xref: /freebsd/sys/dev/ipmi/ipmi_acpi.c (revision 5ca8e32633c4ffbbcd6762e5888b6a4ba0708c6c)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #include <sys/param.h>
30 #include <sys/systm.h>
31 #include <sys/bus.h>
32 #include <sys/condvar.h>
33 #include <sys/kernel.h>
34 #include <sys/module.h>
35 #include <sys/rman.h>
36 #include <sys/selinfo.h>
37 
38 #include <contrib/dev/acpica/include/acpi.h>
39 
40 #include <dev/acpica/acpivar.h>
41 
42 /* Hooks for the ACPI CA debugging infrastructure */
43 #define _COMPONENT	ACPI_BUTTON
44 ACPI_MODULE_NAME("IPMI")
45 
46 #ifdef LOCAL_MODULE
47 #include <ipmi.h>
48 #include <ipmivars.h>
49 #else
50 #include <sys/ipmi.h>
51 #include <dev/ipmi/ipmivars.h>
52 #endif
53 
54 static int ipmi_acpi_probe(device_t);
55 static int ipmi_acpi_attach(device_t);
56 
57 int
58 ipmi_acpi_probe(device_t dev)
59 {
60 	static char *ipmi_ids[] = {"IPI0001", NULL};
61 	int rv;
62 
63 	if (ipmi_attached)
64 		return (EBUSY);
65 
66 	if (acpi_disabled("ipmi"))
67 		return (ENXIO);
68 	rv = ACPI_ID_PROBE(device_get_parent(dev), dev, ipmi_ids, NULL);
69 	if (rv <= 0)
70 		device_set_desc(dev, "IPMI System Interface");
71 
72 	return (rv);
73 }
74 
75 static int
76 ipmi_acpi_attach(device_t dev)
77 {
78 	ACPI_HANDLE devh;
79 	const char *mode;
80 	struct ipmi_softc *sc = device_get_softc(dev);
81 	int count, error, i, type;
82 	int interface_type = 0, interface_version = 0;
83 
84 	error = 0;
85 	devh = acpi_get_handle(dev);
86 	if (ACPI_FAILURE(acpi_GetInteger(devh, "_IFT", &interface_type)))
87 		return (ENXIO);
88 
89 	if (ACPI_FAILURE(acpi_GetInteger(devh, "_SRV", &interface_version)))
90 		return (ENXIO);
91 
92 	switch (interface_type) {
93 	case KCS_MODE:
94 		count = IPMI_IF_KCS_NRES;
95 		mode = "KCS";
96 		break;
97 	case SMIC_MODE:
98 		count = IPMI_IF_SMIC_NRES;
99 		mode = "SMIC";
100 		break;
101 	case BT_MODE:
102 		count = IPMI_IF_BT_NRES;
103 		mode = "BT";
104 		break;
105 	case SSIF_MODE:
106 		device_printf(dev, "SSIF interface not supported on ACPI\n");
107 		return (0);
108 	default:
109 		return (ENXIO);
110 	}
111 
112 	if (bus_get_resource(dev, SYS_RES_IOPORT, 0, NULL, NULL) == 0)
113 		type = SYS_RES_IOPORT;
114 	else if (bus_get_resource(dev, SYS_RES_MEMORY, 0, NULL, NULL) == 0)
115 		type = SYS_RES_MEMORY;
116 	else {
117 		device_printf(dev, "unknown resource type\n");
118 		return (ENXIO);
119 	}
120 
121 	sc->ipmi_io_rid = 0;
122 	sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
123 	    &sc->ipmi_io_rid, RF_ACTIVE);
124 	sc->ipmi_io_type = type;
125 	sc->ipmi_io_spacing = 1;
126 	if (sc->ipmi_io_res[0] == NULL) {
127 		device_printf(dev, "couldn't configure I/O resource\n");
128 		return (ENXIO);
129 	}
130 
131 	/* If we have multiple resources, allocate up to MAX_RES. */
132 	for (i = 1; i < MAX_RES; i++) {
133 		sc->ipmi_io_rid = i;
134 		sc->ipmi_io_res[i] = bus_alloc_resource_any(dev, type,
135 		    &sc->ipmi_io_rid, RF_ACTIVE);
136 		if (sc->ipmi_io_res[i] == NULL)
137 			break;
138 	}
139 	sc->ipmi_io_rid = 0;
140 
141 	/* If we have multiple resources, make sure we have enough of them. */
142 	if (sc->ipmi_io_res[1] != NULL && sc->ipmi_io_res[count - 1] == NULL) {
143 		device_printf(dev, "too few I/O resources\n");
144 		error = ENXIO;
145 		goto bad;
146 	}
147 
148 	device_printf(dev, "%s mode found at %s 0x%jx on %s\n",
149 	    mode, type == SYS_RES_IOPORT ? "io" : "mem",
150 	    (uintmax_t)rman_get_start(sc->ipmi_io_res[0]),
151 	    device_get_name(device_get_parent(dev)));
152 
153 	sc->ipmi_dev = dev;
154 
155 	/*
156 	 * Setup an interrupt if we have an interrupt resource.  We
157 	 * don't support GPE interrupts via _GPE yet.
158 	 */
159 	sc->ipmi_irq_rid = 0;
160 	sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
161 	    &sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
162 
163 	/* Warn if _GPE exists. */
164 	if (ACPI_SUCCESS(AcpiEvaluateObject(devh, "_GPE", NULL, NULL)))
165 		device_printf(dev, "_GPE support not implemented\n");
166 
167 	/*
168 	 * We assume an alignment of 1 byte as currently the IPMI spec
169 	 * doesn't provide any way to determine the alignment via ACPI.
170 	 */
171 	error = ENXIO;
172 	switch (interface_type) {
173 	case KCS_MODE:
174 		error = ipmi_kcs_attach(sc);
175 		break;
176 	case SMIC_MODE:
177 		error = ipmi_smic_attach(sc);
178 		break;
179 	case BT_MODE:
180 		error = ipmi_bt_attach(sc);
181 		break;
182 	}
183 	if (error)
184 		goto bad;
185 	error = ipmi_attach(dev);
186 	if (error)
187 		goto bad;
188 
189 	return (0);
190 bad:
191 	ipmi_release_resources(dev);
192 	return (error);
193 }
194 
195 static device_method_t ipmi_methods[] = {
196 	/* Device interface */
197 	DEVMETHOD(device_probe,		ipmi_acpi_probe),
198 	DEVMETHOD(device_attach,	ipmi_acpi_attach),
199 	DEVMETHOD(device_detach,	ipmi_detach),
200 	{ 0, 0 }
201 };
202 
203 static driver_t ipmi_acpi_driver = {
204 	"ipmi",
205 	ipmi_methods,
206 	sizeof(struct ipmi_softc),
207 };
208 
209 DRIVER_MODULE(ipmi_acpi, acpi, ipmi_acpi_driver, 0, 0);
210 MODULE_DEPEND(ipmi_acpi, acpi, 1, 1, 1);
211