xref: /freebsd/sys/dev/ipmi/ipmi_opal.c (revision 02e9120893770924227138ba49df1edb3896112a)
1 /*-
2  * Copyright (C) 2018 Justin Hibbits
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
17  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
18  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
19  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
20  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
21  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
22  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  */
24 
25 #include <sys/param.h>
26 #include <sys/kernel.h>
27 #include <sys/systm.h>
28 #include <sys/lock.h>
29 #include <sys/module.h>
30 #include <sys/mutex.h>
31 #include <sys/bus.h>
32 #include <sys/kthread.h>
33 #include <sys/proc.h>
34 #include <sys/selinfo.h>
35 #include <sys/sysctl.h>
36 
37 #include <vm/vm.h>
38 #include <vm/pmap.h>
39 
40 #include <machine/bus.h>
41 
42 #include <dev/ofw/openfirm.h>
43 #include <dev/ofw/ofw_bus.h>
44 #include <dev/ofw/ofw_bus_subr.h>
45 
46 #include <sys/ipmi.h>
47 #include <dev/ipmi/ipmivars.h>
48 
49 #include <powerpc/powernv/opal.h>
50 
51 /*
52  * OPAL_IPMI_DEBUG
53  *
54  * 0 - disabled
55  * 1 - enable error messages (EPRINTF)
56  * 2 - enable error and debug messages (DPRINTF)
57  */
58 #define	OPAL_IPMI_DEBUG		0
59 #if OPAL_IPMI_DEBUG >= 2
60 /* debug printf */
61 #define	DPRINTF(fmt, ...)	printf("ipmi: " fmt "\n", ## __VA_ARGS__)
62 #else
63 #define	DPRINTF(fmt, ...)	((void)0)
64 #endif
65 #if OPAL_IPMI_DEBUG >= 1
66 /* error printf: to print messages only when something fails */
67 #define	EPRINTF(fmt, ...)	printf("ipmi: " fmt "\n", ## __VA_ARGS__)
68 #else
69 #define	EPRINTF(fmt, ...)	((void)0)
70 #endif
71 
72 struct opal_ipmi_softc {
73 	struct ipmi_softc ipmi;
74 	uint64_t sc_interface;
75 	int sc_timedout;
76 	struct opal_ipmi_msg *sc_msg; /* Protected by IPMI lock */
77 };
78 
79 static MALLOC_DEFINE(M_IPMI, "ipmi", "OPAL IPMI");
80 
81 static int
82 opal_ipmi_recv(struct opal_ipmi_softc *sc, uint64_t *msg_len, int timo)
83 {
84 	int err;
85 
86 	if (timo == 0)
87 		timo = MAX_TIMEOUT;
88 	timo *= 10; /* Timeout is in milliseconds, we delay in 100us */
89 
90 	for (;;) {
91 		*msg_len = sizeof(struct opal_ipmi_msg) + IPMI_MAX_RX;
92 		/* Crank the OPAL state machine while we poll for a reply. */
93 		opal_call(OPAL_POLL_EVENTS, NULL);
94 		err = opal_call(OPAL_IPMI_RECV, sc->sc_interface,
95 		    vtophys(sc->sc_msg), vtophys(msg_len));
96 		if (err != OPAL_EMPTY)
97 			break;
98 
99 		DELAY(100);
100 		if (timo-- <= 0) {
101 			sc->sc_timedout = 1;
102 			break;
103 		}
104 	}
105 
106 	if (err != OPAL_SUCCESS)
107 		EPRINTF("RECV: error: %d", err);
108 
109 	switch (err) {
110 	case OPAL_SUCCESS:
111 		DPRINTF("RECV: rv=%02x len=%ld",
112 		    sc->sc_msg->data[0], *msg_len);
113 		return (0);
114 	case OPAL_RESOURCE:
115 		return (ENOMEM);
116 	case OPAL_EMPTY:
117 		return (EAGAIN);
118 	default:
119 		return (EIO);
120 	}
121 }
122 
123 static void
124 opal_ipmi_discard_msgs(struct opal_ipmi_softc *sc)
125 {
126 	uint64_t msg_len;
127 	int err, i = 0;
128 
129 	/* OPAL_IPMI_RECV fails when msg version is not set. */
130 	sc->sc_msg->version = OPAL_IPMI_MSG_FORMAT_VERSION_1;
131 
132 	/* Wait up to 100ms for the 1st timedout message. */
133 	err = opal_ipmi_recv(sc, &msg_len, 100);
134 	while (err == 0) {
135 		i++;
136 		/* Wait only 10ms for the remaining messages. */
137 		err = opal_ipmi_recv(sc, &msg_len, 10);
138 	}
139 	if (i > 0)
140 		EPRINTF("Discarded %d message(s)", i);
141 	sc->sc_timedout = 0;
142 }
143 
144 static int
145 opal_ipmi_polled_request(struct opal_ipmi_softc *sc, struct ipmi_request *req,
146     int timo)
147 {
148 	uint64_t msg_len;
149 	int err;
150 
151 	/*
152 	 * Discard timed out messages before sending a new one, to avoid
153 	 * them being confused with the reply of the new message.
154 	 */
155 	if (sc->sc_timedout)
156 		opal_ipmi_discard_msgs(sc);
157 
158 	/* Construct and send the message. */
159 	sc->sc_msg->version = OPAL_IPMI_MSG_FORMAT_VERSION_1;
160 	sc->sc_msg->netfn = req->ir_addr;
161 	sc->sc_msg->cmd = req->ir_command;
162 
163 	if (req->ir_requestlen > IPMI_MAX_RX) {
164 		err = ENOMEM;
165 		goto out;
166 	}
167 	memcpy(sc->sc_msg->data, req->ir_request, req->ir_requestlen);
168 
169 	msg_len = sizeof(*sc->sc_msg) + req->ir_requestlen;
170 	err = opal_call(OPAL_IPMI_SEND, sc->sc_interface, vtophys(sc->sc_msg),
171 	    msg_len);
172 
173 	DPRINTF("SEND: cmd=%02x netfn=%02x len=%ld -> %d",
174 	    sc->sc_msg->cmd, sc->sc_msg->netfn, msg_len, err);
175 
176 	if (err != OPAL_SUCCESS)
177 		EPRINTF("SEND: error: %d", err);
178 
179 	switch (err) {
180 	case OPAL_SUCCESS:
181 		break;
182 	case OPAL_PARAMETER:
183 	case OPAL_UNSUPPORTED:
184 		err = EINVAL;
185 		goto out;
186 	case OPAL_RESOURCE:
187 		err = ENOMEM;
188 		goto out;
189 	case OPAL_HARDWARE:
190 	default:
191 		err = EIO;
192 		goto out;
193 	}
194 
195 	if ((err = opal_ipmi_recv(sc, &msg_len, timo)) == 0) {
196 		/* Subtract one extra for the completion code. */
197 		req->ir_replylen = msg_len - sizeof(struct opal_ipmi_msg) - 1;
198 		req->ir_replylen = min(req->ir_replylen, req->ir_replybuflen);
199 		memcpy(req->ir_reply, &sc->sc_msg->data[1], req->ir_replylen);
200 		req->ir_compcode = sc->sc_msg->data[0];
201 	}
202 
203 out:
204 	return (err);
205 }
206 
207 static int
208 opal_ipmi_probe(device_t dev)
209 {
210 	if (!ofw_bus_is_compatible(dev, "ibm,opal-ipmi"))
211 		return (ENXIO);
212 
213 	device_set_desc(dev, "OPAL IPMI System Interface");
214 
215 	return (BUS_PROBE_DEFAULT);
216 }
217 
218 static void
219 opal_ipmi_loop(void *arg)
220 {
221 	struct opal_ipmi_softc *sc = arg;
222 	struct ipmi_request *req;
223 	int i, err;
224 
225 	IPMI_LOCK(&sc->ipmi);
226 	while ((req = ipmi_dequeue_request(&sc->ipmi)) != NULL) {
227 		IPMI_UNLOCK(&sc->ipmi);
228 		err = EIO;
229 		for (i = 0; i < 3 && err != 0; i++) {
230 			IPMI_IO_LOCK(&sc->ipmi);
231 			err = opal_ipmi_polled_request(sc, req, MAX_TIMEOUT);
232 			IPMI_IO_UNLOCK(&sc->ipmi);
233 		}
234 		req->ir_error = err == 0 ? 0 : EIO;
235 		IPMI_LOCK(&sc->ipmi);
236 		ipmi_complete_request(&sc->ipmi, req);
237 	}
238 	IPMI_UNLOCK(&sc->ipmi);
239 	kproc_exit(0);
240 }
241 
242 static int
243 opal_ipmi_startup(struct ipmi_softc *sc)
244 {
245 
246 	return (kproc_create(opal_ipmi_loop, sc, &sc->ipmi_kthread, 0, 0,
247 	    "%s: opal", device_get_nameunit(sc->ipmi_dev)));
248 }
249 
250 static int
251 opal_ipmi_driver_request(struct ipmi_softc *isc, struct ipmi_request *req,
252     int timo)
253 {
254 	struct opal_ipmi_softc *sc = (struct opal_ipmi_softc *)isc;
255 	int i, err;
256 
257 	for (i = 0; i < 3; i++) {
258 		IPMI_LOCK(&sc->ipmi);
259 		err = opal_ipmi_polled_request(sc, req, timo);
260 		IPMI_UNLOCK(&sc->ipmi);
261 		if (err == 0)
262 			break;
263 	}
264 
265 	req->ir_error = err;
266 
267 	return (err);
268 }
269 
270 static int
271 opal_ipmi_attach(device_t dev)
272 {
273 	struct opal_ipmi_softc *sc;
274 	pcell_t ifid;
275 
276 	sc = device_get_softc(dev);
277 
278 	if (OF_getencprop(ofw_bus_get_node(dev), "ibm,ipmi-interface-id",
279 	    &ifid, sizeof(ifid)) < 0) {
280 		device_printf(dev, "Missing interface id\n");
281 		return (ENXIO);
282 	}
283 	sc->sc_interface = ifid;
284 	sc->ipmi.ipmi_startup = opal_ipmi_startup;
285 	sc->ipmi.ipmi_driver_request = opal_ipmi_driver_request;
286 	sc->ipmi.ipmi_enqueue_request = ipmi_polled_enqueue_request;
287 	sc->ipmi.ipmi_driver_requests_polled = 1;
288 	sc->ipmi.ipmi_dev = dev;
289 
290 	sc->sc_msg = malloc(sizeof(struct opal_ipmi_msg) + IPMI_MAX_RX, M_IPMI,
291 	    M_WAITOK | M_ZERO);
292 
293 	/* Discard old messages that may have remained in receive queue. */
294 	opal_ipmi_discard_msgs(sc);
295 
296 	return (ipmi_attach(dev));
297 }
298 
299 static int
300 opal_ipmi_detach(device_t dev)
301 {
302 	struct opal_ipmi_softc *sc;
303 	int err;
304 
305 	sc = device_get_softc(dev);
306 	err = ipmi_detach(dev);
307 	if (err == 0)
308 		free(sc->sc_msg, M_IPMI);
309 
310 	return (err);
311 }
312 
313 static device_method_t	opal_ipmi_methods[] = {
314 	/* Device interface */
315 	DEVMETHOD(device_probe,		opal_ipmi_probe),
316 	DEVMETHOD(device_attach,	opal_ipmi_attach),
317 	DEVMETHOD(device_detach,	opal_ipmi_detach),
318 	DEVMETHOD_END
319 };
320 
321 static driver_t opal_ipmi_driver = {
322 	"ipmi",
323 	opal_ipmi_methods,
324 	sizeof(struct opal_ipmi_softc)
325 };
326 
327 DRIVER_MODULE(opal_ipmi, opal, opal_ipmi_driver, NULL, NULL);
328