1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1997-2009 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 */ 29 /* 30 * Soft Definitions for for Qlogic ISP SCSI adapters. 31 */ 32 33 #ifndef _ISPVAR_H 34 #define _ISPVAR_H 35 36 #if defined(__NetBSD__) || defined(__OpenBSD__) 37 #include <dev/ic/isp_stds.h> 38 #include <dev/ic/ispmbox.h> 39 #endif 40 #ifdef __FreeBSD__ 41 #include <dev/isp/isp_stds.h> 42 #include <dev/isp/ispmbox.h> 43 #endif 44 #ifdef __linux__ 45 #include "isp_stds.h" 46 #include "ispmbox.h" 47 #endif 48 #ifdef __svr4__ 49 #include "isp_stds.h" 50 #include "ispmbox.h" 51 #endif 52 53 #define ISP_CORE_VERSION_MAJOR 7 54 #define ISP_CORE_VERSION_MINOR 0 55 56 /* 57 * Vector for bus specific code to provide specific services. 58 */ 59 typedef struct ispsoftc ispsoftc_t; 60 struct ispmdvec { 61 int (*dv_rd_isr) (ispsoftc_t *, uint16_t *, uint16_t *, uint16_t *); 62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 64 int (*dv_mbxdma) (ispsoftc_t *); 65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *); 66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t); 67 void (*dv_reset0) (ispsoftc_t *); 68 void (*dv_reset1) (ispsoftc_t *); 69 void (*dv_dregs) (ispsoftc_t *, const char *); 70 const void * dv_ispfw; /* ptr to f/w */ 71 uint16_t dv_conf1; 72 uint16_t dv_clock; /* clock frequency */ 73 }; 74 75 /* 76 * Overall parameters 77 */ 78 #define MAX_TARGETS 16 79 #ifndef MAX_FC_TARG 80 #define MAX_FC_TARG 1024 81 #endif 82 #define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 83 #define ISP_MAX_LUNS(isp) (isp)->isp_maxluns 84 85 /* 86 * Macros to access ISP registers through bus specific layers- 87 * mostly wrappers to vector through the mdvec structure. 88 */ 89 #define ISP_READ_ISR(isp, isrp, semap, info) \ 90 (*(isp)->isp_mdvec->dv_rd_isr)(isp, isrp, semap, info) 91 92 #define ISP_READ(isp, reg) \ 93 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 94 95 #define ISP_WRITE(isp, reg, val) \ 96 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 97 98 #define ISP_MBOXDMASETUP(isp) \ 99 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 100 101 #define ISP_DMASETUP(isp, xs, req) \ 102 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req)) 103 104 #define ISP_DMAFREE(isp, xs, hndl) \ 105 if ((isp)->isp_mdvec->dv_dmaclr) \ 106 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 107 108 #define ISP_RESET0(isp) \ 109 if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp)) 110 #define ISP_RESET1(isp) \ 111 if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp)) 112 #define ISP_DUMPREGS(isp, m) \ 113 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 114 115 #define ISP_SETBITS(isp, reg, val) \ 116 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 117 118 #define ISP_CLRBITS(isp, reg, val) \ 119 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 120 121 /* 122 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 123 * on Request and Response Queues, Scratch DMA areas, and Registers) 124 * 125 * Defined Memory Barrier Synchronization Types 126 */ 127 #define SYNC_REQUEST 0 /* request queue synchronization */ 128 #define SYNC_RESULT 1 /* result queue synchronization */ 129 #define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 130 #define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 131 #define SYNC_REG 4 /* for registers */ 132 #define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 133 #define SYNC_IFORDEV 6 /* synchrounous IOCB, sync for ISP */ 134 #define SYNC_IFORCPU 7 /* synchrounous IOCB, sync for CPU */ 135 136 /* 137 * Request/Response Queue defines and macros. 138 * The maximum is defined per platform (and can be based on board type). 139 */ 140 /* This is the size of a queue entry (request and response) */ 141 #define QENTRY_LEN 64 142 /* Both request and result queue length must be a power of two */ 143 #define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x) 144 #ifdef ISP_TARGET_MODE 145 #define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x) 146 #else 147 #define RESULT_QUEUE_LEN(x) \ 148 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2) 149 #endif 150 #define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN)) 151 #define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 152 #define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 153 #define ISP_QFREE(in, out, qlen) \ 154 ((in == out)? (qlen - 1) : ((in > out)? \ 155 ((qlen - 1) - (in - out)) : (out - in - 1))) 156 #define ISP_QAVAIL(isp) \ 157 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 158 159 #define ISP_ADD_REQUEST(isp, nxti) \ 160 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 161 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \ 162 isp->isp_reqidx = nxti 163 164 #define ISP_SYNC_REQUEST(isp) \ 165 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 166 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 167 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx) 168 169 /* 170 * SCSI Specific Host Adapter Parameters- per bus, per target 171 */ 172 typedef struct { 173 uint32_t : 8, 174 update : 1, 175 sendmarker : 1, 176 isp_req_ack_active_neg : 1, 177 isp_data_line_active_neg: 1, 178 isp_cmd_dma_burst_enable: 1, 179 isp_data_dma_burst_enabl: 1, 180 isp_fifo_threshold : 3, 181 isp_ptisp : 1, 182 isp_ultramode : 1, 183 isp_diffmode : 1, 184 isp_lvdmode : 1, 185 isp_fast_mttr : 1, /* fast sram */ 186 isp_initiator_id : 4, 187 isp_async_data_setup : 4; 188 uint16_t isp_selection_timeout; 189 uint16_t isp_max_queue_depth; 190 uint8_t isp_tag_aging; 191 uint8_t isp_bus_reset_delay; 192 uint8_t isp_retry_count; 193 uint8_t isp_retry_delay; 194 struct { 195 uint32_t 196 exc_throttle : 8, 197 : 1, 198 dev_enable : 1, /* ignored */ 199 dev_update : 1, 200 dev_refresh : 1, 201 actv_offset : 4, 202 goal_offset : 4, 203 nvrm_offset : 4; 204 uint8_t actv_period; /* current sync period */ 205 uint8_t goal_period; /* goal sync period */ 206 uint8_t nvrm_period; /* nvram sync period */ 207 uint16_t actv_flags; /* current device flags */ 208 uint16_t goal_flags; /* goal device flags */ 209 uint16_t nvrm_flags; /* nvram device flags */ 210 } isp_devparam[MAX_TARGETS]; 211 } sdparam; 212 213 /* 214 * Device Flags 215 */ 216 #define DPARM_DISC 0x8000 217 #define DPARM_PARITY 0x4000 218 #define DPARM_WIDE 0x2000 219 #define DPARM_SYNC 0x1000 220 #define DPARM_TQING 0x0800 221 #define DPARM_ARQ 0x0400 222 #define DPARM_QFRZ 0x0200 223 #define DPARM_RENEG 0x0100 224 #define DPARM_NARROW 0x0080 225 #define DPARM_ASYNC 0x0040 226 #define DPARM_PPR 0x0020 227 #define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 228 #define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 229 230 /* technically, not really correct, as they need to be rated based upon clock */ 231 #define ISP_80M_SYNCPARMS 0x0c09 232 #define ISP_40M_SYNCPARMS 0x0c0a 233 #define ISP_20M_SYNCPARMS 0x0c0c 234 #define ISP_20M_SYNCPARMS_1040 0x080c 235 #define ISP_10M_SYNCPARMS 0x0c19 236 #define ISP_08M_SYNCPARMS 0x0c25 237 #define ISP_05M_SYNCPARMS 0x0c32 238 #define ISP_04M_SYNCPARMS 0x0c41 239 240 /* 241 * Fibre Channel Specifics 242 */ 243 /* These are for non-2K Login Firmware cards */ 244 #define FL_ID 0x7e /* FL_Port Special ID */ 245 #define SNS_ID 0x80 /* SNS Server Special ID */ 246 #define NPH_MAX 0xfe 247 248 /* These are for 2K Login Firmware cards */ 249 #define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 250 #define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 251 #define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 252 #define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 253 #define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 254 #define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 255 #define NPH_MAX_2K 0x800 256 257 /* 258 * "Unassigned" handle to be used internally 259 */ 260 #define NIL_HANDLE 0xffff 261 262 /* 263 * Limit for devices on an arbitrated loop. 264 */ 265 #define LOCAL_LOOP_LIM 126 266 267 /* 268 * Limit for (2K login) N-port handle amounts 269 */ 270 #define MAX_NPORT_HANDLE 2048 271 272 /* 273 * Special Constants 274 */ 275 #define INI_NONE ((uint64_t) 0) 276 #define ISP_NOCHAN 0xff 277 278 /* 279 * Special Port IDs 280 */ 281 #define MANAGEMENT_PORT_ID 0xFFFFFA 282 #define SNS_PORT_ID 0xFFFFFC 283 #define FABRIC_PORT_ID 0xFFFFFE 284 #define PORT_ANY 0xFFFFFF 285 #define PORT_NONE 0 286 #define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 287 #define DOMAIN_CONTROLLER_BASE 0xFFFC00 288 #define DOMAIN_CONTROLLER_END 0xFFFCFF 289 290 /* 291 * Command Handles 292 * 293 * Most QLogic initiator or target have 32 bit handles associated with them. 294 * We want to have a quick way to index back and forth between a local SCSI 295 * command context and what the firmware is passing back to us. We also 296 * want to avoid working on stale information. This structure handles both 297 * at the expense of some local memory. 298 * 299 * The handle is architected thusly: 300 * 301 * 0 means "free handle" 302 * bits 0..12 index commands 303 * bits 13..15 bits index usage 304 * bits 16..31 contain a rolling sequence 305 * 306 * 307 */ 308 typedef struct { 309 void * cmd; /* associated command context */ 310 uint32_t handle; /* handle associated with this command */ 311 } isp_hdl_t; 312 #define ISP_HANDLE_FREE 0x00000000 313 #define ISP_HANDLE_CMD_MASK 0x00001fff 314 #define ISP_HANDLE_USAGE_MASK 0x0000e000 315 #define ISP_HANDLE_USAGE_SHIFT 13 316 #define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 317 # define ISP_HANDLE_NONE 0 318 # define ISP_HANDLE_INITIATOR 1 319 # define ISP_HANDLE_TARGET 2 320 # define ISP_HANDLE_CTRL 3 321 #define ISP_HANDLE_SEQ_MASK 0xffff0000 322 #define ISP_HANDLE_SEQ_SHIFT 16 323 #define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 324 #define ISP_VALID_HANDLE(c, hdl) \ 325 ((ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR || \ 326 ISP_H2HT(hdl) == ISP_HANDLE_TARGET || \ 327 ISP_H2HT(hdl) == ISP_HANDLE_CTRL) && \ 328 ((hdl) & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 329 (hdl) == ((c)->isp_xflist[(hdl) & ISP_HANDLE_CMD_MASK].handle)) 330 #define ISP_BAD_HANDLE_INDEX 0xffffffff 331 332 333 /* 334 * FC Port Database entry. 335 * 336 * It has a handle that the f/w uses to address commands to a device. 337 * This handle's value may be assigned by the firmware (e.g., for local loop 338 * devices) or by the driver (e.g., for fabric devices). 339 * 340 * It has a state. If the state if VALID, that means that we've logged into 341 * the device. 342 * 343 * Local loop devices the firmware automatically performs PLOGI on for us 344 * (which is why that handle is imposed upon us). Fabric devices we assign 345 * a handle to and perform the PLOGI on. 346 * 347 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 348 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 349 * of devices whose handles change but are otherwise the same device (and 350 * thus keep 'target' constant). 351 * 352 * In any case, we search all possible local loop handles. For each one that 353 * has a port database entity returned, we search for any PROBATIONAL entry 354 * that matches it and update as appropriate. Otherwise, as a new entry, we 355 * find room for it in the Port Database. We *try* and use the handle as the 356 * index to put it into the Database, but that's just an optimization. We mark 357 * the entry VALID and make sure that the target index is updated and correct. 358 * 359 * When we get done searching the local loop, we then search similarly for 360 * a list of devices we've gotten from the fabric name controller (if we're 361 * on a fabric). VALID marking is also done similarly. 362 * 363 * When all of this is done, we can march through the database and clean up 364 * any entry that is still PROBATIONAL (these represent devices which have 365 * departed). Then we're done and can resume normal operations. 366 * 367 * Negative invariants that we try and test for are: 368 * 369 * + There can never be two non-NIL entries with the same { Port, Node } WWN 370 * duples. 371 * 372 * + There can never be two non-NIL entries with the same handle. 373 */ 374 typedef struct { 375 /* 376 * This is the handle that the firmware needs in order for us to 377 * send commands to the device. For pre-24XX cards, this would be 378 * the 'loopid'. 379 */ 380 uint16_t handle; 381 382 /* 383 * A device is 'autologin' if the firmware automatically logs into 384 * it (re-logins as needed). Basically, local private loop devices. 385 * 386 * PRLI word 3 parameters contains role as well as other things. 387 * 388 * The state is the current state of this entry. 389 * 390 * The is_target is the current state of target on this port. 391 * 392 * The is_initiator is the current state of initiator on this port. 393 * 394 * Portid is obvious, as are node && port WWNs. The new_role and 395 * new_portid is for when we are pending a change. 396 */ 397 uint16_t prli_word3; /* PRLI parameters */ 398 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 399 uint16_t : 11, 400 autologin : 1, /* F/W does PLOGI/PLOGO */ 401 probational : 1, 402 state : 3; 403 uint32_t : 6, 404 is_target : 1, 405 is_initiator : 1, 406 portid : 24; 407 uint32_t 408 : 8, 409 new_portid : 24; 410 uint64_t node_wwn; 411 uint64_t port_wwn; 412 uint32_t gone_timer; 413 } fcportdb_t; 414 415 #define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 416 #define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 417 #define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 418 #define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 419 #define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 420 #define FC_PORTDB_STATE_VALID 5 /* Valid */ 421 422 #define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 423 424 /* 425 * FC card specific information 426 * 427 * This structure is replicated across multiple channels for multi-id 428 * capapble chipsets, with some entities different on a per-channel basis. 429 */ 430 431 typedef struct { 432 int isp_gbspeed; /* Connection speed */ 433 int isp_linkstate; /* Link state */ 434 int isp_fwstate; /* ISP F/W state */ 435 int isp_loopstate; /* Loop State */ 436 int isp_topo; /* Connection Type */ 437 438 uint32_t : 4, 439 fctape_enabled : 1, 440 sendmarker : 1, 441 role : 2, 442 isp_portid : 24; /* S_ID */ 443 444 uint16_t isp_fwoptions; 445 uint16_t isp_xfwoptions; 446 uint16_t isp_zfwoptions; 447 uint16_t isp_loopid; /* hard loop id */ 448 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 449 uint16_t isp_lasthdl; /* only valid for channel 0 */ 450 uint16_t isp_maxalloc; 451 uint16_t isp_fabric_params; 452 uint16_t isp_login_hdl; /* Logging in handle */ 453 uint8_t isp_retry_delay; 454 uint8_t isp_retry_count; 455 456 /* 457 * Current active WWNN/WWPN 458 */ 459 uint64_t isp_wwnn; 460 uint64_t isp_wwpn; 461 462 /* 463 * NVRAM WWNN/WWPN 464 */ 465 uint64_t isp_wwnn_nvram; 466 uint64_t isp_wwpn_nvram; 467 468 /* 469 * Our Port Data Base 470 */ 471 fcportdb_t portdb[MAX_FC_TARG]; 472 473 /* 474 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 475 */ 476 void * isp_scratch; 477 XS_DMA_ADDR_T isp_scdma; 478 479 uint8_t isp_scanscratch[ISP_FC_SCRLEN]; 480 } fcparam; 481 482 #define FW_CONFIG_WAIT 0 483 #define FW_WAIT_LINK 1 484 #define FW_WAIT_LOGIN 2 485 #define FW_READY 3 486 #define FW_LOSS_OF_SYNC 4 487 #define FW_ERROR 5 488 #define FW_REINIT 6 489 #define FW_NON_PART 7 490 491 #define LOOP_NIL 0 492 #define LOOP_HAVE_LINK 1 493 #define LOOP_HAVE_ADDR 2 494 #define LOOP_TESTING_LINK 3 495 #define LOOP_LTEST_DONE 4 496 #define LOOP_SCANNING_LOOP 5 497 #define LOOP_LSCAN_DONE 6 498 #define LOOP_SCANNING_FABRIC 7 499 #define LOOP_FSCAN_DONE 8 500 #define LOOP_SYNCING_PDB 9 501 #define LOOP_READY 10 502 503 #define TOPO_NL_PORT 0 504 #define TOPO_FL_PORT 1 505 #define TOPO_N_PORT 2 506 #define TOPO_F_PORT 3 507 #define TOPO_PTP_STUB 4 508 509 #define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 510 511 /* 512 * Soft Structure per host adapter 513 */ 514 struct ispsoftc { 515 /* 516 * Platform (OS) specific data 517 */ 518 struct isposinfo isp_osinfo; 519 520 /* 521 * Pointer to bus specific functions and data 522 */ 523 struct ispmdvec * isp_mdvec; 524 525 /* 526 * (Mostly) nonvolatile state. Board specific parameters 527 * may contain some volatile state (e.g., current loop state). 528 */ 529 530 void * isp_param; /* type specific */ 531 uint64_t isp_fwattr; /* firmware attributes */ 532 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 533 uint16_t isp_maxcmds; /* max possible I/O cmds */ 534 uint8_t isp_type; /* HBA Chip Type */ 535 uint8_t isp_revision; /* HBA Chip H/W Revision */ 536 uint16_t isp_nchan; /* number of channels */ 537 uint32_t isp_maxluns; /* maximum luns supported */ 538 539 uint32_t isp_clock : 8, /* input clock */ 540 : 4, 541 isp_port : 1, /* 23XX/24XX only */ 542 isp_open : 1, /* opened (ioctl) */ 543 isp_bustype : 1, /* SBus or PCI */ 544 isp_loaded_fw : 1, /* loaded firmware */ 545 isp_dblev : 16; /* debug log mask */ 546 547 548 uint32_t isp_confopts; /* config options */ 549 550 uint32_t isp_rqstinrp; /* register for REQINP */ 551 uint32_t isp_rqstoutrp; /* register for REQOUTP */ 552 uint32_t isp_respinrp; /* register for RESINP */ 553 uint32_t isp_respoutrp; /* register for RESOUTP */ 554 555 /* 556 * Instrumentation 557 */ 558 uint64_t isp_intcnt; /* total int count */ 559 uint64_t isp_intbogus; /* spurious int count */ 560 uint64_t isp_intmboxc; /* mbox completions */ 561 uint64_t isp_intoasync; /* other async */ 562 uint64_t isp_rsltccmplt; /* CMDs on result q */ 563 uint64_t isp_fphccmplt; /* CMDs via fastpost */ 564 uint16_t isp_rscchiwater; 565 uint16_t isp_fpcchiwater; 566 NANOTIME_T isp_init_time; /* time were last initialized */ 567 568 /* 569 * Volatile state 570 */ 571 572 volatile uint32_t : 8, 573 : 2, 574 isp_dead : 1, 575 : 1, 576 isp_mboxbsy : 1, /* mailbox command active */ 577 isp_state : 3, 578 isp_nactive : 16; /* how many commands active */ 579 volatile mbreg_t isp_curmbx; /* currently active mailbox command */ 580 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 581 volatile uint32_t isp_reqidx; /* index of next request */ 582 volatile uint32_t isp_residx; /* index of last ISP write */ 583 volatile uint32_t isp_resodx; /* index of next result */ 584 volatile uint32_t isp_atioodx; /* index of next ATIO */ 585 volatile uint32_t isp_obits; /* mailbox command output */ 586 volatile uint32_t isp_serno; /* rolling serial number */ 587 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 588 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */ 589 volatile uint16_t isp_mbxwrk0; 590 volatile uint16_t isp_mbxwrk1; 591 volatile uint16_t isp_mbxwrk2; 592 volatile uint16_t isp_mbxwrk8; 593 volatile uint16_t isp_seqno; /* running sequence number */ 594 void * isp_mbxworkp; 595 596 /* 597 * Active commands are stored here, indexed by handle functions. 598 */ 599 isp_hdl_t *isp_xflist; 600 isp_hdl_t *isp_xffree; 601 602 /* 603 * DMA mapped in area for synchronous IOCB requests. 604 */ 605 void * isp_iocb; 606 XS_DMA_ADDR_T isp_iocb_dma; 607 608 /* 609 * request/result queue pointers and DMA handles for them. 610 */ 611 void * isp_rquest; 612 void * isp_result; 613 XS_DMA_ADDR_T isp_rquest_dma; 614 XS_DMA_ADDR_T isp_result_dma; 615 #ifdef ISP_TARGET_MODE 616 /* for 24XX only */ 617 void * isp_atioq; 618 XS_DMA_ADDR_T isp_atioq_dma; 619 #endif 620 }; 621 622 #define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)]) 623 #define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)]) 624 625 #define ISP_SET_SENDMARKER(isp, chan, val) \ 626 if (IS_FC(isp)) { \ 627 FCPARAM(isp, chan)->sendmarker = val; \ 628 } else { \ 629 SDPARAM(isp, chan)->sendmarker = val; \ 630 } 631 632 #define ISP_TST_SENDMARKER(isp, chan) \ 633 (IS_FC(isp)? \ 634 FCPARAM(isp, chan)->sendmarker != 0 : \ 635 SDPARAM(isp, chan)->sendmarker != 0) 636 637 /* 638 * ISP Driver Run States 639 */ 640 #define ISP_NILSTATE 0 641 #define ISP_CRASHED 1 642 #define ISP_RESETSTATE 2 643 #define ISP_INITSTATE 3 644 #define ISP_RUNSTATE 4 645 646 /* 647 * ISP Runtime Configuration Options 648 */ 649 #define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 650 #define ISP_CFG_PORT_PREF 0x0e /* Mask for Port Prefs (all FC except 2100) */ 651 #define ISP_CFG_PORT_DEF 0x00 /* prefer connection type from NVRAM */ 652 #define ISP_CFG_LPORT_ONLY 0x02 /* insist on {N/F}L-Port connection */ 653 #define ISP_CFG_NPORT_ONLY 0x04 /* insist on {N/F}-Port connection */ 654 #define ISP_CFG_LPORT 0x06 /* prefer {N/F}L-Port connection */ 655 #define ISP_CFG_NPORT 0x08 /* prefer {N/F}-Port connection */ 656 #define ISP_CFG_1GB 0x10 /* force 1GB connection (23XX only) */ 657 #define ISP_CFG_2GB 0x20 /* force 2GB connection (23XX only) */ 658 #define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 659 #define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 660 #define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 661 #define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 662 #define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 663 #define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 664 #define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */ 665 #define ISP_CFG_4GB 0x2000 /* force 4GB connection (24XX only) */ 666 #define ISP_CFG_8GB 0x4000 /* force 8GB connection (25XX only) */ 667 #define ISP_CFG_16GB 0x8000 /* force 16GB connection (82XX only) */ 668 669 /* 670 * For each channel, the outer layers should know what role that channel 671 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 672 * ISP_ROLE_BOTH. 673 * 674 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 675 * NVRAM read, and defaults set, but any further initialization (e.g. 676 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 677 * 678 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 679 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 680 * 681 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 682 * needs to be enabled, or will even work. What happens with the 2X00 cards 683 * here is that if you have enabled it with TARGET MODE as part of the ICB 684 * options, but you haven't given the f/w any ram resources for ATIOs or 685 * Immediate Notifies, the f/w just handles what it can and you never see 686 * anything. Basically, it sends a single byte of data (the first byte, 687 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 688 * INQUIRY, and sends back QUEUE FULL status for any other command. 689 * 690 */ 691 #define ISP_ROLE_NONE 0x0 692 #define ISP_ROLE_TARGET 0x1 693 #define ISP_ROLE_INITIATOR 0x2 694 #define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 695 #define ISP_ROLE_EITHER ISP_ROLE_BOTH 696 #ifndef ISP_DEFAULT_ROLES 697 /* 698 * Counterintuitively, we prefer to default to role 'none' 699 * if we are enable target mode support. This gives us the 700 * maximum flexibility as to which port will do what. 701 */ 702 #ifdef ISP_TARGET_MODE 703 #define ISP_DEFAULT_ROLES ISP_ROLE_NONE 704 #else 705 #define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 706 #endif 707 #endif 708 709 710 /* 711 * Firmware related defines 712 */ 713 #define ISP_CODE_ORG 0x1000 /* default f/w code start */ 714 #define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 715 #define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 716 #define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 717 #define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 718 #define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 719 #define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 720 #define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 721 #define ISP_FW_MAJORX(xp) (xp[0]) 722 #define ISP_FW_MINORX(xp) (xp[1]) 723 #define ISP_FW_MICROX(xp) (xp[2]) 724 #define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 725 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 726 #define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 727 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 728 729 /* 730 * Bus (implementation) types 731 */ 732 #define ISP_BT_PCI 0 /* PCI Implementations */ 733 #define ISP_BT_SBUS 1 /* SBus Implementations */ 734 735 /* 736 * If we have not otherwise defined SBus support away make sure 737 * it is defined here such that the code is included as default 738 */ 739 #ifndef ISP_SBUS_SUPPORTED 740 #define ISP_SBUS_SUPPORTED 1 741 #endif 742 743 /* 744 * Chip Types 745 */ 746 #define ISP_HA_SCSI 0xf 747 #define ISP_HA_SCSI_UNKNOWN 0x1 748 #define ISP_HA_SCSI_1020 0x2 749 #define ISP_HA_SCSI_1020A 0x3 750 #define ISP_HA_SCSI_1040 0x4 751 #define ISP_HA_SCSI_1040A 0x5 752 #define ISP_HA_SCSI_1040B 0x6 753 #define ISP_HA_SCSI_1040C 0x7 754 #define ISP_HA_SCSI_1240 0x8 755 #define ISP_HA_SCSI_1080 0x9 756 #define ISP_HA_SCSI_1280 0xa 757 #define ISP_HA_SCSI_10160 0xb 758 #define ISP_HA_SCSI_12160 0xc 759 #define ISP_HA_FC 0xf0 760 #define ISP_HA_FC_2100 0x10 761 #define ISP_HA_FC_2200 0x20 762 #define ISP_HA_FC_2300 0x30 763 #define ISP_HA_FC_2312 0x40 764 #define ISP_HA_FC_2322 0x50 765 #define ISP_HA_FC_2400 0x60 766 #define ISP_HA_FC_2500 0x70 767 #define ISP_HA_FC_2600 0x80 768 769 #define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 770 #define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240) 771 #define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 772 #define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 773 #define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 774 #define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160) 775 #define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160) 776 777 #define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp)) 778 #define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp)) 779 #define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp)) 780 #define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp)) 781 #define IS_ULTRA3(isp) (IS_1X160(isp)) 782 783 #define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC) 784 #define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100) 785 #define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200) 786 #define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \ 787 (isp)->isp_type < ISP_HA_FC_2400) 788 #define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300) 789 #define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312) 790 #define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322) 791 #define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400) 792 #define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 793 #define IS_26XX(isp) ((isp)->isp_type >= ISP_HA_FC_2600) 794 795 /* 796 * DMA related macros 797 */ 798 #define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 799 #define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 800 #define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 801 #define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 802 803 #define DMA_LO32(x) ((uint32_t) (x)) 804 #define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 805 806 /* 807 * Core System Function Prototypes 808 */ 809 810 /* 811 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 812 */ 813 void isp_reset(ispsoftc_t *, int); 814 815 /* 816 * Initialize Hardware to known state 817 */ 818 void isp_init(ispsoftc_t *); 819 820 /* 821 * Reset the ISP and call completion for any orphaned commands. 822 */ 823 int isp_reinit(ispsoftc_t *, int); 824 825 /* 826 * Internal Interrupt Service Routine 827 * 828 * The outer layers do the spade work to get the appropriate status register, 829 * semaphore register and first mailbox register (if appropriate). This also 830 * means that most spurious/bogus interrupts not for us can be filtered first. 831 */ 832 void isp_intr(ispsoftc_t *, uint16_t, uint16_t, uint16_t); 833 834 835 /* 836 * Command Entry Point- Platform Dependent layers call into this 837 */ 838 int isp_start(XS_T *); 839 840 /* these values are what isp_start returns */ 841 #define CMD_COMPLETE 101 /* command completed */ 842 #define CMD_EAGAIN 102 /* busy- maybe retry later */ 843 #define CMD_QUEUED 103 /* command has been queued for execution */ 844 #define CMD_RQLATER 104 /* requeue this command later */ 845 846 /* 847 * Command Completion Point- Core layers call out from this with completed cmds 848 */ 849 void isp_done(XS_T *); 850 851 /* 852 * Platform Dependent to External to Internal Control Function 853 * 854 * Assumes locks are held on entry. You should note that with many of 855 * these commands locks may be released while this function is called. 856 * 857 * ... ISPCTL_RESET_BUS, int channel); 858 * Reset BUS on this channel 859 * ... ISPCTL_RESET_DEV, int channel, int target); 860 * Reset Device on this channel at this target. 861 * ... ISPCTL_ABORT_CMD, XS_T *xs); 862 * Abort active transaction described by xs. 863 * ... IPCTL_UPDATE_PARAMS); 864 * Update any operating parameters (speed, etc.) 865 * ... ISPCTL_FCLINK_TEST, int channel); 866 * Test FC link status on this channel 867 * ... ISPCTL_SCAN_LOOP, int channel); 868 * Scan local loop on this channel 869 * ... ISPCTL_SCAN_FABRIC, int channel); 870 * Scan fabric on this channel 871 * ... ISPCTL_PDB_SYNC, int channel); 872 * Synchronize port database on this channel 873 * ... ISPCTL_SEND_LIP, int channel); 874 * Send a LIP on this channel 875 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 876 * Get a WWNN/WWPN for this N-port handle on this channel 877 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 878 * Run this mailbox command 879 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 880 * Get PDB on this channel for this N-port handle 881 * ... ISPCTL_PLOGX, isp_plcmd_t *) 882 * Performa a port login/logout 883 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 884 * Change role of specified channel 885 * 886 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 887 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 888 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 889 * and logging out of fabric devices (if one is on a fabric) and then marking 890 * the 'loop state' as being ready to now be used for sending commands to 891 * devices. 892 */ 893 typedef enum { 894 ISPCTL_RESET_BUS, 895 ISPCTL_RESET_DEV, 896 ISPCTL_ABORT_CMD, 897 ISPCTL_UPDATE_PARAMS, 898 ISPCTL_FCLINK_TEST, 899 ISPCTL_SCAN_FABRIC, 900 ISPCTL_SCAN_LOOP, 901 ISPCTL_PDB_SYNC, 902 ISPCTL_SEND_LIP, 903 ISPCTL_GET_NAMES, 904 ISPCTL_RUN_MBOXCMD, 905 ISPCTL_GET_PDB, 906 ISPCTL_PLOGX, 907 ISPCTL_CHANGE_ROLE 908 } ispctl_t; 909 int isp_control(ispsoftc_t *, ispctl_t, ...); 910 911 /* 912 * Platform Dependent to Internal to External Control Function 913 */ 914 915 typedef enum { 916 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */ 917 ISPASYNC_BUS_RESET, /* All Bus Was Reset */ 918 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 919 ISPASYNC_LOOP_UP, /* FC Loop Up */ 920 ISPASYNC_LIP, /* FC LIP Received */ 921 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 922 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 923 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 924 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 925 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 926 ISPASYNC_DEV_GONE, /* FC Device Departure */ 927 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 928 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 929 ISPASYNC_TARGET_ACTION, /* All target action requested */ 930 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 931 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 932 } ispasync_t; 933 void isp_async(ispsoftc_t *, ispasync_t, ...); 934 935 #define ISPASYNC_CHANGE_PDB 0 936 #define ISPASYNC_CHANGE_SNS 1 937 #define ISPASYNC_CHANGE_OTHER 2 938 939 /* 940 * Platform Independent Error Prinout 941 */ 942 void isp_prt_endcmd(ispsoftc_t *, XS_T *); 943 944 /* 945 * Platform Dependent Error and Debug Printout 946 * 947 * Two required functions for each platform must be provided: 948 * 949 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 950 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 951 * 952 * but due to compiler differences on different platforms this won't be 953 * formally defined here. Instead, they go in each platform definition file. 954 */ 955 956 #define ISP_LOGALL 0x0 /* log always */ 957 #define ISP_LOGCONFIG 0x1 /* log configuration messages */ 958 #define ISP_LOGINFO 0x2 /* log informational messages */ 959 #define ISP_LOGWARN 0x4 /* log warning messages */ 960 #define ISP_LOGERR 0x8 /* log error messages */ 961 #define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 962 #define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 963 #define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 964 #define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 965 #define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 966 #define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 967 #define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 968 #define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 969 #define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 970 #define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 971 #define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 972 973 /* 974 * Each Platform provides it's own isposinfo substructure of the ispsoftc 975 * defined above. 976 * 977 * Each platform must also provide the following macros/defines: 978 * 979 * 980 * ISP_FC_SCRLEN FC scratch area DMA length 981 * 982 * ISP_MEMZERO(dst, src) platform zeroing function 983 * ISP_MEMCPY(dst, src, count) platform copying function 984 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 985 * ISP_DELAY(usecs) microsecond spindelay function 986 * ISP_SLEEP(isp, usecs) microsecond sleep function 987 * 988 * ISP_INLINE ___inline or not- depending on how 989 * good your debugger is 990 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 991 * 992 * NANOTIME_T nanosecond time type 993 * 994 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 995 * 996 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 997 * 998 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 999 * subtract two NANOTIME_T values 1000 * 1001 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 1002 * for this particular board type 1003 * 1004 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 1005 * 1006 * Function/Macro the provides memory synchronization on 1007 * various objects so that the ISP's and the system's view 1008 * of the same object is consistent. 1009 * 1010 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs 1011 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done 1012 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee 1013 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs 1014 * 1015 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 1016 * return -1 if you cannot 1017 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 1018 * 1019 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 1020 * 1021 * SCSI_GOOD SCSI 'Good' Status 1022 * SCSI_CHECK SCSI 'Check Condition' Status 1023 * SCSI_BUSY SCSI 'Busy' Status 1024 * SCSI_QFULL SCSI 'Queue Full' Status 1025 * 1026 * XS_T Platform SCSI transaction type (i.e., command for HBA) 1027 * XS_DMA_ADDR_T Platform PCI DMA Address Type 1028 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value 1029 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 1030 * XS_ISP(xs) gets an instance out of an XS_T 1031 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 1032 * XS_TGT(xs) gets the target "" 1033 * XS_LUN(xs) gets the lun "" 1034 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 1035 * XS_CDBLEN(xs) gets the CDB's length "" 1036 * XS_XFRLEN(xs) gets the associated data transfer length "" 1037 * XS_TIME(xs) gets the time (in milliseconds) for this command 1038 * XS_GET_RESID(xs) gets the current residual count 1039 * XS_GET_RESID(xs, resid) sets the current residual count 1040 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 1041 * XS_SNSP(xs) gets a pointer to the associate sense data 1042 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 1043 * XS_CUR_SNSLEN(xs) gets the currently used length of sense data storage 1044 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 1045 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 1046 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 1047 * XS_TAG_P(xs) predicate of whether this command should be tagged 1048 * XS_TAG_TYPE(xs) which type of tag to use 1049 * XS_SETERR(xs) set error state 1050 * 1051 * HBA_NOERROR command has no erros 1052 * HBA_BOTCH hba botched something 1053 * HBA_CMDTIMEOUT command timed out 1054 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 1055 * HBA_TGTBSY target returned a BUSY status 1056 * HBA_BUSRESET bus reset destroyed command 1057 * HBA_ABORTED command was aborted (by request) 1058 * HBA_DATAOVR a data overrun was detected 1059 * HBA_ARQFAIL Automatic Request Sense failed 1060 * 1061 * XS_ERR(xs) return current error state 1062 * XS_NOERR(xs) there is no error currently set 1063 * XS_INITERR(xs) initialize error state 1064 * 1065 * XS_SAVE_SENSE(xs, sp, total_len, this_len) save sense data (total and current amount) 1066 * 1067 * XS_APPEND_SENSE(xs, sp, len) append more sense data 1068 * 1069 * XS_SENSE_VALID(xs) indicates whether sense is valid 1070 * 1071 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 1072 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle 1073 * 1074 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 1075 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID 1076 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 1077 * 1078 * These establish reasonable defaults for each platform. 1079 * These must be available independent of card NVRAM and are 1080 * to be used should NVRAM not be readable. 1081 * 1082 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 1083 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 1084 * 1085 * These defines are hooks to allow the setting of node and 1086 * port WWNs when NVRAM cannot be read or is to be overriden. 1087 * 1088 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 1089 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 1090 * 1091 * After NVRAM is read, these will be invoked to get the 1092 * node and port WWNs that will actually be used for this 1093 * channel. 1094 * 1095 * 1096 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 1097 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 1098 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 1099 * 1100 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 1101 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 1102 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 1103 * 1104 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 1105 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 1106 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 1107 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 1108 */ 1109 1110 #ifdef ISP_TARGET_MODE 1111 /* 1112 * The functions below are for the publicly available 1113 * target mode functions that are internal to the Qlogic driver. 1114 */ 1115 1116 /* 1117 * This function handles new response queue entry appropriate for target mode. 1118 */ 1119 int isp_target_notify(ispsoftc_t *, void *, uint32_t *); 1120 1121 /* 1122 * This function externalizes the ability to acknowledge an Immediate Notify request. 1123 */ 1124 int isp_notify_ack(ispsoftc_t *, void *); 1125 1126 /* 1127 * This function externalized acknowledging (success/fail) an ABTS frame 1128 */ 1129 int isp_acknak_abts(ispsoftc_t *, void *, int); 1130 1131 /* 1132 * General request queue 'put' routine for target mode entries. 1133 */ 1134 int isp_target_put_entry(ispsoftc_t *isp, void *); 1135 1136 /* 1137 * General routine to put back an ATIO entry- 1138 * used for replenishing f/w resource counts. 1139 * The argument is a pointer to a source ATIO 1140 * or ATIO2. 1141 */ 1142 int isp_target_put_atio(ispsoftc_t *, void *); 1143 1144 /* 1145 * General routine to send a final CTIO for a command- used mostly for 1146 * local responses. 1147 */ 1148 int isp_endcmd(ispsoftc_t *, ...); 1149 #define ECMD_SVALID 0x100 1150 #define ECMD_TERMINATE 0x200 1151 1152 /* 1153 * Handle an asynchronous event 1154 * 1155 * Return nonzero if the interrupt that generated this event has been dismissed. 1156 */ 1157 int isp_target_async(ispsoftc_t *, int, int); 1158 #endif 1159 #endif /* _ISPVAR_H */ 1160