xref: /freebsd/sys/dev/isp/ispvar.h (revision c807777a43ef2b59786fa8a1a35c1f154fd069e5)
1 /* $FreeBSD$ */
2 /*
3  * Soft Definitions for for Qlogic ISP SCSI adapters.
4  *
5  * Copyright (c) 1997, 1998, 1999 by Matthew Jacob
6  * NASA/Ames Research Center
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice immediately at the beginning of the file, without modification,
14  *    this list of conditions, and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. The name of the author may not be used to endorse or promote products
19  *    derived from this software without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
25  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  */
34 
35 #ifndef	_ISPVAR_H
36 #define	_ISPVAR_H
37 
38 #if defined(__NetBSD__) || defined(__OpenBSD__)
39 #include <dev/ic/ispmbox.h>
40 #ifdef	ISP_TARGET_MODE
41 #include <dev/ic/isp_target.h>
42 #endif
43 #endif
44 #ifdef	__FreeBSD__
45 #include <dev/isp/ispmbox.h>
46 #ifdef	ISP_TARGET_MODE
47 #include <dev/isp/isp_target.h>
48 #endif
49 #endif
50 #ifdef	__linux__
51 #include "ispmbox.h"
52 #ifdef	ISP_TARGET_MODE
53 #include "isp_target.h"
54 #endif
55 #endif
56 
57 #define	ISP_CORE_VERSION_MAJOR	1
58 #define	ISP_CORE_VERSION_MINOR	12
59 
60 /*
61  * Vector for bus specific code to provide specific services.
62  */
63 struct ispsoftc;
64 struct ispmdvec {
65 	u_int16_t	(*dv_rd_reg) __P((struct ispsoftc *, int));
66 	void		(*dv_wr_reg) __P((struct ispsoftc *, int, u_int16_t));
67 	int		(*dv_mbxdma) __P((struct ispsoftc *));
68 	int		(*dv_dmaset) __P((struct ispsoftc *,
69 		ISP_SCSI_XFER_T *, ispreq_t *, u_int16_t *, u_int16_t));
70 	void		(*dv_dmaclr)
71 		__P((struct ispsoftc *, ISP_SCSI_XFER_T *, u_int32_t));
72 	void		(*dv_reset0) __P((struct ispsoftc *));
73 	void		(*dv_reset1) __P((struct ispsoftc *));
74 	void		(*dv_dregs) __P((struct ispsoftc *));
75 	const u_int16_t *dv_ispfw;	/* ptr to f/w */
76 	u_int16_t 	dv_fwlen;	/* length of f/w */
77 	u_int16_t	dv_codeorg;	/* code ORG for f/w */
78 	u_int32_t	dv_fwrev;	/* f/w revision */
79 	/*
80 	 * Initial values for conf1 register
81 	 */
82 	u_int16_t	dv_conf1;
83 	u_int16_t	dv_clock;	/* clock frequency */
84 };
85 
86 #define	MAX_TARGETS	16
87 #ifdef	ISP2100_FABRIC
88 #define	MAX_FC_TARG	256
89 #else
90 #define	MAX_FC_TARG	126
91 #endif
92 
93 #define	ISP_MAX_TARGETS(isp)	(IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS)
94 #ifdef	ISP2100_SCCLUN
95 #define	_ISP_FC_LUN(isp)	65536
96 #else
97 #define	_ISP_FC_LUN(isp)	16
98 #endif
99 #define	_ISP_SCSI_LUN(isp)	\
100 	((ISP_FW_REVX(isp->isp_fwrev) >= ISP_FW_REV(7, 55, 0))? 32 : 8)
101 #define	ISP_MAX_LUNS(isp)	\
102 	(IS_FC(isp)? _ISP_FC_LUN(isp) : _ISP_SCSI_LUN(isp))
103 
104 
105 /*
106  * Macros to read, write ISP registers through bus specific code.
107  */
108 
109 #define	ISP_READ(isp, reg)	\
110 	(*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
111 
112 #define	ISP_WRITE(isp, reg, val)	\
113 	(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
114 
115 #define	ISP_MBOXDMASETUP(isp)	\
116 	(*(isp)->isp_mdvec->dv_mbxdma)((isp))
117 
118 #define	ISP_DMASETUP(isp, xs, req, iptrp, optr)	\
119 	(*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr))
120 
121 #define	ISP_DMAFREE(isp, xs, hndl)	\
122 	if ((isp)->isp_mdvec->dv_dmaclr) \
123 	    (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl))
124 
125 #define	ISP_RESET0(isp)	\
126 	if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
127 #define	ISP_RESET1(isp)	\
128 	if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
129 #define	ISP_DUMPREGS(isp)	\
130 	if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp))
131 
132 #define	ISP_SETBITS(isp, reg, val)	\
133  (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
134 
135 #define	ISP_CLRBITS(isp, reg, val)	\
136  (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
137 
138 /* this is the size of a queue entry (request and response) */
139 #define	QENTRY_LEN			64
140 /* both request and result queue length must be a power of two */
141 #define	RQUEST_QUEUE_LEN		MAXISPREQUEST
142 /* I've seen wierdnesses with the result queue < 64 */
143 #if	MAXISPREQUEST > 64
144 #define	RESULT_QUEUE_LEN		(MAXISPREQUEST/2)
145 #else
146 #define	RESULT_QUEUE_LEN		MAXISPREQUEST
147 #endif
148 #define	ISP_QUEUE_ENTRY(q, idx)		((q) + ((idx) * QENTRY_LEN))
149 #define	ISP_QUEUE_SIZE(n)		((n) * QENTRY_LEN)
150 #define	ISP_NXT_QENTRY(idx, qlen)	(((idx) + 1) & ((qlen)-1))
151 #define	ISP_QAVAIL(in, out, qlen)	\
152 	((in == out)? (qlen - 1) : ((in > out)? \
153 	((qlen - 1) - (in - out)) : (out - in - 1)))
154 
155 #define	ISP_ADD_REQUEST(isp, iptr)	\
156 	ISP_WRITE(isp, INMAILBOX4, iptr), isp->isp_reqidx = iptr
157 
158 /*
159  * SCSI Specific Host Adapter Parameters- per bus, per target
160  */
161 
162 typedef struct {
163 	u_int		isp_gotdparms		: 1,
164 			isp_req_ack_active_neg	: 1,
165 			isp_data_line_active_neg: 1,
166 			isp_cmd_dma_burst_enable: 1,
167 			isp_data_dma_burst_enabl: 1,
168 			isp_fifo_threshold	: 3,
169 			isp_ultramode		: 1,
170 			isp_diffmode		: 1,
171 			isp_lvdmode		: 1,
172 						: 1,
173 			isp_initiator_id	: 4,
174 			isp_async_data_setup	: 4;
175 	u_int16_t	isp_selection_timeout;
176 	u_int16_t	isp_max_queue_depth;
177 	u_int8_t	isp_tag_aging;
178 	u_int8_t	isp_bus_reset_delay;
179 	u_int8_t	isp_retry_count;
180 	u_int8_t	isp_retry_delay;
181 	struct {
182 		u_int	dev_enable	:	1,	/* ignored */
183 					:	1,
184 			dev_update	:	1,
185 			dev_refresh	:	1,
186 			exc_throttle	:	8,
187 			cur_offset	:	4,
188 			sync_offset	:	4;
189 		u_int8_t	cur_period;	/* current sync period */
190 		u_int8_t	sync_period;	/* goal sync period */
191 		u_int16_t	dev_flags;	/* goal device flags */
192 		u_int16_t	cur_dflags;	/* current device flags */
193 	} isp_devparam[MAX_TARGETS];
194 } sdparam;
195 
196 /*
197  * Device Flags
198  */
199 #define	DPARM_DISC	0x8000
200 #define	DPARM_PARITY	0x4000
201 #define	DPARM_WIDE	0x2000
202 #define	DPARM_SYNC	0x1000
203 #define	DPARM_TQING	0x0800
204 #define	DPARM_ARQ	0x0400
205 #define	DPARM_QFRZ	0x0200
206 #define	DPARM_RENEG	0x0100
207 #define	DPARM_NARROW	0x0080	/* Possibly only available with >= 7.55 fw */
208 #define	DPARM_ASYNC	0x0040	/* Possibly only available with >= 7.55 fw */
209 #define	DPARM_DEFAULT	(0xFF00 & ~DPARM_QFRZ)
210 #define	DPARM_SAFE_DFLT	(DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING))
211 
212 
213 /* technically, not really correct, as they need to be rated based upon clock */
214 #define	ISP_40M_SYNCPARMS	0x080a
215 #define	ISP_20M_SYNCPARMS	0x080c
216 #define	ISP_10M_SYNCPARMS	0x0c19
217 #define	ISP_08M_SYNCPARMS	0x0c25
218 #define	ISP_05M_SYNCPARMS	0x0c32
219 #define	ISP_04M_SYNCPARMS	0x0c41
220 
221 /*
222  * Fibre Channel Specifics
223  */
224 #define	FL_PORT_ID		0x7e	/* FL_Port Special ID */
225 #define	FC_PORT_ID		0x7f	/* Fabric Controller Special ID */
226 #define	FC_SNS_ID		0x80	/* SNS Server Special ID */
227 
228 typedef struct {
229 	u_int32_t		isp_fwoptions	: 16,
230 						: 7,
231 				loop_seen_once	: 1,
232 				isp_loopstate	: 3,	/* Current Loop State */
233 				isp_fwstate	: 3,	/* ISP F/W state */
234 				isp_gotdparms	: 1,
235 				isp_onfabric	: 1;
236 	u_int8_t		isp_loopid;	/* hard loop id */
237 	u_int8_t		isp_alpa;	/* ALPA */
238 	volatile u_int16_t	isp_lipseq;	/* LIP sequence # */
239 	u_int32_t		isp_portid;
240 	u_int8_t		isp_execthrottle;
241 	u_int8_t		isp_retry_delay;
242 	u_int8_t		isp_retry_count;
243 	u_int8_t		isp_reserved;
244 	u_int16_t		isp_maxalloc;
245 	u_int16_t		isp_maxfrmlen;
246 	u_int64_t		isp_nodewwn;
247 	u_int64_t		isp_portwwn;
248 	/*
249 	 * Port Data Base. This is indexed by 'target', which is invariate.
250 	 * However, elements within can move around due to loop changes,
251 	 * so the actual loop ID passed to the F/W is in this structure.
252 	 * The first time the loop is seen up, loopid will match the index
253 	 * (except for fabric nodes which are above mapped above FC_SNS_ID
254 	 * and are completely virtual), but subsequent LIPs can cause things
255 	 * to move around.
256 	 */
257 	struct lportdb {
258 		u_int
259 					loopid	: 8,
260 						: 4,
261 					fabdev	: 1,
262 					roles	: 2,
263 					valid	: 1;
264 		u_int32_t		portid;
265 		u_int64_t		node_wwn;
266 		u_int64_t		port_wwn;
267 	} portdb[MAX_FC_TARG], tport[FL_PORT_ID];
268 
269 	/*
270 	 * Scratch DMA mapped in area to fetch Port Database stuff, etc.
271 	 */
272 	caddr_t			isp_scratch;
273 	u_int32_t		isp_scdma;
274 } fcparam;
275 
276 #define	FW_CONFIG_WAIT		0
277 #define	FW_WAIT_AL_PA		1
278 #define	FW_WAIT_LOGIN		2
279 #define	FW_READY		3
280 #define	FW_LOSS_OF_SYNC		4
281 #define	FW_ERROR		5
282 #define	FW_REINIT		6
283 #define	FW_NON_PART		7
284 
285 #define	LOOP_NIL		0
286 #define	LOOP_LIP_RCVD		1
287 #define	LOOP_PDB_RCVD		2
288 #define	LOOP_READY		7
289 
290 /*
291  * Soft Structure per host adapter
292  */
293 struct ispsoftc {
294 	/*
295 	 * Platform (OS) specific data
296 	 */
297 	struct isposinfo	isp_osinfo;
298 
299 	/*
300 	 * Pointer to bus specific functions and data
301 	 */
302 	struct ispmdvec *	isp_mdvec;
303 
304 	/*
305 	 * (Mostly) nonvolatile state. Board specific parameters
306 	 * may contain some volatile state (e.g., current loop state).
307 	 */
308 
309 	void * 			isp_param;	/* type specific */
310 	u_int16_t		isp_fwrev[3];	/* Loaded F/W revision */
311 	u_int16_t		isp_romfw_rev[3]; /* PROM F/W revision */
312 	u_int16_t		isp_maxcmds;	/* max possible I/O cmds */
313 	u_int8_t		isp_type;	/* HBA Chip Type */
314 	u_int8_t		isp_revision;	/* HBA Chip H/W Revision */
315 
316 	u_int32_t				: 4,
317 				isp_touched	: 1,	/* board ever seen? */
318 				isp_fast_mttr	: 1,	/* fast sram */
319 				isp_bustype	: 1,	/* SBus or PCI */
320 				isp_dogactive	: 1,	/* watchdog running */
321 				isp_dblev	: 8,	/* debug level */
322 				isp_clock	: 8,	/* input clock */
323 				isp_confopts	: 8;	/* config options */
324 
325 	/*
326 	 * Volatile state
327 	 */
328 
329 	volatile u_int32_t	:	9,
330 		isp_state	:	3,
331 		isp_sendmarker	:	2,	/* send a marker entry */
332 		isp_update	:	2,	/* update parameters */
333 		isp_nactive	:	16;	/* how many commands active */
334 
335 	volatile u_int16_t	isp_reqodx;	/* index of last ISP pickup */
336 	volatile u_int16_t	isp_reqidx;	/* index of next request */
337 	volatile u_int16_t	isp_residx;	/* index of next result */
338 	volatile u_int16_t	isp_lasthdls;	/* last handle seed */
339 
340 	/*
341 	 * Active commands are stored here, indexed by handle functions.
342 	 */
343 	ISP_SCSI_XFER_T **isp_xflist;
344 
345 	/*
346 	 * request/result queue pointers and dma handles for them.
347 	 */
348 	caddr_t			isp_rquest;
349 	caddr_t			isp_result;
350 	u_int32_t		isp_rquest_dma;
351 	u_int32_t		isp_result_dma;
352 };
353 
354 #define	SDPARAM(isp)	((sdparam *) (isp)->isp_param)
355 #define	FCPARAM(isp)	((fcparam *) (isp)->isp_param)
356 
357 /*
358  * ISP States
359  */
360 #define	ISP_NILSTATE	0
361 #define	ISP_RESETSTATE	1
362 #define	ISP_INITSTATE	2
363 #define	ISP_RUNSTATE	3
364 
365 /*
366  * ISP Configuration Options
367  */
368 #define	ISP_CFG_NORELOAD	0x80	/* don't download f/w */
369 #define	ISP_CFG_NONVRAM		0x40	/* ignore NVRAM */
370 #define	ISP_CFG_FULL_DUPLEX	0x01	/* Full Duplex (Fibre Channel only) */
371 #define	ISP_CFG_OWNWWN		0x02	/* override NVRAM wwn */
372 
373 #define	ISP_FW_REV(maj, min, mic)	((maj << 24) | (min << 16) | mic)
374 #define	ISP_FW_REVX(xp)	((xp[0]<<24) | (xp[1] << 16) | xp[2])
375 
376 /*
377  * Bus (implementation) types
378  */
379 #define	ISP_BT_PCI		0	/* PCI Implementations */
380 #define	ISP_BT_SBUS		1	/* SBus Implementations */
381 
382 /*
383  * Chip Types
384  */
385 #define	ISP_HA_SCSI		0xf
386 #define	ISP_HA_SCSI_UNKNOWN	0x1
387 #define	ISP_HA_SCSI_1020	0x2
388 #define	ISP_HA_SCSI_1020A	0x3
389 #define	ISP_HA_SCSI_1040	0x4
390 #define	ISP_HA_SCSI_1040A	0x5
391 #define	ISP_HA_SCSI_1040B	0x6
392 #define	ISP_HA_SCSI_1040C	0x7
393 #define	ISP_HA_SCSI_1240	0x8
394 #define	ISP_HA_SCSI_1080	0x9
395 #define	ISP_HA_SCSI_1280	0xa
396 #define	ISP_HA_FC		0xf0
397 #define	ISP_HA_FC_2100		0x10
398 #define	ISP_HA_FC_2200		0x20
399 
400 #define	IS_SCSI(isp)	(isp->isp_type & ISP_HA_SCSI)
401 #define	IS_1240(isp)	(isp->isp_type == ISP_HA_SCSI_1240)
402 #define	IS_1080(isp)	(isp->isp_type == ISP_HA_SCSI_1080)
403 #define	IS_1280(isp)	(isp->isp_type == ISP_HA_SCSI_1280)
404 #define	IS_12X0(isp)	\
405 	(isp->isp_type == ISP_HA_SCSI_1240 || isp->isp_type == ISP_HA_SCSI_1280)
406 #define	IS_DUALBUS(isp)	IS_12X0(isp)
407 #define	IS_ULTRA2(isp)	\
408 	(isp->isp_type == ISP_HA_SCSI_1080 || isp->isp_type == ISP_HA_SCSI_1280)
409 #define	IS_FC(isp)	(isp->isp_type & ISP_HA_FC)
410 
411 /*
412  * Function Prototypes
413  */
414 
415 /*
416  * Reset Hardware. Totally. Assumes that you'll follow this with
417  * a call to isp_init.
418  */
419 void isp_reset __P((struct ispsoftc *));
420 
421 /*
422  * Initialize Hardware to known state
423  */
424 void isp_init __P((struct ispsoftc *));
425 
426 /*
427  * Reset the ISP and call completion for any orphaned commands.
428  */
429 void isp_restart __P((struct ispsoftc *));
430 
431 /*
432  * Interrupt Service Routine
433  */
434 int isp_intr __P((void *));
435 
436 /*
437  * Command Entry Point
438  */
439 int32_t ispscsicmd __P((ISP_SCSI_XFER_T *));
440 
441 /*
442  * Platform Dependent to External to Internal Control Function
443  *
444  * Assumes all locks are held and that no reentrancy issues need be dealt with.
445  *
446  */
447 typedef enum {
448 	ISPCTL_RESET_BUS,		/* Reset Bus */
449 	ISPCTL_RESET_DEV,		/* Reset Device */
450 	ISPCTL_ABORT_CMD,		/* Abort Command */
451 	ISPCTL_UPDATE_PARAMS,		/* Update Operating Parameters */
452 	ISPCTL_FCLINK_TEST,		/* Test FC Link Status */
453 	ISPCTL_PDB_SYNC,		/* Synchronize Port Database */
454 	ISPCTL_TOGGLE_TMODE		/* toggle target mode */
455 } ispctl_t;
456 int isp_control __P((struct ispsoftc *, ispctl_t, void *));
457 
458 
459 /*
460  * Platform Dependent to Internal to External Control Function
461  * (each platform must provide such a function)
462  *
463  * Assumes all locks are held and that no reentrancy issues need be dealt with.
464  *
465  */
466 
467 typedef enum {
468 	ISPASYNC_NEW_TGT_PARAMS,
469 	ISPASYNC_BUS_RESET,		/* Bus Was Reset */
470 	ISPASYNC_LOOP_DOWN,		/* FC Loop Down */
471 	ISPASYNC_LOOP_UP,		/* FC Loop Up */
472 	ISPASYNC_PDB_CHANGED,		/* FC Port Data Base Changed */
473 	ISPASYNC_CHANGE_NOTIFY,		/* FC SNS Change Notification */
474 	ISPASYNC_FABRIC_DEV,		/* FC New Fabric Device */
475 	ISPASYNC_TARGET_MESSAGE,	/* target message */
476 	ISPASYNC_TARGET_EVENT,		/* target asynchronous event */
477 	ISPASYNC_TARGET_ACTION		/* other target command action */
478 } ispasync_t;
479 int isp_async __P((struct ispsoftc *, ispasync_t, void *));
480 
481 /*
482  * lost command routine (XXXX IN TRANSITION XXXX)
483  */
484 void isp_lostcmd __P((struct ispsoftc *, ISP_SCSI_XFER_T *));
485 
486 #endif	/* _ISPVAR_H */
487