1 /* $FreeBSD$ */ 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 4 * 5 * Copyright (c) 2009-2020 Alexander Motin <mav@FreeBSD.org> 6 * Copyright (c) 1997-2009 by Matthew Jacob 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 */ 32 /* 33 * Soft Definitions for Qlogic ISP SCSI adapters. 34 */ 35 36 #ifndef _ISPVAR_H 37 #define _ISPVAR_H 38 39 #if defined(__NetBSD__) || defined(__OpenBSD__) 40 #include <dev/ic/isp_stds.h> 41 #include <dev/ic/ispmbox.h> 42 #endif 43 #ifdef __FreeBSD__ 44 #include <dev/isp/isp_stds.h> 45 #include <dev/isp/ispmbox.h> 46 #endif 47 #ifdef __linux__ 48 #include "isp_stds.h" 49 #include "ispmbox.h" 50 #endif 51 #ifdef __svr4__ 52 #include "isp_stds.h" 53 #include "ispmbox.h" 54 #endif 55 56 #define ISP_CORE_VERSION_MAJOR 7 57 #define ISP_CORE_VERSION_MINOR 0 58 59 /* 60 * Vector for bus specific code to provide specific services. 61 */ 62 typedef struct ispsoftc ispsoftc_t; 63 struct ispmdvec { 64 void (*dv_run_isr) (ispsoftc_t *); 65 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 66 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 67 int (*dv_mbxdma) (ispsoftc_t *); 68 int (*dv_send_cmd) (ispsoftc_t *, void *, void *, uint32_t); 69 int (*dv_irqsetup) (ispsoftc_t *); 70 void (*dv_dregs) (ispsoftc_t *, const char *); 71 const void * dv_ispfw; /* ptr to f/w */ 72 }; 73 74 /* 75 * Overall parameters 76 */ 77 #define MAX_TARGETS 16 78 #ifndef MAX_FC_TARG 79 #define MAX_FC_TARG 1024 80 #endif 81 #define ISP_MAX_TARGETS(isp) MAX_FC_TARG 82 #define ISP_MAX_IRQS 3 83 84 /* 85 * Macros to access ISP registers through bus specific layers- 86 * mostly wrappers to vector through the mdvec structure. 87 */ 88 #define ISP_RUN_ISR(isp) \ 89 (*(isp)->isp_mdvec->dv_run_isr)(isp) 90 91 #define ISP_READ(isp, reg) \ 92 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 93 94 #define ISP_WRITE(isp, reg, val) \ 95 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 96 97 #define ISP_MBOXDMASETUP(isp) \ 98 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 99 100 #define ISP_SEND_CMD(isp, qe, segp, nseg) \ 101 (*(isp)->isp_mdvec->dv_send_cmd)((isp), (qe), (segp), (nseg)) 102 103 #define ISP_IRQSETUP(isp) \ 104 (((isp)->isp_mdvec->dv_irqsetup) ? (*(isp)->isp_mdvec->dv_irqsetup)(isp) : 0) 105 #define ISP_DUMPREGS(isp, m) \ 106 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 107 108 #define ISP_SETBITS(isp, reg, val) \ 109 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 110 111 #define ISP_CLRBITS(isp, reg, val) \ 112 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 113 114 /* 115 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 116 * on Request and Response Queues, Scratch DMA areas, and Registers) 117 * 118 * Defined Memory Barrier Synchronization Types 119 */ 120 #define SYNC_REQUEST 0 /* request queue synchronization */ 121 #define SYNC_RESULT 1 /* result queue synchronization */ 122 #define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 123 #define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 124 #define SYNC_REG 4 /* for registers */ 125 #define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 126 #define SYNC_IFORDEV 6 /* synchrounous IOCB, sync for ISP */ 127 #define SYNC_IFORCPU 7 /* synchrounous IOCB, sync for CPU */ 128 129 /* 130 * Request/Response Queue defines and macros. 131 */ 132 /* This is the size of a queue entry (request and response) */ 133 #define QENTRY_LEN 64 134 /* 135 * Hardware requires queue lengths of at least 8 elements. Driver requires 136 * lengths to be a power of two, and request queue of at least 256 elements. 137 */ 138 #define RQUEST_QUEUE_LEN(x) 8192 139 #define RESULT_QUEUE_LEN(x) 1024 140 #define ATIO_QUEUE_LEN(x) 1024 141 #define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((size_t)(idx) * QENTRY_LEN)) 142 #define ISP_QUEUE_SIZE(n) ((size_t)(n) * QENTRY_LEN) 143 #define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 144 #define ISP_QFREE(in, out, qlen) ((out - in - 1) & ((qlen) - 1)) 145 #define ISP_QAVAIL(isp) \ 146 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 147 148 #define ISP_ADD_REQUEST(isp, nxti) \ 149 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 150 ISP_WRITE(isp, BIU2400_REQINP, nxti); \ 151 isp->isp_reqidx = nxti 152 153 #define ISP_SYNC_REQUEST(isp) \ 154 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 155 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 156 ISP_WRITE(isp, BIU2400_REQINP, isp->isp_reqidx) 157 158 /* 159 * Fibre Channel Specifics 160 */ 161 #define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 162 #define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 163 #define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 164 #define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 165 #define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 166 #define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 167 #define NPH_MAX_2K 0x800 168 169 /* 170 * "Unassigned" handle to be used internally 171 */ 172 #define NIL_HANDLE 0xffff 173 174 /* 175 * Limit for devices on an arbitrated loop. 176 */ 177 #define LOCAL_LOOP_LIM 126 178 179 /* 180 * Limit for (2K login) N-port handle amounts 181 */ 182 #define MAX_NPORT_HANDLE 2048 183 184 /* 185 * Special Constants 186 */ 187 #define INI_NONE ((uint64_t) 0) 188 #define ISP_NOCHAN 0xff 189 190 /* 191 * Special Port IDs 192 */ 193 #define MANAGEMENT_PORT_ID 0xFFFFFA 194 #define SNS_PORT_ID 0xFFFFFC 195 #define FABRIC_PORT_ID 0xFFFFFE 196 #define PORT_ANY 0xFFFFFF 197 #define PORT_NONE 0 198 #define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 199 #define DOMAIN_CONTROLLER_BASE 0xFFFC00 200 #define DOMAIN_CONTROLLER_END 0xFFFCFF 201 202 /* 203 * Command Handles 204 * 205 * Most QLogic initiator or target have 32 bit handles associated with them. 206 * We want to have a quick way to index back and forth between a local SCSI 207 * command context and what the firmware is passing back to us. We also 208 * want to avoid working on stale information. This structure handles both 209 * at the expense of some local memory. 210 * 211 * The handle is architected thusly: 212 * 213 * 0 means "free handle" 214 * bits 0..12 index commands 215 * bits 13..15 bits index usage 216 * bits 16..31 contain a rolling sequence 217 * 218 * 219 */ 220 typedef struct { 221 void * cmd; /* associated command context */ 222 uint32_t handle; /* handle associated with this command */ 223 } isp_hdl_t; 224 #define ISP_HANDLE_FREE 0x00000000 225 #define ISP_HANDLE_CMD_MASK 0x00003fff 226 #define ISP_HANDLE_USAGE_MASK 0x0000c000 227 #define ISP_HANDLE_USAGE_SHIFT 14 228 #define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 229 # define ISP_HANDLE_NONE 0 230 # define ISP_HANDLE_INITIATOR 1 231 # define ISP_HANDLE_TARGET 2 232 # define ISP_HANDLE_CTRL 3 233 #define ISP_HANDLE_SEQ_MASK 0xffff0000 234 #define ISP_HANDLE_SEQ_SHIFT 16 235 #define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 236 #define ISP_HANDLE_MAX (ISP_HANDLE_CMD_MASK + 1) 237 #define ISP_HANDLE_RESERVE 256 238 #define ISP_HANDLE_NUM(isp) ((isp)->isp_maxcmds + ISP_HANDLE_RESERVE) 239 #define ISP_VALID_HANDLE(isp, hdl) \ 240 ((ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR || \ 241 ISP_H2HT(hdl) == ISP_HANDLE_TARGET || \ 242 ISP_H2HT(hdl) == ISP_HANDLE_CTRL) && \ 243 ((hdl) & ISP_HANDLE_CMD_MASK) < ISP_HANDLE_NUM(isp) && \ 244 (hdl) == ((isp)->isp_xflist[(hdl) & ISP_HANDLE_CMD_MASK].handle)) 245 246 247 /* 248 * FC Port Database entry. 249 * 250 * It has a handle that the f/w uses to address commands to a device. 251 * This handle's value may be assigned by the firmware (e.g., for local loop 252 * devices) or by the driver (e.g., for fabric devices). 253 * 254 * It has a state. If the state if VALID, that means that we've logged into 255 * the device. 256 * 257 * Local loop devices the firmware automatically performs PLOGI on for us 258 * (which is why that handle is imposed upon us). Fabric devices we assign 259 * a handle to and perform the PLOGI on. 260 * 261 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 262 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 263 * of devices whose handles change but are otherwise the same device (and 264 * thus keep 'target' constant). 265 * 266 * In any case, we search all possible local loop handles. For each one that 267 * has a port database entity returned, we search for any PROBATIONAL entry 268 * that matches it and update as appropriate. Otherwise, as a new entry, we 269 * find room for it in the Port Database. We *try* and use the handle as the 270 * index to put it into the Database, but that's just an optimization. We mark 271 * the entry VALID and make sure that the target index is updated and correct. 272 * 273 * When we get done searching the local loop, we then search similarly for 274 * a list of devices we've gotten from the fabric name controller (if we're 275 * on a fabric). VALID marking is also done similarly. 276 * 277 * When all of this is done, we can march through the database and clean up 278 * any entry that is still PROBATIONAL (these represent devices which have 279 * departed). Then we're done and can resume normal operations. 280 * 281 * Negative invariants that we try and test for are: 282 * 283 * + There can never be two non-NIL entries with the same { Port, Node } WWN 284 * duples. 285 * 286 * + There can never be two non-NIL entries with the same handle. 287 */ 288 typedef struct { 289 /* 290 * This is the handle that the firmware needs in order for us to 291 * send commands to the device. For pre-24XX cards, this would be 292 * the 'loopid'. 293 */ 294 uint16_t handle; 295 296 /* 297 * PRLI word 0 contains the Establish Image Pair bit, which is 298 * important for knowing when to reset the CRN. 299 * 300 * PRLI word 3 parameters contains role as well as other things. 301 * 302 * The state is the current state of this entry. 303 * 304 * The is_target is the current state of target on this port. 305 * 306 * The is_initiator is the current state of initiator on this port. 307 * 308 * Portid is obvious, as are node && port WWNs. The new_role and 309 * new_portid is for when we are pending a change. 310 */ 311 uint16_t prli_word0; /* PRLI parameters */ 312 uint16_t prli_word3; /* PRLI parameters */ 313 uint16_t new_prli_word0; /* Incoming new PRLI parameters */ 314 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 315 uint16_t : 12, 316 probational : 1, 317 state : 3; 318 uint32_t : 6, 319 is_target : 1, 320 is_initiator : 1, 321 portid : 24; 322 uint32_t 323 : 8, 324 new_portid : 24; 325 uint64_t node_wwn; 326 uint64_t port_wwn; 327 uint32_t gone_timer; 328 } fcportdb_t; 329 330 #define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 331 #define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 332 #define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 333 #define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 334 #define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 335 #define FC_PORTDB_STATE_VALID 5 /* Valid */ 336 337 #define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 338 339 /* 340 * FC card specific information 341 * 342 * This structure is replicated across multiple channels for multi-id 343 * capapble chipsets, with some entities different on a per-channel basis. 344 */ 345 346 typedef struct { 347 int isp_gbspeed; /* Connection speed */ 348 int isp_linkstate; /* Link state */ 349 int isp_fwstate; /* ISP F/W state */ 350 int isp_loopstate; /* Loop State */ 351 int isp_topo; /* Connection Type */ 352 353 uint32_t : 4, 354 fctape_enabled : 1, 355 sendmarker : 1, 356 role : 2, 357 isp_portid : 24; /* S_ID */ 358 359 uint16_t isp_fwoptions; 360 uint16_t isp_xfwoptions; 361 uint16_t isp_zfwoptions; 362 uint16_t isp_loopid; /* hard loop id */ 363 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 364 uint16_t isp_lasthdl; /* only valid for channel 0 */ 365 uint16_t isp_fabric_params; 366 uint16_t isp_login_hdl; /* Logging in handle */ 367 uint8_t isp_retry_delay; 368 uint8_t isp_retry_count; 369 int isp_use_gft_id; /* Use GFT_ID */ 370 int isp_use_gff_id; /* Use GFF_ID */ 371 372 /* 373 * Current active WWNN/WWPN 374 */ 375 uint64_t isp_wwnn; 376 uint64_t isp_wwpn; 377 378 /* 379 * NVRAM WWNN/WWPN 380 */ 381 uint64_t isp_wwnn_nvram; 382 uint64_t isp_wwpn_nvram; 383 384 /* 385 * Our Port Data Base 386 */ 387 fcportdb_t portdb[MAX_FC_TARG]; 388 389 /* 390 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 391 */ 392 void * isp_scratch; 393 XS_DMA_ADDR_T isp_scdma; 394 395 uint8_t isp_scanscratch[ISP_FC_SCRLEN]; 396 } fcparam; 397 398 #define FW_CONFIG_WAIT 0 399 #define FW_WAIT_LINK 1 400 #define FW_WAIT_LOGIN 2 401 #define FW_READY 3 402 #define FW_LOSS_OF_SYNC 4 403 #define FW_ERROR 5 404 #define FW_REINIT 6 405 #define FW_NON_PART 7 406 407 #define LOOP_NIL 0 408 #define LOOP_HAVE_LINK 1 409 #define LOOP_HAVE_ADDR 2 410 #define LOOP_TESTING_LINK 3 411 #define LOOP_LTEST_DONE 4 412 #define LOOP_SCANNING_LOOP 5 413 #define LOOP_LSCAN_DONE 6 414 #define LOOP_SCANNING_FABRIC 7 415 #define LOOP_FSCAN_DONE 8 416 #define LOOP_SYNCING_PDB 9 417 #define LOOP_READY 10 418 419 #define TOPO_NL_PORT 0 420 #define TOPO_FL_PORT 1 421 #define TOPO_N_PORT 2 422 #define TOPO_F_PORT 3 423 #define TOPO_PTP_STUB 4 424 425 #define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 426 427 #define FCP_AL_DA_ALL 0xFF 428 #define FCP_AL_PA(fcp) ((uint8_t)(fcp->isp_portid)) 429 #define FCP_IS_DEST_ALPD(fcp, alpd) (FCP_AL_PA((fcp)) == FCP_AL_DA_ALL || FCP_AL_PA((fcp)) == alpd) 430 431 /* 432 * Soft Structure per host adapter 433 */ 434 struct ispsoftc { 435 /* 436 * Platform (OS) specific data 437 */ 438 struct isposinfo isp_osinfo; 439 440 /* 441 * Pointer to bus specific functions and data 442 */ 443 struct ispmdvec * isp_mdvec; 444 445 /* 446 * (Mostly) nonvolatile state. Board specific parameters 447 * may contain some volatile state (e.g., current loop state). 448 */ 449 450 fcparam *isp_param; /* Per-channel storage. */ 451 uint64_t isp_fwattr; /* firmware attributes */ 452 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 453 uint16_t isp_maxcmds; /* max possible I/O cmds */ 454 uint16_t isp_nchan; /* number of channels */ 455 uint16_t isp_dblev; /* debug log mask */ 456 uint8_t isp_type; /* HBA Chip Type */ 457 uint8_t isp_revision; /* HBA Chip H/W Revision */ 458 uint8_t isp_nirq; /* number of IRQs */ 459 uint8_t isp_port; /* physical port on a card */ 460 uint32_t isp_confopts; /* config options */ 461 462 /* 463 * Volatile state 464 */ 465 volatile u_int isp_mboxbsy; /* mailbox command active */ 466 volatile u_int isp_state; 467 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 468 volatile uint32_t isp_reqidx; /* index of next request */ 469 volatile uint32_t isp_resodx; /* index of next result */ 470 volatile uint32_t isp_atioodx; /* index of next ATIO */ 471 volatile uint32_t isp_obits; /* mailbox command output */ 472 volatile uint32_t isp_serno; /* rolling serial number */ 473 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 474 volatile uint16_t isp_seqno; /* running sequence number */ 475 u_int isp_rqovf; /* request queue overflow */ 476 477 /* 478 * Active commands are stored here, indexed by handle functions. 479 */ 480 isp_hdl_t *isp_xflist; 481 isp_hdl_t *isp_xffree; 482 483 /* 484 * DMA mapped in area for synchronous IOCB requests. 485 */ 486 void * isp_iocb; 487 XS_DMA_ADDR_T isp_iocb_dma; 488 489 /* 490 * request/result queue pointers and DMA handles for them. 491 */ 492 void * isp_rquest; 493 void * isp_result; 494 XS_DMA_ADDR_T isp_rquest_dma; 495 XS_DMA_ADDR_T isp_result_dma; 496 #ifdef ISP_TARGET_MODE 497 /* for 24XX only */ 498 void * isp_atioq; 499 XS_DMA_ADDR_T isp_atioq_dma; 500 #endif 501 }; 502 503 #define FCPARAM(isp, chan) (&(isp)->isp_param[(chan)]) 504 505 #define ISP_SET_SENDMARKER(isp, chan, val) \ 506 FCPARAM(isp, chan)->sendmarker = val \ 507 508 #define ISP_TST_SENDMARKER(isp, chan) \ 509 (FCPARAM(isp, chan)->sendmarker != 0) 510 511 /* 512 * ISP Driver Run States 513 */ 514 #define ISP_NILSTATE 0 515 #define ISP_CRASHED 1 516 #define ISP_RESETSTATE 2 517 #define ISP_INITSTATE 3 518 #define ISP_RUNSTATE 4 519 520 /* 521 * ISP Runtime Configuration Options 522 */ 523 #define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 524 #define ISP_CFG_PORT_PREF 0x0e /* Mask for Port Prefs (all FC except 2100) */ 525 #define ISP_CFG_PORT_DEF 0x00 /* prefer connection type from NVRAM */ 526 #define ISP_CFG_LPORT_ONLY 0x02 /* insist on {N/F}L-Port connection */ 527 #define ISP_CFG_NPORT_ONLY 0x04 /* insist on {N/F}-Port connection */ 528 #define ISP_CFG_LPORT 0x06 /* prefer {N/F}L-Port connection */ 529 #define ISP_CFG_NPORT 0x08 /* prefer {N/F}-Port connection */ 530 #define ISP_CFG_1GB 0x10 /* force 1Gb connection (23XX only) */ 531 #define ISP_CFG_2GB 0x20 /* force 2Gb connection (23XX only) */ 532 #define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 533 #define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 534 #define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 535 #define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 536 #define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 537 #define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 538 #define ISP_CFG_4GB 0x2000 /* force 4Gb connection (24XX only) */ 539 #define ISP_CFG_8GB 0x4000 /* force 8Gb connection (25XX only) */ 540 #define ISP_CFG_16GB 0x8000 /* force 16Gb connection (26XX only) */ 541 #define ISP_CFG_32GB 0x10000 /* force 32Gb connection (27XX only) */ 542 543 /* 544 * For each channel, the outer layers should know what role that channel 545 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 546 * ISP_ROLE_BOTH. 547 * 548 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 549 * NVRAM read, and defaults set, but any further initialization (e.g. 550 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 551 * 552 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 553 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 554 * 555 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 556 * needs to be enabled, or will even work. What happens with the 2X00 cards 557 * here is that if you have enabled it with TARGET MODE as part of the ICB 558 * options, but you haven't given the f/w any ram resources for ATIOs or 559 * Immediate Notifies, the f/w just handles what it can and you never see 560 * anything. Basically, it sends a single byte of data (the first byte, 561 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 562 * INQUIRY, and sends back QUEUE FULL status for any other command. 563 * 564 */ 565 #define ISP_ROLE_NONE 0x0 566 #define ISP_ROLE_TARGET 0x1 567 #define ISP_ROLE_INITIATOR 0x2 568 #define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 569 #define ISP_ROLE_EITHER ISP_ROLE_BOTH 570 #ifndef ISP_DEFAULT_ROLES 571 /* 572 * Counterintuitively, we prefer to default to role 'none' 573 * if we are enable target mode support. This gives us the 574 * maximum flexibility as to which port will do what. 575 */ 576 #ifdef ISP_TARGET_MODE 577 #define ISP_DEFAULT_ROLES ISP_ROLE_NONE 578 #else 579 #define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 580 #endif 581 #endif 582 583 584 /* 585 * Firmware related defines 586 */ 587 #define ISP_CODE_ORG 0x1000 /* default f/w code start */ 588 #define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 589 #define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 590 #define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 591 #define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 592 #define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 593 #define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 594 #define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 595 #define ISP_FW_MAJORX(xp) (xp[0]) 596 #define ISP_FW_MINORX(xp) (xp[1]) 597 #define ISP_FW_MICROX(xp) (xp[2]) 598 #define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 599 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 600 #define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 601 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 602 603 /* 604 * Chip Types 605 */ 606 #define ISP_HA_FC_2400 0x04 607 #define ISP_HA_FC_2500 0x05 608 #define ISP_HA_FC_2600 0x06 609 #define ISP_HA_FC_2700 0x07 610 611 #define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 612 #define IS_26XX(isp) ((isp)->isp_type >= ISP_HA_FC_2600) 613 #define IS_27XX(isp) ((isp)->isp_type >= ISP_HA_FC_2700) 614 615 /* 616 * DMA related macros 617 */ 618 #define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 619 #define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 620 #define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 621 #define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 622 623 #define DMA_LO32(x) ((uint32_t) (x)) 624 #define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 625 626 /* 627 * Core System Function Prototypes 628 */ 629 630 /* 631 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 632 */ 633 void isp_reset(ispsoftc_t *, int); 634 635 /* 636 * Initialize Hardware to known state 637 */ 638 void isp_init(ispsoftc_t *); 639 640 /* 641 * Reset the ISP and call completion for any orphaned commands. 642 */ 643 int isp_reinit(ispsoftc_t *, int); 644 645 /* 646 * Shutdown hardware after use. 647 */ 648 void isp_shutdown(ispsoftc_t *); 649 650 /* 651 * Internal Interrupt Service Routine 652 */ 653 #ifdef ISP_TARGET_MODE 654 void isp_intr_atioq(ispsoftc_t *); 655 #endif 656 void isp_intr_async(ispsoftc_t *, uint16_t event); 657 void isp_intr_mbox(ispsoftc_t *, uint16_t mbox0); 658 void isp_intr_respq(ispsoftc_t *); 659 660 661 /* 662 * Command Entry Point- Platform Dependent layers call into this 663 */ 664 int isp_start(XS_T *); 665 666 /* these values are what isp_start returns */ 667 #define CMD_COMPLETE 101 /* command completed */ 668 #define CMD_EAGAIN 102 /* busy- maybe retry later */ 669 #define CMD_RQLATER 103 /* requeue this command later */ 670 671 /* 672 * Command Completion Point- Core layers call out from this with completed cmds 673 */ 674 void isp_done(XS_T *); 675 676 /* 677 * Platform Dependent to External to Internal Control Function 678 * 679 * Assumes locks are held on entry. You should note that with many of 680 * these commands locks may be released while this function is called. 681 * 682 * ... ISPCTL_RESET_BUS, int channel); 683 * Reset BUS on this channel 684 * ... ISPCTL_RESET_DEV, int channel, int target); 685 * Reset Device on this channel at this target. 686 * ... ISPCTL_ABORT_CMD, XS_T *xs); 687 * Abort active transaction described by xs. 688 * ... IPCTL_UPDATE_PARAMS); 689 * Update any operating parameters (speed, etc.) 690 * ... ISPCTL_FCLINK_TEST, int channel); 691 * Test FC link status on this channel 692 * ... ISPCTL_SCAN_LOOP, int channel); 693 * Scan local loop on this channel 694 * ... ISPCTL_SCAN_FABRIC, int channel); 695 * Scan fabric on this channel 696 * ... ISPCTL_PDB_SYNC, int channel); 697 * Synchronize port database on this channel 698 * ... ISPCTL_SEND_LIP, int channel); 699 * Send a LIP on this channel 700 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 701 * Get a WWNN/WWPN for this N-port handle on this channel 702 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 703 * Run this mailbox command 704 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 705 * Get PDB on this channel for this N-port handle 706 * ... ISPCTL_PLOGX, isp_plcmd_t *) 707 * Performa a port login/logout 708 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 709 * Change role of specified channel 710 * 711 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 712 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 713 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 714 * and logging out of fabric devices (if one is on a fabric) and then marking 715 * the 'loop state' as being ready to now be used for sending commands to 716 * devices. 717 */ 718 typedef enum { 719 ISPCTL_RESET_BUS, 720 ISPCTL_RESET_DEV, 721 ISPCTL_ABORT_CMD, 722 ISPCTL_UPDATE_PARAMS, 723 ISPCTL_FCLINK_TEST, 724 ISPCTL_SCAN_FABRIC, 725 ISPCTL_SCAN_LOOP, 726 ISPCTL_PDB_SYNC, 727 ISPCTL_SEND_LIP, 728 ISPCTL_GET_NAMES, 729 ISPCTL_RUN_MBOXCMD, 730 ISPCTL_GET_PDB, 731 ISPCTL_PLOGX, 732 ISPCTL_CHANGE_ROLE 733 } ispctl_t; 734 int isp_control(ispsoftc_t *, ispctl_t, ...); 735 736 /* 737 * Platform Dependent to Internal to External Control Function 738 */ 739 740 typedef enum { 741 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 742 ISPASYNC_LOOP_UP, /* FC Loop Up */ 743 ISPASYNC_LIP, /* FC LIP Received */ 744 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 745 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 746 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 747 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 748 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 749 ISPASYNC_DEV_GONE, /* FC Device Departure */ 750 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 751 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 752 ISPASYNC_TARGET_ACTION, /* All target action requested */ 753 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 754 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 755 } ispasync_t; 756 void isp_async(ispsoftc_t *, ispasync_t, ...); 757 758 #define ISPASYNC_CHANGE_PDB 0 759 #define ISPASYNC_CHANGE_SNS 1 760 #define ISPASYNC_CHANGE_OTHER 2 761 762 /* 763 * Platform Dependent Error and Debug Printout 764 * 765 * Two required functions for each platform must be provided: 766 * 767 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 768 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 769 * 770 * but due to compiler differences on different platforms this won't be 771 * formally defined here. Instead, they go in each platform definition file. 772 */ 773 774 #define ISP_LOGALL 0x0 /* log always */ 775 #define ISP_LOGCONFIG 0x1 /* log configuration messages */ 776 #define ISP_LOGINFO 0x2 /* log informational messages */ 777 #define ISP_LOGWARN 0x4 /* log warning messages */ 778 #define ISP_LOGERR 0x8 /* log error messages */ 779 #define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 780 #define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 781 #define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 782 #define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 783 #define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 784 #define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 785 #define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 786 #define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 787 #define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 788 #define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 789 #define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 790 791 /* 792 * Each Platform provides it's own isposinfo substructure of the ispsoftc 793 * defined above. 794 * 795 * Each platform must also provide the following macros/defines: 796 * 797 * 798 * ISP_FC_SCRLEN FC scratch area DMA length 799 * 800 * ISP_MEMZERO(dst, src) platform zeroing function 801 * ISP_MEMCPY(dst, src, count) platform copying function 802 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 803 * ISP_DELAY(usecs) microsecond spindelay function 804 * ISP_SLEEP(isp, usecs) microsecond sleep function 805 * 806 * ISP_INLINE ___inline or not- depending on how 807 * good your debugger is 808 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 809 * 810 * NANOTIME_T nanosecond time type 811 * 812 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 813 * 814 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 815 * 816 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 817 * subtract two NANOTIME_T values 818 * 819 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 820 * for this particular board type 821 * 822 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 823 * 824 * Function/Macro the provides memory synchronization on 825 * various objects so that the ISP's and the system's view 826 * of the same object is consistent. 827 * 828 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 829 * return -1 if you cannot 830 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 831 * 832 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 833 * 834 * SCSI_GOOD SCSI 'Good' Status 835 * SCSI_CHECK SCSI 'Check Condition' Status 836 * SCSI_BUSY SCSI 'Busy' Status 837 * SCSI_QFULL SCSI 'Queue Full' Status 838 * 839 * XS_T Platform SCSI transaction type (i.e., command for HBA) 840 * XS_DMA_ADDR_T Platform PCI DMA Address Type 841 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 842 * XS_ISP(xs) gets an instance out of an XS_T 843 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 844 * XS_TGT(xs) gets the target "" 845 * XS_LUN(xs) gets the lun "" 846 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 847 * XS_CDBLEN(xs) gets the CDB's length "" 848 * XS_XFRLEN(xs) gets the associated data transfer length "" 849 * XS_XFRIN(xs) gets IN direction 850 * XS_XFROUT(xs) gets OUT direction 851 * XS_TIME(xs) gets the time (in seconds) for this command 852 * XS_GET_RESID(xs) gets the current residual count 853 * XS_GET_RESID(xs, resid) sets the current residual count 854 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 855 * XS_SNSP(xs) gets a pointer to the associate sense data 856 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 857 * XS_CUR_SNSLEN(xs) gets the currently used length of sense data storage 858 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 859 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 860 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 861 * XS_TAG_P(xs) predicate of whether this command should be tagged 862 * XS_TAG_TYPE(xs) which type of tag to use 863 * XS_PRIORITY(xs) command priority for SIMPLE tag 864 * XS_SETERR(xs) set error state 865 * 866 * HBA_NOERROR command has no erros 867 * HBA_BOTCH hba botched something 868 * HBA_CMDTIMEOUT command timed out 869 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 870 * HBA_TGTBSY target returned a BUSY status 871 * HBA_BUSRESET bus reset destroyed command 872 * HBA_ABORTED command was aborted (by request) 873 * HBA_DATAOVR a data overrun was detected 874 * HBA_ARQFAIL Automatic Request Sense failed 875 * 876 * XS_ERR(xs) return current error state 877 * XS_NOERR(xs) there is no error currently set 878 * XS_INITERR(xs) initialize error state 879 * 880 * XS_SAVE_SENSE(xs, sp, len) save sense data 881 * XS_APPEND_SENSE(xs, sp, len) append more sense data 882 * 883 * XS_SENSE_VALID(xs) indicates whether sense is valid 884 * 885 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 886 * 887 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 888 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 889 * 890 * These establish reasonable defaults for each platform. 891 * These must be available independent of card NVRAM and are 892 * to be used should NVRAM not be readable. 893 * 894 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 895 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 896 * 897 * These defines are hooks to allow the setting of node and 898 * port WWNs when NVRAM cannot be read or is to be overridden. 899 * 900 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 901 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 902 * 903 * After NVRAM is read, these will be invoked to get the 904 * node and port WWNs that will actually be used for this 905 * channel. 906 * 907 * 908 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 909 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 910 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 911 * 912 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 913 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 914 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 915 * 916 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 917 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 918 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 919 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 920 */ 921 922 #ifdef ISP_TARGET_MODE 923 /* 924 * The functions below are for the publicly available 925 * target mode functions that are internal to the Qlogic driver. 926 */ 927 928 /* 929 * This function handles new response queue entry appropriate for target mode. 930 */ 931 int isp_target_notify(ispsoftc_t *, void *, uint32_t *, uint16_t); 932 933 /* 934 * This function externalizes the ability to acknowledge an Immediate Notify request. 935 */ 936 int isp_notify_ack(ispsoftc_t *, void *); 937 938 /* 939 * This function externalized acknowledging (success/fail) an ABTS frame 940 */ 941 int isp_acknak_abts(ispsoftc_t *, void *, int); 942 943 /* 944 * General routine to send a final CTIO for a command- used mostly for 945 * local responses. 946 */ 947 int isp_endcmd(ispsoftc_t *, ...); 948 #define ECMD_SVALID 0x100 949 #define ECMD_RVALID 0x200 950 #define ECMD_TERMINATE 0x400 951 952 /* 953 * Handle an asynchronous event 954 */ 955 void isp_target_async(ispsoftc_t *, int, int); 956 #endif 957 #endif /* _ISPVAR_H */ 958