1 /* 2 * Copyright (c) 2020 Takanori Watanabe 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 13 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 14 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 15 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 16 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 17 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 18 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 19 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 20 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 21 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23 * SUCH DAMAGE. 24 */ 25 26 #include <sys/cdefs.h> 27 __FBSDID("$FreeBSD$"); 28 29 #include <sys/param.h> 30 #include <sys/systm.h> 31 #include <sys/kernel.h> 32 #include <sys/module.h> 33 #include <sys/errno.h> 34 #include <sys/lock.h> 35 #include <sys/mutex.h> 36 #include <sys/sysctl.h> 37 #include <sys/syslog.h> 38 #include <sys/bus.h> 39 40 #include <machine/bus.h> 41 #include <sys/rman.h> 42 #include <machine/resource.h> 43 #include <dev/pci/pcivar.h> 44 #include <dev/pci/pcireg.h> 45 46 #define PCHTHERM_REG_TEMP 0 47 #define PCHTHERM_REG_TSC 4 48 #define PCHTHERM_REG_TSS 6 49 #define PCHTHERM_REG_TSEL 8 50 #define PCHTHERM_REG_TSREL 0xa 51 #define PCHTHERM_REG_TSMIC 0xc 52 #define PCHTHERM_REG_CTT 0x10 53 #define PCHTHERM_REG_TAHV 0x14 54 #define PCHTHERM_REG_TALV 0x18 55 #define PCHTHERM_REG_TSPM 0x1c 56 #define PCHTHERM_REG_TL 0x40 57 #define PCHTHERM_REG_TL2 0x50 58 #define PCHTHERM_REG_PHL 0x60 59 #define PCHTHERM_REG_PHLC 0x62 60 #define PCHTHERM_REG_TAS 0x80 61 #define PCHTHERM_REG_TSPIEN 0x82 62 #define PCHTHERM_REG_TSGPEN 0x84 63 #define PCHTHERM_REG_TCFD 0xf0 64 #define PCHTHERM_GEN_LOCKDOWN 0x80 65 #define PCHTHERM_GEN_ENABLE 1 66 #define PCHTHERM_TEMP_FACTOR 5 67 #define PCHTHERM_TEMP_ZERO 2231 68 #define PCHTHERM_TEMP_MASK 0x1ff 69 #define PCHTHERM_TL_T0 0 70 #define PCHTHERM_TL_T1 10 71 #define PCHTHERM_TL_T2 20 72 #define PCHTHERM_TEMP_TO_IK(val) (((val) & PCHTHERM_TEMP_MASK) * \ 73 PCHTHERM_TEMP_FACTOR + \ 74 PCHTHERM_TEMP_ZERO) 75 76 struct pchtherm_softc 77 { 78 int tbarrid; 79 struct resource *tbar; 80 int enable; 81 int ctten; 82 int pmtemp; 83 unsigned int pmtime; 84 }; 85 86 static const struct pci_device_table pchtherm_devices[] = 87 { 88 { PCI_DEV(0x8086, 0x9c24), 89 PCI_DESCR("Haswell Thermal Subsystem")}, 90 { PCI_DEV(0x8086, 0x8c24), 91 PCI_DESCR("Haswell Thermal Subsystem")}, 92 { PCI_DEV(0x8086, 0x9ca4), 93 PCI_DESCR("Wildcat Point Thermal Subsystem")}, 94 { PCI_DEV(0x8086, 0x9d31), 95 PCI_DESCR("Skylake PCH Thermal Subsystem")}, 96 { PCI_DEV(0x8086, 0xa131), 97 PCI_DESCR("Skylake PCH 100 Thermal Subsystem")}, 98 { PCI_DEV(0x8086, 0x9df9), 99 PCI_DESCR("CannonLake-LP Thermal Subsystem")}, 100 { PCI_DEV(0x8086, 0xa379), 101 PCI_DESCR("CannonLake-H Thermal Subsystem")}, 102 { PCI_DEV(0x8086, 0x02f9), 103 PCI_DESCR("CometLake-LP Thermal Subsystem")}, 104 { PCI_DEV(0x8086, 0x06f9), 105 PCI_DESCR("CometLake-H Thermal Subsystem")}, 106 { PCI_DEV(0x8086, 0xa1b1), 107 PCI_DESCR("Lewisburg Thermal Subsystem")}, 108 }; 109 110 static int pchtherm_probe(device_t dev) 111 { 112 const struct pci_device_table *tbl; 113 114 tbl = PCI_MATCH(dev, pchtherm_devices); 115 if (tbl == NULL) 116 return (ENXIO); 117 device_set_desc(dev, tbl->descr); 118 119 return (BUS_PROBE_DEFAULT); 120 121 } 122 static int pchtherm_tltemp_sysctl(SYSCTL_HANDLER_ARGS) 123 { 124 struct pchtherm_softc *sc = oidp->oid_arg1; 125 int regshift = oidp->oid_arg2; 126 int temp; 127 128 temp = bus_read_4(sc->tbar, PCHTHERM_REG_TL); 129 temp >>= regshift; 130 temp = PCHTHERM_TEMP_TO_IK(temp); 131 132 return sysctl_handle_int(oidp, &temp, 0, req); 133 } 134 static int pchtherm_temp_sysctl(SYSCTL_HANDLER_ARGS) 135 { 136 struct pchtherm_softc *sc = oidp->oid_arg1; 137 int regoff = oidp->oid_arg2; 138 int temp; 139 140 temp = bus_read_2(sc->tbar, regoff); 141 temp = PCHTHERM_TEMP_TO_IK(temp); 142 143 return sysctl_handle_int(oidp, &temp, 0, req); 144 } 145 146 #define FLAG_PRINT(dev, str, val) device_printf \ 147 (dev, str " %s %sable\n", \ 148 ((val) & 0x80)? "Locked" : "", \ 149 ((val) & 0x1)? "En" : "Dis") 150 151 static int pchtherm_attach(device_t dev) 152 { 153 struct pchtherm_softc *sc = device_get_softc(dev); 154 unsigned int val; 155 int flag; 156 int temp; 157 158 sc->tbarrid = PCIR_BAR(0); 159 sc->tbar = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 160 &sc->tbarrid, RF_ACTIVE|RF_SHAREABLE); 161 if (sc->tbar == NULL) { 162 return (ENOMEM); 163 } 164 sc->enable = bus_read_1(sc->tbar, PCHTHERM_REG_TSEL); 165 if (!(sc->enable & PCHTHERM_GEN_ENABLE )) { 166 if (sc->enable & PCHTHERM_GEN_LOCKDOWN) { 167 device_printf(dev, "Sensor not available\n"); 168 return 0; 169 } else { 170 device_printf(dev, "Enabling Sensor\n"); 171 bus_write_1(sc->tbar, PCHTHERM_REG_TSEL, 172 PCHTHERM_GEN_ENABLE); 173 sc->enable = bus_read_1(sc->tbar, PCHTHERM_REG_TSEL); 174 if (!(sc->enable & PCHTHERM_GEN_ENABLE)) { 175 device_printf(dev, "Sensor enable failed\n"); 176 return 0; 177 } 178 } 179 } 180 181 sc->ctten = bus_read_1(sc->tbar, PCHTHERM_REG_TSC); 182 if (bootverbose) { 183 FLAG_PRINT(dev, "Catastrophic Power Down", sc->ctten); 184 } 185 val = bus_read_1(sc->tbar, PCHTHERM_REG_TSREL); 186 if (bootverbose) { 187 FLAG_PRINT(dev, "SMBus report", val); 188 } 189 val = bus_read_1(sc->tbar, PCHTHERM_REG_TSMIC); 190 if (bootverbose) { 191 FLAG_PRINT(dev, "SMI on alert", val); 192 } 193 val = bus_read_2(sc->tbar, PCHTHERM_REG_TSPM); 194 flag = val >> 13; 195 if (bootverbose) { 196 device_printf(dev, "TSPM: %b\n", 197 flag, "\20\3Lock\2DTSS0EN\1DSSOC0"); 198 device_printf(dev, "MAX Thermal Sensor Shutdown Time %ds\n", 199 1<<((val>>9)&7)); 200 } 201 202 temp = val & PCHTHERM_TEMP_MASK; 203 sc->pmtemp = PCHTHERM_TEMP_TO_IK(temp); 204 sc->pmtime = 1<<((val>>9)&7); 205 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 206 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 207 OID_AUTO, "pmtemp", CTLTYPE_INT|CTLFLAG_RD, 208 sc, PCHTHERM_REG_TSPM, pchtherm_temp_sysctl, 209 "IK", "Thermal sensor idle temperature"); 210 SYSCTL_ADD_U32(device_get_sysctl_ctx(dev), 211 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 212 OID_AUTO, "pmtime", CTLFLAG_RD, 213 &sc->pmtime, 0,"Thermal sensor idle duration"); 214 215 val = bus_read_4(sc->tbar, PCHTHERM_REG_TL); 216 flag = val>>29; 217 218 if (bootverbose) { 219 device_printf(dev, "Throttling %b\n", 220 flag, "\20\3Lock\2TT13EN\1TTEN"); 221 } 222 223 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 224 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 225 OID_AUTO, "t0temp", CTLTYPE_INT |CTLFLAG_RD, 226 sc, PCHTHERM_TL_T0, pchtherm_tltemp_sysctl, 227 "IK", "T0 temperature"); 228 229 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 230 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 231 OID_AUTO, "t1temp", CTLTYPE_INT |CTLFLAG_RD, 232 sc, PCHTHERM_TL_T1, pchtherm_tltemp_sysctl, 233 "IK", "T1 temperature"); 234 235 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 236 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 237 OID_AUTO, "t2temp", CTLTYPE_INT |CTLFLAG_RD, 238 sc, PCHTHERM_TL_T2, pchtherm_tltemp_sysctl, 239 "IK", "T2 temperature"); 240 241 val = bus_read_2(sc->tbar, PCHTHERM_REG_TL2); 242 if (bootverbose) { 243 flag = val >>14; 244 device_printf(dev, "TL2 flag %b\n", 245 flag, "\20\1PMCTEN\2Lock"); 246 } 247 248 /* If PHL is disable and lockdown, don't export it.*/ 249 val = bus_read_2(sc->tbar, PCHTHERM_REG_PHLC); 250 val <<= 16; 251 val |= bus_read_2(sc->tbar, PCHTHERM_REG_PHL); 252 if ((val & 0x10000) != 0x10000) { 253 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 254 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 255 OID_AUTO, "pch_hot_level", 256 CTLTYPE_INT |CTLFLAG_RD, 257 sc, PCHTHERM_REG_PHL, 258 pchtherm_temp_sysctl, "IK", 259 "PCH Hot level Temperature"); 260 } 261 262 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 263 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 264 OID_AUTO, "temperature", CTLTYPE_INT |CTLFLAG_RD, 265 sc, PCHTHERM_REG_TEMP, 266 pchtherm_temp_sysctl, "IK", "Current temperature"); 267 /* 268 * If sensor enable bit is locked down, there is no way to change 269 * alart values effectively. 270 */ 271 if (!(sc->enable & PCHTHERM_GEN_LOCKDOWN) || 272 bus_read_2(sc->tbar, PCHTHERM_REG_TAHV) != 0) { 273 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 274 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 275 OID_AUTO, "tahv", CTLTYPE_INT |CTLFLAG_RD, 276 sc, PCHTHERM_REG_TAHV, 277 pchtherm_temp_sysctl, "IK", 278 "Alart High temperature"); 279 } 280 281 if (!(sc->enable & PCHTHERM_GEN_LOCKDOWN) || 282 bus_read_2(sc->tbar, PCHTHERM_REG_TALV) != 0) { 283 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 284 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 285 OID_AUTO, "talv", CTLTYPE_INT |CTLFLAG_RD, 286 sc, PCHTHERM_REG_TALV, 287 pchtherm_temp_sysctl, "IK", 288 "Alart Low temperature"); 289 } 290 if (!(sc->ctten& PCHTHERM_GEN_LOCKDOWN) || 291 sc->ctten& PCHTHERM_GEN_ENABLE) { 292 SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), 293 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 294 OID_AUTO, "ctt", 295 CTLTYPE_INT |CTLFLAG_RD, 296 sc, PCHTHERM_REG_CTT, 297 pchtherm_temp_sysctl, "IK", 298 "Catastrophic Trip Point"); 299 } 300 301 return 0; 302 } 303 static int pchtherm_detach(device_t dev) 304 { 305 struct pchtherm_softc *sc = device_get_softc(dev); 306 bus_release_resource(dev, SYS_RES_MEMORY, sc->tbarrid, sc->tbar); 307 308 return 0; 309 } 310 311 static device_method_t pchtherm_methods[] = 312 { 313 DEVMETHOD(device_probe, pchtherm_probe), 314 DEVMETHOD(device_attach, pchtherm_attach), 315 DEVMETHOD(device_detach, pchtherm_detach), 316 317 DEVMETHOD_END 318 }; 319 320 static driver_t pchtherm_driver = { 321 "pchtherm", 322 pchtherm_methods, 323 sizeof(struct pchtherm_softc) 324 }; 325 326 DRIVER_MODULE(pchtherm, pci, pchtherm_driver, 0, 0); 327 PCI_PNP_INFO(pchtherm_devices); 328