1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1997-2009 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 */ 29 /* 30 * Soft Definitions for for Qlogic ISP SCSI adapters. 31 */ 32 33 #ifndef _ISPVAR_H 34 #define _ISPVAR_H 35 36 #if defined(__NetBSD__) || defined(__OpenBSD__) 37 #include <dev/ic/isp_stds.h> 38 #include <dev/ic/ispmbox.h> 39 #endif 40 #ifdef __FreeBSD__ 41 #include <dev/isp/isp_stds.h> 42 #include <dev/isp/ispmbox.h> 43 #endif 44 #ifdef __linux__ 45 #include "isp_stds.h" 46 #include "ispmbox.h" 47 #endif 48 #ifdef __svr4__ 49 #include "isp_stds.h" 50 #include "ispmbox.h" 51 #endif 52 53 #define ISP_CORE_VERSION_MAJOR 7 54 #define ISP_CORE_VERSION_MINOR 0 55 56 /* 57 * Vector for bus specific code to provide specific services. 58 */ 59 typedef struct ispsoftc ispsoftc_t; 60 struct ispmdvec { 61 int (*dv_rd_isr) (ispsoftc_t *, uint16_t *, uint16_t *, uint16_t *); 62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 64 int (*dv_mbxdma) (ispsoftc_t *); 65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *); 66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t); 67 void (*dv_reset0) (ispsoftc_t *); 68 void (*dv_reset1) (ispsoftc_t *); 69 void (*dv_dregs) (ispsoftc_t *, const char *); 70 const void * dv_ispfw; /* ptr to f/w */ 71 uint16_t dv_conf1; 72 uint16_t dv_clock; /* clock frequency */ 73 }; 74 75 /* 76 * Overall parameters 77 */ 78 #define MAX_TARGETS 16 79 #ifndef MAX_FC_TARG 80 #define MAX_FC_TARG 1024 81 #endif 82 #define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 83 #define ISP_MAX_LUNS(isp) (isp)->isp_maxluns 84 85 /* 86 * Macros to access ISP registers through bus specific layers- 87 * mostly wrappers to vector through the mdvec structure. 88 */ 89 #define ISP_READ_ISR(isp, isrp, semap, info) \ 90 (*(isp)->isp_mdvec->dv_rd_isr)(isp, isrp, semap, info) 91 92 #define ISP_READ(isp, reg) \ 93 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 94 95 #define ISP_WRITE(isp, reg, val) \ 96 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 97 98 #define ISP_MBOXDMASETUP(isp) \ 99 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 100 101 #define ISP_DMASETUP(isp, xs, req) \ 102 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req)) 103 104 #define ISP_DMAFREE(isp, xs, hndl) \ 105 if ((isp)->isp_mdvec->dv_dmaclr) \ 106 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 107 108 #define ISP_RESET0(isp) \ 109 if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp)) 110 #define ISP_RESET1(isp) \ 111 if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp)) 112 #define ISP_DUMPREGS(isp, m) \ 113 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 114 115 #define ISP_SETBITS(isp, reg, val) \ 116 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 117 118 #define ISP_CLRBITS(isp, reg, val) \ 119 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 120 121 /* 122 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 123 * on Request and Response Queues, Scratch DMA areas, and Registers) 124 * 125 * Defined Memory Barrier Synchronization Types 126 */ 127 #define SYNC_REQUEST 0 /* request queue synchronization */ 128 #define SYNC_RESULT 1 /* result queue synchronization */ 129 #define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 130 #define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 131 #define SYNC_REG 4 /* for registers */ 132 #define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 133 #define SYNC_IFORDEV 6 /* synchrounous IOCB, sync for ISP */ 134 #define SYNC_IFORCPU 7 /* synchrounous IOCB, sync for CPU */ 135 136 /* 137 * Request/Response Queue defines and macros. 138 * The maximum is defined per platform (and can be based on board type). 139 */ 140 /* This is the size of a queue entry (request and response) */ 141 #define QENTRY_LEN 64 142 /* Both request and result queue length must be a power of two */ 143 #define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x) 144 #ifdef ISP_TARGET_MODE 145 #define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x) 146 #else 147 #define RESULT_QUEUE_LEN(x) \ 148 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2) 149 #endif 150 #define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN)) 151 #define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 152 #define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 153 #define ISP_QFREE(in, out, qlen) \ 154 ((in == out)? (qlen - 1) : ((in > out)? \ 155 ((qlen - 1) - (in - out)) : (out - in - 1))) 156 #define ISP_QAVAIL(isp) \ 157 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 158 159 #define ISP_ADD_REQUEST(isp, nxti) \ 160 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 161 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \ 162 isp->isp_reqidx = nxti 163 164 #define ISP_SYNC_REQUEST(isp) \ 165 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 166 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 167 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx) 168 169 /* 170 * SCSI Specific Host Adapter Parameters- per bus, per target 171 */ 172 typedef struct { 173 uint32_t : 8, 174 update : 1, 175 sendmarker : 1, 176 isp_req_ack_active_neg : 1, 177 isp_data_line_active_neg: 1, 178 isp_cmd_dma_burst_enable: 1, 179 isp_data_dma_burst_enabl: 1, 180 isp_fifo_threshold : 3, 181 isp_ptisp : 1, 182 isp_ultramode : 1, 183 isp_diffmode : 1, 184 isp_lvdmode : 1, 185 isp_fast_mttr : 1, /* fast sram */ 186 isp_initiator_id : 4, 187 isp_async_data_setup : 4; 188 uint16_t isp_selection_timeout; 189 uint16_t isp_max_queue_depth; 190 uint8_t isp_tag_aging; 191 uint8_t isp_bus_reset_delay; 192 uint8_t isp_retry_count; 193 uint8_t isp_retry_delay; 194 struct { 195 uint32_t 196 exc_throttle : 8, 197 : 1, 198 dev_enable : 1, /* ignored */ 199 dev_update : 1, 200 dev_refresh : 1, 201 actv_offset : 4, 202 goal_offset : 4, 203 nvrm_offset : 4; 204 uint8_t actv_period; /* current sync period */ 205 uint8_t goal_period; /* goal sync period */ 206 uint8_t nvrm_period; /* nvram sync period */ 207 uint16_t actv_flags; /* current device flags */ 208 uint16_t goal_flags; /* goal device flags */ 209 uint16_t nvrm_flags; /* nvram device flags */ 210 } isp_devparam[MAX_TARGETS]; 211 } sdparam; 212 213 /* 214 * Device Flags 215 */ 216 #define DPARM_DISC 0x8000 217 #define DPARM_PARITY 0x4000 218 #define DPARM_WIDE 0x2000 219 #define DPARM_SYNC 0x1000 220 #define DPARM_TQING 0x0800 221 #define DPARM_ARQ 0x0400 222 #define DPARM_QFRZ 0x0200 223 #define DPARM_RENEG 0x0100 224 #define DPARM_NARROW 0x0080 225 #define DPARM_ASYNC 0x0040 226 #define DPARM_PPR 0x0020 227 #define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 228 #define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 229 230 /* technically, not really correct, as they need to be rated based upon clock */ 231 #define ISP_80M_SYNCPARMS 0x0c09 232 #define ISP_40M_SYNCPARMS 0x0c0a 233 #define ISP_20M_SYNCPARMS 0x0c0c 234 #define ISP_20M_SYNCPARMS_1040 0x080c 235 #define ISP_10M_SYNCPARMS 0x0c19 236 #define ISP_08M_SYNCPARMS 0x0c25 237 #define ISP_05M_SYNCPARMS 0x0c32 238 #define ISP_04M_SYNCPARMS 0x0c41 239 240 /* 241 * Fibre Channel Specifics 242 */ 243 /* These are for non-2K Login Firmware cards */ 244 #define FL_ID 0x7e /* FL_Port Special ID */ 245 #define SNS_ID 0x80 /* SNS Server Special ID */ 246 #define NPH_MAX 0xfe 247 248 /* These are for 2K Login Firmware cards */ 249 #define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 250 #define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 251 #define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 252 #define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 253 #define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 254 #define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 255 #define NPH_MAX_2K 0x800 256 257 /* 258 * "Unassigned" handle to be used internally 259 */ 260 #define NIL_HANDLE 0xffff 261 262 /* 263 * Limit for devices on an arbitrated loop. 264 */ 265 #define LOCAL_LOOP_LIM 126 266 267 /* 268 * Limit for (2K login) N-port handle amounts 269 */ 270 #define MAX_NPORT_HANDLE 2048 271 272 /* 273 * Special Constants 274 */ 275 #define INI_NONE ((uint64_t) 0) 276 #define ISP_NOCHAN 0xff 277 278 /* 279 * Special Port IDs 280 */ 281 #define MANAGEMENT_PORT_ID 0xFFFFFA 282 #define SNS_PORT_ID 0xFFFFFC 283 #define FABRIC_PORT_ID 0xFFFFFE 284 #define PORT_ANY 0xFFFFFF 285 #define PORT_NONE 0 286 #define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 287 #define DOMAIN_CONTROLLER_BASE 0xFFFC00 288 #define DOMAIN_CONTROLLER_END 0xFFFCFF 289 290 /* 291 * Command Handles 292 * 293 * Most QLogic initiator or target have 32 bit handles associated with them. 294 * We want to have a quick way to index back and forth between a local SCSI 295 * command context and what the firmware is passing back to us. We also 296 * want to avoid working on stale information. This structure handles both 297 * at the expense of some local memory. 298 * 299 * The handle is architected thusly: 300 * 301 * 0 means "free handle" 302 * bits 0..12 index commands 303 * bits 13..15 bits index usage 304 * bits 16..31 contain a rolling sequence 305 * 306 * 307 */ 308 typedef struct { 309 void * cmd; /* associated command context */ 310 uint32_t handle; /* handle associated with this command */ 311 } isp_hdl_t; 312 #define ISP_HANDLE_FREE 0x00000000 313 #define ISP_HANDLE_CMD_MASK 0x00001fff 314 #define ISP_HANDLE_USAGE_MASK 0x0000e000 315 #define ISP_HANDLE_USAGE_SHIFT 13 316 #define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 317 # define ISP_HANDLE_NONE 0 318 # define ISP_HANDLE_INITIATOR 1 319 # define ISP_HANDLE_TARGET 2 320 # define ISP_HANDLE_CTRL 3 321 #define ISP_HANDLE_SEQ_MASK 0xffff0000 322 #define ISP_HANDLE_SEQ_SHIFT 16 323 #define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 324 #define ISP_VALID_HANDLE(c, hdl) \ 325 ((ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR || \ 326 ISP_H2HT(hdl) == ISP_HANDLE_TARGET || \ 327 ISP_H2HT(hdl) == ISP_HANDLE_CTRL) && \ 328 ((hdl) & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 329 (hdl) == ((c)->isp_xflist[(hdl) & ISP_HANDLE_CMD_MASK].handle)) 330 #define ISP_BAD_HANDLE_INDEX 0xffffffff 331 332 333 /* 334 * FC Port Database entry. 335 * 336 * It has a handle that the f/w uses to address commands to a device. 337 * This handle's value may be assigned by the firmware (e.g., for local loop 338 * devices) or by the driver (e.g., for fabric devices). 339 * 340 * It has a state. If the state if VALID, that means that we've logged into 341 * the device. 342 * 343 * Local loop devices the firmware automatically performs PLOGI on for us 344 * (which is why that handle is imposed upon us). Fabric devices we assign 345 * a handle to and perform the PLOGI on. 346 * 347 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 348 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 349 * of devices whose handles change but are otherwise the same device (and 350 * thus keep 'target' constant). 351 * 352 * In any case, we search all possible local loop handles. For each one that 353 * has a port database entity returned, we search for any PROBATIONAL entry 354 * that matches it and update as appropriate. Otherwise, as a new entry, we 355 * find room for it in the Port Database. We *try* and use the handle as the 356 * index to put it into the Database, but that's just an optimization. We mark 357 * the entry VALID and make sure that the target index is updated and correct. 358 * 359 * When we get done searching the local loop, we then search similarily for 360 * a list of devices we've gotten from the fabric name controller (if we're 361 * on a fabric). VALID marking is also done similarily. 362 * 363 * When all of this is done, we can march through the database and clean up 364 * any entry that is still PROBATIONAL (these represent devices which have 365 * departed). Then we're done and can resume normal operations. 366 * 367 * Negative invariants that we try and test for are: 368 * 369 * + There can never be two non-NIL entries with the same { Port, Node } WWN 370 * duples. 371 * 372 * + There can never be two non-NIL entries with the same handle. 373 */ 374 typedef struct { 375 /* 376 * This is the handle that the firmware needs in order for us to 377 * send commands to the device. For pre-24XX cards, this would be 378 * the 'loopid'. 379 */ 380 uint16_t handle; 381 382 /* 383 * A device is 'autologin' if the firmware automatically logs into 384 * it (re-logins as needed). Basically, local private loop devices. 385 * 386 * PRLI word 3 parameters contains role as well as other things. 387 * 388 * The state is the current state of this entry. 389 * 390 * The is_target is the current state of target on this port. 391 * 392 * The is_initiator is the current state of initiator on this port. 393 * 394 * Portid is obvious, as are node && port WWNs. The new_role and 395 * new_portid is for when we are pending a change. 396 */ 397 uint16_t prli_word3; /* PRLI parameters */ 398 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 399 uint16_t : 11, 400 autologin : 1, /* F/W does PLOGI/PLOGO */ 401 probational : 1, 402 state : 3; 403 uint32_t : 6, 404 is_target : 1, 405 is_initiator : 1, 406 portid : 24; 407 uint32_t 408 : 8, 409 new_portid : 24; 410 uint64_t node_wwn; 411 uint64_t port_wwn; 412 uint32_t gone_timer; 413 } fcportdb_t; 414 415 #define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 416 #define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 417 #define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 418 #define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 419 #define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 420 #define FC_PORTDB_STATE_VALID 5 /* Valid */ 421 422 #define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 423 424 /* 425 * FC card specific information 426 * 427 * This structure is replicated across multiple channels for multi-id 428 * capapble chipsets, with some entities different on a per-channel basis. 429 */ 430 431 typedef struct { 432 int isp_gbspeed; /* Connection speed */ 433 int isp_linkstate; /* Link state */ 434 int isp_fwstate; /* ISP F/W state */ 435 int isp_loopstate; /* Loop State */ 436 int isp_topo; /* Connection Type */ 437 438 uint32_t : 4, 439 fctape_enabled : 1, 440 sendmarker : 1, 441 role : 2, 442 isp_portid : 24; /* S_ID */ 443 444 uint16_t isp_fwoptions; 445 uint16_t isp_xfwoptions; 446 uint16_t isp_zfwoptions; 447 uint16_t isp_loopid; /* hard loop id */ 448 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 449 uint16_t isp_lasthdl; /* only valid for channel 0 */ 450 uint16_t isp_maxalloc; 451 uint16_t isp_fabric_params; 452 uint8_t isp_retry_delay; 453 uint8_t isp_retry_count; 454 455 /* 456 * Current active WWNN/WWPN 457 */ 458 uint64_t isp_wwnn; 459 uint64_t isp_wwpn; 460 461 /* 462 * NVRAM WWNN/WWPN 463 */ 464 uint64_t isp_wwnn_nvram; 465 uint64_t isp_wwpn_nvram; 466 467 /* 468 * Our Port Data Base 469 */ 470 fcportdb_t portdb[MAX_FC_TARG]; 471 472 /* 473 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 474 */ 475 void * isp_scratch; 476 XS_DMA_ADDR_T isp_scdma; 477 478 uint8_t isp_scanscratch[ISP_FC_SCRLEN]; 479 } fcparam; 480 481 #define FW_CONFIG_WAIT 0 482 #define FW_WAIT_LINK 1 483 #define FW_WAIT_LOGIN 2 484 #define FW_READY 3 485 #define FW_LOSS_OF_SYNC 4 486 #define FW_ERROR 5 487 #define FW_REINIT 6 488 #define FW_NON_PART 7 489 490 #define LOOP_NIL 0 491 #define LOOP_HAVE_LINK 1 492 #define LOOP_TESTING_LINK 2 493 #define LOOP_LTEST_DONE 3 494 #define LOOP_SCANNING_LOOP 4 495 #define LOOP_LSCAN_DONE 5 496 #define LOOP_SCANNING_FABRIC 6 497 #define LOOP_FSCAN_DONE 7 498 #define LOOP_SYNCING_PDB 8 499 #define LOOP_READY 9 500 501 #define TOPO_NL_PORT 0 502 #define TOPO_FL_PORT 1 503 #define TOPO_N_PORT 2 504 #define TOPO_F_PORT 3 505 #define TOPO_PTP_STUB 4 506 507 #define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 508 509 /* 510 * Soft Structure per host adapter 511 */ 512 struct ispsoftc { 513 /* 514 * Platform (OS) specific data 515 */ 516 struct isposinfo isp_osinfo; 517 518 /* 519 * Pointer to bus specific functions and data 520 */ 521 struct ispmdvec * isp_mdvec; 522 523 /* 524 * (Mostly) nonvolatile state. Board specific parameters 525 * may contain some volatile state (e.g., current loop state). 526 */ 527 528 void * isp_param; /* type specific */ 529 uint64_t isp_fwattr; /* firmware attributes */ 530 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 531 uint16_t isp_maxcmds; /* max possible I/O cmds */ 532 uint8_t isp_type; /* HBA Chip Type */ 533 uint8_t isp_revision; /* HBA Chip H/W Revision */ 534 uint16_t isp_nchan; /* number of channels */ 535 uint32_t isp_maxluns; /* maximum luns supported */ 536 537 uint32_t isp_clock : 8, /* input clock */ 538 : 4, 539 isp_port : 1, /* 23XX/24XX only */ 540 isp_open : 1, /* opened (ioctl) */ 541 isp_bustype : 1, /* SBus or PCI */ 542 isp_loaded_fw : 1, /* loaded firmware */ 543 isp_dblev : 16; /* debug log mask */ 544 545 546 uint32_t isp_confopts; /* config options */ 547 548 uint32_t isp_rqstinrp; /* register for REQINP */ 549 uint32_t isp_rqstoutrp; /* register for REQOUTP */ 550 uint32_t isp_respinrp; /* register for RESINP */ 551 uint32_t isp_respoutrp; /* register for RESOUTP */ 552 553 /* 554 * Instrumentation 555 */ 556 uint64_t isp_intcnt; /* total int count */ 557 uint64_t isp_intbogus; /* spurious int count */ 558 uint64_t isp_intmboxc; /* mbox completions */ 559 uint64_t isp_intoasync; /* other async */ 560 uint64_t isp_rsltccmplt; /* CMDs on result q */ 561 uint64_t isp_fphccmplt; /* CMDs via fastpost */ 562 uint16_t isp_rscchiwater; 563 uint16_t isp_fpcchiwater; 564 NANOTIME_T isp_init_time; /* time were last initialized */ 565 566 /* 567 * Volatile state 568 */ 569 570 volatile uint32_t : 8, 571 : 2, 572 isp_dead : 1, 573 : 1, 574 isp_mboxbsy : 1, /* mailbox command active */ 575 isp_state : 3, 576 isp_nactive : 16; /* how many commands active */ 577 volatile mbreg_t isp_curmbx; /* currently active mailbox command */ 578 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 579 volatile uint32_t isp_reqidx; /* index of next request */ 580 volatile uint32_t isp_residx; /* index of last ISP write */ 581 volatile uint32_t isp_resodx; /* index of next result */ 582 volatile uint32_t isp_atioodx; /* index of next ATIO */ 583 volatile uint32_t isp_obits; /* mailbox command output */ 584 volatile uint32_t isp_serno; /* rolling serial number */ 585 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 586 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */ 587 volatile uint16_t isp_mbxwrk0; 588 volatile uint16_t isp_mbxwrk1; 589 volatile uint16_t isp_mbxwrk2; 590 volatile uint16_t isp_mbxwrk8; 591 volatile uint16_t isp_seqno; /* running sequence number */ 592 void * isp_mbxworkp; 593 594 /* 595 * Active commands are stored here, indexed by handle functions. 596 */ 597 isp_hdl_t *isp_xflist; 598 isp_hdl_t *isp_xffree; 599 600 /* 601 * DMA mapped in area for synchronous IOCB requests. 602 */ 603 void * isp_iocb; 604 XS_DMA_ADDR_T isp_iocb_dma; 605 606 /* 607 * request/result queue pointers and DMA handles for them. 608 */ 609 void * isp_rquest; 610 void * isp_result; 611 XS_DMA_ADDR_T isp_rquest_dma; 612 XS_DMA_ADDR_T isp_result_dma; 613 #ifdef ISP_TARGET_MODE 614 /* for 24XX only */ 615 void * isp_atioq; 616 XS_DMA_ADDR_T isp_atioq_dma; 617 #endif 618 }; 619 620 #define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)]) 621 #define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)]) 622 623 #define ISP_SET_SENDMARKER(isp, chan, val) \ 624 if (IS_FC(isp)) { \ 625 FCPARAM(isp, chan)->sendmarker = val; \ 626 } else { \ 627 SDPARAM(isp, chan)->sendmarker = val; \ 628 } 629 630 #define ISP_TST_SENDMARKER(isp, chan) \ 631 (IS_FC(isp)? \ 632 FCPARAM(isp, chan)->sendmarker != 0 : \ 633 SDPARAM(isp, chan)->sendmarker != 0) 634 635 /* 636 * ISP Driver Run States 637 */ 638 #define ISP_NILSTATE 0 639 #define ISP_CRASHED 1 640 #define ISP_RESETSTATE 2 641 #define ISP_INITSTATE 3 642 #define ISP_RUNSTATE 4 643 644 /* 645 * ISP Runtime Configuration Options 646 */ 647 #define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 648 #define ISP_CFG_PORT_PREF 0x0c /* Mask for Port Prefs (all FC except 2100) */ 649 #define ISP_CFG_LPORT 0x00 /* prefer {N/F}L-Port connection */ 650 #define ISP_CFG_NPORT 0x04 /* prefer {N/F}-Port connection */ 651 #define ISP_CFG_NPORT_ONLY 0x08 /* insist on {N/F}-Port connection */ 652 #define ISP_CFG_LPORT_ONLY 0x0c /* insist on {N/F}L-Port connection */ 653 #define ISP_CFG_1GB 0x10 /* force 1GB connection (23XX only) */ 654 #define ISP_CFG_2GB 0x20 /* force 2GB connection (23XX only) */ 655 #define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 656 #define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 657 #define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 658 #define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 659 #define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 660 #define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 661 #define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */ 662 #define ISP_CFG_4GB 0x2000 /* force 4GB connection (24XX only) */ 663 #define ISP_CFG_8GB 0x4000 /* force 8GB connection (25XX only) */ 664 #define ISP_CFG_16GB 0x8000 /* force 16GB connection (82XX only) */ 665 666 /* 667 * For each channel, the outer layers should know what role that channel 668 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 669 * ISP_ROLE_BOTH. 670 * 671 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 672 * NVRAM read, and defaults set, but any further initialization (e.g. 673 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 674 * 675 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 676 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 677 * 678 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 679 * needs to be enabled, or will even work. What happens with the 2X00 cards 680 * here is that if you have enabled it with TARGET MODE as part of the ICB 681 * options, but you haven't given the f/w any ram resources for ATIOs or 682 * Immediate Notifies, the f/w just handles what it can and you never see 683 * anything. Basically, it sends a single byte of data (the first byte, 684 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 685 * INQUIRY, and sends back QUEUE FULL status for any other command. 686 * 687 */ 688 #define ISP_ROLE_NONE 0x0 689 #define ISP_ROLE_TARGET 0x1 690 #define ISP_ROLE_INITIATOR 0x2 691 #define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 692 #define ISP_ROLE_EITHER ISP_ROLE_BOTH 693 #ifndef ISP_DEFAULT_ROLES 694 /* 695 * Counterintuitively, we prefer to default to role 'none' 696 * if we are enable target mode support. This gives us the 697 * maximum flexibility as to which port will do what. 698 */ 699 #ifdef ISP_TARGET_MODE 700 #define ISP_DEFAULT_ROLES ISP_ROLE_NONE 701 #else 702 #define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 703 #endif 704 #endif 705 706 707 /* 708 * Firmware related defines 709 */ 710 #define ISP_CODE_ORG 0x1000 /* default f/w code start */ 711 #define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 712 #define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 713 #define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 714 #define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 715 #define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 716 #define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 717 #define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 718 #define ISP_FW_MAJORX(xp) (xp[0]) 719 #define ISP_FW_MINORX(xp) (xp[1]) 720 #define ISP_FW_MICROX(xp) (xp[2]) 721 #define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 722 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 723 #define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 724 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 725 726 /* 727 * Bus (implementation) types 728 */ 729 #define ISP_BT_PCI 0 /* PCI Implementations */ 730 #define ISP_BT_SBUS 1 /* SBus Implementations */ 731 732 /* 733 * If we have not otherwise defined SBus support away make sure 734 * it is defined here such that the code is included as default 735 */ 736 #ifndef ISP_SBUS_SUPPORTED 737 #define ISP_SBUS_SUPPORTED 1 738 #endif 739 740 /* 741 * Chip Types 742 */ 743 #define ISP_HA_SCSI 0xf 744 #define ISP_HA_SCSI_UNKNOWN 0x1 745 #define ISP_HA_SCSI_1020 0x2 746 #define ISP_HA_SCSI_1020A 0x3 747 #define ISP_HA_SCSI_1040 0x4 748 #define ISP_HA_SCSI_1040A 0x5 749 #define ISP_HA_SCSI_1040B 0x6 750 #define ISP_HA_SCSI_1040C 0x7 751 #define ISP_HA_SCSI_1240 0x8 752 #define ISP_HA_SCSI_1080 0x9 753 #define ISP_HA_SCSI_1280 0xa 754 #define ISP_HA_SCSI_10160 0xb 755 #define ISP_HA_SCSI_12160 0xc 756 #define ISP_HA_FC 0xf0 757 #define ISP_HA_FC_2100 0x10 758 #define ISP_HA_FC_2200 0x20 759 #define ISP_HA_FC_2300 0x30 760 #define ISP_HA_FC_2312 0x40 761 #define ISP_HA_FC_2322 0x50 762 #define ISP_HA_FC_2400 0x60 763 #define ISP_HA_FC_2500 0x70 764 #define ISP_HA_FC_2600 0x80 765 766 #define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 767 #define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240) 768 #define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 769 #define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 770 #define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 771 #define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160) 772 #define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160) 773 774 #define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp)) 775 #define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp)) 776 #define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp)) 777 #define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp)) 778 #define IS_ULTRA3(isp) (IS_1X160(isp)) 779 780 #define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC) 781 #define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100) 782 #define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200) 783 #define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \ 784 (isp)->isp_type < ISP_HA_FC_2400) 785 #define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300) 786 #define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312) 787 #define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322) 788 #define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400) 789 #define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 790 #define IS_26XX(isp) ((isp)->isp_type >= ISP_HA_FC_2600) 791 792 /* 793 * DMA related macros 794 */ 795 #define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 796 #define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 797 #define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 798 #define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 799 800 #define DMA_LO32(x) ((uint32_t) (x)) 801 #define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 802 803 /* 804 * Core System Function Prototypes 805 */ 806 807 /* 808 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 809 */ 810 void isp_reset(ispsoftc_t *, int); 811 812 /* 813 * Initialize Hardware to known state 814 */ 815 void isp_init(ispsoftc_t *); 816 817 /* 818 * Reset the ISP and call completion for any orphaned commands. 819 */ 820 int isp_reinit(ispsoftc_t *, int); 821 822 /* 823 * Internal Interrupt Service Routine 824 * 825 * The outer layers do the spade work to get the appropriate status register, 826 * semaphore register and first mailbox register (if appropriate). This also 827 * means that most spurious/bogus interrupts not for us can be filtered first. 828 */ 829 void isp_intr(ispsoftc_t *, uint16_t, uint16_t, uint16_t); 830 831 832 /* 833 * Command Entry Point- Platform Dependent layers call into this 834 */ 835 int isp_start(XS_T *); 836 837 /* these values are what isp_start returns */ 838 #define CMD_COMPLETE 101 /* command completed */ 839 #define CMD_EAGAIN 102 /* busy- maybe retry later */ 840 #define CMD_QUEUED 103 /* command has been queued for execution */ 841 #define CMD_RQLATER 104 /* requeue this command later */ 842 843 /* 844 * Command Completion Point- Core layers call out from this with completed cmds 845 */ 846 void isp_done(XS_T *); 847 848 /* 849 * Platform Dependent to External to Internal Control Function 850 * 851 * Assumes locks are held on entry. You should note that with many of 852 * these commands locks may be released while this function is called. 853 * 854 * ... ISPCTL_RESET_BUS, int channel); 855 * Reset BUS on this channel 856 * ... ISPCTL_RESET_DEV, int channel, int target); 857 * Reset Device on this channel at this target. 858 * ... ISPCTL_ABORT_CMD, XS_T *xs); 859 * Abort active transaction described by xs. 860 * ... IPCTL_UPDATE_PARAMS); 861 * Update any operating parameters (speed, etc.) 862 * ... ISPCTL_FCLINK_TEST, int channel); 863 * Test FC link status on this channel 864 * ... ISPCTL_SCAN_LOOP, int channel); 865 * Scan local loop on this channel 866 * ... ISPCTL_SCAN_FABRIC, int channel); 867 * Scan fabric on this channel 868 * ... ISPCTL_PDB_SYNC, int channel); 869 * Synchronize port database on this channel 870 * ... ISPCTL_SEND_LIP, int channel); 871 * Send a LIP on this channel 872 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 873 * Get a WWNN/WWPN for this N-port handle on this channel 874 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 875 * Run this mailbox command 876 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 877 * Get PDB on this channel for this N-port handle 878 * ... ISPCTL_PLOGX, isp_plcmd_t *) 879 * Performa a port login/logout 880 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 881 * Change role of specified channel 882 * 883 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 884 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 885 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 886 * and logging out of fabric devices (if one is on a fabric) and then marking 887 * the 'loop state' as being ready to now be used for sending commands to 888 * devices. 889 */ 890 typedef enum { 891 ISPCTL_RESET_BUS, 892 ISPCTL_RESET_DEV, 893 ISPCTL_ABORT_CMD, 894 ISPCTL_UPDATE_PARAMS, 895 ISPCTL_FCLINK_TEST, 896 ISPCTL_SCAN_FABRIC, 897 ISPCTL_SCAN_LOOP, 898 ISPCTL_PDB_SYNC, 899 ISPCTL_SEND_LIP, 900 ISPCTL_GET_NAMES, 901 ISPCTL_RUN_MBOXCMD, 902 ISPCTL_GET_PDB, 903 ISPCTL_PLOGX, 904 ISPCTL_CHANGE_ROLE 905 } ispctl_t; 906 int isp_control(ispsoftc_t *, ispctl_t, ...); 907 908 /* 909 * Platform Dependent to Internal to External Control Function 910 */ 911 912 typedef enum { 913 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */ 914 ISPASYNC_BUS_RESET, /* All Bus Was Reset */ 915 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 916 ISPASYNC_LOOP_UP, /* FC Loop Up */ 917 ISPASYNC_LIP, /* FC LIP Received */ 918 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 919 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 920 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 921 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 922 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 923 ISPASYNC_DEV_GONE, /* FC Device Departure */ 924 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 925 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 926 ISPASYNC_TARGET_ACTION, /* All target action requested */ 927 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 928 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 929 } ispasync_t; 930 void isp_async(ispsoftc_t *, ispasync_t, ...); 931 932 #define ISPASYNC_CHANGE_PDB 0 933 #define ISPASYNC_CHANGE_SNS 1 934 #define ISPASYNC_CHANGE_OTHER 2 935 936 /* 937 * Platform Independent Error Prinout 938 */ 939 void isp_prt_endcmd(ispsoftc_t *, XS_T *); 940 941 /* 942 * Platform Dependent Error and Debug Printout 943 * 944 * Two required functions for each platform must be provided: 945 * 946 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 947 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 948 * 949 * but due to compiler differences on different platforms this won't be 950 * formally defined here. Instead, they go in each platform definition file. 951 */ 952 953 #define ISP_LOGALL 0x0 /* log always */ 954 #define ISP_LOGCONFIG 0x1 /* log configuration messages */ 955 #define ISP_LOGINFO 0x2 /* log informational messages */ 956 #define ISP_LOGWARN 0x4 /* log warning messages */ 957 #define ISP_LOGERR 0x8 /* log error messages */ 958 #define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 959 #define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 960 #define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 961 #define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 962 #define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 963 #define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 964 #define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 965 #define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 966 #define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 967 #define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 968 #define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 969 970 /* 971 * Each Platform provides it's own isposinfo substructure of the ispsoftc 972 * defined above. 973 * 974 * Each platform must also provide the following macros/defines: 975 * 976 * 977 * ISP_FC_SCRLEN FC scratch area DMA length 978 * 979 * ISP_MEMZERO(dst, src) platform zeroing function 980 * ISP_MEMCPY(dst, src, count) platform copying function 981 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 982 * ISP_DELAY(usecs) microsecond spindelay function 983 * ISP_SLEEP(isp, usecs) microsecond sleep function 984 * 985 * ISP_INLINE ___inline or not- depending on how 986 * good your debugger is 987 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 988 * 989 * NANOTIME_T nanosecond time type 990 * 991 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 992 * 993 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 994 * 995 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 996 * subtract two NANOTIME_T values 997 * 998 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 999 * for this particular board type 1000 * 1001 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 1002 * 1003 * Function/Macro the provides memory synchronization on 1004 * various objects so that the ISP's and the system's view 1005 * of the same object is consistent. 1006 * 1007 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs 1008 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done 1009 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee 1010 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs 1011 * 1012 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 1013 * return -1 if you cannot 1014 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 1015 * 1016 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 1017 * 1018 * SCSI_GOOD SCSI 'Good' Status 1019 * SCSI_CHECK SCSI 'Check Condition' Status 1020 * SCSI_BUSY SCSI 'Busy' Status 1021 * SCSI_QFULL SCSI 'Queue Full' Status 1022 * 1023 * XS_T Platform SCSI transaction type (i.e., command for HBA) 1024 * XS_DMA_ADDR_T Platform PCI DMA Address Type 1025 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value 1026 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 1027 * XS_ISP(xs) gets an instance out of an XS_T 1028 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 1029 * XS_TGT(xs) gets the target "" 1030 * XS_LUN(xs) gets the lun "" 1031 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 1032 * XS_CDBLEN(xs) gets the CDB's length "" 1033 * XS_XFRLEN(xs) gets the associated data transfer length "" 1034 * XS_TIME(xs) gets the time (in milliseconds) for this command 1035 * XS_GET_RESID(xs) gets the current residual count 1036 * XS_GET_RESID(xs, resid) sets the current residual count 1037 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 1038 * XS_SNSP(xs) gets a pointer to the associate sense data 1039 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 1040 * XS_CUR_SNSLEN(xs) gets the currently used lenght of sense data storage 1041 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 1042 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 1043 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 1044 * XS_TAG_P(xs) predicate of whether this command should be tagged 1045 * XS_TAG_TYPE(xs) which type of tag to use 1046 * XS_SETERR(xs) set error state 1047 * 1048 * HBA_NOERROR command has no erros 1049 * HBA_BOTCH hba botched something 1050 * HBA_CMDTIMEOUT command timed out 1051 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 1052 * HBA_TGTBSY target returned a BUSY status 1053 * HBA_BUSRESET bus reset destroyed command 1054 * HBA_ABORTED command was aborted (by request) 1055 * HBA_DATAOVR a data overrun was detected 1056 * HBA_ARQFAIL Automatic Request Sense failed 1057 * 1058 * XS_ERR(xs) return current error state 1059 * XS_NOERR(xs) there is no error currently set 1060 * XS_INITERR(xs) initialize error state 1061 * 1062 * XS_SAVE_SENSE(xs, sp, total_len, this_len) save sense data (total and current amount) 1063 * 1064 * XS_APPEND_SENSE(xs, sp, len) append more sense data 1065 * 1066 * XS_SENSE_VALID(xs) indicates whether sense is valid 1067 * 1068 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 1069 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle 1070 * 1071 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 1072 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID 1073 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 1074 * 1075 * These establish reasonable defaults for each platform. 1076 * These must be available independent of card NVRAM and are 1077 * to be used should NVRAM not be readable. 1078 * 1079 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 1080 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 1081 * 1082 * These defines are hooks to allow the setting of node and 1083 * port WWNs when NVRAM cannot be read or is to be overriden. 1084 * 1085 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 1086 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 1087 * 1088 * After NVRAM is read, these will be invoked to get the 1089 * node and port WWNs that will actually be used for this 1090 * channel. 1091 * 1092 * 1093 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 1094 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 1095 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 1096 * 1097 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 1098 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 1099 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 1100 * 1101 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 1102 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 1103 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 1104 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 1105 */ 1106 1107 #ifdef ISP_TARGET_MODE 1108 /* 1109 * The functions below are for the publicly available 1110 * target mode functions that are internal to the Qlogic driver. 1111 */ 1112 1113 /* 1114 * This function handles new response queue entry appropriate for target mode. 1115 */ 1116 int isp_target_notify(ispsoftc_t *, void *, uint32_t *); 1117 1118 /* 1119 * This function externalizes the ability to acknowledge an Immediate Notify request. 1120 */ 1121 int isp_notify_ack(ispsoftc_t *, void *); 1122 1123 /* 1124 * This function externalized acknowledging (success/fail) an ABTS frame 1125 */ 1126 int isp_acknak_abts(ispsoftc_t *, void *, int); 1127 1128 /* 1129 * General request queue 'put' routine for target mode entries. 1130 */ 1131 int isp_target_put_entry(ispsoftc_t *isp, void *); 1132 1133 /* 1134 * General routine to put back an ATIO entry- 1135 * used for replenishing f/w resource counts. 1136 * The argument is a pointer to a source ATIO 1137 * or ATIO2. 1138 */ 1139 int isp_target_put_atio(ispsoftc_t *, void *); 1140 1141 /* 1142 * General routine to send a final CTIO for a command- used mostly for 1143 * local responses. 1144 */ 1145 int isp_endcmd(ispsoftc_t *, ...); 1146 #define ECMD_SVALID 0x100 1147 #define ECMD_TERMINATE 0x200 1148 1149 /* 1150 * Handle an asynchronous event 1151 * 1152 * Return nonzero if the interrupt that generated this event has been dismissed. 1153 */ 1154 int isp_target_async(ispsoftc_t *, int, int); 1155 #endif 1156 #endif /* _ISPVAR_H */ 1157