1 /* $Id: isp.c,v 1.11 1999/01/10 11:15:22 mjacob Exp $ */ 2 /* release_01_29_99 */ 3 /* 4 * Machine and OS Independent (well, as best as possible) 5 * code for the Qlogic ISP SCSI adapters. 6 * 7 *--------------------------------------- 8 * Copyright (c) 1997, 1998 by Matthew Jacob 9 * NASA/Ames Research Center 10 * All rights reserved. 11 *--------------------------------------- 12 * 13 * Redistribution and use in source and binary forms, with or without 14 * modification, are permitted provided that the following conditions 15 * are met: 16 * 1. Redistributions of source code must retain the above copyright 17 * notice immediately at the beginning of the file, without modification, 18 * this list of conditions, and the following disclaimer. 19 * 2. Redistributions in binary form must reproduce the above copyright 20 * notice, this list of conditions and the following disclaimer in the 21 * documentation and/or other materials provided with the distribution. 22 * 3. The name of the author may not be used to endorse or promote products 23 * derived from this software without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 29 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 35 * SUCH DAMAGE. 36 */ 37 38 /* 39 * Inspiration and ideas about this driver are from Erik Moe's Linux driver 40 * (qlogicisp.c) and Dave Miller's SBus version of same (qlogicisp.c). Some 41 * ideas dredged from the Solaris driver. 42 */ 43 44 /* 45 * Include header file appropriate for platform we're building on. 46 */ 47 48 #ifdef __NetBSD__ 49 #include <dev/ic/isp_netbsd.h> 50 #endif 51 #ifdef __FreeBSD__ 52 #include <dev/isp/isp_freebsd.h> 53 #endif 54 #ifdef __linux__ 55 #include "isp_linux.h" 56 #endif 57 58 /* 59 * General defines 60 */ 61 62 #define MBOX_DELAY_COUNT 1000000 / 100 63 64 /* 65 * Local static data 66 */ 67 #ifdef ISP_TARGET_MODE 68 static const char tgtiqd[36] = { 69 0x03, 0x00, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 70 0x51, 0x4C, 0x4F, 0x47, 0x49, 0x43, 0x20, 0x20, 71 #ifdef __NetBSD__ 72 0x4E, 0x45, 0x54, 0x42, 0x53, 0x44, 0x20, 0x20, 73 #else 74 # ifdef __FreeBSD__ 75 0x46, 0x52, 0x45, 0x45, 0x42, 0x52, 0x44, 0x20, 76 # else 77 # ifdef linux 78 0x4C, 0x49, 0x4E, 0x55, 0x58, 0x20, 0x20, 0x20, 79 # else 80 # endif 81 # endif 82 #endif 83 0x54, 0x41, 0x52, 0x47, 0x45, 0x54, 0x20, 0x20, 84 0x20, 0x20, 0x20, 0x31 85 }; 86 #endif 87 88 89 /* 90 * Local function prototypes. 91 */ 92 static int isp_parse_async __P((struct ispsoftc *, int)); 93 static int isp_handle_other_response 94 __P((struct ispsoftc *, ispstatusreq_t *, u_int8_t *)); 95 #ifdef ISP_TARGET_MODE 96 static int isp_modify_lun __P((struct ispsoftc *, int, int, int)); 97 static void isp_notify_ack __P((struct ispsoftc *, void *)); 98 static void isp_handle_atio __P((struct ispsoftc *, void *)); 99 static void isp_handle_atio2 __P((struct ispsoftc *, void *)); 100 static void isp_handle_ctio __P((struct ispsoftc *, void *)); 101 static void isp_handle_ctio2 __P((struct ispsoftc *, void *)); 102 #endif 103 static void isp_parse_status 104 __P((struct ispsoftc *, ispstatusreq_t *, ISP_SCSI_XFER_T *)); 105 static void isp_fibre_init __P((struct ispsoftc *)); 106 static void isp_fw_state __P((struct ispsoftc *)); 107 static void isp_dumpregs __P((struct ispsoftc *, const char *)); 108 static void isp_dumpxflist __P((struct ispsoftc *)); 109 static void isp_prtstst __P((ispstatusreq_t *)); 110 static char *isp2100_fw_statename __P((int)); 111 static void isp_mboxcmd __P((struct ispsoftc *, mbreg_t *)); 112 113 static void isp_update __P((struct ispsoftc *)); 114 static void isp_setdfltparm __P((struct ispsoftc *)); 115 static int isp_read_nvram __P((struct ispsoftc *)); 116 static void isp_rdnvram_word __P((struct ispsoftc *, int, u_int16_t *)); 117 118 /* 119 * Reset Hardware. 120 * 121 * Hit the chip over the head, download new f/w and set it running. 122 * 123 * Locking done elsewhere. 124 */ 125 void 126 isp_reset(isp) 127 struct ispsoftc *isp; 128 { 129 static char once = 1; 130 mbreg_t mbs; 131 int loops, i, dodnld = 1; 132 char *revname; 133 134 isp->isp_state = ISP_NILSTATE; 135 136 /* 137 * Basic types (SCSI, FibreChannel and PCI or SBus) 138 * have been set in the MD code. We figure out more 139 * here. 140 */ 141 isp->isp_dblev = DFLT_DBLEVEL; 142 143 /* 144 * Get the current running firmware revision out of the 145 * chip before we hit it over the head (if this is our 146 * first time through). Note that we store this as the 147 * 'ROM' firmware revision- which it may not be. In any 148 * case, we don't really use this yet, but we may in 149 * the future. 150 */ 151 if (once == 1) { 152 /* 153 * Just in case it was paused... 154 */ 155 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 156 once = 0; 157 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 158 isp_mboxcmd(isp, &mbs); 159 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 160 /* 161 * If this fails, it probably means we're running 162 * an old prom, if anything at all... 163 */ 164 isp->isp_romfw_rev = 0; 165 } else { 166 isp->isp_romfw_rev = 167 (((u_int16_t) mbs.param[1]) << 10) + mbs.param[2]; 168 } 169 } 170 171 /* 172 * Put it into PAUSE mode. 173 */ 174 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 175 176 if (isp->isp_type & ISP_HA_FC) { 177 revname = "2100"; 178 } else { 179 sdparam *sdp = isp->isp_param; 180 i = ISP_READ(isp, BIU_CONF0) & BIU_CONF0_HW_MASK; 181 switch (i) { 182 default: 183 PRINTF("%s: unknown chip rev. 0x%x- assuming a 1020\n", 184 isp->isp_name, i); 185 /* FALLTHROUGH */ 186 case 1: 187 revname = "1020"; 188 isp->isp_type = ISP_HA_SCSI_1020; 189 sdp->isp_clock = 40; 190 break; 191 case 2: 192 /* 193 * Some 1020A chips are Ultra Capable, but don't 194 * run the clock rate up for that unless told to 195 * do so by the Ultra Capable bits being set. 196 */ 197 revname = "1020A"; 198 isp->isp_type = ISP_HA_SCSI_1020A; 199 sdp->isp_clock = 40; 200 break; 201 case 3: 202 revname = "1040"; 203 isp->isp_type = ISP_HA_SCSI_1040; 204 sdp->isp_clock = 60; 205 break; 206 case 4: 207 revname = "1040A"; 208 isp->isp_type = ISP_HA_SCSI_1040A; 209 sdp->isp_clock = 60; 210 break; 211 case 5: 212 revname = "1040B"; 213 isp->isp_type = ISP_HA_SCSI_1040B; 214 sdp->isp_clock = 60; 215 break; 216 } 217 /* 218 * Now, while we're at it, gather info about ultra 219 * and/or differential mode. 220 */ 221 if (isp->isp_bustype != ISP_BT_SBUS) { 222 ISP_SETBITS(isp, BIU_CONF1, BIU_PCI_CONF1_SXP); 223 } 224 if (ISP_READ(isp, SXP_PINS_DIFF) & SXP_PINS_DIFF_MODE) { 225 PRINTF("%s: Differential Mode\n", isp->isp_name); 226 sdp->isp_diffmode = 1; 227 } else { 228 sdp->isp_diffmode = 0; 229 } 230 i = ISP_READ(isp, RISC_PSR); 231 if (isp->isp_bustype == ISP_BT_SBUS) { 232 i &= RISC_PSR_SBUS_ULTRA; 233 } else { 234 i &= RISC_PSR_PCI_ULTRA; 235 } 236 if (isp->isp_bustype != ISP_BT_SBUS) { 237 ISP_CLRBITS(isp, BIU_CONF1, BIU_PCI_CONF1_SXP); 238 } 239 if (i != 0) { 240 PRINTF("%s: Ultra Mode Capable\n", isp->isp_name); 241 sdp->isp_ultramode = 1; 242 sdp->isp_clock = 60; 243 } else { 244 sdp->isp_ultramode = 0; 245 sdp->isp_clock = 40; 246 } 247 248 /* 249 * Machine dependent clock (if set) overrides 250 * our generic determinations. 251 */ 252 if (isp->isp_mdvec->dv_clock) { 253 if (isp->isp_mdvec->dv_clock < sdp->isp_clock) { 254 sdp->isp_clock = isp->isp_mdvec->dv_clock; 255 } 256 } 257 258 } 259 260 /* 261 * Do MD specific pre initialization 262 */ 263 ISP_RESET0(isp); 264 265 again: 266 267 /* 268 * Hit the chip over the head with hammer, 269 * and give the ISP a chance to recover. 270 */ 271 272 if (isp->isp_type & ISP_HA_SCSI) { 273 ISP_WRITE(isp, BIU_ICR, BIU_ICR_SOFT_RESET); 274 /* 275 * A slight delay... 276 */ 277 SYS_DELAY(100); 278 279 /* 280 * Clear data && control DMA engines. 281 */ 282 ISP_WRITE(isp, CDMA_CONTROL, 283 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 284 ISP_WRITE(isp, DDMA_CONTROL, 285 DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT); 286 } else { 287 ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET); 288 /* 289 * A slight delay... 290 */ 291 SYS_DELAY(100); 292 293 /* 294 * Clear data && control DMA engines. 295 */ 296 ISP_WRITE(isp, CDMA2100_CONTROL, 297 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 298 ISP_WRITE(isp, TDMA2100_CONTROL, 299 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 300 ISP_WRITE(isp, RDMA2100_CONTROL, 301 DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT); 302 } 303 304 /* 305 * Wait for ISP to be ready to go... 306 */ 307 loops = MBOX_DELAY_COUNT; 308 for (;;) { 309 if (isp->isp_type & ISP_HA_SCSI) { 310 if (!(ISP_READ(isp, BIU_ICR) & BIU_ICR_SOFT_RESET)) 311 break; 312 } else { 313 if (!(ISP_READ(isp, BIU2100_CSR) & BIU2100_SOFT_RESET)) 314 break; 315 } 316 SYS_DELAY(100); 317 if (--loops < 0) { 318 isp_dumpregs(isp, "chip reset timed out"); 319 return; 320 } 321 } 322 323 /* 324 * After we've fired this chip up, zero out the conf1 register 325 * for SCSI adapters and other settings for the 2100. 326 */ 327 328 if (isp->isp_type & ISP_HA_SCSI) { 329 ISP_WRITE(isp, BIU_CONF1, 0); 330 } else { 331 ISP_WRITE(isp, BIU2100_CSR, 0); 332 } 333 334 /* 335 * Reset RISC Processor 336 */ 337 ISP_WRITE(isp, HCCR, HCCR_CMD_RESET); 338 SYS_DELAY(100); 339 340 /* 341 * Establish some initial burst rate stuff. 342 * (only for the 1XX0 boards). This really should 343 * be done later after fetching from NVRAM. 344 */ 345 if (isp->isp_type & ISP_HA_SCSI) { 346 u_int16_t tmp = isp->isp_mdvec->dv_conf1; 347 /* 348 * Busted FIFO. Turn off all but burst enables. 349 */ 350 if (isp->isp_type == ISP_HA_SCSI_1040A) { 351 tmp &= BIU_BURST_ENABLE; 352 } 353 ISP_SETBITS(isp, BIU_CONF1, tmp); 354 if (tmp & BIU_BURST_ENABLE) { 355 ISP_SETBITS(isp, CDMA_CONF, DMA_ENABLE_BURST); 356 ISP_SETBITS(isp, DDMA_CONF, DMA_ENABLE_BURST); 357 } 358 #ifdef PTI_CARDS 359 if (((sdparam *) isp->isp_param)->isp_ultramode) { 360 while(ISP_READ(isp, RISC_MTR) != 0x1313) { 361 ISP_WRITE(isp, RISC_MTR, 0x1313); 362 ISP_WRITE(isp, HCCR, HCCR_CMD_STEP); 363 } 364 } else { 365 ISP_WRITE(isp, RISC_MTR, 0x1212); 366 } 367 /* 368 * PTI specific register 369 */ 370 ISP_WRITE(isp, RISC_EMB, DUAL_BANK) 371 #else 372 ISP_WRITE(isp, RISC_MTR, 0x1212); 373 #endif 374 } else { 375 ISP_WRITE(isp, RISC_MTR2100, 0x1212); 376 } 377 378 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); /* release paused processor */ 379 380 /* 381 * Do MD specific post initialization 382 */ 383 ISP_RESET1(isp); 384 385 /* 386 * Enable interrupts 387 */ 388 ENABLE_INTS(isp); 389 390 /* 391 * Wait for everything to finish firing up... 392 */ 393 loops = MBOX_DELAY_COUNT; 394 while (ISP_READ(isp, OUTMAILBOX0) == MBOX_BUSY) { 395 SYS_DELAY(100); 396 if (--loops < 0) { 397 PRINTF("%s: MBOX_BUSY never cleared on reset\n", 398 isp->isp_name); 399 return; 400 } 401 } 402 403 /* 404 * Up until this point we've done everything by just reading or 405 * setting registers. From this point on we rely on at least *some* 406 * kind of firmware running in the card. 407 */ 408 409 /* 410 * Do some sanity checking. 411 */ 412 mbs.param[0] = MBOX_NO_OP; 413 isp_mboxcmd(isp, &mbs); 414 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 415 isp_dumpregs(isp, "NOP test failed"); 416 return; 417 } 418 419 if (isp->isp_type & ISP_HA_SCSI) { 420 mbs.param[0] = MBOX_MAILBOX_REG_TEST; 421 mbs.param[1] = 0xdead; 422 mbs.param[2] = 0xbeef; 423 mbs.param[3] = 0xffff; 424 mbs.param[4] = 0x1111; 425 mbs.param[5] = 0xa5a5; 426 isp_mboxcmd(isp, &mbs); 427 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 428 isp_dumpregs(isp, 429 "Mailbox Register test didn't complete"); 430 return; 431 } 432 if (mbs.param[1] != 0xdead || mbs.param[2] != 0xbeef || 433 mbs.param[3] != 0xffff || mbs.param[4] != 0x1111 || 434 mbs.param[5] != 0xa5a5) { 435 isp_dumpregs(isp, "Register Test Failed"); 436 return; 437 } 438 439 } 440 441 /* 442 * Download new Firmware, unless requested not to do so. 443 * This is made slightly trickier in some cases where the 444 * firmware of the ROM revision is newer than the revision 445 * compiled into the driver. So, where we used to compare 446 * versions of our f/w and the ROM f/w, now we just see 447 * whether we have f/w at all and whether a config flag 448 * has disabled our download. 449 */ 450 if ((isp->isp_mdvec->dv_fwlen == 0) || 451 (isp->isp_confopts & ISP_CFG_NORELOAD)) { 452 dodnld = 0; 453 } 454 455 if (dodnld && isp->isp_mdvec->dv_fwlen) { 456 for (i = 0; i < isp->isp_mdvec->dv_fwlen; i++) { 457 mbs.param[0] = MBOX_WRITE_RAM_WORD; 458 mbs.param[1] = isp->isp_mdvec->dv_codeorg + i; 459 mbs.param[2] = isp->isp_mdvec->dv_ispfw[i]; 460 isp_mboxcmd(isp, &mbs); 461 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 462 PRINTF("%s: F/W download failed at word %d\n", 463 isp->isp_name, i); 464 dodnld = 0; 465 goto again; 466 } 467 } 468 469 /* 470 * Verify that it downloaded correctly. 471 */ 472 mbs.param[0] = MBOX_VERIFY_CHECKSUM; 473 mbs.param[1] = isp->isp_mdvec->dv_codeorg; 474 isp_mboxcmd(isp, &mbs); 475 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 476 isp_dumpregs(isp, "ram checksum failure"); 477 return; 478 } 479 } else { 480 IDPRINTF(3, ("%s: skipping f/w download\n", isp->isp_name)); 481 } 482 483 /* 484 * Now start it rolling. 485 * 486 * If we didn't actually download f/w, 487 * we still need to (re)start it. 488 */ 489 490 mbs.param[0] = MBOX_EXEC_FIRMWARE; 491 if (isp->isp_mdvec->dv_codeorg) 492 mbs.param[1] = isp->isp_mdvec->dv_codeorg; 493 else 494 mbs.param[1] = 0x1000; 495 isp_mboxcmd(isp, &mbs); 496 497 if (isp->isp_type & ISP_HA_SCSI) { 498 sdparam *sdp = isp->isp_param; 499 /* 500 * Set CLOCK RATE, but only if asked to. 501 */ 502 if (sdp->isp_clock) { 503 mbs.param[0] = MBOX_SET_CLOCK_RATE; 504 mbs.param[1] = sdp->isp_clock; 505 isp_mboxcmd(isp, &mbs); 506 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 507 isp_dumpregs(isp, "failed to set CLOCKRATE"); 508 /* but continue */ 509 } else { 510 IDPRINTF(3, ("%s: setting input clock to %d\n", 511 isp->isp_name, sdp->isp_clock)); 512 } 513 } 514 } 515 mbs.param[0] = MBOX_ABOUT_FIRMWARE; 516 isp_mboxcmd(isp, &mbs); 517 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 518 isp_dumpregs(isp, "ABOUT FIRMWARE command failed"); 519 return; 520 } 521 PRINTF("%s: Board Revision %s, %s F/W Revision %d.%d\n", 522 isp->isp_name, revname, dodnld? "loaded" : "resident", 523 mbs.param[1], mbs.param[2]); 524 isp->isp_fwrev = (((u_int16_t) mbs.param[1]) << 10) + mbs.param[2]; 525 if (isp->isp_romfw_rev && dodnld) { 526 PRINTF("%s: Last F/W revision was %d.%d\n", isp->isp_name, 527 isp->isp_romfw_rev >> 10, isp->isp_romfw_rev & 0x3ff); 528 } 529 isp_fw_state(isp); 530 isp->isp_state = ISP_RESETSTATE; 531 } 532 533 /* 534 * Initialize Parameters of Hardware to a known state. 535 * 536 * Locks are held before coming here. 537 */ 538 539 void 540 isp_init(isp) 541 struct ispsoftc *isp; 542 { 543 sdparam *sdp; 544 mbreg_t mbs; 545 int tgt; 546 547 /* 548 * Must do first. 549 */ 550 isp_setdfltparm(isp); 551 552 /* 553 * If we're fibre, we have a completely different 554 * initialization method. 555 */ 556 557 if (isp->isp_type & ISP_HA_FC) { 558 isp_fibre_init(isp); 559 return; 560 } 561 sdp = isp->isp_param; 562 563 /* 564 * Set (possibly new) Initiator ID. 565 */ 566 mbs.param[0] = MBOX_SET_INIT_SCSI_ID; 567 mbs.param[1] = sdp->isp_initiator_id; 568 isp_mboxcmd(isp, &mbs); 569 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 570 isp_dumpregs(isp, "failed to set initiator id"); 571 return; 572 } 573 574 /* 575 * Set Retry Delay and Count 576 */ 577 mbs.param[0] = MBOX_SET_RETRY_COUNT; 578 mbs.param[1] = sdp->isp_retry_count; 579 mbs.param[2] = sdp->isp_retry_delay; 580 isp_mboxcmd(isp, &mbs); 581 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 582 isp_dumpregs(isp, "failed to set retry count and delay"); 583 return; 584 } 585 586 /* 587 * Set ASYNC DATA SETUP time. This is very important. 588 */ 589 mbs.param[0] = MBOX_SET_ASYNC_DATA_SETUP_TIME; 590 mbs.param[1] = sdp->isp_async_data_setup; 591 isp_mboxcmd(isp, &mbs); 592 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 593 isp_dumpregs(isp, "failed to set async data setup time"); 594 return; 595 } 596 597 /* 598 * Set ACTIVE Negation State. 599 */ 600 mbs.param[0] = MBOX_SET_ACTIVE_NEG_STATE; 601 mbs.param[1] = 602 (sdp->isp_req_ack_active_neg << 4) | 603 (sdp->isp_data_line_active_neg << 5); 604 isp_mboxcmd(isp, &mbs); 605 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 606 isp_dumpregs(isp, "failed to set active neg state"); 607 return; 608 } 609 610 /* 611 * Set the Tag Aging limit 612 */ 613 614 mbs.param[0] = MBOX_SET_TAG_AGE_LIMIT; 615 mbs.param[1] = sdp->isp_tag_aging; 616 isp_mboxcmd(isp, &mbs); 617 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 618 isp_dumpregs(isp, "failed to set tag age limit"); 619 return; 620 } 621 622 /* 623 * Set selection timeout. 624 */ 625 626 mbs.param[0] = MBOX_SET_SELECT_TIMEOUT; 627 mbs.param[1] = sdp->isp_selection_timeout; 628 isp_mboxcmd(isp, &mbs); 629 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 630 isp_dumpregs(isp, "failed to set selection timeout"); 631 return; 632 } 633 634 /* 635 * Set per-target parameters to a safe minimum. 636 */ 637 638 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 639 int maxlun, lun; 640 641 if (sdp->isp_devparam[tgt].dev_enable == 0) 642 continue; 643 644 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 645 mbs.param[1] = tgt << 8; 646 mbs.param[2] = DPARM_SAFE_DFLT; 647 mbs.param[3] = 0; 648 /* 649 * It is not quite clear when this changed over so that 650 * we could force narrow and async, so assume >= 7.55. 651 * 652 * Otherwise, a SCSI bus reset issued below will force 653 * the back to the narrow, async state (but see note 654 * below also). Technically we should also do without 655 * Parity. 656 */ 657 if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) { 658 mbs.param[2] |= DPARM_NARROW | DPARM_ASYNC; 659 } 660 sdp->isp_devparam[tgt].cur_dflags = mbs.param[2] >> 8; 661 662 IDPRINTF(3, ("\n%s: tgt %d cflags %x offset %x period %x\n", 663 isp->isp_name, tgt, mbs.param[2], mbs.param[3] >> 8, 664 mbs.param[3] & 0xff)); 665 isp_mboxcmd(isp, &mbs); 666 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 667 668 PRINTF("%s: failed to set parameters for tgt %d\n", 669 isp->isp_name, tgt); 670 671 PRINTF("%s: flags %x offset %x period %x\n", 672 isp->isp_name, sdp->isp_devparam[tgt].dev_flags, 673 sdp->isp_devparam[tgt].sync_offset, 674 sdp->isp_devparam[tgt].sync_period); 675 676 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 677 mbs.param[1] = tgt << 8; 678 mbs.param[2] = DPARM_SAFE_DFLT; 679 mbs.param[3] = 0; 680 isp_mboxcmd(isp, &mbs); 681 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 682 PRINTF("%s: failed even to set defaults for " 683 "target %d\n", isp->isp_name, tgt); 684 continue; 685 } 686 } 687 688 maxlun = (isp->isp_fwrev >= ISP_FW_REV(7, 55))? 32 : 8; 689 for (lun = 0; lun < maxlun; lun++) { 690 mbs.param[0] = MBOX_SET_DEV_QUEUE_PARAMS; 691 mbs.param[1] = (tgt << 8) | lun; 692 mbs.param[2] = sdp->isp_max_queue_depth; 693 mbs.param[3] = sdp->isp_devparam[tgt].exc_throttle; 694 isp_mboxcmd(isp, &mbs); 695 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 696 PRINTF("%s: failed to set device queue " 697 "parameters for target %d, lun %d\n", 698 isp->isp_name, tgt, lun); 699 break; 700 } 701 } 702 /* 703 * And mark this as an unannounced device 704 */ 705 sdp->isp_devparam[tgt].dev_announced = 0; 706 } 707 708 /* 709 * Set up DMA for the request and result mailboxes. 710 */ 711 if (ISP_MBOXDMASETUP(isp) != 0) { 712 PRINTF("%s: can't setup dma mailboxes\n", isp->isp_name); 713 return; 714 } 715 716 mbs.param[0] = MBOX_INIT_RES_QUEUE; 717 mbs.param[1] = RESULT_QUEUE_LEN; 718 mbs.param[2] = (u_int16_t) (isp->isp_result_dma >> 16); 719 mbs.param[3] = (u_int16_t) (isp->isp_result_dma & 0xffff); 720 mbs.param[4] = 0; 721 mbs.param[5] = 0; 722 isp_mboxcmd(isp, &mbs); 723 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 724 isp_dumpregs(isp, "set of response queue failed"); 725 return; 726 } 727 isp->isp_residx = 0; 728 729 mbs.param[0] = MBOX_INIT_REQ_QUEUE; 730 mbs.param[1] = RQUEST_QUEUE_LEN; 731 mbs.param[2] = (u_int16_t) (isp->isp_rquest_dma >> 16); 732 mbs.param[3] = (u_int16_t) (isp->isp_rquest_dma & 0xffff); 733 mbs.param[4] = 0; 734 mbs.param[5] = 0; 735 isp_mboxcmd(isp, &mbs); 736 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 737 isp_dumpregs(isp, "set of request queue failed"); 738 return; 739 } 740 isp->isp_reqidx = isp->isp_reqodx = 0; 741 742 /* 743 * Turn on Fast Posting 744 */ 745 if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) { 746 mbs.param[0] = MBOX_SET_FW_FEATURES; 747 mbs.param[1] = FW_FEATURE_FAST_POST; 748 isp_mboxcmd(isp, &mbs); 749 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 750 PRINTF("%s: unable to enable FAST Posting\n", 751 isp->isp_name); 752 } 753 } 754 755 /* 756 * XXX: See whether or not for 7.55 F/W or later we 757 * XXX: can do without this, and see whether we should 758 * XXX: honor the NVRAM SCSI_RESET_DISABLE token. 759 */ 760 mbs.param[0] = MBOX_BUS_RESET; 761 mbs.param[1] = 3; 762 isp_mboxcmd(isp, &mbs); 763 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 764 isp_dumpregs(isp, "SCSI bus reset failed"); 765 } 766 /* 767 * This is really important to have set after a bus reset. 768 */ 769 isp->isp_sendmarker = 1; 770 isp->isp_state = ISP_INITSTATE; 771 } 772 773 /* 774 * Fibre Channel specific initialization. 775 * 776 * Locks are held before coming here. 777 */ 778 static void 779 isp_fibre_init(isp) 780 struct ispsoftc *isp; 781 { 782 fcparam *fcp; 783 isp_icb_t *icbp; 784 mbreg_t mbs; 785 int count, loopid; 786 u_int8_t lwfs; 787 788 fcp = isp->isp_param; 789 790 if (ISP_MBOXDMASETUP(isp) != 0) { 791 PRINTF("%s: can't setup DMA for mailboxes\n", isp->isp_name); 792 return; 793 } 794 /* 795 * For systems that don't have BIOS methods for which 796 * we can easily change the NVRAM based loopid, we'll 797 * override that here. Note that when we initialize 798 * the firmware we may get back a different loopid than 799 * we asked for anyway. XXX This is probably not the 800 * best way to figure this out XXX 801 */ 802 #ifndef __i386__ 803 loopid = DEFAULT_LOOPID; 804 #else 805 loopid = fcp->isp_loopid; 806 #endif 807 808 #if defined(ISP2100_FABRIC) && defined(ISP2100_SCCLUN) 809 PRINTF("%s: Fabric Support, Expanded Lun Support\n", isp->isp_name); 810 #endif 811 #if defined(ISP2100_FABRIC) && !defined(ISP2100_SCCLUN) 812 PRINTF("%s: Fabric Support\n", isp->isp_name); 813 #endif 814 #if !defined(ISP2100_FABRIC) && defined(ISP2100_SCCLUN) 815 PRINTF("%s: Expanded Lun Support\n", isp->isp_name); 816 #endif 817 818 icbp = (isp_icb_t *) fcp->isp_scratch; 819 MEMZERO(icbp, sizeof (*icbp)); 820 821 icbp->icb_version = ICB_VERSION1; 822 #ifdef ISP_TARGET_MODE 823 fcp->isp_fwoptions = ICBOPT_TGT_ENABLE|ICBOPT_INI_TGTTYPE; 824 #else 825 fcp->isp_fwoptions = 0; 826 #endif 827 fcp->isp_fwoptions |= ICBOPT_INI_ADISC|ICBOPT_FAIRNESS|ICBOPT_FAST_POST; 828 fcp->isp_fwoptions |= ICBOPT_PDBCHANGE_AE; 829 fcp->isp_fwoptions |= ICBOPT_HARD_ADDRESS; 830 #ifdef CHECKME 831 fcp->isp_fwoptions |= ICBOPT_USE_PORTNAME; 832 #endif 833 #ifdef THIS_WORKED 834 /* 835 * This has unhappiness in target mode 836 */ 837 fcp->isp_fwoptions |= ICBOPT_FULL_LOGIN; 838 #endif 839 840 icbp->icb_fwoptions = fcp->isp_fwoptions; 841 icbp->icb_maxfrmlen = fcp->isp_maxfrmlen; 842 if (icbp->icb_maxfrmlen < ICB_MIN_FRMLEN || 843 icbp->icb_maxfrmlen > ICB_MAX_FRMLEN) { 844 PRINTF("%s: bad frame length (%d) from NVRAM- using %d\n", 845 isp->isp_name, fcp->isp_maxfrmlen, ICB_DFLT_FRMLEN); 846 } 847 icbp->icb_maxalloc = fcp->isp_maxalloc; 848 icbp->icb_execthrottle = fcp->isp_execthrottle; 849 icbp->icb_retry_delay = fcp->isp_retry_delay; 850 icbp->icb_retry_count = fcp->isp_retry_count; 851 icbp->icb_hardaddr = loopid; 852 853 MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, fcp->isp_wwn); 854 if (icbp->icb_fwoptions & ICBOPT_USE_PORTNAME) { 855 u_int64_t portname = fcp->isp_wwn | (2LL << 56); 856 MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, portname); 857 } 858 icbp->icb_rqstqlen = RQUEST_QUEUE_LEN; 859 icbp->icb_rsltqlen = RESULT_QUEUE_LEN; 860 icbp->icb_rqstaddr[RQRSP_ADDR0015] = 861 (u_int16_t) (isp->isp_rquest_dma & 0xffff); 862 icbp->icb_rqstaddr[RQRSP_ADDR1631] = 863 (u_int16_t) (isp->isp_rquest_dma >> 16); 864 icbp->icb_respaddr[RQRSP_ADDR0015] = 865 (u_int16_t) (isp->isp_result_dma & 0xffff); 866 icbp->icb_respaddr[RQRSP_ADDR1631] = 867 (u_int16_t) (isp->isp_result_dma >> 16); 868 869 for (count = 0; count < 10; count++) { 870 mbs.param[0] = MBOX_INIT_FIRMWARE; 871 mbs.param[1] = 0; 872 mbs.param[2] = (u_int16_t) (fcp->isp_scdma >> 16); 873 mbs.param[3] = (u_int16_t) (fcp->isp_scdma & 0xffff); 874 mbs.param[4] = 0; 875 mbs.param[5] = 0; 876 mbs.param[6] = 0; 877 mbs.param[7] = 0; 878 879 isp_mboxcmd(isp, &mbs); 880 881 switch (mbs.param[0]) { 882 case MBOX_COMMAND_COMPLETE: 883 count = 10; 884 break; 885 case ASYNC_LIP_OCCURRED: 886 case ASYNC_LOOP_UP: 887 case ASYNC_LOOP_DOWN: 888 case ASYNC_LOOP_RESET: 889 case ASYNC_PDB_CHANGED: 890 case ASYNC_CHANGE_NOTIFY: 891 if (count > 9) { 892 PRINTF("%s: too many retries to get going- " 893 "giving up\n", isp->isp_name); 894 return; 895 } 896 break; 897 default: 898 isp_dumpregs(isp, "INIT FIRMWARE failed"); 899 return; 900 } 901 } 902 isp->isp_reqidx = isp->isp_reqodx = 0; 903 isp->isp_residx = 0; 904 905 /* 906 * Wait up to 5 seconds for FW to go to READY state. 907 */ 908 lwfs = FW_CONFIG_WAIT; 909 for (count = 0; count < 12000; count++) { 910 isp_fw_state(isp); 911 if (lwfs != fcp->isp_fwstate) { 912 PRINTF("%s: Firmware State %s -> %s\n", 913 isp->isp_name, isp2100_fw_statename((int)lwfs), 914 isp2100_fw_statename((int)fcp->isp_fwstate)); 915 lwfs = fcp->isp_fwstate; 916 } 917 if (fcp->isp_fwstate == FW_READY) { 918 break; 919 } 920 SYS_DELAY(1000); /* wait one millisecond */ 921 } 922 isp->isp_sendmarker = 1; 923 924 /* 925 * Get our Loop ID 926 * (if possible) 927 */ 928 if (fcp->isp_fwstate == FW_READY) { 929 mbs.param[0] = MBOX_GET_LOOP_ID; 930 isp_mboxcmd(isp, &mbs); 931 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 932 isp_dumpregs(isp, "GET LOOP ID failed"); 933 return; 934 } 935 fcp->isp_loopid = mbs.param[1]; 936 fcp->isp_alpa = mbs.param[2]; 937 PRINTF("%s: Loop ID %d, ALPA 0x%x\n", isp->isp_name, 938 fcp->isp_loopid, fcp->isp_alpa); 939 isp->isp_state = ISP_INITSTATE; 940 #ifdef ISP_TARGET_MODE 941 DISABLE_INTS(isp); 942 if (isp_modify_lun(isp, 0, 1, 1)) { 943 PRINTF("%s: failed to enable target mode\n", 944 isp->isp_name); 945 } 946 ENABLE_INTS(isp); 947 #endif 948 } else { 949 PRINTF("%s: failed to go to FW READY state- will not attach\n", 950 isp->isp_name); 951 } 952 } 953 954 /* 955 * Start a command. Locking is assumed done in the caller. 956 */ 957 958 int32_t 959 ispscsicmd(xs) 960 ISP_SCSI_XFER_T *xs; 961 { 962 struct ispsoftc *isp; 963 u_int8_t iptr, optr; 964 union { 965 ispreq_t *_reqp; 966 ispreqt2_t *_t2reqp; 967 } _u; 968 #define reqp _u._reqp 969 #define t2reqp _u._t2reqp 970 #define UZSIZE max(sizeof (ispreq_t), sizeof (ispreqt2_t)) 971 int i; 972 973 XS_INITERR(xs); 974 isp = XS_ISP(xs); 975 976 if (isp->isp_state != ISP_RUNSTATE) { 977 PRINTF("%s: adapter not ready\n", isp->isp_name); 978 XS_SETERR(xs, HBA_BOTCH); 979 return (CMD_COMPLETE); 980 } 981 982 /* 983 * We *could* do the different sequence type that has clos 984 * to the whole Queue Entry for the command,. 985 */ 986 if (XS_CDBLEN(xs) > ((isp->isp_type & ISP_HA_FC)? 16 : 12)) { 987 PRINTF("%s: unsupported cdb length (%d)\n", 988 isp->isp_name, XS_CDBLEN(xs)); 989 XS_SETERR(xs, HBA_BOTCH); 990 return (CMD_COMPLETE); 991 } 992 993 /* 994 * First check to see if any HBA or Device 995 * parameters need to be updated. 996 */ 997 if (isp->isp_update) { 998 isp_update(isp); 999 } 1000 1001 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1002 iptr = isp->isp_reqidx; 1003 1004 reqp = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1005 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1006 if (iptr == optr) { 1007 IDPRINTF(2, ("%s: Request Queue Overflow\n", isp->isp_name)); 1008 XS_SETERR(xs, HBA_BOTCH); 1009 return (CMD_EAGAIN); 1010 } 1011 if (isp->isp_type & ISP_HA_FC) { 1012 DISABLE_INTS(isp); 1013 } 1014 1015 if (isp->isp_sendmarker) { 1016 u_int8_t niptr; 1017 ispmarkreq_t *marker = (ispmarkreq_t *) reqp; 1018 1019 MEMZERO((void *) marker, sizeof (*marker)); 1020 marker->req_header.rqs_entry_count = 1; 1021 marker->req_header.rqs_entry_type = RQSTYPE_MARKER; 1022 marker->req_modifier = SYNC_ALL; 1023 1024 isp->isp_sendmarker = 0; 1025 1026 /* 1027 * Unconditionally update the input pointer anyway. 1028 */ 1029 ISP_WRITE(isp, INMAILBOX4, iptr); 1030 isp->isp_reqidx = iptr; 1031 1032 niptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1033 if (niptr == optr) { 1034 if (isp->isp_type & ISP_HA_FC) { 1035 ENABLE_INTS(isp); 1036 } 1037 IDPRINTF(2, ("%s: Request Queue Overflow+\n", 1038 isp->isp_name)); 1039 XS_SETERR(xs, HBA_BOTCH); 1040 return (CMD_EAGAIN); 1041 } 1042 reqp = (ispreq_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1043 iptr = niptr; 1044 } 1045 1046 MEMZERO((void *) reqp, UZSIZE); 1047 reqp->req_header.rqs_entry_count = 1; 1048 if (isp->isp_type & ISP_HA_FC) { 1049 reqp->req_header.rqs_entry_type = RQSTYPE_T2RQS; 1050 } else { 1051 reqp->req_header.rqs_entry_type = RQSTYPE_REQUEST; 1052 } 1053 reqp->req_header.rqs_flags = 0; 1054 reqp->req_header.rqs_seqno = isp->isp_seqno++; 1055 1056 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 1057 if (isp->isp_xflist[i] == NULL) 1058 break; 1059 } 1060 if (i == RQUEST_QUEUE_LEN) { 1061 if (isp->isp_type & ISP_HA_FC) 1062 ENABLE_INTS(isp); 1063 IDPRINTF(2, ("%s: out of xflist pointers\n", isp->isp_name)); 1064 XS_SETERR(xs, HBA_BOTCH); 1065 return (CMD_EAGAIN); 1066 } else { 1067 /* 1068 * Never have a handle that is zero, so 1069 * set req_handle off by one. 1070 */ 1071 isp->isp_xflist[i] = xs; 1072 reqp->req_handle = i+1; 1073 } 1074 1075 if (isp->isp_type & ISP_HA_FC) { 1076 /* 1077 * See comment in isp_intr 1078 */ 1079 XS_RESID(xs) = 0; 1080 /* 1081 * Fibre Channel always requires some kind of tag. 1082 * If we're marked as "Can't Tag", just do simple 1083 * instead of ordered tags. It's pretty clear to me 1084 * that we shouldn't do head of queue tagging in 1085 * this case. 1086 */ 1087 if (XS_CANTAG(xs)) { 1088 t2reqp->req_flags = XS_KINDOF_TAG(xs); 1089 } else { 1090 t2reqp->req_flags = REQFLAG_STAG; 1091 } 1092 } else { 1093 sdparam *sdp = (sdparam *)isp->isp_param; 1094 if ((sdp->isp_devparam[XS_TGT(xs)].cur_dflags & DPARM_TQING) && 1095 XS_CANTAG(xs)) { 1096 reqp->req_flags = XS_KINDOF_TAG(xs); 1097 } else { 1098 reqp->req_flags = 0; 1099 } 1100 } 1101 reqp->req_target = XS_TGT(xs); 1102 if (isp->isp_type & ISP_HA_SCSI) { 1103 reqp->req_lun_trn = XS_LUN(xs); 1104 reqp->req_cdblen = XS_CDBLEN(xs); 1105 } else { 1106 #ifdef SCCLUN 1107 reqp->req_scclun = XS_LUN(xs); 1108 #else 1109 reqp->req_lun_trn = XS_LUN(xs); 1110 #endif 1111 1112 } 1113 MEMCPY(reqp->req_cdb, XS_CDBP(xs), XS_CDBLEN(xs)); 1114 1115 IDPRINTF(5, ("%s(%d.%d): START%d cmd 0x%x datalen %d\n", isp->isp_name, 1116 XS_TGT(xs), XS_LUN(xs), reqp->req_header.rqs_seqno, 1117 reqp->req_cdb[0], XS_XFRLEN(xs))); 1118 1119 reqp->req_time = XS_TIME(xs) / 1000; 1120 if (reqp->req_time == 0 && XS_TIME(xs)) 1121 reqp->req_time = 1; 1122 i = ISP_DMASETUP(isp, xs, reqp, &iptr, optr); 1123 if (i != CMD_QUEUED) { 1124 if (isp->isp_type & ISP_HA_FC) 1125 ENABLE_INTS(isp); 1126 /* 1127 * dmasetup sets actual error in packet, and 1128 * return what we were given to return. 1129 */ 1130 return (i); 1131 } 1132 XS_SETERR(xs, HBA_NOERROR); 1133 ISP_WRITE(isp, INMAILBOX4, iptr); 1134 isp->isp_reqidx = iptr; 1135 if (isp->isp_type & ISP_HA_FC) { 1136 ENABLE_INTS(isp); 1137 } 1138 isp->isp_nactive++; 1139 return (CMD_QUEUED); 1140 #undef reqp 1141 #undef t2reqp 1142 } 1143 1144 /* 1145 * isp control 1146 * Locks (ints blocked) assumed held. 1147 */ 1148 1149 int 1150 isp_control(isp, ctl, arg) 1151 struct ispsoftc *isp; 1152 ispctl_t ctl; 1153 void *arg; 1154 { 1155 ISP_SCSI_XFER_T *xs; 1156 mbreg_t mbs; 1157 int i; 1158 1159 switch (ctl) { 1160 default: 1161 PRINTF("%s: isp_control unknown control op %x\n", 1162 isp->isp_name, ctl); 1163 break; 1164 1165 case ISPCTL_RESET_BUS: 1166 mbs.param[0] = MBOX_BUS_RESET; 1167 mbs.param[1] = (isp->isp_type & ISP_HA_FC)? 5: 2; 1168 isp_mboxcmd(isp, &mbs); 1169 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1170 isp_dumpregs(isp, "isp_control SCSI bus reset failed"); 1171 break; 1172 } 1173 /* 1174 * This is really important to have set after a bus reset. 1175 */ 1176 isp->isp_sendmarker = 1; 1177 PRINTF("%s: driver initiated bus reset\n", isp->isp_name); 1178 return (0); 1179 1180 case ISPCTL_RESET_DEV: 1181 /* 1182 * Note that under parallel SCSI, this issues a BDR message. 1183 * Under FC, we could probably be using ABORT TASK SET 1184 * command. 1185 */ 1186 1187 mbs.param[0] = MBOX_ABORT_TARGET; 1188 mbs.param[1] = ((long)arg) << 8; 1189 mbs.param[2] = 2; /* 'delay', in seconds */ 1190 isp_mboxcmd(isp, &mbs); 1191 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1192 isp_dumpregs(isp, "SCSI Target reset failed"); 1193 break; 1194 } 1195 PRINTF("%s: Target %d Reset Succeeded\n", isp->isp_name, 1196 (int) ((long) arg)); 1197 isp->isp_sendmarker = 1; 1198 return (0); 1199 1200 case ISPCTL_ABORT_CMD: 1201 xs = (ISP_SCSI_XFER_T *) arg; 1202 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 1203 if (xs == isp->isp_xflist[i]) { 1204 break; 1205 } 1206 } 1207 if (i == RQUEST_QUEUE_LEN) { 1208 PRINTF("%s: isp_control- cannot find command to abort " 1209 "in active list\n", isp->isp_name); 1210 break; 1211 } 1212 mbs.param[0] = MBOX_ABORT; 1213 #ifdef SCCLUN 1214 if (isp->isp_type & ISP_HA_FC) { 1215 mbs.param[1] = XS_TGT(xs) << 8; 1216 mbs.param[4] = 0; 1217 mbs.param[5] = 0; 1218 mbs.param[6] = XS_LUN(xs); 1219 } else { 1220 mbs.param[1] = XS_TGT(xs) << 8 | XS_LUN(xs); 1221 } 1222 #else 1223 mbs.param[1] = XS_TGT(xs) << 8 | XS_LUN(xs); 1224 #endif 1225 mbs.param[2] = (i+1) >> 16; 1226 mbs.param[3] = (i+1) & 0xffff; 1227 isp_mboxcmd(isp, &mbs); 1228 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 1229 PRINTF("%s: isp_control MBOX_ABORT failure (code %x)\n", 1230 isp->isp_name, mbs.param[0]); 1231 break; 1232 } 1233 PRINTF("%s: command for target %d lun %d was aborted\n", 1234 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 1235 return (0); 1236 1237 case ISPCTL_UPDATE_PARAMS: 1238 isp_update(isp); 1239 return(0); 1240 } 1241 return (-1); 1242 } 1243 1244 /* 1245 * Interrupt Service Routine(s). 1246 * 1247 * External (OS) framework has done the appropriate locking, 1248 * and the locking will be held throughout this function. 1249 */ 1250 1251 int 1252 isp_intr(arg) 1253 void *arg; 1254 { 1255 ISP_SCSI_XFER_T *complist[RESULT_QUEUE_LEN], *xs; 1256 struct ispsoftc *isp = arg; 1257 u_int8_t iptr, optr; 1258 u_int16_t isr; 1259 int i, ndone = 0; 1260 1261 isr = ISP_READ(isp, BIU_ISR); 1262 if (isp->isp_type & ISP_HA_FC) { 1263 if (isr == 0 || (isr & BIU2100_ISR_RISC_INT) == 0) { 1264 if (isr) { 1265 IDPRINTF(4, ("%s: isp_intr isr=%x\n", 1266 isp->isp_name, isr)); 1267 } 1268 return (0); 1269 } 1270 } else { 1271 if (isr == 0 || (isr & BIU_ISR_RISC_INT) == 0) { 1272 if (isr) { 1273 IDPRINTF(4, ("%s: isp_intr isr=%x\n", 1274 isp->isp_name, isr)); 1275 } 1276 return (0); 1277 } 1278 } 1279 1280 if (ISP_READ(isp, BIU_SEMA) & 1) { 1281 u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0); 1282 u_int32_t fast_post_handle = isp_parse_async(isp, (int) mbox); 1283 ISP_WRITE(isp, BIU_SEMA, 0); 1284 if (fast_post_handle < 0) { 1285 return (1); 1286 } else if (fast_post_handle > 0) { 1287 xs = (ISP_SCSI_XFER_T *) 1288 isp->isp_xflist[fast_post_handle - 1]; 1289 isp->isp_xflist[fast_post_handle - 1] = NULL; 1290 /* 1291 * Since we don't have a result queue entry item, 1292 * we must believe that SCSI status is zero and 1293 * that all data transferred. 1294 */ 1295 XS_RESID(xs) = 0; 1296 XS_STS(xs) = 0; 1297 if (XS_XFRLEN(xs)) { 1298 ISP_DMAFREE(isp, xs, fast_post_handle - 1); 1299 } 1300 if (isp->isp_nactive > 0) 1301 isp->isp_nactive--; 1302 complist[ndone++] = xs; 1303 } 1304 } 1305 1306 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 1307 1308 optr = isp->isp_residx; 1309 iptr = ISP_READ(isp, OUTMAILBOX5); 1310 1311 if (optr == iptr) { 1312 IDPRINTF(4, ("why intr? isr %x iptr %x optr %x\n", 1313 isr, optr, iptr)); 1314 } 1315 ENABLE_INTS(isp); 1316 1317 while (optr != iptr) { 1318 ispstatusreq_t *sp; 1319 u_int8_t oop; 1320 int buddaboom = 0; 1321 1322 sp = (ispstatusreq_t *) ISP_QUEUE_ENTRY(isp->isp_result, optr); 1323 oop = optr; 1324 optr = ISP_NXT_QENTRY(optr, RESULT_QUEUE_LEN); 1325 1326 if (sp->req_header.rqs_entry_type != RQSTYPE_RESPONSE) { 1327 if (isp_handle_other_response(isp, sp, &optr) == 0) { 1328 ISP_WRITE(isp, INMAILBOX5, optr); 1329 continue; 1330 } 1331 /* 1332 * It really has to be a bounced request just copied 1333 * from the request queue to the response queue. 1334 */ 1335 1336 if (sp->req_header.rqs_entry_type != RQSTYPE_REQUEST) { 1337 ISP_WRITE(isp, INMAILBOX5, optr); 1338 continue; 1339 } 1340 PRINTF("%s: not RESPONSE in RESPONSE Queue " 1341 "(type 0x%x) @ idx %d (next %d)\n", isp->isp_name, 1342 sp->req_header.rqs_entry_type, oop, optr); 1343 buddaboom = 1; 1344 } 1345 1346 if (sp->req_header.rqs_flags & 0xf) { 1347 if (sp->req_header.rqs_flags & RQSFLAG_CONTINUATION) { 1348 ISP_WRITE(isp, INMAILBOX5, optr); 1349 continue; 1350 } 1351 PRINTF("%s: rqs_flags=%x", isp->isp_name, 1352 sp->req_header.rqs_flags & 0xf); 1353 if (sp->req_header.rqs_flags & RQSFLAG_FULL) { 1354 PRINTF("%s: internal queues full\n", 1355 isp->isp_name); 1356 /* XXXX: this command *could* get restarted */ 1357 buddaboom++; 1358 } 1359 if (sp->req_header.rqs_flags & RQSFLAG_BADHEADER) { 1360 PRINTF("%s: bad header\n", isp->isp_name); 1361 buddaboom++; 1362 } 1363 if (sp->req_header.rqs_flags & RQSFLAG_BADPACKET) { 1364 PRINTF("%s: bad request packet\n", 1365 isp->isp_name); 1366 buddaboom++; 1367 } 1368 } 1369 if (sp->req_handle > RQUEST_QUEUE_LEN || sp->req_handle < 1) { 1370 PRINTF("%s: bad request handle %d\n", isp->isp_name, 1371 sp->req_handle); 1372 ISP_WRITE(isp, INMAILBOX5, optr); 1373 continue; 1374 } 1375 xs = (ISP_SCSI_XFER_T *) isp->isp_xflist[sp->req_handle - 1]; 1376 if (xs == NULL) { 1377 PRINTF("%s: NULL xs in xflist (handle %x)\n", 1378 isp->isp_name, sp->req_handle); 1379 isp_dumpxflist(isp); 1380 ISP_WRITE(isp, INMAILBOX5, optr); 1381 continue; 1382 } 1383 isp->isp_xflist[sp->req_handle - 1] = NULL; 1384 if (sp->req_status_flags & RQSTF_BUS_RESET) { 1385 isp->isp_sendmarker = 1; 1386 } 1387 if (buddaboom) { 1388 XS_SETERR(xs, HBA_BOTCH); 1389 } 1390 XS_STS(xs) = sp->req_scsi_status & 0xff; 1391 if (isp->isp_type & ISP_HA_SCSI) { 1392 if (sp->req_state_flags & RQSF_GOT_SENSE) { 1393 MEMCPY(XS_SNSP(xs), sp->req_sense_data, 1394 XS_SNSLEN(xs)); 1395 XS_SNS_IS_VALID(xs); 1396 } 1397 /* 1398 * A new synchronous rate was negotiated for this 1399 * target. Mark state such that we'll go look up 1400 * that which has changed later. 1401 */ 1402 if (sp->req_status_flags & RQSTF_NEGOTIATION) { 1403 sdparam *sdp = isp->isp_param; 1404 isp->isp_update = 1; 1405 sdp->isp_devparam[XS_TGT(xs)].dev_refresh = 1; 1406 } 1407 } else { 1408 if (XS_STS(xs) == SCSI_CHECK) { 1409 XS_SNS_IS_VALID(xs); 1410 MEMCPY(XS_SNSP(xs), sp->req_sense_data, 1411 XS_SNSLEN(xs)); 1412 sp->req_state_flags |= RQSF_GOT_SENSE; 1413 } 1414 } 1415 if (XS_NOERR(xs) && XS_STS(xs) == SCSI_BUSY) { 1416 XS_SETERR(xs, HBA_TGTBSY); 1417 } 1418 1419 if (sp->req_header.rqs_entry_type == RQSTYPE_RESPONSE) { 1420 if (XS_NOERR(xs)) { 1421 if (sp->req_completion_status != RQCS_COMPLETE) { 1422 isp_parse_status(isp, sp, xs); 1423 } else { 1424 XS_SETERR(xs, HBA_NOERROR); 1425 } 1426 } 1427 } else { 1428 PRINTF("%s: unknown return %x\n", isp->isp_name, 1429 sp->req_header.rqs_entry_type); 1430 if (XS_NOERR(xs)) { 1431 XS_SETERR(xs, HBA_BOTCH); 1432 } 1433 } 1434 if (isp->isp_type & ISP_HA_SCSI) { 1435 XS_RESID(xs) = sp->req_resid; 1436 } else if (sp->req_scsi_status & RQCS_RU) { 1437 XS_RESID(xs) = sp->req_resid; 1438 IDPRINTF(4, ("%s: cnt %d rsd %d\n", isp->isp_name, 1439 XS_XFRLEN(xs), sp->req_resid)); 1440 } 1441 if (XS_XFRLEN(xs)) { 1442 ISP_DMAFREE(isp, xs, sp->req_handle - 1); 1443 } 1444 /* 1445 * XXX: If we have a check condition, but no Sense Data, 1446 * XXX: mark it as an error (ARQ failed). We need to 1447 * XXX: to do a more distinct job because there may 1448 * XXX: cases where ARQ is disabled. 1449 */ 1450 if (XS_STS(xs) == SCSI_CHECK && !(XS_IS_SNS_VALID(xs))) { 1451 if (XS_NOERR(xs)) { 1452 PRINTF("%s: ARQ failure for target %d lun %d\n", 1453 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 1454 XS_SETERR(xs, HBA_ARQFAIL); 1455 } 1456 } 1457 if ((isp->isp_dblev >= 5) || 1458 (isp->isp_dblev > 2 && !XS_NOERR(xs))) { 1459 PRINTF("%s(%d.%d): FIN%d dl%d resid%d STS %x", 1460 isp->isp_name, XS_TGT(xs), XS_LUN(xs), 1461 sp->req_header.rqs_seqno, XS_XFRLEN(xs), 1462 XS_RESID(xs), XS_STS(xs)); 1463 if (sp->req_state_flags & RQSF_GOT_SENSE) { 1464 PRINTF(" Skey: %x", XS_SNSKEY(xs)); 1465 if (!(XS_IS_SNS_VALID(xs))) { 1466 PRINTF(" BUT NOT SET"); 1467 } 1468 } 1469 PRINTF(" XS_ERR=0x%x\n", (unsigned int) XS_ERR(xs)); 1470 } 1471 1472 ISP_WRITE(isp, INMAILBOX5, optr); 1473 if (isp->isp_nactive > 0) 1474 isp->isp_nactive--; 1475 complist[ndone++] = xs; /* defer completion call until later */ 1476 } 1477 /* 1478 * If we completed any commands, then it's valid to find out 1479 * what the outpointer is. 1480 */ 1481 if (ndone) { 1482 isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1483 } 1484 isp->isp_residx = optr; 1485 for (i = 0; i < ndone; i++) { 1486 xs = complist[i]; 1487 if (xs) { 1488 XS_CMD_DONE(xs); 1489 } 1490 } 1491 return (1); 1492 } 1493 1494 /* 1495 * Support routines. 1496 */ 1497 1498 static int 1499 isp_parse_async(isp, mbox) 1500 struct ispsoftc *isp; 1501 int mbox; 1502 { 1503 u_int32_t fast_post_handle = 0; 1504 1505 switch (mbox) { 1506 case ASYNC_BUS_RESET: 1507 PRINTF("%s: SCSI bus reset detected\n", isp->isp_name); 1508 isp->isp_sendmarker = 1; 1509 #ifdef ISP_TARGET_MODE 1510 isp_notify_ack(isp, NULL); 1511 #endif 1512 break; 1513 1514 case ASYNC_SYSTEM_ERROR: 1515 mbox = ISP_READ(isp, OUTMAILBOX1); 1516 PRINTF("%s: Internal FW Error @ RISC Addr 0x%x\n", 1517 isp->isp_name, mbox); 1518 isp_restart(isp); 1519 /* no point continuing after this */ 1520 return (-1); 1521 1522 case ASYNC_RQS_XFER_ERR: 1523 PRINTF("%s: Request Queue Transfer Error\n", isp->isp_name); 1524 break; 1525 1526 case ASYNC_RSP_XFER_ERR: 1527 PRINTF("%s: Response Queue Transfer Error\n", isp->isp_name); 1528 break; 1529 1530 case ASYNC_QWAKEUP: 1531 /* don't need to be chatty */ 1532 mbox = ISP_READ(isp, OUTMAILBOX4); 1533 break; 1534 1535 case ASYNC_TIMEOUT_RESET: 1536 PRINTF("%s: timeout initiated SCSI bus reset\n", isp->isp_name); 1537 isp->isp_sendmarker = 1; 1538 #ifdef ISP_TARGET_MODE 1539 isp_notify_ack(isp, NULL); 1540 #endif 1541 break; 1542 1543 case ASYNC_DEVICE_RESET: 1544 PRINTF("%s: device reset\n", isp->isp_name); 1545 #ifdef ISP_TARGET_MODE 1546 isp_notify_ack(isp, NULL); 1547 #endif 1548 break; 1549 1550 case ASYNC_EXTMSG_UNDERRUN: 1551 PRINTF("%s: extended message underrun\n", isp->isp_name); 1552 break; 1553 1554 case ASYNC_SCAM_INT: 1555 PRINTF("%s: SCAM interrupt\n", isp->isp_name); 1556 break; 1557 1558 case ASYNC_HUNG_SCSI: 1559 PRINTF("%s: stalled SCSI Bus after DATA Overrun\n", 1560 isp->isp_name); 1561 /* XXX: Need to issue SCSI reset at this point */ 1562 break; 1563 1564 case ASYNC_KILLED_BUS: 1565 PRINTF("%s: SCSI Bus reset after DATA Overrun\n", 1566 isp->isp_name); 1567 break; 1568 1569 case ASYNC_BUS_TRANSIT: 1570 PRINTF("%s: LBD->HVD Transition 0x%x\n", 1571 isp->isp_name, ISP_READ(isp, OUTMAILBOX1)); 1572 break; 1573 1574 case ASYNC_CMD_CMPLT: 1575 fast_post_handle = (ISP_READ(isp, OUTMAILBOX2) << 16) | 1576 ISP_READ(isp, OUTMAILBOX1); 1577 IDPRINTF(3, ("%s: fast post completion of %u\n", isp->isp_name, 1578 fast_post_handle)); 1579 break; 1580 1581 case ASYNC_CTIO_DONE: 1582 /* Should only occur when Fast Posting Set for 2100s */ 1583 PRINTF("%s: CTIO done\n", isp->isp_name); 1584 break; 1585 1586 case ASYNC_LIP_OCCURRED: 1587 PRINTF("%s: LIP occurred\n", isp->isp_name); 1588 break; 1589 1590 case ASYNC_LOOP_UP: 1591 PRINTF("%s: Loop UP\n", isp->isp_name); 1592 break; 1593 1594 case ASYNC_LOOP_DOWN: 1595 PRINTF("%s: Loop DOWN\n", isp->isp_name); 1596 break; 1597 1598 case ASYNC_LOOP_RESET: 1599 PRINTF("%s: Loop RESET\n", isp->isp_name); 1600 #ifdef ISP_TARGET_MODE 1601 isp_notify_ack(isp, NULL); 1602 #endif 1603 break; 1604 1605 case ASYNC_PDB_CHANGED: 1606 PRINTF("%s: Port Database Changed\n", isp->isp_name); 1607 break; 1608 1609 case ASYNC_CHANGE_NOTIFY: 1610 PRINTF("%s: Name Server Database Changed\n", isp->isp_name); 1611 break; 1612 1613 default: 1614 PRINTF("%s: async %x\n", isp->isp_name, mbox); 1615 break; 1616 } 1617 return (fast_post_handle); 1618 } 1619 1620 static int 1621 isp_handle_other_response(isp, sp, optrp) 1622 struct ispsoftc *isp; 1623 ispstatusreq_t *sp; 1624 u_int8_t *optrp; 1625 { 1626 u_int8_t iptr, optr; 1627 int reqsize = 0; 1628 void *ireqp = NULL; 1629 #ifdef ISP_TARGET_MODE 1630 union { 1631 at_entry_t *atio; 1632 at2_entry_t *at2io; 1633 ct_entry_t *ctio; 1634 ct2_entry_t *ct2io; 1635 lun_entry_t *lunen; 1636 in_entry_t *inot; 1637 in_fcentry_t *inot_fc; 1638 na_entry_t *nack; 1639 na_fcentry_t *nack_fc; 1640 void *voidp; 1641 #define atio un.atio 1642 #define at2io un.at2io 1643 #define ctio un.ctio 1644 #define ct2io un.ct2io 1645 #define lunen un.lunen 1646 #define inot un.inot 1647 #define inot_fc un.inot_fc 1648 #define nack un.nack 1649 #define nack_fc un.nack_fc 1650 } un; 1651 1652 un.voidp = sp; 1653 #endif 1654 1655 1656 switch (sp->req_header.rqs_entry_type) { 1657 case RQSTYPE_REQUEST: 1658 return (-1); 1659 #ifdef ISP_TARGET_MODE 1660 case RQSTYPE_NOTIFY_ACK: 1661 { 1662 static const char *f = 1663 "%s: Notify Ack Status 0x%x Sequence Id 0x%x\n" 1664 /* 1665 * The ISP is acknowleding our ack of an Immediate Notify. 1666 */ 1667 if (isp->isp_type & ISP_HA_FC) { 1668 PRINTF(f, isp->isp_name, 1669 nack_fc->na-status, nack_fc->na_seqid); 1670 } else { 1671 PRINTF(f, isp->isp_name, 1672 nack->na_status, nack->na_seqid); 1673 } 1674 break; 1675 } 1676 case RQSTYPE_NOTIFY: 1677 { 1678 u_int16_t seqid, status; 1679 1680 /* 1681 * Either the ISP received a SCSI message it cannot handle 1682 * or some other out of band condition (e.g., Port Logout) 1683 * or it is returning an Immediate Notify entry we sent. 1684 */ 1685 if (isp->isp_type & ISP_HA_FC) { 1686 status = inot_fc->status; 1687 seqid = inot_fc->in_seqid; 1688 } else { 1689 status = inot->status; 1690 seqid = inot->seqid & 0xff; 1691 } 1692 PRINTF("%s: Immediate Notify Status 0x%x Sequence Id 0x%x\n", 1693 isp->isp_name, status, seqid); 1694 1695 switch (status) { 1696 case IN_MSG_RECEIVED: 1697 case IN_IDE_RECEIVED: 1698 ptisp_got_msg(ptp, &inot); 1699 break; 1700 case IN_RSRC_UNAVAIL: 1701 PRINTF("%s: Firmware out of ATIOs\n", isp->isp_name); 1702 break; 1703 case IN_ABORT_TASK: 1704 PRINTF("%s: Abort Task iid %d rx_id 0x%x\n", 1705 inot_fc->in_iid, seqid); 1706 break; 1707 case IN_PORT_LOGOUT: 1708 PRINTF("%s: Port Logout for Initiator %d\n", 1709 isp->isp_name, inot_fc->in_iid); 1710 break; 1711 default: 1712 PRINTF("%s: bad status (0x%x) in Immediate Notify\n", 1713 isp->isp_name, status); 1714 break; 1715 1716 } 1717 isp_notify_ack(isp, un.voidp); 1718 reqsize = 0; 1719 break; 1720 } 1721 case RQSTYPE_ENABLE_LUN: 1722 case RQSTYPE_MODIFY_LUN: 1723 if (lunen->req_status != 1) { 1724 PRINTF("%s: ENABLE/MODIFY LUN returned status 0x%x\n", 1725 isp->isp_name, lunen->req_status); 1726 } 1727 break; 1728 case RQSTYPE_ATIO2: 1729 { 1730 fcparam *fcp = isp->isp_param; 1731 ispctiot2_t local, *ct2 = NULL; 1732 ispatiot2_t *at2 = (ispatiot2_t *) sp; 1733 int s, lun; 1734 1735 #ifdef SCCLUN 1736 lun = at2->req_scclun; 1737 #else 1738 lun = at2->req_lun; 1739 #endif 1740 PRINTF("%s: atio2 loopid %d for lun %d rxid 0x%x flags0x%x " 1741 "tflags0x%x ecodes0x%x rqstatus0x%x\n", isp->isp_name, 1742 at2->req_initiator, lun, at2->req_rxid, 1743 at2->req_flags, at2->req_taskflags, at2->req_execodes, 1744 at2->req_status); 1745 1746 switch (at2->req_status & ~ATIO_SENSEVALID) { 1747 case ATIO_PATH_INVALID: 1748 PRINTF("%s: ATIO2 Path Invalid\n", isp->isp_name); 1749 break; 1750 case ATIO_NOCAP: 1751 PRINTF("%s: ATIO2 No Cap\n", isp->isp_name); 1752 break; 1753 case ATIO_BDR_MSG: 1754 PRINTF("%s: ATIO2 BDR Received\n", isp->isp_name); 1755 break; 1756 case ATIO_CDB_RECEIVED: 1757 ct2 = &local; 1758 break; 1759 default: 1760 PRINTF("%s: unknown req_status 0x%x\n", isp->isp_name, 1761 at2->req_status); 1762 break; 1763 } 1764 if (ct2 == NULL) { 1765 /* 1766 * Just do an ACCEPT on this fellow. 1767 */ 1768 at2->req_header.rqs_entry_type = RQSTYPE_ATIO2; 1769 at2->req_header.rqs_flags = 0; 1770 at2->req_flags = 1; 1771 ireqp = at2; 1772 reqsize = sizeof (*at2); 1773 break; 1774 } 1775 PRINTF("%s: datalen %d cdb0=0x%x\n", isp->isp_name, 1776 at2->req_datalen, at2->req_cdb[0]); 1777 MEMZERO((void *) ct2, sizeof (*ct2)); 1778 ct2->req_header.rqs_entry_type = RQSTYPE_CTIO2; 1779 ct2->req_header.rqs_entry_count = 1; 1780 ct2->req_header.rqs_flags = 0; 1781 ct2->req_header.rqs_seqno = isp->isp_seqno++; 1782 ct2->req_handle = (at2->req_initiator << 16) | lun; 1783 #ifndef SCCLUN 1784 ct2->req_lun = lun; 1785 #endif 1786 ct2->req_initiator = at2->req_initiator; 1787 ct2->req_rxid = at2->req_rxid; 1788 1789 ct2->req_flags = CTIO_SEND_STATUS; 1790 switch (at2->req_cdb[0]) { 1791 case 0x0: /* TUR */ 1792 ct2->req_flags |= CTIO_NODATA | CTIO2_SMODE0; 1793 ct2->req_m.mode0.req_scsi_status = CTIO2_STATUS_VALID; 1794 break; 1795 1796 case 0x3: /* REQUEST SENSE */ 1797 case 0x12: /* INQUIRE */ 1798 ct2->req_flags |= CTIO_SEND_DATA | CTIO2_SMODE0; 1799 ct2->req_m.mode0.req_scsi_status = CTIO2_STATUS_VALID; 1800 ct2->req_seg_count = 1; 1801 if (at2->req_cdb[0] == 0x12) { 1802 s = sizeof(tgtiqd); 1803 MEMCPY(fcp->isp_scratch, tgtiqd, s); 1804 } else { 1805 s = at2->req_datalen; 1806 MEMZERO(fcp->isp_scratch, s); 1807 } 1808 ct2->req_m.mode0.req_dataseg[0].ds_base = 1809 fcp->isp_scdma; 1810 ct2->req_m.mode0.req_dataseg[0].ds_count = s; 1811 ct2->req_m.mode0.req_datalen = s; 1812 #if 1 1813 if (at2->req_datalen < s) { 1814 ct2->req_m.mode1.req_scsi_status |= 1815 CTIO2_RESP_VALID|CTIO2_RSPOVERUN; 1816 } else if (at2->req_datalen > s) { 1817 ct2->req_m.mode1.req_scsi_status |= 1818 CTIO2_RESP_VALID|CTIO2_RSPUNDERUN; 1819 } 1820 #endif 1821 break; 1822 1823 default: /* ALL OTHERS */ 1824 ct2->req_flags |= CTIO_NODATA | CTIO2_SMODE1; 1825 ct2->req_m.mode1.req_scsi_status = 0; 1826 #if 1 1827 if (at2->req_datalen) { 1828 ct2->req_m.mode1.req_scsi_status |= 1829 CTIO2_RSPUNDERUN; 1830 #if BYTE_ORDER == BIG_ENDIAN 1831 ct2->req_resid[1] = at2->req_datalen & 0xff; 1832 ct2->req_resid[0] = 1833 (at2->req_datalen >> 8) & 0xff; 1834 ct2->req_resid[3] = 1835 (at2->req_datalen >> 16) & 0xff; 1836 ct2->req_resid[2] = 1837 (at2->req_datalen >> 24) & 0xff; 1838 #else 1839 ct2->req_resid[0] = at2->req_datalen & 0xff; 1840 ct2->req_resid[1] = 1841 (at2->req_datalen >> 8) & 0xff; 1842 ct2->req_resid[2] = 1843 (at2->req_datalen >> 16) & 0xff; 1844 ct2->req_resid[3] = 1845 (at2->req_datalen >> 24) & 0xff; 1846 #endif 1847 } 1848 #endif 1849 if ((at2->req_status & ATIO_SENSEVALID) == 0) { 1850 ct2->req_m.mode1.req_sense_len = 18; 1851 ct2->req_m.mode1.req_scsi_status |= 2; 1852 ct2->req_m.mode1.req_response[0] = 0x70; 1853 ct2->req_m.mode1.req_response[2] = 0x2; 1854 } else { 1855 ct2->req_m.mode1.req_sense_len = 18; 1856 ct2->req_m.mode1.req_scsi_status |= 1857 at2->req_scsi_status; 1858 MEMCPY(ct2->req_m.mode1.req_response, 1859 at2->req_sense, sizeof (at2->req_sense)); 1860 } 1861 break; 1862 } 1863 reqsize = sizeof (*ct2); 1864 ireqp = ct2; 1865 break; 1866 } 1867 case RQSTYPE_CTIO2: 1868 { 1869 ispatiot2_t *at2; 1870 ispctiot2_t *ct2 = (ispctiot2_t *) sp; 1871 PRINTF("%s: CTIO2 returned status 0x%x\n", isp->isp_name, 1872 ct2->req_status); 1873 /* 1874 * Return the ATIO to the board. 1875 */ 1876 at2 = (ispatiot2_t *) sp; 1877 at2->req_header.rqs_entry_type = RQSTYPE_ATIO2; 1878 at2->req_header.rqs_entry_count = 1; 1879 at2->req_header.rqs_flags = 0; 1880 at2->req_header.rqs_seqno = isp->isp_seqno++; 1881 at2->req_status = 1; 1882 reqsize = sizeof (*at2); 1883 ireqp = at2; 1884 break; 1885 } 1886 #undef atio 1887 #undef at2io 1888 #undef ctio 1889 #undef ct2io 1890 #undef lunen 1891 #undef inot 1892 #undef inot_fc 1893 #undef nack 1894 #undef nack_fc 1895 #endif 1896 default: 1897 PRINTF("%s: other response type %x\n", isp->isp_name, 1898 sp->req_header.rqs_entry_type); 1899 break; 1900 } 1901 if (reqsize) { 1902 void *reqp; 1903 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1904 iptr = isp->isp_reqidx; 1905 reqp = (void *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1906 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1907 if (iptr == optr) { 1908 PRINTF("%s: Request Queue Overflow other response\n", 1909 isp->isp_name); 1910 } else { 1911 MEMCPY(reqp, ireqp, reqsize); 1912 ISP_WRITE(isp, INMAILBOX4, iptr); 1913 isp->isp_reqidx = iptr; 1914 } 1915 } 1916 return (0); 1917 } 1918 1919 #ifdef ISP_TARGET_MODE 1920 1921 static void isp_tmd_newcmd_dflt __P((void *, tmd_cmd_t *)); 1922 static void isp_tmd_event_dflt __P((void *, int)); 1923 static void isp_tmd_notify_dflt __P((void *, tmd_notify_t *)); 1924 1925 static void isp_tgt_data_xfer __P ((tmd_cmd_t *)); 1926 static void isp_tgt_endcmd __P ((tmd_cmd_t *, u_int8_t)); 1927 static void isp_tgt_done __P ((tmd_cmd_t *)); 1928 1929 static void 1930 isp_tmd_newcmd_dflt(arg0, cmdp) 1931 void *arg0; 1932 tmd_cmd_t *cmdp; 1933 { 1934 } 1935 1936 static void 1937 isp_tmd_event_dflt(arg0, event) 1938 void *arg0; 1939 int event; 1940 { 1941 } 1942 1943 static void 1944 isp_tmd_notify_dflt(arg0, npt) 1945 void *arg0; 1946 tmd_notify_t *npt; 1947 { 1948 } 1949 1950 /* 1951 * Locks held, and ints disabled (if FC). 1952 * 1953 * XXX: SETUP ONLY FOR INITIAL ENABLING RIGHT NOW 1954 */ 1955 static int 1956 isp_modify_lun(isp, lun, icnt, ccnt) 1957 struct ispsoftc *isp; 1958 int lun; /* logical unit to enable, modify, or disable */ 1959 int icnt; /* immediate notify count */ 1960 int ccnt; /* command count */ 1961 { 1962 isplun_t *ip = NULL; 1963 u_int8_t iptr, optr; 1964 1965 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 1966 iptr = isp->isp_reqidx; 1967 ip = (isplun_t *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 1968 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 1969 if (iptr == optr) { 1970 PRINTF("%s: Request Queue Overflow in isp_modify_lun\n", 1971 isp->isp_name); 1972 return (-1); 1973 } 1974 1975 MEMZERO((void *) ip, sizeof (*ip)); 1976 ip->req_header.rqs_entry_type = RQSTYPE_ENABLE_LUN; 1977 ip->req_header.rqs_entry_count = 1; 1978 ip->req_header.rqs_seqno = isp->isp_seqno++; 1979 ip->req_handle = RQSTYPE_ENABLE_LUN; 1980 if (isp->isp_type & ISP_HA_SCSI) { 1981 ip->req_lun = lun; 1982 } 1983 ip->req_cmdcount = ccnt; 1984 ip->req_imcount = icnt; 1985 ip->req_timeout = 0; /* default 30 seconds */ 1986 ISP_WRITE(isp, INMAILBOX4, iptr); 1987 isp->isp_reqidx = iptr; 1988 return (0); 1989 } 1990 1991 static void 1992 isp_notify_ack(isp, ptrp) 1993 struct ispsoftc *isp; 1994 void *ptrp; 1995 { 1996 void *reqp; 1997 u_int8_t iptr, optr; 1998 union { 1999 na_fcentry_t _naf; 2000 na_entry_t _nas; 2001 } un; 2002 2003 MEMZERO((caddr_t)&un, sizeof (un)); 2004 un._nas.na_header.rqs_entry_type = RQSTYPE_NOTIFY_ACK; 2005 un._nas.na_header.rqs_entry_count = 1; 2006 2007 if (isp->isp_type & ISP_HA_FC) { 2008 na_fcentry_t *na = &un._nas; 2009 if (ptrp) { 2010 in_fcentry_t *inp = ptrp; 2011 na->na_iid = inp->in_iid; 2012 na->na_lun = inp->in_lun; 2013 na->na_task_flags = inp->in_task_flags; 2014 na->na_seqid = inp->in_seqid; 2015 na->na_status = inp->in_status; 2016 } else { 2017 na->na_flags = NAFC_RST_CLRD; 2018 } 2019 } else { 2020 na_entry_t *na = &un._nas; 2021 if (ptrp) { 2022 in_entry_t *inp = ptrp; 2023 na->na_iid = inp->in_iid; 2024 na->na_lun = inp->in_lun; 2025 na->na_tgt = inp->in_tgt; 2026 na->na_seqid = inp->in_seqid; 2027 } else { 2028 na->na_flags = NA_RST_CLRD; 2029 } 2030 } 2031 optr = isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4); 2032 iptr = isp->isp_reqidx; 2033 reqp = (void *) ISP_QUEUE_ENTRY(isp->isp_rquest, iptr); 2034 iptr = ISP_NXT_QENTRY(iptr, RQUEST_QUEUE_LEN); 2035 if (iptr == optr) { 2036 PRINTF("%s: Request Queue Overflow For isp_notify_ack\n", 2037 isp->isp_name); 2038 } else { 2039 MEMCPY(reqp, ireqp, sizeof (un)); 2040 ISP_WRITE(isp, INMAILBOX4, iptr); 2041 isp->isp_reqidx = iptr; 2042 } 2043 } 2044 2045 /* 2046 * These are dummy stubs for now until the outside framework is plugged in. 2047 */ 2048 2049 static void 2050 isp_handle_atio (isp, aep) 2051 struct ispsoftc *isp; 2052 at_entry_t *aep; 2053 { 2054 int status, connected; 2055 tmd_cmd_t local, *cdp = &local; 2056 2057 /* 2058 * Get the ATIO status and see if we're still connected. 2059 */ 2060 status = aep->at_status; 2061 connected = ((aep->at_flags & AT_NODISC) != 0); 2062 2063 PRINTF("%s: ATIO status=0x%x, connected=%d\n", isp->isp_name, 2064 status, connected); 2065 2066 /* 2067 * The firmware status (except for the SenseValid bit) indicates 2068 * why this ATIO was sent to us. 2069 * If SenseValid is set, the firware has recommended Sense Data. 2070 * If the Disconnects Disabled bit is set in the flags field, 2071 * we're still connected on the SCSI bus - i.e. the initiator 2072 * did not set DiscPriv in the identify message. We don't care 2073 * about this so it's ignored. 2074 */ 2075 switch(status & ~TGTSVALID) { 2076 case AT_PATH_INVALID: 2077 /* 2078 * ATIO rejected by the firmware due to disabled lun. 2079 */ 2080 PRINTF("%s: Firmware rejected ATIO for disabled lun %d\n", 2081 isp->isp_name, aep->at_lun); 2082 break; 2083 2084 case AT_PHASE_ERROR: 2085 /* 2086 * Bus Pase Sequence error. 2087 * 2088 * The firmware should have filled in the correct 2089 * sense data. 2090 */ 2091 2092 2093 if (status & TGTSVALID) { 2094 MEMCPY(&cdp->cd_sensedata, aep->at_sense, 2095 sizeof (cdp->cd_sensedata)); 2096 PRINTF("%s: Bus Phase Sequence error key 0x%x\n", 2097 isp->isp_name, cdp->cd_sensedata[2] & 0xf); 2098 } else { 2099 PRINTF("%s: Bus Phase Sequence With No Sense\n", 2100 isp->isp_name); 2101 } 2102 (*isp->isp_tmd_newcmd)(isp, cdp); 2103 break; 2104 2105 case AT_NOCAP: 2106 /* 2107 * Requested Capability not available 2108 * We sent an ATIO that overflowed the firmware's 2109 * command resource count. 2110 */ 2111 PRINTF("%s: Firmware rejected ATIO, command count overflow\n", 2112 isp->isp_name); 2113 break; 2114 2115 case AT_BDR_MSG: 2116 /* 2117 * If we send an ATIO to the firmware to increment 2118 * its command resource count, and the firmware is 2119 * recovering from a Bus Device Reset, it returns 2120 * the ATIO with this status. 2121 */ 2122 PRINTF("%s: ATIO returned with BDR received\n", isp->isp_name); 2123 break; 2124 2125 case AT_CDB: 2126 /* 2127 * New CDB 2128 */ 2129 cdp->cd_hba = isp; 2130 cdp->cd_iid = aep->at_iid; 2131 cdp->cd_tgt = aep->at_tgt; 2132 cdp->cd_lun = aep->at_lun; 2133 cdp->cd_tagtype = aep->at_tag_type; 2134 cdp->cd_tagval = aep->at_tag_val; 2135 MEMCPY(cdp->cd_cdb, aep->at_cdb, 16); 2136 PRINTF("%s: CDB 0x%x itl %d/%d/%d\n", isp->isp_name, 2137 cdp->cd_cdb[0], cdp->cd_iid, cdp->cd_tgt, cdp->cd_lun); 2138 (*isp->isp_tmd_newcmd)(isp, cdp); 2139 break; 2140 2141 default: 2142 PRINTF("%s: Unknown status (0x%x) in ATIO\n", 2143 isp->isp_name, status); 2144 cdp->cd_hba = isp; 2145 cdp->cd_iid = aep->at_iid; 2146 cdp->cd_tgt = aep->at_tgt; 2147 cdp->cd_lun = aep->at_lun; 2148 cdp->cd_tagtype = aep->at_tag_type; 2149 cdp->cd_tagval = aep->at_tag_val; 2150 isp_tgtcmd_done(cdp); 2151 break; 2152 } 2153 } 2154 2155 static void 2156 isp_handle_atio2(isp, aep) 2157 struct ispsoftc *isp; 2158 at2_entry_t *aep; 2159 { 2160 int status; 2161 tmd_cmd_t local, *cdp = &local; 2162 2163 /* 2164 * Get the ATIO2 status. 2165 */ 2166 status = aep->at_status; 2167 PRINTD("%s: ATIO2 status=0x%x\n", status); 2168 2169 /* 2170 * The firmware status (except for the SenseValid bit) indicates 2171 * why this ATIO was sent to us. 2172 * If SenseValid is set, the firware has recommended Sense Data. 2173 */ 2174 switch(status & ~TGTSVALID) { 2175 case AT_PATH_INVALID: 2176 /* 2177 * ATIO rejected by the firmware due to disabled lun. 2178 */ 2179 PRINTF("%s: Firmware rejected ATIO2 for disabled lun %d\n", 2180 isp->isp_name, aep->at_lun); 2181 break; 2182 2183 case AT_NOCAP: 2184 /* 2185 * Requested Capability not available 2186 * We sent an ATIO that overflowed the firmware's 2187 * command resource count. 2188 */ 2189 PRINTF("%s: Firmware rejected ATIO2, command count overflow\n", 2190 isp->isp_name); 2191 break; 2192 2193 case AT_BDR_MSG: 2194 /* 2195 * If we send an ATIO to the firmware to increment 2196 * its command resource count, and the firmware is 2197 * recovering from a Bus Device Reset, it returns 2198 * the ATIO with this status. 2199 */ 2200 PRINTF("%s: ATIO2 returned with BDR rcvd\n", isp->isp_name); 2201 break; 2202 2203 case AT_CDB: 2204 /* 2205 * New CDB 2206 */ 2207 cdp->cd_hba = isp; 2208 cdp->cd_iid = aep->at_iid; 2209 cdp->cd_tgt = 0; 2210 cdp->cd_lun = aep->at_lun; 2211 MEMCPY(cdp->cd_cdb, aep->at_cdb, 16); 2212 cdp->cd_rxid = aep->at_rxid; 2213 cdp->cp_origdlen = aep->at_datalen; 2214 cdp->cp_totbytes = 0; 2215 PRINTF("%s: CDB 0x%x rx_id 0x%x itl %d/%d/%d dlen %d\n", 2216 isp->isp_name, cdp->cd_cdb[0], cdp->cd_tagval, cdp->cd_iid, 2217 cdp->cd_tgt, cdp->cd_lun, aep->at_datalen); 2218 (*isp->isp_tmd_newcmd)(isp, cdp); 2219 break; 2220 2221 default: 2222 PRINTF("%s: Unknown status (0x%x) in ATIO2\n", 2223 isp->isp_name, status); 2224 cdp->cd_hba = isp; 2225 cdp->cd_iid = aep->at_iid; 2226 cdp->cd_tgt = aep->at_tgt; 2227 cdp->cd_lun = aep->at_lun; 2228 cdp->cp_rxid = aep->at_rxid; 2229 isp_tgtcmd_done(cdp); 2230 break; 2231 } 2232 } 2233 2234 static void 2235 isp_handle_ctio(isp, cep) 2236 struct ispsoftc *isp; 2237 ct_entry_t *aep; 2238 { 2239 } 2240 2241 static void 2242 isp_handle_ctio2(isp, cep) 2243 struct ispsoftc *isp; 2244 at2_entry_t *aep; 2245 { 2246 } 2247 #endif 2248 2249 static void 2250 isp_parse_status(isp, sp, xs) 2251 struct ispsoftc *isp; 2252 ispstatusreq_t *sp; 2253 ISP_SCSI_XFER_T *xs; 2254 { 2255 switch (sp->req_completion_status) { 2256 case RQCS_COMPLETE: 2257 XS_SETERR(xs, HBA_NOERROR); 2258 return; 2259 2260 case RQCS_INCOMPLETE: 2261 if ((sp->req_state_flags & RQSF_GOT_TARGET) == 0) { 2262 IDPRINTF(3, ("%s: Selection Timeout for target %d\n", 2263 isp->isp_name, XS_TGT(xs))); 2264 XS_SETERR(xs, HBA_SELTIMEOUT); 2265 return; 2266 } 2267 PRINTF("%s: command incomplete for target %d lun %d, state " 2268 "0x%x\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs), 2269 sp->req_state_flags); 2270 break; 2271 2272 case RQCS_DMA_ERROR: 2273 PRINTF("%s: DMA error for command on target %d, lun %d\n", 2274 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2275 break; 2276 2277 case RQCS_TRANSPORT_ERROR: 2278 PRINTF("%s: transport error\n", isp->isp_name); 2279 isp_prtstst(sp); 2280 break; 2281 2282 case RQCS_RESET_OCCURRED: 2283 IDPRINTF(2, ("%s: bus reset destroyed command for target %d " 2284 "lun %d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs))); 2285 isp->isp_sendmarker = 1; 2286 XS_SETERR(xs, HBA_BUSRESET); 2287 return; 2288 2289 case RQCS_ABORTED: 2290 PRINTF("%s: command aborted for target %d lun %d\n", 2291 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2292 isp->isp_sendmarker = 1; 2293 XS_SETERR(xs, HBA_ABORTED); 2294 return; 2295 2296 case RQCS_TIMEOUT: 2297 IDPRINTF(2, ("%s: command timed out for target %d lun %d\n", 2298 isp->isp_name, XS_TGT(xs), XS_LUN(xs))); 2299 XS_SETERR(xs, HBA_CMDTIMEOUT); 2300 return; 2301 2302 case RQCS_DATA_OVERRUN: 2303 if (isp->isp_type & ISP_HA_FC) { 2304 XS_RESID(xs) = sp->req_resid; 2305 break; 2306 } 2307 XS_SETERR(xs, HBA_DATAOVR); 2308 return; 2309 2310 case RQCS_COMMAND_OVERRUN: 2311 PRINTF("%s: command overrun for command on target %d, lun %d\n", 2312 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2313 break; 2314 2315 case RQCS_STATUS_OVERRUN: 2316 PRINTF("%s: status overrun for command on target %d, lun %d\n", 2317 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2318 break; 2319 2320 case RQCS_BAD_MESSAGE: 2321 PRINTF("%s: message not COMMAND COMPLETE after status on " 2322 "target %d, lun %d\n", isp->isp_name, XS_TGT(xs), 2323 XS_LUN(xs)); 2324 break; 2325 2326 case RQCS_NO_MESSAGE_OUT: 2327 PRINTF("%s: No MESSAGE OUT phase after selection on " 2328 "target %d, lun %d\n", isp->isp_name, XS_TGT(xs), 2329 XS_LUN(xs)); 2330 break; 2331 2332 case RQCS_EXT_ID_FAILED: 2333 PRINTF("%s: EXTENDED IDENTIFY failed on target %d, lun %d\n", 2334 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2335 break; 2336 2337 case RQCS_IDE_MSG_FAILED: 2338 PRINTF("%s: target %d lun %d rejected INITIATOR DETECTED " 2339 "ERROR message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2340 break; 2341 2342 case RQCS_ABORT_MSG_FAILED: 2343 PRINTF("%s: target %d lun %d rejected ABORT message\n", 2344 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2345 break; 2346 2347 case RQCS_REJECT_MSG_FAILED: 2348 PRINTF("%s: target %d lun %d rejected MESSAGE REJECT message\n", 2349 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2350 break; 2351 2352 case RQCS_NOP_MSG_FAILED: 2353 PRINTF("%s: target %d lun %d rejected NOP message\n", 2354 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2355 break; 2356 2357 case RQCS_PARITY_ERROR_MSG_FAILED: 2358 PRINTF("%s: target %d lun %d rejected MESSAGE PARITY ERROR " 2359 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2360 break; 2361 2362 case RQCS_DEVICE_RESET_MSG_FAILED: 2363 PRINTF("%s: target %d lun %d rejected BUS DEVICE RESET " 2364 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2365 break; 2366 2367 case RQCS_ID_MSG_FAILED: 2368 PRINTF("%s: target %d lun %d rejected IDENTIFY " 2369 "message\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2370 break; 2371 2372 case RQCS_UNEXP_BUS_FREE: 2373 PRINTF("%s: target %d lun %d had an unexpected bus free\n", 2374 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2375 break; 2376 2377 case RQCS_DATA_UNDERRUN: 2378 if (isp->isp_type & ISP_HA_FC) { 2379 XS_RESID(xs) = sp->req_resid; 2380 /* an UNDERRUN is not a botch ??? */ 2381 } 2382 XS_SETERR(xs, HBA_NOERROR); 2383 return; 2384 2385 case RQCS_XACT_ERR1: 2386 PRINTF("%s: HBA attempted queued transaction with disconnect " 2387 "not set for target %d lun %d\n", isp->isp_name, XS_TGT(xs), 2388 XS_LUN(xs)); 2389 break; 2390 2391 case RQCS_XACT_ERR2: 2392 PRINTF("%s: HBA attempted queued transaction to target " 2393 "routine %d on target %d\n", isp->isp_name, XS_LUN(xs), 2394 XS_TGT(xs)); 2395 break; 2396 2397 case RQCS_XACT_ERR3: 2398 PRINTF("%s: HBA attempted queued transaction for target %d lun " 2399 "%d when queueing disabled\n", isp->isp_name, XS_TGT(xs), 2400 XS_LUN(xs)); 2401 break; 2402 2403 case RQCS_BAD_ENTRY: 2404 PRINTF("%s: invalid IOCB entry type detected\n", isp->isp_name); 2405 break; 2406 2407 case RQCS_QUEUE_FULL: 2408 PRINTF("%s: internal queues full for target %d lun %d " 2409 "status 0x%x\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs), 2410 XS_STS(xs)); 2411 /* 2412 * If QFULL or some other status byte is set, then this 2413 * isn't an error, per se. 2414 */ 2415 if (XS_STS(xs) != 0) { 2416 XS_SETERR(xs, HBA_NOERROR); 2417 return; 2418 } 2419 break; 2420 2421 case RQCS_PHASE_SKIPPED: 2422 PRINTF("%s: SCSI phase skipped (e.g., COMMAND COMPLETE w/o " 2423 "STATUS phase) for target %d lun %d\n", isp->isp_name, 2424 XS_TGT(xs), XS_LUN(xs)); 2425 break; 2426 2427 case RQCS_ARQS_FAILED: 2428 PRINTF("%s: Auto Request Sense failed for target %d lun %d\n", 2429 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2430 XS_SETERR(xs, HBA_ARQFAIL); 2431 return; 2432 2433 case RQCS_WIDE_FAILED: 2434 PRINTF("%s: Wide Negotiation failed for target %d lun %d\n", 2435 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2436 if (isp->isp_type & ISP_HA_SCSI) { 2437 sdparam *sdp = isp->isp_param; 2438 isp->isp_update = 1; 2439 sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_WIDE; 2440 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 2441 } 2442 XS_SETERR(xs, HBA_NOERROR); 2443 return; 2444 2445 case RQCS_SYNCXFER_FAILED: 2446 PRINTF("%s: SDTR Message failed for target %d lun %d\n", 2447 isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2448 if (isp->isp_type & ISP_HA_SCSI) { 2449 sdparam *sdp = isp->isp_param; 2450 isp->isp_update = 1; 2451 sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_SYNC; 2452 sdp->isp_devparam[XS_TGT(xs)].dev_update = 1; 2453 } 2454 break; 2455 2456 case RQCS_LVD_BUSERR: 2457 PRINTF("%s: Bad LVD Bus condition while talking to target %d " 2458 "lun %d\n", isp->isp_name, XS_TGT(xs), XS_LUN(xs)); 2459 break; 2460 2461 case RQCS_PORT_UNAVAILABLE: 2462 /* 2463 * No such port on the loop. Moral equivalent of SELTIMEO 2464 */ 2465 IDPRINTF(3, ("%s: Port Unavailable for target %d\n", 2466 isp->isp_name, XS_TGT(xs))); 2467 XS_SETERR(xs, HBA_SELTIMEOUT); 2468 return; 2469 2470 case RQCS_PORT_LOGGED_OUT: 2471 /* 2472 * It was there (maybe)- treat as a selection timeout. 2473 */ 2474 PRINTF("%s: port logout for target %d\n", 2475 isp->isp_name, XS_TGT(xs)); 2476 XS_SETERR(xs, HBA_SELTIMEOUT); 2477 return; 2478 2479 case RQCS_PORT_CHANGED: 2480 PRINTF("%s: port changed for target %d\n", 2481 isp->isp_name, XS_TGT(xs)); 2482 break; 2483 2484 case RQCS_PORT_BUSY: 2485 PRINTF("%s: port busy for target %d\n", 2486 isp->isp_name, XS_TGT(xs)); 2487 XS_SETERR(xs, HBA_TGTBSY); 2488 return; 2489 2490 default: 2491 PRINTF("%s: comp status %x\n", isp->isp_name, 2492 sp->req_completion_status); 2493 break; 2494 } 2495 XS_SETERR(xs, HBA_BOTCH); 2496 } 2497 2498 #define HINIB(x) ((x) >> 0x4) 2499 #define LONIB(x) ((x) & 0xf) 2500 #define MAKNIB(a, b) (((a) << 4) | (b)) 2501 static u_int8_t mbpcnt[] = { 2502 MAKNIB(1, 1), /* 0x00: MBOX_NO_OP */ 2503 MAKNIB(5, 5), /* 0x01: MBOX_LOAD_RAM */ 2504 MAKNIB(2, 0), /* 0x02: MBOX_EXEC_FIRMWARE */ 2505 MAKNIB(5, 5), /* 0x03: MBOX_DUMP_RAM */ 2506 MAKNIB(3, 3), /* 0x04: MBOX_WRITE_RAM_WORD */ 2507 MAKNIB(2, 3), /* 0x05: MBOX_READ_RAM_WORD */ 2508 MAKNIB(6, 6), /* 0x06: MBOX_MAILBOX_REG_TEST */ 2509 MAKNIB(2, 3), /* 0x07: MBOX_VERIFY_CHECKSUM */ 2510 MAKNIB(1, 3), /* 0x08: MBOX_ABOUT_FIRMWARE */ 2511 MAKNIB(0, 0), /* 0x09: */ 2512 MAKNIB(0, 0), /* 0x0a: */ 2513 MAKNIB(0, 0), /* 0x0b: */ 2514 MAKNIB(0, 0), /* 0x0c: */ 2515 MAKNIB(0, 0), /* 0x0d: */ 2516 MAKNIB(1, 2), /* 0x0e: MBOX_CHECK_FIRMWARE */ 2517 MAKNIB(0, 0), /* 0x0f: */ 2518 MAKNIB(5, 5), /* 0x10: MBOX_INIT_REQ_QUEUE */ 2519 MAKNIB(6, 6), /* 0x11: MBOX_INIT_RES_QUEUE */ 2520 MAKNIB(4, 4), /* 0x12: MBOX_EXECUTE_IOCB */ 2521 MAKNIB(2, 2), /* 0x13: MBOX_WAKE_UP */ 2522 MAKNIB(1, 6), /* 0x14: MBOX_STOP_FIRMWARE */ 2523 MAKNIB(4, 4), /* 0x15: MBOX_ABORT */ 2524 MAKNIB(2, 2), /* 0x16: MBOX_ABORT_DEVICE */ 2525 MAKNIB(3, 3), /* 0x17: MBOX_ABORT_TARGET */ 2526 MAKNIB(2, 2), /* 0x18: MBOX_BUS_RESET */ 2527 MAKNIB(2, 3), /* 0x19: MBOX_STOP_QUEUE */ 2528 MAKNIB(2, 3), /* 0x1a: MBOX_START_QUEUE */ 2529 MAKNIB(2, 3), /* 0x1b: MBOX_SINGLE_STEP_QUEUE */ 2530 MAKNIB(2, 3), /* 0x1c: MBOX_ABORT_QUEUE */ 2531 MAKNIB(2, 4), /* 0x1d: MBOX_GET_DEV_QUEUE_STATUS */ 2532 MAKNIB(0, 0), /* 0x1e: */ 2533 MAKNIB(1, 3), /* 0x1f: MBOX_GET_FIRMWARE_STATUS */ 2534 MAKNIB(1, 3), /* 0x20: MBOX_GET_INIT_SCSI_ID, MBOX_GET_LOOP_ID */ 2535 MAKNIB(1, 2), /* 0x21: MBOX_GET_SELECT_TIMEOUT */ 2536 MAKNIB(1, 3), /* 0x22: MBOX_GET_RETRY_COUNT */ 2537 MAKNIB(1, 2), /* 0x23: MBOX_GET_TAG_AGE_LIMIT */ 2538 MAKNIB(1, 2), /* 0x24: MBOX_GET_CLOCK_RATE */ 2539 MAKNIB(1, 2), /* 0x25: MBOX_GET_ACT_NEG_STATE */ 2540 MAKNIB(1, 2), /* 0x26: MBOX_GET_ASYNC_DATA_SETUP_TIME */ 2541 MAKNIB(1, 3), /* 0x27: MBOX_GET_PCI_PARAMS */ 2542 MAKNIB(2, 4), /* 0x28: MBOX_GET_TARGET_PARAMS */ 2543 MAKNIB(2, 4), /* 0x29: MBOX_GET_DEV_QUEUE_PARAMS */ 2544 MAKNIB(0, 0), /* 0x2a: */ 2545 MAKNIB(0, 0), /* 0x2b: */ 2546 MAKNIB(0, 0), /* 0x2c: */ 2547 MAKNIB(0, 0), /* 0x2d: */ 2548 MAKNIB(0, 0), /* 0x2e: */ 2549 MAKNIB(0, 0), /* 0x2f: */ 2550 MAKNIB(2, 2), /* 0x30: MBOX_SET_INIT_SCSI_ID */ 2551 MAKNIB(2, 2), /* 0x31: MBOX_SET_SELECT_TIMEOUT */ 2552 MAKNIB(3, 3), /* 0x32: MBOX_SET_RETRY_COUNT */ 2553 MAKNIB(2, 2), /* 0x33: MBOX_SET_TAG_AGE_LIMIT */ 2554 MAKNIB(2, 2), /* 0x34: MBOX_SET_CLOCK_RATE */ 2555 MAKNIB(2, 2), /* 0x35: MBOX_SET_ACTIVE_NEG_STATE */ 2556 MAKNIB(2, 2), /* 0x36: MBOX_SET_ASYNC_DATA_SETUP_TIME */ 2557 MAKNIB(3, 3), /* 0x37: MBOX_SET_PCI_CONTROL_PARAMS */ 2558 MAKNIB(4, 4), /* 0x38: MBOX_SET_TARGET_PARAMS */ 2559 MAKNIB(4, 4), /* 0x39: MBOX_SET_DEV_QUEUE_PARAMS */ 2560 MAKNIB(0, 0), /* 0x3a: */ 2561 MAKNIB(0, 0), /* 0x3b: */ 2562 MAKNIB(0, 0), /* 0x3c: */ 2563 MAKNIB(0, 0), /* 0x3d: */ 2564 MAKNIB(0, 0), /* 0x3e: */ 2565 MAKNIB(0, 0), /* 0x3f: */ 2566 MAKNIB(1, 2), /* 0x40: MBOX_RETURN_BIOS_BLOCK_ADDR */ 2567 MAKNIB(6, 1), /* 0x41: MBOX_WRITE_FOUR_RAM_WORDS */ 2568 MAKNIB(2, 3), /* 0x42: MBOX_EXEC_BIOS_IOCB */ 2569 MAKNIB(0, 0), /* 0x43: */ 2570 MAKNIB(0, 0), /* 0x44: */ 2571 MAKNIB(0, 0), /* 0x45: */ 2572 MAKNIB(0, 0), /* 0x46: */ 2573 MAKNIB(0, 0), /* 0x47: */ 2574 MAKNIB(0, 0), /* 0x48: */ 2575 MAKNIB(0, 0), /* 0x49: */ 2576 MAKNIB(2, 1), /* 0x4a: MBOX_SET_FIRMWARE_FEATURES */ 2577 MAKNIB(1, 2), /* 0x4b: MBOX_GET_FIRMWARE_FEATURES */ 2578 MAKNIB(0, 0), /* 0x4c: */ 2579 MAKNIB(0, 0), /* 0x4d: */ 2580 MAKNIB(0, 0), /* 0x4e: */ 2581 MAKNIB(0, 0), /* 0x4f: */ 2582 MAKNIB(0, 0), /* 0x50: */ 2583 MAKNIB(0, 0), /* 0x51: */ 2584 MAKNIB(0, 0), /* 0x52: */ 2585 MAKNIB(0, 0), /* 0x53: */ 2586 MAKNIB(8, 0), /* 0x54: MBOX_EXEC_COMMAND_IOCB_A64 */ 2587 MAKNIB(0, 0), /* 0x55: */ 2588 MAKNIB(0, 0), /* 0x56: */ 2589 MAKNIB(0, 0), /* 0x57: */ 2590 MAKNIB(0, 0), /* 0x58: */ 2591 MAKNIB(0, 0), /* 0x59: */ 2592 MAKNIB(0, 0), /* 0x5a: */ 2593 MAKNIB(0, 0), /* 0x5b: */ 2594 MAKNIB(0, 0), /* 0x5c: */ 2595 MAKNIB(0, 0), /* 0x5d: */ 2596 MAKNIB(0, 0), /* 0x5e: */ 2597 MAKNIB(0, 0), /* 0x5f: */ 2598 MAKNIB(8, 6), /* 0x60: MBOX_INIT_FIRMWARE */ 2599 MAKNIB(0, 0), /* 0x60: MBOX_GET_INIT_CONTROL_BLOCK (FORMAT?) */ 2600 MAKNIB(2, 1), /* 0x62: MBOX_INIT_LIP */ 2601 MAKNIB(8, 1), /* 0x63: MBOX_GET_FC_AL_POSITION_MAP */ 2602 MAKNIB(8, 1), /* 0x64: MBOX_GET_PORT_DB */ 2603 MAKNIB(3, 1), /* 0x65: MBOX_CLEAR_ACA */ 2604 MAKNIB(3, 1), /* 0x66: MBOX_TARGET_RESET */ 2605 MAKNIB(3, 1), /* 0x67: MBOX_CLEAR_TASK_SET */ 2606 MAKNIB(3, 1), /* 0x69: MBOX_ABORT_TASK_SET */ 2607 MAKNIB(1, 2) /* 0x69: MBOX_GET_FW_STATE */ 2608 }; 2609 #define NMBCOM (sizeof (mbpcnt) / sizeof (mbpcnt[0])) 2610 2611 static void 2612 isp_mboxcmd(isp, mbp) 2613 struct ispsoftc *isp; 2614 mbreg_t *mbp; 2615 { 2616 int outparam, inparam; 2617 int loops, dld = 0; 2618 u_int8_t opcode; 2619 2620 if (mbp->param[0] == ISP2100_SET_PCI_PARAM) { 2621 opcode = mbp->param[0] = MBOX_SET_PCI_PARAMETERS; 2622 inparam = 4; 2623 outparam = 4; 2624 goto command_known; 2625 } else if (mbp->param[0] > NMBCOM) { 2626 PRINTF("%s: bad command %x\n", isp->isp_name, mbp->param[0]); 2627 return; 2628 } 2629 2630 opcode = mbp->param[0]; 2631 inparam = HINIB(mbpcnt[mbp->param[0]]); 2632 outparam = LONIB(mbpcnt[mbp->param[0]]); 2633 2634 if (inparam == 0 && outparam == 0) { 2635 PRINTF("%s: no parameters for %x\n", isp->isp_name, 2636 mbp->param[0]); 2637 return; 2638 } 2639 2640 2641 /* 2642 * Check for variants 2643 */ 2644 #ifdef SCCLUN 2645 if (isp->isp_type & ISP_HA_FC) { 2646 switch (mbp->param[0]) { 2647 case MBOX_ABORT: 2648 inparam = 7; 2649 break; 2650 case MBOX_ABORT_DEVICE: 2651 case MBOX_START_QUEUE: 2652 case MBOX_STOP_QUEUE: 2653 case MBOX_SINGLE_STEP_QUEUE: 2654 case MBOX_ABORT_QUEUE: 2655 case MBOX_GET_DEV_QUEUE_STATUS: 2656 inparam = 3; 2657 break; 2658 default: 2659 break; 2660 } 2661 } 2662 #endif 2663 2664 command_known: 2665 2666 /* 2667 * Make sure we can send some words.. 2668 */ 2669 2670 loops = MBOX_DELAY_COUNT; 2671 while ((ISP_READ(isp, HCCR) & HCCR_HOST_INT) != 0) { 2672 SYS_DELAY(100); 2673 if (--loops < 0) { 2674 PRINTF("%s: isp_mboxcmd timeout #1\n", isp->isp_name); 2675 if (dld++) { 2676 return; 2677 } 2678 PRINTF("%s: but we'll try again, isr=%x\n", 2679 isp->isp_name, ISP_READ(isp, BIU_ISR)); 2680 if (ISP_READ(isp, BIU_SEMA) & 1) { 2681 u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0); 2682 if (isp_parse_async(isp, (int) mbox)) 2683 return; 2684 ISP_WRITE(isp, BIU_SEMA, 0); 2685 } 2686 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 2687 goto command_known; 2688 } 2689 } 2690 2691 /* 2692 * Write input parameters 2693 */ 2694 switch (inparam) { 2695 case 8: ISP_WRITE(isp, INMAILBOX7, mbp->param[7]); mbp->param[7] = 0; 2696 case 7: ISP_WRITE(isp, INMAILBOX6, mbp->param[6]); mbp->param[6] = 0; 2697 case 6: ISP_WRITE(isp, INMAILBOX5, mbp->param[5]); mbp->param[5] = 0; 2698 case 5: ISP_WRITE(isp, INMAILBOX4, mbp->param[4]); mbp->param[4] = 0; 2699 case 4: ISP_WRITE(isp, INMAILBOX3, mbp->param[3]); mbp->param[3] = 0; 2700 case 3: ISP_WRITE(isp, INMAILBOX2, mbp->param[2]); mbp->param[2] = 0; 2701 case 2: ISP_WRITE(isp, INMAILBOX1, mbp->param[1]); mbp->param[1] = 0; 2702 case 1: ISP_WRITE(isp, INMAILBOX0, mbp->param[0]); mbp->param[0] = 0; 2703 } 2704 2705 /* 2706 * Clear semaphore on mailbox registers 2707 */ 2708 ISP_WRITE(isp, BIU_SEMA, 0); 2709 2710 /* 2711 * Clear RISC int condition. 2712 */ 2713 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 2714 2715 /* 2716 * Set Host Interrupt condition so that RISC will pick up mailbox regs. 2717 */ 2718 ISP_WRITE(isp, HCCR, HCCR_CMD_SET_HOST_INT); 2719 2720 /* 2721 * Wait until RISC int is set, except 2100 2722 */ 2723 if ((isp->isp_type & ISP_HA_FC) == 0) { 2724 loops = MBOX_DELAY_COUNT; 2725 while ((ISP_READ(isp, BIU_ISR) & BIU_ISR_RISC_INT) == 0) { 2726 SYS_DELAY(100); 2727 if (--loops < 0) { 2728 PRINTF("%s: isp_mboxcmd timeout #2\n", 2729 isp->isp_name); 2730 return; 2731 } 2732 } 2733 } 2734 2735 /* 2736 * Check to make sure that the semaphore has been set. 2737 */ 2738 loops = MBOX_DELAY_COUNT; 2739 while ((ISP_READ(isp, BIU_SEMA) & 1) == 0) { 2740 SYS_DELAY(100); 2741 if (--loops < 0) { 2742 PRINTF("%s: isp_mboxcmd timeout #3\n", isp->isp_name); 2743 return; 2744 } 2745 } 2746 2747 /* 2748 * Make sure that the MBOX_BUSY has gone away 2749 */ 2750 loops = MBOX_DELAY_COUNT; 2751 while (ISP_READ(isp, OUTMAILBOX0) == MBOX_BUSY) { 2752 SYS_DELAY(100); 2753 if (--loops < 0) { 2754 PRINTF("%s: isp_mboxcmd timeout #4\n", isp->isp_name); 2755 return; 2756 } 2757 } 2758 2759 2760 /* 2761 * Pick up output parameters. 2762 */ 2763 switch (outparam) { 2764 case 8: mbp->param[7] = ISP_READ(isp, OUTMAILBOX7); 2765 case 7: mbp->param[6] = ISP_READ(isp, OUTMAILBOX6); 2766 case 6: mbp->param[5] = ISP_READ(isp, OUTMAILBOX5); 2767 case 5: mbp->param[4] = ISP_READ(isp, OUTMAILBOX4); 2768 case 4: mbp->param[3] = ISP_READ(isp, OUTMAILBOX3); 2769 case 3: mbp->param[2] = ISP_READ(isp, OUTMAILBOX2); 2770 case 2: mbp->param[1] = ISP_READ(isp, OUTMAILBOX1); 2771 case 1: mbp->param[0] = ISP_READ(isp, OUTMAILBOX0); 2772 } 2773 2774 /* 2775 * Clear RISC int. 2776 */ 2777 ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT); 2778 2779 /* 2780 * Release semaphore on mailbox registers 2781 */ 2782 ISP_WRITE(isp, BIU_SEMA, 0); 2783 2784 /* 2785 * Just to be chatty here... 2786 */ 2787 switch(mbp->param[0]) { 2788 case MBOX_COMMAND_COMPLETE: 2789 break; 2790 case MBOX_INVALID_COMMAND: 2791 IDPRINTF(2, ("%s: mbox cmd %x failed with INVALID_COMMAND\n", 2792 isp->isp_name, opcode)); 2793 break; 2794 case MBOX_HOST_INTERFACE_ERROR: 2795 PRINTF("%s: mbox cmd %x failed with HOST_INTERFACE_ERROR\n", 2796 isp->isp_name, opcode); 2797 break; 2798 case MBOX_TEST_FAILED: 2799 PRINTF("%s: mbox cmd %x failed with TEST_FAILED\n", 2800 isp->isp_name, opcode); 2801 break; 2802 case MBOX_COMMAND_ERROR: 2803 PRINTF("%s: mbox cmd %x failed with COMMAND_ERROR\n", 2804 isp->isp_name, opcode); 2805 break; 2806 case MBOX_COMMAND_PARAM_ERROR: 2807 PRINTF("%s: mbox cmd %x failed with COMMAND_PARAM_ERROR\n", 2808 isp->isp_name, opcode); 2809 break; 2810 2811 /* 2812 * Be silent about these... 2813 */ 2814 2815 case ASYNC_LOOP_UP: 2816 case ASYNC_LIP_OCCURRED: 2817 case ASYNC_PDB_CHANGED: 2818 break; 2819 2820 default: 2821 /* 2822 * The expected return of EXEC_FIRMWARE is zero. 2823 */ 2824 if ((opcode == MBOX_EXEC_FIRMWARE && mbp->param[0] != 0) || 2825 (opcode != MBOX_EXEC_FIRMWARE)) { 2826 PRINTF("%s: mbox cmd %x failed with error %x\n", 2827 isp->isp_name, opcode, mbp->param[0]); 2828 } 2829 break; 2830 } 2831 } 2832 2833 void 2834 isp_lostcmd(isp, xs) 2835 struct ispsoftc *isp; 2836 ISP_SCSI_XFER_T *xs; 2837 { 2838 mbreg_t mbs; 2839 2840 mbs.param[0] = MBOX_GET_FIRMWARE_STATUS; 2841 isp_mboxcmd(isp, &mbs); 2842 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 2843 isp_dumpregs(isp, "couldn't GET FIRMWARE STATUS"); 2844 return; 2845 } 2846 if (mbs.param[1]) { 2847 PRINTF("%s: %d commands on completion queue\n", 2848 isp->isp_name, mbs.param[1]); 2849 } 2850 if (XS_NULL(xs)) 2851 return; 2852 2853 mbs.param[0] = MBOX_GET_DEV_QUEUE_STATUS; 2854 mbs.param[1] = (XS_TGT(xs) << 8) | XS_LUN(xs); 2855 isp_mboxcmd(isp, &mbs); 2856 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 2857 isp_dumpregs(isp, "couldn't GET DEVICE QUEUE STATUS"); 2858 return; 2859 } 2860 PRINTF("%s: lost command for target %d lun %d, %d active of %d, " 2861 "Queue State: %x\n", isp->isp_name, XS_TGT(xs), 2862 XS_LUN(xs), mbs.param[2], mbs.param[3], mbs.param[1]); 2863 2864 isp_dumpregs(isp, "lost command"); 2865 /* 2866 * XXX: Need to try and do something to recover. 2867 */ 2868 } 2869 2870 static void 2871 isp_dumpregs(isp, msg) 2872 struct ispsoftc *isp; 2873 const char *msg; 2874 { 2875 PRINTF("%s: %s\n", isp->isp_name, msg); 2876 if (isp->isp_type & ISP_HA_SCSI) 2877 PRINTF(" biu_conf1=%x", ISP_READ(isp, BIU_CONF1)); 2878 else 2879 PRINTF(" biu_csr=%x", ISP_READ(isp, BIU2100_CSR)); 2880 PRINTF(" biu_icr=%x biu_isr=%x biu_sema=%x ", ISP_READ(isp, BIU_ICR), 2881 ISP_READ(isp, BIU_ISR), ISP_READ(isp, BIU_SEMA)); 2882 PRINTF("risc_hccr=%x\n", ISP_READ(isp, HCCR)); 2883 2884 if (isp->isp_type & ISP_HA_SCSI) { 2885 ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE); 2886 PRINTF(" cdma_conf=%x cdma_sts=%x cdma_fifostat=%x\n", 2887 ISP_READ(isp, CDMA_CONF), ISP_READ(isp, CDMA_STATUS), 2888 ISP_READ(isp, CDMA_FIFO_STS)); 2889 PRINTF(" ddma_conf=%x ddma_sts=%x ddma_fifostat=%x\n", 2890 ISP_READ(isp, DDMA_CONF), ISP_READ(isp, DDMA_STATUS), 2891 ISP_READ(isp, DDMA_FIFO_STS)); 2892 PRINTF(" sxp_int=%x sxp_gross=%x sxp(scsi_ctrl)=%x\n", 2893 ISP_READ(isp, SXP_INTERRUPT), 2894 ISP_READ(isp, SXP_GROSS_ERR), 2895 ISP_READ(isp, SXP_PINS_CONTROL)); 2896 ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); 2897 } 2898 ISP_DUMPREGS(isp); 2899 } 2900 2901 static void 2902 isp_dumpxflist(isp) 2903 struct ispsoftc *isp; 2904 { 2905 volatile ISP_SCSI_XFER_T *xs; 2906 int i, hdp; 2907 2908 for (hdp = i = 0; i < RQUEST_QUEUE_LEN; i++) { 2909 xs = isp->isp_xflist[i]; 2910 if (xs == NULL) { 2911 continue; 2912 } 2913 if (hdp == 0) { 2914 PRINTF("%s: active requests\n", isp->isp_name); 2915 hdp++; 2916 } 2917 PRINTF(" Active Handle %d: tgt %d lun %d dlen %d\n", 2918 i+1, XS_TGT(xs), XS_LUN(xs), XS_XFRLEN(xs)); 2919 } 2920 } 2921 2922 static void 2923 isp_fw_state(isp) 2924 struct ispsoftc *isp; 2925 { 2926 mbreg_t mbs; 2927 if (isp->isp_type & ISP_HA_FC) { 2928 int once = 0; 2929 fcparam *fcp = isp->isp_param; 2930 again: 2931 mbs.param[0] = MBOX_GET_FW_STATE; 2932 isp_mboxcmd(isp, &mbs); 2933 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 2934 if (mbs.param[0] == ASYNC_LIP_OCCURRED || 2935 mbs.param[0] == ASYNC_PDB_CHANGED || 2936 mbs.param[0] == ASYNC_LOOP_UP) { 2937 if (once++ < 2) { 2938 goto again; 2939 } 2940 } 2941 isp_dumpregs(isp, "GET FIRMWARE STATE failed"); 2942 return; 2943 } 2944 fcp->isp_fwstate = mbs.param[1]; 2945 } 2946 } 2947 2948 static void 2949 isp_update(isp) 2950 struct ispsoftc *isp; 2951 { 2952 int tgt; 2953 mbreg_t mbs; 2954 sdparam *sdp; 2955 2956 isp->isp_update = 0; 2957 2958 if (isp->isp_type & ISP_HA_FC) { 2959 return; 2960 } 2961 2962 sdp = isp->isp_param; 2963 for (tgt = 0; tgt < MAX_TARGETS; tgt++) { 2964 u_int16_t flags, period, offset, changed; 2965 int get; 2966 2967 if (sdp->isp_devparam[tgt].dev_enable == 0) { 2968 continue; 2969 } 2970 2971 if (sdp->isp_devparam[tgt].dev_update) { 2972 mbs.param[0] = MBOX_SET_TARGET_PARAMS; 2973 mbs.param[2] = sdp->isp_devparam[tgt].dev_flags; 2974 mbs.param[3] = 2975 (sdp->isp_devparam[tgt].sync_offset << 8) | 2976 (sdp->isp_devparam[tgt].sync_period); 2977 sdp->isp_devparam[tgt].dev_update = 0; 2978 sdp->isp_devparam[tgt].dev_refresh = 1; 2979 isp->isp_update = 1; 2980 get = 0; 2981 } else if (sdp->isp_devparam[tgt].dev_refresh) { 2982 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 2983 sdp->isp_devparam[tgt].dev_refresh = 0; 2984 get = 1; 2985 } else { 2986 continue; 2987 } 2988 mbs.param[1] = tgt << 8; 2989 isp_mboxcmd(isp, &mbs); 2990 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 2991 PRINTF("%s: failed to %cet SCSI parameters for " 2992 "target %d\n", isp->isp_name, (get)? 'g' : 's', 2993 tgt); 2994 continue; 2995 } 2996 2997 if (get == 0) { 2998 sdp->isp_devparam[tgt].cur_dflags = 2999 sdp->isp_devparam[tgt].dev_flags; 3000 continue; 3001 } 3002 flags = mbs.param[2]; 3003 period = mbs.param[3] & 0xff; 3004 offset = mbs.param[3] >> 8; 3005 if (sdp->isp_devparam[tgt].cur_dflags != flags || 3006 sdp->isp_devparam[tgt].sync_period != period || 3007 sdp->isp_devparam[tgt].sync_offset != offset) { 3008 IDPRINTF(3, ("%s: tgt %d flags 0x%x period %d " 3009 "off %d\n", isp->isp_name, tgt, flags, 3010 period, offset)); 3011 changed = 1; 3012 } else { 3013 changed = 0; 3014 } 3015 3016 sdp->isp_devparam[tgt].cur_dflags = flags; 3017 sdp->isp_devparam[tgt].dev_flags = flags; 3018 sdp->isp_devparam[tgt].sync_period = period; 3019 sdp->isp_devparam[tgt].sync_offset = offset; 3020 if (sdp->isp_devparam[tgt].dev_announced == 0 || changed) { 3021 if (isp_async(isp, ISPASYNC_NEW_TGT_PARAMS, &tgt)) 3022 sdp->isp_devparam[tgt].dev_announced = 0; 3023 else 3024 sdp->isp_devparam[tgt].dev_announced = 1; 3025 } 3026 } 3027 } 3028 3029 static void 3030 isp_setdfltparm(isp) 3031 struct ispsoftc *isp; 3032 { 3033 int i, use_nvram; 3034 mbreg_t mbs; 3035 sdparam *sdp; 3036 3037 /* 3038 * Been there, done that, got the T-shirt... 3039 */ 3040 if (isp->isp_gotdparms) { 3041 IDPRINTF(3, ("%s: already have dparms\n", isp->isp_name)); 3042 return; 3043 } 3044 isp->isp_gotdparms = 1; 3045 3046 use_nvram = (isp_read_nvram(isp) == 0); 3047 if (use_nvram) { 3048 return; 3049 } 3050 if (isp->isp_type & ISP_HA_FC) { 3051 fcparam *fcp = (fcparam *) isp->isp_param; 3052 fcp->isp_maxfrmlen = ICB_DFLT_FRMLEN; 3053 fcp->isp_maxalloc = 256; 3054 fcp->isp_execthrottle = 16; 3055 fcp->isp_retry_delay = 5; 3056 fcp->isp_retry_count = 0; 3057 /* 3058 * It would be nice to fake up a WWN in case we don't 3059 * get one out of NVRAM. Solaris does this for SOCAL 3060 * cards that don't have SBus properties- it sets up 3061 * a WWN based upon the system MAC Address. 3062 */ 3063 fcp->isp_wwn = 0; 3064 return; 3065 } 3066 3067 sdp = (sdparam *) isp->isp_param; 3068 mbs.param[0] = MBOX_GET_ACT_NEG_STATE; 3069 isp_mboxcmd(isp, &mbs); 3070 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3071 IDPRINTF(2, ("could not GET ACT NEG STATE\n")); 3072 sdp->isp_req_ack_active_neg = 1; 3073 sdp->isp_data_line_active_neg = 1; 3074 } else { 3075 sdp->isp_req_ack_active_neg = (mbs.param[1] >> 4) & 0x1; 3076 sdp->isp_data_line_active_neg = (mbs.param[1] >> 5) & 0x1; 3077 } 3078 for (i = 0; i < MAX_TARGETS; i++) { 3079 3080 mbs.param[0] = MBOX_GET_TARGET_PARAMS; 3081 mbs.param[1] = i << 8; 3082 isp_mboxcmd(isp, &mbs); 3083 if (mbs.param[0] != MBOX_COMMAND_COMPLETE) { 3084 PRINTF("%s: can't get SCSI parameters for target %d\n", 3085 isp->isp_name, i); 3086 sdp->isp_devparam[i].sync_period = 0; 3087 sdp->isp_devparam[i].sync_offset = 0; 3088 sdp->isp_devparam[i].dev_flags = DPARM_SAFE_DFLT; 3089 continue; 3090 } 3091 sdp->isp_devparam[i].dev_flags = mbs.param[2]; 3092 3093 /* 3094 * The maximum period we can really see 3095 * here is 100 (decimal), or 400 ns. 3096 * For some unknown reason we sometimes 3097 * get back wildass numbers from the 3098 * boot device's parameters. 3099 * 3100 * XXX: Hmm- this may be based on a different 3101 * XXX: clock rate. 3102 */ 3103 if ((mbs.param[3] & 0xff) <= 0x64) { 3104 sdp->isp_devparam[i].sync_period = mbs.param[3] & 0xff; 3105 sdp->isp_devparam[i].sync_offset = mbs.param[3] >> 8; 3106 } 3107 3108 /* 3109 * It is not safe to run Ultra Mode with a clock < 60. 3110 */ 3111 if (((sdp->isp_clock && sdp->isp_clock < 60) || 3112 (isp->isp_type < ISP_HA_SCSI_1020A)) && 3113 (sdp->isp_devparam[i].sync_period == 3114 (ISP_20M_SYNCPARMS & 0xff))) { 3115 sdp->isp_devparam[i].sync_offset = 3116 ISP_10M_SYNCPARMS >> 8; 3117 sdp->isp_devparam[i].sync_period = 3118 ISP_10M_SYNCPARMS & 0xff; 3119 } 3120 3121 } 3122 3123 /* 3124 * Set Default Host Adapter Parameters 3125 */ 3126 sdp->isp_cmd_dma_burst_enable = 1; 3127 sdp->isp_data_dma_burst_enabl = 1; 3128 sdp->isp_fifo_threshold = 0; 3129 sdp->isp_initiator_id = 7; 3130 if (isp->isp_type >= ISP_HA_SCSI_1040) { 3131 sdp->isp_async_data_setup = 9; 3132 } else { 3133 sdp->isp_async_data_setup = 6; 3134 } 3135 sdp->isp_selection_timeout = 250; 3136 sdp->isp_max_queue_depth = 128; 3137 sdp->isp_tag_aging = 8; 3138 sdp->isp_bus_reset_delay = 3; 3139 sdp->isp_retry_count = 0; 3140 sdp->isp_retry_delay = 1; 3141 3142 for (i = 0; i < MAX_TARGETS; i++) { 3143 sdp->isp_devparam[i].exc_throttle = 16; 3144 sdp->isp_devparam[i].dev_enable = 1; 3145 } 3146 } 3147 3148 /* 3149 * Re-initialize the ISP and complete all orphaned commands 3150 * with a 'botched' notice. 3151 * 3152 * Locks held prior to coming here. 3153 */ 3154 3155 void 3156 isp_restart(isp) 3157 struct ispsoftc *isp; 3158 { 3159 ISP_SCSI_XFER_T *tlist[RQUEST_QUEUE_LEN], *xs; 3160 int i; 3161 3162 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 3163 tlist[i] = (ISP_SCSI_XFER_T *) isp->isp_xflist[i]; 3164 isp->isp_xflist[i] = NULL; 3165 } 3166 isp_reset(isp); 3167 if (isp->isp_state == ISP_RESETSTATE) { 3168 isp_init(isp); 3169 if (isp->isp_state == ISP_INITSTATE) { 3170 isp->isp_state = ISP_RUNSTATE; 3171 } 3172 } 3173 if (isp->isp_state != ISP_RUNSTATE) { 3174 PRINTF("%s: isp_restart cannot restart ISP\n", isp->isp_name); 3175 } 3176 3177 for (i = 0; i < RQUEST_QUEUE_LEN; i++) { 3178 xs = tlist[i]; 3179 if (XS_NULL(xs)) { 3180 continue; 3181 } 3182 if (isp->isp_nactive > 0) 3183 isp->isp_nactive--; 3184 XS_RESID(xs) = XS_XFRLEN(xs); 3185 XS_SETERR(xs, HBA_BUSRESET); 3186 XS_CMD_DONE(xs); 3187 } 3188 } 3189 3190 /* 3191 * Miscellaneous debug statements. 3192 */ 3193 static void 3194 isp_prtstst(sp) 3195 ispstatusreq_t *sp; 3196 { 3197 PRINTF("states->"); 3198 if (sp->req_state_flags & RQSF_GOT_BUS) 3199 PRINTF("GOT_BUS "); 3200 if (sp->req_state_flags & RQSF_GOT_TARGET) 3201 PRINTF("GOT_TGT "); 3202 if (sp->req_state_flags & RQSF_SENT_CDB) 3203 PRINTF("SENT_CDB "); 3204 if (sp->req_state_flags & RQSF_XFRD_DATA) 3205 PRINTF("XFRD_DATA "); 3206 if (sp->req_state_flags & RQSF_GOT_STATUS) 3207 PRINTF("GOT_STS "); 3208 if (sp->req_state_flags & RQSF_GOT_SENSE) 3209 PRINTF("GOT_SNS "); 3210 if (sp->req_state_flags & RQSF_XFER_COMPLETE) 3211 PRINTF("XFR_CMPLT "); 3212 PRINTF("\n"); 3213 PRINTF("status->"); 3214 if (sp->req_status_flags & RQSTF_DISCONNECT) 3215 PRINTF("Disconnect "); 3216 if (sp->req_status_flags & RQSTF_SYNCHRONOUS) 3217 PRINTF("Sync_xfr "); 3218 if (sp->req_status_flags & RQSTF_PARITY_ERROR) 3219 PRINTF("Parity "); 3220 if (sp->req_status_flags & RQSTF_BUS_RESET) 3221 PRINTF("Bus_Reset "); 3222 if (sp->req_status_flags & RQSTF_DEVICE_RESET) 3223 PRINTF("Device_Reset "); 3224 if (sp->req_status_flags & RQSTF_ABORTED) 3225 PRINTF("Aborted "); 3226 if (sp->req_status_flags & RQSTF_TIMEOUT) 3227 PRINTF("Timeout "); 3228 if (sp->req_status_flags & RQSTF_NEGOTIATION) 3229 PRINTF("Negotiation "); 3230 PRINTF("\n"); 3231 } 3232 3233 static char * 3234 isp2100_fw_statename(state) 3235 int state; 3236 { 3237 switch(state) { 3238 case FW_CONFIG_WAIT: return "Config Wait"; 3239 case FW_WAIT_AL_PA: return "Waiting for AL/PA"; 3240 case FW_WAIT_LOGIN: return "Wait Login"; 3241 case FW_READY: return "Ready"; 3242 case FW_LOSS_OF_SYNC: return "Loss Of Sync"; 3243 case FW_ERROR: return "Error"; 3244 case FW_REINIT: return "Re-Init"; 3245 case FW_NON_PART: return "Nonparticipating"; 3246 default: return "eh?"; 3247 } 3248 } 3249 3250 /* 3251 * NVRAM Routines 3252 */ 3253 3254 static int 3255 isp_read_nvram(isp) 3256 struct ispsoftc *isp; 3257 { 3258 int i, amt; 3259 u_int8_t csum, minversion; 3260 union { 3261 u_int8_t _x[ISP2100_NVRAM_SIZE]; 3262 u_int16_t _s[ISP2100_NVRAM_SIZE>>1]; 3263 } _n; 3264 #define nvram_data _n._x 3265 #define nvram_words _n._s 3266 3267 if (isp->isp_type & ISP_HA_FC) { 3268 amt = ISP2100_NVRAM_SIZE; 3269 minversion = 1; 3270 } else { 3271 amt = ISP_NVRAM_SIZE; 3272 minversion = 2; 3273 } 3274 3275 /* 3276 * Just read the first two words first to see if we have a valid 3277 * NVRAM to continue reading the rest with. 3278 */ 3279 for (i = 0; i < 2; i++) { 3280 isp_rdnvram_word(isp, i, &nvram_words[i]); 3281 } 3282 if (nvram_data[0] != 'I' || nvram_data[1] != 'S' || 3283 nvram_data[2] != 'P') { 3284 if (isp->isp_bustype != ISP_BT_SBUS) { 3285 PRINTF("%s: invalid NVRAM header\n", isp->isp_name); 3286 } 3287 return (-1); 3288 } 3289 for (i = 2; i < amt>>1; i++) { 3290 isp_rdnvram_word(isp, i, &nvram_words[i]); 3291 } 3292 for (csum = 0, i = 0; i < amt; i++) { 3293 csum += nvram_data[i]; 3294 } 3295 if (csum != 0) { 3296 PRINTF("%s: invalid NVRAM checksum\n", isp->isp_name); 3297 return (-1); 3298 } 3299 if (ISP_NVRAM_VERSION(nvram_data) < minversion) { 3300 PRINTF("%s: version %d NVRAM not understood\n", isp->isp_name, 3301 ISP_NVRAM_VERSION(nvram_data)); 3302 return (-1); 3303 } 3304 3305 if (isp->isp_type & ISP_HA_SCSI) { 3306 sdparam *sdp = (sdparam *) isp->isp_param; 3307 3308 sdp->isp_fifo_threshold = 3309 ISP_NVRAM_FIFO_THRESHOLD(nvram_data) | 3310 (ISP_NVRAM_FIFO_THRESHOLD_128(nvram_data) << 2); 3311 3312 sdp->isp_initiator_id = 3313 ISP_NVRAM_INITIATOR_ID(nvram_data); 3314 3315 sdp->isp_bus_reset_delay = 3316 ISP_NVRAM_BUS_RESET_DELAY(nvram_data); 3317 3318 sdp->isp_retry_count = 3319 ISP_NVRAM_BUS_RETRY_COUNT(nvram_data); 3320 3321 sdp->isp_retry_delay = 3322 ISP_NVRAM_BUS_RETRY_DELAY(nvram_data); 3323 3324 sdp->isp_async_data_setup = 3325 ISP_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data); 3326 3327 if (isp->isp_type >= ISP_HA_SCSI_1040) { 3328 if (sdp->isp_async_data_setup < 9) { 3329 sdp->isp_async_data_setup = 9; 3330 } 3331 } else { 3332 if (sdp->isp_async_data_setup != 6) { 3333 sdp->isp_async_data_setup = 6; 3334 } 3335 } 3336 3337 sdp->isp_req_ack_active_neg = 3338 ISP_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data); 3339 3340 sdp->isp_data_line_active_neg = 3341 ISP_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data); 3342 3343 sdp->isp_data_dma_burst_enabl = 3344 ISP_NVRAM_DATA_DMA_BURST_ENABLE(nvram_data); 3345 3346 sdp->isp_cmd_dma_burst_enable = 3347 ISP_NVRAM_CMD_DMA_BURST_ENABLE(nvram_data); 3348 3349 sdp->isp_tag_aging = 3350 ISP_NVRAM_TAG_AGE_LIMIT(nvram_data); 3351 3352 sdp->isp_selection_timeout = 3353 ISP_NVRAM_SELECTION_TIMEOUT(nvram_data); 3354 3355 sdp->isp_max_queue_depth = 3356 ISP_NVRAM_MAX_QUEUE_DEPTH(nvram_data); 3357 3358 sdp->isp_fast_mttr = ISP_NVRAM_FAST_MTTR_ENABLE(nvram_data); 3359 #if 0 3360 PRINTF("%s: fifo_threshold = 0x%x cbena%d dbena%d\n", 3361 isp->isp_name, sdp->isp_fifo_threshold, 3362 sdp->isp_cmd_dma_burst_enable, 3363 sdp->isp_data_dma_burst_enabl); 3364 #endif 3365 for (i = 0; i < 16; i++) { 3366 sdp->isp_devparam[i].dev_enable = 3367 ISP_NVRAM_TGT_DEVICE_ENABLE(nvram_data, i); 3368 sdp->isp_devparam[i].exc_throttle = 3369 ISP_NVRAM_TGT_EXEC_THROTTLE(nvram_data, i); 3370 sdp->isp_devparam[i].sync_offset = 3371 ISP_NVRAM_TGT_SYNC_OFFSET(nvram_data, i); 3372 sdp->isp_devparam[i].sync_period = 3373 ISP_NVRAM_TGT_SYNC_PERIOD(nvram_data, i); 3374 3375 if (isp->isp_type < ISP_HA_SCSI_1040) { 3376 /* 3377 * If we're not ultra, we can't possibly 3378 * be a shorter period than this. 3379 */ 3380 if (sdp->isp_devparam[i].sync_period < 0x19) { 3381 sdp->isp_devparam[i].sync_period = 3382 0x19; 3383 } 3384 if (sdp->isp_devparam[i].sync_offset > 0xc) { 3385 sdp->isp_devparam[i].sync_offset = 3386 0x0c; 3387 } 3388 } else { 3389 if (sdp->isp_devparam[i].sync_offset > 0x8) { 3390 sdp->isp_devparam[i].sync_offset = 0x8; 3391 } 3392 } 3393 3394 sdp->isp_devparam[i].dev_flags = 0; 3395 3396 if (ISP_NVRAM_TGT_RENEG(nvram_data, i)) 3397 sdp->isp_devparam[i].dev_flags |= DPARM_RENEG; 3398 if (ISP_NVRAM_TGT_QFRZ(nvram_data, i)) { 3399 PRINTF("%s: not supporting QFRZ option for " 3400 "target %d\n", isp->isp_name, i); 3401 } 3402 sdp->isp_devparam[i].dev_flags |= DPARM_ARQ; 3403 if (ISP_NVRAM_TGT_ARQ(nvram_data, i) == 0) { 3404 PRINTF("%s: not disabling ARQ option for " 3405 "target %d\n", isp->isp_name, i); 3406 } 3407 if (ISP_NVRAM_TGT_TQING(nvram_data, i)) 3408 sdp->isp_devparam[i].dev_flags |= DPARM_TQING; 3409 if (ISP_NVRAM_TGT_SYNC(nvram_data, i)) 3410 sdp->isp_devparam[i].dev_flags |= DPARM_SYNC; 3411 if (ISP_NVRAM_TGT_WIDE(nvram_data, i)) 3412 sdp->isp_devparam[i].dev_flags |= DPARM_WIDE; 3413 if (ISP_NVRAM_TGT_PARITY(nvram_data, i)) 3414 sdp->isp_devparam[i].dev_flags |= DPARM_PARITY; 3415 if (ISP_NVRAM_TGT_DISC(nvram_data, i)) 3416 sdp->isp_devparam[i].dev_flags |= DPARM_DISC; 3417 } 3418 } else { 3419 fcparam *fcp = (fcparam *) isp->isp_param; 3420 union { 3421 struct { 3422 #if BYTE_ORDER == BIG_ENDIAN 3423 u_int32_t hi32; 3424 u_int32_t lo32; 3425 #else 3426 u_int32_t lo32; 3427 u_int32_t hi32; 3428 #endif 3429 } wds; 3430 u_int64_t full64; 3431 } wwnstore; 3432 3433 wwnstore.full64 = ISP2100_NVRAM_NODE_NAME(nvram_data); 3434 PRINTF("%s: Adapter WWN 0x%08x%08x\n", isp->isp_name, 3435 wwnstore.wds.hi32, wwnstore.wds.lo32); 3436 fcp->isp_wwn = wwnstore.full64; 3437 wwnstore.full64 = ISP2100_NVRAM_BOOT_NODE_NAME(nvram_data); 3438 if (wwnstore.full64 != 0) { 3439 PRINTF("%s: BOOT DEVICE WWN 0x%08x%08x\n", 3440 isp->isp_name, wwnstore.wds.hi32, 3441 wwnstore.wds.lo32); 3442 } 3443 fcp->isp_maxalloc = 3444 ISP2100_NVRAM_MAXIOCBALLOCATION(nvram_data); 3445 fcp->isp_maxfrmlen = 3446 ISP2100_NVRAM_MAXFRAMELENGTH(nvram_data); 3447 fcp->isp_retry_delay = 3448 ISP2100_NVRAM_RETRY_DELAY(nvram_data); 3449 fcp->isp_retry_count = 3450 ISP2100_NVRAM_RETRY_COUNT(nvram_data); 3451 fcp->isp_loopid = 3452 ISP2100_NVRAM_HARDLOOPID(nvram_data); 3453 fcp->isp_execthrottle = 3454 ISP2100_NVRAM_EXECUTION_THROTTLE(nvram_data); 3455 } 3456 return (0); 3457 } 3458 3459 static void 3460 isp_rdnvram_word(isp, wo, rp) 3461 struct ispsoftc *isp; 3462 int wo; 3463 u_int16_t *rp; 3464 { 3465 int i, cbits; 3466 u_int16_t bit, rqst; 3467 3468 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 3469 SYS_DELAY(2); 3470 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 3471 SYS_DELAY(2); 3472 3473 if (isp->isp_type & ISP_HA_FC) { 3474 wo &= ((ISP2100_NVRAM_SIZE >> 1) - 1); 3475 rqst = (ISP_NVRAM_READ << 8) | wo; 3476 cbits = 10; 3477 } else { 3478 wo &= ((ISP_NVRAM_SIZE >> 1) - 1); 3479 rqst = (ISP_NVRAM_READ << 6) | wo; 3480 cbits = 8; 3481 } 3482 3483 /* 3484 * Clock the word select request out... 3485 */ 3486 for (i = cbits; i >= 0; i--) { 3487 if ((rqst >> i) & 1) { 3488 bit = BIU_NVRAM_SELECT | BIU_NVRAM_DATAOUT; 3489 } else { 3490 bit = BIU_NVRAM_SELECT; 3491 } 3492 ISP_WRITE(isp, BIU_NVRAM, bit); 3493 SYS_DELAY(2); 3494 ISP_WRITE(isp, BIU_NVRAM, bit | BIU_NVRAM_CLOCK); 3495 SYS_DELAY(2); 3496 ISP_WRITE(isp, BIU_NVRAM, bit); 3497 SYS_DELAY(2); 3498 } 3499 /* 3500 * Now read the result back in (bits come back in MSB format). 3501 */ 3502 *rp = 0; 3503 for (i = 0; i < 16; i++) { 3504 u_int16_t rv; 3505 *rp <<= 1; 3506 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK); 3507 SYS_DELAY(2); 3508 rv = ISP_READ(isp, BIU_NVRAM); 3509 if (rv & BIU_NVRAM_DATAIN) { 3510 *rp |= 1; 3511 } 3512 SYS_DELAY(2); 3513 ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT); 3514 SYS_DELAY(2); 3515 } 3516 ISP_WRITE(isp, BIU_NVRAM, 0); 3517 SYS_DELAY(2); 3518 #if BYTE_ORDER == BIG_ENDIAN 3519 *rp = ((*rp >> 8) | ((*rp & 0xff) << 8)); 3520 #endif 3521 } 3522