1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 23 * The full GNU General Public License is included in this distribution 24 * in the file called LICENSE.GPL. 25 * 26 * BSD LICENSE 27 * 28 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 43 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 44 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 45 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 46 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 47 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 48 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 */ 54 55 #include <sys/cdefs.h> 56 __FBSDID("$FreeBSD$"); 57 58 /** 59 * @file 60 * @brief This file contains the method implementations required to 61 * translate the SCSI mode sense 6-byte commands. 62 */ 63 64 #if !defined(DISABLE_SATI_MODE_SENSE) 65 66 #include <dev/isci/scil/sati_mode_sense.h> 67 #include <dev/isci/scil/sati_mode_sense_6.h> 68 #include <dev/isci/scil/sati_mode_pages.h> 69 #include <dev/isci/scil/sati_callbacks.h> 70 #include <dev/isci/scil/sati_util.h> 71 #include <dev/isci/scil/intel_scsi.h> 72 #include <dev/isci/scil/intel_ata.h> 73 74 //****************************************************************************** 75 //* P R I V A T E M E T H O D S 76 //****************************************************************************** 77 78 /** 79 * @brief This method builds the mode parameter header for a 6-byte SCSI 80 * mode sense data response. The parameter header is 4 bytes in 81 * size. 82 * For more information on the parameters passed to this method, 83 * please reference sati_translate_command(). 84 * 85 * @param[in] identify This parameter specifies the ATA remote device's 86 * received IDENTIFY DEVICE data. 87 * @param[in] mode_data_length This parameter specifies the amount of data 88 * to be returned as part of this mode sense request. 89 * 90 * @return This method returns the number of bytes written into the 91 * data buffer. 92 */ 93 static 94 U32 sati_mode_sense_6_build_header( 95 SATI_TRANSLATOR_SEQUENCE_T * sequence, 96 void * scsi_io, 97 ATA_IDENTIFY_DEVICE_DATA_T * identify, 98 U8 mode_data_length 99 ) 100 { 101 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 102 103 // Fill in the length of the mode parameter data returned (do not include 104 // the size of the mode data length field in the total). 105 sati_set_data_byte(sequence, scsi_io, 0, (U8)mode_data_length-1); 106 107 // Medium Type is 0 for SBC devices 108 sati_set_data_byte(sequence, scsi_io, 1, SCSI_MODE_HEADER_MEDIUM_TYPE_SBC); 109 110 // Write Protect (WP), Rsvd, DPOFUA, Rsvd 111 if (sequence->device->capabilities & SATI_DEVICE_CAP_DMA_FUA_ENABLE) 112 sati_set_data_byte(sequence,scsi_io,2,SCSI_MODE_SENSE_HEADER_FUA_ENABLE); 113 else 114 sati_set_data_byte(sequence, scsi_io, 2, 0); 115 116 // Set the block descriptor length if block descriptors are utilized. 117 if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) 118 sati_set_data_byte(sequence, scsi_io, 3, 0); 119 else 120 sati_set_data_byte( 121 sequence, scsi_io, 3, SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 122 ); 123 124 return SCSI_MODE_SENSE_6_HEADER_LENGTH; 125 } 126 127 /** 128 * @brief This method perform the data translation common to all SCSI MODE 129 * SENSE 6 byte commands. This includes building the mode page 130 * header and block descriptor (if requested). 131 * For more information on the parameters passed to this method, 132 * please reference sati_translate_command(). 133 * 134 * @param[in] identify This parameter specifies the remote device's IDENTIFY 135 * DEVICE data to be used during translation. 136 * @param[in] transfer_length This parameter specifies the size of the 137 * mode page (including header & block descriptor). 138 * 139 * @return This method returns the number of bytes written into the user's 140 * mode page data buffer. 141 */ 142 static 143 U32 sati_mode_sense_6_translate_data( 144 SATI_TRANSLATOR_SEQUENCE_T * sequence, 145 ATA_IDENTIFY_DEVICE_DATA_T * identify, 146 void * scsi_io, 147 U8 transfer_length 148 ) 149 { 150 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 151 U32 offset; 152 153 offset = sati_mode_sense_6_build_header( 154 sequence, scsi_io, identify, transfer_length 155 ); 156 157 // Determine if the caller disabled block descriptors (DBD). If not, 158 // then generate a block descriptor. 159 if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) == 0) 160 offset += sati_mode_sense_build_std_block_descriptor( 161 sequence, scsi_io, identify, offset 162 ); 163 164 return offset; 165 } 166 167 //****************************************************************************** 168 //* P R O T E C T E D M E T H O D S 169 //****************************************************************************** 170 171 /** 172 * @brief This method will translate the SCSI mode sense 6 byte command 173 * into corresponding ATA commands. If the command is well-formed, 174 * then the translation will result in an ATA IDENTIFY DEVICE 175 * command. 176 * For more information on the parameters passed to this method, 177 * please reference sati_translate_command(). 178 * 179 * @return Indicate if the command translation succeeded. 180 * @retval SCI_SUCCESS This is returned if the command translation was 181 * successful. 182 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if 183 * sense data has been created as a result of something specified 184 * in the CDB. 185 */ 186 SATI_STATUS sati_mode_sense_6_translate_command( 187 SATI_TRANSLATOR_SEQUENCE_T * sequence, 188 void * scsi_io, 189 void * ata_io 190 ) 191 { 192 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 193 194 // Set the data length based on the allocation length field in the CDB. 195 sequence->allocation_length = sati_get_cdb_byte(cdb, 4); 196 197 return sati_mode_sense_translate_command(sequence, scsi_io, ata_io, 6); 198 } 199 200 /** 201 * @brief This method will perform data translation from the supplied ATA 202 * input data (i.e. an ATA IDENTIFY DEVICE block) into a CACHING 203 * mode page format. The data will be written into the user's mode 204 * page data buffer. This function operates specifically for MODE 205 * SENSE 6 commands. 206 * For more information on the parameters passed to this method, 207 * please reference sati_translate_data(). 208 * 209 * @return none. 210 */ 211 void sati_mode_sense_6_caching_translate_data( 212 SATI_TRANSLATOR_SEQUENCE_T * sequence, 213 void * ata_input_data, 214 void * scsi_io 215 ) 216 { 217 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 218 ata_input_data; 219 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 220 + SCSI_MODE_PAGE_08_LENGTH; 221 U32 page_offset = sati_mode_sense_6_translate_data( 222 sequence, identify, scsi_io, data_length 223 ); 224 225 sati_mode_sense_caching_translate_data( 226 sequence, scsi_io, identify, page_offset 227 ); 228 } 229 230 /** 231 * @brief This method will perform data translation from the supplied ATA 232 * input data (i.e. an ATA IDENTIFY DEVICE block) into a INFORMATIONAL 233 * EXCEPTIONS CONTROL mode page format. The data will be written 234 * into the user's mode page data buffer. This function operates 235 * specifically for MODE SENSE 6 commands. 236 * For more information on the parameters passed to this method, 237 * please reference sati_translate_data(). 238 * 239 * @return none. 240 */ 241 void sati_mode_sense_6_informational_excp_control_translate_data( 242 SATI_TRANSLATOR_SEQUENCE_T * sequence, 243 void * ata_input_data, 244 void * scsi_io 245 ) 246 { 247 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 248 ata_input_data; 249 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 250 + SCSI_MODE_PAGE_1C_LENGTH; 251 U32 page_offset = sati_mode_sense_6_translate_data( 252 sequence, identify, scsi_io, data_length 253 ); 254 255 sati_mode_sense_informational_excp_control_translate_data( 256 sequence, scsi_io, identify, page_offset 257 ); 258 } 259 260 /** 261 * @brief This method will perform data translation from the supplied ATA 262 * input data (i.e. an ATA IDENTIFY DEVICE block) into a DISCONNECT 263 * RECONNECT mode page format. The data will be written 264 * into the user's mode page data buffer. This function operates 265 * specifically for MODE SENSE 6 commands. 266 * For more information on the parameters passed to this method, 267 * please reference sati_translate_data(). 268 * 269 * @return none. 270 */ 271 void sati_mode_sense_6_disconnect_reconnect_translate_data( 272 SATI_TRANSLATOR_SEQUENCE_T * sequence, 273 void * ata_input_data, 274 void * scsi_io 275 ) 276 { 277 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 278 ata_input_data; 279 280 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 281 + SCSI_MODE_PAGE_02_LENGTH ; 282 283 U32 page_offset = sati_mode_sense_6_translate_data( 284 sequence, identify, scsi_io, data_length 285 ); 286 287 sati_mode_sense_disconnect_reconnect_translate_data( 288 sequence, scsi_io, identify, page_offset 289 ); 290 } 291 292 /** 293 * @brief This method will perform data translation from the supplied ATA 294 * input data (i.e. an ATA IDENTIFY DEVICE block) into a READ WRITE ERROR 295 * mode page format. The data will be written 296 * into the user's mode page data buffer. This function operates 297 * specifically for MODE SENSE 6 commands. 298 * For more information on the parameters passed to this method, 299 * please reference sati_translate_data(). 300 * 301 * @return none. 302 */ 303 void sati_mode_sense_6_read_write_error_translate_data( 304 SATI_TRANSLATOR_SEQUENCE_T * sequence, 305 void * ata_input_data, 306 void * scsi_io 307 ) 308 { 309 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 310 ata_input_data; 311 312 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 313 + SCSI_MODE_PAGE_01_LENGTH; 314 315 U32 page_offset = sati_mode_sense_6_translate_data( 316 sequence, identify, scsi_io, data_length 317 ); 318 319 sati_mode_sense_read_write_error_translate_data( 320 sequence, scsi_io, identify, page_offset 321 ); 322 } 323 324 /** 325 * @brief This method will perform data translation from the supplied ATA 326 * input data (i.e. an ATA IDENTIFY DEVICE block) into a CONTROL 327 * mode page format. The data will be written 328 * into the user's mode page data buffer. This function operates 329 * specifically for MODE SENSE 6 commands. 330 * For more information on the parameters passed to this method, 331 * please reference sati_translate_data(). 332 * 333 * @return none. 334 */ 335 void sati_mode_sense_6_control_translate_data( 336 SATI_TRANSLATOR_SEQUENCE_T * sequence, 337 void * ata_input_data, 338 void * scsi_io 339 ) 340 { 341 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 342 ata_input_data; 343 344 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 345 + SCSI_MODE_PAGE_0A_LENGTH; 346 347 U32 page_offset = sati_mode_sense_6_translate_data( 348 sequence, identify, scsi_io, data_length 349 ); 350 351 sati_mode_sense_control_translate_data( 352 sequence, scsi_io, identify, page_offset 353 ); 354 } 355 356 /** 357 * @brief This method will perform data translation from the supplied ATA 358 * input data (i.e. an ATA IDENTIFY DEVICE block) into a Power 359 * Condition mode page format. The data will be written 360 * into the user's mode page data buffer. This function operates 361 * specifically for MODE SENSE 6 commands. 362 * For more information on the parameters passed to this method, 363 * please reference sati_translate_data(). 364 * 365 * @return none. 366 */ 367 void sati_mode_sense_6_power_condition_translate_data( 368 SATI_TRANSLATOR_SEQUENCE_T * sequence, 369 void * ata_input_data, 370 void * scsi_io 371 ) 372 { 373 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 374 ata_input_data; 375 376 U8 data_length; 377 U32 page_offset; 378 379 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 380 + SCSI_MODE_PAGE_1A_LENGTH; 381 382 page_offset = sati_mode_sense_6_translate_data( 383 sequence, identify, scsi_io, data_length 384 ); 385 386 sati_mode_sense_power_condition_translate_data( 387 sequence, scsi_io, identify, page_offset 388 ); 389 } 390 391 392 393 /** 394 * @brief This method will perform data translation from the supplied ATA 395 * input data (i.e. an ATA IDENTIFY DEVICE block) into an ALL 396 * PAGES mode page format. The ALL PAGES mode page is basically a 397 * conglomeration of all mode pages and sub-pages into a single 398 * page. The data will be written into the user's mode page 399 * data buffer. This function operates specifically for MODE 400 * SENSE 6 commands. 401 * For more information on the parameters passed to this method, 402 * please reference sati_translate_data(). 403 * 404 * @return none. 405 */ 406 void sati_mode_sense_6_all_pages_translate_data( 407 SATI_TRANSLATOR_SEQUENCE_T * sequence, 408 void * ata_input_data, 409 void * scsi_io 410 ) 411 { 412 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 413 ata_input_data; 414 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 6) 415 + SCSI_MODE_PAGE_01_LENGTH 416 + SCSI_MODE_PAGE_02_LENGTH 417 + SCSI_MODE_PAGE_08_LENGTH 418 + SCSI_MODE_PAGE_0A_LENGTH 419 + SCSI_MODE_PAGE_1C_LENGTH; 420 421 U32 page_offset = sati_mode_sense_6_translate_data( 422 sequence, identify, scsi_io, data_length 423 ); 424 425 sati_mode_sense_all_pages_translate_data( 426 sequence, scsi_io, identify, page_offset 427 ); 428 } 429 430 #endif // !defined(DISABLE_SATI_MODE_SENSE) 431 432