1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause OR GPL-2.0 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 23 * The full GNU General Public License is included in this distribution 24 * in the file called LICENSE.GPL. 25 * 26 * BSD LICENSE 27 * 28 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 35 * * Redistributions of source code must retain the above copyright 36 * notice, this list of conditions and the following disclaimer. 37 * * Redistributions in binary form must reproduce the above copyright 38 * notice, this list of conditions and the following disclaimer in 39 * the documentation and/or other materials provided with the 40 * distribution. 41 * 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 43 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 44 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 45 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 46 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 47 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 48 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 49 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 50 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 51 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 52 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 53 */ 54 55 #include <sys/cdefs.h> 56 /** 57 * @file 58 * @brief This file contains the method implementations required to 59 * translate the SCSI mode sense 10-byte commands. 60 */ 61 62 #if !defined(DISABLE_SATI_MODE_SENSE) 63 64 #include <dev/isci/scil/sati_mode_sense.h> 65 #include <dev/isci/scil/sati_mode_sense_10.h> 66 #include <dev/isci/scil/sati_mode_pages.h> 67 #include <dev/isci/scil/sati_callbacks.h> 68 #include <dev/isci/scil/sati_util.h> 69 #include <dev/isci/scil/intel_scsi.h> 70 #include <dev/isci/scil/intel_ata.h> 71 72 //****************************************************************************** 73 //* P R I V A T E M E T H O D S 74 //****************************************************************************** 75 76 /** 77 * @brief This method builds the mode parameter header for a 10-byte SCSI 78 * mode sense data response. The parameter header is 4 bytes in 79 * size. 80 * For more information on the parameters passed to this method, 81 * please reference sati_translate_command(). 82 * 83 * @param[in] identify This parameter specifies the ATA remote device's 84 * received IDENTIFY DEVICE data. 85 * @param[in] mode_data_length This parameter specifies the amount of data 86 * to be returned as part of this mode sense request. 87 * 88 * @return This method returns the number of bytes written into the 89 * mode sense data buffer. 90 */ 91 static 92 U32 sati_mode_sense_10_build_header( 93 SATI_TRANSLATOR_SEQUENCE_T * sequence, 94 void * scsi_io, 95 ATA_IDENTIFY_DEVICE_DATA_T * identify, 96 U16 mode_data_length 97 ) 98 { 99 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 100 101 // Fill in the length of the mode parameter data returned (do not include 102 // the size of the mode data length field in the total). Adjust the 103 // mode data length to not include the mode data length fields itself 104 // (i.e. subtract 2). 105 mode_data_length -= 2; 106 sati_set_data_byte(sequence, scsi_io, 0, (U8)(mode_data_length >> 8) & 0xFF); 107 sati_set_data_byte(sequence, scsi_io, 1, (U8)(mode_data_length & 0xFF)); 108 109 // Medium Type is 0 for SBC devices 110 sati_set_data_byte(sequence, scsi_io, 2, SCSI_MODE_HEADER_MEDIUM_TYPE_SBC); 111 112 // Write Protect (WP), Rsvd, DPOFUA, Rsvd 113 if (sequence->device->capabilities & SATI_DEVICE_CAP_DMA_FUA_ENABLE) 114 sati_set_data_byte(sequence,scsi_io,3,SCSI_MODE_SENSE_HEADER_FUA_ENABLE); 115 else 116 sati_set_data_byte(sequence, scsi_io, 3, 0); 117 118 // Set the reserved bytes to 0. The LONGLBA field in byte 4 is overridden 119 // later in this method if LLBAA is enabled. 120 sati_set_data_byte(sequence, scsi_io, 4, 0); 121 sati_set_data_byte(sequence, scsi_io, 5, 0); 122 123 // The MSB for the block descriptor length is never used since the 124 // largest block descriptor in this translator is 16-bytes in size. 125 sati_set_data_byte(sequence, scsi_io, 6, 0); 126 127 // Set the LSB block descriptor length if block descriptors are utilized. 128 if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) 129 sati_set_data_byte(sequence, scsi_io, 7, 0); 130 else 131 { 132 // If Long Logical Block Address are allowed, then the block descriptor 133 // is larger (16 bytes total). 134 if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_LLBAA_ENABLE) 135 { 136 sati_set_data_byte(sequence, scsi_io, 4, 1); 137 sati_set_data_byte( 138 sequence, scsi_io, 7, SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 139 ); 140 } 141 else 142 { 143 sati_set_data_byte( 144 sequence, scsi_io, 7, SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 145 ); 146 } 147 } 148 149 return SCSI_MODE_SENSE_10_HEADER_LENGTH; 150 } 151 152 static 153 U32 sati_mode_sense_10_build_llba_block_descriptor( 154 SATI_TRANSLATOR_SEQUENCE_T * sequence, 155 void * scsi_io, 156 ATA_IDENTIFY_DEVICE_DATA_T * identify, 157 U32 offset 158 ) 159 { 160 U32 lba_low = 0; 161 U32 lba_high = 0; 162 U32 sector_size = 0; 163 164 // Extract the sector information (sector size, logical blocks) from 165 // the retrieved ATA identify device data. 166 sati_ata_identify_device_get_sector_info( 167 identify, &lba_low, &lba_high, §or_size 168 ); 169 170 // Fill in the 8-byte logical block area 171 sati_set_data_byte(sequence, scsi_io, offset, (U8)((lba_high>>24) & 0xFF)); 172 sati_set_data_byte(sequence, scsi_io, offset+1, (U8)((lba_high>>16) & 0xFF)); 173 sati_set_data_byte(sequence, scsi_io, offset+2, (U8)((lba_high>>8) & 0xFF)); 174 sati_set_data_byte(sequence, scsi_io, offset+3, (U8)(lba_high & 0xFF)); 175 sati_set_data_byte(sequence, scsi_io, offset+4, (U8)((lba_low>>24) & 0xFF)); 176 sati_set_data_byte(sequence, scsi_io, offset+5, (U8)((lba_low>>16) & 0xFF)); 177 sati_set_data_byte(sequence, scsi_io, offset+6, (U8)((lba_low>>8) & 0xFF)); 178 sati_set_data_byte(sequence, scsi_io, offset+7, (U8)(lba_low & 0xFF)); 179 180 // Clear the reserved fields. 181 sati_set_data_byte(sequence, scsi_io, offset+8, 0); 182 sati_set_data_byte(sequence, scsi_io, offset+9, 0); 183 sati_set_data_byte(sequence, scsi_io, offset+10, 0); 184 sati_set_data_byte(sequence, scsi_io, offset+11, 0); 185 186 // Fill in the four byte Block Length field 187 sati_set_data_byte(sequence,scsi_io, offset+12, (U8)((sector_size>>24) & 0xFF)); 188 sati_set_data_byte(sequence,scsi_io, offset+13, (U8)((sector_size>>16) & 0xFF)); 189 sati_set_data_byte(sequence,scsi_io, offset+14, (U8)((sector_size>>8) & 0xFF)); 190 sati_set_data_byte(sequence,scsi_io, offset+15, (U8)(sector_size & 0xFF)); 191 192 return SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH; 193 } 194 195 /** 196 * @brief This method perform the data translation common to all SCSI MODE 197 * SENSE 10 byte commands. This includes building the mode page 198 * header and block descriptor (if requested). 199 * For more information on the parameters passed to this method, 200 * please reference sati_translate_command(). 201 * 202 * @param[in] identify This parameter specifies the remote device's IDENTIFY 203 * DEVICE data to be used during translation. 204 * @param[in] transfer_length This parameter specifies the size of the 205 * mode page (including header & block descriptor). 206 * 207 * @return This method returns the number of bytes written into the user's 208 * mode page data buffer. 209 */ 210 static 211 U32 sati_mode_sense_10_translate_data( 212 SATI_TRANSLATOR_SEQUENCE_T * sequence, 213 ATA_IDENTIFY_DEVICE_DATA_T * identify, 214 void * scsi_io, 215 U16 transfer_length 216 ) 217 { 218 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 219 U32 offset; 220 221 offset = sati_mode_sense_10_build_header( 222 sequence, scsi_io, identify, transfer_length 223 ); 224 225 // Determine if the caller disabled block descriptors (DBD). If not, 226 // then generate a block descriptor. 227 if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_DBD_ENABLE) == 0) 228 { 229 // If the user requested the Long LBA format descriptor, then build 230 // it 231 if (sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SENSE_LLBAA_ENABLE) 232 offset += sati_mode_sense_10_build_llba_block_descriptor( 233 sequence, scsi_io, identify, offset 234 ); 235 else 236 offset += sati_mode_sense_build_std_block_descriptor( 237 sequence, scsi_io, identify, offset 238 ); 239 } 240 241 return offset; 242 } 243 244 //****************************************************************************** 245 //* P R O T E C T E D M E T H O D S 246 //****************************************************************************** 247 248 /** 249 * @brief This method will translate the SCSI mode sense 6 byte command 250 * into corresponding ATA commands. If the command is well-formed, 251 * then the translation will result in an ATA IDENTIFY DEVICE 252 * command. 253 * For more information on the parameters passed to this method, 254 * please reference sati_translate_command(). 255 * 256 * @return Indicate if the command translation succeeded. 257 * @retval SCI_SUCCESS This is returned if the command translation was 258 * successful. 259 * @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if 260 * sense data has been created as a result of something specified 261 * in the CDB. 262 */ 263 SATI_STATUS sati_mode_sense_10_translate_command( 264 SATI_TRANSLATOR_SEQUENCE_T * sequence, 265 void * scsi_io, 266 void * ata_io 267 ) 268 { 269 U8 * cdb = sati_cb_get_cdb_address(scsi_io); 270 271 sequence->command_specific_data.scratch = 0; 272 273 // Set the data length based on the allocation length field in the CDB. 274 sequence->allocation_length = (sati_get_cdb_byte(cdb, 7) << 8) | 275 (sati_get_cdb_byte(cdb, 8)); 276 277 return sati_mode_sense_translate_command(sequence, scsi_io, ata_io, 10); 278 } 279 280 /** 281 * @brief This method will perform data translation from the supplied ATA 282 * input data (i.e. an ATA IDENTIFY DEVICE block) into a CACHING 283 * mode page format. The data will be written into the user's mode 284 * page data buffer. This function operates specifically for MODE 285 * SENSE 10 commands. 286 * For more information on the parameters passed to this method, 287 * please reference sati_translate_data(). 288 * 289 * @return none. 290 */ 291 void sati_mode_sense_10_caching_translate_data( 292 SATI_TRANSLATOR_SEQUENCE_T * sequence, 293 void * ata_input_data, 294 void * scsi_io 295 ) 296 { 297 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 298 ata_input_data; 299 U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) 300 + SCSI_MODE_PAGE_08_LENGTH; 301 U32 page_offset = sati_mode_sense_10_translate_data( 302 sequence, identify, scsi_io, data_length 303 ); 304 305 sati_mode_sense_caching_translate_data( 306 sequence, scsi_io, identify, page_offset 307 ); 308 } 309 310 /** 311 * @brief This method will perform data translation from the supplied ATA 312 * input data (i.e. an ATA IDENTIFY DEVICE block) into a INFORMATIONAL 313 * EXCEPTIONS CONTROL mode page format. The data will be written 314 * into the user's mode page data buffer. This function operates 315 * specifically for MODE SENSE 10 commands. 316 * For more information on the parameters passed to this method, 317 * please reference sati_translate_data(). 318 * 319 * @return none. 320 */ 321 void sati_mode_sense_10_informational_excp_control_translate_data( 322 SATI_TRANSLATOR_SEQUENCE_T * sequence, 323 void * ata_input_data, 324 void * scsi_io 325 ) 326 { 327 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 328 ata_input_data; 329 U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) 330 + SCSI_MODE_PAGE_1C_LENGTH; 331 U32 page_offset = sati_mode_sense_10_translate_data( 332 sequence, identify, scsi_io, data_length 333 ); 334 335 sati_mode_sense_informational_excp_control_translate_data( 336 sequence, scsi_io, identify, page_offset 337 ); 338 } 339 340 /** 341 * @brief This method will perform data translation from the supplied ATA 342 * input data (i.e. an ATA IDENTIFY DEVICE block) into a Read Write Error 343 * mode page format. The data will be written 344 * into the user's mode page data buffer. This function operates 345 * specifically for MODE SENSE 10 commands. 346 * For more information on the parameters passed to this method, 347 * please reference sati_translate_data(). 348 * 349 * @return none. 350 */ 351 void sati_mode_sense_10_read_write_error_translate_data( 352 SATI_TRANSLATOR_SEQUENCE_T * sequence, 353 void * ata_input_data, 354 void * scsi_io 355 ) 356 { 357 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 358 ata_input_data; 359 360 U16 data_length = sati_mode_sense_calculate_page_header(scsi_io, 10) 361 + SCSI_MODE_PAGE_01_LENGTH; 362 363 U32 page_offset = sati_mode_sense_10_translate_data( 364 sequence, identify, scsi_io, data_length 365 ); 366 367 sati_mode_sense_read_write_error_translate_data( 368 sequence, scsi_io, identify, page_offset 369 ); 370 } 371 372 /** 373 * @brief This method will perform data translation from the supplied ATA 374 * input data (i.e. an ATA IDENTIFY DEVICE block) into a Disconnect 375 * Reconnect mode page format. The data will be written 376 * into the user's mode page data buffer. This function operates 377 * specifically for MODE SENSE 10 commands. 378 * For more information on the parameters passed to this method, 379 * please reference sati_translate_data(). 380 * 381 * @return none. 382 */ 383 void sati_mode_sense_10_disconnect_reconnect_translate_data( 384 SATI_TRANSLATOR_SEQUENCE_T * sequence, 385 void * ata_input_data, 386 void * scsi_io 387 ) 388 { 389 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 390 ata_input_data; 391 392 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) 393 + SCSI_MODE_PAGE_02_LENGTH; 394 395 U32 page_offset = sati_mode_sense_10_translate_data( 396 sequence, identify, scsi_io, data_length 397 ); 398 399 sati_mode_sense_disconnect_reconnect_translate_data( 400 sequence, scsi_io, identify, page_offset 401 ); 402 } 403 404 /** 405 * @brief This method will perform data translation from the supplied ATA 406 * input data (i.e. an ATA IDENTIFY DEVICE block) into a Control 407 * mode page format. The data will be written 408 * into the user's mode page data buffer. This function operates 409 * specifically for MODE SENSE 10 commands. 410 * For more information on the parameters passed to this method, 411 * please reference sati_translate_data(). 412 * 413 * @return none. 414 */ 415 void sati_mode_sense_10_control_translate_data( 416 SATI_TRANSLATOR_SEQUENCE_T * sequence, 417 void * ata_input_data, 418 void * scsi_io 419 ) 420 { 421 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 422 ata_input_data; 423 424 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) 425 + SCSI_MODE_PAGE_0A_LENGTH; 426 427 U32 page_offset = sati_mode_sense_10_translate_data( 428 sequence, identify, scsi_io, data_length 429 ); 430 431 sati_mode_sense_control_translate_data( 432 sequence, scsi_io, identify, page_offset 433 ); 434 } 435 436 /** 437 * @brief This method will perform data translation from the supplied ATA 438 * input data (i.e. an ATA IDENTIFY DEVICE block) into a Power 439 * Condition mode page format. The data will be written 440 * into the user's mode page data buffer. This function operates 441 * specifically for MODE SENSE 10 commands. 442 * For more information on the parameters passed to this method, 443 * please reference sati_translate_data(). 444 * 445 * @return none. 446 */ 447 void sati_mode_sense_10_power_condition_translate_data( 448 SATI_TRANSLATOR_SEQUENCE_T * sequence, 449 void * ata_input_data, 450 void * scsi_io 451 ) 452 { 453 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 454 ata_input_data; 455 456 U8 data_length; 457 U32 page_offset; 458 459 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) 460 + SCSI_MODE_PAGE_1A_LENGTH; 461 462 page_offset = sati_mode_sense_10_translate_data( 463 sequence, identify, scsi_io, data_length 464 ); 465 466 sati_mode_sense_power_condition_translate_data( 467 sequence, scsi_io, identify, page_offset 468 ); 469 } 470 471 472 /** 473 * @brief This method will perform data translation from the supplied ATA 474 * input data (i.e. an ATA IDENTIFY DEVICE block) into an ALL 475 * PAGES mode page format. The ALL PAGES mode page is basically a 476 * conglomeration of all mode pages and sub-pages into a single 477 * page. The data will be written into the user's mode page 478 * data buffer. This function operates specifically for MODE 479 * SENSE 10 commands. 480 * For more information on the parameters passed to this method, 481 * please reference sati_translate_data(). 482 * 483 * @return none. 484 */ 485 void sati_mode_sense_10_all_pages_translate_data( 486 SATI_TRANSLATOR_SEQUENCE_T * sequence, 487 void * ata_input_data, 488 void * scsi_io 489 ) 490 { 491 ATA_IDENTIFY_DEVICE_DATA_T * identify = (ATA_IDENTIFY_DEVICE_DATA_T*) 492 ata_input_data; 493 U8 data_length = (U8) sati_mode_sense_calculate_page_header(scsi_io, 10) 494 + SCSI_MODE_PAGE_01_LENGTH 495 + SCSI_MODE_PAGE_02_LENGTH 496 + SCSI_MODE_PAGE_08_LENGTH 497 + SCSI_MODE_PAGE_0A_LENGTH 498 + SCSI_MODE_PAGE_1C_LENGTH; 499 U32 page_offset = sati_mode_sense_10_translate_data( 500 sequence, identify, scsi_io, data_length 501 ); 502 503 sati_mode_sense_all_pages_translate_data( 504 sequence, scsi_io, identify, page_offset 505 ); 506 } 507 508 #endif // !defined(DISABLE_SATI_MODE_SENSE) 509 510