1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 */ 52 53 #include <sys/cdefs.h> 54 __FBSDID("$FreeBSD$"); 55 56 /** 57 * @file 58 * @brief This file contains the method implementations for translating 59 * the SCSI VERIFY (10, 12, 16-byte) commands. 60 */ 61 62 #if !defined(DISABLE_SATI_VERIFY) 63 64 #include <dev/isci/scil/sati_verify.h> 65 #include <dev/isci/scil/sati_callbacks.h> 66 #include <dev/isci/scil/sati_util.h> 67 #include <dev/isci/scil/sati_move.h> 68 69 #include <dev/isci/scil/intel_ata.h> 70 #include <dev/isci/scil/intel_scsi.h> 71 #include <dev/isci/scil/intel_sat.h> 72 73 //****************************************************************************** 74 //* P R I V A T E M E T H O D S 75 //****************************************************************************** 76 77 /** 78 * @brief This method performs the SCSI VERIFY command translation 79 * functionality common to all VERIFY command sizes. 80 * This includes: 81 * - setting the command register 82 * - setting the device head register 83 * - filling in fields in the SATI_TRANSLATOR_SEQUENCE object. 84 * For more information on the parameters passed to this method, 85 * please reference sati_translate_command(). 86 * 87 * @return Indicate if the method was successfully completed. 88 * @retval SATI_SUCCESS This is returned in all other cases. 89 */ 90 static 91 SATI_STATUS sati_verify_translate_command( 92 SATI_TRANSLATOR_SEQUENCE_T * sequence, 93 void * scsi_io, 94 void * ata_io 95 ) 96 { 97 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 98 U8 * register_fis = sati_cb_get_h2d_register_fis_address(ata_io); 99 100 /** 101 * The translator doesn't support performing the byte check operation. 102 * As a result, error the request if the BYTCHK bit is set. 103 */ 104 if ((sati_get_cdb_byte(cdb, 1) & SCSI_VERIFY_BYTCHK_ENABLED)) 105 { 106 sati_scsi_sense_data_construct( 107 sequence, 108 scsi_io, 109 SCSI_STATUS_CHECK_CONDITION, 110 SCSI_SENSE_ILLEGAL_REQUEST, 111 SCSI_ASC_INVALID_FIELD_IN_CDB, 112 SCSI_ASCQ_INVALID_FIELD_IN_CDB 113 ); 114 return SATI_FAILURE_CHECK_RESPONSE_DATA; 115 } 116 117 sequence->protocol = SAT_PROTOCOL_NON_DATA; 118 sequence->data_direction = SATI_DATA_DIRECTION_NONE; 119 120 sati_set_ata_device_head(register_fis, ATA_DEV_HEAD_REG_LBA_MODE_ENABLE); 121 122 // Ensure the device supports the 48 bit feature set. 123 if (sequence->device->capabilities & SATI_DEVICE_CAP_48BIT_ENABLE) 124 sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS_EXT); 125 else 126 sati_set_ata_command(register_fis, ATA_READ_VERIFY_SECTORS); 127 128 return SATI_SUCCESS; 129 } 130 131 //****************************************************************************** 132 //* P U B L I C M E T H O D S 133 //****************************************************************************** 134 135 /** 136 * @brief This method performs all of the translation required for a 137 * SCSI VERIFY 10 byte CDB. 138 * This includes: 139 * - logical block address translation 140 * - transfer length (sector count) translation 141 * - translation items common to all VERIFY CDB sizes. 142 * For more information on the parameters passed to this method, 143 * please reference sati_translate_command(). 144 * 145 * @return Indicate if the command translation was successful. 146 * For more information on return values please reference 147 * sati_move_set_sector_count(), sati_verify_translate_command() 148 */ 149 SATI_STATUS sati_verify_10_translate_command( 150 SATI_TRANSLATOR_SEQUENCE_T * sequence, 151 void * scsi_io, 152 void * ata_io 153 ) 154 { 155 SATI_STATUS status; 156 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 157 U32 sector_count = (sati_get_cdb_byte(cdb, 7) << 8) | 158 (sati_get_cdb_byte(cdb, 8)); 159 160 if(sati_device_state_stopped(sequence, scsi_io)) 161 { 162 return SATI_FAILURE_CHECK_RESPONSE_DATA; 163 } 164 else 165 { 166 sequence->type = SATI_SEQUENCE_VERIFY_10; 167 168 // Fill in the Logical Block Address fields and sector count registers. 169 sati_move_translate_32_bit_lba(sequence, scsi_io, ata_io); 170 status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); 171 if (status != SATI_SUCCESS) 172 return status; 173 174 return sati_verify_translate_command(sequence, scsi_io, ata_io); 175 } 176 } 177 178 /** 179 * @brief This method performs all of the translation required for a 180 * SCSI VERIFY 12 byte CDB. 181 * This includes: 182 * - logical block address translation 183 * - transfer length (sector count) translation 184 * - translation items common to all VERIFY CDB sizes. 185 * For more information on the parameters passed to this method, 186 * please reference sati_translate_command(). 187 * 188 * @return Indicate if the command translation was successful. 189 * For more information on return values please reference 190 * sati_move_set_sector_count(), sati_verify_translate_command() 191 */ 192 SATI_STATUS sati_verify_12_translate_command( 193 SATI_TRANSLATOR_SEQUENCE_T * sequence, 194 void * scsi_io, 195 void * ata_io 196 ) 197 { 198 SATI_STATUS status; 199 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 200 U32 sector_count = (sati_get_cdb_byte(cdb, 6) << 24) | 201 (sati_get_cdb_byte(cdb, 7) << 16) | 202 (sati_get_cdb_byte(cdb, 8) << 8) | 203 (sati_get_cdb_byte(cdb, 9)); 204 205 if(sati_device_state_stopped(sequence, scsi_io)) 206 { 207 return SATI_FAILURE_CHECK_RESPONSE_DATA; 208 } 209 else 210 { 211 sequence->type = SATI_SEQUENCE_VERIFY_12; 212 213 // Fill in the Logical Block Address fields and sector count registers. 214 sati_move_translate_32_bit_lba(sequence, scsi_io, ata_io); 215 status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); 216 if (status != SATI_SUCCESS) 217 return status; 218 219 return sati_verify_translate_command(sequence, scsi_io, ata_io); 220 } 221 } 222 223 /** 224 * @brief This method performs all of the translation required for a 225 * SCSI VERIFY 16 byte CDB. 226 * This includes: 227 * - logical block address translation 228 * - transfer length (sector count) translation 229 * - translation items common to all VERIFY CDB sizes. 230 * For more information on the parameters passed to this method, 231 * please reference sati_translate_command(). 232 * 233 * @return Indicate if the command translation was successful. 234 * For more information on return values please reference 235 * sati_move_set_sector_count(), sati_verify_translate_command() 236 */ 237 SATI_STATUS sati_verify_16_translate_command( 238 SATI_TRANSLATOR_SEQUENCE_T * sequence, 239 void * scsi_io, 240 void * ata_io 241 ) 242 { 243 SATI_STATUS status; 244 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 245 U32 sector_count = (sati_get_cdb_byte(cdb, 10) << 24) | 246 (sati_get_cdb_byte(cdb, 11) << 16) | 247 (sati_get_cdb_byte(cdb, 12) << 8) | 248 (sati_get_cdb_byte(cdb, 13)); 249 250 if(sati_device_state_stopped(sequence, scsi_io)) 251 { 252 return SATI_FAILURE_CHECK_RESPONSE_DATA; 253 } 254 else 255 { 256 sequence->type = SATI_SEQUENCE_VERIFY_16; 257 258 // Fill in the Logical Block Address field. 259 status = sati_move_translate_64_bit_lba(sequence, scsi_io, ata_io); 260 if (status != SATI_SUCCESS) 261 return status; 262 263 // Fill in the Sector Count fields. 264 status = sati_move_set_sector_count(sequence,scsi_io,ata_io,sector_count,0); 265 if (status != SATI_SUCCESS) 266 return status; 267 268 return sati_verify_translate_command(sequence, scsi_io, ata_io); 269 } 270 } 271 272 #endif // !defined(DISABLE_SATI_VERIFY) 273 274