1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 */ 52 53 #include <sys/cdefs.h> 54 __FBSDID("$FreeBSD$"); 55 56 /** 57 * @file 58 * @brief This file contains the method implementations required to 59 * translate the SCSI read capacity (10 byte) command. 60 */ 61 62 #if !defined(DISABLE_SATI_READ_CAPACITY) 63 64 #include <dev/isci/scil/sati_read_capacity.h> 65 #include <dev/isci/scil/sati_callbacks.h> 66 #include <dev/isci/scil/sati_util.h> 67 #include <dev/isci/scil/intel_ata.h> 68 #include <dev/isci/scil/intel_scsi.h> 69 70 /** 71 * @brief This method will translate the read capacity 10 SCSI command into 72 * an ATA IDENTIFY DEVICE command. 73 * For more information on the parameters passed to this method, 74 * please reference sati_translate_command(). 75 * 76 * @return Indicate if the command translation succeeded. 77 * @retval SCI_SUCCESS This is returned if the command translation was 78 * successful. 79 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if the 80 * LBA field is not 0, the PMI bit is not 0. 81 */ 82 SATI_STATUS sati_read_capacity_10_translate_command( 83 SATI_TRANSLATOR_SEQUENCE_T * sequence, 84 void * scsi_io, 85 void * ata_io 86 ) 87 { 88 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 89 90 /** 91 * SAT dictates: 92 * - the LBA field must be 0 93 * - the PMI bit must be 0 94 */ 95 if ( 96 ( 97 (sati_get_cdb_byte(cdb, 2) != 0) 98 || (sati_get_cdb_byte(cdb, 3) != 0) 99 || (sati_get_cdb_byte(cdb, 4) != 0) 100 || (sati_get_cdb_byte(cdb, 5) != 0) 101 ) 102 || ((sati_get_cdb_byte(cdb, 8) & SCSI_READ_CAPACITY_PMI_BIT_ENABLE) 103 == 1) 104 ) 105 { 106 sati_scsi_sense_data_construct( 107 sequence, 108 scsi_io, 109 SCSI_STATUS_CHECK_CONDITION, 110 SCSI_SENSE_ILLEGAL_REQUEST, 111 SCSI_ASC_INVALID_FIELD_IN_CDB, 112 SCSI_ASCQ_INVALID_FIELD_IN_CDB 113 ); 114 return SATI_FAILURE_CHECK_RESPONSE_DATA; 115 } 116 117 // The CDB is properly formed. 118 sequence->allocation_length = SCSI_READ_CAPACITY_10_DATA_LENGTH; 119 sequence->type = SATI_SEQUENCE_READ_CAPACITY_10; 120 121 sati_ata_identify_device_construct(ata_io, sequence); 122 return SATI_SUCCESS; 123 } 124 125 126 127 /** 128 * @brief This method will translate the read capacity 16 SCSI command into 129 * an ATA IDENTIFY DEVICE command. 130 * For more information on the parameters passed to this method, 131 * please reference sati_translate_command(). 132 * 133 * @return Indicate if the command translation succeeded. 134 * @retval SCI_SUCCESS This is returned if the command translation was 135 * successful. 136 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if the 137 * LBA field is not 0, the PMI bit is not 0. 138 */ 139 SATI_STATUS sati_read_capacity_16_translate_command( 140 SATI_TRANSLATOR_SEQUENCE_T * sequence, 141 void * scsi_io, 142 void * ata_io 143 ) 144 { 145 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 146 147 /** 148 * SAT dictates: 149 * - the LBA field must be 0 150 * - the PMI bit must be 0 151 */ 152 if ( 153 ( 154 (sati_get_cdb_byte(cdb, 2) != 0) 155 || (sati_get_cdb_byte(cdb, 3) != 0) 156 || (sati_get_cdb_byte(cdb, 4) != 0) 157 || (sati_get_cdb_byte(cdb, 5) != 0) 158 || (sati_get_cdb_byte(cdb, 6) != 0) 159 || (sati_get_cdb_byte(cdb, 7) != 0) 160 || (sati_get_cdb_byte(cdb, 8) != 0) 161 || (sati_get_cdb_byte(cdb, 9) != 0) 162 ) 163 || ((sati_get_cdb_byte(cdb, 14) & SCSI_READ_CAPACITY_PMI_BIT_ENABLE) 164 == 1) 165 ) 166 { 167 sati_scsi_sense_data_construct( 168 sequence, 169 scsi_io, 170 SCSI_STATUS_CHECK_CONDITION, 171 SCSI_SENSE_ILLEGAL_REQUEST, 172 SCSI_ASC_INVALID_FIELD_IN_CDB, 173 SCSI_ASCQ_INVALID_FIELD_IN_CDB 174 ); 175 return SATI_FAILURE_CHECK_RESPONSE_DATA; 176 } 177 178 // The CDB is properly formed. 179 sequence->allocation_length = (sati_get_cdb_byte(cdb, 10) << 24) | 180 (sati_get_cdb_byte(cdb, 11) << 16) | 181 (sati_get_cdb_byte(cdb, 12) << 8) | 182 (sati_get_cdb_byte(cdb, 13)); 183 184 sequence->type = SATI_SEQUENCE_READ_CAPACITY_16; 185 186 sati_ata_identify_device_construct(ata_io, sequence); 187 return SATI_SUCCESS; 188 } 189 190 /** 191 * @brief This method will translate the ATA Identify Device data into 192 * SCSI read capacity 10 data. 193 * For more information on the parameters passed to this method, 194 * please reference sati_translate_data(). 195 * 196 * @return none 197 */ 198 void sati_read_capacity_10_translate_data( 199 SATI_TRANSLATOR_SEQUENCE_T * sequence, 200 void * ata_input_data, 201 void * scsi_io 202 ) 203 { 204 U32 lba_low = 0; 205 U32 lba_high = 0; 206 U32 sector_size = 0; 207 208 // Extract the sector information (sector size, logical blocks) from 209 // the retrieved ATA identify device data. 210 sati_ata_identify_device_get_sector_info( 211 (ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data, 212 &lba_high, 213 &lba_low, 214 §or_size 215 ); 216 217 // SATA drives report a value that is one LBA larger than the last LBA. 218 // SCSI wants the last LBA. Make the correction here. lba_low is 219 // always decremented since it is an unsigned long the value 0 will 220 // wrap to 0xFFFFFFFF. 221 if ((lba_low == 0) && (lba_high == 0)) 222 lba_high -= 1; 223 lba_low -= 1; 224 225 if(lba_high != 0) 226 { 227 sati_set_data_byte(sequence, scsi_io, 0, 0xFF); 228 sati_set_data_byte(sequence, scsi_io, 1, 0xFF); 229 sati_set_data_byte(sequence, scsi_io, 2, 0xFF); 230 sati_set_data_byte(sequence, scsi_io, 3, 0xFF); 231 } 232 else 233 { 234 // Build CDB for Read Capacity 10 235 // Fill in the Logical Block Address bytes. 236 sati_set_data_byte(sequence, scsi_io, 0, (U8)((lba_low >> 24) & 0xFF)); 237 sati_set_data_byte(sequence, scsi_io, 1, (U8)((lba_low >> 16) & 0xFF)); 238 sati_set_data_byte(sequence, scsi_io, 2, (U8)((lba_low >> 8) & 0xFF)); 239 sati_set_data_byte(sequence, scsi_io, 3, (U8)(lba_low & 0xFF)); 240 } 241 // Fill in the sector size field. 242 sati_set_data_byte(sequence, scsi_io, 4, (U8)((sector_size >> 24) & 0xFF)); 243 sati_set_data_byte(sequence, scsi_io, 5, (U8)((sector_size >> 16) & 0xFF)); 244 sati_set_data_byte(sequence, scsi_io, 6, (U8)((sector_size >> 8) & 0xFF)); 245 sati_set_data_byte(sequence, scsi_io, 7, (U8)(sector_size & 0xFF)); 246 } 247 248 /** 249 * @brief This method will translate the ATA Identify Device data into 250 * SCSI read capacity 16 data. 251 * For more information on the parameters passed to this method, 252 * please reference sati_translate_data(). 253 * 254 * @return none 255 */ 256 void sati_read_capacity_16_translate_data( 257 SATI_TRANSLATOR_SEQUENCE_T * sequence, 258 void * ata_input_data, 259 void * scsi_io 260 ) 261 { 262 U32 lba_low = 0; 263 U32 lba_high = 0; 264 U32 sector_size = 0; 265 ATA_IDENTIFY_DEVICE_DATA_T * identify_device_data; 266 U16 physical_per_logical_enable_bit = 0; 267 U8 physical_per_logical_sector_exponent = 0; 268 U16 physical_per_logical_sector = 0; 269 U16 logical_sector_alignment = 0; 270 U16 scsi_logical_sector_alignment = 0; 271 U8 byte14 = 0; 272 273 //A number of data fields need to be extracted from ATA identify device data 274 identify_device_data = (ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data; 275 276 // Extract the sector information (sector size, logical blocks) from 277 // the retrieved ATA identify device data. 278 sati_ata_identify_device_get_sector_info( 279 (ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data, 280 &lba_high, 281 &lba_low, 282 §or_size 283 ); 284 285 // SATA drives report a value that is one LBA larger than the last LBA. 286 // SCSI wants the last LBA. Make the correction here. lba_low is 287 // always decremented since it is an unsigned long the value 0 will 288 // wrap to 0xFFFFFFFF. 289 if ((lba_low == 0) && (lba_high == 0)) 290 lba_high -= 1; 291 lba_low -= 1; 292 293 // Build the CDB for Read Capacity 16 294 // Fill in the Logical Block Address bytes. 295 sati_set_data_byte(sequence, scsi_io, 0, (U8)((lba_high >> 24) & 0xFF)); 296 sati_set_data_byte(sequence, scsi_io, 1, (U8)((lba_high >> 16) & 0xFF)); 297 sati_set_data_byte(sequence, scsi_io, 2, (U8)((lba_high >> 8) & 0xFF)); 298 sati_set_data_byte(sequence, scsi_io, 3, (U8)(lba_high & 0xFF)); 299 300 sati_set_data_byte(sequence, scsi_io, 4, (U8)((lba_low >> 24) & 0xFF)); 301 sati_set_data_byte(sequence, scsi_io, 5, (U8)((lba_low >> 16) & 0xFF)); 302 sati_set_data_byte(sequence, scsi_io, 6, (U8)((lba_low >> 8) & 0xFF)); 303 sati_set_data_byte(sequence, scsi_io, 7, (U8)(lba_low & 0xFF)); 304 305 //Fill in the sector size field. 306 sati_set_data_byte(sequence, scsi_io, 8, (U8)((sector_size >> 24) & 0xFF)); 307 sati_set_data_byte(sequence, scsi_io, 9, (U8)((sector_size >> 16) & 0xFF)); 308 sati_set_data_byte(sequence, scsi_io, 10, (U8)((sector_size >> 8) & 0xFF)); 309 sati_set_data_byte(sequence, scsi_io, 11, (U8)(sector_size & 0xFF)); 310 311 //Explicitly set byte 12 to 0. SATI requires that all bytes in the data 312 //response be explicitly set to some value. 313 sati_set_data_byte(sequence, scsi_io, 12, 0); 314 315 //Check Bit 13 of ATA_IDENTIFY_DEVICE_DATA physical_logical_sector_info 316 //(Word 106) is enabled 317 physical_per_logical_enable_bit = (identify_device_data->physical_logical_sector_info 318 & ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_ENABLE); 319 320 //Extract the Physical per logical sector exponent field and calculate 321 //Physical per logical sector value 322 physical_per_logical_sector_exponent = (U8) (identify_device_data->physical_logical_sector_info 323 & ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_MASK); 324 physical_per_logical_sector = 1 << (physical_per_logical_sector_exponent); 325 326 //If the data is valid, fill in the logical blocks per physical block exponent field. 327 //Else set logical blocks per physical block exponent to 1 328 if (physical_per_logical_enable_bit != 0) 329 sati_set_data_byte( 330 sequence, 331 scsi_io, 332 13, 333 (U8)(physical_per_logical_sector_exponent & 0xFF) 334 ); 335 else 336 sati_set_data_byte(sequence, scsi_io, 13, 0); 337 338 //Fill in the lowest aligned logical block address field. 339 logical_sector_alignment = identify_device_data->logical_sector_alignment; 340 if (logical_sector_alignment == 0) 341 scsi_logical_sector_alignment = 0; 342 else 343 scsi_logical_sector_alignment = (physical_per_logical_sector - logical_sector_alignment) 344 % physical_per_logical_sector; 345 346 //Follow SAT for reporting tprz and tpe 347 if ((sequence->device->capabilities & SATI_DEVICE_CAP_DSM_TRIM_SUPPORT) && 348 (sequence->device->capabilities & SATI_DEVICE_CAP_DETERMINISTIC_READ_AFTER_TRIM)) 349 { 350 // tpe 351 byte14 |= 0x80; 352 // tprz 353 if (sequence->device->capabilities & SATI_DEVICE_CAP_READ_ZERO_AFTER_TRIM) 354 byte14 |= 0x40; 355 } 356 sati_set_data_byte( 357 sequence, 358 scsi_io, 359 14, 360 (U8)(((scsi_logical_sector_alignment >>8) & 0x3F) | byte14)); 361 362 sati_set_data_byte( 363 sequence, 364 scsi_io, 365 15, 366 (U8)(scsi_logical_sector_alignment & 0xFF)); 367 } 368 369 #endif // !defined(DISABLE_SATI_READ_CAPACITY) 370 371