xref: /freebsd/sys/dev/isci/scil/scic_sds_remote_node_table.h (revision 02e9120893770924227138ba49df1edb3896112a)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0
3  *
4  * This file is provided under a dual BSD/GPLv2 license.  When using or
5  * redistributing this file, you may do so under either license.
6  *
7  * GPL LICENSE SUMMARY
8  *
9  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of version 2 of the GNU General Public License as
13  * published by the Free Software Foundation.
14  *
15  * This program is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
23  * The full GNU General Public License is included in this distribution
24  * in the file called LICENSE.GPL.
25  *
26  * BSD LICENSE
27  *
28  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
29  * All rights reserved.
30  *
31  * Redistribution and use in source and binary forms, with or without
32  * modification, are permitted provided that the following conditions
33  * are met:
34  *
35  *   * Redistributions of source code must retain the above copyright
36  *     notice, this list of conditions and the following disclaimer.
37  *   * Redistributions in binary form must reproduce the above copyright
38  *     notice, this list of conditions and the following disclaimer in
39  *     the documentation and/or other materials provided with the
40  *     distribution.
41  *
42  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
43  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
44  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
45  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
46  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
47  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
48  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
49  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
50  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
51  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
52  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
53  */
54 #ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_
55 #define _SCIC_SDS_REMOTE_NODE_TABLE_H_
56 
57 /**
58  * @file
59  *
60  * @brief This file contains the structures, constants and prototypes used for
61  *        the remote node table.
62  */
63 
64 #ifdef __cplusplus
65 extern "C" {
66 #endif // __cplusplus
67 
68 #include <dev/isci/scil/sci_types.h>
69 #include <dev/isci/scil/sci_controller_constants.h>
70 
71 /**
72  * Remote node sets are sets of remote node index in the remtoe node table
73  * The SCU hardware requires that STP remote node entries take three
74  * consecutive remote node index so the table is arranged in sets of three.
75  * The bits are used as 0111 0111 to make a byte and the bits define the set
76  * of three remote nodes to use as a sequence.
77  */
78 #define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2
79 
80 /**
81  * Since the remote node table is organized as DWORDS take the remote node
82  * sets in bytes and represent them in DWORDs. The lowest ordered bits are the
83  * ones used in case full DWORD is not being used.
84  *
85  * i.e. 0000 0000 0000 0000 0111 0111 0111 0111 // if only a single WORD is in
86  * use in the DWORD.
87  */
88 #define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \
89    (sizeof(U32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE)
90 /**
91  * This is a count of the numeber of remote nodes that can be represented in
92  * a byte
93  */
94 #define SCIC_SDS_REMOTE_NODES_PER_BYTE  \
95    (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE)
96 
97 /**
98  * This is a count of the number of remote nodes that can be represented in a
99  * DWROD
100  */
101 #define SCIC_SDS_REMOTE_NODES_PER_DWORD \
102    (sizeof(U32) * SCIC_SDS_REMOTE_NODES_PER_BYTE)
103 
104 /**
105  * This is the number of bits in a remote node group
106  */
107 #define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP   4
108 
109 #define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX      (0xFFFFFFFF)
110 #define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE    (0x07)
111 #define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE   (0x00)
112 
113 /**
114  * Expander attached sata remote node count
115  */
116 #define SCU_STP_REMOTE_NODE_COUNT        3
117 
118 /**
119  * Expander or direct attached ssp remote node count
120  */
121 #define SCU_SSP_REMOTE_NODE_COUNT        1
122 
123 /**
124  * Direct attached STP remote node count
125  */
126 #define SCU_SATA_REMOTE_NODE_COUNT       1
127 
128 /**
129  * @struct SCIC_REMOTE_NODE_TABLE
130  */
131 typedef struct SCIC_REMOTE_NODE_TABLE
132 {
133    /**
134     * This field contains the array size in dwords
135     */
136    U16 available_nodes_array_size;
137 
138    /**
139     * This field contains the array size of the
140     */
141    U16 group_array_size;
142 
143    /**
144     * This field is the array of available remote node entries in bits.
145     * Because of the way STP remote node data is allocated on the SCU hardware
146     * the remote nodes must occupy three consecutive remote node context
147     * entries.  For ease of allocation and de-allocation we have broken the
148     * sets of three into a single nibble.  When the STP RNi is allocated all
149     * of the bits in the nibble are cleared.  This math results in a table size
150     * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte.
151     */
152    U32 available_remote_nodes[
153         (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD)
154       + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)];
155 
156    /**
157     * This field is the nibble selector for the above table.  There are three
158     * possible selectors each for fast lookup when trying to find one, two or
159     * three remote node entries.
160     */
161    U32 remote_node_groups[
162       SCU_STP_REMOTE_NODE_COUNT][
163            (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT))
164          + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)];
165 
166 } SCIC_REMOTE_NODE_TABLE_T;
167 
168 // ---------------------------------------------------------------------------
169 
170 void scic_sds_remote_node_table_initialize(
171    SCIC_REMOTE_NODE_TABLE_T * remote_node_table,
172    U32                        remote_node_entries
173 );
174 
175 U16 scic_sds_remote_node_table_allocate_remote_node(
176    SCIC_REMOTE_NODE_TABLE_T * remote_node_table,
177    U32                        remote_node_count
178 );
179 
180 void scic_sds_remote_node_table_release_remote_node_index(
181    SCIC_REMOTE_NODE_TABLE_T * remote_node_table,
182    U32                        remote_node_count,
183    U16                        remote_node_index
184 );
185 
186 #ifdef __cplusplus
187 }
188 #endif // __cplusplus
189 
190 #endif // _SCIC_SDS_REMOTE_NODE_TABLE_H_
191