1 /* 2 * Copyright (c) 2004-2005 HighPoint Technologies, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 29 #ifndef HPT_INTF_H 30 #define HPT_INTF_H 31 #pragma pack(1) 32 33 /* 34 * Version of this interface. 35 * The user mode application must first issue a hpt_get_version() call to 36 * check HPT_INTERFACE_VERSION. When an utility using newer version interface 37 * is used with old version drivers, it must call only the functions that 38 * driver supported. 39 * A new version interface should only add ioctl functions; it should implement 40 * all old version functions without change their definition. 41 */ 42 #define __this_HPT_INTERFACE_VERSION 0x01010000 43 44 #ifndef HPT_INTERFACE_VERSION 45 #error "You must define HPT_INTERFACE_VERSION you implemented" 46 #endif 47 48 #if HPT_INTERFACE_VERSION > __this_HPT_INTERFACE_VERSION 49 #error "HPT_INTERFACE_VERSION is invalid" 50 #endif 51 52 /* 53 * DEFINITION 54 * Logical device --- a device that can be accessed by OS. 55 * Physical device --- device attached to the controller. 56 * A logical device can be simply a physical device. 57 * 58 * Each logical and physical device has a 32bit ID. GUI will use this ID 59 * to identify devices. 60 * 1. The ID must be unique. 61 * 2. The ID must be immutable. Once an ID is assigned to a device, it 62 * must not change when system is running and the device exists. 63 * 3. The ID of logical device must be NOT reusable. If a device is 64 * removed, other newly created logical device must not use the same ID. 65 * 4. The ID must not be zero or 0xFFFFFFFF. 66 */ 67 typedef DWORD DEVICEID; 68 69 /* 70 * logical device type. 71 * Identify array (logical device) and physical device. 72 */ 73 #define LDT_ARRAY 1 74 #define LDT_DEVICE 2 75 76 /* 77 * Array types 78 * GUI will treat all array as 1-level RAID. No RAID0/1 or RAID1/0. 79 * A RAID0/1 device is type AT_RAID1. A RAID1/0 device is type AT_RAID0. 80 * Their members may be another array of type RAID0 or RAID1. 81 */ 82 #define AT_UNKNOWN 0 83 #define AT_RAID0 1 84 #define AT_RAID1 2 85 #define AT_RAID5 3 86 #define AT_JBOD 7 87 88 /* 89 * physical device type 90 */ 91 #define PDT_UNKNOWN 0 92 #define PDT_HARDDISK 1 93 #define PDT_CDROM 2 94 #define PDT_TAPE 3 95 96 /* 97 * Some constants. 98 */ 99 #define MAX_NAME_LENGTH 36 100 #define MAX_ARRAYNAME_LEN 16 101 102 #define MAX_ARRAY_MEMBERS_V1 8 103 #define MAX_ARRAY_MEMBERS_V2 16 104 /* keep definition for source code compatiblity */ 105 #define MAX_ARRAY_MEMBERS MAX_ARRAY_MEMBERS_V1 106 107 /* 108 * io commands 109 * GUI use these commands to do IO on logical/physical devices. 110 */ 111 #define IO_COMMAND_READ 1 112 #define IO_COMMAND_WRITE 2 113 114 /* 115 * array flags 116 */ 117 #define ARRAY_FLAG_DISABLED 0x00000001 /* The array is disabled */ 118 #define ARRAY_FLAG_NEEDBUILDING 0x00000002 /* array need synchronizing */ 119 #define ARRAY_FLAG_REBUILDING 0x00000004 /* array is in rebuilding process */ 120 #define ARRAY_FLAG_BROKEN 0x00000008 /* broken but may still working */ 121 #define ARRAY_FLAG_BOOTDISK 0x00000010 /* array has a active partition */ 122 #define ARRAY_FLAG_NEWLY_CREATED 0x00000020 /* a newly created array */ 123 #define ARRAY_FLAG_BOOTMARK 0x00000040 /* array has boot mark set */ 124 #define ARRAY_FLAG_NEED_AUTOREBUILD 0x00000080 /* auto-rebuild should start */ 125 #define ARRAY_FLAG_VERIFYING 0x00000100 /* is being verified */ 126 #define ARRAY_FLAG_INITIALIZING 0x00000200 /* is being initialized */ 127 #define ARRAY_FLAG_RAID15PLUS 0x80000000 /* display this RAID 1 as RAID 1.5 */ 128 129 /* 130 * device flags 131 */ 132 #define DEVICE_FLAG_DISABLED 0x00000001 /* device is disabled */ 133 #define DEVICE_FLAG_BOOTDISK 0x00000002 /* disk has a active partition */ 134 #define DEVICE_FLAG_BOOTMARK 0x00000004 /* disk has boot mark set */ 135 #define DEVICE_FLAG_WITH_601 0x00000008 /* has HPT601 connected */ 136 #define DEVICE_FLAG_SATA 0x00000010 /* S-ATA device */ 137 #define DEVICE_FLAG_IS_SPARE 0x80000000 /* is a spare disk */ 138 139 /* 140 * array states used by hpt_set_array_state() 141 */ 142 /* old defines */ 143 #define MIRROR_REBUILD_START 1 144 #define MIRROR_REBUILD_ABORT 2 145 #define MIRROR_REBUILD_COMPLETE 3 146 /* new defines */ 147 #define AS_REBUILD_START 1 148 #define AS_REBUILD_ABORT 2 149 #define AS_REBUILD_PAUSE AS_REBUILD_ABORT 150 #define AS_REBUILD_COMPLETE 3 151 #define AS_VERIFY_START 4 152 #define AS_VERIFY_ABORT 5 153 #define AS_VERIFY_COMPLETE 6 154 #define AS_INITIALIZE_START 7 155 #define AS_INITIALIZE_ABORT 8 156 #define AS_INITIALIZE_COMPLETE 9 157 #define AS_VERIFY_FAILED 10 158 #define AS_REBUILD_STOP 11 159 #define AS_SAVE_STATE 12 160 /************************************************************************ 161 * ioctl code 162 * It would be better if ioctl code are the same on different platforms, 163 * but we must not conflict with system defined ioctl code. 164 ************************************************************************/ 165 #if defined(LINUX) || defined(__FreeBSD_version) 166 #define HPT_CTL_CODE(x) (x+0xFF00) 167 #elif defined(_MS_WIN32_) || defined(WIN32) 168 169 #ifndef CTL_CODE 170 #define CTL_CODE( DeviceType, Function, Method, Access ) \ 171 (((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method)) 172 #endif 173 #define HPT_CTL_CODE(x) CTL_CODE(0x370, 0x900+(x), 0, 0) 174 #define HPT_CTL_CODE_WIN32_TO_I960(x) ((((x) & 0xffff)>>2)-0x900) 175 176 #else 177 #define HPT_CTL_CODE(x) (x) 178 #endif 179 180 #define HPT_IOCTL_GET_VERSION HPT_CTL_CODE(0) 181 #define HPT_IOCTL_GET_CONTROLLER_COUNT HPT_CTL_CODE(1) 182 #define HPT_IOCTL_GET_CONTROLLER_INFO HPT_CTL_CODE(2) 183 #define HPT_IOCTL_GET_CHANNEL_INFO HPT_CTL_CODE(3) 184 #define HPT_IOCTL_GET_LOGICAL_DEVICES HPT_CTL_CODE(4) 185 #define HPT_IOCTL_GET_DEVICE_INFO HPT_CTL_CODE(5) 186 #define HPT_IOCTL_CREATE_ARRAY HPT_CTL_CODE(6) 187 #define HPT_IOCTL_DELETE_ARRAY HPT_CTL_CODE(7) 188 #define HPT_IOCTL_ARRAY_IO HPT_CTL_CODE(8) 189 #define HPT_IOCTL_DEVICE_IO HPT_CTL_CODE(9) 190 #define HPT_IOCTL_GET_EVENT HPT_CTL_CODE(10) 191 #define HPT_IOCTL_REBUILD_MIRROR HPT_CTL_CODE(11) 192 /* use HPT_IOCTL_REBUILD_DATA_BLOCK from now on */ 193 #define HPT_IOCTL_REBUILD_DATA_BLOCK HPT_IOCTL_REBUILD_MIRROR 194 #define HPT_IOCTL_ADD_SPARE_DISK HPT_CTL_CODE(12) 195 #define HPT_IOCTL_REMOVE_SPARE_DISK HPT_CTL_CODE(13) 196 #define HPT_IOCTL_ADD_DISK_TO_ARRAY HPT_CTL_CODE(14) 197 #define HPT_IOCTL_SET_ARRAY_STATE HPT_CTL_CODE(15) 198 #define HPT_IOCTL_SET_ARRAY_INFO HPT_CTL_CODE(16) 199 #define HPT_IOCTL_SET_DEVICE_INFO HPT_CTL_CODE(17) 200 #define HPT_IOCTL_RESCAN_DEVICES HPT_CTL_CODE(18) 201 #define HPT_IOCTL_GET_DRIVER_CAPABILITIES HPT_CTL_CODE(19) 202 #define HPT_IOCTL_GET_601_INFO HPT_CTL_CODE(20) 203 #define HPT_IOCTL_SET_601_INFO HPT_CTL_CODE(21) 204 #define HPT_IOCTL_LOCK_DEVICE HPT_CTL_CODE(22) 205 #define HPT_IOCTL_UNLOCK_DEVICE HPT_CTL_CODE(23) 206 #define HPT_IOCTL_IDE_PASS_THROUGH HPT_CTL_CODE(24) 207 #define HPT_IOCTL_VERIFY_DATA_BLOCK HPT_CTL_CODE(25) 208 #define HPT_IOCTL_INITIALIZE_DATA_BLOCK HPT_CTL_CODE(26) 209 #define HPT_IOCTL_ADD_DEDICATED_SPARE HPT_CTL_CODE(27) 210 #define HPT_IOCTL_DEVICE_IO_EX HPT_CTL_CODE(28) 211 #define HPT_IOCTL_SET_BOOT_MARK HPT_CTL_CODE(29) 212 #define HPT_IOCTL_QUERY_REMOVE HPT_CTL_CODE(30) 213 #define HPT_IOCTL_REMOVE_DEVICES HPT_CTL_CODE(31) 214 #define HPT_IOCTL_CREATE_ARRAY_V2 HPT_CTL_CODE(32) 215 #define HPT_IOCTL_GET_DEVICE_INFO_V2 HPT_CTL_CODE(33) 216 #define HPT_IOCTL_SET_DEVICE_INFO_V2 HPT_CTL_CODE(34) 217 #define HPT_IOCTL_REBUILD_DATA_BLOCK_V2 HPT_CTL_CODE(35) 218 #define HPT_IOCTL_VERIFY_DATA_BLOCK_V2 HPT_CTL_CODE(36) 219 #define HPT_IOCTL_INITIALIZE_DATA_BLOCK_V2 HPT_CTL_CODE(37) 220 #define HPT_IOCTL_LOCK_DEVICE_V2 HPT_CTL_CODE(38) 221 #define HPT_IOCTL_DEVICE_IO_V2 HPT_CTL_CODE(39) 222 #define HPT_IOCTL_DEVICE_IO_EX_V2 HPT_CTL_CODE(40) 223 224 #define HPT_IOCTL_I2C_TRANSACTION HPT_CTL_CODE(48) 225 #define HPT_IOCTL_GET_PARAMETER_LIST HPT_CTL_CODE(49) 226 #define HPT_IOCTL_GET_PARAMETER HPT_CTL_CODE(50) 227 #define HPT_IOCTL_SET_PARAMETER HPT_CTL_CODE(51) 228 229 /* Windows only */ 230 #define HPT_IOCTL_GET_CONTROLLER_IDS HPT_CTL_CODE(100) 231 #define HPT_IOCTL_GET_DCB HPT_CTL_CODE(101) 232 #define HPT_IOCTL_EPROM_IO HPT_CTL_CODE(102) 233 #define HPT_IOCTL_GET_CONTROLLER_VENID HPT_CTL_CODE(103) 234 235 /************************************************************************ 236 * shared data structures 237 ************************************************************************/ 238 239 /* 240 * Chip Type 241 */ 242 #define CHIP_TYPE_HPT366 1 243 #define CHIP_TYPE_HPT368 2 244 #define CHIP_TYPE_HPT370 3 245 #define CHIP_TYPE_HPT370A 4 246 #define CHIP_TYPE_HPT370B 5 247 #define CHIP_TYPE_HPT374 6 248 #define CHIP_TYPE_HPT372 7 249 #define CHIP_TYPE_HPT372A 8 250 #define CHIP_TYPE_HPT302 9 251 #define CHIP_TYPE_HPT371 10 252 #define CHIP_TYPE_HPT372N 11 253 #define CHIP_TYPE_HPT302N 12 254 #define CHIP_TYPE_HPT371N 13 255 #define CHIP_TYPE_SI3112A 14 256 #define CHIP_TYPE_ICH5 15 257 #define CHIP_TYPE_ICH5R 16 258 259 /* 260 * Chip Flags 261 */ 262 #define CHIP_SUPPORT_ULTRA_66 0x20 263 #define CHIP_SUPPORT_ULTRA_100 0x40 264 #define CHIP_HPT3XX_DPLL_MODE 0x80 265 #define CHIP_SUPPORT_ULTRA_133 0x01 266 #define CHIP_SUPPORT_ULTRA_150 0x02 267 268 typedef struct _DRIVER_CAPABILITIES { 269 DWORD dwSize; 270 271 UCHAR MaximumControllers; /* maximum controllers the driver can support */ 272 UCHAR SupportCrossControllerRAID; /* 1-support, 0-not support */ 273 UCHAR MinimumBlockSizeShift; /* minimum block size shift */ 274 UCHAR MaximumBlockSizeShift; /* maximum block size shift */ 275 276 UCHAR SupportDiskModeSetting; 277 UCHAR SupportSparePool; 278 UCHAR MaximumArrayNameLength; 279 /* only one byte left here! */ 280 #ifdef __BIG_ENDIAN_BITFIELD 281 UCHAR reserved: 4; 282 UCHAR SupportHotSwap: 1; 283 UCHAR HighPerformanceRAID1: 1; 284 UCHAR RebuildProcessInDriver: 1; 285 UCHAR SupportDedicatedSpare: 1; 286 #else 287 UCHAR SupportDedicatedSpare: 1; /* call hpt_add_dedicated_spare() for dedicated spare. */ 288 UCHAR RebuildProcessInDriver: 1; /* Windows only. used by mid layer for rebuild control. */ 289 UCHAR HighPerformanceRAID1: 1; /* Support RAID1.5 */ 290 UCHAR SupportHotSwap: 1; 291 UCHAR reserved: 4; 292 #endif 293 294 /* SupportedRAIDTypes is an array of bytes, one of each is an array type. 295 * Only non-zero values is valid. Bit0-3 represents the lower(child) level RAID type; 296 * bit4-7 represents the top level. i.e. 297 * RAID 0/1 is (AT_RAID1<<4) | AT_RAID0 298 * RAID 5/0 is (AT_RAID0<<4) | AT_RAID5 299 */ 300 UCHAR SupportedRAIDTypes[16]; 301 /* maximum members in an array corresponding to SupportedRAIDTypes */ 302 UCHAR MaximumArrayMembers[16]; 303 } 304 DRIVER_CAPABILITIES, *PDRIVER_CAPABILITIES; 305 306 /* 307 * Controller information. 308 */ 309 typedef struct _CONTROLLER_INFO { 310 UCHAR ChipType; /* chip type */ 311 UCHAR InterruptLevel; /* IRQ level */ 312 UCHAR NumBuses; /* bus count */ 313 UCHAR ChipFlags; 314 315 UCHAR szProductID[MAX_NAME_LENGTH]; /* product name */ 316 UCHAR szVendorID[MAX_NAME_LENGTH]; /* vender name */ 317 318 } CONTROLLER_INFO, *PCONTROLLER_INFO; 319 320 /* 321 * Channel information. 322 */ 323 typedef struct _CHANNEL_INFO { 324 ULONG IoPort; /* IDE Base Port Address */ 325 ULONG ControlPort; /* IDE Control Port Address */ 326 327 DEVICEID Devices[2]; /* device connected to this channel */ 328 329 } CHANNEL_INFO, *PCHANNEL_INFO; 330 331 /* 332 * time represented in DWORD format 333 */ 334 #ifndef __KERNEL__ 335 typedef struct _TIME_RECORD { 336 UINT seconds:6; /* 0 - 59 */ 337 UINT minutes:6; /* 0 - 59 */ 338 UINT month:4; /* 1 - 12 */ 339 UINT hours:6; /* 0 - 59 */ 340 UINT day:5; /* 1 - 31 */ 341 UINT year:5; /* 0=2000, 31=2031 */ 342 } TIME_RECORD; 343 #endif 344 345 /* 346 * Array information. 347 */ 348 typedef struct _HPT_ARRAY_INFO { 349 UCHAR Name[MAX_ARRAYNAME_LEN];/* array name */ 350 UCHAR Description[64]; /* array description */ 351 UCHAR CreateManager[16]; /* who created it */ 352 TIME_RECORD CreateTime; /* when created it */ 353 354 UCHAR ArrayType; /* array type */ 355 UCHAR BlockSizeShift; /* stripe size */ 356 UCHAR nDisk; /* member count: Number of ID in Members[] */ 357 UCHAR reserved; 358 359 DWORD Flags; /* working flags, see ARRAY_FLAG_XXX */ 360 DWORD Members[MAX_ARRAY_MEMBERS_V1]; /* member array/disks */ 361 362 /* 363 * rebuilding progress, xx.xx% = sprintf(s, "%.2f%%", RebuildingProgress/100.0); 364 * only valid if rebuilding is done by driver code. 365 * Member Flags will have ARRAY_FLAG_REBUILDING set at this case. 366 * Verify operation use same fields below, the only difference is 367 * ARRAY_FLAG_VERIFYING is set. 368 */ 369 DWORD RebuildingProgress; 370 DWORD RebuiltSectors; /* rebuilding point (LBA) for single member */ 371 372 } HPT_ARRAY_INFO, *PHPT_ARRAY_INFO; /*LDX modify ARRAY_INFO TO HPT_ARRAY_INFO to avoid compiling error in Windows*/ 373 374 #if HPT_INTERFACE_VERSION>=0x01010000 375 typedef struct _LBA64 { 376 #ifdef __BIG_ENDIAN_BITFIELD 377 DWORD hi32; 378 DWORD lo32; 379 #else 380 DWORD lo32; 381 DWORD hi32; 382 #endif 383 } 384 LBA64; 385 typedef struct _HPT_ARRAY_INFO_V2 { 386 UCHAR Name[MAX_ARRAYNAME_LEN];/* array name */ 387 UCHAR Description[64]; /* array description */ 388 UCHAR CreateManager[16]; /* who created it */ 389 TIME_RECORD CreateTime; /* when created it */ 390 391 UCHAR ArrayType; /* array type */ 392 UCHAR BlockSizeShift; /* stripe size */ 393 UCHAR nDisk; /* member count: Number of ID in Members[] */ 394 UCHAR reserved; 395 396 DWORD Flags; /* working flags, see ARRAY_FLAG_XXX */ 397 DWORD Members[MAX_ARRAY_MEMBERS_V2]; /* member array/disks */ 398 399 DWORD RebuildingProgress; 400 LBA64 RebuiltSectors; /* rebuilding point (LBA) for single member */ 401 402 DWORD reserve4[4]; 403 404 } HPT_ARRAY_INFO_V2, *PHPT_ARRAY_INFO_V2; 405 #endif 406 407 /* 408 * ATA/ATAPI Device identify data without the Reserved4. 409 */ 410 #ifndef __KERNEL__ 411 typedef struct _IDENTIFY_DATA2 { 412 USHORT GeneralConfiguration; /* 00 00 */ 413 USHORT NumberOfCylinders; /* 02 1 */ 414 USHORT Reserved1; /* 04 2 */ 415 USHORT NumberOfHeads; /* 06 3 */ 416 USHORT UnformattedBytesPerTrack; /* 08 4 */ 417 USHORT UnformattedBytesPerSector; /* 0A 5 */ 418 USHORT SectorsPerTrack; /* 0C 6 */ 419 USHORT VendorUnique1[3]; /* 0E 7-9 */ 420 USHORT SerialNumber[10]; /* 14 10-19 */ 421 USHORT BufferType; /* 28 20 */ 422 USHORT BufferSectorSize; /* 2A 21 */ 423 USHORT NumberOfEccBytes; /* 2C 22 */ 424 USHORT FirmwareRevision[4]; /* 2E 23-26 */ 425 USHORT ModelNumber[20]; /* 36 27-46 */ 426 UCHAR MaximumBlockTransfer; /* 5E 47 */ 427 UCHAR VendorUnique2; /* 5F */ 428 USHORT DoubleWordIo; /* 60 48 */ 429 USHORT Capabilities; /* 62 49 */ 430 USHORT Reserved2; /* 64 50 */ 431 UCHAR VendorUnique3; /* 66 51 */ 432 UCHAR PioCycleTimingMode; /* 67 */ 433 UCHAR VendorUnique4; /* 68 52 */ 434 UCHAR DmaCycleTimingMode; /* 69 */ 435 USHORT TranslationFieldsValid:1; /* 6A 53 */ 436 USHORT Reserved3:15; 437 USHORT NumberOfCurrentCylinders; /* 6C 54 */ 438 USHORT NumberOfCurrentHeads; /* 6E 55 */ 439 USHORT CurrentSectorsPerTrack; /* 70 56 */ 440 ULONG CurrentSectorCapacity; /* 72 57-58 */ 441 USHORT CurrentMultiSectorSetting; /* 59 */ 442 ULONG UserAddressableSectors; /* 60-61 */ 443 USHORT SingleWordDMASupport : 8; /* 62 */ 444 USHORT SingleWordDMAActive : 8; 445 USHORT MultiWordDMASupport : 8; /* 63 */ 446 USHORT MultiWordDMAActive : 8; 447 USHORT AdvancedPIOModes : 8; /* 64 */ 448 USHORT Reserved4 : 8; 449 USHORT MinimumMWXferCycleTime; /* 65 */ 450 USHORT RecommendedMWXferCycleTime; /* 66 */ 451 USHORT MinimumPIOCycleTime; /* 67 */ 452 USHORT MinimumPIOCycleTimeIORDY; /* 68 */ 453 USHORT Reserved5[2]; /* 69-70 */ 454 USHORT ReleaseTimeOverlapped; /* 71 */ 455 USHORT ReleaseTimeServiceCommand; /* 72 */ 456 USHORT MajorRevision; /* 73 */ 457 USHORT MinorRevision; /* 74 */ 458 /* USHORT Reserved6[14]; // 75-88 */ 459 } IDENTIFY_DATA2, *PIDENTIFY_DATA2; 460 #endif 461 462 /* 463 * physical device information. 464 * IdentifyData.ModelNumber[] is byte-swapped from the original identify data. 465 */ 466 typedef struct _DEVICE_INFO { 467 UCHAR ControllerId; /* controller id */ 468 UCHAR PathId; /* bus */ 469 UCHAR TargetId; /* id */ 470 UCHAR DeviceModeSetting; /* Current Data Transfer mode: 0-4 PIO 0-4 */ 471 /* 5-7 MW DMA0-2, 8-13 UDMA0-5 */ 472 UCHAR DeviceType; /* device type */ 473 UCHAR UsableMode; /* highest usable mode */ 474 475 UCHAR ReadAheadSupported: 1; 476 UCHAR ReadAheadEnabled: 1; 477 UCHAR WriteCacheSupported: 1; 478 UCHAR WriteCacheEnabled: 1; 479 UCHAR TCQSupported: 1; 480 UCHAR TCQEnabled: 1; 481 UCHAR NCQSupported: 1; 482 UCHAR NCQEnabled: 1; 483 UCHAR reserved; 484 485 DWORD Flags; /* working flags, see DEVICE_FLAG_XXX */ 486 487 IDENTIFY_DATA2 IdentifyData; /* Identify Data of this device */ 488 489 } DEVICE_INFO, *PDEVICE_INFO; 490 491 /* 492 * HPT601 information 493 */ 494 #define HPT601_INFO_DEVICEID 1 495 #define HPT601_INFO_TEMPERATURE 2 496 #define HPT601_INFO_FANSTATUS 4 497 #define HPT601_INFO_BEEPERCONTROL 8 498 #define HPT601_INFO_LED1CONTROL 0x10 499 #define HPT601_INFO_LED2CONTROL 0x20 500 #define HPT601_INFO_POWERSTATUS 0x40 501 502 typedef struct _HPT601_INFO { 503 WORD ValidFields; /* mark valid fields below */ 504 WORD DeviceId; /* 0x5A3E */ 505 WORD Temperature; /* Read: temperature sensor value. Write: temperature limit */ 506 WORD FanStatus; /* Fan status */ 507 WORD BeeperControl; /* bit4: beeper control bit. bit0-3: frequency bits */ 508 WORD LED1Control; /* bit4: twinkling control bit. bit0-3: frequency bits */ 509 WORD LED2Control; /* bit4: twinkling control bit. bit0-3: frequency bits */ 510 WORD PowerStatus; /* 1: has power 2: no power */ 511 } HPT601_INFO, *PHPT601_INFO; 512 513 /* 514 * Logical device information. 515 * Union of ArrayInfo and DeviceInfo. 516 * Common properties will be put in logical device information. 517 */ 518 typedef struct _LOGICAL_DEVICE_INFO { 519 UCHAR Type; /* LDT_ARRAY or LDT_DEVICE */ 520 UCHAR reserved[3]; 521 522 DWORD Capacity; /* array capacity */ 523 DEVICEID ParentArray; 524 525 union { 526 HPT_ARRAY_INFO array; 527 DEVICE_INFO device; 528 } u; 529 530 } LOGICAL_DEVICE_INFO, *PLOGICAL_DEVICE_INFO; 531 532 #if HPT_INTERFACE_VERSION>=0x01010000 533 typedef struct _LOGICAL_DEVICE_INFO_V2 { 534 UCHAR Type; /* LDT_ARRAY or LDT_DEVICE */ 535 UCHAR reserved[3]; 536 537 LBA64 Capacity; /* array capacity */ 538 DEVICEID ParentArray; 539 540 union { 541 HPT_ARRAY_INFO_V2 array; 542 DEVICE_INFO device; 543 } u; 544 545 } LOGICAL_DEVICE_INFO_V2, *PLOGICAL_DEVICE_INFO_V2; 546 #endif 547 548 /* 549 * ALTERABLE_ARRAY_INFO and ALTERABLE_DEVICE_INFO, used in set_array_info() 550 * and set_device_info(). 551 * When set_xxx_info() is called, the ValidFields member indicates which 552 * fields in the structure are valid. 553 */ 554 /* field masks */ 555 #define AAIF_NAME 1 556 #define AAIF_DESCRIPTION 2 557 #define ADIF_MODE 1 558 #define ADIF_TCQ 2 559 #define ADIF_NCQ 4 560 #define ADIF_WRITE_CACHE 8 561 #define ADIF_READ_AHEAD 0x10 562 563 typedef struct _ALTERABLE_ARRAY_INFO { 564 DWORD ValidFields; /* mark valid fields below */ 565 UCHAR Name[MAX_ARRAYNAME_LEN]; /* array name */ 566 UCHAR Description[64]; /* array description */ 567 } 568 ALTERABLE_ARRAY_INFO, *PALTERABLE_ARRAY_INFO; 569 570 typedef struct _ALTERABLE_DEVICE_INFO { 571 DWORD ValidFields; /* mark valid fields below */ 572 UCHAR DeviceModeSetting; /* 0-4 PIO 0-4, 5-7 MW DMA0-2, 8-13 UDMA0-5 */ 573 } 574 ALTERABLE_DEVICE_INFO, *PALTERABLE_DEVICE_INFO; 575 576 typedef struct _ALTERABLE_DEVICE_INFO_V2 { 577 DWORD ValidFields; /* mark valid fields below */ 578 UCHAR DeviceModeSetting; /* 0-4 PIO 0-4, 5-7 MW DMA0-2, 8-13 UDMA0-5 */ 579 UCHAR TCQEnabled; 580 UCHAR NCQEnabled; 581 UCHAR WriteCacheEnabled; 582 UCHAR ReadAheadEnabled; 583 UCHAR reserve[3]; 584 ULONG reserve2[13]; /* pad to 64 bytes */ 585 } 586 ALTERABLE_DEVICE_INFO_V2, *PALTERABLE_DEVICE_INFO_V2; 587 588 /* 589 * CREATE_ARRAY_PARAMS 590 * Param structure used to create an array. 591 */ 592 typedef struct _CREATE_ARRAY_PARAMS { 593 UCHAR ArrayType; /* 1-level array type */ 594 UCHAR nDisk; /* number of elements in Members[] array */ 595 UCHAR BlockSizeShift; /* Stripe size if ArrayType==AT_RAID0 / AT_RAID5 */ 596 UCHAR CreateFlags; /* See CAF_xxx */ 597 598 UCHAR ArrayName[MAX_ARRAYNAME_LEN]; /* Array name */ 599 UCHAR Description[64]; /* array description */ 600 UCHAR CreateManager[16]; /* who created it */ 601 TIME_RECORD CreateTime; /* when created it */ 602 603 DWORD Members[MAX_ARRAY_MEMBERS_V1];/* ID of array members, a member can be an array */ 604 605 } CREATE_ARRAY_PARAMS, *PCREATE_ARRAY_PARAMS; 606 607 #if HPT_INTERFACE_VERSION>=0x01010000 608 typedef struct _CREATE_ARRAY_PARAMS_V2 { 609 UCHAR ArrayType; /* 1-level array type */ 610 UCHAR nDisk; /* number of elements in Members[] array */ 611 UCHAR BlockSizeShift; /* Stripe size if ArrayType==AT_RAID0 / AT_RAID5 */ 612 UCHAR CreateFlags; /* See CAF_xxx */ 613 614 UCHAR ArrayName[MAX_ARRAYNAME_LEN]; /* Array name */ 615 UCHAR Description[64]; /* array description */ 616 UCHAR CreateManager[16]; /* who created it */ 617 TIME_RECORD CreateTime; /* when created it */ 618 LBA64 Capacity; /* specify array capacity (0 for default) */ 619 620 DWORD Members[MAX_ARRAY_MEMBERS_V2];/* ID of array members, a member can be an array */ 621 622 } CREATE_ARRAY_PARAMS_V2, *PCREATE_ARRAY_PARAMS_V2; 623 #endif 624 625 /* 626 * Flags used for creating an RAID 1 array 627 * 628 * CAF_CREATE_AND_DUPLICATE 629 * Copy source disk contents to target for RAID 1. If user choose "create and duplicate" 630 * to create an array, GUI will call CreateArray() with this flag set. Then GUI should 631 * call hpt_get_device_info() with the returned array ID and check returned flags to 632 * see if ARRAY_FLAG_REBUILDING is set. If not set, driver does not support rebuilding 633 * and GUI must do duplication itself. 634 * CAF_DUPLICATE_MUST_DONE 635 * If the duplication is aborted or fails, do not create the array. 636 */ 637 #define CAF_CREATE_AND_DUPLICATE 1 638 #define CAF_DUPLICATE_MUST_DONE 2 639 #define CAF_CREATE_AS_RAID15 4 640 /* 641 * Flags used for creating an RAID 5 array 642 */ 643 #define CAF_CREATE_R5_NO_BUILD 1 644 #define CAF_CREATE_R5_ZERO_INIT 2 645 #define CAF_CREATE_R5_BUILD_PARITY 4 646 647 /* 648 * Flags used for deleting an array 649 * 650 * DAF_KEEP_DATA_IF_POSSIBLE 651 * If this flag is set, deleting a RAID 1 array will not destroy the data on both disks. 652 * Deleting a JBOD should keep partitions on first disk ( not implement now ). 653 * Deleting a RAID 0/1 should result as two RAID 0 array ( not implement now ). 654 */ 655 #define DAF_KEEP_DATA_IF_POSSIBLE 1 656 657 /* 658 * event types 659 */ 660 #define ET_DEVICE_REMOVED 1 /* device removed */ 661 #define ET_DEVICE_PLUGGED 2 /* device plugged */ 662 #define ET_DEVICE_ERROR 3 /* device I/O error */ 663 #define ET_REBUILD_STARTED 4 664 #define ET_REBUILD_ABORTED 5 665 #define ET_REBUILD_FINISHED 6 666 #define ET_SPARE_TOOK_OVER 7 667 #define ET_REBUILD_FAILED 8 668 #define ET_VERIFY_STARTED 9 669 #define ET_VERIFY_ABORTED 10 670 #define ET_VERIFY_FAILED 11 671 #define ET_VERIFY_FINISHED 12 672 #define ET_INITIALIZE_STARTED 13 673 #define ET_INITIALIZE_ABORTED 14 674 #define ET_INITIALIZE_FAILED 15 675 #define ET_INITIALIZE_FINISHED 16 676 #define ET_VERIFY_DATA_ERROR 17 677 678 /* 679 * event structure 680 */ 681 typedef struct _HPT_EVENT { 682 TIME_RECORD Time; 683 DEVICEID DeviceID; 684 UCHAR EventType; 685 UCHAR reserved[3]; 686 687 UCHAR Data[32]; /* various data depend on EventType */ 688 } HPT_EVENT, *PHPT_EVENT; 689 690 /* 691 * IDE pass-through command. Use it at your own risk! 692 */ 693 #ifdef _MSC_VER 694 #pragma warning(disable:4200) 695 #endif 696 typedef struct _IDE_PASS_THROUGH_HEADER { 697 DEVICEID idDisk; /* disk ID */ 698 BYTE bFeaturesReg; /* feature register */ 699 BYTE bSectorCountReg; /* IDE sector count register. */ 700 BYTE bLbaLowReg; /* IDE sector number register. */ 701 BYTE bLbaMidReg; /* IDE low order cylinder value. */ 702 BYTE bLbaHighReg; /* IDE high order cylinder value. */ 703 BYTE bDriveHeadReg; /* IDE drive/head register. */ 704 BYTE bCommandReg; /* Actual IDE command. Checked for validity by driver. */ 705 BYTE nSectors; /* data sze in sectors, if the command has data transfer */ 706 BYTE protocol; /* IO_COMMAND_(READ,WRITE) or zero for non-DATA */ 707 BYTE reserve[3]; 708 #define IDE_PASS_THROUGH_buffer(p) ((unsigned char *)(p) + sizeof(IDE_PASS_THROUGH_HEADER)) 709 } 710 IDE_PASS_THROUGH_HEADER, *PIDE_PASS_THROUGH_HEADER; 711 712 /* 713 * device io packet format 714 */ 715 typedef struct _DEVICE_IO_EX_PARAMS { 716 DEVICEID idDisk; 717 ULONG Lba; 718 USHORT nSectors; 719 UCHAR Command; /* IO_COMMAD_xxx */ 720 UCHAR BufferType; /* BUFFER_TYPE_xxx, see below */ 721 ULONG BufferPtr; 722 } 723 DEVICE_IO_EX_PARAMS, *PDEVICE_IO_EX_PARAMS; 724 725 #define BUFFER_TYPE_LOGICAL 1 /* logical pointer to buffer */ 726 #define BUFFER_TYPE_PHYSICAL 2 /* physical address of buffer */ 727 #define BUFFER_TYPE_LOGICAL_LOGICAL_SG 3 /* logical pointer to logical S/G table */ 728 #define BUFFER_TYPE_LOGICAL_PHYSICAL_SG 4 /* logical pointer to physical S/G table */ 729 #define BUFFER_TYPE_PHYSICAL_LOGICAL_SG 5 /* physical address to logical S/G table */ 730 #define BUFFER_TYPE_PHYSICAL_PHYSICAL_SG 6 /* physical address of physical S/G table */ 731 #define BUFFER_TYPE_PHYSICAL_PHYSICAL_SG_PIO 7 /* non DMA capable physical address of physical S/G table */ 732 733 /* 734 * all ioctl functions should use far pointers. It's not a problem on 735 * 32bit platforms, however, BIOS needs care. 736 */ 737 738 /* 739 * ioctl structure 740 */ 741 #define HPT_IOCTL_MAGIC32 0x1A2B3C4D 742 #define HPT_IOCTL_MAGIC 0xA1B2C3D4 743 744 typedef struct _HPT_IOCTL_PARAM { 745 DWORD Magic; /* used to check if it's a valid ioctl packet */ 746 DWORD dwIoControlCode; /* operation control code */ 747 LPVOID lpInBuffer; /* input data buffer */ 748 DWORD nInBufferSize; /* size of input data buffer */ 749 LPVOID lpOutBuffer; /* output data buffer */ 750 DWORD nOutBufferSize; /* size of output data buffer */ 751 LPDWORD lpBytesReturned; /* count of bytes returned */ 752 } 753 HPT_IOCTL_PARAM, *PHPT_IOCTL_PARAM; 754 755 /* for 32-bit app running on 64-bit system */ 756 typedef struct _HPT_IOCTL_PARAM32 { 757 DWORD Magic; 758 DWORD dwIoControlCode; 759 DWORD lpInBuffer; 760 DWORD nInBufferSize; 761 DWORD lpOutBuffer; 762 DWORD nOutBufferSize; 763 DWORD lpBytesReturned; 764 } 765 HPT_IOCTL_PARAM32, *PHPT_IOCTL_PARAM32; 766 767 /* 768 * User-mode ioctl parameter passing conventions: 769 * The ioctl function implementation is platform specific, so we don't 770 * have forced rules for it. However, it's suggested to use a parameter 771 * passing method as below 772 * 1) Put all input data continuously in an input buffer. 773 * 2) Prepare an output buffer with enough size if needed. 774 * 3) Fill a HPT_IOCTL_PARAM structure. 775 * 4) Pass the structure to driver through a platform-specific method. 776 * This is implemented in the mid-layer user-mode library. The UI 777 * programmer needn't care about it. 778 */ 779 780 /************************************************************************ 781 * User mode functions 782 ************************************************************************/ 783 #ifndef __KERNEL__ 784 /* 785 * hpt_get_version 786 * Version compatibility: all versions 787 * Parameters: 788 * None 789 * Returns: 790 * interface version. 0 when fail. 791 */ 792 DWORD hpt_get_version(); 793 794 /*-------------------------------------------------------------------------- */ 795 796 /* 797 * hpt_get_driver_capabilities 798 * Version compatibility: v1.0.0.2 or later 799 * Parameters: 800 * Pointer to receive a DRIVE_CAPABILITIES structure. The caller must set 801 * dwSize member to sizeof(DRIVER_CAPABILITIES). The callee must check this 802 * member to see if it's correct. 803 * Returns: 804 * 0 - Success 805 */ 806 int hpt_get_driver_capabilities(PDRIVER_CAPABILITIES cap); 807 808 /*-------------------------------------------------------------------------- */ 809 810 /* 811 * hpt_get_controller_count 812 * Version compatibility: v1.0.0.1 or later 813 * Parameters: 814 * None 815 * Returns: 816 * number of controllers 817 */ 818 int hpt_get_controller_count(); 819 820 /*-------------------------------------------------------------------------- */ 821 822 /* hpt_get_controller_info 823 * Version compatibility: v1.0.0.1 or later 824 * Parameters: 825 * id Controller id 826 * pInfo pointer to CONTROLLER_INFO buffer 827 * Returns: 828 * 0 Success, controller info is put into (*pInfo ). 829 */ 830 int hpt_get_controller_info(int id, PCONTROLLER_INFO pInfo); 831 832 /*-------------------------------------------------------------------------- */ 833 834 /* hpt_get_channel_info 835 * Version compatibility: v1.0.0.1 or later 836 * Parameters: 837 * id Controller id 838 * bus bus number 839 * pInfo pointer to CHANNEL_INFO buffer 840 * Returns: 841 * 0 Success, channel info is put into (*pInfo ). 842 */ 843 int hpt_get_channel_info(int id, int bus, PCHANNEL_INFO pInfo); 844 845 /*-------------------------------------------------------------------------- */ 846 847 /* hpt_get_logical_devices 848 * Version compatibility: v1.0.0.1 or later 849 * Parameters: 850 * pIds pointer to a DEVICEID array 851 * nMaxCount array size 852 * Returns: 853 * Number of ID returned. All logical device IDs are put into pIds array. 854 * Note: A spare disk is not a logical device. 855 */ 856 int hpt_get_logical_devices(DEVICEID * pIds, int nMaxCount); 857 858 /*-------------------------------------------------------------------------- */ 859 860 /* hpt_get_device_info 861 * Version compatibility: v1.0.0.1 or later 862 * Parameters: 863 * id logical device id 864 * pInfo pointer to HPT_ARRAY_INFO structure 865 * Returns: 866 * 0 - Success 867 */ 868 int hpt_get_device_info(DEVICEID id, PLOGICAL_DEVICE_INFO pInfo); 869 870 #if HPT_INTERFACE_VERSION>=0x01010000 871 int hpt_get_device_info_v2(DEVICEID id, PLOGICAL_DEVICE_INFO_V2 pInfo); 872 #endif 873 874 /*-------------------------------------------------------------------------- */ 875 876 /* hpt_create_array 877 * Version compatibility: v1.0.0.1 or later 878 * Parameters: 879 * pParam pointer to CREATE_ARRAY_PARAMS structure 880 * Returns: 881 * 0 failed 882 * else return array id 883 */ 884 DEVICEID hpt_create_array(PCREATE_ARRAY_PARAMS pParam); 885 886 #if HPT_INTERFACE_VERSION>=0x01010000 887 DEVICEID hpt_create_array_v2(PCREATE_ARRAY_PARAMS_V2 pParam); 888 #endif 889 890 /*-------------------------------------------------------------------------- */ 891 892 /* hpt_delete_array 893 * Version compatibility: v1.0.0.1 or later 894 * Parameters: 895 * id array id 896 * Returns: 897 * 0 Success 898 */ 899 int hpt_delete_array(DEVICEID id, DWORD options); 900 901 /*-------------------------------------------------------------------------- */ 902 903 /* hpt_device_io 904 * Read/write data on array and physcal device. 905 * Version compatibility: v1.0.0.1 or later 906 * Parameters: 907 * id device id. If it's an array ID, IO will be performed on the array. 908 * If it's a physical device ID, IO will be performed on the device. 909 * cmd IO_COMMAND_READ or IO_COMMAND_WRITE 910 * buffer data buffer 911 * length data size 912 * Returns: 913 * 0 Success 914 */ 915 int hpt_device_io(DEVICEID id, int cmd, ULONG lba, DWORD nSector, LPVOID buffer); 916 917 #if HPT_INTERFACE_VERSION >= 0x01010000 918 int hpt_device_io_v2(DEVICEID id, int cmd, LBA64 lba, DWORD nSector, LPVOID buffer); 919 #endif 920 921 /* hpt_add_disk_to_array 922 * Used to dynamicly add a disk to an RAID1, RAID0/1, RAID1/0 or RAID5 array. 923 * Auto-rebuild will start. 924 * Version compatibility: v1.0.0.1 or later 925 * Parameters: 926 * idArray array id 927 * idDisk disk id 928 * Returns: 929 * 0 Success 930 */ 931 int hpt_add_disk_to_array(DEVICEID idArray, DEVICEID idDisk); 932 /*-------------------------------------------------------------------------- */ 933 934 /* hpt_add_spare_disk 935 * Version compatibility: v1.0.0.1 or later 936 * Add a disk to spare pool. 937 * Parameters: 938 * idDisk disk id 939 * Returns: 940 * 0 Success 941 */ 942 int hpt_add_spare_disk(DEVICEID idDisk); 943 /*-------------------------------------------------------------------------- */ 944 945 /* hpt_add_dedicated_spare 946 * Version compatibility: v1.0.0.3 or later 947 * Add a spare disk to an array 948 * Parameters: 949 * idDisk disk id 950 * idArray array id 951 * Returns: 952 * 0 Success 953 */ 954 int hpt_add_dedicated_spare(DEVICEID idDisk, DEVICEID idArray); 955 /*-------------------------------------------------------------------------- */ 956 957 /* hpt_remove_spare_disk 958 * remove a disk from spare pool. 959 * Version compatibility: v1.0.0.1 or later 960 * Parameters: 961 * idDisk disk id 962 * Returns: 963 * 0 Success 964 */ 965 int hpt_remove_spare_disk(DEVICEID idDisk); 966 /*-------------------------------------------------------------------------- */ 967 968 /* hpt_get_event 969 * Used to poll events from driver. 970 * Version compatibility: v1.0.0.1 or later 971 * Parameters: 972 * pEvent pointer to HPT_EVENT structure 973 * Returns: 974 * 0 Success, event info is filled in *pEvent 975 */ 976 int hpt_get_event(PHPT_EVENT pEvent); 977 /*-------------------------------------------------------------------------- */ 978 979 /* hpt_rebuild_data_block 980 * Used to copy data from source disk and mirror disk. 981 * Version compatibility: v1.0.0.1 or later 982 * Parameters: 983 * idArray Array ID (RAID1, 0/1 or RAID5) 984 * Lba Start LBA for each array member 985 * nSector Number of sectors for each array member (RAID 5 will ignore this parameter) 986 * 987 * Returns: 988 * 0 Success, event info is filled in *pEvent 989 */ 990 int hpt_rebuild_data_block(DEVICEID idMirror, DWORD Lba, UCHAR nSector); 991 #define hpt_rebuild_mirror(p1, p2, p3) hpt_rebuild_data_block(p1, p2, p3) 992 993 #if HPT_INTERFACE_VERSION >= 0x01010000 994 int hpt_rebuild_data_block_v2(DEVICEID idArray, LBA64 Lba, USHORT nSector); 995 #endif 996 /*-------------------------------------------------------------------------- */ 997 998 /* hpt_set_array_state 999 * set array state. 1000 * Version compatibility: v1.0.0.1 or later 1001 * Parameters: 1002 * idArray Array ID 1003 * state See above 'array states' constants, possible values are: 1004 * MIRROR_REBUILD_START 1005 * Indicate that GUI wants to rebuild a mirror array 1006 * MIRROR_REBUILD_ABORT 1007 * GUI wants to abort rebuilding an array 1008 * MIRROR_REBUILD_COMPLETE 1009 * GUI finished to rebuild an array. If rebuild is done by driver this 1010 * state has no use 1011 * 1012 * Returns: 1013 * 0 Success 1014 */ 1015 int hpt_set_array_state(DEVICEID idArray, DWORD state); 1016 /*-------------------------------------------------------------------------- */ 1017 1018 /* hpt_set_array_info 1019 * set array info. 1020 * Version compatibility: v1.0.0.1 or later 1021 * Parameters: 1022 * idArray Array ID 1023 * pInfo pointer to new info 1024 * 1025 * Returns: 1026 * 0 Success 1027 */ 1028 int hpt_set_array_info(DEVICEID idArray, PALTERABLE_ARRAY_INFO pInfo); 1029 /*-------------------------------------------------------------------------- */ 1030 1031 /* hpt_set_device_info 1032 * set device info. 1033 * Version compatibility: v1.0.0.1 or later 1034 * Parameters: 1035 * idDisk device ID 1036 * pInfo pointer to new info 1037 * 1038 * Returns: 1039 * 0 Success 1040 * Additional notes: 1041 * If idDisk==0, call to this function will stop buzzer on the adapter 1042 * (if supported by driver). 1043 */ 1044 int hpt_set_device_info(DEVICEID idDisk, PALTERABLE_DEVICE_INFO pInfo); 1045 1046 #if HPT_INTERFACE_VERSION >= 0x01000004 1047 int hpt_set_device_info_v2(DEVICEID idDisk, PALTERABLE_DEVICE_INFO_V2 pInfo); 1048 #endif 1049 1050 /*-------------------------------------------------------------------------- */ 1051 1052 /* hpt_rescan_devices 1053 * rescan devices 1054 * Version compatibility: v1.0.0.1 or later 1055 * Parameters: 1056 * None 1057 * Returns: 1058 * 0 Success 1059 */ 1060 int hpt_rescan_devices(); 1061 /*-------------------------------------------------------------------------- */ 1062 1063 /* hpt_get_601_info 1064 * Get HPT601 status 1065 * Version compatibiilty: v1.0.0.3 or later 1066 * Parameters: 1067 * idDisk - Disk handle 1068 * PHPT601_INFO - pointer to HPT601 info buffer 1069 * Returns: 1070 * 0 Success 1071 */ 1072 int hpt_get_601_info(DEVICEID idDisk, PHPT601_INFO pInfo); 1073 /*-------------------------------------------------------------------------- */ 1074 1075 /* hpt_set_601_info 1076 * HPT601 function control 1077 * Version compatibiilty: v1.0.0.3 or later 1078 * Parameters: 1079 * idDisk - Disk handle 1080 * PHPT601_INFO - pointer to HPT601 info buffer 1081 * Returns: 1082 * 0 Success 1083 */ 1084 int hpt_set_601_info(DEVICEID idDisk, PHPT601_INFO pInfo); 1085 /*-------------------------------------------------------------------------- */ 1086 1087 /* hpt_lock_device 1088 * Lock a block on a device (prevent OS accessing it) 1089 * Version compatibiilty: v1.0.0.3 or later 1090 * Parameters: 1091 * idDisk - Disk handle 1092 * Lba - Start LBA 1093 * nSectors - number of sectors 1094 * Returns: 1095 * 0 Success 1096 */ 1097 int hpt_lock_device(DEVICEID idDisk, ULONG Lba, UCHAR nSectors); 1098 1099 #if HPT_INTERFACE_VERSION >= 0x01010000 1100 int hpt_lock_device_v2(DEVICEID idDisk, LBA64 Lba, USHORT nSectors); 1101 #endif 1102 /*-------------------------------------------------------------------------- */ 1103 1104 /* hpt_lock_device 1105 * Unlock a device 1106 * Version compatibiilty: v1.0.0.3 or later 1107 * Parameters: 1108 * idDisk - Disk handle 1109 * Returns: 1110 * 0 Success 1111 */ 1112 int hpt_unlock_device(DEVICEID idDisk); 1113 /*-------------------------------------------------------------------------- */ 1114 1115 /* hpt_ide_pass_through 1116 * directly access controller's command and control registers. 1117 * Can only call it on physical devices. 1118 * Version compatibility: v1.0.0.3 or later 1119 * Parameters: 1120 * p - IDE_PASS_THROUGH header pointer 1121 * Returns: 1122 * 0 Success 1123 */ 1124 int hpt_ide_pass_through(PIDE_PASS_THROUGH_HEADER p); 1125 /*-------------------------------------------------------------------------- */ 1126 1127 /* hpt_verify_data_block 1128 * verify data block on RAID1 or RAID5. 1129 * Version compatibility: v1.0.0.3 or later 1130 * Parameters: 1131 * idArray - Array ID 1132 * Lba - block number (on each array member, not logical block!) 1133 * nSectors - Sectors for each member (RAID 5 will ignore this parameter) 1134 * Returns: 1135 * 0 Success 1136 * 1 Data compare error 1137 * 2 I/O error 1138 */ 1139 int hpt_verify_data_block(DEVICEID idArray, ULONG Lba, UCHAR nSectors); 1140 1141 #if HPT_INTERFACE_VERSION >= 0x01010000 1142 int hpt_verify_data_block_v2(DEVICEID idArray, LBA64 Lba, USHORT nSectors); 1143 #endif 1144 /*-------------------------------------------------------------------------- */ 1145 1146 /* hpt_initialize_data_block 1147 * initialize data block (fill with zero) on RAID5 1148 * Version compatibility: v1.0.0.3 or later 1149 * Parameters: 1150 * idArray - Array ID 1151 * Lba - block number (on each array member, not logical block!) 1152 * nSectors - Sectors for each member (RAID 5 will ignore this parameter) 1153 * Returns: 1154 * 0 Success 1155 */ 1156 int hpt_initialize_data_block(DEVICEID idArray, ULONG Lba, UCHAR nSectors); 1157 1158 #if HPT_INTERFACE_VERSION >= 0x01010000 1159 int hpt_initialize_data_block_v2(DEVICEID idArray, LBA64 Lba, USHORT nSectors); 1160 #endif 1161 /*-------------------------------------------------------------------------- */ 1162 1163 /* hpt_device_io_ex 1164 * extended device I/O function 1165 * Version compatibility: v1.0.0.3 or later 1166 * Parameters: 1167 * idArray - Array ID 1168 * Lba - block number (on each array member, not logical block!) 1169 * nSectors - Sectors for each member 1170 * buffer - I/O buffer or s/g address 1171 * Returns: 1172 * 0 Success 1173 */ 1174 int hpt_device_io_ex(PDEVICE_IO_EX_PARAMS param); 1175 #if HPT_INTERFACE_VERSION >= 0x01010000 1176 int hpt_device_io_ex_v2(void * param); /* NOT IMPLEMENTED */ 1177 #endif 1178 /*-------------------------------------------------------------------------- */ 1179 1180 /* hpt_set_boot_mark 1181 * select boot device 1182 * Version compatibility: v1.0.0.3 or later 1183 * Parameters: 1184 * id - logical device ID. If id is 0 the boot mark will be removed. 1185 * Returns: 1186 * 0 Success 1187 */ 1188 int hpt_set_boot_mark(DEVICEID id); 1189 /*-------------------------------------------------------------------------- */ 1190 1191 /* hpt_query_remove 1192 * check if device can be removed safely 1193 * Version compatibility: v1.0.0.4 or later 1194 * Parameters: 1195 * ndev - number of devices 1196 * pIds - device ID list 1197 * Returns: 1198 * 0 - Success 1199 * -1 - unknown error 1200 * n - the n-th device that can't be removed 1201 */ 1202 int hpt_query_remove(DWORD ndev, DEVICEID *pIds); 1203 /*-------------------------------------------------------------------------- */ 1204 1205 /* hpt_remove_devices 1206 * remove a list of devices 1207 * Version compatibility: v1.0.0.4 or later 1208 * Parameters: 1209 * ndev - number of devices 1210 * pIds - device ID list 1211 * Returns: 1212 * 0 - Success 1213 * -1 - unknown error 1214 * n - the n-th device that can't be removed 1215 */ 1216 int hpt_remove_devices(DWORD ndev, DEVICEID *pIds); 1217 /*-------------------------------------------------------------------------- */ 1218 1219 /* hpt_ide_pass_through 1220 * directly access controller's command and control registers. 1221 * Can only call it on physical devices. 1222 * Version compatibility: v1.0.0.3 or later 1223 * Parameters: 1224 * p - IDE_PASS_THROUGH header pointer 1225 * Returns: 1226 * 0 Success 1227 */ 1228 int hpt_ide_pass_through(PIDE_PASS_THROUGH_HEADER p); 1229 /*-------------------------------------------------------------------------- */ 1230 1231 #endif 1232 1233 #pragma pack() 1234 #endif 1235