1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 * 52 * $FreeBSD$ 53 */ 54 /** 55 * @file 56 * @brief This file defines all of the SCSI related constants, enumerations, 57 * and types. Please note that this file does not necessarily contain 58 * an exhaustive list of all constants, commands, sub-commands, etc. 59 */ 60 61 #ifndef _SCSI_H__ 62 #define _SCSI_H__ 63 64 65 //****************************************************************************** 66 //* C O N S T A N T S A N D M A C R O S 67 //****************************************************************************** 68 69 /** 70 * @enum _SCSI_TASK_MGMT_REQUEST_CODES 71 * 72 * @brief This enumberation contains the constants to be used for SCSI task 73 * management request codes. SAM does not specify any particular 74 * values for these codes so constants used here are the same as 75 * those specified in SAS. 76 */ 77 typedef enum _SCSI_TASK_MGMT_REQUEST_CODES 78 { 79 SCSI_TASK_REQUEST_ABORT_TASK = 0x01, 80 SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02, 81 SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04, 82 SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08, 83 SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10, 84 SCSI_TASK_REQUEST_CLEAR_ACA = 0x40, 85 SCSI_TASK_REQUEST_QUERY_TASK = 0x80, 86 SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81, 87 SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82, 88 89 } SCSI_TASK_MGMT_REQUEST_CODES; 90 91 /** 92 * @enum _SCSI_TASK_MGMT_RESPONSE_CODES 93 * 94 * @brief This enumeration contains all of the SCSI task management response 95 * codes. 96 */ 97 typedef enum _SCSI_TASK_MGMT_RESPONSE_CODES 98 { 99 SCSI_TASK_MGMT_FUNC_COMPLETE = 0, 100 SCSI_INVALID_FRAME = 2, 101 SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4, 102 SCSI_TASK_MGMT_FUNC_FAILED = 5, 103 SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8, 104 SCSI_INVALID_LUN = 9 105 } SCSI_TASK_MGMT_RESPONSE_CODES; 106 107 /** 108 * @enum _SCSI_SENSE_RESPONSE_CODE 109 * 110 * @brief this enumeration depicts the types of sense data responses as 111 * per SPC-3. 112 */ 113 typedef enum _SCSI_SENSE_RESPONSE_CODE 114 { 115 SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70, 116 SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71, 117 SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72, 118 SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73 119 120 } SCSI_SENSE_RESPONSE_CODE; 121 122 /** 123 * @enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE 124 * 125 * @brief this enumeration depicts the types of sense data descriptor as 126 * per SPC-4. 127 */ 128 typedef enum _SCSI_SENSE_DATA_DESCRIPTOR_TYPE 129 { 130 SCSI_INFORMATION_DESCRIPTOR_TYPE = 0x00, 131 SCSI_CMD_SPECIFIC_DESCRIPTOR_TYPE = 0x01, 132 SCSI_KEY_SPECIFIC_DESCRIPTOR_TYPE = 0x02, 133 SCSI_FIELD_REPLACEABLE_UNIT_DESCRIPTOR_TYPE = 0x03, 134 SCSI_STREAM_CMD_DESCRIPTOR_TYPE = 0x04, 135 SCSI_BLOCK_DESCRIPTOR_TYPE = 0x05, 136 SCSI_OSD_OBJ_IDENTIFICATION_DESCRIPTOR_TYPE = 0x06, 137 SCSI_OSC_RESPONSE_INTEGRITY_DESCRIPTOR_TYPE = 0x07, 138 SCSI_OSD_ATTR_IDENTIFICATION_DESCRIPTOR_TYPE = 0x08, 139 SCSI_ATA_STATUS_RETURN_DESCRIPTOR_TYPE = 0x09, 140 SCSI_PROGRESS_INDICATION_DESCRIPTOR_TYPE = 0x0a, 141 SCSI_USER_DATA_SEGEMNT_REF_DESCRIPTOR_TYPE = 0x0b 142 } SCSI_SENSE_DATA_DESCRIPTOR_TYPE; 143 144 #define SCSI_CMD_SPECIFIC_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a 145 #define SCSI_CMD_SPECIFIC_DESCRIPTOR_LENGTH 0x0c 146 #define SCSI_INFORMATION_DESCRIPTOR_ADDITIONAL_LENGTH 0x0a 147 #define SCSI_INFORMATION_DESCRIPTOR_LENGTH 0x0c 148 #define SCSI_BLOCK_DESCRIPTOR_ADDITIONAL_LENGTH 0x2 149 #define SCSI_BLOCK_DESCRIPTOR_LENGTH 0x4 150 151 #define SCSI_SENSE_DATA_DESC_BIT 0x01 152 153 // This constant represents the valid bit located in byte 0 of a FIXED 154 // format sense data. 155 #define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80 156 157 #define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18 158 159 // This value is used in the DATAPRES field of the SCSI Response IU. 160 #define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02 161 162 /** 163 * @name SCSI_SENSE_KEYS 164 * 165 * These constants delineate all of the SCSI protocol sense key constants 166 */ 167 /*@{*/ 168 #define SCSI_SENSE_NO_SENSE 0x00 169 #define SCSI_SENSE_RECOVERED_ERROR 0x01 170 #define SCSI_SENSE_NOT_READY 0x02 171 #define SCSI_SENSE_MEDIUM_ERROR 0x03 172 #define SCSI_SENSE_HARDWARE_ERROR 0x04 173 #define SCSI_SENSE_ILLEGAL_REQUEST 0x05 174 #define SCSI_SENSE_UNIT_ATTENTION 0x06 175 #define SCSI_SENSE_DATA_PROTECT 0x07 176 #define SCSI_SENSE_BLANK_CHECK 0x08 177 #define SCSI_SENSE_VENDOR_SPECIFIC 0x09 178 #define SCSI_SENSE_COPY_ABORTED 0x0A 179 #define SCSI_SENSE_ABORTED_COMMAND 0x0B 180 #define SCSI_SENSE_VOLUME_OVERFLOW 0x0D 181 #define SCSI_SENSE_MISCOMPARE 0x0E 182 /*@}*/ 183 184 /** 185 * @name SCSI_ADDITIONAL_SENSE_CODES 186 * 187 * These constants delineate all of the SCSI protocol additional sense 188 * code constants. 189 */ 190 /*@{*/ 191 #define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00 192 #define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04 193 #define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04 194 #define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04 195 #define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05 196 #define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11 197 #define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20 198 #define SCSI_ASC_LBA_OUT_OF_RANGE 0x21 199 #define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24 200 #define SCSI_ASC_LOGICAL_UNIT_NOT_SUPPORTED 0x25 201 #define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26 202 #define SCSI_ASC_WRITE_PROTECTED 0x27 203 #define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28 204 #define SCSI_ASC_MEDIUM_FORMAT_CORRUPTED 0x31 205 #define SCSI_ASC_ENCLOSURE_SERVICES_UNAVAILABLE 0x35 206 #define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39 207 #define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A 208 #define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44 209 #define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47 210 #define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A 211 #define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C 212 #define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 213 #define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D 214 #define SCSI_ASC_POWER_STATE_CHANGE 0x5E 215 #define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40 216 #define SCSI_ASC_LOGICAL_UNIT_FAILED 0x4C 217 #define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67 218 #define SCSI_ASC_MICROCODE_HAS_CHANGED 0x3F 219 /*@}*/ 220 221 /** 222 * @name SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS 223 * 224 * This enumeration contains all of the used SCSI protocol additional 225 * sense code qualifier constants. 226 */ 227 /*@{*/ 228 #define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00 229 #define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00 230 #define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00 231 #define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00 232 #define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00 233 #define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00 234 #define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00 235 #define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00 236 #define SCSI_ASCQ_WRITE_PROTECTED 0x00 237 #define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00 238 #define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00 239 #define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00 240 #define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01 241 #define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02 242 #define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03 243 #define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04 244 #define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09 245 #define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10 246 #define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03 247 #define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04 248 #define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42 249 #define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43 250 #define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B 251 #define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04 252 #define SCSI_ASCQ_ATA_PASS_THROUGH_INFORMATION_AVAILABLE 0x1D 253 #define SCSI_ASCQ_MICROCODE_HAS_CHANGED 0x01 254 /*@}*/ 255 256 /** 257 * @name SCSI_STATUS_CODES 258 * 259 * These constants define all of the used SCSI status values. 260 */ 261 /*@{*/ 262 #define SCSI_STATUS_GOOD 0x00 263 #define SCSI_STATUS_CHECK_CONDITION 0x02 264 #define SCSI_STATUS_CONDITION_MET 0x04 265 #define SCSI_STATUS_BUSY 0x08 266 #define SCSI_STATUS_TASKFULL 0x28 267 #define SCSI_STATUS_ACA 0x30 268 #define SCSI_STATUS_ABORT 0x40 269 /*@}*/ 270 271 /** 272 * @name SCSI_OPERATION_CODES 273 * 274 * These constants delineate all of the SCSI command/operation codes. 275 */ 276 /*@{*/ 277 #define SCSI_INQUIRY 0x12 278 #define SCSI_READ_CAPACITY_10 0x25 279 #define SCSI_SERVICE_ACTION_IN_16 0x9E 280 #define SCSI_TEST_UNIT_READY 0x00 281 #define SCSI_START_STOP_UNIT 0x1B 282 #define SCSI_SYNCHRONIZE_CACHE_10 0x35 283 #define SCSI_SYNCHRONIZE_CACHE_16 0x91 284 #define SCSI_REQUEST_SENSE 0x03 285 #define SCSI_REPORT_LUNS 0xA0 286 #define SCSI_REASSIGN_BLOCKS 0x07 287 #define SCSI_READ_6 0x08 288 #define SCSI_READ_10 0x28 289 #define SCSI_READ_12 0xA8 290 #define SCSI_READ_16 0x88 291 #define SCSI_WRITE_6 0x0A 292 #define SCSI_WRITE_10 0x2A 293 #define SCSI_WRITE_12 0xAA 294 #define SCSI_WRITE_16 0x8A 295 #define SCSI_VERIFY_10 0x2F 296 #define SCSI_VERIFY_12 0xAF 297 #define SCSI_VERIFY_16 0x8F 298 #define SCSI_SEEK_6 0x01 299 #define SCSI_SEEK_10 0x02 300 #define SCSI_WRITE_VERIFY 0x2E 301 #define SCSI_FORMAT_UNIT 0x04 302 #define SCSI_READ_BUFFER 0x3C 303 #define SCSI_WRITE_BUFFER 0x3B 304 #define SCSI_SEND_DIAGNOSTIC 0x1D 305 #define SCSI_RECEIVE_DIAGNOSTIC 0x1C 306 #define SCSI_MODE_SENSE_6 0x1A 307 #define SCSI_MODE_SENSE_10 0x5A 308 #define SCSI_MODE_SELECT_6 0x15 309 #define SCSI_MODE_SELECT_10 0x55 310 #define SCSI_MAINTENANCE_IN 0xA3 311 #define SCSI_LOG_SENSE 0x4D 312 #define SCSI_LOG_SELECT 0x4C 313 #define SCSI_RESERVE_6 0x16 314 #define SCSI_RESERVE_10 0x56 315 #define SCSI_RELEASE_6 0x17 316 #define SCSI_RELEASE_10 0x57 317 #define SCSI_ATA_PASSTHRU_12 0xA1 318 #define SCSI_ATA_PASSTHRU_16 0x85 319 #define SCSI_WRITE_LONG_10 0x3F 320 #define SCSI_WRITE_LONG_16 0x9F 321 #define SCSI_PERSISTENT_RESERVE_IN 0x5E 322 #define SCSI_PERSISTENT_RESERVE_OUT 0x5F 323 #define SCSI_SECURITY_PROTOCOL_IN 0xA2 324 #define SCSI_SECURITY_PROTOCOL_OUT 0xB5 325 #define SCSI_UNMAP 0x42 326 #define SCSI_WRITE_AND_VERIFY_10 0x2E 327 #define SCSI_WRITE_AND_VERIFY_12 0xAE 328 #define SCSI_WRITE_AND_VERIFY_16 0x8E 329 /*@}*/ 330 331 /** 332 * @name SCSI_SERVICE_ACTION_IN_CODES 333 * 334 * Service action in operations. 335 */ 336 /*@{*/ 337 #define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10 338 /*@}*/ 339 340 /** 341 * 342 * Service action mask. 343 */ 344 /*@{*/ 345 #define SCSI_SERVICE_ACTION_MASK 0x1f 346 /*@}*/ 347 348 /** 349 * @name SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES 350 * 351 * MAINTENANCE IN service action codes. 352 */ 353 /*@{*/ 354 #define SCSI_REPORT_TASK_MGMT 0x0D 355 #define SCSI_REPORT_OP_CODES 0x0C 356 /*@}*/ 357 358 /** 359 * @name SCSI_MODE_PAGE_CONTROLS 360 * 361 * These constants delineate all of the used SCSI Mode Page control 362 * values. 363 */ 364 /*@{*/ 365 #define SCSI_MODE_SENSE_PC_CURRENT 0x0 366 #define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1 367 #define SCSI_MODE_SENSE_PC_DEFAULT 0x2 368 #define SCSI_MODE_SENSE_PC_SAVED 0x3 369 /*@}*/ 370 371 #define SCSI_MODE_SENSE_PC_SHIFT 0x06 372 #define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F 373 #define SCSI_MODE_SENSE_DBD_ENABLE 0x08 374 #define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10 375 376 #define SCSI_MODE_PAGE_CONTROL_D_SENSE_DISABLE 0x0 377 #define SCSI_MODE_PAGE_CONTROL_D_SENSE_ENABLE 0x1 378 /** 379 * @name SCSI_MODE_PAGE_CODES 380 * 381 * These constants delineate all of the used SCSI Mode Page codes. 382 */ 383 /*@{*/ 384 #define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01 385 #define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02 386 #define SCSI_MODE_PAGE_CACHING 0x08 387 #define SCSI_MODE_PAGE_CONTROL 0x0A 388 #define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19 389 #define SCSI_MODE_PAGE_POWER_CONDITION 0x1A 390 #define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C 391 #define SCSI_MODE_PAGE_ALL_PAGES 0x3F 392 /*@}*/ 393 394 #define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF 395 #define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0 396 #define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1 397 #define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04 398 #define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20 399 #define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08 400 #define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10 401 #define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1 402 #define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2 403 404 #define SCSI_MODE_SENSE_6_HEADER_LENGTH 4 405 #define SCSI_MODE_SENSE_10_HEADER_LENGTH 8 406 #define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8 407 #define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16 408 409 #define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08 410 #define SCSI_MODE_PAGE_19_SAS_ID 0x6 411 #define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1 412 #define SCSI_MODE_PAGE_19_SUB1_PC 0x59 413 414 #define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00 415 416 //Mode Select constrains related masks value 417 #define SCSI_MODE_SELECT_PF_BIT 0x1 418 #define SCSI_MODE_SELECT_PF_MASK 0x10 419 #define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6 420 #define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F 421 #define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40 422 #define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80 423 #define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40 424 #define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F 425 #define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1 426 #define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84 427 #define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1 428 #define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xE0 429 #define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38 430 #define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47 431 #define SCSI_MODE_SELECT_MODE_PAGE_D_SENSE 0x4 432 433 #define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04 434 #define SCSI_MOVE_FUA_BIT_ENABLE 0x08 435 #define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01 436 #define SCSI_READ_CAPACITY_10_DATA_LENGTH 8 437 #define SCSI_READ_CAPACITY_16_DATA_LENGTH 32 438 439 // Inquiry constants 440 #define SCSI_INQUIRY_EVPD_ENABLE 0x01 441 #define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02 442 #define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00 443 #define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80 444 #define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83 445 #define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89 446 #define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1 447 #define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C 448 #define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 //36 449 450 #define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC //252 451 452 /** Defines the log page codes that are use in gathing Smart data 453 */ 454 #define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00 455 #define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F 456 #define SCSI_LOG_PAGE_SELF_TEST 0x10 457 458 /** 459 * @name SCSI_INQUIRY_VPD 460 * 461 * The following are constants used with vital product data inquiry pages. 462 * Values are already shifted into the proper nibble location. 463 */ 464 /*@{*/ 465 #define SCSI_PIV_ENABLE 0x80 466 #define SCSI_LUN_ASSOCIATION 0x00 467 #define SCSI_TARGET_PORT_ASSOCIATION 0x10 468 469 #define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00 470 #define SCSI_NAA_IDENTIFIER_TYPE 0x03 471 472 #define SCSI_T10_IDENTIFIER_TYPE 0x01 473 #define SCSI_BINARY_CODE_SET 0x01 474 #define SCSI_ASCII_CODE_SET 0x02 475 #define SCSI_FC_PROTOCOL_IDENTIFIER 0x00 476 #define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60 477 /*@}*/ 478 479 #define SCSI_VERIFY_BYTCHK_ENABLED 0x02 480 481 #define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02 482 /** 483 * @name SCSI_START_STOP_UNIT_POWER_CONDITION_CODES 484 * 485 * The following are SCSI Start Stop Unit command Power Condition codes. 486 */ 487 /*@{*/ 488 #define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0 489 #define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1 490 #define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2 491 #define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3 492 #define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7 493 #define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB 494 /*@}*/ 495 496 #define SCSI_START_STOP_UNIT_IMMED_MASK 0x1 497 #define SCSI_START_STOP_UNIT_IMMED_SHIFT 0 498 499 #define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1 500 #define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0 501 502 #define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2 503 #define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1 504 505 #define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4 506 #define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2 507 508 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF 509 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0 510 511 #define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0 512 #define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4 513 514 #define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0 515 #define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6 516 517 #define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F 518 #define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0 519 520 /** 521 * @name MRIE - Method of reporting informational exceptions codes 522 */ 523 /*@{*/ 524 #define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0 525 #define ASYNCHRONOUS_EVENT_REPORTING 0x1 526 #define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2 527 #define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3 528 #define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4 529 #define GENERATE_NO_SENSE 0x5 530 #define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6 531 /*@}*/ 532 533 #define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08 534 535 //Reassign Blocks masks 536 #define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02 537 #define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01 538 539 #endif // _SCSI_H_ 540 541