpolate(chan, 5551 chans[0].num, chans[0].samples[c][1].power, 5552 chans[1].num, chans[1].samples[c][1].power, 1); 5553 gain = interpolate(chan, 5554 chans[0].num, chans[0].samples[c][1].gain, 5555 chans[1].num, chans[1].samples[c][1].gain, 1); 5556 temp = interpolate(chan, 5557 chans[0].num, chans[0].samples[c][1].temp, 5558 chans[1].num, chans[1].samples[c][1].temp, 1); 5559 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5560 "%s: Tx chain %d: power=%d gain=%d temp=%d\n", 5561 __func__, c, power, gain, temp); 5562 5563 /* Compute temperature compensation. */ 5564 tdiff = ((sc->temp - temp) * 2) / tdiv[grp]; 5565 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5566 "%s: temperature compensation=%d (current=%d, EEPROM=%d)\n", 5567 __func__, tdiff, sc->temp, temp); 5568 5569 for (ridx = 0; ridx <= IWN_RIDX_MAX; ridx++) { 5570 /* Convert dBm to half-dBm. */ 5571 maxchpwr = sc->maxpwr[chan] * 2; 5572 if ((ridx / 8) & 1) 5573 maxchpwr -= 6; /* MIMO 2T: -3dB */ 5574 5575 pwr = maxpwr; 5576 5577 /* Adjust TX power based on rate. */ 5578 if ((ridx % 8) == 5) 5579 pwr -= 15; /* OFDM48: -7.5dB */ 5580 else if ((ridx % 8) == 6) 5581 pwr -= 17; /* OFDM54: -8.5dB */ 5582 else if ((ridx % 8) == 7) 5583 pwr -= 20; /* OFDM60: -10dB */ 5584 else 5585 pwr -= 10; /* Others: -5dB */ 5586 5587 /* Do not exceed channel max TX power. */ 5588 if (pwr > maxchpwr) 5589 pwr = maxchpwr; 5590 5591 idx = gain - (pwr - power) - tdiff - vdiff; 5592 if ((ridx / 8) & 1) /* MIMO */ 5593 idx += (int32_t)le32toh(uc->atten[grp][c]); 5594 5595 if (cmd.band == 0) 5596 idx += 9; /* 5GHz */ 5597 if (ridx == IWN_RIDX_MAX) 5598 idx += 5; /* CCK */ 5599 5600 /* Make sure idx stays in a valid range. */ 5601 if (idx < 0) 5602 idx = 0; 5603 else if (idx > IWN4965_MAX_PWR_INDEX) 5604 idx = IWN4965_MAX_PWR_INDEX; 5605 5606 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5607 "%s: Tx chain %d, rate idx %d: power=%d\n", 5608 __func__, c, ridx, idx); 5609 cmd.power[ridx].rf_gain[c] = rf_gain[idx]; 5610 cmd.power[ridx].dsp_gain[c] = dsp_gain[idx]; 5611 } 5612 } 5613 5614 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_TXPOW, 5615 "%s: set tx power for chan %d\n", __func__, chan); 5616 return iwn_cmd(sc, IWN_CMD_TXPOWER, &cmd, sizeof cmd, async); 5617 5618 #undef interpolate 5619 #undef fdivround 5620 } 5621 5622 static int 5623 iwn5000_set_txpower(struct iwn_softc *sc, struct ieee80211_channel *ch, 5624 int async) 5625 { 5626 struct iwn5000_cmd_txpower cmd; 5627 int cmdid; 5628 5629 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5630 5631 /* 5632 * TX power calibration is handled automatically by the firmware 5633 * for 5000 Series. 5634 */ 5635 memset(&cmd, 0, sizeof cmd); 5636 cmd.global_limit = 2 * IWN5000_TXPOWER_MAX_DBM; /* 16 dBm */ 5637 cmd.flags = IWN5000_TXPOWER_NO_CLOSED; 5638 cmd.srv_limit = IWN5000_TXPOWER_AUTO; 5639 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5640 "%s: setting TX power; rev=%d\n", 5641 __func__, 5642 IWN_UCODE_API(sc->ucode_rev)); 5643 if (IWN_UCODE_API(sc->ucode_rev) == 1) 5644 cmdid = IWN_CMD_TXPOWER_DBM_V1; 5645 else 5646 cmdid = IWN_CMD_TXPOWER_DBM; 5647 return iwn_cmd(sc, cmdid, &cmd, sizeof cmd, async); 5648 } 5649 5650 /* 5651 * Retrieve the maximum RSSI (in dBm) among receivers. 5652 */ 5653 static int 5654 iwn4965_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5655 { 5656 struct iwn4965_rx_phystat *phy = (void *)stat->phybuf; 5657 uint8_t mask, agc; 5658 int rssi; 5659 5660 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5661 5662 mask = (le16toh(phy->antenna) >> 4) & IWN_ANT_ABC; 5663 agc = (le16toh(phy->agc) >> 7) & 0x7f; 5664 5665 rssi = 0; 5666 if (mask & IWN_ANT_A) 5667 rssi = MAX(rssi, phy->rssi[0]); 5668 if (mask & IWN_ANT_B) 5669 rssi = MAX(rssi, phy->rssi[2]); 5670 if (mask & IWN_ANT_C) 5671 rssi = MAX(rssi, phy->rssi[4]); 5672 5673 DPRINTF(sc, IWN_DEBUG_RECV, 5674 "%s: agc %d mask 0x%x rssi %d %d %d result %d\n", __func__, agc, 5675 mask, phy->rssi[0], phy->rssi[2], phy->rssi[4], 5676 rssi - agc - IWN_RSSI_TO_DBM); 5677 return rssi - agc - IWN_RSSI_TO_DBM; 5678 } 5679 5680 static int 5681 iwn5000_get_rssi(struct iwn_softc *sc, struct iwn_rx_stat *stat) 5682 { 5683 struct iwn5000_rx_phystat *phy = (void *)stat->phybuf; 5684 uint8_t agc; 5685 int rssi; 5686 5687 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5688 5689 agc = (le32toh(phy->agc) >> 9) & 0x7f; 5690 5691 rssi = MAX(le16toh(phy->rssi[0]) & 0xff, 5692 le16toh(phy->rssi[1]) & 0xff); 5693 rssi = MAX(le16toh(phy->rssi[2]) & 0xff, rssi); 5694 5695 DPRINTF(sc, IWN_DEBUG_RECV, 5696 "%s: agc %d rssi %d %d %d result %d\n", __func__, agc, 5697 phy->rssi[0], phy->rssi[1], phy->rssi[2], 5698 rssi - agc - IWN_RSSI_TO_DBM); 5699 return rssi - agc - IWN_RSSI_TO_DBM; 5700 } 5701 5702 /* 5703 * Retrieve the average noise (in dBm) among receivers. 5704 */ 5705 static int 5706 iwn_get_noise(const struct iwn_rx_general_stats *stats) 5707 { 5708 int i, total, nbant, noise; 5709 5710 total = nbant = 0; 5711 for (i = 0; i < 3; i++) { 5712 if ((noise = le32toh(stats->noise[i]) & 0xff) == 0) 5713 continue; 5714 total += noise; 5715 nbant++; 5716 } 5717 /* There should be at least one antenna but check anyway. */ 5718 return (nbant == 0) ? -127 : (total / nbant) - 107; 5719 } 5720 5721 /* 5722 * Compute temperature (in degC) from last received statistics. 5723 */ 5724 static int 5725 iwn4965_get_temperature(struct iwn_softc *sc) 5726 { 5727 struct iwn_ucode_info *uc = &sc->ucode_info; 5728 int32_t r1, r2, r3, r4, temp; 5729 5730 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5731 5732 r1 = le32toh(uc->temp[0].chan20MHz); 5733 r2 = le32toh(uc->temp[1].chan20MHz); 5734 r3 = le32toh(uc->temp[2].chan20MHz); 5735 r4 = le32toh(sc->rawtemp); 5736 5737 if (r1 == r3) /* Prevents division by 0 (should not happen). */ 5738 return 0; 5739 5740 /* Sign-extend 23-bit R4 value to 32-bit. */ 5741 r4 = ((r4 & 0xffffff) ^ 0x800000) - 0x800000; 5742 /* Compute temperature in Kelvin. */ 5743 temp = (259 * (r4 - r2)) / (r3 - r1); 5744 temp = (temp * 97) / 100 + 8; 5745 5746 DPRINTF(sc, IWN_DEBUG_ANY, "temperature %dK/%dC\n", temp, 5747 IWN_KTOC(temp)); 5748 return IWN_KTOC(temp); 5749 } 5750 5751 static int 5752 iwn5000_get_temperature(struct iwn_softc *sc) 5753 { 5754 int32_t temp; 5755 5756 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5757 5758 /* 5759 * Temperature is not used by the driver for 5000 Series because 5760 * TX power calibration is handled by firmware. 5761 */ 5762 temp = le32toh(sc->rawtemp); 5763 if (sc->hw_type == IWN_HW_REV_TYPE_5150) { 5764 temp = (temp / -5) + sc->temp_off; 5765 temp = IWN_KTOC(temp); 5766 } 5767 return temp; 5768 } 5769 5770 /* 5771 * Initialize sensitivity calibration state machine. 5772 */ 5773 static int 5774 iwn_init_sensitivity(struct iwn_softc *sc) 5775 { 5776 struct iwn_ops *ops = &sc->ops; 5777 struct iwn_calib_state *calib = &sc->calib; 5778 uint32_t flags; 5779 int error; 5780 5781 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5782 5783 /* Reset calibration state machine. */ 5784 memset(calib, 0, sizeof (*calib)); 5785 calib->state = IWN_CALIB_STATE_INIT; 5786 calib->cck_state = IWN_CCK_STATE_HIFA; 5787 /* Set initial correlation values. */ 5788 calib->ofdm_x1 = sc->limits->min_ofdm_x1; 5789 calib->ofdm_mrc_x1 = sc->limits->min_ofdm_mrc_x1; 5790 calib->ofdm_x4 = sc->limits->min_ofdm_x4; 5791 calib->ofdm_mrc_x4 = sc->limits->min_ofdm_mrc_x4; 5792 calib->cck_x4 = 125; 5793 calib->cck_mrc_x4 = sc->limits->min_cck_mrc_x4; 5794 calib->energy_cck = sc->limits->energy_cck; 5795 5796 /* Write initial sensitivity. */ 5797 if ((error = iwn_send_sensitivity(sc)) != 0) 5798 return error; 5799 5800 /* Write initial gains. */ 5801 if ((error = ops->init_gains(sc)) != 0) 5802 return error; 5803 5804 /* Request statistics at each beacon interval. */ 5805 flags = 0; 5806 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending request for statistics\n", 5807 __func__); 5808 return iwn_cmd(sc, IWN_CMD_GET_STATISTICS, &flags, sizeof flags, 1); 5809 } 5810 5811 /* 5812 * Collect noise and RSSI statistics for the first 20 beacons received 5813 * after association and use them to determine connected antennas and 5814 * to set differential gains. 5815 */ 5816 static void 5817 iwn_collect_noise(struct iwn_softc *sc, 5818 const struct iwn_rx_general_stats *stats) 5819 { 5820 struct iwn_ops *ops = &sc->ops; 5821 struct iwn_calib_state *calib = &sc->calib; 5822 struct ieee80211com *ic = &sc->sc_ic; 5823 uint32_t val; 5824 int i; 5825 5826 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 5827 5828 /* Accumulate RSSI and noise for all 3 antennas. */ 5829 for (i = 0; i < 3; i++) { 5830 calib->rssi[i] += le32toh(stats->rssi[i]) & 0xff; 5831 calib->noise[i] += le32toh(stats->noise[i]) & 0xff; 5832 } 5833 /* NB: We update differential gains only once after 20 beacons. */ 5834 if (++calib->nbeacons < 20) 5835 return; 5836 5837 /* Determine highest average RSSI. */ 5838 val = MAX(calib->rssi[0], calib->rssi[1]); 5839 val = MAX(calib->rssi[2], val); 5840 5841 /* Determine which antennas are connected. */ 5842 sc->chainmask = sc->rxchainmask; 5843 for (i = 0; i < 3; i++) 5844 if (val - calib->rssi[i] > 15 * 20) 5845 sc->chainmask &= ~(1 << i); 5846 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5847 "%s: RX chains mask: theoretical=0x%x, actual=0x%x\n", 5848 __func__, sc->rxchainmask, sc->chainmask); 5849 5850 /* If none of the TX antennas are connected, keep at least one. */ 5851 if ((sc->chainmask & sc->txchainmask) == 0) 5852 sc->chainmask |= IWN_LSB(sc->txchainmask); 5853 5854 (void)ops->set_gains(sc); 5855 calib->state = IWN_CALIB_STATE_RUN; 5856 5857 #ifdef notyet 5858 /* XXX Disable RX chains with no antennas connected. */ 5859 sc->rxon->rxchain = htole16(IWN_RXCHAIN_SEL(sc->chainmask)); 5860 if (sc->sc_is_scanning) 5861 device_printf(sc->sc_dev, 5862 "%s: is_scanning set, before RXON\n", 5863 __func__); 5864 (void)iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 5865 #endif 5866 5867 /* Enable power-saving mode if requested by user. */ 5868 if (ic->ic_flags & IEEE80211_F_PMGTON) 5869 (void)iwn_set_pslevel(sc, 0, 3, 1); 5870 5871 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 5872 5873 } 5874 5875 static int 5876 iwn4965_init_gains(struct iwn_softc *sc) 5877 { 5878 struct iwn_phy_calib_gain cmd; 5879 5880 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5881 5882 memset(&cmd, 0, sizeof cmd); 5883 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 5884 /* Differential gains initially set to 0 for all 3 antennas. */ 5885 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 5886 "%s: setting initial differential gains\n", __func__); 5887 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 5888 } 5889 5890 static int 5891 iwn5000_init_gains(struct iwn_softc *sc) 5892 { 5893 struct iwn_phy_calib cmd; 5894 5895 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5896 5897 memset(&cmd, 0, sizeof cmd); 5898 cmd.code = sc->reset_noise_gain; 5899 cmd.ngroups = 1; 5900 cmd.isvalid = 1; 5901 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 5902 "%s: setting initial differential gains\n", __func__); 5903 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 5904 } 5905 5906 static int 5907 iwn4965_set_gains(struct iwn_softc *sc) 5908 { 5909 struct iwn_calib_state *calib = &sc->calib; 5910 struct iwn_phy_calib_gain cmd; 5911 int i, delta, noise; 5912 5913 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5914 5915 /* Get minimal noise among connected antennas. */ 5916 noise = INT_MAX; /* NB: There's at least one antenna. */ 5917 for (i = 0; i < 3; i++) 5918 if (sc->chainmask & (1 << i)) 5919 noise = MIN(calib->noise[i], noise); 5920 5921 memset(&cmd, 0, sizeof cmd); 5922 cmd.code = IWN4965_PHY_CALIB_DIFF_GAIN; 5923 /* Set differential gains for connected antennas. */ 5924 for (i = 0; i < 3; i++) { 5925 if (sc->chainmask & (1 << i)) { 5926 /* Compute attenuation (in unit of 1.5dB). */ 5927 delta = (noise - (int32_t)calib->noise[i]) / 30; 5928 /* NB: delta <= 0 */ 5929 /* Limit to [-4.5dB,0]. */ 5930 cmd.gain[i] = MIN(abs(delta), 3); 5931 if (delta < 0) 5932 cmd.gain[i] |= 1 << 2; /* sign bit */ 5933 } 5934 } 5935 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 5936 "setting differential gains Ant A/B/C: %x/%x/%x (%x)\n", 5937 cmd.gain[0], cmd.gain[1], cmd.gain[2], sc->chainmask); 5938 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 5939 } 5940 5941 static int 5942 iwn5000_set_gains(struct iwn_softc *sc) 5943 { 5944 struct iwn_calib_state *calib = &sc->calib; 5945 struct iwn_phy_calib_gain cmd; 5946 int i, ant, div, delta; 5947 5948 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 5949 5950 /* We collected 20 beacons and !=6050 need a 1.5 factor. */ 5951 div = (sc->hw_type == IWN_HW_REV_TYPE_6050) ? 20 : 30; 5952 5953 memset(&cmd, 0, sizeof cmd); 5954 cmd.code = sc->noise_gain; 5955 cmd.ngroups = 1; 5956 cmd.isvalid = 1; 5957 /* Get first available RX antenna as referential. */ 5958 ant = IWN_LSB(sc->rxchainmask); 5959 /* Set differential gains for other antennas. */ 5960 for (i = ant + 1; i < 3; i++) { 5961 if (sc->chainmask & (1 << i)) { 5962 /* The delta is relative to antenna "ant". */ 5963 delta = ((int32_t)calib->noise[ant] - 5964 (int32_t)calib->noise[i]) / div; 5965 /* Limit to [-4.5dB,+4.5dB]. */ 5966 cmd.gain[i - 1] = MIN(abs(delta), 3); 5967 if (delta < 0) 5968 cmd.gain[i - 1] |= 1 << 2; /* sign bit */ 5969 } 5970 } 5971 DPRINTF(sc, IWN_DEBUG_CALIBRATE | IWN_DEBUG_XMIT, 5972 "setting differential gains Ant B/C: %x/%x (%x)\n", 5973 cmd.gain[0], cmd.gain[1], sc->chainmask); 5974 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 1); 5975 } 5976 5977 /* 5978 * Tune RF RX sensitivity based on the number of false alarms detected 5979 * during the last beacon period. 5980 */ 5981 static void 5982 iwn_tune_sensitivity(struct iwn_softc *sc, const struct iwn_rx_stats *stats) 5983 { 5984 #define inc(val, inc, max) \ 5985 if ((val) < (max)) { \ 5986 if ((val) < (max) - (inc)) \ 5987 (val) += (inc); \ 5988 else \ 5989 (val) = (max); \ 5990 needs_update = 1; \ 5991 } 5992 #define dec(val, dec, min) \ 5993 if ((val) > (min)) { \ 5994 if ((val) > (min) + (dec)) \ 5995 (val) -= (dec); \ 5996 else \ 5997 (val) = (min); \ 5998 needs_update = 1; \ 5999 } 6000 6001 const struct iwn_sensitivity_limits *limits = sc->limits; 6002 struct iwn_calib_state *calib = &sc->calib; 6003 uint32_t val, rxena, fa; 6004 uint32_t energy[3], energy_min; 6005 uint8_t noise[3], noise_ref; 6006 int i, needs_update = 0; 6007 6008 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6009 6010 /* Check that we've been enabled long enough. */ 6011 if ((rxena = le32toh(stats->general.load)) == 0){ 6012 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end not so long\n", __func__); 6013 return; 6014 } 6015 6016 /* Compute number of false alarms since last call for OFDM. */ 6017 fa = le32toh(stats->ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6018 fa += le32toh(stats->ofdm.fa) - calib->fa_ofdm; 6019 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6020 6021 if (fa > 50 * rxena) { 6022 /* High false alarm count, decrease sensitivity. */ 6023 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6024 "%s: OFDM high false alarm count: %u\n", __func__, fa); 6025 inc(calib->ofdm_x1, 1, limits->max_ofdm_x1); 6026 inc(calib->ofdm_mrc_x1, 1, limits->max_ofdm_mrc_x1); 6027 inc(calib->ofdm_x4, 1, limits->max_ofdm_x4); 6028 inc(calib->ofdm_mrc_x4, 1, limits->max_ofdm_mrc_x4); 6029 6030 } else if (fa < 5 * rxena) { 6031 /* Low false alarm count, increase sensitivity. */ 6032 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6033 "%s: OFDM low false alarm count: %u\n", __func__, fa); 6034 dec(calib->ofdm_x1, 1, limits->min_ofdm_x1); 6035 dec(calib->ofdm_mrc_x1, 1, limits->min_ofdm_mrc_x1); 6036 dec(calib->ofdm_x4, 1, limits->min_ofdm_x4); 6037 dec(calib->ofdm_mrc_x4, 1, limits->min_ofdm_mrc_x4); 6038 } 6039 6040 /* Compute maximum noise among 3 receivers. */ 6041 for (i = 0; i < 3; i++) 6042 noise[i] = (le32toh(stats->general.noise[i]) >> 8) & 0xff; 6043 val = MAX(noise[0], noise[1]); 6044 val = MAX(noise[2], val); 6045 /* Insert it into our samples table. */ 6046 calib->noise_samples[calib->cur_noise_sample] = val; 6047 calib->cur_noise_sample = (calib->cur_noise_sample + 1) % 20; 6048 6049 /* Compute maximum noise among last 20 samples. */ 6050 noise_ref = calib->noise_samples[0]; 6051 for (i = 1; i < 20; i++) 6052 noise_ref = MAX(noise_ref, calib->noise_samples[i]); 6053 6054 /* Compute maximum energy among 3 receivers. */ 6055 for (i = 0; i < 3; i++) 6056 energy[i] = le32toh(stats->general.energy[i]); 6057 val = MIN(energy[0], energy[1]); 6058 val = MIN(energy[2], val); 6059 /* Insert it into our samples table. */ 6060 calib->energy_samples[calib->cur_energy_sample] = val; 6061 calib->cur_energy_sample = (calib->cur_energy_sample + 1) % 10; 6062 6063 /* Compute minimum energy among last 10 samples. */ 6064 energy_min = calib->energy_samples[0]; 6065 for (i = 1; i < 10; i++) 6066 energy_min = MAX(energy_min, calib->energy_samples[i]); 6067 energy_min += 6; 6068 6069 /* Compute number of false alarms since last call for CCK. */ 6070 fa = le32toh(stats->cck.bad_plcp) - calib->bad_plcp_cck; 6071 fa += le32toh(stats->cck.fa) - calib->fa_cck; 6072 fa *= 200 * IEEE80211_DUR_TU; /* 200TU */ 6073 6074 if (fa > 50 * rxena) { 6075 /* High false alarm count, decrease sensitivity. */ 6076 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6077 "%s: CCK high false alarm count: %u\n", __func__, fa); 6078 calib->cck_state = IWN_CCK_STATE_HIFA; 6079 calib->low_fa = 0; 6080 6081 if (calib->cck_x4 > 160) { 6082 calib->noise_ref = noise_ref; 6083 if (calib->energy_cck > 2) 6084 dec(calib->energy_cck, 2, energy_min); 6085 } 6086 if (calib->cck_x4 < 160) { 6087 calib->cck_x4 = 161; 6088 needs_update = 1; 6089 } else 6090 inc(calib->cck_x4, 3, limits->max_cck_x4); 6091 6092 inc(calib->cck_mrc_x4, 3, limits->max_cck_mrc_x4); 6093 6094 } else if (fa < 5 * rxena) { 6095 /* Low false alarm count, increase sensitivity. */ 6096 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6097 "%s: CCK low false alarm count: %u\n", __func__, fa); 6098 calib->cck_state = IWN_CCK_STATE_LOFA; 6099 calib->low_fa++; 6100 6101 if (calib->cck_state != IWN_CCK_STATE_INIT && 6102 (((int32_t)calib->noise_ref - (int32_t)noise_ref) > 2 || 6103 calib->low_fa > 100)) { 6104 inc(calib->energy_cck, 2, limits->min_energy_cck); 6105 dec(calib->cck_x4, 3, limits->min_cck_x4); 6106 dec(calib->cck_mrc_x4, 3, limits->min_cck_mrc_x4); 6107 } 6108 } else { 6109 /* Not worth to increase or decrease sensitivity. */ 6110 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6111 "%s: CCK normal false alarm count: %u\n", __func__, fa); 6112 calib->low_fa = 0; 6113 calib->noise_ref = noise_ref; 6114 6115 if (calib->cck_state == IWN_CCK_STATE_HIFA) { 6116 /* Previous interval had many false alarms. */ 6117 dec(calib->energy_cck, 8, energy_min); 6118 } 6119 calib->cck_state = IWN_CCK_STATE_INIT; 6120 } 6121 6122 if (needs_update) 6123 (void)iwn_send_sensitivity(sc); 6124 6125 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6126 6127 #undef dec 6128 #undef inc 6129 } 6130 6131 static int 6132 iwn_send_sensitivity(struct iwn_softc *sc) 6133 { 6134 struct iwn_calib_state *calib = &sc->calib; 6135 struct iwn_enhanced_sensitivity_cmd cmd; 6136 int len; 6137 6138 memset(&cmd, 0, sizeof cmd); 6139 len = sizeof (struct iwn_sensitivity_cmd); 6140 cmd.which = IWN_SENSITIVITY_WORKTBL; 6141 /* OFDM modulation. */ 6142 cmd.corr_ofdm_x1 = htole16(calib->ofdm_x1); 6143 cmd.corr_ofdm_mrc_x1 = htole16(calib->ofdm_mrc_x1); 6144 cmd.corr_ofdm_x4 = htole16(calib->ofdm_x4); 6145 cmd.corr_ofdm_mrc_x4 = htole16(calib->ofdm_mrc_x4); 6146 cmd.energy_ofdm = htole16(sc->limits->energy_ofdm); 6147 cmd.energy_ofdm_th = htole16(62); 6148 /* CCK modulation. */ 6149 cmd.corr_cck_x4 = htole16(calib->cck_x4); 6150 cmd.corr_cck_mrc_x4 = htole16(calib->cck_mrc_x4); 6151 cmd.energy_cck = htole16(calib->energy_cck); 6152 /* Barker modulation: use default values. */ 6153 cmd.corr_barker = htole16(190); 6154 cmd.corr_barker_mrc = htole16(sc->limits->barker_mrc); 6155 6156 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6157 "%s: set sensitivity %d/%d/%d/%d/%d/%d/%d\n", __func__, 6158 calib->ofdm_x1, calib->ofdm_mrc_x1, calib->ofdm_x4, 6159 calib->ofdm_mrc_x4, calib->cck_x4, 6160 calib->cck_mrc_x4, calib->energy_cck); 6161 6162 if (!(sc->sc_flags & IWN_FLAG_ENH_SENS)) 6163 goto send; 6164 /* Enhanced sensitivity settings. */ 6165 len = sizeof (struct iwn_enhanced_sensitivity_cmd); 6166 cmd.ofdm_det_slope_mrc = htole16(668); 6167 cmd.ofdm_det_icept_mrc = htole16(4); 6168 cmd.ofdm_det_slope = htole16(486); 6169 cmd.ofdm_det_icept = htole16(37); 6170 cmd.cck_det_slope_mrc = htole16(853); 6171 cmd.cck_det_icept_mrc = htole16(4); 6172 cmd.cck_det_slope = htole16(476); 6173 cmd.cck_det_icept = htole16(99); 6174 send: 6175 return iwn_cmd(sc, IWN_CMD_SET_SENSITIVITY, &cmd, len, 1); 6176 } 6177 6178 /* 6179 * Look at the increase of PLCP errors over time; if it exceeds 6180 * a programmed threshold then trigger an RF retune. 6181 */ 6182 static void 6183 iwn_check_rx_recovery(struct iwn_softc *sc, struct iwn_stats *rs) 6184 { 6185 int32_t delta_ofdm, delta_ht, delta_cck; 6186 struct iwn_calib_state *calib = &sc->calib; 6187 int delta_ticks, cur_ticks; 6188 int delta_msec; 6189 int thresh; 6190 6191 /* 6192 * Calculate the difference between the current and 6193 * previous statistics. 6194 */ 6195 delta_cck = le32toh(rs->rx.cck.bad_plcp) - calib->bad_plcp_cck; 6196 delta_ofdm = le32toh(rs->rx.ofdm.bad_plcp) - calib->bad_plcp_ofdm; 6197 delta_ht = le32toh(rs->rx.ht.bad_plcp) - calib->bad_plcp_ht; 6198 6199 /* 6200 * Calculate the delta in time between successive statistics 6201 * messages. Yes, it can roll over; so we make sure that 6202 * this doesn't happen. 6203 * 6204 * XXX go figure out what to do about rollover 6205 * XXX go figure out what to do if ticks rolls over to -ve instead! 6206 * XXX go stab signed integer overflow undefined-ness in the face. 6207 */ 6208 cur_ticks = ticks; 6209 delta_ticks = cur_ticks - sc->last_calib_ticks; 6210 6211 /* 6212 * If any are negative, then the firmware likely reset; so just 6213 * bail. We'll pick this up next time. 6214 */ 6215 if (delta_cck < 0 || delta_ofdm < 0 || delta_ht < 0 || delta_ticks < 0) 6216 return; 6217 6218 /* 6219 * delta_ticks is in ticks; we need to convert it up to milliseconds 6220 * so we can do some useful math with it. 6221 */ 6222 delta_msec = ticks_to_msecs(delta_ticks); 6223 6224 /* 6225 * Calculate what our threshold is given the current delta_msec. 6226 */ 6227 thresh = sc->base_params->plcp_err_threshold * delta_msec; 6228 6229 DPRINTF(sc, IWN_DEBUG_STATE, 6230 "%s: time delta: %d; cck=%d, ofdm=%d, ht=%d, total=%d, thresh=%d\n", 6231 __func__, 6232 delta_msec, 6233 delta_cck, 6234 delta_ofdm, 6235 delta_ht, 6236 (delta_msec + delta_cck + delta_ofdm + delta_ht), 6237 thresh); 6238 6239 /* 6240 * If we need a retune, then schedule a single channel scan 6241 * to a channel that isn't the currently active one! 6242 * 6243 * The math from linux iwlwifi: 6244 * 6245 * if ((delta * 100 / msecs) > threshold) 6246 */ 6247 if (thresh > 0 && (delta_cck + delta_ofdm + delta_ht) * 100 > thresh) { 6248 DPRINTF(sc, IWN_DEBUG_ANY, 6249 "%s: PLCP error threshold raw (%d) comparison (%d) " 6250 "over limit (%d); retune!\n", 6251 __func__, 6252 (delta_cck + delta_ofdm + delta_ht), 6253 (delta_cck + delta_ofdm + delta_ht) * 100, 6254 thresh); 6255 } 6256 } 6257 6258 /* 6259 * Set STA mode power saving level (between 0 and 5). 6260 * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving. 6261 */ 6262 static int 6263 iwn_set_pslevel(struct iwn_softc *sc, int dtim, int level, int async) 6264 { 6265 struct iwn_pmgt_cmd cmd; 6266 const struct iwn_pmgt *pmgt; 6267 uint32_t max, skip_dtim; 6268 uint32_t reg; 6269 int i; 6270 6271 DPRINTF(sc, IWN_DEBUG_PWRSAVE, 6272 "%s: dtim=%d, level=%d, async=%d\n", 6273 __func__, 6274 dtim, 6275 level, 6276 async); 6277 6278 /* Select which PS parameters to use. */ 6279 if (dtim <= 2) 6280 pmgt = &iwn_pmgt[0][level]; 6281 else if (dtim <= 10) 6282 pmgt = &iwn_pmgt[1][level]; 6283 else 6284 pmgt = &iwn_pmgt[2][level]; 6285 6286 memset(&cmd, 0, sizeof cmd); 6287 if (level != 0) /* not CAM */ 6288 cmd.flags |= htole16(IWN_PS_ALLOW_SLEEP); 6289 if (level == 5) 6290 cmd.flags |= htole16(IWN_PS_FAST_PD); 6291 /* Retrieve PCIe Active State Power Management (ASPM). */ 6292 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); 6293 if (!(reg & 0x1)) /* L0s Entry disabled. */ 6294 cmd.flags |= htole16(IWN_PS_PCI_PMGT); 6295 cmd.rxtimeout = htole32(pmgt->rxtimeout * 1024); 6296 cmd.txtimeout = htole32(pmgt->txtimeout * 1024); 6297 6298 if (dtim == 0) { 6299 dtim = 1; 6300 skip_dtim = 0; 6301 } else 6302 skip_dtim = pmgt->skip_dtim; 6303 if (skip_dtim != 0) { 6304 cmd.flags |= htole16(IWN_PS_SLEEP_OVER_DTIM); 6305 max = pmgt->intval[4]; 6306 if (max == (uint32_t)-1) 6307 max = dtim * (skip_dtim + 1); 6308 else if (max > dtim) 6309 max = (max / dtim) * dtim; 6310 } else 6311 max = dtim; 6312 for (i = 0; i < 5; i++) 6313 cmd.intval[i] = htole32(MIN(max, pmgt->intval[i])); 6314 6315 DPRINTF(sc, IWN_DEBUG_RESET, "setting power saving level to %d\n", 6316 level); 6317 return iwn_cmd(sc, IWN_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async); 6318 } 6319 6320 static int 6321 iwn_send_btcoex(struct iwn_softc *sc) 6322 { 6323 struct iwn_bluetooth cmd; 6324 6325 memset(&cmd, 0, sizeof cmd); 6326 cmd.flags = IWN_BT_COEX_CHAN_ANN | IWN_BT_COEX_BT_PRIO; 6327 cmd.lead_time = IWN_BT_LEAD_TIME_DEF; 6328 cmd.max_kill = IWN_BT_MAX_KILL_DEF; 6329 DPRINTF(sc, IWN_DEBUG_RESET, "%s: configuring bluetooth coexistence\n", 6330 __func__); 6331 return iwn_cmd(sc, IWN_CMD_BT_COEX, &cmd, sizeof(cmd), 0); 6332 } 6333 6334 static int 6335 iwn_send_advanced_btcoex(struct iwn_softc *sc) 6336 { 6337 static const uint32_t btcoex_3wire[12] = { 6338 0xaaaaaaaa, 0xaaaaaaaa, 0xaeaaaaaa, 0xaaaaaaaa, 6339 0xcc00ff28, 0x0000aaaa, 0xcc00aaaa, 0x0000aaaa, 6340 0xc0004000, 0x00004000, 0xf0005000, 0xf0005000, 6341 }; 6342 struct iwn6000_btcoex_config btconfig; 6343 struct iwn2000_btcoex_config btconfig2k; 6344 struct iwn_btcoex_priotable btprio; 6345 struct iwn_btcoex_prot btprot; 6346 int error, i; 6347 uint8_t flags; 6348 6349 memset(&btconfig, 0, sizeof btconfig); 6350 memset(&btconfig2k, 0, sizeof btconfig2k); 6351 6352 flags = IWN_BT_FLAG_COEX6000_MODE_3W << 6353 IWN_BT_FLAG_COEX6000_MODE_SHIFT; // Done as is in linux kernel 3.2 6354 6355 if (sc->base_params->bt_sco_disable) 6356 flags &= ~IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6357 else 6358 flags |= IWN_BT_FLAG_SYNC_2_BT_DISABLE; 6359 6360 flags |= IWN_BT_FLAG_COEX6000_CHAN_INHIBITION; 6361 6362 /* Default flags result is 145 as old value */ 6363 6364 /* 6365 * Flags value has to be review. Values must change if we 6366 * which to disable it 6367 */ 6368 if (sc->base_params->bt_session_2) { 6369 btconfig2k.flags = flags; 6370 btconfig2k.max_kill = 5; 6371 btconfig2k.bt3_t7_timer = 1; 6372 btconfig2k.kill_ack = htole32(0xffff0000); 6373 btconfig2k.kill_cts = htole32(0xffff0000); 6374 btconfig2k.sample_time = 2; 6375 btconfig2k.bt3_t2_timer = 0xc; 6376 6377 for (i = 0; i < 12; i++) 6378 btconfig2k.lookup_table[i] = htole32(btcoex_3wire[i]); 6379 btconfig2k.valid = htole16(0xff); 6380 btconfig2k.prio_boost = htole32(0xf0); 6381 DPRINTF(sc, IWN_DEBUG_RESET, 6382 "%s: configuring advanced bluetooth coexistence" 6383 " session 2, flags : 0x%x\n", 6384 __func__, 6385 flags); 6386 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig2k, 6387 sizeof(btconfig2k), 1); 6388 } else { 6389 btconfig.flags = flags; 6390 btconfig.max_kill = 5; 6391 btconfig.bt3_t7_timer = 1; 6392 btconfig.kill_ack = htole32(0xffff0000); 6393 btconfig.kill_cts = htole32(0xffff0000); 6394 btconfig.sample_time = 2; 6395 btconfig.bt3_t2_timer = 0xc; 6396 6397 for (i = 0; i < 12; i++) 6398 btconfig.lookup_table[i] = htole32(btcoex_3wire[i]); 6399 btconfig.valid = htole16(0xff); 6400 btconfig.prio_boost = 0xf0; 6401 DPRINTF(sc, IWN_DEBUG_RESET, 6402 "%s: configuring advanced bluetooth coexistence," 6403 " flags : 0x%x\n", 6404 __func__, 6405 flags); 6406 error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig, 6407 sizeof(btconfig), 1); 6408 } 6409 6410 if (error != 0) 6411 return error; 6412 6413 memset(&btprio, 0, sizeof btprio); 6414 btprio.calib_init1 = 0x6; 6415 btprio.calib_init2 = 0x7; 6416 btprio.calib_periodic_low1 = 0x2; 6417 btprio.calib_periodic_low2 = 0x3; 6418 btprio.calib_periodic_high1 = 0x4; 6419 btprio.calib_periodic_high2 = 0x5; 6420 btprio.dtim = 0x6; 6421 btprio.scan52 = 0x8; 6422 btprio.scan24 = 0xa; 6423 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PRIOTABLE, &btprio, sizeof(btprio), 6424 1); 6425 if (error != 0) 6426 return error; 6427 6428 /* Force BT state machine change. */ 6429 memset(&btprot, 0, sizeof btprot); 6430 btprot.open = 1; 6431 btprot.type = 1; 6432 error = iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6433 if (error != 0) 6434 return error; 6435 btprot.open = 0; 6436 return iwn_cmd(sc, IWN_CMD_BT_COEX_PROT, &btprot, sizeof(btprot), 1); 6437 } 6438 6439 static int 6440 iwn5000_runtime_calib(struct iwn_softc *sc) 6441 { 6442 struct iwn5000_calib_config cmd; 6443 6444 memset(&cmd, 0, sizeof cmd); 6445 cmd.ucode.once.enable = 0xffffffff; 6446 cmd.ucode.once.start = IWN5000_CALIB_DC; 6447 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 6448 "%s: configuring runtime calibration\n", __func__); 6449 return iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof(cmd), 0); 6450 } 6451 6452 static uint32_t 6453 iwn_get_rxon_ht_flags(struct iwn_softc *sc, struct ieee80211_channel *c) 6454 { 6455 struct ieee80211com *ic = &sc->sc_ic; 6456 uint32_t htflags = 0; 6457 6458 if (! IEEE80211_IS_CHAN_HT(c)) 6459 return (0); 6460 6461 htflags |= IWN_RXON_HT_PROTMODE(ic->ic_curhtprotmode); 6462 6463 if (IEEE80211_IS_CHAN_HT40(c)) { 6464 switch (ic->ic_curhtprotmode) { 6465 case IEEE80211_HTINFO_OPMODE_HT20PR: 6466 htflags |= IWN_RXON_HT_MODEPURE40; 6467 break; 6468 default: 6469 htflags |= IWN_RXON_HT_MODEMIXED; 6470 break; 6471 } 6472 } 6473 if (IEEE80211_IS_CHAN_HT40D(c)) 6474 htflags |= IWN_RXON_HT_HT40MINUS; 6475 6476 return (htflags); 6477 } 6478 6479 static int 6480 iwn_config(struct iwn_softc *sc) 6481 { 6482 struct iwn_ops *ops = &sc->ops; 6483 struct ieee80211com *ic = &sc->sc_ic; 6484 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 6485 const uint8_t *macaddr; 6486 uint32_t txmask; 6487 uint16_t rxchain; 6488 int error; 6489 6490 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6491 6492 if ((sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) 6493 && (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)) { 6494 device_printf(sc->sc_dev,"%s: temp_offset and temp_offsetv2 are" 6495 " exclusive each together. Review NIC config file. Conf" 6496 " : 0x%08x Flags : 0x%08x \n", __func__, 6497 sc->base_params->calib_need, 6498 (IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET | 6499 IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2)); 6500 return (EINVAL); 6501 } 6502 6503 /* Compute temperature calib if needed. Will be send by send calib */ 6504 if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSET) { 6505 error = iwn5000_temp_offset_calib(sc); 6506 if (error != 0) { 6507 device_printf(sc->sc_dev, 6508 "%s: could not set temperature offset\n", __func__); 6509 return (error); 6510 } 6511 } else if (sc->base_params->calib_need & IWN_FLG_NEED_PHY_CALIB_TEMP_OFFSETv2) { 6512 error = iwn5000_temp_offset_calibv2(sc); 6513 if (error != 0) { 6514 device_printf(sc->sc_dev, 6515 "%s: could not compute temperature offset v2\n", 6516 __func__); 6517 return (error); 6518 } 6519 } 6520 6521 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 6522 /* Configure runtime DC calibration. */ 6523 error = iwn5000_runtime_calib(sc); 6524 if (error != 0) { 6525 device_printf(sc->sc_dev, 6526 "%s: could not configure runtime calibration\n", 6527 __func__); 6528 return error; 6529 } 6530 } 6531 6532 /* Configure valid TX chains for >=5000 Series. */ 6533 if (sc->hw_type != IWN_HW_REV_TYPE_4965 && 6534 IWN_UCODE_API(sc->ucode_rev) > 1) { 6535 txmask = htole32(sc->txchainmask); 6536 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6537 "%s: configuring valid TX chains 0x%x\n", __func__, txmask); 6538 error = iwn_cmd(sc, IWN5000_CMD_TX_ANT_CONFIG, &txmask, 6539 sizeof txmask, 0); 6540 if (error != 0) { 6541 device_printf(sc->sc_dev, 6542 "%s: could not configure valid TX chains, " 6543 "error %d\n", __func__, error); 6544 return error; 6545 } 6546 } 6547 6548 /* Configure bluetooth coexistence. */ 6549 error = 0; 6550 6551 /* Configure bluetooth coexistence if needed. */ 6552 if (sc->base_params->bt_mode == IWN_BT_ADVANCED) 6553 error = iwn_send_advanced_btcoex(sc); 6554 if (sc->base_params->bt_mode == IWN_BT_SIMPLE) 6555 error = iwn_send_btcoex(sc); 6556 6557 if (error != 0) { 6558 device_printf(sc->sc_dev, 6559 "%s: could not configure bluetooth coexistence, error %d\n", 6560 __func__, error); 6561 return error; 6562 } 6563 6564 /* Set mode, channel, RX filter and enable RX. */ 6565 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6566 memset(sc->rxon, 0, sizeof (struct iwn_rxon)); 6567 macaddr = vap ? vap->iv_myaddr : ic->ic_macaddr; 6568 IEEE80211_ADDR_COPY(sc->rxon->myaddr, macaddr); 6569 IEEE80211_ADDR_COPY(sc->rxon->wlap, macaddr); 6570 sc->rxon->chan = ieee80211_chan2ieee(ic, ic->ic_curchan); 6571 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 6572 if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 6573 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 6574 switch (ic->ic_opmode) { 6575 case IEEE80211_M_STA: 6576 sc->rxon->mode = IWN_MODE_STA; 6577 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST); 6578 break; 6579 case IEEE80211_M_MONITOR: 6580 sc->rxon->mode = IWN_MODE_MONITOR; 6581 sc->rxon->filter = htole32(IWN_FILTER_MULTICAST | 6582 IWN_FILTER_CTL | IWN_FILTER_PROMISC); 6583 break; 6584 default: 6585 /* Should not get there. */ 6586 break; 6587 } 6588 sc->rxon->cck_mask = 0x0f; /* not yet negotiated */ 6589 sc->rxon->ofdm_mask = 0xff; /* not yet negotiated */ 6590 sc->rxon->ht_single_mask = 0xff; 6591 sc->rxon->ht_dual_mask = 0xff; 6592 sc->rxon->ht_triple_mask = 0xff; 6593 /* 6594 * In active association mode, ensure that 6595 * all the receive chains are enabled. 6596 * 6597 * Since we're not yet doing SMPS, don't allow the 6598 * number of idle RX chains to be less than the active 6599 * number. 6600 */ 6601 rxchain = 6602 IWN_RXCHAIN_VALID(sc->rxchainmask) | 6603 IWN_RXCHAIN_MIMO_COUNT(sc->nrxchains) | 6604 IWN_RXCHAIN_IDLE_COUNT(sc->nrxchains); 6605 sc->rxon->rxchain = htole16(rxchain); 6606 DPRINTF(sc, IWN_DEBUG_RESET | IWN_DEBUG_XMIT, 6607 "%s: rxchainmask=0x%x, nrxchains=%d\n", 6608 __func__, 6609 sc->rxchainmask, 6610 sc->nrxchains); 6611 6612 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan)); 6613 6614 DPRINTF(sc, IWN_DEBUG_RESET, 6615 "%s: setting configuration; flags=0x%08x\n", 6616 __func__, le32toh(sc->rxon->flags)); 6617 if (sc->sc_is_scanning) 6618 device_printf(sc->sc_dev, 6619 "%s: is_scanning set, before RXON\n", 6620 __func__); 6621 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 0); 6622 if (error != 0) { 6623 device_printf(sc->sc_dev, "%s: RXON command failed\n", 6624 __func__); 6625 return error; 6626 } 6627 6628 if ((error = iwn_add_broadcast_node(sc, 0)) != 0) { 6629 device_printf(sc->sc_dev, "%s: could not add broadcast node\n", 6630 __func__); 6631 return error; 6632 } 6633 6634 /* Configuration has changed, set TX power accordingly. */ 6635 if ((error = ops->set_txpower(sc, ic->ic_curchan, 0)) != 0) { 6636 device_printf(sc->sc_dev, "%s: could not set TX power\n", 6637 __func__); 6638 return error; 6639 } 6640 6641 if ((error = iwn_set_critical_temp(sc)) != 0) { 6642 device_printf(sc->sc_dev, 6643 "%s: could not set critical temperature\n", __func__); 6644 return error; 6645 } 6646 6647 /* Set power saving level to CAM during initialization. */ 6648 if ((error = iwn_set_pslevel(sc, 0, 0, 0)) != 0) { 6649 device_printf(sc->sc_dev, 6650 "%s: could not set power saving level\n", __func__); 6651 return error; 6652 } 6653 6654 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6655 6656 return 0; 6657 } 6658 6659 static uint16_t 6660 iwn_get_active_dwell_time(struct iwn_softc *sc, 6661 struct ieee80211_channel *c, uint8_t n_probes) 6662 { 6663 /* No channel? Default to 2GHz settings */ 6664 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 6665 return (IWN_ACTIVE_DWELL_TIME_2GHZ + 6666 IWN_ACTIVE_DWELL_FACTOR_2GHZ * (n_probes + 1)); 6667 } 6668 6669 /* 5GHz dwell time */ 6670 return (IWN_ACTIVE_DWELL_TIME_5GHZ + 6671 IWN_ACTIVE_DWELL_FACTOR_5GHZ * (n_probes + 1)); 6672 } 6673 6674 /* 6675 * Limit the total dwell time to 85% of the beacon interval. 6676 * 6677 * Returns the dwell time in milliseconds. 6678 */ 6679 static uint16_t 6680 iwn_limit_dwell(struct iwn_softc *sc, uint16_t dwell_time) 6681 { 6682 struct ieee80211com *ic = &sc->sc_ic; 6683 struct ieee80211vap *vap = NULL; 6684 int bintval = 0; 6685 6686 /* bintval is in TU (1.024mS) */ 6687 if (! TAILQ_EMPTY(&ic->ic_vaps)) { 6688 vap = TAILQ_FIRST(&ic->ic_vaps); 6689 bintval = vap->iv_bss->ni_intval; 6690 } 6691 6692 /* 6693 * If it's non-zero, we should calculate the minimum of 6694 * it and the DWELL_BASE. 6695 * 6696 * XXX Yes, the math should take into account that bintval 6697 * is 1.024mS, not 1mS.. 6698 */ 6699 if (bintval > 0) { 6700 DPRINTF(sc, IWN_DEBUG_SCAN, 6701 "%s: bintval=%d\n", 6702 __func__, 6703 bintval); 6704 return (MIN(IWN_PASSIVE_DWELL_BASE, ((bintval * 85) / 100))); 6705 } 6706 6707 /* No association context? Default */ 6708 return (IWN_PASSIVE_DWELL_BASE); 6709 } 6710 6711 static uint16_t 6712 iwn_get_passive_dwell_time(struct iwn_softc *sc, struct ieee80211_channel *c) 6713 { 6714 uint16_t passive; 6715 6716 if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { 6717 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_2GHZ; 6718 } else { 6719 passive = IWN_PASSIVE_DWELL_BASE + IWN_PASSIVE_DWELL_TIME_5GHZ; 6720 } 6721 6722 /* Clamp to the beacon interval if we're associated */ 6723 return (iwn_limit_dwell(sc, passive)); 6724 } 6725 6726 static int 6727 iwn_scan(struct iwn_softc *sc, struct ieee80211vap *vap, 6728 struct ieee80211_scan_state *ss, struct ieee80211_channel *c) 6729 { 6730 struct ieee80211com *ic = &sc->sc_ic; 6731 struct ieee80211_node *ni = vap->iv_bss; 6732 struct iwn_scan_hdr *hdr; 6733 struct iwn_cmd_data *tx; 6734 struct iwn_scan_essid *essid; 6735 struct iwn_scan_chan *chan; 6736 struct ieee80211_frame *wh; 6737 struct ieee80211_rateset *rs; 6738 uint8_t *buf, *frm; 6739 uint16_t rxchain; 6740 uint8_t txant; 6741 int buflen, error; 6742 int is_active; 6743 uint16_t dwell_active, dwell_passive; 6744 uint32_t extra, scan_service_time; 6745 6746 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6747 6748 /* 6749 * We are absolutely not allowed to send a scan command when another 6750 * scan command is pending. 6751 */ 6752 if (sc->sc_is_scanning) { 6753 device_printf(sc->sc_dev, "%s: called whilst scanning!\n", 6754 __func__); 6755 return (EAGAIN); 6756 } 6757 6758 /* Assign the scan channel */ 6759 c = ic->ic_curchan; 6760 6761 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6762 buf = malloc(IWN_SCAN_MAXSZ, M_DEVBUF, M_NOWAIT | M_ZERO); 6763 if (buf == NULL) { 6764 device_printf(sc->sc_dev, 6765 "%s: could not allocate buffer for scan command\n", 6766 __func__); 6767 return ENOMEM; 6768 } 6769 hdr = (struct iwn_scan_hdr *)buf; 6770 /* 6771 * Move to the next channel if no frames are received within 10ms 6772 * after sending the probe request. 6773 */ 6774 hdr->quiet_time = htole16(10); /* timeout in milliseconds */ 6775 hdr->quiet_threshold = htole16(1); /* min # of packets */ 6776 /* 6777 * Max needs to be greater than active and passive and quiet! 6778 * It's also in microseconds! 6779 */ 6780 hdr->max_svc = htole32(250 * 1024); 6781 6782 /* 6783 * Reset scan: interval=100 6784 * Normal scan: interval=becaon interval 6785 * suspend_time: 100 (TU) 6786 * 6787 */ 6788 extra = (100 /* suspend_time */ / 100 /* beacon interval */) << 22; 6789 //scan_service_time = extra | ((100 /* susp */ % 100 /* int */) * 1024); 6790 scan_service_time = (4 << 22) | (100 * 1024); /* Hardcode for now! */ 6791 hdr->pause_svc = htole32(scan_service_time); 6792 6793 /* Select antennas for scanning. */ 6794 rxchain = 6795 IWN_RXCHAIN_VALID(sc->rxchainmask) | 6796 IWN_RXCHAIN_FORCE_MIMO_SEL(sc->rxchainmask) | 6797 IWN_RXCHAIN_DRIVER_FORCE; 6798 if (IEEE80211_IS_CHAN_A(c) && 6799 sc->hw_type == IWN_HW_REV_TYPE_4965) { 6800 /* Ant A must be avoided in 5GHz because of an HW bug. */ 6801 rxchain |= IWN_RXCHAIN_FORCE_SEL(IWN_ANT_B); 6802 } else /* Use all available RX antennas. */ 6803 rxchain |= IWN_RXCHAIN_FORCE_SEL(sc->rxchainmask); 6804 hdr->rxchain = htole16(rxchain); 6805 hdr->filter = htole32(IWN_FILTER_MULTICAST | IWN_FILTER_BEACON); 6806 6807 tx = (struct iwn_cmd_data *)(hdr + 1); 6808 tx->flags = htole32(IWN_TX_AUTO_SEQ); 6809 tx->id = sc->broadcast_id; 6810 tx->lifetime = htole32(IWN_LIFETIME_INFINITE); 6811 6812 if (IEEE80211_IS_CHAN_5GHZ(c)) { 6813 /* Send probe requests at 6Mbps. */ 6814 tx->rate = htole32(0xd); 6815 rs = &ic->ic_sup_rates[IEEE80211_MODE_11A]; 6816 } else { 6817 hdr->flags = htole32(IWN_RXON_24GHZ | IWN_RXON_AUTO); 6818 if (sc->hw_type == IWN_HW_REV_TYPE_4965 && 6819 sc->rxon->associd && sc->rxon->chan > 14) 6820 tx->rate = htole32(0xd); 6821 else { 6822 /* Send probe requests at 1Mbps. */ 6823 tx->rate = htole32(10 | IWN_RFLAG_CCK); 6824 } 6825 rs = &ic->ic_sup_rates[IEEE80211_MODE_11G]; 6826 } 6827 /* Use the first valid TX antenna. */ 6828 txant = IWN_LSB(sc->txchainmask); 6829 tx->rate |= htole32(IWN_RFLAG_ANT(txant)); 6830 6831 /* 6832 * Only do active scanning if we're announcing a probe request 6833 * for a given SSID (or more, if we ever add it to the driver.) 6834 */ 6835 is_active = 0; 6836 6837 /* 6838 * If we're scanning for a specific SSID, add it to the command. 6839 * 6840 * XXX maybe look at adding support for scanning multiple SSIDs? 6841 */ 6842 essid = (struct iwn_scan_essid *)(tx + 1); 6843 if (ss != NULL) { 6844 if (ss->ss_ssid[0].len != 0) { 6845 essid[0].id = IEEE80211_ELEMID_SSID; 6846 essid[0].len = ss->ss_ssid[0].len; 6847 memcpy(essid[0].data, ss->ss_ssid[0].ssid, ss->ss_ssid[0].len); 6848 } 6849 6850 DPRINTF(sc, IWN_DEBUG_SCAN, "%s: ssid_len=%d, ssid=%*s\n", 6851 __func__, 6852 ss->ss_ssid[0].len, 6853 ss->ss_ssid[0].len, 6854 ss->ss_ssid[0].ssid); 6855 6856 if (ss->ss_nssid > 0) 6857 is_active = 1; 6858 } 6859 6860 /* 6861 * Build a probe request frame. Most of the following code is a 6862 * copy & paste of what is done in net80211. 6863 */ 6864 wh = (struct ieee80211_frame *)(essid + 20); 6865 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 6866 IEEE80211_FC0_SUBTYPE_PROBE_REQ; 6867 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 6868 IEEE80211_ADDR_COPY(wh->i_addr1, vap->iv_ifp->if_broadcastaddr); 6869 IEEE80211_ADDR_COPY(wh->i_addr2, IF_LLADDR(vap->iv_ifp)); 6870 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_ifp->if_broadcastaddr); 6871 *(uint16_t *)&wh->i_dur[0] = 0; /* filled by HW */ 6872 *(uint16_t *)&wh->i_seq[0] = 0; /* filled by HW */ 6873 6874 frm = (uint8_t *)(wh + 1); 6875 frm = ieee80211_add_ssid(frm, NULL, 0); 6876 frm = ieee80211_add_rates(frm, rs); 6877 if (rs->rs_nrates > IEEE80211_RATE_SIZE) 6878 frm = ieee80211_add_xrates(frm, rs); 6879 if (ic->ic_htcaps & IEEE80211_HTC_HT) 6880 frm = ieee80211_add_htcap(frm, ni); 6881 6882 /* Set length of probe request. */ 6883 tx->len = htole16(frm - (uint8_t *)wh); 6884 6885 /* 6886 * If active scanning is requested but a certain channel is 6887 * marked passive, we can do active scanning if we detect 6888 * transmissions. 6889 * 6890 * There is an issue with some firmware versions that triggers 6891 * a sysassert on a "good CRC threshold" of zero (== disabled), 6892 * on a radar channel even though this means that we should NOT 6893 * send probes. 6894 * 6895 * The "good CRC threshold" is the number of frames that we 6896 * need to receive during our dwell time on a channel before 6897 * sending out probes -- setting this to a huge value will 6898 * mean we never reach it, but at the same time work around 6899 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER 6900 * here instead of IWL_GOOD_CRC_TH_DISABLED. 6901 * 6902 * This was fixed in later versions along with some other 6903 * scan changes, and the threshold behaves as a flag in those 6904 * versions. 6905 */ 6906 6907 /* 6908 * If we're doing active scanning, set the crc_threshold 6909 * to a suitable value. This is different to active veruss 6910 * passive scanning depending upon the channel flags; the 6911 * firmware will obey that particular check for us. 6912 */ 6913 if (sc->tlv_feature_flags & IWN_UCODE_TLV_FLAGS_NEWSCAN) 6914 hdr->crc_threshold = is_active ? 6915 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_DISABLED; 6916 else 6917 hdr->crc_threshold = is_active ? 6918 IWN_GOOD_CRC_TH_DEFAULT : IWN_GOOD_CRC_TH_NEVER; 6919 6920 chan = (struct iwn_scan_chan *)frm; 6921 chan->chan = htole16(ieee80211_chan2ieee(ic, c)); 6922 chan->flags = 0; 6923 if (ss->ss_nssid > 0) 6924 chan->flags |= htole32(IWN_CHAN_NPBREQS(1)); 6925 chan->dsp_gain = 0x6e; 6926 6927 /* 6928 * Set the passive/active flag depending upon the channel mode. 6929 * XXX TODO: take the is_active flag into account as well? 6930 */ 6931 if (c->ic_flags & IEEE80211_CHAN_PASSIVE) 6932 chan->flags |= htole32(IWN_CHAN_PASSIVE); 6933 else 6934 chan->flags |= htole32(IWN_CHAN_ACTIVE); 6935 6936 /* 6937 * Calculate the active/passive dwell times. 6938 */ 6939 6940 dwell_active = iwn_get_active_dwell_time(sc, c, ss->ss_nssid); 6941 dwell_passive = iwn_get_passive_dwell_time(sc, c); 6942 6943 /* Make sure they're valid */ 6944 if (dwell_passive <= dwell_active) 6945 dwell_passive = dwell_active + 1; 6946 6947 chan->active = htole16(dwell_active); 6948 chan->passive = htole16(dwell_passive); 6949 6950 if (IEEE80211_IS_CHAN_5GHZ(c)) 6951 chan->rf_gain = 0x3b; 6952 else 6953 chan->rf_gain = 0x28; 6954 6955 DPRINTF(sc, IWN_DEBUG_STATE, 6956 "%s: chan %u flags 0x%x rf_gain 0x%x " 6957 "dsp_gain 0x%x active %d passive %d scan_svc_time %d crc 0x%x " 6958 "isactive=%d numssid=%d\n", __func__, 6959 chan->chan, chan->flags, chan->rf_gain, chan->dsp_gain, 6960 dwell_active, dwell_passive, scan_service_time, 6961 hdr->crc_threshold, is_active, ss->ss_nssid); 6962 6963 hdr->nchan++; 6964 chan++; 6965 buflen = (uint8_t *)chan - buf; 6966 hdr->len = htole16(buflen); 6967 6968 if (sc->sc_is_scanning) { 6969 device_printf(sc->sc_dev, 6970 "%s: called with is_scanning set!\n", 6971 __func__); 6972 } 6973 sc->sc_is_scanning = 1; 6974 6975 DPRINTF(sc, IWN_DEBUG_STATE, "sending scan command nchan=%d\n", 6976 hdr->nchan); 6977 error = iwn_cmd(sc, IWN_CMD_SCAN, buf, buflen, 1); 6978 free(buf, M_DEVBUF); 6979 6980 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 6981 6982 return error; 6983 } 6984 6985 static int 6986 iwn_auth(struct iwn_softc *sc, struct ieee80211vap *vap) 6987 { 6988 struct iwn_ops *ops = &sc->ops; 6989 struct ieee80211com *ic = &sc->sc_ic; 6990 struct ieee80211_node *ni = vap->iv_bss; 6991 int error; 6992 6993 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 6994 6995 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 6996 /* Update adapter configuration. */ 6997 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 6998 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 6999 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7000 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7001 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7002 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7003 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7004 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7005 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7006 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7007 sc->rxon->cck_mask = 0; 7008 sc->rxon->ofdm_mask = 0x15; 7009 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7010 sc->rxon->cck_mask = 0x03; 7011 sc->rxon->ofdm_mask = 0; 7012 } else { 7013 /* Assume 802.11b/g. */ 7014 sc->rxon->cck_mask = 0x03; 7015 sc->rxon->ofdm_mask = 0x15; 7016 } 7017 7018 /* try HT */ 7019 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ic->ic_curchan)); 7020 7021 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x cck %x ofdm %x\n", 7022 sc->rxon->chan, sc->rxon->flags, sc->rxon->cck_mask, 7023 sc->rxon->ofdm_mask); 7024 if (sc->sc_is_scanning) 7025 device_printf(sc->sc_dev, 7026 "%s: is_scanning set, before RXON\n", 7027 __func__); 7028 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 7029 if (error != 0) { 7030 device_printf(sc->sc_dev, "%s: RXON command failed, error %d\n", 7031 __func__, error); 7032 return error; 7033 } 7034 7035 /* Configuration has changed, set TX power accordingly. */ 7036 if ((error = ops->set_txpower(sc, ni->ni_chan, 1)) != 0) { 7037 device_printf(sc->sc_dev, 7038 "%s: could not set TX power, error %d\n", __func__, error); 7039 return error; 7040 } 7041 /* 7042 * Reconfiguring RXON clears the firmware nodes table so we must 7043 * add the broadcast node again. 7044 */ 7045 if ((error = iwn_add_broadcast_node(sc, 1)) != 0) { 7046 device_printf(sc->sc_dev, 7047 "%s: could not add broadcast node, error %d\n", __func__, 7048 error); 7049 return error; 7050 } 7051 7052 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7053 7054 return 0; 7055 } 7056 7057 static int 7058 iwn_run(struct iwn_softc *sc, struct ieee80211vap *vap) 7059 { 7060 struct iwn_ops *ops = &sc->ops; 7061 struct ieee80211com *ic = &sc->sc_ic; 7062 struct ieee80211_node *ni = vap->iv_bss; 7063 struct iwn_node_info node; 7064 int error; 7065 7066 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7067 7068 sc->rxon = &sc->rx_on[IWN_RXON_BSS_CTX]; 7069 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 7070 /* Link LED blinks while monitoring. */ 7071 iwn_set_led(sc, IWN_LED_LINK, 5, 5); 7072 return 0; 7073 } 7074 if ((error = iwn_set_timing(sc, ni)) != 0) { 7075 device_printf(sc->sc_dev, 7076 "%s: could not set timing, error %d\n", __func__, error); 7077 return error; 7078 } 7079 7080 /* Update adapter configuration. */ 7081 IEEE80211_ADDR_COPY(sc->rxon->bssid, ni->ni_bssid); 7082 sc->rxon->associd = htole16(IEEE80211_AID(ni->ni_associd)); 7083 sc->rxon->chan = ieee80211_chan2ieee(ic, ni->ni_chan); 7084 sc->rxon->flags = htole32(IWN_RXON_TSF | IWN_RXON_CTS_TO_SELF); 7085 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 7086 sc->rxon->flags |= htole32(IWN_RXON_AUTO | IWN_RXON_24GHZ); 7087 if (ic->ic_flags & IEEE80211_F_SHSLOT) 7088 sc->rxon->flags |= htole32(IWN_RXON_SHSLOT); 7089 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 7090 sc->rxon->flags |= htole32(IWN_RXON_SHPREAMBLE); 7091 if (IEEE80211_IS_CHAN_A(ni->ni_chan)) { 7092 sc->rxon->cck_mask = 0; 7093 sc->rxon->ofdm_mask = 0x15; 7094 } else if (IEEE80211_IS_CHAN_B(ni->ni_chan)) { 7095 sc->rxon->cck_mask = 0x03; 7096 sc->rxon->ofdm_mask = 0; 7097 } else { 7098 /* Assume 802.11b/g. */ 7099 sc->rxon->cck_mask = 0x0f; 7100 sc->rxon->ofdm_mask = 0x15; 7101 } 7102 /* try HT */ 7103 sc->rxon->flags |= htole32(iwn_get_rxon_ht_flags(sc, ni->ni_chan)); 7104 sc->rxon->filter |= htole32(IWN_FILTER_BSS); 7105 DPRINTF(sc, IWN_DEBUG_STATE, "rxon chan %d flags %x, curhtprotmode=%d\n", 7106 sc->rxon->chan, le32toh(sc->rxon->flags), ic->ic_curhtprotmode); 7107 if (sc->sc_is_scanning) 7108 device_printf(sc->sc_dev, 7109 "%s: is_scanning set, before RXON\n", 7110 __func__); 7111 error = iwn_cmd(sc, IWN_CMD_RXON, sc->rxon, sc->rxonsz, 1); 7112 if (error != 0) { 7113 device_printf(sc->sc_dev, 7114 "%s: could not update configuration, error %d\n", __func__, 7115 error); 7116 return error; 7117 } 7118 7119 /* Configuration has changed, set TX power accordingly. */ 7120 if ((error = ops->set_txpower(sc, ni->ni_chan, 1)) != 0) { 7121 device_printf(sc->sc_dev, 7122 "%s: could not set TX power, error %d\n", __func__, error); 7123 return error; 7124 } 7125 7126 /* Fake a join to initialize the TX rate. */ 7127 ((struct iwn_node *)ni)->id = IWN_ID_BSS; 7128 iwn_newassoc(ni, 1); 7129 7130 /* Add BSS node. */ 7131 memset(&node, 0, sizeof node); 7132 IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); 7133 node.id = IWN_ID_BSS; 7134 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 7135 switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) { 7136 case IEEE80211_HTCAP_SMPS_ENA: 7137 node.htflags |= htole32(IWN_SMPS_MIMO_DIS); 7138 break; 7139 case IEEE80211_HTCAP_SMPS_DYNAMIC: 7140 node.htflags |= htole32(IWN_SMPS_MIMO_PROT); 7141 break; 7142 } 7143 node.htflags |= htole32(IWN_AMDPU_SIZE_FACTOR(3) | 7144 IWN_AMDPU_DENSITY(5)); /* 4us */ 7145 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) 7146 node.htflags |= htole32(IWN_NODE_HT40); 7147 } 7148 DPRINTF(sc, IWN_DEBUG_STATE, "%s: adding BSS node\n", __func__); 7149 error = ops->add_node(sc, &node, 1); 7150 if (error != 0) { 7151 device_printf(sc->sc_dev, 7152 "%s: could not add BSS node, error %d\n", __func__, error); 7153 return error; 7154 } 7155 DPRINTF(sc, IWN_DEBUG_STATE, "%s: setting link quality for node %d\n", 7156 __func__, node.id); 7157 if ((error = iwn_set_link_quality(sc, ni)) != 0) { 7158 device_printf(sc->sc_dev, 7159 "%s: could not setup link quality for node %d, error %d\n", 7160 __func__, node.id, error); 7161 return error; 7162 } 7163 7164 if ((error = iwn_init_sensitivity(sc)) != 0) { 7165 device_printf(sc->sc_dev, 7166 "%s: could not set sensitivity, error %d\n", __func__, 7167 error); 7168 return error; 7169 } 7170 /* Start periodic calibration timer. */ 7171 sc->calib.state = IWN_CALIB_STATE_ASSOC; 7172 sc->calib_cnt = 0; 7173 callout_reset(&sc->calib_to, msecs_to_ticks(500), iwn_calib_timeout, 7174 sc); 7175 7176 /* Link LED always on while associated. */ 7177 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 7178 7179 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7180 7181 return 0; 7182 } 7183 7184 /* 7185 * This function is called by upper layer when an ADDBA request is received 7186 * from another STA and before the ADDBA response is sent. 7187 */ 7188 static int 7189 iwn_ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, 7190 int baparamset, int batimeout, int baseqctl) 7191 { 7192 #define MS(_v, _f) (((_v) & _f) >> _f##_S) 7193 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7194 struct iwn_ops *ops = &sc->ops; 7195 struct iwn_node *wn = (void *)ni; 7196 struct iwn_node_info node; 7197 uint16_t ssn; 7198 uint8_t tid; 7199 int error; 7200 7201 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7202 7203 tid = MS(le16toh(baparamset), IEEE80211_BAPS_TID); 7204 ssn = MS(le16toh(baseqctl), IEEE80211_BASEQ_START); 7205 7206 memset(&node, 0, sizeof node); 7207 node.id = wn->id; 7208 node.control = IWN_NODE_UPDATE; 7209 node.flags = IWN_FLAG_SET_ADDBA; 7210 node.addba_tid = tid; 7211 node.addba_ssn = htole16(ssn); 7212 DPRINTF(sc, IWN_DEBUG_RECV, "ADDBA RA=%d TID=%d SSN=%d\n", 7213 wn->id, tid, ssn); 7214 error = ops->add_node(sc, &node, 1); 7215 if (error != 0) 7216 return error; 7217 return sc->sc_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl); 7218 #undef MS 7219 } 7220 7221 /* 7222 * This function is called by upper layer on teardown of an HT-immediate 7223 * Block Ack agreement (eg. uppon receipt of a DELBA frame). 7224 */ 7225 static void 7226 iwn_ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) 7227 { 7228 struct ieee80211com *ic = ni->ni_ic; 7229 struct iwn_softc *sc = ic->ic_softc; 7230 struct iwn_ops *ops = &sc->ops; 7231 struct iwn_node *wn = (void *)ni; 7232 struct iwn_node_info node; 7233 uint8_t tid; 7234 7235 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7236 7237 /* XXX: tid as an argument */ 7238 for (tid = 0; tid < WME_NUM_TID; tid++) { 7239 if (&ni->ni_rx_ampdu[tid] == rap) 7240 break; 7241 } 7242 7243 memset(&node, 0, sizeof node); 7244 node.id = wn->id; 7245 node.control = IWN_NODE_UPDATE; 7246 node.flags = IWN_FLAG_SET_DELBA; 7247 node.delba_tid = tid; 7248 DPRINTF(sc, IWN_DEBUG_RECV, "DELBA RA=%d TID=%d\n", wn->id, tid); 7249 (void)ops->add_node(sc, &node, 1); 7250 sc->sc_ampdu_rx_stop(ni, rap); 7251 } 7252 7253 static int 7254 iwn_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7255 int dialogtoken, int baparamset, int batimeout) 7256 { 7257 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7258 int qid; 7259 7260 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7261 7262 for (qid = sc->firstaggqueue; qid < sc->ntxqs; qid++) { 7263 if (sc->qid2tap[qid] == NULL) 7264 break; 7265 } 7266 if (qid == sc->ntxqs) { 7267 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: not free aggregation queue\n", 7268 __func__); 7269 return 0; 7270 } 7271 tap->txa_private = malloc(sizeof(int), M_DEVBUF, M_NOWAIT); 7272 if (tap->txa_private == NULL) { 7273 device_printf(sc->sc_dev, 7274 "%s: failed to alloc TX aggregation structure\n", __func__); 7275 return 0; 7276 } 7277 sc->qid2tap[qid] = tap; 7278 *(int *)tap->txa_private = qid; 7279 return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, 7280 batimeout); 7281 } 7282 7283 static int 7284 iwn_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, 7285 int code, int baparamset, int batimeout) 7286 { 7287 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7288 int qid = *(int *)tap->txa_private; 7289 uint8_t tid = tap->txa_tid; 7290 int ret; 7291 7292 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7293 7294 if (code == IEEE80211_STATUS_SUCCESS) { 7295 ni->ni_txseqs[tid] = tap->txa_start & 0xfff; 7296 ret = iwn_ampdu_tx_start(ni->ni_ic, ni, tid); 7297 if (ret != 1) 7298 return ret; 7299 } else { 7300 sc->qid2tap[qid] = NULL; 7301 free(tap->txa_private, M_DEVBUF); 7302 tap->txa_private = NULL; 7303 } 7304 return sc->sc_addba_response(ni, tap, code, baparamset, batimeout); 7305 } 7306 7307 /* 7308 * This function is called by upper layer when an ADDBA response is received 7309 * from another STA. 7310 */ 7311 static int 7312 iwn_ampdu_tx_start(struct ieee80211com *ic, struct ieee80211_node *ni, 7313 uint8_t tid) 7314 { 7315 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; 7316 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7317 struct iwn_ops *ops = &sc->ops; 7318 struct iwn_node *wn = (void *)ni; 7319 struct iwn_node_info node; 7320 int error, qid; 7321 7322 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7323 7324 /* Enable TX for the specified RA/TID. */ 7325 wn->disable_tid &= ~(1 << tid); 7326 memset(&node, 0, sizeof node); 7327 node.id = wn->id; 7328 node.control = IWN_NODE_UPDATE; 7329 node.flags = IWN_FLAG_SET_DISABLE_TID; 7330 node.disable_tid = htole16(wn->disable_tid); 7331 error = ops->add_node(sc, &node, 1); 7332 if (error != 0) 7333 return 0; 7334 7335 if ((error = iwn_nic_lock(sc)) != 0) 7336 return 0; 7337 qid = *(int *)tap->txa_private; 7338 DPRINTF(sc, IWN_DEBUG_XMIT, "%s: ra=%d tid=%d ssn=%d qid=%d\n", 7339 __func__, wn->id, tid, tap->txa_start, qid); 7340 ops->ampdu_tx_start(sc, ni, qid, tid, tap->txa_start & 0xfff); 7341 iwn_nic_unlock(sc); 7342 7343 iwn_set_link_quality(sc, ni); 7344 return 1; 7345 } 7346 7347 static void 7348 iwn_ampdu_tx_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) 7349 { 7350 struct iwn_softc *sc = ni->ni_ic->ic_softc; 7351 struct iwn_ops *ops = &sc->ops; 7352 uint8_t tid = tap->txa_tid; 7353 int qid; 7354 7355 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7356 7357 sc->sc_addba_stop(ni, tap); 7358 7359 if (tap->txa_private == NULL) 7360 return; 7361 7362 qid = *(int *)tap->txa_private; 7363 if (sc->txq[qid].queued != 0) 7364 return; 7365 if (iwn_nic_lock(sc) != 0) 7366 return; 7367 ops->ampdu_tx_stop(sc, qid, tid, tap->txa_start & 0xfff); 7368 iwn_nic_unlock(sc); 7369 sc->qid2tap[qid] = NULL; 7370 free(tap->txa_private, M_DEVBUF); 7371 tap->txa_private = NULL; 7372 } 7373 7374 static void 7375 iwn4965_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7376 int qid, uint8_t tid, uint16_t ssn) 7377 { 7378 struct iwn_node *wn = (void *)ni; 7379 7380 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7381 7382 /* Stop TX scheduler while we're changing its configuration. */ 7383 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7384 IWN4965_TXQ_STATUS_CHGACT); 7385 7386 /* Assign RA/TID translation to the queue. */ 7387 iwn_mem_write_2(sc, sc->sched_base + IWN4965_SCHED_TRANS_TBL(qid), 7388 wn->id << 4 | tid); 7389 7390 /* Enable chain-building mode for the queue. */ 7391 iwn_prph_setbits(sc, IWN4965_SCHED_QCHAIN_SEL, 1 << qid); 7392 7393 /* Set starting sequence number from the ADDBA request. */ 7394 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7395 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7396 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7397 7398 /* Set scheduler window size. */ 7399 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid), 7400 IWN_SCHED_WINSZ); 7401 /* Set scheduler frame limit. */ 7402 iwn_mem_write(sc, sc->sched_base + IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7403 IWN_SCHED_LIMIT << 16); 7404 7405 /* Enable interrupts for the queue. */ 7406 iwn_prph_setbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7407 7408 /* Mark the queue as active. */ 7409 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7410 IWN4965_TXQ_STATUS_ACTIVE | IWN4965_TXQ_STATUS_AGGR_ENA | 7411 iwn_tid2fifo[tid] << 1); 7412 } 7413 7414 static void 7415 iwn4965_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7416 { 7417 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7418 7419 /* Stop TX scheduler while we're changing its configuration. */ 7420 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7421 IWN4965_TXQ_STATUS_CHGACT); 7422 7423 /* Set starting sequence number from the ADDBA request. */ 7424 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7425 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), ssn); 7426 7427 /* Disable interrupts for the queue. */ 7428 iwn_prph_clrbits(sc, IWN4965_SCHED_INTR_MASK, 1 << qid); 7429 7430 /* Mark the queue as inactive. */ 7431 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7432 IWN4965_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid] << 1); 7433 } 7434 7435 static void 7436 iwn5000_ampdu_tx_start(struct iwn_softc *sc, struct ieee80211_node *ni, 7437 int qid, uint8_t tid, uint16_t ssn) 7438 { 7439 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7440 7441 struct iwn_node *wn = (void *)ni; 7442 7443 /* Stop TX scheduler while we're changing its configuration. */ 7444 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7445 IWN5000_TXQ_STATUS_CHGACT); 7446 7447 /* Assign RA/TID translation to the queue. */ 7448 iwn_mem_write_2(sc, sc->sched_base + IWN5000_SCHED_TRANS_TBL(qid), 7449 wn->id << 4 | tid); 7450 7451 /* Enable chain-building mode for the queue. */ 7452 iwn_prph_setbits(sc, IWN5000_SCHED_QCHAIN_SEL, 1 << qid); 7453 7454 /* Enable aggregation for the queue. */ 7455 iwn_prph_setbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7456 7457 /* Set starting sequence number from the ADDBA request. */ 7458 sc->txq[qid].cur = sc->txq[qid].read = (ssn & 0xff); 7459 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7460 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7461 7462 /* Set scheduler window size and frame limit. */ 7463 iwn_mem_write(sc, sc->sched_base + IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 7464 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 7465 7466 /* Enable interrupts for the queue. */ 7467 iwn_prph_setbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7468 7469 /* Mark the queue as active. */ 7470 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7471 IWN5000_TXQ_STATUS_ACTIVE | iwn_tid2fifo[tid]); 7472 } 7473 7474 static void 7475 iwn5000_ampdu_tx_stop(struct iwn_softc *sc, int qid, uint8_t tid, uint16_t ssn) 7476 { 7477 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7478 7479 /* Stop TX scheduler while we're changing its configuration. */ 7480 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7481 IWN5000_TXQ_STATUS_CHGACT); 7482 7483 /* Disable aggregation for the queue. */ 7484 iwn_prph_clrbits(sc, IWN5000_SCHED_AGGR_SEL, 1 << qid); 7485 7486 /* Set starting sequence number from the ADDBA request. */ 7487 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | (ssn & 0xff)); 7488 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), ssn); 7489 7490 /* Disable interrupts for the queue. */ 7491 iwn_prph_clrbits(sc, IWN5000_SCHED_INTR_MASK, 1 << qid); 7492 7493 /* Mark the queue as inactive. */ 7494 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7495 IWN5000_TXQ_STATUS_INACTIVE | iwn_tid2fifo[tid]); 7496 } 7497 7498 /* 7499 * Query calibration tables from the initialization firmware. We do this 7500 * only once at first boot. Called from a process context. 7501 */ 7502 static int 7503 iwn5000_query_calibration(struct iwn_softc *sc) 7504 { 7505 struct iwn5000_calib_config cmd; 7506 int error; 7507 7508 memset(&cmd, 0, sizeof cmd); 7509 cmd.ucode.once.enable = htole32(0xffffffff); 7510 cmd.ucode.once.start = htole32(0xffffffff); 7511 cmd.ucode.once.send = htole32(0xffffffff); 7512 cmd.ucode.flags = htole32(0xffffffff); 7513 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "%s: sending calibration query\n", 7514 __func__); 7515 error = iwn_cmd(sc, IWN5000_CMD_CALIB_CONFIG, &cmd, sizeof cmd, 0); 7516 if (error != 0) 7517 return error; 7518 7519 /* Wait at most two seconds for calibration to complete. */ 7520 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) 7521 error = msleep(sc, &sc->sc_mtx, PCATCH, "iwncal", 2 * hz); 7522 return error; 7523 } 7524 7525 /* 7526 * Send calibration results to the runtime firmware. These results were 7527 * obtained on first boot from the initialization firmware. 7528 */ 7529 static int 7530 iwn5000_send_calibration(struct iwn_softc *sc) 7531 { 7532 int idx, error; 7533 7534 for (idx = 0; idx < IWN5000_PHY_CALIB_MAX_RESULT; idx++) { 7535 if (!(sc->base_params->calib_need & (1<<idx))) { 7536 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7537 "No need of calib %d\n", 7538 idx); 7539 continue; /* no need for this calib */ 7540 } 7541 if (sc->calibcmd[idx].buf == NULL) { 7542 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7543 "Need calib idx : %d but no available data\n", 7544 idx); 7545 continue; 7546 } 7547 7548 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7549 "send calibration result idx=%d len=%d\n", idx, 7550 sc->calibcmd[idx].len); 7551 error = iwn_cmd(sc, IWN_CMD_PHY_CALIB, sc->calibcmd[idx].buf, 7552 sc->calibcmd[idx].len, 0); 7553 if (error != 0) { 7554 device_printf(sc->sc_dev, 7555 "%s: could not send calibration result, error %d\n", 7556 __func__, error); 7557 return error; 7558 } 7559 } 7560 return 0; 7561 } 7562 7563 static int 7564 iwn5000_send_wimax_coex(struct iwn_softc *sc) 7565 { 7566 struct iwn5000_wimax_coex wimax; 7567 7568 #if 0 7569 if (sc->hw_type == IWN_HW_REV_TYPE_6050) { 7570 /* Enable WiMAX coexistence for combo adapters. */ 7571 wimax.flags = 7572 IWN_WIMAX_COEX_ASSOC_WA_UNMASK | 7573 IWN_WIMAX_COEX_UNASSOC_WA_UNMASK | 7574 IWN_WIMAX_COEX_STA_TABLE_VALID | 7575 IWN_WIMAX_COEX_ENABLE; 7576 memcpy(wimax.events, iwn6050_wimax_events, 7577 sizeof iwn6050_wimax_events); 7578 } else 7579 #endif 7580 { 7581 /* Disable WiMAX coexistence. */ 7582 wimax.flags = 0; 7583 memset(wimax.events, 0, sizeof wimax.events); 7584 } 7585 DPRINTF(sc, IWN_DEBUG_RESET, "%s: Configuring WiMAX coexistence\n", 7586 __func__); 7587 return iwn_cmd(sc, IWN5000_CMD_WIMAX_COEX, &wimax, sizeof wimax, 0); 7588 } 7589 7590 static int 7591 iwn5000_crystal_calib(struct iwn_softc *sc) 7592 { 7593 struct iwn5000_phy_calib_crystal cmd; 7594 7595 memset(&cmd, 0, sizeof cmd); 7596 cmd.code = IWN5000_PHY_CALIB_CRYSTAL; 7597 cmd.ngroups = 1; 7598 cmd.isvalid = 1; 7599 cmd.cap_pin[0] = le32toh(sc->eeprom_crystal) & 0xff; 7600 cmd.cap_pin[1] = (le32toh(sc->eeprom_crystal) >> 16) & 0xff; 7601 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "sending crystal calibration %d, %d\n", 7602 cmd.cap_pin[0], cmd.cap_pin[1]); 7603 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7604 } 7605 7606 static int 7607 iwn5000_temp_offset_calib(struct iwn_softc *sc) 7608 { 7609 struct iwn5000_phy_calib_temp_offset cmd; 7610 7611 memset(&cmd, 0, sizeof cmd); 7612 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7613 cmd.ngroups = 1; 7614 cmd.isvalid = 1; 7615 if (sc->eeprom_temp != 0) 7616 cmd.offset = htole16(sc->eeprom_temp); 7617 else 7618 cmd.offset = htole16(IWN_DEFAULT_TEMP_OFFSET); 7619 DPRINTF(sc, IWN_DEBUG_CALIBRATE, "setting radio sensor offset to %d\n", 7620 le16toh(cmd.offset)); 7621 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7622 } 7623 7624 static int 7625 iwn5000_temp_offset_calibv2(struct iwn_softc *sc) 7626 { 7627 struct iwn5000_phy_calib_temp_offsetv2 cmd; 7628 7629 memset(&cmd, 0, sizeof cmd); 7630 cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET; 7631 cmd.ngroups = 1; 7632 cmd.isvalid = 1; 7633 if (sc->eeprom_temp != 0) { 7634 cmd.offset_low = htole16(sc->eeprom_temp); 7635 cmd.offset_high = htole16(sc->eeprom_temp_high); 7636 } else { 7637 cmd.offset_low = htole16(IWN_DEFAULT_TEMP_OFFSET); 7638 cmd.offset_high = htole16(IWN_DEFAULT_TEMP_OFFSET); 7639 } 7640 cmd.burnt_voltage_ref = htole16(sc->eeprom_voltage); 7641 7642 DPRINTF(sc, IWN_DEBUG_CALIBRATE, 7643 "setting radio sensor low offset to %d, high offset to %d, voltage to %d\n", 7644 le16toh(cmd.offset_low), 7645 le16toh(cmd.offset_high), 7646 le16toh(cmd.burnt_voltage_ref)); 7647 7648 return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0); 7649 } 7650 7651 /* 7652 * This function is called after the runtime firmware notifies us of its 7653 * readiness (called in a process context). 7654 */ 7655 static int 7656 iwn4965_post_alive(struct iwn_softc *sc) 7657 { 7658 int error, qid; 7659 7660 if ((error = iwn_nic_lock(sc)) != 0) 7661 return error; 7662 7663 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7664 7665 /* Clear TX scheduler state in SRAM. */ 7666 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7667 iwn_mem_set_region_4(sc, sc->sched_base + IWN4965_SCHED_CTX_OFF, 0, 7668 IWN4965_SCHED_CTX_LEN / sizeof (uint32_t)); 7669 7670 /* Set physical address of TX scheduler rings (1KB aligned). */ 7671 iwn_prph_write(sc, IWN4965_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 7672 7673 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 7674 7675 /* Disable chain mode for all our 16 queues. */ 7676 iwn_prph_write(sc, IWN4965_SCHED_QCHAIN_SEL, 0); 7677 7678 for (qid = 0; qid < IWN4965_NTXQUEUES; qid++) { 7679 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_RDPTR(qid), 0); 7680 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 7681 7682 /* Set scheduler window size. */ 7683 iwn_mem_write(sc, sc->sched_base + 7684 IWN4965_SCHED_QUEUE_OFFSET(qid), IWN_SCHED_WINSZ); 7685 /* Set scheduler frame limit. */ 7686 iwn_mem_write(sc, sc->sched_base + 7687 IWN4965_SCHED_QUEUE_OFFSET(qid) + 4, 7688 IWN_SCHED_LIMIT << 16); 7689 } 7690 7691 /* Enable interrupts for all our 16 queues. */ 7692 iwn_prph_write(sc, IWN4965_SCHED_INTR_MASK, 0xffff); 7693 /* Identify TX FIFO rings (0-7). */ 7694 iwn_prph_write(sc, IWN4965_SCHED_TXFACT, 0xff); 7695 7696 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7697 for (qid = 0; qid < 7; qid++) { 7698 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 4, 5, 6 }; 7699 iwn_prph_write(sc, IWN4965_SCHED_QUEUE_STATUS(qid), 7700 IWN4965_TXQ_STATUS_ACTIVE | qid2fifo[qid] << 1); 7701 } 7702 iwn_nic_unlock(sc); 7703 return 0; 7704 } 7705 7706 /* 7707 * This function is called after the initialization or runtime firmware 7708 * notifies us of its readiness (called in a process context). 7709 */ 7710 static int 7711 iwn5000_post_alive(struct iwn_softc *sc) 7712 { 7713 int error, qid; 7714 7715 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 7716 7717 /* Switch to using ICT interrupt mode. */ 7718 iwn5000_ict_reset(sc); 7719 7720 if ((error = iwn_nic_lock(sc)) != 0){ 7721 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s end in error\n", __func__); 7722 return error; 7723 } 7724 7725 /* Clear TX scheduler state in SRAM. */ 7726 sc->sched_base = iwn_prph_read(sc, IWN_SCHED_SRAM_ADDR); 7727 iwn_mem_set_region_4(sc, sc->sched_base + IWN5000_SCHED_CTX_OFF, 0, 7728 IWN5000_SCHED_CTX_LEN / sizeof (uint32_t)); 7729 7730 /* Set physical address of TX scheduler rings (1KB aligned). */ 7731 iwn_prph_write(sc, IWN5000_SCHED_DRAM_ADDR, sc->sched_dma.paddr >> 10); 7732 7733 IWN_SETBITS(sc, IWN_FH_TX_CHICKEN, IWN_FH_TX_CHICKEN_SCHED_RETRY); 7734 7735 /* Enable chain mode for all queues, except command queue. */ 7736 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) 7737 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffdf); 7738 else 7739 iwn_prph_write(sc, IWN5000_SCHED_QCHAIN_SEL, 0xfffef); 7740 iwn_prph_write(sc, IWN5000_SCHED_AGGR_SEL, 0); 7741 7742 for (qid = 0; qid < IWN5000_NTXQUEUES; qid++) { 7743 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_RDPTR(qid), 0); 7744 IWN_WRITE(sc, IWN_HBUS_TARG_WRPTR, qid << 8 | 0); 7745 7746 iwn_mem_write(sc, sc->sched_base + 7747 IWN5000_SCHED_QUEUE_OFFSET(qid), 0); 7748 /* Set scheduler window size and frame limit. */ 7749 iwn_mem_write(sc, sc->sched_base + 7750 IWN5000_SCHED_QUEUE_OFFSET(qid) + 4, 7751 IWN_SCHED_LIMIT << 16 | IWN_SCHED_WINSZ); 7752 } 7753 7754 /* Enable interrupts for all our 20 queues. */ 7755 iwn_prph_write(sc, IWN5000_SCHED_INTR_MASK, 0xfffff); 7756 /* Identify TX FIFO rings (0-7). */ 7757 iwn_prph_write(sc, IWN5000_SCHED_TXFACT, 0xff); 7758 7759 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7760 if (sc->sc_flags & IWN_FLAG_PAN_SUPPORT) { 7761 /* Mark TX rings as active. */ 7762 for (qid = 0; qid < 11; qid++) { 7763 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 0, 4, 2, 5, 4, 7, 5 }; 7764 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7765 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 7766 } 7767 } else { 7768 /* Mark TX rings (4 EDCA + cmd + 2 HCCA) as active. */ 7769 for (qid = 0; qid < 7; qid++) { 7770 static uint8_t qid2fifo[] = { 3, 2, 1, 0, 7, 5, 6 }; 7771 iwn_prph_write(sc, IWN5000_SCHED_QUEUE_STATUS(qid), 7772 IWN5000_TXQ_STATUS_ACTIVE | qid2fifo[qid]); 7773 } 7774 } 7775 iwn_nic_unlock(sc); 7776 7777 /* Configure WiMAX coexistence for combo adapters. */ 7778 error = iwn5000_send_wimax_coex(sc); 7779 if (error != 0) { 7780 device_printf(sc->sc_dev, 7781 "%s: could not configure WiMAX coexistence, error %d\n", 7782 __func__, error); 7783 return error; 7784 } 7785 if (sc->hw_type != IWN_HW_REV_TYPE_5150) { 7786 /* Perform crystal calibration. */ 7787 error = iwn5000_crystal_calib(sc); 7788 if (error != 0) { 7789 device_printf(sc->sc_dev, 7790 "%s: crystal calibration failed, error %d\n", 7791 __func__, error); 7792 return error; 7793 } 7794 } 7795 if (!(sc->sc_flags & IWN_FLAG_CALIB_DONE)) { 7796 /* Query calibration from the initialization firmware. */ 7797 if ((error = iwn5000_query_calibration(sc)) != 0) { 7798 device_printf(sc->sc_dev, 7799 "%s: could not query calibration, error %d\n", 7800 __func__, error); 7801 return error; 7802 } 7803 /* 7804 * We have the calibration results now, reboot with the 7805 * runtime firmware (call ourselves recursively!) 7806 */ 7807 iwn_hw_stop(sc); 7808 error = iwn_hw_init(sc); 7809 } else { 7810 /* Send calibration results to runtime firmware. */ 7811 error = iwn5000_send_calibration(sc); 7812 } 7813 7814 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 7815 7816 return error; 7817 } 7818 7819 /* 7820 * The firmware boot code is small and is intended to be copied directly into 7821 * the NIC internal memory (no DMA transfer). 7822 */ 7823 static int 7824 iwn4965_load_bootcode(struct iwn_softc *sc, const uint8_t *ucode, int size) 7825 { 7826 int error, ntries; 7827 7828 size /= sizeof (uint32_t); 7829 7830 if ((error = iwn_nic_lock(sc)) != 0) 7831 return error; 7832 7833 /* Copy microcode image into NIC memory. */ 7834 iwn_prph_write_region_4(sc, IWN_BSM_SRAM_BASE, 7835 (const uint32_t *)ucode, size); 7836 7837 iwn_prph_write(sc, IWN_BSM_WR_MEM_SRC, 0); 7838 iwn_prph_write(sc, IWN_BSM_WR_MEM_DST, IWN_FW_TEXT_BASE); 7839 iwn_prph_write(sc, IWN_BSM_WR_DWCOUNT, size); 7840 7841 /* Start boot load now. */ 7842 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START); 7843 7844 /* Wait for transfer to complete. */ 7845 for (ntries = 0; ntries < 1000; ntries++) { 7846 if (!(iwn_prph_read(sc, IWN_BSM_WR_CTRL) & 7847 IWN_BSM_WR_CTRL_START)) 7848 break; 7849 DELAY(10); 7850 } 7851 if (ntries == 1000) { 7852 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 7853 __func__); 7854 iwn_nic_unlock(sc); 7855 return ETIMEDOUT; 7856 } 7857 7858 /* Enable boot after power up. */ 7859 iwn_prph_write(sc, IWN_BSM_WR_CTRL, IWN_BSM_WR_CTRL_START_EN); 7860 7861 iwn_nic_unlock(sc); 7862 return 0; 7863 } 7864 7865 static int 7866 iwn4965_load_firmware(struct iwn_softc *sc) 7867 { 7868 struct iwn_fw_info *fw = &sc->fw; 7869 struct iwn_dma_info *dma = &sc->fw_dma; 7870 int error; 7871 7872 /* Copy initialization sections into pre-allocated DMA-safe memory. */ 7873 memcpy(dma->vaddr, fw->init.data, fw->init.datasz); 7874 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7875 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 7876 fw->init.text, fw->init.textsz); 7877 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7878 7879 /* Tell adapter where to find initialization sections. */ 7880 if ((error = iwn_nic_lock(sc)) != 0) 7881 return error; 7882 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 7883 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->init.datasz); 7884 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 7885 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 7886 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, fw->init.textsz); 7887 iwn_nic_unlock(sc); 7888 7889 /* Load firmware boot code. */ 7890 error = iwn4965_load_bootcode(sc, fw->boot.text, fw->boot.textsz); 7891 if (error != 0) { 7892 device_printf(sc->sc_dev, "%s: could not load boot firmware\n", 7893 __func__); 7894 return error; 7895 } 7896 /* Now press "execute". */ 7897 IWN_WRITE(sc, IWN_RESET, 0); 7898 7899 /* Wait at most one second for first alive notification. */ 7900 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) { 7901 device_printf(sc->sc_dev, 7902 "%s: timeout waiting for adapter to initialize, error %d\n", 7903 __func__, error); 7904 return error; 7905 } 7906 7907 /* Retrieve current temperature for initial TX power calibration. */ 7908 sc->rawtemp = sc->ucode_info.temp[3].chan20MHz; 7909 sc->temp = iwn4965_get_temperature(sc); 7910 7911 /* Copy runtime sections into pre-allocated DMA-safe memory. */ 7912 memcpy(dma->vaddr, fw->main.data, fw->main.datasz); 7913 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7914 memcpy(dma->vaddr + IWN4965_FW_DATA_MAXSZ, 7915 fw->main.text, fw->main.textsz); 7916 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7917 7918 /* Tell adapter where to find runtime sections. */ 7919 if ((error = iwn_nic_lock(sc)) != 0) 7920 return error; 7921 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_ADDR, dma->paddr >> 4); 7922 iwn_prph_write(sc, IWN_BSM_DRAM_DATA_SIZE, fw->main.datasz); 7923 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_ADDR, 7924 (dma->paddr + IWN4965_FW_DATA_MAXSZ) >> 4); 7925 iwn_prph_write(sc, IWN_BSM_DRAM_TEXT_SIZE, 7926 IWN_FW_UPDATED | fw->main.textsz); 7927 iwn_nic_unlock(sc); 7928 7929 return 0; 7930 } 7931 7932 static int 7933 iwn5000_load_firmware_section(struct iwn_softc *sc, uint32_t dst, 7934 const uint8_t *section, int size) 7935 { 7936 struct iwn_dma_info *dma = &sc->fw_dma; 7937 int error; 7938 7939 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7940 7941 /* Copy firmware section into pre-allocated DMA-safe memory. */ 7942 memcpy(dma->vaddr, section, size); 7943 bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); 7944 7945 if ((error = iwn_nic_lock(sc)) != 0) 7946 return error; 7947 7948 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 7949 IWN_FH_TX_CONFIG_DMA_PAUSE); 7950 7951 IWN_WRITE(sc, IWN_FH_SRAM_ADDR(IWN_SRVC_DMACHNL), dst); 7952 IWN_WRITE(sc, IWN_FH_TFBD_CTRL0(IWN_SRVC_DMACHNL), 7953 IWN_LOADDR(dma->paddr)); 7954 IWN_WRITE(sc, IWN_FH_TFBD_CTRL1(IWN_SRVC_DMACHNL), 7955 IWN_HIADDR(dma->paddr) << 28 | size); 7956 IWN_WRITE(sc, IWN_FH_TXBUF_STATUS(IWN_SRVC_DMACHNL), 7957 IWN_FH_TXBUF_STATUS_TBNUM(1) | 7958 IWN_FH_TXBUF_STATUS_TBIDX(1) | 7959 IWN_FH_TXBUF_STATUS_TFBD_VALID); 7960 7961 /* Kick Flow Handler to start DMA transfer. */ 7962 IWN_WRITE(sc, IWN_FH_TX_CONFIG(IWN_SRVC_DMACHNL), 7963 IWN_FH_TX_CONFIG_DMA_ENA | IWN_FH_TX_CONFIG_CIRQ_HOST_ENDTFD); 7964 7965 iwn_nic_unlock(sc); 7966 7967 /* Wait at most five seconds for FH DMA transfer to complete. */ 7968 return msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", 5 * hz); 7969 } 7970 7971 static int 7972 iwn5000_load_firmware(struct iwn_softc *sc) 7973 { 7974 struct iwn_fw_part *fw; 7975 int error; 7976 7977 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 7978 7979 /* Load the initialization firmware on first boot only. */ 7980 fw = (sc->sc_flags & IWN_FLAG_CALIB_DONE) ? 7981 &sc->fw.main : &sc->fw.init; 7982 7983 error = iwn5000_load_firmware_section(sc, IWN_FW_TEXT_BASE, 7984 fw->text, fw->textsz); 7985 if (error != 0) { 7986 device_printf(sc->sc_dev, 7987 "%s: could not load firmware %s section, error %d\n", 7988 __func__, ".text", error); 7989 return error; 7990 } 7991 error = iwn5000_load_firmware_section(sc, IWN_FW_DATA_BASE, 7992 fw->data, fw->datasz); 7993 if (error != 0) { 7994 device_printf(sc->sc_dev, 7995 "%s: could not load firmware %s section, error %d\n", 7996 __func__, ".data", error); 7997 return error; 7998 } 7999 8000 /* Now press "execute". */ 8001 IWN_WRITE(sc, IWN_RESET, 0); 8002 return 0; 8003 } 8004 8005 /* 8006 * Extract text and data sections from a legacy firmware image. 8007 */ 8008 static int 8009 iwn_read_firmware_leg(struct iwn_softc *sc, struct iwn_fw_info *fw) 8010 { 8011 const uint32_t *ptr; 8012 size_t hdrlen = 24; 8013 uint32_t rev; 8014 8015 ptr = (const uint32_t *)fw->data; 8016 rev = le32toh(*ptr++); 8017 8018 sc->ucode_rev = rev; 8019 8020 /* Check firmware API version. */ 8021 if (IWN_FW_API(rev) <= 1) { 8022 device_printf(sc->sc_dev, 8023 "%s: bad firmware, need API version >=2\n", __func__); 8024 return EINVAL; 8025 } 8026 if (IWN_FW_API(rev) >= 3) { 8027 /* Skip build number (version 2 header). */ 8028 hdrlen += 4; 8029 ptr++; 8030 } 8031 if (fw->size < hdrlen) { 8032 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8033 __func__, fw->size); 8034 return EINVAL; 8035 } 8036 fw->main.textsz = le32toh(*ptr++); 8037 fw->main.datasz = le32toh(*ptr++); 8038 fw->init.textsz = le32toh(*ptr++); 8039 fw->init.datasz = le32toh(*ptr++); 8040 fw->boot.textsz = le32toh(*ptr++); 8041 8042 /* Check that all firmware sections fit. */ 8043 if (fw->size < hdrlen + fw->main.textsz + fw->main.datasz + 8044 fw->init.textsz + fw->init.datasz + fw->boot.textsz) { 8045 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8046 __func__, fw->size); 8047 return EINVAL; 8048 } 8049 8050 /* Get pointers to firmware sections. */ 8051 fw->main.text = (const uint8_t *)ptr; 8052 fw->main.data = fw->main.text + fw->main.textsz; 8053 fw->init.text = fw->main.data + fw->main.datasz; 8054 fw->init.data = fw->init.text + fw->init.textsz; 8055 fw->boot.text = fw->init.data + fw->init.datasz; 8056 return 0; 8057 } 8058 8059 /* 8060 * Extract text and data sections from a TLV firmware image. 8061 */ 8062 static int 8063 iwn_read_firmware_tlv(struct iwn_softc *sc, struct iwn_fw_info *fw, 8064 uint16_t alt) 8065 { 8066 const struct iwn_fw_tlv_hdr *hdr; 8067 const struct iwn_fw_tlv *tlv; 8068 const uint8_t *ptr, *end; 8069 uint64_t altmask; 8070 uint32_t len, tmp; 8071 8072 if (fw->size < sizeof (*hdr)) { 8073 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8074 __func__, fw->size); 8075 return EINVAL; 8076 } 8077 hdr = (const struct iwn_fw_tlv_hdr *)fw->data; 8078 if (hdr->signature != htole32(IWN_FW_SIGNATURE)) { 8079 device_printf(sc->sc_dev, "%s: bad firmware signature 0x%08x\n", 8080 __func__, le32toh(hdr->signature)); 8081 return EINVAL; 8082 } 8083 DPRINTF(sc, IWN_DEBUG_RESET, "FW: \"%.64s\", build 0x%x\n", hdr->descr, 8084 le32toh(hdr->build)); 8085 sc->ucode_rev = le32toh(hdr->rev); 8086 8087 /* 8088 * Select the closest supported alternative that is less than 8089 * or equal to the specified one. 8090 */ 8091 altmask = le64toh(hdr->altmask); 8092 while (alt > 0 && !(altmask & (1ULL << alt))) 8093 alt--; /* Downgrade. */ 8094 DPRINTF(sc, IWN_DEBUG_RESET, "using alternative %d\n", alt); 8095 8096 ptr = (const uint8_t *)(hdr + 1); 8097 end = (const uint8_t *)(fw->data + fw->size); 8098 8099 /* Parse type-length-value fields. */ 8100 while (ptr + sizeof (*tlv) <= end) { 8101 tlv = (const struct iwn_fw_tlv *)ptr; 8102 len = le32toh(tlv->len); 8103 8104 ptr += sizeof (*tlv); 8105 if (ptr + len > end) { 8106 device_printf(sc->sc_dev, 8107 "%s: firmware too short: %zu bytes\n", __func__, 8108 fw->size); 8109 return EINVAL; 8110 } 8111 /* Skip other alternatives. */ 8112 if (tlv->alt != 0 && tlv->alt != htole16(alt)) 8113 goto next; 8114 8115 switch (le16toh(tlv->type)) { 8116 case IWN_FW_TLV_MAIN_TEXT: 8117 fw->main.text = ptr; 8118 fw->main.textsz = len; 8119 break; 8120 case IWN_FW_TLV_MAIN_DATA: 8121 fw->main.data = ptr; 8122 fw->main.datasz = len; 8123 break; 8124 case IWN_FW_TLV_INIT_TEXT: 8125 fw->init.text = ptr; 8126 fw->init.textsz = len; 8127 break; 8128 case IWN_FW_TLV_INIT_DATA: 8129 fw->init.data = ptr; 8130 fw->init.datasz = len; 8131 break; 8132 case IWN_FW_TLV_BOOT_TEXT: 8133 fw->boot.text = ptr; 8134 fw->boot.textsz = len; 8135 break; 8136 case IWN_FW_TLV_ENH_SENS: 8137 if (!len) 8138 sc->sc_flags |= IWN_FLAG_ENH_SENS; 8139 break; 8140 case IWN_FW_TLV_PHY_CALIB: 8141 tmp = le32toh(*ptr); 8142 if (tmp < 253) { 8143 sc->reset_noise_gain = tmp; 8144 sc->noise_gain = tmp + 1; 8145 } 8146 break; 8147 case IWN_FW_TLV_PAN: 8148 sc->sc_flags |= IWN_FLAG_PAN_SUPPORT; 8149 DPRINTF(sc, IWN_DEBUG_RESET, 8150 "PAN Support found: %d\n", 1); 8151 break; 8152 case IWN_FW_TLV_FLAGS: 8153 if (len < sizeof(uint32_t)) 8154 break; 8155 if (len % sizeof(uint32_t)) 8156 break; 8157 sc->tlv_feature_flags = le32toh(*ptr); 8158 DPRINTF(sc, IWN_DEBUG_RESET, 8159 "%s: feature: 0x%08x\n", 8160 __func__, 8161 sc->tlv_feature_flags); 8162 break; 8163 case IWN_FW_TLV_PBREQ_MAXLEN: 8164 case IWN_FW_TLV_RUNT_EVTLOG_PTR: 8165 case IWN_FW_TLV_RUNT_EVTLOG_SIZE: 8166 case IWN_FW_TLV_RUNT_ERRLOG_PTR: 8167 case IWN_FW_TLV_INIT_EVTLOG_PTR: 8168 case IWN_FW_TLV_INIT_EVTLOG_SIZE: 8169 case IWN_FW_TLV_INIT_ERRLOG_PTR: 8170 case IWN_FW_TLV_WOWLAN_INST: 8171 case IWN_FW_TLV_WOWLAN_DATA: 8172 DPRINTF(sc, IWN_DEBUG_RESET, 8173 "TLV type %d recognized but not handled\n", 8174 le16toh(tlv->type)); 8175 break; 8176 default: 8177 DPRINTF(sc, IWN_DEBUG_RESET, 8178 "TLV type %d not handled\n", le16toh(tlv->type)); 8179 break; 8180 } 8181 next: /* TLV fields are 32-bit aligned. */ 8182 ptr += (len + 3) & ~3; 8183 } 8184 return 0; 8185 } 8186 8187 static int 8188 iwn_read_firmware(struct iwn_softc *sc) 8189 { 8190 struct iwn_fw_info *fw = &sc->fw; 8191 int error; 8192 8193 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8194 8195 IWN_UNLOCK(sc); 8196 8197 memset(fw, 0, sizeof (*fw)); 8198 8199 /* Read firmware image from filesystem. */ 8200 sc->fw_fp = firmware_get(sc->fwname); 8201 if (sc->fw_fp == NULL) { 8202 device_printf(sc->sc_dev, "%s: could not read firmware %s\n", 8203 __func__, sc->fwname); 8204 IWN_LOCK(sc); 8205 return EINVAL; 8206 } 8207 IWN_LOCK(sc); 8208 8209 fw->size = sc->fw_fp->datasize; 8210 fw->data = (const uint8_t *)sc->fw_fp->data; 8211 if (fw->size < sizeof (uint32_t)) { 8212 device_printf(sc->sc_dev, "%s: firmware too short: %zu bytes\n", 8213 __func__, fw->size); 8214 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8215 sc->fw_fp = NULL; 8216 return EINVAL; 8217 } 8218 8219 /* Retrieve text and data sections. */ 8220 if (*(const uint32_t *)fw->data != 0) /* Legacy image. */ 8221 error = iwn_read_firmware_leg(sc, fw); 8222 else 8223 error = iwn_read_firmware_tlv(sc, fw, 1); 8224 if (error != 0) { 8225 device_printf(sc->sc_dev, 8226 "%s: could not read firmware sections, error %d\n", 8227 __func__, error); 8228 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8229 sc->fw_fp = NULL; 8230 return error; 8231 } 8232 8233 device_printf(sc->sc_dev, "%s: ucode rev=0x%08x\n", __func__, sc->ucode_rev); 8234 8235 /* Make sure text and data sections fit in hardware memory. */ 8236 if (fw->main.textsz > sc->fw_text_maxsz || 8237 fw->main.datasz > sc->fw_data_maxsz || 8238 fw->init.textsz > sc->fw_text_maxsz || 8239 fw->init.datasz > sc->fw_data_maxsz || 8240 fw->boot.textsz > IWN_FW_BOOT_TEXT_MAXSZ || 8241 (fw->boot.textsz & 3) != 0) { 8242 device_printf(sc->sc_dev, "%s: firmware sections too large\n", 8243 __func__); 8244 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8245 sc->fw_fp = NULL; 8246 return EINVAL; 8247 } 8248 8249 /* We can proceed with loading the firmware. */ 8250 return 0; 8251 } 8252 8253 static int 8254 iwn_clock_wait(struct iwn_softc *sc) 8255 { 8256 int ntries; 8257 8258 /* Set "initialization complete" bit. */ 8259 IWN_SETBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8260 8261 /* Wait for clock stabilization. */ 8262 for (ntries = 0; ntries < 2500; ntries++) { 8263 if (IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_MAC_CLOCK_READY) 8264 return 0; 8265 DELAY(10); 8266 } 8267 device_printf(sc->sc_dev, 8268 "%s: timeout waiting for clock stabilization\n", __func__); 8269 return ETIMEDOUT; 8270 } 8271 8272 static int 8273 iwn_apm_init(struct iwn_softc *sc) 8274 { 8275 uint32_t reg; 8276 int error; 8277 8278 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8279 8280 /* Disable L0s exit timer (NMI bug workaround). */ 8281 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_DIS_L0S_TIMER); 8282 /* Don't wait for ICH L0s (ICH bug workaround). */ 8283 IWN_SETBITS(sc, IWN_GIO_CHICKEN, IWN_GIO_CHICKEN_L1A_NO_L0S_RX); 8284 8285 /* Set FH wait threshold to max (HW bug under stress workaround). */ 8286 IWN_SETBITS(sc, IWN_DBG_HPET_MEM, 0xffff0000); 8287 8288 /* Enable HAP INTA to move adapter from L1a to L0s. */ 8289 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_HAP_WAKE_L1A); 8290 8291 /* Retrieve PCIe Active State Power Management (ASPM). */ 8292 reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); 8293 /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */ 8294 if (reg & 0x02) /* L1 Entry enabled. */ 8295 IWN_SETBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8296 else 8297 IWN_CLRBITS(sc, IWN_GIO, IWN_GIO_L0S_ENA); 8298 8299 if (sc->base_params->pll_cfg_val) 8300 IWN_SETBITS(sc, IWN_ANA_PLL, sc->base_params->pll_cfg_val); 8301 8302 /* Wait for clock stabilization before accessing prph. */ 8303 if ((error = iwn_clock_wait(sc)) != 0) 8304 return error; 8305 8306 if ((error = iwn_nic_lock(sc)) != 0) 8307 return error; 8308 if (sc->hw_type == IWN_HW_REV_TYPE_4965) { 8309 /* Enable DMA and BSM (Bootstrap State Machine). */ 8310 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8311 IWN_APMG_CLK_CTRL_DMA_CLK_RQT | 8312 IWN_APMG_CLK_CTRL_BSM_CLK_RQT); 8313 } else { 8314 /* Enable DMA. */ 8315 iwn_prph_write(sc, IWN_APMG_CLK_EN, 8316 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8317 } 8318 DELAY(20); 8319 /* Disable L1-Active. */ 8320 iwn_prph_setbits(sc, IWN_APMG_PCI_STT, IWN_APMG_PCI_STT_L1A_DIS); 8321 iwn_nic_unlock(sc); 8322 8323 return 0; 8324 } 8325 8326 static void 8327 iwn_apm_stop_master(struct iwn_softc *sc) 8328 { 8329 int ntries; 8330 8331 /* Stop busmaster DMA activity. */ 8332 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_STOP_MASTER); 8333 for (ntries = 0; ntries < 100; ntries++) { 8334 if (IWN_READ(sc, IWN_RESET) & IWN_RESET_MASTER_DISABLED) 8335 return; 8336 DELAY(10); 8337 } 8338 device_printf(sc->sc_dev, "%s: timeout waiting for master\n", __func__); 8339 } 8340 8341 static void 8342 iwn_apm_stop(struct iwn_softc *sc) 8343 { 8344 iwn_apm_stop_master(sc); 8345 8346 /* Reset the entire device. */ 8347 IWN_SETBITS(sc, IWN_RESET, IWN_RESET_SW); 8348 DELAY(10); 8349 /* Clear "initialization complete" bit. */ 8350 IWN_CLRBITS(sc, IWN_GP_CNTRL, IWN_GP_CNTRL_INIT_DONE); 8351 } 8352 8353 static int 8354 iwn4965_nic_config(struct iwn_softc *sc) 8355 { 8356 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8357 8358 if (IWN_RFCFG_TYPE(sc->rfcfg) == 1) { 8359 /* 8360 * I don't believe this to be correct but this is what the 8361 * vendor driver is doing. Probably the bits should not be 8362 * shifted in IWN_RFCFG_*. 8363 */ 8364 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8365 IWN_RFCFG_TYPE(sc->rfcfg) | 8366 IWN_RFCFG_STEP(sc->rfcfg) | 8367 IWN_RFCFG_DASH(sc->rfcfg)); 8368 } 8369 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8370 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8371 return 0; 8372 } 8373 8374 static int 8375 iwn5000_nic_config(struct iwn_softc *sc) 8376 { 8377 uint32_t tmp; 8378 int error; 8379 8380 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8381 8382 if (IWN_RFCFG_TYPE(sc->rfcfg) < 3) { 8383 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8384 IWN_RFCFG_TYPE(sc->rfcfg) | 8385 IWN_RFCFG_STEP(sc->rfcfg) | 8386 IWN_RFCFG_DASH(sc->rfcfg)); 8387 } 8388 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, 8389 IWN_HW_IF_CONFIG_RADIO_SI | IWN_HW_IF_CONFIG_MAC_SI); 8390 8391 if ((error = iwn_nic_lock(sc)) != 0) 8392 return error; 8393 iwn_prph_setbits(sc, IWN_APMG_PS, IWN_APMG_PS_EARLY_PWROFF_DIS); 8394 8395 if (sc->hw_type == IWN_HW_REV_TYPE_1000) { 8396 /* 8397 * Select first Switching Voltage Regulator (1.32V) to 8398 * solve a stability issue related to noisy DC2DC line 8399 * in the silicon of 1000 Series. 8400 */ 8401 tmp = iwn_prph_read(sc, IWN_APMG_DIGITAL_SVR); 8402 tmp &= ~IWN_APMG_DIGITAL_SVR_VOLTAGE_MASK; 8403 tmp |= IWN_APMG_DIGITAL_SVR_VOLTAGE_1_32; 8404 iwn_prph_write(sc, IWN_APMG_DIGITAL_SVR, tmp); 8405 } 8406 iwn_nic_unlock(sc); 8407 8408 if (sc->sc_flags & IWN_FLAG_INTERNAL_PA) { 8409 /* Use internal power amplifier only. */ 8410 IWN_WRITE(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_2X2_IPA); 8411 } 8412 if (sc->base_params->additional_nic_config && sc->calib_ver >= 6) { 8413 /* Indicate that ROM calibration version is >=6. */ 8414 IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_CALIB_VER6); 8415 } 8416 if (sc->base_params->additional_gp_drv_bit) 8417 IWN_SETBITS(sc, IWN_GP_DRIVER, 8418 sc->base_params->additional_gp_drv_bit); 8419 return 0; 8420 } 8421 8422 /* 8423 * Take NIC ownership over Intel Active Management Technology (AMT). 8424 */ 8425 static int 8426 iwn_hw_prepare(struct iwn_softc *sc) 8427 { 8428 int ntries; 8429 8430 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8431 8432 /* Check if hardware is ready. */ 8433 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8434 for (ntries = 0; ntries < 5; ntries++) { 8435 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8436 IWN_HW_IF_CONFIG_NIC_READY) 8437 return 0; 8438 DELAY(10); 8439 } 8440 8441 /* Hardware not ready, force into ready state. */ 8442 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_PREPARE); 8443 for (ntries = 0; ntries < 15000; ntries++) { 8444 if (!(IWN_READ(sc, IWN_HW_IF_CONFIG) & 8445 IWN_HW_IF_CONFIG_PREPARE_DONE)) 8446 break; 8447 DELAY(10); 8448 } 8449 if (ntries == 15000) 8450 return ETIMEDOUT; 8451 8452 /* Hardware should be ready now. */ 8453 IWN_SETBITS(sc, IWN_HW_IF_CONFIG, IWN_HW_IF_CONFIG_NIC_READY); 8454 for (ntries = 0; ntries < 5; ntries++) { 8455 if (IWN_READ(sc, IWN_HW_IF_CONFIG) & 8456 IWN_HW_IF_CONFIG_NIC_READY) 8457 return 0; 8458 DELAY(10); 8459 } 8460 return ETIMEDOUT; 8461 } 8462 8463 static int 8464 iwn_hw_init(struct iwn_softc *sc) 8465 { 8466 struct iwn_ops *ops = &sc->ops; 8467 int error, chnl, qid; 8468 8469 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8470 8471 /* Clear pending interrupts. */ 8472 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8473 8474 if ((error = iwn_apm_init(sc)) != 0) { 8475 device_printf(sc->sc_dev, 8476 "%s: could not power ON adapter, error %d\n", __func__, 8477 error); 8478 return error; 8479 } 8480 8481 /* Select VMAIN power source. */ 8482 if ((error = iwn_nic_lock(sc)) != 0) 8483 return error; 8484 iwn_prph_clrbits(sc, IWN_APMG_PS, IWN_APMG_PS_PWR_SRC_MASK); 8485 iwn_nic_unlock(sc); 8486 8487 /* Perform adapter-specific initialization. */ 8488 if ((error = ops->nic_config(sc)) != 0) 8489 return error; 8490 8491 /* Initialize RX ring. */ 8492 if ((error = iwn_nic_lock(sc)) != 0) 8493 return error; 8494 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 0); 8495 IWN_WRITE(sc, IWN_FH_RX_WPTR, 0); 8496 /* Set physical address of RX ring (256-byte aligned). */ 8497 IWN_WRITE(sc, IWN_FH_RX_BASE, sc->rxq.desc_dma.paddr >> 8); 8498 /* Set physical address of RX status (16-byte aligned). */ 8499 IWN_WRITE(sc, IWN_FH_STATUS_WPTR, sc->rxq.stat_dma.paddr >> 4); 8500 /* Enable RX. */ 8501 IWN_WRITE(sc, IWN_FH_RX_CONFIG, 8502 IWN_FH_RX_CONFIG_ENA | 8503 IWN_FH_RX_CONFIG_IGN_RXF_EMPTY | /* HW bug workaround */ 8504 IWN_FH_RX_CONFIG_IRQ_DST_HOST | 8505 IWN_FH_RX_CONFIG_SINGLE_FRAME | 8506 IWN_FH_RX_CONFIG_RB_TIMEOUT(0) | 8507 IWN_FH_RX_CONFIG_NRBD(IWN_RX_RING_COUNT_LOG)); 8508 iwn_nic_unlock(sc); 8509 IWN_WRITE(sc, IWN_FH_RX_WPTR, (IWN_RX_RING_COUNT - 1) & ~7); 8510 8511 if ((error = iwn_nic_lock(sc)) != 0) 8512 return error; 8513 8514 /* Initialize TX scheduler. */ 8515 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8516 8517 /* Set physical address of "keep warm" page (16-byte aligned). */ 8518 IWN_WRITE(sc, IWN_FH_KW_ADDR, sc->kw_dma.paddr >> 4); 8519 8520 /* Initialize TX rings. */ 8521 for (qid = 0; qid < sc->ntxqs; qid++) { 8522 struct iwn_tx_ring *txq = &sc->txq[qid]; 8523 8524 /* Set physical address of TX ring (256-byte aligned). */ 8525 IWN_WRITE(sc, IWN_FH_CBBC_QUEUE(qid), 8526 txq->desc_dma.paddr >> 8); 8527 } 8528 iwn_nic_unlock(sc); 8529 8530 /* Enable DMA channels. */ 8531 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8532 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 8533 IWN_FH_TX_CONFIG_DMA_ENA | 8534 IWN_FH_TX_CONFIG_DMA_CREDIT_ENA); 8535 } 8536 8537 /* Clear "radio off" and "commands blocked" bits. */ 8538 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8539 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_CMD_BLOCKED); 8540 8541 /* Clear pending interrupts. */ 8542 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8543 /* Enable interrupt coalescing. */ 8544 IWN_WRITE(sc, IWN_INT_COALESCING, 512 / 8); 8545 /* Enable interrupts. */ 8546 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8547 8548 /* _Really_ make sure "radio off" bit is cleared! */ 8549 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8550 IWN_WRITE(sc, IWN_UCODE_GP1_CLR, IWN_UCODE_GP1_RFKILL); 8551 8552 /* Enable shadow registers. */ 8553 if (sc->base_params->shadow_reg_enable) 8554 IWN_SETBITS(sc, IWN_SHADOW_REG_CTRL, 0x800fffff); 8555 8556 if ((error = ops->load_firmware(sc)) != 0) { 8557 device_printf(sc->sc_dev, 8558 "%s: could not load firmware, error %d\n", __func__, 8559 error); 8560 return error; 8561 } 8562 /* Wait at most one second for firmware alive notification. */ 8563 if ((error = msleep(sc, &sc->sc_mtx, PCATCH, "iwninit", hz)) != 0) { 8564 device_printf(sc->sc_dev, 8565 "%s: timeout waiting for adapter to initialize, error %d\n", 8566 __func__, error); 8567 return error; 8568 } 8569 /* Do post-firmware initialization. */ 8570 8571 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8572 8573 return ops->post_alive(sc); 8574 } 8575 8576 static void 8577 iwn_hw_stop(struct iwn_softc *sc) 8578 { 8579 int chnl, qid, ntries; 8580 8581 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8582 8583 IWN_WRITE(sc, IWN_RESET, IWN_RESET_NEVO); 8584 8585 /* Disable interrupts. */ 8586 IWN_WRITE(sc, IWN_INT_MASK, 0); 8587 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8588 IWN_WRITE(sc, IWN_FH_INT, 0xffffffff); 8589 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8590 8591 /* Make sure we no longer hold the NIC lock. */ 8592 iwn_nic_unlock(sc); 8593 8594 /* Stop TX scheduler. */ 8595 iwn_prph_write(sc, sc->sched_txfact_addr, 0); 8596 8597 /* Stop all DMA channels. */ 8598 if (iwn_nic_lock(sc) == 0) { 8599 for (chnl = 0; chnl < sc->ndmachnls; chnl++) { 8600 IWN_WRITE(sc, IWN_FH_TX_CONFIG(chnl), 0); 8601 for (ntries = 0; ntries < 200; ntries++) { 8602 if (IWN_READ(sc, IWN_FH_TX_STATUS) & 8603 IWN_FH_TX_STATUS_IDLE(chnl)) 8604 break; 8605 DELAY(10); 8606 } 8607 } 8608 iwn_nic_unlock(sc); 8609 } 8610 8611 /* Stop RX ring. */ 8612 iwn_reset_rx_ring(sc, &sc->rxq); 8613 8614 /* Reset all TX rings. */ 8615 for (qid = 0; qid < sc->ntxqs; qid++) 8616 iwn_reset_tx_ring(sc, &sc->txq[qid]); 8617 8618 if (iwn_nic_lock(sc) == 0) { 8619 iwn_prph_write(sc, IWN_APMG_CLK_DIS, 8620 IWN_APMG_CLK_CTRL_DMA_CLK_RQT); 8621 iwn_nic_unlock(sc); 8622 } 8623 DELAY(5); 8624 /* Power OFF adapter. */ 8625 iwn_apm_stop(sc); 8626 } 8627 8628 static void 8629 iwn_radio_on(void *arg0, int pending) 8630 { 8631 struct iwn_softc *sc = arg0; 8632 struct ieee80211com *ic = &sc->sc_ic; 8633 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8634 8635 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8636 8637 if (vap != NULL) { 8638 iwn_init(sc); 8639 ieee80211_init(vap); 8640 } 8641 } 8642 8643 static void 8644 iwn_radio_off(void *arg0, int pending) 8645 { 8646 struct iwn_softc *sc = arg0; 8647 struct ieee80211com *ic = &sc->sc_ic; 8648 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8649 8650 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8651 8652 iwn_stop(sc); 8653 if (vap != NULL) 8654 ieee80211_stop(vap); 8655 8656 /* Enable interrupts to get RF toggle notification. */ 8657 IWN_LOCK(sc); 8658 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8659 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8660 IWN_UNLOCK(sc); 8661 } 8662 8663 static void 8664 iwn_panicked(void *arg0, int pending) 8665 { 8666 struct iwn_softc *sc = arg0; 8667 struct ieee80211com *ic = &sc->sc_ic; 8668 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8669 int error; 8670 8671 if (vap == NULL) { 8672 printf("%s: null vap\n", __func__); 8673 return; 8674 } 8675 8676 device_printf(sc->sc_dev, "%s: controller panicked, iv_state = %d; " 8677 "resetting...\n", __func__, vap->iv_state); 8678 8679 IWN_LOCK(sc); 8680 8681 iwn_stop_locked(sc); 8682 iwn_init_locked(sc); 8683 if (vap->iv_state >= IEEE80211_S_AUTH && 8684 (error = iwn_auth(sc, vap)) != 0) { 8685 device_printf(sc->sc_dev, 8686 "%s: could not move to auth state\n", __func__); 8687 } 8688 if (vap->iv_state >= IEEE80211_S_RUN && 8689 (error = iwn_run(sc, vap)) != 0) { 8690 device_printf(sc->sc_dev, 8691 "%s: could not move to run state\n", __func__); 8692 } 8693 8694 IWN_UNLOCK(sc); 8695 } 8696 8697 static void 8698 iwn_init_locked(struct iwn_softc *sc) 8699 { 8700 int error; 8701 8702 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s begin\n", __func__); 8703 8704 IWN_LOCK_ASSERT(sc); 8705 8706 sc->sc_flags |= IWN_FLAG_RUNNING; 8707 8708 if ((error = iwn_hw_prepare(sc)) != 0) { 8709 device_printf(sc->sc_dev, "%s: hardware not ready, error %d\n", 8710 __func__, error); 8711 goto fail; 8712 } 8713 8714 /* Initialize interrupt mask to default value. */ 8715 sc->int_mask = IWN_INT_MASK_DEF; 8716 sc->sc_flags &= ~IWN_FLAG_USE_ICT; 8717 8718 /* Check that the radio is not disabled by hardware switch. */ 8719 if (!(IWN_READ(sc, IWN_GP_CNTRL) & IWN_GP_CNTRL_RFKILL)) { 8720 device_printf(sc->sc_dev, 8721 "radio is disabled by hardware switch\n"); 8722 /* Enable interrupts to get RF toggle notifications. */ 8723 IWN_WRITE(sc, IWN_INT, 0xffffffff); 8724 IWN_WRITE(sc, IWN_INT_MASK, sc->int_mask); 8725 return; 8726 } 8727 8728 /* Read firmware images from the filesystem. */ 8729 if ((error = iwn_read_firmware(sc)) != 0) { 8730 device_printf(sc->sc_dev, 8731 "%s: could not read firmware, error %d\n", __func__, 8732 error); 8733 goto fail; 8734 } 8735 8736 /* Initialize hardware and upload firmware. */ 8737 error = iwn_hw_init(sc); 8738 firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); 8739 sc->fw_fp = NULL; 8740 if (error != 0) { 8741 device_printf(sc->sc_dev, 8742 "%s: could not initialize hardware, error %d\n", __func__, 8743 error); 8744 goto fail; 8745 } 8746 8747 /* Configure adapter now that it is ready. */ 8748 if ((error = iwn_config(sc)) != 0) { 8749 device_printf(sc->sc_dev, 8750 "%s: could not configure device, error %d\n", __func__, 8751 error); 8752 goto fail; 8753 } 8754 8755 callout_reset(&sc->watchdog_to, hz, iwn_watchdog, sc); 8756 8757 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end\n",__func__); 8758 8759 return; 8760 8761 fail: 8762 sc->sc_flags &= ~IWN_FLAG_RUNNING; 8763 iwn_stop_locked(sc); 8764 DPRINTF(sc, IWN_DEBUG_TRACE, "->%s: end in error\n",__func__); 8765 } 8766 8767 static void 8768 iwn_init(struct iwn_softc *sc) 8769 { 8770 8771 IWN_LOCK(sc); 8772 iwn_init_locked(sc); 8773 IWN_UNLOCK(sc); 8774 8775 if (sc->sc_flags & IWN_FLAG_RUNNING) 8776 ieee80211_start_all(&sc->sc_ic); 8777 } 8778 8779 static void 8780 iwn_stop_locked(struct iwn_softc *sc) 8781 { 8782 8783 IWN_LOCK_ASSERT(sc); 8784 8785 sc->sc_is_scanning = 0; 8786 sc->sc_tx_timer = 0; 8787 callout_stop(&sc->watchdog_to); 8788 callout_stop(&sc->calib_to); 8789 sc->sc_flags &= ~IWN_FLAG_RUNNING; 8790 8791 /* Power OFF hardware. */ 8792 iwn_hw_stop(sc); 8793 } 8794 8795 static void 8796 iwn_stop(struct iwn_softc *sc) 8797 { 8798 IWN_LOCK(sc); 8799 iwn_stop_locked(sc); 8800 IWN_UNLOCK(sc); 8801 } 8802 8803 /* 8804 * Callback from net80211 to start a scan. 8805 */ 8806 static void 8807 iwn_scan_start(struct ieee80211com *ic) 8808 { 8809 struct iwn_softc *sc = ic->ic_softc; 8810 8811 IWN_LOCK(sc); 8812 /* make the link LED blink while we're scanning */ 8813 iwn_set_led(sc, IWN_LED_LINK, 20, 2); 8814 IWN_UNLOCK(sc); 8815 } 8816 8817 /* 8818 * Callback from net80211 to terminate a scan. 8819 */ 8820 static void 8821 iwn_scan_end(struct ieee80211com *ic) 8822 { 8823 struct iwn_softc *sc = ic->ic_softc; 8824 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 8825 8826 IWN_LOCK(sc); 8827 if (vap->iv_state == IEEE80211_S_RUN) { 8828 /* Set link LED to ON status if we are associated */ 8829 iwn_set_led(sc, IWN_LED_LINK, 0, 1); 8830 } 8831 IWN_UNLOCK(sc); 8832 } 8833 8834 /* 8835 * Callback from net80211 to force a channel change. 8836 */ 8837 static void 8838 iwn_set_channel(struct ieee80211com *ic) 8839 { 8840 const struct ieee80211_channel *c = ic->ic_curchan; 8841 struct iwn_softc *sc = ic->ic_softc; 8842 int error; 8843 8844 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8845 8846 IWN_LOCK(sc); 8847 sc->sc_rxtap.wr_chan_freq = htole16(c->ic_freq); 8848 sc->sc_rxtap.wr_chan_flags = htole16(c->ic_flags); 8849 sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq); 8850 sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags); 8851 8852 /* 8853 * Only need to set the channel in Monitor mode. AP scanning and auth 8854 * are already taken care of by their respective firmware commands. 8855 */ 8856 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 8857 error = iwn_config(sc); 8858 if (error != 0) 8859 device_printf(sc->sc_dev, 8860 "%s: error %d settting channel\n", __func__, error); 8861 } 8862 IWN_UNLOCK(sc); 8863 } 8864 8865 /* 8866 * Callback from net80211 to start scanning of the current channel. 8867 */ 8868 static void 8869 iwn_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) 8870 { 8871 struct ieee80211vap *vap = ss->ss_vap; 8872 struct ieee80211com *ic = vap->iv_ic; 8873 struct iwn_softc *sc = ic->ic_softc; 8874 int error; 8875 8876 IWN_LOCK(sc); 8877 error = iwn_scan(sc, vap, ss, ic->ic_curchan); 8878 IWN_UNLOCK(sc); 8879 if (error != 0) 8880 ieee80211_cancel_scan(vap); 8881 } 8882 8883 /* 8884 * Callback from net80211 to handle the minimum dwell time being met. 8885 * The intent is to terminate the scan but we just let the firmware 8886 * notify us when it's finished as we have no safe way to abort it. 8887 */ 8888 static void 8889 iwn_scan_mindwell(struct ieee80211_scan_state *ss) 8890 { 8891 /* NB: don't try to abort scan; wait for firmware to finish */ 8892 } 8893 8894 static void 8895 iwn_hw_reset(void *arg0, int pending) 8896 { 8897 struct iwn_softc *sc = arg0; 8898 struct ieee80211com *ic = &sc->sc_ic; 8899 8900 DPRINTF(sc, IWN_DEBUG_TRACE, "->Doing %s\n", __func__); 8901 8902 iwn_stop(sc); 8903 iwn_init(sc); 8904 ieee80211_notify_radio(ic, 1); 8905 } 8906 #ifdef IWN_DEBUG 8907 #define IWN_DESC(x) case x: return #x 8908 8909 /* 8910 * Translate CSR code to string 8911 */ 8912 static char *iwn_get_csr_string(int csr) 8913 { 8914 switch (csr) { 8915 IWN_DESC(IWN_HW_IF_CONFIG); 8916 IWN_DESC(IWN_INT_COALESCING); 8917 IWN_DESC(IWN_INT); 8918 IWN_DESC(IWN_INT_MASK); 8919 IWN_DESC(IWN_FH_INT); 8920 IWN_DESC(IWN_GPIO_IN); 8921 IWN_DESC(IWN_RESET); 8922 IWN_DESC(IWN_GP_CNTRL); 8923 IWN_DESC(IWN_HW_REV); 8924 IWN_DESC(IWN_EEPROM); 8925 IWN_DESC(IWN_EEPROM_GP); 8926 IWN_DESC(IWN_OTP_GP); 8927 IWN_DESC(IWN_GIO); 8928 IWN_DESC(IWN_GP_UCODE); 8929 IWN_DESC(IWN_GP_DRIVER); 8930 IWN_DESC(IWN_UCODE_GP1); 8931 IWN_DESC(IWN_UCODE_GP2); 8932 IWN_DESC(IWN_LED); 8933 IWN_DESC(IWN_DRAM_INT_TBL); 8934 IWN_DESC(IWN_GIO_CHICKEN); 8935 IWN_DESC(IWN_ANA_PLL); 8936 IWN_DESC(IWN_HW_REV_WA); 8937 IWN_DESC(IWN_DBG_HPET_MEM); 8938 default: 8939 return "UNKNOWN CSR"; 8940 } 8941 } 8942 8943 /* 8944 * This function print firmware register 8945 */ 8946 static void 8947 iwn_debug_register(struct iwn_softc *sc) 8948 { 8949 int i; 8950 static const uint32_t csr_tbl[] = { 8951 IWN_HW_IF_CONFIG, 8952 IWN_INT_COALESCING, 8953 IWN_INT, 8954 IWN_INT_MASK, 8955 IWN_FH_INT, 8956 IWN_GPIO_IN, 8957 IWN_RESET, 8958 IWN_GP_CNTRL, 8959 IWN_HW_REV, 8960 IWN_EEPROM, 8961 IWN_EEPROM_GP, 8962 IWN_OTP_GP, 8963 IWN_GIO, 8964 IWN_GP_UCODE, 8965 IWN_GP_DRIVER, 8966 IWN_UCODE_GP1, 8967 IWN_UCODE_GP2, 8968 IWN_LED, 8969 IWN_DRAM_INT_TBL, 8970 IWN_GIO_CHICKEN, 8971 IWN_ANA_PLL, 8972 IWN_HW_REV_WA, 8973 IWN_DBG_HPET_MEM, 8974 }; 8975 DPRINTF(sc, IWN_DEBUG_REGISTER, 8976 "CSR values: (2nd byte of IWN_INT_COALESCING is IWN_INT_PERIODIC)%s", 8977 "\n"); 8978 for (i = 0; i < nitems(csr_tbl); i++){ 8979 DPRINTF(sc, IWN_DEBUG_REGISTER," %10s: 0x%08x ", 8980 iwn_get_csr_string(csr_tbl[i]), IWN_READ(sc, csr_tbl[i])); 8981 if ((i+1) % 3 == 0) 8982 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 8983 } 8984 DPRINTF(sc, IWN_DEBUG_REGISTER,"%s","\n"); 8985 } 8986 #endif 8987 8988 8989