1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 * 52 * $FreeBSD$ 53 */ 54 #ifndef _SCIC_PORT_H_ 55 #define _SCIC_PORT_H_ 56 57 /** 58 * @file 59 * 60 * @brief This file contains all of the interface methods that can be called 61 * by an SCI Core user on a SAS or SATA port. 62 */ 63 64 #ifdef __cplusplus 65 extern "C" { 66 #endif // __cplusplus 67 68 #include <dev/isci/scil/sci_types.h> 69 #include <dev/isci/scil/sci_status.h> 70 #include <dev/isci/scil/intel_sas.h> 71 72 enum SCIC_PORT_NOT_READY_REASON_CODE 73 { 74 SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, 75 SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, 76 SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, 77 SCIC_PORT_NOT_READY_RECONFIGURING, 78 79 SCIC_PORT_NOT_READY_REASON_CODE_MAX 80 }; 81 82 /** 83 * @struct SCIC_PORT_END_POINT_PROPERTIES 84 * @brief This structure defines the properties that can be retrieved 85 * for each end-point local or remote (attached) port in the 86 * controller. 87 */ 88 typedef struct SCIC_PORT_END_POINT_PROPERTIES 89 { 90 /** 91 * This field indicates the SAS address for the associated end 92 * point in the port. 93 */ 94 SCI_SAS_ADDRESS_T sas_address; 95 96 /** 97 * This field indicates the protocols supported by the associated 98 * end-point in the port. 99 */ 100 SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS_T protocols; 101 102 } SCIC_PORT_END_POINT_PROPERTIES_T; 103 104 /** 105 * @struct SCIC_PORT_PROPERTIES 106 * @brief This structure defines the properties that can be retrieved 107 * for each port in the controller. 108 */ 109 typedef struct SCIC_PORT_PROPERTIES 110 { 111 /** 112 * This field specifies the logical index of the port (0 relative). 113 */ 114 U32 index; 115 116 /** 117 * This field indicates the local end-point properties for port. 118 */ 119 SCIC_PORT_END_POINT_PROPERTIES_T local; 120 121 /** 122 * This field indicates the remote (attached) end-point properties 123 * for the port. 124 */ 125 SCIC_PORT_END_POINT_PROPERTIES_T remote; 126 127 /** 128 * This field specifies the phys contained inside the port. 129 */ 130 U32 phy_mask; 131 132 } SCIC_PORT_PROPERTIES_T; 133 134 /** 135 * @brief This method simply returns the properties regarding the 136 * port, such as: physical index, protocols, sas address, etc. 137 * 138 * @param[in] port this parameter specifies the port for which to retrieve 139 * the physical index. 140 * @param[out] properties This parameter specifies the properties 141 * structure into which to copy the requested information. 142 * 143 * @return Indicate if the user specified a valid port. 144 * @retval SCI_SUCCESS This value is returned if the specified port was valid. 145 * @retval SCI_FAILURE_INVALID_PORT This value is returned if the specified port 146 * is not valid. When this value is returned, no data is copied to the 147 * properties output parameter. 148 */ 149 SCI_STATUS scic_port_get_properties( 150 SCI_PORT_HANDLE_T port, 151 SCIC_PORT_PROPERTIES_T * properties 152 ); 153 154 /** 155 * @brief This method will add a phy to an existing port. 156 * 157 * @param[in] port This parameter specifies the port in which to add a new 158 * phy. 159 * @param[in] phy This parameter specifies the phy to be added to the port. 160 * 161 * @return Indicate if the phy was successfully added to the port. 162 * @retval SCI_SUCCESS This value is returned if the phy was successfully 163 * added to the port. 164 * @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied 165 * port is not valid. 166 * @retval SCI_FAILURE_INVALID_PHY This value is returned if the supplied 167 * phy is either invalid or already contained in another port. 168 */ 169 SCI_STATUS scic_port_add_phy( 170 SCI_PORT_HANDLE_T port, 171 SCI_PHY_HANDLE_T phy 172 ); 173 174 /** 175 * @brief This method will remove a phy from an existing port. 176 * 177 * @param[in] port This parameter specifies the port in which to remove a 178 * phy. 179 * @param[in] phy This parameter specifies the phy to be removed from the 180 * port. 181 * 182 * @return Indicate if the phy was successfully removed from the port. 183 * @retval SCI_SUCCESS This value is returned if the phy was successfully 184 * removed from the port. 185 * @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied 186 * port is not valid. 187 * @retval SCI_FAILURE_INVALID_PHY This value is returned if the supplied 188 * phy is either invalid or 189 * not contained in the port. 190 */ 191 SCI_STATUS scic_port_remove_phy( 192 SCI_PORT_HANDLE_T port, 193 SCI_PHY_HANDLE_T phy 194 ); 195 196 /** 197 * @brief This method will request the SCI implementation to perform a 198 * HARD RESET on the SAS Port. If/When the HARD RESET completes 199 * the SCI user will be notified via an SCI OS callback indicating 200 * a direct attached device was found. 201 * 202 * @note The SCI User callback in SCIC_USER_CALLBACKS_T will only be called 203 * once for each phy in the SAS Port at completion of the hard reset 204 * sequence. 205 * 206 * @param[in] port a handle corresponding to the SAS port to be 207 * hard reset. 208 * @param[in] reset_timeout This parameter specifies the number of 209 * milliseconds in which the port reset operation should complete. 210 * 211 * @return Return a status indicating whether the hard reset started 212 * successfully. 213 * @retval SCI_SUCCESS This value is returned if the hard reset operation 214 * started successfully. 215 */ 216 SCI_STATUS scic_port_hard_reset( 217 SCI_PORT_HANDLE_T port, 218 U32 reset_timeout 219 ); 220 221 /** 222 * @brief This API method enables the broadcast change notification from 223 * underneath hardware. 224 * 225 * @param[in] port The port upon which broadcast change notifications 226 * (BCN) are to be enabled. 227 * 228 * @return none 229 */ 230 void scic_port_enable_broadcast_change_notification( 231 SCI_PORT_HANDLE_T port 232 ); 233 234 #ifdef __cplusplus 235 } 236 #endif // __cplusplus 237 238 #endif // _SCIC_PORT_H_ 239 240