1 /* 2 * Copyright 2004 by Peter Grehan. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 #ifndef _VIA6522REG_H_ 31 #define _VIA6522REG_H_ 32 33 /* Registers */ 34 #define REG_OIRB 0 /* Input/output register B */ 35 #define REG_OIRA 1 /* Input/output register A */ 36 #define REG_DDRB 2 /* Data direction register B */ 37 #define REG_DDRA 3 /* Data direction register A */ 38 #define REG_T1CL 4 /* T1 low-order latch/low-order counter */ 39 #define REG_T1CH 5 /* T1 high-order counter */ 40 #define REG_T1LL 6 /* T1 low-order latches */ 41 #define REG_T1LH 7 /* T1 high-order latches */ 42 #define REG_T2CL 8 /* T2 low-order latch/low-order counter */ 43 #define REG_T2CH 9 /* T2 high-order counter */ 44 #define REG_SR 10 /* Shift register */ 45 #define REG_ACR 11 /* Auxiliary control register */ 46 #define REG_PCR 12 /* Peripheral control register */ 47 #define REG_IFR 13 /* Interrupt flag register */ 48 #define REG_IER 14 /* Interrupt-enable register */ 49 #define REG_OIRA_NH 15 /* Input/output register A: no handshake */ 50 51 52 /* Auxiliary control register (11) */ 53 #define ACR_SR_NONE 0x0 /* Disabled */ 54 #define ACR_SR_DIR 0x4 /* Bit for shift-register direction 1=out */ 55 #define ACR_SRI_T2 0x1 /* Shift in under control of T2 */ 56 #define ACR_SRI_PHI2 0x2 /* " " " " " PHI2 */ 57 #define ACR_SRI_EXTCLK 0x3 /* " " " " " external clk */ 58 #define ACR_SRO 0x4 /* Shift out free running at T2 rate */ 59 #define ACR_SRO_T2 0x5 /* Shift out under control of T2 */ 60 #define ACR_SRO_PHI2 0x6 /* " " " " " PHI2 */ 61 #define ACR_SRO_EXTCLK 0x7 /* " " " " " external clk */ 62 63 #define ACR_T1_SHIFT 5 /* bits 7-5 */ 64 #define ACR_SR_SHIFT 2 /* bits 4-2 */ 65 66 67 /* Peripheral control register (12) */ 68 #define PCR_INTCNTL 0x01 /* interrupt active edge: +ve=1, -ve=0 */ 69 70 #define PCR_CNTL_MASK 0x3 /* 3 bits */ 71 #define PCR_CNTL_NEDGE 0x0 /* Input - negative active edge */ 72 #define PCR_CNTL_INEDGE 0x1 /* Interrupt - negative active edge */ 73 #define PCR_CNTL_PEDGE 0x2 /* Input - positive active edge */ 74 #define PCR_CNTL_IPEDGE 0x3 /* Interrupt - positive active edge */ 75 #define PCR_CNTL_HSHAKE 0x4 /* Handshake output */ 76 #define PCR_CNTL_PULSE 0x5 /* Pulse output */ 77 #define PCR_CNTL_LOW 0x6 /* Low output */ 78 #define PCR_CNTL_HIGH 0x7 /* High output */ 79 80 #define PCR_CB2_SHIFT 5 /* bits 7-5 */ 81 #define PCR_CB1_SHIFT 4 /* bit 4 */ 82 #define PCR_CA2_SHIFT 1 /* bits 3-1 */ 83 #define PCR_CA1_SHIFT 0 /* bit 0 */ 84 85 /* Interrupt flag register (13) */ 86 #define IFR_CA2 0x01 87 #define IFR_CA1 0x02 88 #define IFR_SR 0x04 89 #define IFR_CB2 0x08 90 #define IFR_CB1 0x10 91 #define IFR_T2 0x20 92 #define IFR_T1 0x40 93 #define IFR_IRQB 0x80 /* status of IRQB output pin */ 94 95 /* Interrupt enable register (14) */ 96 #define IER_CA2 IFR_CA2 97 #define IER_CA1 IFR_CA1 98 #define IER_SR IFR_SR 99 #define IER_CB2 IFR_CB2 100 #define IER_CB1 IFR_CB1 101 #define IER_T2 IFR_T2 102 #define IER_T1 IFR_T1 103 #define IER_IRQB IFR_IRQB 104 105 #endif /* _VIA6522REG_H_ */ 106