1 /*- 2 * Copyright (c) 1992, University of Vermont and State Agricultural College. 3 * Copyright (c) 1992, Garrett A. Wollman. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by the University of 17 * Vermont and State Agricultural College and Garrett A. Wollman. 18 * 4. Neither the name of the University nor the name of the author 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE UNIVERSITY OR AUTHOR BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * $FreeBSD$ 35 */ 36 37 /* 38 * Intel 82586 Ethernet chip 39 * Register, bit, and structure definitions. 40 * 41 * Written by GAW with reference to the Clarkson Packet Driver code for this 42 * chip written by Russ Nelson and others. 43 */ 44 45 struct ie_en_addr { 46 u_char data[6]; 47 }; 48 49 /* 50 * This is the master configuration block. It tells the hardware where all 51 * the rest of the stuff is. 52 */ 53 struct ie_sys_conf_ptr { 54 u_short mbz; /* must be zero */ 55 u_char ie_bus_use; /* true if 8-bit only */ 56 u_char mbz2[5]; /* must be zero */ 57 caddr_t ie_iscp_ptr; /* 24-bit physaddr of ISCP */ 58 }; 59 60 /* 61 * Note that this is wired in hardware; the SCP is always located here, no 62 * matter what. 63 */ 64 #define IE_SCP_ADDR 0xfffff4 65 66 /* 67 * The tells the hardware where all the rest of the stuff is, too. 68 * FIXME: some of these should be re-commented after we figure out their 69 * REAL function. 70 */ 71 struct ie_int_sys_conf_ptr { 72 u_char ie_busy; /* zeroed after init */ 73 u_char mbz; 74 u_short ie_scb_offset; /* 16-bit physaddr of next struct */ 75 caddr_t ie_base; /* 24-bit physaddr for all 16-bit vars */ 76 }; 77 78 /* 79 * This FINALLY tells the hardware what to do and where to put it. 80 */ 81 struct ie_sys_ctl_block { 82 u_short ie_status; /* status word */ 83 u_short ie_command; /* command word */ 84 u_short ie_command_list; /* 16-pointer to command block list */ 85 u_short ie_recv_list; /* 16-pointer to receive frame list */ 86 u_short ie_err_crc; /* CRC errors */ 87 u_short ie_err_align; /* Alignment errors */ 88 u_short ie_err_resource; /* Resource errors */ 89 u_short ie_err_overrun; /* Overrun errors */ 90 }; 91 92 /* Command values */ 93 #define IE_RU_COMMAND 0x0070 /* mask for RU command */ 94 #define IE_RU_NOP 0 /* for completeness */ 95 #define IE_RU_START 0x0010 /* start receive unit command */ 96 #define IE_RU_ENABLE 0x0020 /* enable receiver command */ 97 #define IE_RU_DISABLE 0x0030 /* disable receiver command */ 98 #define IE_RU_ABORT 0x0040 /* abort current receive operation */ 99 100 #define IE_CU_COMMAND 0x0700 /* mask for CU command */ 101 #define IE_CU_NOP 0 /* included for completeness */ 102 #define IE_CU_START 0x0100 /* do-command command */ 103 #define IE_CU_RESUME 0x0200 /* resume a suspended cmd list */ 104 #define IE_CU_STOP 0x0300 /* SUSPEND was already taken */ 105 #define IE_CU_ABORT 0x0400 /* abort current command */ 106 107 #define IE_ACK_COMMAND 0xf000 /* mask for ACK command */ 108 #define IE_ACK_CX 0x8000 /* ack IE_ST_DONE */ 109 #define IE_ACK_FR 0x4000 /* ack IE_ST_RECV */ 110 #define IE_ACK_CNA 0x2000 /* ack IE_ST_ALLDONE */ 111 #define IE_ACK_RNR 0x1000 /* ack IE_ST_RNR */ 112 113 #define IE_ACTION_COMMAND(x) (((x) & IE_CU_COMMAND) == IE_CU_START) 114 /* is this command an action command? */ 115 116 /* Status values */ 117 #define IE_ST_WHENCE 0xf000 /* mask for cause of interrupt */ 118 #define IE_ST_DONE 0x8000 /* command with I bit completed */ 119 #define IE_ST_RECV 0x4000 /* frame received */ 120 #define IE_ST_ALLDONE 0x2000 /* all commands completed */ 121 #define IE_ST_RNR 0x1000 /* receive not ready */ 122 123 #define IE_CU_STATUS 0x700 /* mask for command unit status */ 124 #define IE_CU_ACTIVE 0x200 /* command unit is active */ 125 #define IE_CU_SUSPEND 0x100 /* command unit is suspended */ 126 127 #define IE_RU_STATUS 0x70 /* mask for receiver unit status */ 128 #define IE_RU_SUSPEND 0x10 /* receiver is suspended */ 129 #define IE_RU_NOSPACE 0x20 /* receiver has no resources */ 130 #define IE_RU_READY 0x40 /* reveiver is ready */ 131 132 /* 133 * This is filled in partially by the chip, partially by us. 134 */ 135 struct ie_recv_frame_desc { 136 u_short ie_fd_status; /* status for this frame */ 137 u_short ie_fd_last; /* end of frame list flag */ 138 u_short ie_fd_next; /* 16-pointer to next RFD */ 139 u_short ie_fd_buf_desc; /* 16-pointer to list of buffer desc's */ 140 struct ie_en_addr dest; /* destination ether */ 141 struct ie_en_addr src; /* source ether */ 142 u_short ie_length; /* 802 length/Ether type */ 143 u_short mbz; /* must be zero */ 144 }; 145 146 #define IE_FD_LAST 0x8000 /* last rfd in list */ 147 #define IE_FD_SUSP 0x4000 /* suspend RU after receipt */ 148 149 #define IE_FD_COMPLETE 0x8000 /* frame is complete */ 150 #define IE_FD_BUSY 0x4000 /* frame is busy */ 151 #define IE_FD_OK 0x2000 /* frame is bad */ 152 #define IE_FD_RNR 0x0200 /* receiver out of resources here */ 153 154 /* 155 * linked list of buffers... 156 */ 157 struct ie_recv_buf_desc { 158 u_short ie_rbd_actual; /* status for this buffer */ 159 u_short ie_rbd_next; /* 16-pointer to next RBD */ 160 caddr_t ie_rbd_buffer; /* 24-pointer to buffer for this RBD */ 161 u_short ie_rbd_length; /* length of the buffer */ 162 u_short mbz; /* must be zero */ 163 }; 164 165 #define IE_RBD_LAST 0x8000 /* last buffer */ 166 #define IE_RBD_USED 0x4000 /* this buffer has data */ 167 /* 168 * All commands share this in common. 169 */ 170 struct ie_cmd_common { 171 u_short ie_cmd_status; /* status of this command */ 172 u_short ie_cmd_cmd; /* command word */ 173 u_short ie_cmd_link; /* link to next command */ 174 }; 175 176 #define IE_STAT_COMPL 0x8000 /* command is completed */ 177 #define IE_STAT_BUSY 0x4000 /* command is running now */ 178 #define IE_STAT_OK 0x2000 /* command completed successfully */ 179 180 #define IE_CMD_NOP 0x0000 /* NOP */ 181 #define IE_CMD_IASETUP 0x0001 /* initial address setup */ 182 #define IE_CMD_CONFIG 0x0002 /* configure command */ 183 #define IE_CMD_MCAST 0x0003 /* multicast setup command */ 184 #define IE_CMD_XMIT 0x0004 /* transmit command */ 185 #define IE_CMD_TDR 0x0005 /* time-domain reflectometer command */ 186 #define IE_CMD_DUMP 0x0006 /* dump command */ 187 #define IE_CMD_DIAGNOSE 0x0007 /* diagnostics command */ 188 189 #define IE_CMD_LAST 0x8000 /* this is the last command in the list */ 190 #define IE_CMD_SUSPEND 0x4000 /* suspend CU after this command */ 191 #define IE_CMD_INTR 0x2000 /* post an interrupt after completion */ 192 193 /* 194 * This is the command to transmit a frame. 195 */ 196 struct ie_xmit_cmd { 197 struct ie_cmd_common com; /* common part */ 198 #define ie_xmit_status com.ie_cmd_status 199 200 u_short ie_xmit_desc; /* 16-pointer to buffer descriptor */ 201 struct ie_en_addr ie_xmit_addr; /* destination address */ 202 203 u_short ie_xmit_length; /* 802.3 length/Ether type field */ 204 }; 205 206 #define IE_XS_MAXCOLL 0x000f /* number of collisions during transmit */ 207 #define IE_XS_EXCMAX 0x0020 /* exceeded maximum number of collisions */ 208 #define IE_XS_SQE 0x0040 /* SQE positive */ 209 #define IE_XS_DEFERRED 0x0080 /* transmission deferred */ 210 #define IE_XS_UNDERRUN 0x0100 /* DMA underrun */ 211 #define IE_XS_LOSTCTS 0x0200 /* Lost CTS */ 212 #define IE_XS_NOCARRIER 0x0400 /* No Carrier */ 213 #define IE_XS_LATECOLL 0x0800 /* Late collision */ 214 215 /* 216 * This is a buffer descriptor for a frame to be transmitted. 217 */ 218 219 struct ie_xmit_buf { 220 u_short ie_xmit_flags; /* see below */ 221 u_short ie_xmit_next; /* 16-pointer to next desc. */ 222 caddr_t ie_xmit_buf; /* 24-pointer to the actual buffer */ 223 }; 224 225 #define IE_XMIT_LAST 0x8000 /* this TBD is the last one */ 226 /* The rest of the `flags' word is actually the length. */ 227 228 /* 229 * Multicast setup command. 230 */ 231 232 #define MAXMCAST 50 /* must fit in transmit buffer */ 233 234 struct ie_mcast_cmd { 235 struct ie_cmd_common com; /* common part */ 236 #define ie_mcast_status com.ie_cmd_status 237 238 u_short ie_mcast_bytes; /* size (in bytes) of multicast addresses */ 239 struct ie_en_addr ie_mcast_addrs[MAXMCAST + 1]; /* space for them */ 240 }; 241 242 /* 243 * Time Domain Reflectometer command. 244 */ 245 246 struct ie_tdr_cmd { 247 struct ie_cmd_common com; /* common part */ 248 #define ie_tdr_status com.ie_cmd_status 249 250 u_short ie_tdr_time; /* error bits and time */ 251 }; 252 253 #define IE_TDR_SUCCESS 0x8000 /* TDR succeeded without error */ 254 #define IE_TDR_XCVR 0x4000 /* detected a transceiver problem */ 255 #define IE_TDR_OPEN 0x2000 /* detected an open */ 256 #define IE_TDR_SHORT 0x1000 /* TDR detected a short */ 257 #define IE_TDR_TIME 0x07ff /* mask for reflection time */ 258 259 /* 260 * Initial Address Setup command 261 */ 262 struct ie_iasetup_cmd { 263 struct ie_cmd_common com; 264 #define ie_iasetup_status com.ie_cmd_status 265 266 struct ie_en_addr ie_address; 267 }; 268 269 /* 270 * Configuration command 271 */ 272 struct ie_config_cmd { 273 struct ie_cmd_common com; /* common part */ 274 #define ie_config_status com.ie_cmd_status 275 276 u_char ie_config_count; /* byte count (0x0c) */ 277 u_char ie_fifo; /* fifo (8) */ 278 u_char ie_save_bad; /* save bad frames (0x40) */ 279 u_char ie_addr_len; /* address length (0x2e) (AL-LOC == 1) */ 280 u_char ie_priority; /* priority and backoff (0x0) */ 281 u_char ie_ifs; /* inter-frame spacing (0x60) */ 282 u_char ie_slot_low; /* slot time, LSB (0x0) */ 283 u_char ie_slot_high; /* slot time, MSN, and retries (0xf2) */ 284 u_char ie_promisc; /* 1 if promiscuous, else 0 */ 285 u_char ie_crs_cdt; /* CSMA/CD parameters (0x0) */ 286 u_char ie_min_len; /* min frame length (0x40) */ 287 u_char ie_junk; /* stuff for 82596 (0xff) */ 288 }; 289 290 /* 291 * Here are a few useful functions. We could have done these as macros, 292 * but since we have the inline facility, it makes sense to use that 293 * instead. 294 */ 295 static __inline void 296 ie_setup_config(volatile struct ie_config_cmd *cmd, 297 int promiscuous, int manchester) { 298 cmd->ie_config_count = 0x0c; 299 cmd->ie_fifo = 8; 300 cmd->ie_save_bad = 0x40; 301 cmd->ie_addr_len = 0x2e; 302 cmd->ie_priority = 0; 303 cmd->ie_ifs = 0x60; 304 cmd->ie_slot_low = 0; 305 cmd->ie_slot_high = 0xf2; 306 cmd->ie_promisc = !!promiscuous | manchester << 2; 307 cmd->ie_crs_cdt = 0; 308 cmd->ie_min_len = 64; 309 cmd->ie_junk = 0xff; 310 } 311 312 static __inline void * 313 Align(void *ptr) { 314 uintptr_t l = (uintptr_t)ptr; 315 l = (l + 3) & ~3L; 316 return (void *)l; 317 } 318 319 static __inline volatile void * 320 Alignvol(volatile void *ptr) { 321 uintptr_t l = (uintptr_t)ptr; 322 l = (l + 3) & ~3L; 323 return (volatile void *)l; 324 } 325 326 #if 0 327 static __inline void 328 ie_ack(volatile struct ie_sys_ctl_block *scb, 329 u_int mask, int unit, 330 void (*ca)(int)) { 331 scb->ie_command = scb->ie_status & mask; 332 (*ca)(unit); 333 } 334 #endif 335