1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Authors: Joe Kloss; Ravi Pokala (rpokala@freebsd.org) 5 * 6 * Copyright (c) 2017-2018 Panasas 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * $FreeBSD$ 30 */ 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <sys/endian.h> 37 #include <sys/errno.h> 38 #include <sys/lock.h> 39 #include <sys/mutex.h> 40 #include <sys/syslog.h> 41 #include <sys/bus.h> 42 43 #include <machine/bus.h> 44 #include <machine/atomic.h> 45 46 #include <dev/pci/pcivar.h> 47 #include <dev/pci/pcireg.h> 48 49 #include <dev/smbus/smbconf.h> 50 51 #include "imcsmb_reg.h" 52 #include "imcsmb_var.h" 53 54 /* (Sandy,Ivy)bridge-Xeon and (Has,Broad)well-Xeon CPUs contain one or two 55 * "Integrated Memory Controllers" (iMCs), and each iMC contains two separate 56 * SMBus controllers. These are used for reading SPD data from the DIMMs, and 57 * for reading the "Thermal Sensor on DIMM" (TSODs). The iMC SMBus controllers 58 * are very simple devices, and have limited functionality compared to 59 * full-fledged SMBus controllers, like the one in Intel ICHs and PCHs. 60 * 61 * The publicly available documentation for the iMC SMBus controllers can be 62 * found in the CPU datasheets for (Sandy,Ivy)bridge-Xeon and 63 * (Has,broad)well-Xeon, respectively: 64 * 65 * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/ 66 * Sandybridge xeon-e5-1600-2600-vol-2-datasheet.pdf 67 * Ivybridge xeon-e5-v2-datasheet-vol-2.pdf 68 * Haswell xeon-e5-v3-datasheet-vol-2.pdf 69 * Broadwell xeon-e5-v4-datasheet-vol-2.pdf 70 * 71 * Another useful resource is the Linux driver. It is not in the main tree. 72 * 73 * https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg840043.html 74 * 75 * The iMC SMBus controllers do not support interrupts (thus, they must be 76 * polled for IO completion). All of the iMC registers are in PCI configuration 77 * space; there is no support for PIO or MMIO. As a result, this driver does 78 * not need to perform and newbus resource manipulation. 79 * 80 * Because there are multiple SMBus controllers sharing the same PCI device, 81 * this driver is actually *two* drivers: 82 * 83 * - "imcsmb" is an smbus(4)-compliant SMBus controller driver 84 * 85 * - "imcsmb_pci" recognizes the PCI device and assigns the appropriate set of 86 * PCI config registers to a specific "imcsmb" instance. 87 */ 88 89 /* Depending on the motherboard and firmware, the TSODs might be polled by 90 * firmware. Therefore, when this driver accesses these SMBus controllers, the 91 * firmware polling must be disabled as part of requesting the bus, and 92 * re-enabled when releasing the bus. Unfortunately, the details of how to do 93 * this are vendor-specific. Contact your motherboard vendor to get the 94 * information you need to do proper implementations. 95 * 96 * For NVDIMMs which conform to the ACPI "NFIT" standard, the ACPI firmware 97 * manages the NVDIMM; for those which pre-date the standard, the operating 98 * system interacts with the NVDIMM controller using a vendor-proprietary API 99 * over the SMBus. In that case, the NVDIMM driver would be an SMBus slave 100 * device driver, and would interface with the hardware via an SMBus controller 101 * driver such as this one. 102 */ 103 104 /* PCIe device IDs for (Sandy,Ivy)bridge)-Xeon and (Has,Broad)well-Xeon */ 105 #define PCI_VENDOR_INTEL 0x8086 106 #define IMCSMB_PCI_DEV_ID_IMC0_SBX 0x3ca8 107 #define IMCSMB_PCI_DEV_ID_IMC0_IBX 0x0ea8 108 #define IMCSMB_PCI_DEV_ID_IMC0_HSX 0x2fa8 109 #define IMCSMB_PCI_DEV_ID_IMC0_BDX 0x6fa8 110 /* (Sandy,Ivy)bridge-Xeon only have a single memory controller per socket */ 111 #define IMCSMB_PCI_DEV_ID_IMC1_HSX 0x2f68 112 #define IMCSMB_PCI_DEV_ID_IMC1_BDX 0x6f68 113 114 /* There are two SMBus controllers in each device. These define the registers 115 * for each of these devices. 116 */ 117 static struct imcsmb_reg_set imcsmb_regs[] = { 118 { 119 .smb_stat = IMCSMB_REG_STATUS0, 120 .smb_cmd = IMCSMB_REG_COMMAND0, 121 .smb_cntl = IMCSMB_REG_CONTROL0 122 }, 123 { 124 .smb_stat = IMCSMB_REG_STATUS1, 125 .smb_cmd = IMCSMB_REG_COMMAND1, 126 .smb_cntl = IMCSMB_REG_CONTROL1 127 }, 128 }; 129 130 static struct imcsmb_pci_device { 131 uint16_t id; 132 char *name; 133 } imcsmb_pci_devices[] = { 134 {IMCSMB_PCI_DEV_ID_IMC0_SBX, 135 "Intel Sandybridge Xeon iMC 0 SMBus controllers" }, 136 {IMCSMB_PCI_DEV_ID_IMC0_IBX, 137 "Intel Ivybridge Xeon iMC 0 SMBus controllers" }, 138 {IMCSMB_PCI_DEV_ID_IMC0_HSX, 139 "Intel Haswell Xeon iMC 0 SMBus controllers" }, 140 {IMCSMB_PCI_DEV_ID_IMC1_HSX, 141 "Intel Haswell Xeon iMC 1 SMBus controllers" }, 142 {IMCSMB_PCI_DEV_ID_IMC0_BDX, 143 "Intel Broadwell Xeon iMC 0 SMBus controllers" }, 144 {IMCSMB_PCI_DEV_ID_IMC1_BDX, 145 "Intel Broadwell Xeon iMC 1 SMBus controllers" }, 146 {0, NULL}, 147 }; 148 149 /* Device methods. */ 150 static int imcsmb_pci_attach(device_t dev); 151 static int imcsmb_pci_detach(device_t dev); 152 static int imcsmb_pci_probe(device_t dev); 153 154 /** 155 * device_attach() method. Set up the PCI device's softc, then explicitly create 156 * children for the actual imcsmbX controllers. Set up the child's ivars to 157 * point to the proper set of the PCI device's config registers. 158 * 159 * @author Joe Kloss, rpokala 160 * 161 * @param[in,out] dev 162 * Device being attached. 163 */ 164 static int 165 imcsmb_pci_attach(device_t dev) 166 { 167 struct imcsmb_pci_softc *sc; 168 device_t child; 169 int rc; 170 int unit; 171 172 /* Initialize private state */ 173 sc = device_get_softc(dev); 174 sc->dev = dev; 175 sc->semaphore = 0; 176 177 /* Create the imcsmbX children */ 178 for (unit = 0; unit < 2; unit++) { 179 child = device_add_child(dev, "imcsmb", -1); 180 if (child == NULL) { 181 /* Nothing has been allocated, so there's no cleanup. */ 182 device_printf(dev, "Child imcsmb not added\n"); 183 rc = ENXIO; 184 goto out; 185 } 186 /* Set the child's ivars to point to the appropriate set of 187 * the PCI device's registers. 188 */ 189 device_set_ivars(child, &imcsmb_regs[unit]); 190 } 191 192 /* Attach the imcsmbX children. */ 193 if ((rc = bus_generic_attach(dev)) != 0) { 194 device_printf(dev, "failed to attach children: %d\n", rc); 195 goto out; 196 } 197 198 out: 199 return (rc); 200 } 201 202 /** 203 * device_detach() method. attach() didn't do any allocations, so all that's 204 * needed here is to free up any downstream drivers and children. 205 * 206 * @author Joe Kloss 207 * 208 * @param[in] dev 209 * Device being detached. 210 */ 211 static int 212 imcsmb_pci_detach(device_t dev) 213 { 214 int rc; 215 216 /* Detach any attached drivers */ 217 rc = bus_generic_detach(dev); 218 if (rc == 0) { 219 /* Remove all children */ 220 rc = device_delete_children(dev); 221 } 222 223 return (rc); 224 } 225 226 /** 227 * device_probe() method. Look for the right PCI vendor/device IDs. 228 * 229 * @author Joe Kloss, rpokala 230 * 231 * @param[in,out] dev 232 * Device being probed. 233 */ 234 static int 235 imcsmb_pci_probe(device_t dev) 236 { 237 struct imcsmb_pci_device *pci_device; 238 int rc; 239 uint16_t pci_dev_id; 240 241 rc = ENXIO; 242 243 if (pci_get_vendor(dev) != PCI_VENDOR_INTEL) { 244 goto out; 245 } 246 247 pci_dev_id = pci_get_device(dev); 248 for (pci_device = imcsmb_pci_devices; 249 pci_device->name != NULL; 250 pci_device++) { 251 if (pci_dev_id == pci_device->id) { 252 device_set_desc(dev, pci_device->name); 253 rc = BUS_PROBE_DEFAULT; 254 goto out; 255 } 256 } 257 258 out: 259 return (rc); 260 } 261 262 /** 263 * Invoked via smbus_callback() -> imcsmb_callback(); clear the semaphore, and 264 * re-enable motherboard-specific DIMM temperature monitoring if needed. This 265 * gets called after the transaction completes. 266 * 267 * @author Joe Kloss 268 * 269 * @param[in,out] dev 270 * The device whose busses to release. 271 */ 272 void 273 imcsmb_pci_release_bus(device_t dev) 274 { 275 struct imcsmb_pci_softc *sc; 276 277 sc = device_get_softc(dev); 278 279 /* 280 * IF NEEDED, INSERT MOTHERBOARD-SPECIFIC CODE TO RE-ENABLE DIMM 281 * TEMPERATURE MONITORING HERE. 282 */ 283 284 atomic_store_rel_int(&sc->semaphore, 0); 285 } 286 287 /** 288 * Invoked via smbus_callback() -> imcsmb_callback(); set the semaphore, and 289 * disable motherboard-specific DIMM temperature monitoring if needed. This gets 290 * called before the transaction starts. 291 * 292 * @author Joe Kloss 293 * 294 * @param[in,out] dev 295 * The device whose busses to request. 296 */ 297 int 298 imcsmb_pci_request_bus(device_t dev) 299 { 300 struct imcsmb_pci_softc *sc; 301 int rc; 302 303 sc = device_get_softc(dev); 304 rc = 0; 305 306 /* We don't want to block. Use a simple test-and-set semaphore to 307 * protect the bus. 308 */ 309 if (atomic_cmpset_acq_int(&sc->semaphore, 0, 1) == 0) { 310 rc = EWOULDBLOCK; 311 } 312 313 /* 314 * IF NEEDED, INSERT MOTHERBOARD-SPECIFIC CODE TO DISABLE DIMM 315 * TEMPERATURE MONITORING HERE. 316 */ 317 318 return (rc); 319 } 320 321 /* Device methods */ 322 static device_method_t imcsmb_pci_methods[] = { 323 /* Device interface */ 324 DEVMETHOD(device_attach, imcsmb_pci_attach), 325 DEVMETHOD(device_detach, imcsmb_pci_detach), 326 DEVMETHOD(device_probe, imcsmb_pci_probe), 327 328 DEVMETHOD_END 329 }; 330 331 static driver_t imcsmb_pci_driver = { 332 .name = "imcsmb_pci", 333 .methods = imcsmb_pci_methods, 334 .size = sizeof(struct imcsmb_pci_softc), 335 }; 336 337 DRIVER_MODULE(imcsmb_pci, pci, imcsmb_pci_driver, 0, 0); 338 MODULE_DEPEND(imcsmb_pci, pci, 1, 1, 1); 339 MODULE_VERSION(imcsmb_pci, 1); 340 341 /* vi: set ts=8 sw=4 sts=8 noet: */ 342