1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 */ 52 53 #include <sys/cdefs.h> 54 __FBSDID("$FreeBSD$"); 55 56 #include <dev/isci/scil/scic_sds_smp_request.h> 57 #include <dev/isci/scil/scic_sds_logger.h> 58 #include <dev/isci/scil/scic_sds_controller.h> 59 #include <dev/isci/scil/scic_sds_remote_device.h> 60 #include <dev/isci/scil/scic_remote_device.h> 61 #include <dev/isci/scil/sci_util.h> 62 #include <dev/isci/sci_environment.h> 63 #include <dev/isci/scil/intel_sas.h> 64 #include <dev/isci/scil/scic_sds_request.h> 65 #include <dev/isci/scil/scic_controller.h> 66 #include <dev/isci/scil/scu_completion_codes.h> 67 #include <dev/isci/scil/scu_task_context.h> 68 #include <dev/isci/scil/sci_base_state_machine.h> 69 70 /** 71 * This method return the memory space required for STP PIO requests. 72 * 73 * @return U32 74 */ 75 U32 scic_sds_smp_request_get_object_size(void) 76 { 77 return sizeof(SCIC_SDS_REQUEST_T) 78 + sizeof(SMP_REQUEST_T) 79 + sizeof(U32) 80 + sizeof(SMP_RESPONSE_T) 81 + sizeof(U32) 82 + sizeof(SCU_TASK_CONTEXT_T) 83 + CACHE_LINE_SIZE; 84 } 85 86 /** 87 * This macro returns the address of the smp command buffer in the smp request 88 * memory. No need to cast to SMP request type. 89 */ 90 #define scic_sds_smp_request_get_command_buffer_unaligned(memory) \ 91 ( ((char *)(memory)) + sizeof(SCIC_SDS_REQUEST_T) ) 92 93 /** 94 * This macro aligns the smp command buffer in DWORD alignment 95 */ 96 #define scic_sds_smp_request_align_command_buffer(address) \ 97 ((char *)( \ 98 (((POINTER_UINT)(address)) + (sizeof(U32) - 1)) \ 99 & ~(sizeof(U32)- 1) \ 100 )) 101 102 /** 103 * This macro returns the DWORD-aligned smp command buffer 104 */ 105 #define scic_sds_smp_request_get_command_buffer(memory) \ 106 ((char *) \ 107 ((char *)scic_sds_smp_request_align_command_buffer( \ 108 (char *) scic_sds_smp_request_get_command_buffer_unaligned(memory) \ 109 ))) 110 111 /** 112 * This macro returns the address of the smp response buffer in the smp request 113 * memory. 114 */ 115 #define scic_sds_smp_request_get_response_buffer_unaligned(memory) \ 116 ( ((char *)(scic_sds_smp_request_get_command_buffer(memory))) \ 117 + sizeof(SMP_REQUEST_T) ) 118 119 /** 120 * This macro aligns the smp command buffer in DWORD alignment 121 */ 122 #define scic_sds_smp_request_align_response_buffer(address) \ 123 ((char *)( \ 124 (((POINTER_UINT)(address)) + (sizeof(U32) - 1)) \ 125 & ~(sizeof(U32)- 1) \ 126 )) 127 128 /** 129 * This macro returns the DWORD-aligned smp resposne buffer 130 */ 131 #define scic_sds_smp_request_get_response_buffer(memory) \ 132 ((char *) \ 133 ((char *)scic_sds_smp_request_align_response_buffer( \ 134 (char *) scic_sds_smp_request_get_response_buffer_unaligned(memory) \ 135 ))) 136 137 /** 138 * This macro returs the task context buffer for the SMP request. 139 */ 140 #define scic_sds_smp_request_get_task_context_buffer_unaligned(memory) \ 141 ((SCU_TASK_CONTEXT_T *)( \ 142 ((char *)(scic_sds_smp_request_get_response_buffer(memory))) \ 143 + sizeof(SMP_RESPONSE_T) \ 144 )) 145 146 /** 147 * This macro returns the dword-aligned smp task context buffer 148 */ 149 #define scic_sds_smp_request_get_task_context_buffer(memory) \ 150 ((SCU_TASK_CONTEXT_T *)( \ 151 ((char *)scic_sds_request_align_task_context_buffer( \ 152 (char *)scic_sds_smp_request_get_task_context_buffer_unaligned(memory)) \ 153 ))) 154 155 /** 156 * @brief This method build the remainder of the IO request object. 157 * 158 * @pre The scic_sds_general_request_construct() must be called before this 159 * call is valid. 160 * 161 * @param[in] this_request This parameter specifies the request object being 162 * constructed. 163 * 164 * @return none 165 */ 166 167 void scic_sds_smp_request_assign_buffers( 168 SCIC_SDS_REQUEST_T *this_request 169 ) 170 { 171 // Assign all of the buffer pointers 172 this_request->command_buffer = 173 scic_sds_smp_request_get_command_buffer(this_request); 174 this_request->response_buffer = 175 scic_sds_smp_request_get_response_buffer(this_request); 176 this_request->sgl_element_pair_buffer = NULL; 177 178 if (this_request->was_tag_assigned_by_user == FALSE) 179 { 180 this_request->task_context_buffer = 181 scic_sds_smp_request_get_task_context_buffer(this_request); 182 } 183 184 } 185 /** 186 * @brief This method is called by the SCI user to build an SMP 187 * IO request. 188 * 189 * @pre 190 * - The user must have previously called scic_io_request_construct() 191 * on the supplied IO request. 192 * 193 * @param[in] scic_io_request This parameter specifies the handle to the 194 * io request object to be built. 195 * 196 * @return Indicate if the controller successfully built the IO request. 197 * @retval SCI_SUCCESS This value is returned if the IO request was 198 * successfully built. 199 * @retval SCI_FAILURE_UNSUPPORTED_PROTOCOL This value is returned if the 200 * remote_device does not support the SMP protocol. 201 * @retval SCI_FAILURE_INVALID_ASSOCIATION This value is returned if the 202 * user did not properly set the association between the SCIC IO 203 * request and the user's IO request. Please refer to the 204 * sci_object_set_association() routine for more 205 * information. 206 */ 207 SCI_STATUS scic_io_request_construct_smp( 208 SCI_IO_REQUEST_HANDLE_T scic_smp_request 209 ) 210 { 211 SMP_REQUEST_T smp_request; 212 213 SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *) scic_smp_request; 214 SCIC_LOG_TRACE(( 215 sci_base_object_get_logger(this_request), 216 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 217 "scic_io_request_construct_smp(0x%x) enter\n", 218 this_request 219 )); 220 221 this_request->protocol = SCIC_SMP_PROTOCOL; 222 this_request->has_started_substate_machine = TRUE; 223 224 // Construct the started sub-state machine. 225 sci_base_state_machine_construct( 226 &this_request->started_substate_machine, 227 &this_request->parent.parent, 228 scic_sds_smp_request_started_substate_table, 229 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE 230 ); 231 232 // Construct the SMP SCU Task Context 233 memcpy((char *)&smp_request, 234 this_request->command_buffer, 235 sizeof(SMP_REQUEST_T)); 236 237 // Look at the SMP requests' header fields; for certain SAS 1.x SMP 238 // functions under SAS 2.0, a zero request length really indicates 239 // a non-zero default length. 240 if( smp_request.header.request_length == 0 ) 241 { 242 switch( smp_request.header.function ) 243 { 244 case SMP_FUNCTION_DISCOVER: 245 case SMP_FUNCTION_REPORT_PHY_ERROR_LOG: 246 case SMP_FUNCTION_REPORT_PHY_SATA: 247 case SMP_FUNCTION_REPORT_ROUTE_INFORMATION: 248 smp_request.header.request_length = 2; 249 break; 250 case SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION: 251 case SMP_FUNCTION_PHY_CONTROL: 252 case SMP_FUNCTION_PHY_TEST: 253 smp_request.header.request_length = 9; 254 break; 255 // Default - zero is a valid default for 2.0. 256 } 257 } 258 259 scu_smp_request_construct_task_context( 260 this_request, 261 &smp_request 262 ); 263 264 sci_base_state_machine_change_state( 265 &this_request->parent.state_machine, 266 SCI_BASE_REQUEST_STATE_CONSTRUCTED 267 ); 268 269 return SCI_SUCCESS; 270 } 271 272 /** 273 * @brief This method is called by the SCI user to build an SMP pass-through 274 * IO request. 275 * 276 * @pre 277 * - The user must have previously called scic_io_request_construct() 278 * on the supplied IO request. 279 * 280 * @param[in] scic_smp_request This parameter specifies the handle to the 281 * io request object to be built. 282 * 283 * @param[in] passthru_cb This parameter specifies the pointer to the callback 284 * structure that contains the function pointers 285 * 286 * @return Indicate if the controller successfully built the IO request. 287 */ 288 SCI_STATUS scic_io_request_construct_smp_pass_through( 289 SCI_IO_REQUEST_HANDLE_T scic_smp_request, 290 SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS_T *passthru_cb 291 ) 292 { 293 SMP_REQUEST_T smp_request; 294 U8 * request_buffer; 295 U32 request_buffer_length_in_bytes; 296 297 SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *) scic_smp_request; 298 SCIC_LOG_TRACE(( 299 sci_base_object_get_logger(this_request), 300 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 301 "scic_io_request_construct_smp_pass_through(0x%x) enter\n", 302 this_request 303 )); 304 305 this_request->protocol = SCIC_SMP_PROTOCOL; 306 this_request->has_started_substate_machine = TRUE; 307 308 // Call the callback function to retrieve the SMP passthrough request 309 request_buffer_length_in_bytes = passthru_cb->scic_cb_smp_passthru_get_request ( 310 (void *)this_request, 311 &request_buffer 312 ); 313 314 //copy the request to smp request 315 memcpy((char *)&smp_request.request.vendor_specific_request, 316 request_buffer, 317 request_buffer_length_in_bytes); 318 319 //the header length in smp_request is in dwords - the sas spec has similar way, 320 //but the csmi header contains the number of bytes, so we need to convert the 321 //number of bytes to number of dwords 322 smp_request.header.request_length = (U8) (request_buffer_length_in_bytes / sizeof (U32)); 323 324 //Grab the other needed fields from the smp request using callbacks 325 smp_request.header.smp_frame_type = passthru_cb->scic_cb_smp_passthru_get_frame_type ((void *)this_request); 326 smp_request.header.function = passthru_cb->scic_cb_smp_passthru_get_function ((void *)this_request); 327 smp_request.header.allocated_response_length = passthru_cb->scic_cb_smp_passthru_get_allocated_response_length((void *)this_request); 328 329 // Construct the started sub-state machine. 330 sci_base_state_machine_construct( 331 &this_request->started_substate_machine, 332 &this_request->parent.parent, 333 scic_sds_smp_request_started_substate_table, 334 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE 335 ); 336 337 // Construct the SMP SCU Task Context 338 scu_smp_request_construct_task_context (this_request, &smp_request); 339 340 sci_base_state_machine_change_state( 341 &this_request->parent.state_machine, 342 SCI_BASE_REQUEST_STATE_CONSTRUCTED 343 ); 344 345 return SCI_SUCCESS; 346 } 347 348 /** 349 * @brief This method will fill in the SCU Task Context for a SMP request. The 350 * following important settings are utilized: 351 * 352 * -# task_type == SCU_TASK_TYPE_SMP. This simply indicates 353 * that a normal request type (i.e. non-raw frame) is being 354 * utilized to perform task management. 355 * -# control_frame == 1. This ensures that the proper endianess 356 * is set so that the bytes are transmitted in the right order 357 * for a smp request frame. 358 * 359 * @param[in] this_request This parameter specifies the smp request object 360 * being constructed. 361 * 362 * @return none 363 */ 364 void scu_smp_request_construct_task_context( 365 SCIC_SDS_REQUEST_T *this_request, 366 SMP_REQUEST_T *smp_request 367 ) 368 { 369 SCI_PHYSICAL_ADDRESS physical_address; 370 SCIC_SDS_CONTROLLER_T *owning_controller; 371 SCIC_SDS_REMOTE_DEVICE_T *target_device; 372 SCIC_SDS_PORT_T *target_port; 373 SCU_TASK_CONTEXT_T *task_context; 374 375 //byte swap the smp request. 376 scic_word_copy_with_swap( 377 this_request->command_buffer, 378 (U32*) smp_request, 379 sizeof(SMP_REQUEST_T)/sizeof(U32) 380 ); 381 382 task_context = scic_sds_request_get_task_context(this_request); 383 384 owning_controller = scic_sds_request_get_controller(this_request); 385 target_device = scic_sds_request_get_device(this_request); 386 target_port = scic_sds_request_get_port(this_request); 387 388 SCIC_LOG_TRACE(( 389 sci_base_object_get_logger(this_request), 390 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 391 "scu_smp_request_construct_task_context(0x%x) contents\n" 392 " reqlen=%x; function=%x;\n", 393 this_request, 394 smp_request->header.request_length, 395 smp_request->header.function 396 )); 397 398 // Fill in the TC with the its required data 399 // 00h 400 task_context->priority = 0; 401 task_context->initiator_request = 1; 402 task_context->connection_rate = 403 scic_remote_device_get_connection_rate(target_device); 404 task_context->protocol_engine_index = 405 scic_sds_controller_get_protocol_engine_group(owning_controller); 406 task_context->logical_port_index = 407 scic_sds_port_get_index(target_port); 408 task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; 409 task_context->abort = 0; 410 task_context->valid = SCU_TASK_CONTEXT_VALID; 411 task_context->context_type = SCU_TASK_CONTEXT_TYPE; 412 413 //04h 414 task_context->remote_node_index = this_request->target_device->rnc->remote_node_index; 415 task_context->command_code = 0; 416 task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; 417 418 //08h 419 task_context->link_layer_control = 0; 420 task_context->do_not_dma_ssp_good_response = 1; 421 task_context->strict_ordering = 0; 422 task_context->control_frame = 1; 423 task_context->timeout_enable = 0; 424 task_context->block_guard_enable = 0; 425 426 //0ch 427 task_context->address_modifier = 0; 428 429 //10h 430 task_context->ssp_command_iu_length = smp_request->header.request_length; 431 432 //14h 433 task_context->transfer_length_bytes = 0; 434 435 //18h ~ 30h, protocol specific 436 // since commandIU has been build by framework at this point, we just 437 // copy the frist DWord from command IU to this location. 438 memcpy((void *)(&task_context->type.smp), this_request->command_buffer, sizeof(U32) ); 439 440 //40h 441 // "For SMP you could program it to zero. We would prefer that way so that 442 // done code will be consistent." - Venki 443 task_context->task_phase = 0; 444 445 if (this_request->was_tag_assigned_by_user) 446 { 447 // Build the task context now since we have already read the data 448 this_request->post_context = ( 449 SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC 450 | ( 451 scic_sds_controller_get_protocol_engine_group(owning_controller) 452 << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 453 ) 454 | ( 455 scic_sds_port_get_index(target_port) 456 << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 457 ) 458 | scic_sds_io_tag_get_index(this_request->io_tag) 459 ); 460 } 461 else 462 { 463 // Build the task context now since we have already read the data 464 this_request->post_context = ( 465 SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC 466 | ( 467 scic_sds_controller_get_protocol_engine_group(owning_controller) 468 << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 469 ) 470 | ( 471 scic_sds_port_get_index(target_port) 472 << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 473 ) 474 // This is not assigned because we have to wait until we get a TCi 475 ); 476 } 477 478 // Copy the physical address for the command buffer to the SCU Task Context 479 // command buffer should not contain command header. 480 scic_cb_io_request_get_physical_address( 481 scic_sds_request_get_controller(this_request), 482 this_request, 483 ((char *)(this_request->command_buffer) + sizeof(U32)), 484 &physical_address 485 ); 486 487 task_context->command_iu_upper = 488 sci_cb_physical_address_upper(physical_address); 489 task_context->command_iu_lower = 490 sci_cb_physical_address_lower(physical_address); 491 492 493 //SMP response comes as UF, so no need to set response IU address. 494 task_context->response_iu_upper = 0; 495 task_context->response_iu_lower = 0; 496 } 497 498 //****************************************************************************** 499 //* SMP REQUEST STATE MACHINE 500 //****************************************************************************** 501 502 /** 503 * @brief This method processes an unsolicited frame while the SMP request is 504 * waiting for a response frame. It will copy the response data, release 505 * the unsolicited frame, and transition the request to the 506 * SCI_BASE_REQUEST_STATE_COMPLETED state. 507 * 508 * @param[in] this_request This parameter specifies the request for which 509 * the unsolicited frame was received. 510 * @param[in] frame_index This parameter indicates the unsolicited frame 511 * index that should contain the response. 512 * 513 * @return This method returns an indication of whether the response 514 * frame was handled successfully or not. 515 * @retval SCI_SUCCESS Currently this value is always returned and indicates 516 * successful processing of the TC response. 517 */ 518 static 519 SCI_STATUS scic_sds_smp_request_await_response_frame_handler( 520 SCIC_SDS_REQUEST_T * this_request, 521 U32 frame_index 522 ) 523 { 524 SCI_STATUS status; 525 void * frame_header; 526 SMP_RESPONSE_HEADER_T * this_frame_header; 527 U8 * user_smp_buffer = this_request->response_buffer; 528 529 // Save off the controller, so that we do not touch the request after it 530 // is completed. 531 SCIC_SDS_CONTROLLER_T * controller = scic_sds_request_get_controller(this_request); 532 533 SCIC_LOG_TRACE(( 534 sci_base_object_get_logger(this_request), 535 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 536 "scic_sds_smp_request_await_response_frame_handler(0x%x, 0x%x) enter\n", 537 this_request, frame_index 538 )); 539 540 status = scic_sds_unsolicited_frame_control_get_header( 541 &(controller->uf_control), 542 frame_index, 543 &frame_header 544 ); 545 546 //byte swap the header. 547 scic_word_copy_with_swap( 548 (U32*) user_smp_buffer, 549 frame_header, 550 sizeof(SMP_RESPONSE_HEADER_T)/sizeof(U32) 551 ); 552 this_frame_header = (SMP_RESPONSE_HEADER_T*) user_smp_buffer; 553 554 if (this_frame_header->smp_frame_type == SMP_FRAME_TYPE_RESPONSE) 555 { 556 void * smp_response_buffer; 557 558 status = scic_sds_unsolicited_frame_control_get_buffer( 559 &(controller->uf_control), 560 frame_index, 561 &smp_response_buffer 562 ); 563 564 scic_word_copy_with_swap( 565 (U32*) (user_smp_buffer + sizeof(SMP_RESPONSE_HEADER_T)), 566 smp_response_buffer, 567 sizeof(SMP_RESPONSE_BODY_T)/sizeof(U32) 568 ); 569 if (this_frame_header->function == SMP_FUNCTION_DISCOVER) 570 { 571 SMP_RESPONSE_T * this_smp_response; 572 573 this_smp_response = (SMP_RESPONSE_T *)user_smp_buffer; 574 575 // Some expanders only report an attached SATA device, and 576 // not an STP target. Since the core depends on the STP 577 // target attribute to correctly build I/O, set the bit now 578 // if necessary. 579 if (this_smp_response->response.discover.protocols.u.bits.attached_sata_device 580 && !this_smp_response->response.discover.protocols.u.bits.attached_stp_target) 581 { 582 this_smp_response->response.discover.protocols.u.bits.attached_stp_target = 1; 583 584 SCIC_LOG_TRACE(( 585 sci_base_object_get_logger(this_request), 586 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 587 "scic_sds_smp_request_await_response_frame_handler(0x%x) Found SATA dev, setting STP bit.\n", 588 this_request 589 )); 590 } 591 } 592 593 //Don't need to copy to user space. User instead will refer to 594 //core request's response buffer. 595 596 //copy the smp response to framework smp request's response buffer. 597 //scic_sds_smp_request_copy_response(this_request); 598 599 scic_sds_request_set_status( 600 this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS 601 ); 602 603 sci_base_state_machine_change_state( 604 &this_request->started_substate_machine, 605 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION 606 ); 607 } 608 else 609 { 610 // This was not a response frame why did it get forwarded? 611 SCIC_LOG_ERROR(( 612 sci_base_object_get_logger(this_request), 613 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 614 "SCIC SMP Request 0x%08x received unexpected frame %d type 0x%02x\n", 615 this_request, frame_index, this_frame_header->smp_frame_type 616 )); 617 618 scic_sds_request_set_status( 619 this_request, 620 SCU_TASK_DONE_SMP_FRM_TYPE_ERR, 621 SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR 622 ); 623 624 sci_base_state_machine_change_state( 625 &this_request->parent.state_machine, 626 SCI_BASE_REQUEST_STATE_COMPLETED 627 ); 628 } 629 630 scic_sds_controller_release_frame( 631 controller, frame_index 632 ); 633 634 return SCI_SUCCESS; 635 } 636 637 638 /** 639 * @brief This method processes an abnormal TC completion while the SMP 640 * request is waiting for a response frame. It decides what 641 * happened to the IO based on TC completion status. 642 * 643 * @param[in] this_request This parameter specifies the request for which 644 * the TC completion was received. 645 * @param[in] completion_code This parameter indicates the completion status 646 * information for the TC. 647 * 648 * @return Indicate if the tc completion handler was successful. 649 * @retval SCI_SUCCESS currently this method always returns success. 650 */ 651 static 652 SCI_STATUS scic_sds_smp_request_await_response_tc_completion_handler( 653 SCIC_SDS_REQUEST_T * this_request, 654 U32 completion_code 655 ) 656 { 657 SCIC_LOG_TRACE(( 658 sci_base_object_get_logger(this_request), 659 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 660 "scic_sds_smp_request_await_response_tc_completion_handler(0x%x, 0x%x) enter\n", 661 this_request, completion_code 662 )); 663 664 switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) 665 { 666 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): 667 //In the AWAIT RESPONSE state, any TC completion is unexpected. 668 //but if the TC has success status, we complete the IO anyway. 669 scic_sds_request_set_status( 670 this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS 671 ); 672 673 sci_base_state_machine_change_state( 674 &this_request->parent.state_machine, 675 SCI_BASE_REQUEST_STATE_COMPLETED 676 ); 677 break; 678 679 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): 680 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): 681 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): 682 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): 683 //These status has been seen in a specific LSI expander, which sometimes 684 //is not able to send smp response within 2 ms. This causes our hardware 685 //break the connection and set TC completion with one of these SMP_XXX_XX_ERR 686 //status. For these type of error, we ask scic user to retry the request. 687 scic_sds_request_set_status( 688 this_request, SCU_TASK_DONE_SMP_RESP_TO_ERR, SCI_FAILURE_RETRY_REQUIRED 689 ); 690 691 sci_base_state_machine_change_state( 692 &this_request->parent.state_machine, 693 SCI_BASE_REQUEST_STATE_COMPLETED 694 ); 695 break; 696 697 default: 698 // All other completion status cause the IO to be complete. If a NAK 699 // was received, then it is up to the user to retry the request. 700 scic_sds_request_set_status( 701 this_request, 702 SCU_NORMALIZE_COMPLETION_STATUS(completion_code), 703 SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR 704 ); 705 706 sci_base_state_machine_change_state( 707 &this_request->parent.state_machine, 708 SCI_BASE_REQUEST_STATE_COMPLETED 709 ); 710 break; 711 } 712 713 return SCI_SUCCESS; 714 } 715 716 717 /** 718 * @brief This method processes the completions transport layer (TL) status 719 * to determine if the SMP request was sent successfully. If the SMP 720 * request was sent successfully, then the state for the SMP request 721 * transits to waiting for a response frame. 722 * 723 * @param[in] this_request This parameter specifies the request for which 724 * the TC completion was received. 725 * @param[in] completion_code This parameter indicates the completion status 726 * information for the TC. 727 * 728 * @return Indicate if the tc completion handler was successful. 729 * @retval SCI_SUCCESS currently this method always returns success. 730 */ 731 static 732 SCI_STATUS scic_sds_smp_request_await_tc_completion_tc_completion_handler( 733 SCIC_SDS_REQUEST_T * this_request, 734 U32 completion_code 735 ) 736 { 737 SCIC_LOG_TRACE(( 738 sci_base_object_get_logger(this_request), 739 SCIC_LOG_OBJECT_SMP_IO_REQUEST, 740 "scic_sds_smp_request_await_tc_completion_tc_completion_handler(0x%x, 0x%x) enter\n", 741 this_request, completion_code 742 )); 743 744 switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) 745 { 746 case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): 747 scic_sds_request_set_status( 748 this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS 749 ); 750 751 sci_base_state_machine_change_state( 752 &this_request->parent.state_machine, 753 SCI_BASE_REQUEST_STATE_COMPLETED 754 ); 755 break; 756 757 default: 758 // All other completion status cause the IO to be complete. If a NAK 759 // was received, then it is up to the user to retry the request. 760 scic_sds_request_set_status( 761 this_request, 762 SCU_NORMALIZE_COMPLETION_STATUS(completion_code), 763 SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR 764 ); 765 766 sci_base_state_machine_change_state( 767 &this_request->parent.state_machine, 768 SCI_BASE_REQUEST_STATE_COMPLETED 769 ); 770 break; 771 } 772 773 return SCI_SUCCESS; 774 } 775 776 777 SCIC_SDS_IO_REQUEST_STATE_HANDLER_T 778 scic_sds_smp_request_started_substate_handler_table 779 [SCIC_SDS_SMP_REQUEST_STARTED_MAX_SUBSTATES] = 780 { 781 // SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE 782 { 783 { 784 scic_sds_request_default_start_handler, 785 scic_sds_request_started_state_abort_handler, 786 scic_sds_request_default_complete_handler, 787 scic_sds_request_default_destruct_handler 788 }, 789 scic_sds_smp_request_await_response_tc_completion_handler, 790 scic_sds_request_default_event_handler, 791 scic_sds_smp_request_await_response_frame_handler 792 }, 793 // SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION 794 { 795 { 796 scic_sds_request_default_start_handler, 797 scic_sds_request_started_state_abort_handler, 798 scic_sds_request_default_complete_handler, 799 scic_sds_request_default_destruct_handler 800 }, 801 scic_sds_smp_request_await_tc_completion_tc_completion_handler, 802 scic_sds_request_default_event_handler, 803 scic_sds_request_default_frame_handler 804 } 805 }; 806 807 /** 808 * @brief This method performs the actions required when entering the 809 * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_RESPONSE sub-state. 810 * This includes setting the IO request state handlers for this 811 * sub-state. 812 * 813 * @param[in] object This parameter specifies the request object for which 814 * the sub-state change is occuring. 815 * 816 * @return none. 817 */ 818 static 819 void scic_sds_smp_request_started_await_response_substate_enter( 820 SCI_BASE_OBJECT_T *object 821 ) 822 { 823 SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object; 824 825 SET_STATE_HANDLER( 826 this_request, 827 scic_sds_smp_request_started_substate_handler_table, 828 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE 829 ); 830 } 831 832 /** 833 * @brief This method performs the actions required when entering the 834 * SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION 835 * sub-state. This includes setting the SMP request state handlers for 836 * this sub-state. 837 * 838 * @param[in] object This parameter specifies the request object for which 839 * the sub-state change is occuring. 840 * 841 * @return none. 842 */ 843 static 844 void scic_sds_smp_request_started_await_tc_completion_substate_enter( 845 SCI_BASE_OBJECT_T *object 846 ) 847 { 848 SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object; 849 850 SET_STATE_HANDLER( 851 this_request, 852 scic_sds_smp_request_started_substate_handler_table, 853 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION 854 ); 855 } 856 857 SCI_BASE_STATE_T scic_sds_smp_request_started_substate_table 858 [SCIC_SDS_SMP_REQUEST_STARTED_MAX_SUBSTATES] = 859 { 860 { 861 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_RESPONSE, 862 scic_sds_smp_request_started_await_response_substate_enter, 863 NULL 864 }, 865 { 866 SCIC_SDS_SMP_REQUEST_STARTED_SUBSTATE_AWAIT_TC_COMPLETION, 867 scic_sds_smp_request_started_await_tc_completion_substate_enter, 868 NULL 869 } 870 }; 871 872 873