1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 23 * The full GNU General Public License is included in this distribution 24 * in the file called LICENSE.GPL. 25 * 26 * BSD LICENSE 27 * 28 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 43 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 44 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 45 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 46 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 47 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 48 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 */ 54 55 #include <sys/cdefs.h> 56 /** 57 * @file 58 * @brief This file contains the method implementations required to 59 * translate the SCSI test unit ready command. 60 */ 61 62 #if !defined(DISABLE_SATI_TEST_UNIT_READY) 63 64 #include <dev/isci/scil/sati_test_unit_ready.h> 65 #include <dev/isci/scil/sati_util.h> 66 #include <dev/isci/scil/sati_callbacks.h> 67 #include <dev/isci/scil/intel_ata.h> 68 #include <dev/isci/scil/intel_scsi.h> 69 70 /** 71 * @brief This method will translate the test unit ready SCSI command into 72 * an ATA CHECK POWER MODE command. 73 * For more information on the parameters passed to this method, 74 * please reference sati_translate_command(). 75 * 76 * @return Indicate if the command translation succeeded. 77 * @retval SCI_SUCCESS This is returned if the command translation was 78 * successful. 79 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if the 80 * LBA field is not 0, the PMI bit is not 0. 81 */ 82 SATI_STATUS sati_test_unit_ready_translate_command( 83 SATI_TRANSLATOR_SEQUENCE_T * sequence, 84 void * scsi_io, 85 void * ata_io 86 ) 87 { 88 /** 89 * SAT dictates: 90 * - the device should be in a state to receive commands 91 * - a stopped device should cause sense data. 92 * - a format unit in progresss should cause sense data. 93 * - a self-test in progress should cause sense data. 94 * - a device fault occurred on previous request should cause sense data. 95 * - handling the removable media feature set isn't supported according to 96 * SAT specifications. 97 */ 98 if (sequence->device->state == SATI_DEVICE_STATE_STOPPED) 99 { 100 sati_scsi_sense_data_construct( 101 sequence, 102 scsi_io, 103 SCSI_STATUS_CHECK_CONDITION, 104 SCSI_SENSE_NOT_READY, 105 SCSI_ASC_INITIALIZING_COMMAND_REQUIRED, 106 SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 107 ); 108 return SATI_FAILURE_CHECK_RESPONSE_DATA; 109 } 110 else if (sequence->device->state 111 == SATI_DEVICE_STATE_SELF_TEST_IN_PROGRESS) 112 { 113 sati_scsi_sense_data_construct( 114 sequence, 115 scsi_io, 116 SCSI_STATUS_CHECK_CONDITION, 117 SCSI_SENSE_NOT_READY, 118 SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS, 119 SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 120 ); 121 return SATI_FAILURE_CHECK_RESPONSE_DATA; 122 } 123 else if (sequence->device->state 124 == SATI_DEVICE_STATE_FORMAT_UNIT_IN_PROGRESS) 125 { 126 sati_scsi_sense_data_construct( 127 sequence, 128 scsi_io, 129 SCSI_STATUS_CHECK_CONDITION, 130 SCSI_SENSE_NOT_READY, 131 SCSI_ASC_LUN_FORMAT_IN_PROGRESS, 132 SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 133 ); 134 return SATI_FAILURE_CHECK_RESPONSE_DATA; 135 } 136 137 // The CDB is properly formed and the device is ready. 138 sequence->type = SATI_SEQUENCE_TEST_UNIT_READY; 139 140 sati_ata_check_power_mode_construct(ata_io, sequence); 141 return SATI_SUCCESS; 142 } 143 144 /** 145 * @brief This method will translate the ATA CHECK POWER MODE register FIS 146 * response into an appropriate SCSI response. 147 * For more information on the parameters passed to this method, 148 * please reference sati_translate_response(). 149 * 150 * @return Indicate if the response translation succeeded. 151 * @retval SCI_SUCCESS This is returned if the data translation was 152 * successful. 153 */ 154 SATI_STATUS sati_test_unit_ready_translate_response( 155 SATI_TRANSLATOR_SEQUENCE_T * sequence, 156 void * scsi_io, 157 void * ata_io 158 ) 159 { 160 U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io); 161 162 /** 163 * SAT dictates: 164 * - If the ATA CHECK POWER MODE command returns an error, then 165 * return sense data indicating the LOGICAL UNIT DOES NOT RESPONSE 166 * TO SELECTION. 167 * - All other cases are considered successful. 168 */ 169 if (sati_get_ata_status(register_fis) & ATA_STATUS_REG_ERROR_BIT) 170 { 171 sati_scsi_sense_data_construct( 172 sequence, 173 scsi_io, 174 SCSI_STATUS_CHECK_CONDITION, 175 SCSI_SENSE_NOT_READY, 176 SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION, 177 SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 178 ); 179 return SATI_FAILURE_CHECK_RESPONSE_DATA; 180 } 181 182 return SATI_COMPLETE; 183 } 184 185 #endif // !defined(DISABLE_SATI_TEST_UNIT_READY) 186 187