1 /*- 2 * This file is provided under a dual BSD/GPLv2 license. When using or 3 * redistributing this file, you may do so under either license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of version 2 of the GNU General Public License as 11 * published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 16 * General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 21 * The full GNU General Public License is included in this distribution 22 * in the file called LICENSE.GPL. 23 * 24 * BSD LICENSE 25 * 26 * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. 27 * All rights reserved. 28 * 29 * Redistribution and use in source and binary forms, with or without 30 * modification, are permitted provided that the following conditions 31 * are met: 32 * 33 * * Redistributions of source code must retain the above copyright 34 * notice, this list of conditions and the following disclaimer. 35 * * Redistributions in binary form must reproduce the above copyright 36 * notice, this list of conditions and the following disclaimer in 37 * the documentation and/or other materials provided with the 38 * distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 41 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 42 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 43 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 44 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 45 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 46 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 47 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 48 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 49 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 50 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 51 * 52 * $FreeBSD$ 53 */ 54 #ifndef _INTEL_SAS_H_ 55 #define _INTEL_SAS_H_ 56 57 /** 58 * @file 59 * 60 * @brief This file contains all of the definitions relating to structures, 61 * constants, etc. defined by the SAS specification. 62 */ 63 64 #include <dev/isci/types.h> 65 #include <dev/isci/scil/intel_sata.h> 66 #include <dev/isci/scil/intel_scsi.h> 67 68 /** 69 * @struct SCI_SAS_ADDRESS 70 * @brief This structure depicts how a SAS address is represented by SCI. 71 */ 72 typedef struct SCI_SAS_ADDRESS 73 { 74 /** 75 * This member contains the higher 32-bits of the SAS address. 76 */ 77 U32 high; 78 79 /** 80 * This member contains the lower 32-bits of the SAS address. 81 */ 82 U32 low; 83 84 } SCI_SAS_ADDRESS_T; 85 86 /** 87 * @struct SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS 88 * @brief This structure depicts the contents of bytes 2 and 3 in the 89 * SAS IDENTIFY ADDRESS FRAME (IAF). 90 * @note For specific information on each of these 91 * individual fields please reference the SAS specification 92 * Link layer section on address frames. 93 */ 94 typedef struct SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS 95 { 96 union 97 { 98 struct 99 { 100 U16 restricted1 : 1; 101 U16 smp_initiator : 1; 102 U16 stp_initiator : 1; 103 U16 ssp_initiator : 1; 104 U16 reserved3 : 4; 105 U16 restricted2 : 1; 106 U16 smp_target : 1; 107 U16 stp_target : 1; 108 U16 ssp_target : 1; 109 U16 reserved4 : 4; 110 } bits; 111 112 U16 all; 113 } u; 114 115 } SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS_T; 116 117 /** 118 * @struct SCI_SAS_IDENTIFY_ADDRESS_FRAME 119 * @brief This structure depicts the contents of the SAS IDENTIFY ADDRESS 120 * FRAME (IAF). 121 * @note For specific information on each of these 122 * individual fields please reference the SAS specification 123 * Link layer section on address frames. 124 */ 125 typedef struct SCI_SAS_IDENTIFY_ADDRESS_FRAME 126 { 127 U16 address_frame_type : 4; 128 U16 device_type : 3; 129 U16 reserved1 : 1; 130 U16 reason : 4; 131 U16 reserved2 : 4; 132 133 SCI_SAS_IDENTIFY_ADDRESS_FRAME_PROTOCOLS_T protocols; 134 135 SCI_SAS_ADDRESS_T device_name; 136 SCI_SAS_ADDRESS_T sas_address; 137 138 U32 phy_identifier : 8; 139 U32 break_reply_capable : 1; 140 U32 requested_in_zpsds : 1; 141 U32 in_zpsds_persistent : 1; 142 U32 reserved5 : 21; 143 144 U32 reserved6[4]; 145 146 } SCI_SAS_IDENTIFY_ADDRESS_FRAME_T; 147 148 /** 149 * @struct SAS_CAPABILITIES 150 * @brief This structure depicts the various SAS capabilities supported 151 * by the directly attached target device. For specific information 152 * on each of these individual fields please reference the SAS 153 * specification Phy layer section on speed negotiation windows. 154 */ 155 typedef struct SAS_CAPABILITIES 156 { 157 union 158 { 159 #if defined (SCIC_SDS_4_ENABLED) 160 struct 161 { 162 /** 163 * The SAS specification indicates the start bit shall always be set to 164 * 1. This implementation will have the start bit set to 0 if the 165 * PHY CAPABILITIES were either not received or speed negotiation failed. 166 */ 167 U32 start : 1; 168 U32 tx_ssc_type : 1; 169 U32 reserved1 : 2; 170 U32 requested_logical_link_rate : 4; 171 172 U32 gen1_without_ssc_supported : 1; 173 U32 gen1_with_ssc_supported : 1; 174 U32 gen2_without_ssc_supported : 1; 175 U32 gen2_with_ssc_supported : 1; 176 U32 gen3_without_ssc_supported : 1; 177 U32 gen3_with_ssc_supported : 1; 178 U32 reserved2 : 17; 179 U32 parity : 1; 180 } bits; 181 #endif // (SCIC_SDS_4_ENABLED) 182 183 U32 all; 184 } u; 185 186 } SAS_CAPABILITIES_T; 187 188 /** 189 * @enum _SCI_SAS_LINK_RATE 190 * @brief This enumeration depicts the SAS specification defined link speeds. 191 */ 192 typedef enum _SCI_SAS_LINK_RATE 193 { 194 SCI_SAS_NO_LINK_RATE = 0, 195 SCI_SATA_SPINUP_HOLD = 0x3, 196 SCI_SAS_150_GB = 0x8, 197 SCI_SAS_300_GB = 0x9, 198 SCI_SAS_600_GB = 0xA 199 } SCI_SAS_LINK_RATE; 200 201 /** 202 * @enum _SCI_SAS_TASK_ATTRIBUTE 203 * @brief This enumeration depicts the SAM/SAS specification defined task 204 * attribute values for a command information unit. 205 */ 206 typedef enum _SCI_SAS_TASK_ATTRIBUTE 207 { 208 SCI_SAS_SIMPLE_ATTRIBUTE = 0, 209 SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1, 210 SCI_SAS_ORDERED_ATTRIBUTE = 2, 211 SCI_SAS_ACA_ATTRIBUTE = 4, 212 } SCI_SAS_TASK_ATTRIBUTE; 213 214 /** 215 * @enum _SCI_SAS_TASK_MGMT_FUNCTION 216 * @brief This enumeration depicts the SAM/SAS specification defined task 217 * management functions. 218 * @note This HARD_RESET function listed here is not actually defined 219 * as a task management function in the industry standard. 220 */ 221 typedef enum _SCI_SAS_TASK_MGMT_FUNCTION 222 { 223 SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK, 224 SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET, 225 SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET, 226 SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET, 227 SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET, 228 SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA, 229 SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK, 230 SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET, 231 SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION, 232 SCI_SAS_HARD_RESET = 0xFF 233 } SCI_SAS_TASK_MGMT_FUNCTION_T; 234 235 236 /** 237 * @enum _SCI_SAS_FRAME_TYPE 238 * @brief This enumeration depicts the SAS specification defined SSP frame 239 * types. 240 */ 241 typedef enum _SCI_SAS_FRAME_TYPE 242 { 243 SCI_SAS_DATA_FRAME = 0x01, 244 SCI_SAS_XFER_RDY_FRAME = 0x05, 245 SCI_SAS_COMMAND_FRAME = 0x06, 246 SCI_SAS_RESPONSE_FRAME = 0x07, 247 SCI_SAS_TASK_FRAME = 0x16 248 } SCI_SAS_FRAME_TYPE_T; 249 250 251 /** 252 * @struct SCI_SSP_COMMAND_IU 253 * @brief This structure depicts the contents of the SSP COMMAND 254 * INFORMATION UNIT. For specific information on each of these 255 * individual fields please reference the SAS specification SSP 256 * transport layer section. 257 */ 258 typedef struct SCI_SSP_COMMAND_IU 259 { 260 261 U32 lun[2]; 262 263 U32 additional_cdb_length : 6; 264 U32 reserved0 : 2; 265 U32 reserved1 : 8; 266 U32 enable_first_burst : 1; 267 U32 task_priority : 4; 268 U32 task_attribute : 3; 269 U32 reserved2 : 8; 270 271 U32 cdb[4]; 272 273 } SCI_SSP_COMMAND_IU_T; 274 275 /** 276 * @struct SCI_SSP_TASK_IU 277 * @brief This structure depicts the contents of the SSP TASK INFORMATION 278 * UNIT. For specific information on each of these individual fields 279 * please reference the SAS specification SSP transport layer 280 * section. 281 */ 282 typedef struct SCI_SSP_TASK_IU 283 { 284 U32 lun_upper; 285 U32 lun_lower; 286 287 U32 reserved0 : 8; 288 U32 task_function : 8; 289 U32 reserved1 : 8; 290 U32 reserved2 : 8; 291 292 U32 reserved3 : 16; 293 U32 task_tag : 16; 294 295 U32 reserved4[3]; 296 297 } SCI_SSP_TASK_IU_T; 298 299 #define SSP_RESPONSE_IU_MAX_DATA 64 300 301 #define SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK (0x03) 302 303 /** 304 * @struct SCI_SSP_RESPONSE_IU 305 * @brief This structure depicts the contents of the SSP RESPONSE 306 * INFORMATION UNIT. For specific information on each of these 307 * individual fields please reference the SAS specification SSP 308 * transport layer section. 309 */ 310 typedef struct SCI_SSP_RESPONSE_IU 311 { 312 U8 reserved0[8]; 313 314 U8 retry_delay_timer[2]; 315 U8 data_present; 316 U8 status; 317 318 U8 reserved1[4]; 319 U8 sense_data_length[4]; 320 U8 response_data_length[4]; 321 322 U32 data[SSP_RESPONSE_IU_MAX_DATA]; 323 324 } SCI_SSP_RESPONSE_IU_T; 325 326 /** 327 * @enum _SCI_SAS_DATA_PRESENT_TYPE 328 * @brief This enumeration depicts the SAS specification defined SSP data present 329 * types in SCI_SSP_RESPONSE_IU. 330 */ 331 typedef enum _SCI_SSP_RESPONSE_IU_DATA_PRESENT_TYPE 332 { 333 SCI_SSP_RESPONSE_IU_NO_DATA = 0x00, 334 SCI_SSP_RESPONSE_IU_RESPONSE_DATA = 0x01, 335 SCI_SSP_RESPONSE_IU_SENSE_DATA = 0x02 336 } SCI_SSP_RESPONSE_IU_DATA_PRESENT_TYPE_T; 337 338 /** 339 * @struct SCI_SSP_FRAME_HEADER 340 * 341 * @brief This structure depicts the contents of an SSP frame header. For 342 * specific information on the individual fields please reference 343 * the SAS specification transport layer SSP frame format. 344 */ 345 typedef struct SCI_SSP_FRAME_HEADER 346 { 347 // Word 0 348 U32 hashed_destination_address :24; 349 U32 frame_type : 8; 350 351 // Word 1 352 U32 hashed_source_address :24; 353 U32 reserved1_0 : 8; 354 355 // Word 2 356 U32 reserved2_2 : 6; 357 U32 fill_bytes : 2; 358 U32 reserved2_1 : 3; 359 U32 tlr_control : 2; 360 U32 retry_data_frames : 1; 361 U32 retransmit : 1; 362 U32 changing_data_pointer : 1; 363 U32 reserved2_0 :16; 364 365 // Word 3 366 U32 uiResv4; 367 368 // Word 4 369 U16 target_port_transfer_tag; 370 U16 tag; 371 372 // Word 5 373 U32 data_offset; 374 375 } SCI_SSP_FRAME_HEADER_T; 376 377 /** 378 * @struct SMP_REQUEST_HEADER 379 * @brief This structure defines the contents of an SMP Request header. 380 * @note For specific information on each of these 381 * individual fields please reference the SAS specification. 382 */ 383 typedef struct SMP_REQUEST_HEADER 384 { 385 U8 smp_frame_type; // byte 0 386 U8 function; // byte 1 387 U8 allocated_response_length; // byte 2 388 U8 request_length; // byte 3 389 } SMP_REQUEST_HEADER_T; 390 391 /** 392 * @struct SMP_RESPONSE_HEADER 393 * @brief This structure depicts the contents of the SAS SMP DISCOVER 394 * RESPONSE frame. For specific information on each of these 395 * individual fields please reference the SAS specification Link 396 * layer section on address frames. 397 */ 398 typedef struct SMP_RESPONSE_HEADER 399 { 400 U8 smp_frame_type; // byte 0 401 U8 function; // byte 1 402 U8 function_result; // byte 2 403 U8 response_length; // byte 3 404 } SMP_RESPONSE_HEADER_T; 405 406 /** 407 * @struct SMP_REQUEST_GENERAL 408 * @brief This structure defines the contents of an SMP Request that 409 * is comprised of the SMP_REQUEST_HEADER and a CRC. 410 * @note For specific information on each of these 411 * individual fields please reference the SAS specification. 412 */ 413 typedef struct SMP_REQUEST_GENERAL 414 { 415 U32 crc; // bytes 4-7 416 417 } SMP_REQUEST_GENERAL_T; 418 419 /** 420 * @struct SMP_REQUEST_PHY_IDENTIFIER 421 * @brief This structure defines the contents of an SMP Request that 422 * is comprised of the SMP_REQUEST_HEADER and a phy identifier. 423 * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. 424 * @note For specific information on each of these 425 * individual fields please reference the SAS specification. 426 */ 427 typedef struct SMP_REQUEST_PHY_IDENTIFIER 428 { 429 U32 reserved_byte4_7; // bytes 4-7 430 431 U32 ignore_zone_group:1; // byte 8 432 U32 reserved_byte8:7; 433 434 U32 phy_identifier:8; // byte 9 435 U32 reserved_byte10:8; // byte 10 436 U32 reserved_byte11:8; // byte 11 437 438 } SMP_REQUEST_PHY_IDENTIFIER_T; 439 440 /** 441 * @struct SMP_REQUEST_CONFIGURE_ROUTE_INFORMATION 442 * @brief This structure defines the contents of an SMP Configure Route 443 * Information request. 444 * @note For specific information on each of these 445 * individual fields please reference the SAS specification. 446 */ 447 typedef struct SMP_REQUEST_CONFIGURE_ROUTE_INFORMATION 448 { 449 U32 expected_expander_change_count:16; // bytes 4-5 450 U32 expander_route_index_high:8; 451 U32 expander_route_index:8; // bytes 6-7 452 453 U32 reserved_byte8:8; // bytes 8 454 U32 phy_identifier:8; // bytes 9 455 U32 reserved_byte_10_11:16; // bytes 10-11 456 457 U32 reserved_byte_12_bit_0_6:7; 458 U32 disable_route_entry:1; // byte 12 459 U32 reserved_byte_13_15:24; // bytes 13-15 460 461 U32 routed_sas_address[2]; // bytes 16-23 462 U8 reserved_byte_24_39[16]; // bytes 24-39 463 464 } SMP_REQUEST_CONFIGURE_ROUTE_INFORMATION_T; 465 466 /** 467 * @struct SMP_REQUEST_PHY_CONTROL 468 * @brief This structure defines the contents of an SMP Phy Controller 469 * request. 470 * @note For specific information on each of these 471 * individual fields please reference the SAS specification. 472 */ 473 typedef struct SMP_REQUEST_PHY_CONTROL 474 { 475 U16 expected_expander_change_count; // byte 4-5 476 477 U16 reserved_byte_6_7; // byte 6-7 478 U8 reserved_byte_8; // byte 8 479 480 U8 phy_identifier; // byte 9 481 U8 phy_operation; // byte 10 482 483 U8 update_partial_pathway_timeout_value:1; 484 U8 reserved_byte_11_bit_1_7:7; // byte 11 485 486 U8 reserved_byte_12_23[12]; // byte 12-23 487 488 U8 attached_device_name[8]; // byte 24-31 489 490 U8 reserved_byte_32_bit_3_0:4; // byte 32 491 U8 programmed_minimum_physical_link_rate:4; 492 493 U8 reserved_byte_33_bit_3_0:4; // byte 33 494 U8 programmed_maximum_physical_link_rate:4; 495 496 U16 reserved_byte_34_35; // byte 34-35 497 498 U8 partial_pathway_timeout_value:4; 499 U8 reserved_byte_36_bit_4_7:4; // byte 36 500 501 U16 reserved_byte_37_38; // byte 37-38 502 U8 reserved_byte_39; // byte 39 503 504 } SMP_REQUEST_PHY_CONTROL_T; 505 506 /** 507 * @struct SMP_REQUEST_VENDOR_SPECIFIC 508 * @brief This structure depicts the vendor specific space for SMP request. 509 */ 510 #define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016 511 typedef struct SMP_REQUEST_VENDOR_SPECIFIC 512 { 513 U8 request_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; 514 }SMP_REQUEST_VENDOR_SPECIFIC_T; 515 516 /** 517 * @struct SMP_REQUEST 518 * @brief This structure simply unionizes the existing request 519 * structures into a common request type. 520 */ 521 typedef struct _SMP_REQUEST 522 { 523 SMP_REQUEST_HEADER_T header; 524 525 union 526 { // bytes 4-N 527 SMP_REQUEST_GENERAL_T report_general; 528 SMP_REQUEST_PHY_IDENTIFIER_T discover; 529 SMP_REQUEST_GENERAL_T report_manufacturer_information; 530 SMP_REQUEST_PHY_IDENTIFIER_T report_phy_sata; 531 SMP_REQUEST_PHY_CONTROL_T phy_control; 532 SMP_REQUEST_PHY_IDENTIFIER_T report_phy_error_log; 533 SMP_REQUEST_PHY_IDENTIFIER_T report_route_information; 534 SMP_REQUEST_CONFIGURE_ROUTE_INFORMATION_T configure_route_information; 535 SMP_REQUEST_VENDOR_SPECIFIC_T vendor_specific_request; 536 } request; 537 538 } SMP_REQUEST_T; 539 540 541 /** 542 * @struct SMP_RESPONSE_REPORT_GENERAL 543 * @brief This structure depicts the SMP Report General for 544 * expander devices. It adheres to the SAS-2.1 specification. 545 * @note For specific information on each of these 546 * individual fields please reference the SAS specification 547 * Application layer section on SMP. 548 */ 549 typedef struct SMP_RESPONSE_REPORT_GENERAL 550 { 551 U16 expander_change_count; //byte 4-5 552 U16 expander_route_indexes; //byte 6-7 553 554 U32 reserved_byte8:7; //byte 8 bit 0-6 555 U32 long_response:1; //byte 8 bit 7 556 557 U32 number_of_phys:8; //byte 9 558 559 U32 configurable_route_table:1; //byte 10 560 U32 configuring:1; 561 U32 configures_others:1; 562 U32 open_reject_retry_supported:1; 563 U32 stp_continue_awt:1; 564 U32 self_configuring:1; 565 U32 zone_configuring:1; 566 U32 table_to_table_supported:1; 567 568 U32 reserved_byte11:8; //byte 11 569 570 U32 enclosure_logical_identifier_high; //byte 12-15 571 U32 enclosure_logical_identifier_low; //byte 16-19 572 573 U32 reserved_byte20_23; 574 U32 reserved_byte24_27; 575 576 } SMP_RESPONSE_REPORT_GENERAL_T; 577 578 typedef struct SMP_RESPONSE_REPORT_GENERAL_LONG 579 { 580 SMP_RESPONSE_REPORT_GENERAL_T sas1_1; 581 582 struct 583 { 584 U16 reserved1; 585 U16 stp_bus_inactivity_time_limit; 586 U16 stp_max_connect_time_limit; 587 U16 stp_smp_i_t_nexus_loss_time; 588 589 U32 zoning_enabled : 1; 590 U32 zoning_supported : 1; 591 U32 physicaL_presence_asserted : 1; 592 U32 zone_locked : 1; 593 U32 reserved2 : 1; 594 U32 num_zone_groups : 3; 595 U32 saving_zoning_enabled_supported : 3; 596 U32 saving_zone_perms_table_supported : 1; 597 U32 saving_zone_phy_info_supported : 1; 598 U32 saving_zone_manager_password_supported : 1; 599 U32 saving : 1; 600 U32 reserved3 : 1; 601 U32 max_number_routed_sas_addresses : 16; 602 603 SCI_SAS_ADDRESS_T active_zone_manager_sas_address; 604 605 U16 zone_lock_inactivity_time_limit; 606 U16 reserved4; 607 608 U8 reserved5; 609 U8 first_enclosure_connector_element_index; 610 U8 number_of_enclosure_connector_element_indices; 611 U8 reserved6; 612 613 U32 reserved7 : 7; 614 U32 reduced_functionality : 1; 615 U32 time_to_reduce_functionality : 8; 616 U32 initial_time_to_reduce_functionality : 8; 617 U8 max_reduced_functionality_time; 618 619 U16 last_self_config_status_descriptor_index; 620 U16 max_number_of_stored_self_config_status_descriptors; 621 622 U16 last_phy_event_list_descriptor_index; 623 U16 max_number_of_stored_phy_event_list_descriptors; 624 } sas2; 625 626 } SMP_RESPONSE_REPORT_GENERAL_LONG_T; 627 628 /** 629 * @struct SMP_RESPONSE_REPORT_MANUFACTURER_INFORMATION 630 * @brief This structure depicts the SMP report manufacturer 631 * information for expander devices. It adheres to the 632 * SAS-2.1 specification. 633 * @note For specific information on each of these 634 * individual fields please reference the SAS specification 635 * Application layer section on SMP. 636 */ 637 typedef struct SMP_RESPONSE_REPORT_MANUFACTURER_INFORMATION 638 { 639 U32 expander_change_count : 16; // bytes 4-5 640 U32 reserved1 : 16; 641 642 U32 sas1_1_format : 1; 643 U32 reserved2 : 31; 644 645 U8 vendor_id[8]; 646 U8 product_id[16]; 647 U8 product_revision_level[4]; 648 U8 component_vendor_id[8]; 649 U8 component_id[2]; 650 U8 component_revision_level; 651 U8 reserved3; 652 U8 vendor_specific[8]; 653 654 } SMP_RESPONSE_REPORT_MANUFACTURER_INFORMATION_T; 655 656 #define SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE 52 657 #define SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE 116 658 659 /** 660 * @struct SMP_DISCOVER_RESPONSE_PROTOCOLS 661 * @brief This structure depicts the discover response where the 662 * supported protocols by the remote phy are specified. 663 * @note For specific information on each of these 664 * individual fields please reference the SAS specification 665 * Link layer section on address frames. 666 */ 667 typedef struct SMP_DISCOVER_RESPONSE_PROTOCOLS 668 { 669 union 670 { 671 struct 672 { 673 U16 attached_sata_host : 1; 674 U16 attached_smp_initiator : 1; 675 U16 attached_stp_initiator : 1; 676 U16 attached_ssp_initiator : 1; 677 U16 reserved3 : 4; 678 U16 attached_sata_device : 1; 679 U16 attached_smp_target : 1; 680 U16 attached_stp_target : 1; 681 U16 attached_ssp_target : 1; 682 U16 reserved4 : 3; 683 U16 attached_sata_port_selector : 1; 684 } bits; 685 686 U16 all; 687 } u; 688 689 } SMP_DISCOVER_RESPONSE_PROTOCOLS_T; 690 691 /** 692 * @struct SMP_RESPONSE_DISCOVER_FORMAT 693 * @brief This structure defines the SMP phy discover response format. 694 * It handles both SAS1.1 and SAS 2 definitions. The unions 695 * indicate locations where the SAS specification versions 696 * differ from one another. 697 */ 698 typedef struct SMP_RESPONSE_DISCOVER 699 { 700 701 union 702 { 703 struct 704 { 705 U8 reserved[2]; 706 } sas1_1; 707 708 struct 709 { 710 U16 expander_change_count; 711 } sas2; 712 713 } u1; 714 715 U8 reserved1[3]; 716 U8 phy_identifier; 717 U8 reserved2[2]; 718 719 union 720 { 721 struct 722 { 723 U16 reserved1 : 4; 724 U16 attached_device_type : 3; 725 U16 reserved2 : 1; 726 U16 negotiated_physical_link_rate : 4; 727 U16 reserved3 : 4; 728 } sas1_1; 729 730 struct 731 { 732 U16 attached_reason : 4; 733 U16 attached_device_type : 3; 734 U16 reserved2 : 1; 735 U16 negotiated_logical_link_rate : 4; 736 U16 reserved3 : 4; 737 } sas2; 738 739 } u2; 740 741 SMP_DISCOVER_RESPONSE_PROTOCOLS_T protocols; 742 SCI_SAS_ADDRESS_T sas_address; 743 SCI_SAS_ADDRESS_T attached_sas_address; 744 745 U8 attached_phy_identifier; 746 747 union 748 { 749 struct 750 { 751 U8 reserved; 752 } sas1_1; 753 754 struct 755 { 756 U8 attached_break_reply_capable : 1; 757 U8 attached_requested_inside_zpsds : 1; 758 U8 attached_inside_zpsds_persistent : 1; 759 U8 reserved1 : 5; 760 } sas2; 761 762 } u3; 763 764 U8 reserved_for_identify[6]; 765 766 U32 hardware_min_physical_link_rate : 4; 767 U32 programmed_min_physical_link_rate : 4; 768 U32 hardware_max_physical_link_rate : 4; 769 U32 programmed_max_physical_link_rate : 4; 770 U32 phy_change_count : 8; 771 U32 partial_pathway_timeout_value : 4; 772 U32 reserved5 : 3; 773 U32 virtual_phy : 1; 774 775 U32 routing_attribute : 4; 776 U32 reserved6 : 4; 777 U32 connector_type : 7; 778 U32 reserved7 : 1; 779 U32 connector_element_index : 8; 780 U32 connector_physical_link : 8; 781 782 U16 reserved8; 783 U16 vendor_specific; 784 785 union 786 { 787 struct 788 { 789 /** 790 * In the SAS 1.1 specification this structure ends after 52 bytes. 791 * As a result, the contents of this field should never have a 792 * real value. It is undefined. 793 */ 794 U8 undefined[SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE 795 - SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE]; 796 } sas1_1; 797 798 struct 799 { 800 SCI_SAS_ADDRESS_T attached_device_name; 801 802 U32 zoning_enabled : 1; 803 U32 inside_zpsds : 1; 804 U32 zone_group_persistent : 1; 805 U32 reserved1 : 1; 806 U32 requested_inside_zpsds : 1; 807 U32 inside_zpsds_persistent : 1; 808 U32 requested_inside_zpsds_changed_by_expander : 1; 809 U32 reserved2 : 1; 810 U32 reserved_for_zoning_fields : 16; 811 U32 zone_group : 8; 812 813 U8 self_configuration_status; 814 U8 self_configuration_levels_completed; 815 U16 reserved_for_self_config_fields; 816 817 SCI_SAS_ADDRESS_T self_configuration_sas_address; 818 819 U32 programmed_phy_capabilities; 820 U32 current_phy_capabilities; 821 U32 attached_phy_capabilities; 822 823 U32 reserved3; 824 825 U32 reserved4 : 16; 826 U32 negotiated_physical_link_rate : 4; 827 U32 reason : 4; 828 U32 hardware_muxing_supported : 1; 829 U32 negotiated_ssc : 1; 830 U32 reserved5 : 6; 831 832 U32 default_zoning_enabled : 1; 833 U32 reserved6 : 1; 834 U32 default_zone_group_persistent : 1; 835 U32 reserved7 : 1; 836 U32 default_requested_inside_zpsds : 1; 837 U32 default_inside_zpsds_persistent : 1; 838 U32 reserved8 : 2; 839 U32 reserved9 : 16; 840 U32 default_zone_group : 8; 841 842 U32 saved_zoning_enabled : 1; 843 U32 reserved10 : 1; 844 U32 saved_zone_group_persistent : 1; 845 U32 reserved11 : 1; 846 U32 saved_requested_inside_zpsds : 1; 847 U32 saved_inside_zpsds_persistent : 1; 848 U32 reserved12 : 18; 849 U32 saved_zone_group : 8; 850 851 U32 reserved14 : 2; 852 U32 shadow_zone_group_persistent : 1; 853 U32 reserved15 : 1; 854 U32 shadow_requested_inside_zpsds : 1; 855 U32 shadow_inside_zpsds_persistent : 1; 856 U32 reserved16 : 18; 857 U32 shadow_zone_group : 8; 858 859 U8 device_slot_number; 860 U8 device_slot_group_number; 861 U8 device_slot_group_output_connector[6]; 862 } sas2; 863 864 } u4; 865 866 } SMP_RESPONSE_DISCOVER_T; 867 868 /** 869 * @struct SMP_RESPONSE_REPORT_PHY_SATA 870 * @brief This structure depicts the contents of the SAS SMP REPORT 871 * PHY SATA frame. For specific information on each of these 872 * individual fields please reference the SAS specification Link 873 * layer section on address frames. 874 */ 875 typedef struct SMP_RESPONSE_REPORT_PHY_SATA 876 { 877 U32 ignored_byte_4_7; // bytes 4-7 878 879 U32 affiliations_valid:1; 880 U32 affiliations_supported:1; 881 U32 reserved_byte11:6; // byte 11 882 U32 ignored_byte10:8; // byte 10 883 U32 phy_identifier:8; // byte 9 884 U32 reserved_byte_8:8; // byte 8 885 886 U32 reserved_12_15; 887 U32 stp_sas_address[2]; 888 U8 device_to_host_fis[20]; 889 U32 reserved_44_47; 890 U32 affiliated_stp_initiator_sas_address[2]; 891 892 } SMP_RESPONSE_REPORT_PHY_SATA_T; 893 894 typedef struct SMP_RESPONSE_VENDOR_SPECIFIC 895 { 896 U8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH]; 897 }SMP_RESPONSE_VENDOR_SPECIFIC_T; 898 899 typedef union SMP_RESPONSE_BODY 900 { 901 SMP_RESPONSE_REPORT_GENERAL_T report_general; 902 SMP_RESPONSE_REPORT_MANUFACTURER_INFORMATION_T report_manufacturer_information; 903 SMP_RESPONSE_DISCOVER_T discover; 904 SMP_RESPONSE_REPORT_PHY_SATA_T report_phy_sata; 905 SMP_RESPONSE_VENDOR_SPECIFIC_T vendor_specific_response; 906 } SMP_RESPONSE_BODY_T; 907 908 /** 909 * @struct SMP_RESPONSE 910 * @brief This structure simply unionizes the existing response 911 * structures into a common response type. 912 */ 913 typedef struct _SMP_RESPONSE 914 { 915 SMP_RESPONSE_HEADER_T header; 916 917 SMP_RESPONSE_BODY_T response; 918 919 } SMP_RESPONSE_T; 920 921 // SMP Request Functions 922 #define SMP_FUNCTION_REPORT_GENERAL 0x00 923 #define SMP_FUNCTION_REPORT_MANUFACTURER_INFORMATION 0x01 924 #define SMP_FUNCTION_DISCOVER 0x10 925 #define SMP_FUNCTION_REPORT_PHY_ERROR_LOG 0x11 926 #define SMP_FUNCTION_REPORT_PHY_SATA 0x12 927 #define SMP_FUNCTION_REPORT_ROUTE_INFORMATION 0X13 928 #define SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION 0X90 929 #define SMP_FUNCTION_PHY_CONTROL 0x91 930 #define SMP_FUNCTION_PHY_TEST 0x92 931 932 #define SMP_FRAME_TYPE_REQUEST 0x40 933 #define SMP_FRAME_TYPE_RESPONSE 0x41 934 935 #define PHY_OPERATION_NOP 0x00 936 #define PHY_OPERATION_LINK_RESET 0x01 937 #define PHY_OPERATION_HARD_RESET 0x02 938 #define PHY_OPERATION_DISABLE 0x03 939 #define PHY_OPERATION_CLEAR_ERROR_LOG 0x05 940 #define PHY_OPERATION_CLEAR_AFFILIATION 0x06 941 942 #define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00 943 #define NPLR_PHY_DISABLED 0x01 944 #define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02 945 #define NPLR_PHY_ENABLED_SATA_HOLD 0x03 946 #define NPLR_PHY_ENABLED_1_5G 0x08 947 #define NPLR_PHY_ENABLED_3_0G 0x09 948 949 // SMP Function Result values. 950 #define SMP_RESULT_FUNCTION_ACCEPTED 0x00 951 #define SMP_RESULT_UNKNOWN_FUNCTION 0x01 952 #define SMP_RESULT_FUNCTION_FAILED 0x02 953 #define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03 954 #define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04 955 #define SMP_RESULT_BUSY 0x05 956 #define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06 957 #define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10 958 #define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11 959 #define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12 960 #define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13 961 #define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14 962 #define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15 963 #define SMP_RESULT_PHY_VACANT 0x16 964 965 /* Attached Device Types */ 966 #define SMP_NO_DEVICE_ATTACHED 0 967 #define SMP_END_DEVICE_ONLY 1 968 #define SMP_EDGE_EXPANDER_DEVICE 2 969 #define SMP_FANOUT_EXPANDER_DEVICE 3 970 971 /* Expander phy routine attribute */ 972 #define DIRECT_ROUTING_ATTRIBUTE 0 973 #define SUBTRACTIVE_ROUTING_ATTRIBUTE 1 974 #define TABLE_ROUTING_ATTRIBUTE 2 975 976 #endif // _INTEL_SAS_H_ 977 978