1 /* 2 * Copyright (c) 2004-2005 HighPoint Technologies, Inc. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/kernel.h> 33 #include <sys/bus.h> 34 #include <sys/malloc.h> 35 #include <sys/resource.h> 36 #include <sys/time.h> 37 #include <sys/callout.h> 38 #include <sys/signalvar.h> 39 #include <sys/eventhandler.h> 40 #include <sys/proc.h> 41 #include <sys/kthread.h> 42 43 #if (__FreeBSD_version >= 500000) 44 #include <sys/mutex.h> 45 #include <sys/module.h> 46 #endif 47 48 #if (__FreeBSD_version >= 500000) 49 #include <dev/pci/pcireg.h> 50 #include <dev/pci/pcivar.h> 51 #else 52 #include <pci/pcireg.h> 53 #include <pci/pcivar.h> 54 #include <sys/wait.h> 55 #include <sys/sysproto.h> 56 #endif 57 58 #ifndef __KERNEL__ 59 #define __KERNEL__ 60 #endif 61 62 #include <dev/hptmv/global.h> 63 #include <dev/hptmv/hptintf.h> 64 #include <dev/hptmv/osbsd.h> 65 #include <dev/hptmv/access601.h> 66 67 68 #ifdef DEBUG 69 #ifdef DEBUG_LEVEL 70 int hpt_dbg_level = DEBUG_LEVEL; 71 #else 72 int hpt_dbg_level = 0; 73 #endif 74 #endif 75 76 #define MV_ERROR printf 77 78 /* 79 * CAM SIM entry points 80 */ 81 static int hpt_probe (device_t dev); 82 static void launch_worker_thread(void); 83 static int hpt_attach(device_t dev); 84 static int hpt_detach(device_t dev); 85 static int hpt_shutdown(device_t dev); 86 static void hpt_poll(struct cam_sim *sim); 87 static void hpt_intr(void *arg); 88 static void hpt_async(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg); 89 static void hpt_action(struct cam_sim *sim, union ccb *ccb); 90 91 static device_method_t driver_methods[] = { 92 /* Device interface */ 93 DEVMETHOD(device_probe, hpt_probe), 94 DEVMETHOD(device_attach, hpt_attach), 95 DEVMETHOD(device_detach, hpt_detach), 96 97 DEVMETHOD(device_shutdown, hpt_shutdown), 98 DEVMETHOD_END 99 }; 100 101 static driver_t hpt_pci_driver = { 102 __str(PROC_DIR_NAME), 103 driver_methods, 104 sizeof(IAL_ADAPTER_T) 105 }; 106 107 static devclass_t hpt_devclass; 108 109 #define __DRIVER_MODULE(p1, p2, p3, p4, p5, p6) DRIVER_MODULE(p1, p2, p3, p4, p5, p6) 110 __DRIVER_MODULE(PROC_DIR_NAME, pci, hpt_pci_driver, hpt_devclass, 0, 0); 111 MODULE_DEPEND(PROC_DIR_NAME, cam, 1, 1, 1); 112 113 #define ccb_ccb_ptr spriv_ptr0 114 #define ccb_adapter ccb_h.spriv_ptr1 115 116 static void SetInquiryData(PINQUIRYDATA inquiryData, PVDevice pVDev); 117 static void HPTLIBAPI OsSendCommand (_VBUS_ARG union ccb * ccb); 118 static void HPTLIBAPI fOsCommandDone(_VBUS_ARG PCommand pCmd); 119 static void ccb_done(union ccb *ccb); 120 static void hpt_queue_ccb(union ccb **ccb_Q, union ccb *ccb); 121 static void hpt_free_ccb(union ccb **ccb_Q, union ccb *ccb); 122 static void hptmv_free_edma_queues(IAL_ADAPTER_T *pAdapter); 123 static void hptmv_free_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum); 124 static void handleEdmaError(_VBUS_ARG PCommand pCmd); 125 static int hptmv_init_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum); 126 static int fResetActiveCommands(PVBus _vbus_p); 127 static void fRegisterVdevice(IAL_ADAPTER_T *pAdapter); 128 static int hptmv_allocate_edma_queues(IAL_ADAPTER_T *pAdapter); 129 static void hptmv_handle_event_disconnect(void *data); 130 static void hptmv_handle_event_connect(void *data); 131 static int start_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum); 132 static void init_vdev_params(IAL_ADAPTER_T *pAdapter, MV_U8 channel); 133 static int hptmv_parse_identify_results(MV_SATA_CHANNEL *pMvSataChannel); 134 static int HPTLIBAPI fOsBuildSgl(_VBUS_ARG PCommand pCmd, FPSCAT_GATH pSg, 135 int logical); 136 static MV_BOOLEAN CommandCompletionCB(MV_SATA_ADAPTER *pMvSataAdapter, 137 MV_U8 channelNum, MV_COMPLETION_TYPE comp_type, MV_VOID_PTR commandId, 138 MV_U16 responseFlags, MV_U32 timeStamp, 139 MV_STORAGE_DEVICE_REGISTERS *registerStruct); 140 static MV_BOOLEAN hptmv_event_notify(MV_SATA_ADAPTER *pMvSataAdapter, 141 MV_EVENT_TYPE eventType, MV_U32 param1, MV_U32 param2); 142 143 #define ccb_ccb_ptr spriv_ptr0 144 #define ccb_adapter ccb_h.spriv_ptr1 145 146 IAL_ADAPTER_T *gIal_Adapter = 0; 147 IAL_ADAPTER_T *pCurAdapter = 0; 148 static MV_SATA_CHANNEL gMvSataChannels[MAX_VBUS][MV_SATA_CHANNELS_NUM]; 149 150 typedef struct st_HPT_DPC { 151 IAL_ADAPTER_T *pAdapter; 152 void (*dpc)(IAL_ADAPTER_T *, void *, UCHAR); 153 void *arg; 154 UCHAR flags; 155 } ST_HPT_DPC; 156 157 #define MAX_DPC 16 158 UCHAR DPC_Request_Nums = 0; 159 static ST_HPT_DPC DpcQueue[MAX_DPC]; 160 static int DpcQueue_First=0; 161 static int DpcQueue_Last = 0; 162 163 char DRIVER_VERSION[] = "v1.16"; 164 165 #if (__FreeBSD_version >= 500000) 166 static struct mtx driver_lock; 167 intrmask_t lock_driver() 168 { 169 170 intrmask_t spl = 0; 171 mtx_lock(&driver_lock); 172 return spl; 173 } 174 void unlock_driver(intrmask_t spl) 175 { 176 mtx_unlock(&driver_lock); 177 } 178 #else 179 static int driver_locked = 0; 180 intrmask_t lock_driver() 181 { 182 intrmask_t spl = splcam(); 183 loop: 184 while (driver_locked) 185 tsleep(&driver_locked, PRIBIO, "hptlck", hz); 186 atomic_add_int(&driver_locked, 1); 187 if (driver_locked>1) { 188 atomic_subtract_int(&driver_locked, 1); 189 goto loop; 190 } 191 return spl; 192 } 193 194 void unlock_driver(intrmask_t spl) 195 { 196 atomic_subtract_int(&driver_locked, 1); 197 if (driver_locked==0) { 198 wakeup(&driver_locked); 199 } 200 splx(spl); 201 } 202 #endif 203 204 /******************************************************************************* 205 * Name: hptmv_free_channel 206 * 207 * Description: free allocated queues for the given channel 208 * 209 * Parameters: pMvSataAdapter - pointer to the RR18xx controler this 210 * channel connected to. 211 * channelNum - channel number. 212 * 213 ******************************************************************************/ 214 static void 215 hptmv_free_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum) 216 { 217 HPT_ASSERT(channelNum < MV_SATA_CHANNELS_NUM); 218 pAdapter->mvSataAdapter.sataChannel[channelNum] = NULL; 219 } 220 221 static void failDevice(PVDevice pVDev) 222 { 223 PVBus _vbus_p = pVDev->pVBus; 224 IAL_ADAPTER_T *pAdapter = (IAL_ADAPTER_T *)_vbus_p->OsExt; 225 226 pVDev->u.disk.df_on_line = 0; 227 pVDev->vf_online = 0; 228 if (pVDev->pfnDeviceFailed) 229 CallWhenIdle(_VBUS_P (DPC_PROC)pVDev->pfnDeviceFailed, pVDev); 230 231 fNotifyGUI(ET_DEVICE_REMOVED, pVDev); 232 233 #ifndef FOR_DEMO 234 if (pAdapter->ver_601==2 && !pAdapter->beeping) { 235 pAdapter->beeping = 1; 236 BeepOn(pAdapter->mvSataAdapter.adapterIoBaseAddress); 237 set_fail_led(&pAdapter->mvSataAdapter, pVDev->u.disk.mv->channelNumber, 1); 238 } 239 #endif 240 } 241 242 int MvSataResetChannel(MV_SATA_ADAPTER *pMvSataAdapter, MV_U8 channel); 243 244 static void 245 handleEdmaError(_VBUS_ARG PCommand pCmd) 246 { 247 PDevice pDevice = &pCmd->pVDevice->u.disk; 248 MV_SATA_ADAPTER * pSataAdapter = pDevice->mv->mvSataAdapter; 249 250 if (!pDevice->df_on_line) { 251 KdPrint(("Device is offline")); 252 pCmd->Result = RETURN_BAD_DEVICE; 253 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 254 return; 255 } 256 257 if (pCmd->RetryCount++>5) { 258 hpt_printk(("too many retries on channel(%d)\n", pDevice->mv->channelNumber)); 259 failed: 260 failDevice(pCmd->pVDevice); 261 pCmd->Result = RETURN_IDE_ERROR; 262 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 263 return; 264 } 265 266 /* reset the channel and retry the command */ 267 if (MvSataResetChannel(pSataAdapter, pDevice->mv->channelNumber)) 268 goto failed; 269 270 fNotifyGUI(ET_DEVICE_ERROR, Map2pVDevice(pDevice)); 271 272 hpt_printk(("Retry on channel(%d)\n", pDevice->mv->channelNumber)); 273 fDeviceSendCommand(_VBUS_P pCmd); 274 } 275 276 /**************************************************************** 277 * Name: hptmv_init_channel 278 * 279 * Description: allocate request and response queues for the EDMA of the 280 * given channel and sets other fields. 281 * 282 * Parameters: 283 * pAdapter - pointer to the emulated adapter data structure 284 * channelNum - channel number. 285 * Return: 0 on success, otherwise on failure 286 ****************************************************************/ 287 static int 288 hptmv_init_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum) 289 { 290 MV_SATA_CHANNEL *pMvSataChannel; 291 dma_addr_t req_dma_addr; 292 dma_addr_t rsp_dma_addr; 293 294 if (channelNum >= MV_SATA_CHANNELS_NUM) 295 { 296 MV_ERROR("RR18xx[%d]: Bad channelNum=%d", 297 pAdapter->mvSataAdapter.adapterId, channelNum); 298 return -1; 299 } 300 301 pMvSataChannel = &gMvSataChannels[pAdapter->mvSataAdapter.adapterId][channelNum]; 302 pAdapter->mvSataAdapter.sataChannel[channelNum] = pMvSataChannel; 303 pMvSataChannel->channelNumber = channelNum; 304 pMvSataChannel->lba48Address = MV_FALSE; 305 pMvSataChannel->maxReadTransfer = MV_FALSE; 306 307 pMvSataChannel->requestQueue = (struct mvDmaRequestQueueEntry *) 308 (pAdapter->requestsArrayBaseAlignedAddr + (channelNum * MV_EDMA_REQUEST_QUEUE_SIZE)); 309 req_dma_addr = pAdapter->requestsArrayBaseDmaAlignedAddr + (channelNum * MV_EDMA_REQUEST_QUEUE_SIZE); 310 311 312 KdPrint(("requestQueue addr is 0x%llX", (HPT_U64)(ULONG_PTR)req_dma_addr)); 313 314 /* check the 1K alignment of the request queue*/ 315 if (req_dma_addr & 0x3ff) 316 { 317 MV_ERROR("RR18xx[%d]: request queue allocated isn't 1 K aligned," 318 " dma_addr=%llx channel=%d\n", pAdapter->mvSataAdapter.adapterId, 319 (HPT_U64)(ULONG_PTR)req_dma_addr, channelNum); 320 return -1; 321 } 322 pMvSataChannel->requestQueuePciLowAddress = req_dma_addr; 323 pMvSataChannel->requestQueuePciHiAddress = 0; 324 KdPrint(("RR18xx[%d,%d]: request queue allocated: 0x%p", 325 pAdapter->mvSataAdapter.adapterId, channelNum, 326 pMvSataChannel->requestQueue)); 327 pMvSataChannel->responseQueue = (struct mvDmaResponseQueueEntry *) 328 (pAdapter->responsesArrayBaseAlignedAddr + (channelNum * MV_EDMA_RESPONSE_QUEUE_SIZE)); 329 rsp_dma_addr = pAdapter->responsesArrayBaseDmaAlignedAddr + (channelNum * MV_EDMA_RESPONSE_QUEUE_SIZE); 330 331 /* check the 256 alignment of the response queue*/ 332 if (rsp_dma_addr & 0xff) 333 { 334 MV_ERROR("RR18xx[%d,%d]: response queue allocated isn't 256 byte " 335 "aligned, dma_addr=%llx\n", 336 pAdapter->mvSataAdapter.adapterId, channelNum, (HPT_U64)(ULONG_PTR)rsp_dma_addr); 337 return -1; 338 } 339 pMvSataChannel->responseQueuePciLowAddress = rsp_dma_addr; 340 pMvSataChannel->responseQueuePciHiAddress = 0; 341 KdPrint(("RR18xx[%d,%d]: response queue allocated: 0x%p", 342 pAdapter->mvSataAdapter.adapterId, channelNum, 343 pMvSataChannel->responseQueue)); 344 345 pAdapter->mvChannel[channelNum].online = MV_TRUE; 346 return 0; 347 } 348 349 /****************************************************************************** 350 * Name: hptmv_parse_identify_results 351 * 352 * Description: this functions parses the identify command results, checks 353 * that the connected deives can be accesed by RR18xx EDMA, 354 * and updates the channel stucture accordingly. 355 * 356 * Parameters: pMvSataChannel, pointer to the channel data structure. 357 * 358 * Returns: =0 ->success, < 0 ->failure. 359 * 360 ******************************************************************************/ 361 static int 362 hptmv_parse_identify_results(MV_SATA_CHANNEL *pMvSataChannel) 363 { 364 MV_U16 *iden = pMvSataChannel->identifyDevice; 365 366 /*LBA addressing*/ 367 if (! (iden[IDEN_CAPACITY_1_OFFSET] & 0x200)) 368 { 369 KdPrint(("IAL Error in IDENTIFY info: LBA not supported\n")); 370 return -1; 371 } 372 else 373 { 374 KdPrint(("%25s - %s\n", "Capabilities", "LBA supported")); 375 } 376 /*DMA support*/ 377 if (! (iden[IDEN_CAPACITY_1_OFFSET] & 0x100)) 378 { 379 KdPrint(("IAL Error in IDENTIFY info: DMA not supported\n")); 380 return -1; 381 } 382 else 383 { 384 KdPrint(("%25s - %s\n", "Capabilities", "DMA supported")); 385 } 386 /* PIO */ 387 if ((iden[IDEN_VALID] & 2) == 0) 388 { 389 KdPrint(("IAL Error in IDENTIFY info: not able to find PIO mode\n")); 390 return -1; 391 } 392 KdPrint(("%25s - 0x%02x\n", "PIO modes supported", 393 iden[IDEN_PIO_MODE_SPPORTED] & 0xff)); 394 395 /*UDMA*/ 396 if ((iden[IDEN_VALID] & 4) == 0) 397 { 398 KdPrint(("IAL Error in IDENTIFY info: not able to find UDMA mode\n")); 399 return -1; 400 } 401 402 /* 48 bit address */ 403 if ((iden[IDEN_SUPPORTED_COMMANDS2] & 0x400)) 404 { 405 KdPrint(("%25s - %s\n", "LBA48 addressing", "supported")); 406 pMvSataChannel->lba48Address = MV_TRUE; 407 } 408 else 409 { 410 KdPrint(("%25s - %s\n", "LBA48 addressing", "Not supported")); 411 pMvSataChannel->lba48Address = MV_FALSE; 412 } 413 return 0; 414 } 415 416 static void 417 init_vdev_params(IAL_ADAPTER_T *pAdapter, MV_U8 channel) 418 { 419 PVDevice pVDev = &pAdapter->VDevices[channel]; 420 MV_SATA_CHANNEL *pMvSataChannel = pAdapter->mvSataAdapter.sataChannel[channel]; 421 MV_U16_PTR IdentifyData = pMvSataChannel->identifyDevice; 422 423 pMvSataChannel->outstandingCommands = 0; 424 425 pVDev->u.disk.mv = pMvSataChannel; 426 pVDev->u.disk.df_on_line = 1; 427 pVDev->u.disk.pVBus = &pAdapter->VBus; 428 pVDev->pVBus = &pAdapter->VBus; 429 430 #ifdef SUPPORT_48BIT_LBA 431 if (pMvSataChannel->lba48Address == MV_TRUE) 432 pVDev->u.disk.dDeRealCapacity = ((IdentifyData[101]<<16) | IdentifyData[100]) - 1; 433 else 434 #endif 435 if(IdentifyData[53] & 1) { 436 pVDev->u.disk.dDeRealCapacity = 437 (((IdentifyData[58]<<16 | IdentifyData[57]) < (IdentifyData[61]<<16 | IdentifyData[60])) ? 438 (IdentifyData[61]<<16 | IdentifyData[60]) : 439 (IdentifyData[58]<<16 | IdentifyData[57])) - 1; 440 } else 441 pVDev->u.disk.dDeRealCapacity = 442 (IdentifyData[61]<<16 | IdentifyData[60]) - 1; 443 444 pVDev->u.disk.bDeUsable_Mode = pVDev->u.disk.bDeModeSetting = 445 pAdapter->mvChannel[channel].maxPioModeSupported - MV_ATA_TRANSFER_PIO_0; 446 447 if (pAdapter->mvChannel[channel].maxUltraDmaModeSupported!=0xFF) { 448 pVDev->u.disk.bDeUsable_Mode = pVDev->u.disk.bDeModeSetting = 449 pAdapter->mvChannel[channel].maxUltraDmaModeSupported - MV_ATA_TRANSFER_UDMA_0 + 8; 450 } 451 } 452 453 static void device_change(IAL_ADAPTER_T *pAdapter , MV_U8 channelIndex, int plugged) 454 { 455 PVDevice pVDev; 456 MV_SATA_ADAPTER *pMvSataAdapter = &pAdapter->mvSataAdapter; 457 MV_SATA_CHANNEL *pMvSataChannel = pMvSataAdapter->sataChannel[channelIndex]; 458 459 if (!pMvSataChannel) return; 460 461 if (plugged) 462 { 463 pVDev = &(pAdapter->VDevices[channelIndex]); 464 init_vdev_params(pAdapter, channelIndex); 465 466 pVDev->VDeviceType = pVDev->u.disk.df_atapi? VD_ATAPI : 467 pVDev->u.disk.df_removable_drive? VD_REMOVABLE : VD_SINGLE_DISK; 468 469 pVDev->VDeviceCapacity = pVDev->u.disk.dDeRealCapacity-SAVE_FOR_RAID_INFO; 470 pVDev->pfnSendCommand = pfnSendCommand[pVDev->VDeviceType]; 471 pVDev->pfnDeviceFailed = pfnDeviceFailed[pVDev->VDeviceType]; 472 pVDev->vf_online = 1; 473 474 #ifdef SUPPORT_ARRAY 475 if(pVDev->pParent) 476 { 477 int iMember; 478 for(iMember = 0; iMember < pVDev->pParent->u.array.bArnMember; iMember++) 479 if((PVDevice)pVDev->pParent->u.array.pMember[iMember] == pVDev) 480 pVDev->pParent->u.array.pMember[iMember] = NULL; 481 pVDev->pParent = NULL; 482 } 483 #endif 484 fNotifyGUI(ET_DEVICE_PLUGGED,pVDev); 485 fCheckBootable(pVDev); 486 RegisterVDevice(pVDev); 487 488 #ifndef FOR_DEMO 489 if (pAdapter->beeping) { 490 pAdapter->beeping = 0; 491 BeepOff(pAdapter->mvSataAdapter.adapterIoBaseAddress); 492 } 493 #endif 494 495 } 496 else 497 { 498 pVDev = &(pAdapter->VDevices[channelIndex]); 499 failDevice(pVDev); 500 } 501 } 502 503 static int 504 start_channel(IAL_ADAPTER_T *pAdapter, MV_U8 channelNum) 505 { 506 MV_SATA_ADAPTER *pMvSataAdapter = &pAdapter->mvSataAdapter; 507 MV_SATA_CHANNEL *pMvSataChannel = pMvSataAdapter->sataChannel[channelNum]; 508 MV_CHANNEL *pChannelInfo = &(pAdapter->mvChannel[channelNum]); 509 MV_U32 udmaMode,pioMode; 510 511 KdPrint(("RR18xx [%d]: start channel (%d)", pMvSataAdapter->adapterId, 512 channelNum)); 513 514 515 /* Software reset channel */ 516 if (mvStorageDevATASoftResetDevice(pMvSataAdapter, channelNum) == MV_FALSE) 517 { 518 MV_ERROR("RR18xx [%d,%d]: failed to perform Software reset\n", 519 pMvSataAdapter->adapterId, channelNum); 520 return -1; 521 } 522 523 /* Hardware reset channel */ 524 if (mvSataChannelHardReset(pMvSataAdapter, channelNum) == MV_FALSE) 525 { 526 /* If failed, try again - this is when trying to hardreset a channel */ 527 /* when drive is just spinning up */ 528 StallExec(5000000); /* wait 5 sec before trying again */ 529 if (mvSataChannelHardReset(pMvSataAdapter, channelNum) == MV_FALSE) 530 { 531 MV_ERROR("RR18xx [%d,%d]: failed to perform Hard reset\n", 532 pMvSataAdapter->adapterId, channelNum); 533 return -1; 534 } 535 } 536 537 /* identify device*/ 538 if (mvStorageDevATAIdentifyDevice(pMvSataAdapter, channelNum) == MV_FALSE) 539 { 540 MV_ERROR("RR18xx [%d,%d]: failed to perform ATA Identify command\n" 541 , pMvSataAdapter->adapterId, channelNum); 542 return -1; 543 } 544 if (hptmv_parse_identify_results(pMvSataChannel)) 545 { 546 MV_ERROR("RR18xx [%d,%d]: Error in parsing ATA Identify message\n" 547 , pMvSataAdapter->adapterId, channelNum); 548 return -1; 549 } 550 551 /* mvStorageDevATASetFeatures */ 552 /* Disable 8 bit PIO in case CFA enabled */ 553 if (pMvSataChannel->identifyDevice[86] & 4) 554 { 555 KdPrint(("RR18xx [%d]: Disable 8 bit PIO (CFA enabled) \n", 556 pMvSataAdapter->adapterId)); 557 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 558 MV_ATA_SET_FEATURES_DISABLE_8_BIT_PIO, 0, 559 0, 0, 0) == MV_FALSE) 560 { 561 MV_ERROR("RR18xx [%d]: channel %d: mvStorageDevATASetFeatures" 562 " failed\n", pMvSataAdapter->adapterId, channelNum); 563 return -1; 564 } 565 } 566 /* Write cache */ 567 #ifdef ENABLE_WRITE_CACHE 568 if (pMvSataChannel->identifyDevice[82] & 0x20) 569 { 570 if (!(pMvSataChannel->identifyDevice[85] & 0x20)) /* if not enabled by default */ 571 { 572 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 573 MV_ATA_SET_FEATURES_ENABLE_WCACHE, 0, 574 0, 0, 0) == MV_FALSE) 575 { 576 MV_ERROR("RR18xx [%d]: channel %d: mvStorageDevATASetFeatures failed\n", 577 pMvSataAdapter->adapterId, channelNum); 578 return -1; 579 } 580 } 581 KdPrint(("RR18xx [%d]: channel %d, write cache enabled\n", 582 pMvSataAdapter->adapterId, channelNum)); 583 } 584 else 585 { 586 KdPrint(("RR18xx [%d]: channel %d, write cache not supported\n", 587 pMvSataAdapter->adapterId, channelNum)); 588 } 589 #else /* disable write cache */ 590 { 591 if (pMvSataChannel->identifyDevice[85] & 0x20) 592 { 593 KdPrint(("RR18xx [%d]: channel =%d, disable write cache\n", 594 pMvSataAdapter->adapterId, channelNum)); 595 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 596 MV_ATA_SET_FEATURES_DISABLE_WCACHE, 0, 597 0, 0, 0) == MV_FALSE) 598 { 599 MV_ERROR("RR18xx [%d]: channel %d: mvStorageDevATASetFeatures failed\n", 600 pMvSataAdapter->adapterId, channelNum); 601 return -1; 602 } 603 } 604 KdPrint(("RR18xx [%d]: channel=%d, write cache disabled\n", 605 pMvSataAdapter->adapterId, channelNum)); 606 } 607 #endif 608 609 /* Set transfer mode */ 610 KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_SLOW\n", 611 pMvSataAdapter->adapterId)); 612 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 613 MV_ATA_SET_FEATURES_TRANSFER, 614 MV_ATA_TRANSFER_PIO_SLOW, 0, 0, 0) == 615 MV_FALSE) 616 { 617 MV_ERROR("RR18xx [%d] channel %d: Set Features failed\n", 618 pMvSataAdapter->adapterId, channelNum); 619 return -1; 620 } 621 622 if (pMvSataChannel->identifyDevice[IDEN_PIO_MODE_SPPORTED] & 1) 623 { 624 pioMode = MV_ATA_TRANSFER_PIO_4; 625 } 626 else if (pMvSataChannel->identifyDevice[IDEN_PIO_MODE_SPPORTED] & 2) 627 { 628 pioMode = MV_ATA_TRANSFER_PIO_3; 629 } 630 else 631 { 632 MV_ERROR("IAL Error in IDENTIFY info: PIO modes 3 and 4 not supported\n"); 633 pioMode = MV_ATA_TRANSFER_PIO_SLOW; 634 } 635 636 KdPrint(("RR18xx [%d] Set transfer mode XFER_PIO_4\n", 637 pMvSataAdapter->adapterId)); 638 pAdapter->mvChannel[channelNum].maxPioModeSupported = pioMode; 639 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 640 MV_ATA_SET_FEATURES_TRANSFER, 641 pioMode, 0, 0, 0) == MV_FALSE) 642 { 643 MV_ERROR("RR18xx [%d] channel %d: Set Features failed\n", 644 pMvSataAdapter->adapterId, channelNum); 645 return -1; 646 } 647 648 udmaMode = MV_ATA_TRANSFER_UDMA_0; 649 if (pMvSataChannel->identifyDevice[IDEN_UDMA_MODE] & 0x40) 650 { 651 udmaMode = MV_ATA_TRANSFER_UDMA_6; 652 } 653 else if (pMvSataChannel->identifyDevice[IDEN_UDMA_MODE] & 0x20) 654 { 655 udmaMode = MV_ATA_TRANSFER_UDMA_5; 656 } 657 else if (pMvSataChannel->identifyDevice[IDEN_UDMA_MODE] & 0x10) 658 { 659 udmaMode = MV_ATA_TRANSFER_UDMA_4; 660 } 661 else if (pMvSataChannel->identifyDevice[IDEN_UDMA_MODE] & 8) 662 { 663 udmaMode = MV_ATA_TRANSFER_UDMA_3; 664 } 665 else if (pMvSataChannel->identifyDevice[IDEN_UDMA_MODE] & 4) 666 { 667 udmaMode = MV_ATA_TRANSFER_UDMA_2; 668 } 669 670 KdPrint(("RR18xx [%d] Set transfer mode XFER_UDMA_%d\n", 671 pMvSataAdapter->adapterId, udmaMode & 0xf)); 672 pChannelInfo->maxUltraDmaModeSupported = udmaMode; 673 674 /*if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 675 MV_ATA_SET_FEATURES_TRANSFER, udmaMode, 676 0, 0, 0) == MV_FALSE) 677 { 678 MV_ERROR("RR18xx [%d] channel %d: Set Features failed\n", 679 pMvSataAdapter->adapterId, channelNum); 680 return -1; 681 }*/ 682 if (pChannelInfo->maxUltraDmaModeSupported == 0xFF) 683 return TRUE; 684 else 685 do 686 { 687 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 688 MV_ATA_SET_FEATURES_TRANSFER, 689 pChannelInfo->maxUltraDmaModeSupported, 690 0, 0, 0) == MV_FALSE) 691 { 692 if (pChannelInfo->maxUltraDmaModeSupported > MV_ATA_TRANSFER_UDMA_0) 693 { 694 if (mvStorageDevATASoftResetDevice(pMvSataAdapter, channelNum) == MV_FALSE) 695 { 696 MV_REG_WRITE_BYTE(pMvSataAdapter->adapterIoBaseAddress, 697 pMvSataChannel->eDmaRegsOffset + 698 0x11c, /* command reg */ 699 MV_ATA_COMMAND_IDLE_IMMEDIATE); 700 mvMicroSecondsDelay(10000); 701 mvSataChannelHardReset(pMvSataAdapter, channelNum); 702 if (mvStorageDevATASoftResetDevice(pMvSataAdapter, channelNum) == MV_FALSE) 703 return FALSE; 704 } 705 if (mvSataChannelHardReset(pMvSataAdapter, channelNum) == MV_FALSE) 706 return FALSE; 707 pChannelInfo->maxUltraDmaModeSupported--; 708 continue; 709 } 710 else return FALSE; 711 } 712 break; 713 }while (1); 714 715 /* Read look ahead */ 716 #ifdef ENABLE_READ_AHEAD 717 if (pMvSataChannel->identifyDevice[82] & 0x40) 718 { 719 if (!(pMvSataChannel->identifyDevice[85] & 0x40)) /* if not enabled by default */ 720 { 721 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 722 MV_ATA_SET_FEATURES_ENABLE_RLA, 0, 0, 723 0, 0) == MV_FALSE) 724 { 725 MV_ERROR("RR18xx [%d] channel %d: Set Features failed\n", 726 pMvSataAdapter->adapterId, channelNum); 727 return -1; 728 } 729 } 730 KdPrint(("RR18xx [%d]: channel=%d, read look ahead enabled\n", 731 pMvSataAdapter->adapterId, channelNum)); 732 } 733 else 734 { 735 KdPrint(("RR18xx [%d]: channel %d, Read Look Ahead not supported\n", 736 pMvSataAdapter->adapterId, channelNum)); 737 } 738 #else 739 { 740 if (pMvSataChannel->identifyDevice[86] & 0x20) 741 { 742 KdPrint(("RR18xx [%d]:channel %d, disable read look ahead\n", 743 pMvSataAdapter->adapterId, channelNum)); 744 if (mvStorageDevATASetFeatures(pMvSataAdapter, channelNum, 745 MV_ATA_SET_FEATURES_DISABLE_RLA, 0, 0, 746 0, 0) == MV_FALSE) 747 { 748 MV_ERROR("RR18xx [%d]:channel %d: ATA Set Features failed\n", 749 pMvSataAdapter->adapterId, channelNum); 750 return -1; 751 } 752 } 753 KdPrint(("RR18xx [%d]:channel %d, read look ahead disabled\n", 754 pMvSataAdapter->adapterId, channelNum)); 755 } 756 #endif 757 758 759 { 760 KdPrint(("RR18xx [%d]: channel %d config EDMA, Non Queued Mode\n", 761 pMvSataAdapter->adapterId, 762 channelNum)); 763 if (mvSataConfigEdmaMode(pMvSataAdapter, channelNum, 764 MV_EDMA_MODE_NOT_QUEUED, 0) == MV_FALSE) 765 { 766 MV_ERROR("RR18xx [%d] channel %d Error: mvSataConfigEdmaMode failed\n", 767 pMvSataAdapter->adapterId, channelNum); 768 return -1; 769 } 770 } 771 /* Enable EDMA */ 772 if (mvSataEnableChannelDma(pMvSataAdapter, channelNum) == MV_FALSE) 773 { 774 MV_ERROR("RR18xx [%d] Failed to enable DMA, channel=%d\n", 775 pMvSataAdapter->adapterId, channelNum); 776 return -1; 777 } 778 MV_ERROR("RR18xx [%d,%d]: channel started successfully\n", 779 pMvSataAdapter->adapterId, channelNum); 780 781 #ifndef FOR_DEMO 782 set_fail_led(pMvSataAdapter, channelNum, 0); 783 #endif 784 return 0; 785 } 786 787 static void 788 hptmv_handle_event(void * data, int flag) 789 { 790 IAL_ADAPTER_T *pAdapter = (IAL_ADAPTER_T *)data; 791 MV_SATA_ADAPTER *pMvSataAdapter = &pAdapter->mvSataAdapter; 792 MV_U8 channelIndex; 793 794 /* mvOsSemTake(&pMvSataAdapter->semaphore); */ 795 for (channelIndex = 0; channelIndex < MV_SATA_CHANNELS_NUM; channelIndex++) 796 { 797 switch(pAdapter->sataEvents[channelIndex]) 798 { 799 case SATA_EVENT_CHANNEL_CONNECTED: 800 /* Handle only connects */ 801 if (flag == 1) 802 break; 803 KdPrint(("RR18xx [%d,%d]: new device connected\n", 804 pMvSataAdapter->adapterId, channelIndex)); 805 hptmv_init_channel(pAdapter, channelIndex); 806 if (mvSataConfigureChannel( pMvSataAdapter, channelIndex) == MV_FALSE) 807 { 808 MV_ERROR("RR18xx [%d,%d] Failed to configure\n", 809 pMvSataAdapter->adapterId, channelIndex); 810 hptmv_free_channel(pAdapter, channelIndex); 811 } 812 else 813 { 814 /*mvSataChannelHardReset(pMvSataAdapter, channel);*/ 815 if (start_channel( pAdapter, channelIndex)) 816 { 817 MV_ERROR("RR18xx [%d,%d]Failed to start channel\n", 818 pMvSataAdapter->adapterId, channelIndex); 819 hptmv_free_channel(pAdapter, channelIndex); 820 } 821 else 822 { 823 device_change(pAdapter, channelIndex, TRUE); 824 } 825 } 826 pAdapter->sataEvents[channelIndex] = SATA_EVENT_NO_CHANGE; 827 break; 828 829 case SATA_EVENT_CHANNEL_DISCONNECTED: 830 /* Handle only disconnects */ 831 if (flag == 0) 832 break; 833 KdPrint(("RR18xx [%d,%d]: device disconnected\n", 834 pMvSataAdapter->adapterId, channelIndex)); 835 /* Flush pending commands */ 836 if(pMvSataAdapter->sataChannel[channelIndex]) 837 { 838 _VBUS_INST(&pAdapter->VBus) 839 mvSataFlushDmaQueue (pMvSataAdapter, channelIndex, 840 MV_FLUSH_TYPE_CALLBACK); 841 CheckPendingCall(_VBUS_P0); 842 mvSataRemoveChannel(pMvSataAdapter,channelIndex); 843 hptmv_free_channel(pAdapter, channelIndex); 844 pMvSataAdapter->sataChannel[channelIndex] = NULL; 845 KdPrint(("RR18xx [%d,%d]: channel removed\n", 846 pMvSataAdapter->adapterId, channelIndex)); 847 if (pAdapter->outstandingCommands==0 && DPC_Request_Nums==0) 848 Check_Idle_Call(pAdapter); 849 } 850 else 851 { 852 KdPrint(("RR18xx [%d,%d]: channel already removed!!\n", 853 pMvSataAdapter->adapterId, channelIndex)); 854 } 855 pAdapter->sataEvents[channelIndex] = SATA_EVENT_NO_CHANGE; 856 break; 857 858 case SATA_EVENT_NO_CHANGE: 859 break; 860 861 default: 862 break; 863 } 864 } 865 /* mvOsSemRelease(&pMvSataAdapter->semaphore); */ 866 } 867 868 #define EVENT_CONNECT 1 869 #define EVENT_DISCONNECT 0 870 871 static void 872 hptmv_handle_event_connect(void *data) 873 { 874 hptmv_handle_event (data, 0); 875 } 876 877 static void 878 hptmv_handle_event_disconnect(void *data) 879 { 880 hptmv_handle_event (data, 1); 881 } 882 883 static MV_BOOLEAN 884 hptmv_event_notify(MV_SATA_ADAPTER *pMvSataAdapter, MV_EVENT_TYPE eventType, 885 MV_U32 param1, MV_U32 param2) 886 { 887 IAL_ADAPTER_T *pAdapter = pMvSataAdapter->IALData; 888 889 switch (eventType) 890 { 891 case MV_EVENT_TYPE_SATA_CABLE: 892 { 893 MV_U8 channel = param2; 894 895 if (param1 == EVENT_CONNECT) 896 { 897 pAdapter->sataEvents[channel] = SATA_EVENT_CHANNEL_CONNECTED; 898 KdPrint(("RR18xx [%d,%d]: device connected event received\n", 899 pMvSataAdapter->adapterId, channel)); 900 /* Delete previous timers (if multiple drives connected in the same time */ 901 pAdapter->event_timer_connect = timeout(hptmv_handle_event_connect, pAdapter, 10*hz); 902 } 903 else if (param1 == EVENT_DISCONNECT) 904 { 905 pAdapter->sataEvents[channel] = SATA_EVENT_CHANNEL_DISCONNECTED; 906 KdPrint(("RR18xx [%d,%d]: device disconnected event received \n", 907 pMvSataAdapter->adapterId, channel)); 908 device_change(pAdapter, channel, FALSE); 909 /* Delete previous timers (if multiple drives disconnected in the same time */ 910 /*pAdapter->event_timer_disconnect = timeout(hptmv_handle_event_disconnect, pAdapter, 10*hz); */ 911 /*It is not necessary to wait, handle it directly*/ 912 hptmv_handle_event_disconnect(pAdapter); 913 } 914 else 915 { 916 917 MV_ERROR("RR18xx: illigal value for param1(%d) at " 918 "connect/disconect event, host=%d\n", param1, 919 pMvSataAdapter->adapterId ); 920 921 } 922 } 923 break; 924 case MV_EVENT_TYPE_ADAPTER_ERROR: 925 KdPrint(("RR18xx: DEVICE error event received, pci cause " 926 "reg=%x, don't how to handle this\n", param1)); 927 return MV_TRUE; 928 default: 929 MV_ERROR("RR18xx[%d]: unknown event type (%d)\n", 930 pMvSataAdapter->adapterId, eventType); 931 return MV_FALSE; 932 } 933 return MV_TRUE; 934 } 935 936 static int 937 hptmv_allocate_edma_queues(IAL_ADAPTER_T *pAdapter) 938 { 939 pAdapter->requestsArrayBaseAddr = (MV_U8 *)contigmalloc(REQUESTS_ARRAY_SIZE, 940 M_DEVBUF, M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0ul); 941 if (pAdapter->requestsArrayBaseAddr == NULL) 942 { 943 MV_ERROR("RR18xx[%d]: Failed to allocate memory for EDMA request" 944 " queues\n", pAdapter->mvSataAdapter.adapterId); 945 return -1; 946 } 947 pAdapter->requestsArrayBaseDmaAddr = fOsPhysicalAddress(pAdapter->requestsArrayBaseAddr); 948 pAdapter->requestsArrayBaseAlignedAddr = pAdapter->requestsArrayBaseAddr; 949 pAdapter->requestsArrayBaseAlignedAddr += MV_EDMA_REQUEST_QUEUE_SIZE; 950 pAdapter->requestsArrayBaseAlignedAddr = (MV_U8 *) 951 (((ULONG_PTR)pAdapter->requestsArrayBaseAlignedAddr) & ~(ULONG_PTR)(MV_EDMA_REQUEST_QUEUE_SIZE - 1)); 952 pAdapter->requestsArrayBaseDmaAlignedAddr = pAdapter->requestsArrayBaseDmaAddr; 953 pAdapter->requestsArrayBaseDmaAlignedAddr += MV_EDMA_REQUEST_QUEUE_SIZE; 954 pAdapter->requestsArrayBaseDmaAlignedAddr &= ~(ULONG_PTR)(MV_EDMA_REQUEST_QUEUE_SIZE - 1); 955 956 if ((pAdapter->requestsArrayBaseDmaAlignedAddr - pAdapter->requestsArrayBaseDmaAddr) != 957 (pAdapter->requestsArrayBaseAlignedAddr - pAdapter->requestsArrayBaseAddr)) 958 { 959 MV_ERROR("RR18xx[%d]: Error in Request Quueues Alignment\n", 960 pAdapter->mvSataAdapter.adapterId); 961 contigfree(pAdapter->requestsArrayBaseAddr, REQUESTS_ARRAY_SIZE, M_DEVBUF); 962 return -1; 963 } 964 /* response queues */ 965 pAdapter->responsesArrayBaseAddr = (MV_U8 *)contigmalloc(RESPONSES_ARRAY_SIZE, 966 M_DEVBUF, M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0ul); 967 if (pAdapter->responsesArrayBaseAddr == NULL) 968 { 969 MV_ERROR("RR18xx[%d]: Failed to allocate memory for EDMA response" 970 " queues\n", pAdapter->mvSataAdapter.adapterId); 971 contigfree(pAdapter->requestsArrayBaseAddr, RESPONSES_ARRAY_SIZE, M_DEVBUF); 972 return -1; 973 } 974 pAdapter->responsesArrayBaseDmaAddr = fOsPhysicalAddress(pAdapter->responsesArrayBaseAddr); 975 pAdapter->responsesArrayBaseAlignedAddr = pAdapter->responsesArrayBaseAddr; 976 pAdapter->responsesArrayBaseAlignedAddr += MV_EDMA_RESPONSE_QUEUE_SIZE; 977 pAdapter->responsesArrayBaseAlignedAddr = (MV_U8 *) 978 (((ULONG_PTR)pAdapter->responsesArrayBaseAlignedAddr) & ~(ULONG_PTR)(MV_EDMA_RESPONSE_QUEUE_SIZE - 1)); 979 pAdapter->responsesArrayBaseDmaAlignedAddr = pAdapter->responsesArrayBaseDmaAddr; 980 pAdapter->responsesArrayBaseDmaAlignedAddr += MV_EDMA_RESPONSE_QUEUE_SIZE; 981 pAdapter->responsesArrayBaseDmaAlignedAddr &= ~(ULONG_PTR)(MV_EDMA_RESPONSE_QUEUE_SIZE - 1); 982 983 if ((pAdapter->responsesArrayBaseDmaAlignedAddr - pAdapter->responsesArrayBaseDmaAddr) != 984 (pAdapter->responsesArrayBaseAlignedAddr - pAdapter->responsesArrayBaseAddr)) 985 { 986 MV_ERROR("RR18xx[%d]: Error in Response Quueues Alignment\n", 987 pAdapter->mvSataAdapter.adapterId); 988 contigfree(pAdapter->requestsArrayBaseAddr, REQUESTS_ARRAY_SIZE, M_DEVBUF); 989 contigfree(pAdapter->responsesArrayBaseAddr, RESPONSES_ARRAY_SIZE, M_DEVBUF); 990 return -1; 991 } 992 return 0; 993 } 994 995 static void 996 hptmv_free_edma_queues(IAL_ADAPTER_T *pAdapter) 997 { 998 contigfree(pAdapter->requestsArrayBaseAddr, REQUESTS_ARRAY_SIZE, M_DEVBUF); 999 contigfree(pAdapter->responsesArrayBaseAddr, RESPONSES_ARRAY_SIZE, M_DEVBUF); 1000 } 1001 1002 static PVOID 1003 AllocatePRDTable(IAL_ADAPTER_T *pAdapter) 1004 { 1005 PVOID ret; 1006 if (pAdapter->pFreePRDLink) { 1007 KdPrint(("pAdapter->pFreePRDLink:%p\n",pAdapter->pFreePRDLink)); 1008 ret = pAdapter->pFreePRDLink; 1009 pAdapter->pFreePRDLink = *(void**)ret; 1010 return ret; 1011 } 1012 return NULL; 1013 } 1014 1015 static void 1016 FreePRDTable(IAL_ADAPTER_T *pAdapter, PVOID PRDTable) 1017 { 1018 *(void**)PRDTable = pAdapter->pFreePRDLink; 1019 pAdapter->pFreePRDLink = PRDTable; 1020 } 1021 1022 extern PVDevice fGetFirstChild(PVDevice pLogical); 1023 extern void fResetBootMark(PVDevice pLogical); 1024 static void 1025 fRegisterVdevice(IAL_ADAPTER_T *pAdapter) 1026 { 1027 PVDevice pPhysical, pLogical; 1028 PVBus pVBus; 1029 int i,j; 1030 1031 for(i=0;i<MV_SATA_CHANNELS_NUM;i++) { 1032 pPhysical = &(pAdapter->VDevices[i]); 1033 pLogical = pPhysical; 1034 while (pLogical->pParent) pLogical = pLogical->pParent; 1035 if (pLogical->vf_online==0) { 1036 pPhysical->vf_bootmark = pLogical->vf_bootmark = 0; 1037 continue; 1038 } 1039 if (pLogical->VDeviceType==VD_SPARE || pPhysical!=fGetFirstChild(pLogical)) 1040 continue; 1041 1042 pVBus = &pAdapter->VBus; 1043 if(pVBus) 1044 { 1045 j=0; 1046 while(j<MAX_VDEVICE_PER_VBUS && pVBus->pVDevice[j]) j++; 1047 if(j<MAX_VDEVICE_PER_VBUS){ 1048 pVBus->pVDevice[j] = pLogical; 1049 pLogical->pVBus = pVBus; 1050 1051 if (j>0 && pLogical->vf_bootmark) { 1052 if (pVBus->pVDevice[0]->vf_bootmark) { 1053 fResetBootMark(pLogical); 1054 } 1055 else { 1056 do { pVBus->pVDevice[j] = pVBus->pVDevice[j-1]; } while (--j); 1057 pVBus->pVDevice[0] = pLogical; 1058 } 1059 } 1060 } 1061 } 1062 } 1063 } 1064 1065 PVDevice 1066 GetSpareDisk(_VBUS_ARG PVDevice pArray) 1067 { 1068 IAL_ADAPTER_T *pAdapter = (IAL_ADAPTER_T *)pArray->pVBus->OsExt; 1069 LBA_T capacity = LongDiv(pArray->VDeviceCapacity, pArray->u.array.bArnMember-1); 1070 LBA_T thiscap, maxcap = MAX_LBA_T; 1071 PVDevice pVDevice, pFind = NULL; 1072 int i; 1073 1074 for(i=0;i<MV_SATA_CHANNELS_NUM;i++) 1075 { 1076 pVDevice = &pAdapter->VDevices[i]; 1077 if(!pVDevice) 1078 continue; 1079 thiscap = pArray->vf_format_v2? pVDevice->u.disk.dDeRealCapacity : pVDevice->VDeviceCapacity; 1080 /* find the smallest usable spare disk */ 1081 if (pVDevice->VDeviceType==VD_SPARE && 1082 pVDevice->u.disk.df_on_line && 1083 thiscap < maxcap && 1084 thiscap >= capacity) 1085 { 1086 maxcap = pVDevice->VDeviceCapacity; 1087 pFind = pVDevice; 1088 } 1089 } 1090 return pFind; 1091 } 1092 1093 /****************************************************************** 1094 * IO ATA Command 1095 *******************************************************************/ 1096 int HPTLIBAPI 1097 fDeReadWrite(PDevice pDev, ULONG Lba, UCHAR Cmd, void *tmpBuffer) 1098 { 1099 return mvReadWrite(pDev->mv, Lba, Cmd, tmpBuffer); 1100 } 1101 1102 void HPTLIBAPI fDeSelectMode(PDevice pDev, UCHAR NewMode) 1103 { 1104 MV_SATA_CHANNEL *pSataChannel = pDev->mv; 1105 MV_SATA_ADAPTER *pSataAdapter = pSataChannel->mvSataAdapter; 1106 MV_U8 channelIndex = pSataChannel->channelNumber; 1107 UCHAR mvMode; 1108 /* 508x don't use MW-DMA? */ 1109 if (NewMode>4 && NewMode<8) NewMode = 4; 1110 pDev->bDeModeSetting = NewMode; 1111 if (NewMode<=4) 1112 mvMode = MV_ATA_TRANSFER_PIO_0 + NewMode; 1113 else 1114 mvMode = MV_ATA_TRANSFER_UDMA_0 + (NewMode-8); 1115 1116 /*To fix 88i8030 bug*/ 1117 if (mvMode > MV_ATA_TRANSFER_UDMA_0 && mvMode < MV_ATA_TRANSFER_UDMA_4) 1118 mvMode = MV_ATA_TRANSFER_UDMA_0; 1119 1120 mvSataDisableChannelDma(pSataAdapter, channelIndex); 1121 /* Flush pending commands */ 1122 mvSataFlushDmaQueue (pSataAdapter, channelIndex, MV_FLUSH_TYPE_NONE); 1123 1124 if (mvStorageDevATASetFeatures(pSataAdapter, channelIndex, 1125 MV_ATA_SET_FEATURES_TRANSFER, 1126 mvMode, 0, 0, 0) == MV_FALSE) 1127 { 1128 KdPrint(("channel %d: Set Features failed\n", channelIndex)); 1129 } 1130 /* Enable EDMA */ 1131 if (mvSataEnableChannelDma(pSataAdapter, channelIndex) == MV_FALSE) 1132 KdPrint(("Failed to enable DMA, channel=%d", channelIndex)); 1133 } 1134 1135 int HPTLIBAPI fDeSetTCQ(PDevice pDev, int enable, int depth) 1136 { 1137 MV_SATA_CHANNEL *pSataChannel = pDev->mv; 1138 MV_SATA_ADAPTER *pSataAdapter = pSataChannel->mvSataAdapter; 1139 MV_U8 channelIndex = pSataChannel->channelNumber; 1140 IAL_ADAPTER_T *pAdapter = pSataAdapter->IALData; 1141 MV_CHANNEL *channelInfo = &(pAdapter->mvChannel[channelIndex]); 1142 int dmaActive = pSataChannel->queueCommandsEnabled; 1143 int ret = 0; 1144 1145 if (dmaActive) { 1146 mvSataDisableChannelDma(pSataAdapter, channelIndex); 1147 mvSataFlushDmaQueue(pSataAdapter,channelIndex,MV_FLUSH_TYPE_CALLBACK); 1148 } 1149 1150 if (enable) { 1151 if (pSataChannel->queuedDMA == MV_EDMA_MODE_NOT_QUEUED && 1152 (pSataChannel->identifyDevice[IDEN_SUPPORTED_COMMANDS2] & (0x2))) { 1153 UCHAR depth = ((pSataChannel->identifyDevice[IDEN_QUEUE_DEPTH]) & 0x1f) + 1; 1154 channelInfo->queueDepth = (depth==32)? 31 : depth; 1155 mvSataConfigEdmaMode(pSataAdapter, channelIndex, MV_EDMA_MODE_QUEUED, depth); 1156 ret = 1; 1157 } 1158 } 1159 else 1160 { 1161 if (pSataChannel->queuedDMA != MV_EDMA_MODE_NOT_QUEUED) { 1162 channelInfo->queueDepth = 2; 1163 mvSataConfigEdmaMode(pSataAdapter, channelIndex, MV_EDMA_MODE_NOT_QUEUED, 0); 1164 ret = 1; 1165 } 1166 } 1167 1168 if (dmaActive) 1169 mvSataEnableChannelDma(pSataAdapter,channelIndex); 1170 return ret; 1171 } 1172 1173 int HPTLIBAPI fDeSetNCQ(PDevice pDev, int enable, int depth) 1174 { 1175 return 0; 1176 } 1177 1178 int HPTLIBAPI fDeSetWriteCache(PDevice pDev, int enable) 1179 { 1180 MV_SATA_CHANNEL *pSataChannel = pDev->mv; 1181 MV_SATA_ADAPTER *pSataAdapter = pSataChannel->mvSataAdapter; 1182 MV_U8 channelIndex = pSataChannel->channelNumber; 1183 IAL_ADAPTER_T *pAdapter = pSataAdapter->IALData; 1184 MV_CHANNEL *channelInfo = &(pAdapter->mvChannel[channelIndex]); 1185 int dmaActive = pSataChannel->queueCommandsEnabled; 1186 int ret = 0; 1187 1188 if (dmaActive) { 1189 mvSataDisableChannelDma(pSataAdapter, channelIndex); 1190 mvSataFlushDmaQueue(pSataAdapter,channelIndex,MV_FLUSH_TYPE_CALLBACK); 1191 } 1192 1193 if ((pSataChannel->identifyDevice[82] & (0x20))) { 1194 if (enable) { 1195 if (mvStorageDevATASetFeatures(pSataAdapter, channelIndex, 1196 MV_ATA_SET_FEATURES_ENABLE_WCACHE, 0, 0, 0, 0)) 1197 { 1198 channelInfo->writeCacheEnabled = MV_TRUE; 1199 ret = 1; 1200 } 1201 } 1202 else { 1203 if (mvStorageDevATASetFeatures(pSataAdapter, channelIndex, 1204 MV_ATA_SET_FEATURES_DISABLE_WCACHE, 0, 0, 0, 0)) 1205 { 1206 channelInfo->writeCacheEnabled = MV_FALSE; 1207 ret = 1; 1208 } 1209 } 1210 } 1211 1212 if (dmaActive) 1213 mvSataEnableChannelDma(pSataAdapter,channelIndex); 1214 return ret; 1215 } 1216 1217 int HPTLIBAPI fDeSetReadAhead(PDevice pDev, int enable) 1218 { 1219 MV_SATA_CHANNEL *pSataChannel = pDev->mv; 1220 MV_SATA_ADAPTER *pSataAdapter = pSataChannel->mvSataAdapter; 1221 MV_U8 channelIndex = pSataChannel->channelNumber; 1222 IAL_ADAPTER_T *pAdapter = pSataAdapter->IALData; 1223 MV_CHANNEL *channelInfo = &(pAdapter->mvChannel[channelIndex]); 1224 int dmaActive = pSataChannel->queueCommandsEnabled; 1225 int ret = 0; 1226 1227 if (dmaActive) { 1228 mvSataDisableChannelDma(pSataAdapter, channelIndex); 1229 mvSataFlushDmaQueue(pSataAdapter,channelIndex,MV_FLUSH_TYPE_CALLBACK); 1230 } 1231 1232 if ((pSataChannel->identifyDevice[82] & (0x40))) { 1233 if (enable) { 1234 if (mvStorageDevATASetFeatures(pSataAdapter, channelIndex, 1235 MV_ATA_SET_FEATURES_ENABLE_RLA, 0, 0, 0, 0)) 1236 { 1237 channelInfo->readAheadEnabled = MV_TRUE; 1238 ret = 1; 1239 } 1240 } 1241 else { 1242 if (mvStorageDevATASetFeatures(pSataAdapter, channelIndex, 1243 MV_ATA_SET_FEATURES_DISABLE_RLA, 0, 0, 0, 0)) 1244 { 1245 channelInfo->readAheadEnabled = MV_FALSE; 1246 ret = 1; 1247 } 1248 } 1249 } 1250 1251 if (dmaActive) 1252 mvSataEnableChannelDma(pSataAdapter,channelIndex); 1253 return ret; 1254 } 1255 1256 #ifdef SUPPORT_ARRAY 1257 #define IdeRegisterVDevice fCheckArray 1258 #else 1259 void 1260 IdeRegisterVDevice(PDevice pDev) 1261 { 1262 PVDevice pVDev = Map2pVDevice(pDev); 1263 1264 pVDev->VDeviceType = pDev->df_atapi? VD_ATAPI : 1265 pDev->df_removable_drive? VD_REMOVABLE : VD_SINGLE_DISK; 1266 pVDev->vf_online = 1; 1267 pVDev->VDeviceCapacity = pDev->dDeRealCapacity; 1268 pVDev->pfnSendCommand = pfnSendCommand[pVDev->VDeviceType]; 1269 pVDev->pfnDeviceFailed = pfnDeviceFailed[pVDev->VDeviceType]; 1270 } 1271 #endif 1272 1273 static __inline PBUS_DMAMAP 1274 dmamap_get(struct IALAdapter * pAdapter) 1275 { 1276 PBUS_DMAMAP p = pAdapter->pbus_dmamap_list; 1277 if (p) 1278 pAdapter->pbus_dmamap_list = p-> next; 1279 return p; 1280 } 1281 1282 static __inline void 1283 dmamap_put(PBUS_DMAMAP p) 1284 { 1285 p->next = p->pAdapter->pbus_dmamap_list; 1286 p->pAdapter->pbus_dmamap_list = p; 1287 } 1288 1289 /*Since mtx not provide the initialize when declare, so we Final init here to initialize the global mtx*/ 1290 #if __FreeBSD_version >= 500000 1291 #define override_kernel_driver() 1292 1293 static void hpt_init(void *dummy) 1294 { 1295 override_kernel_driver(); 1296 mtx_init(&driver_lock, "hptsleeplock", NULL, MTX_DEF); 1297 } 1298 SYSINIT(hptinit, SI_SUB_CONFIGURE, SI_ORDER_FIRST, hpt_init, NULL); 1299 #endif 1300 1301 static int num_adapters = 0; 1302 static int 1303 init_adapter(IAL_ADAPTER_T *pAdapter) 1304 { 1305 PVBus _vbus_p = &pAdapter->VBus; 1306 MV_SATA_ADAPTER *pMvSataAdapter; 1307 int i, channel, rid; 1308 1309 PVDevice pVDev; 1310 1311 intrmask_t oldspl = lock_driver(); 1312 1313 pAdapter->next = 0; 1314 1315 if(gIal_Adapter == 0){ 1316 gIal_Adapter = pAdapter; 1317 pCurAdapter = gIal_Adapter; 1318 } 1319 else { 1320 pCurAdapter->next = pAdapter; 1321 pCurAdapter = pAdapter; 1322 } 1323 1324 pAdapter->outstandingCommands = 0; 1325 1326 pMvSataAdapter = &(pAdapter->mvSataAdapter); 1327 _vbus_p->OsExt = (void *)pAdapter; 1328 pMvSataAdapter->IALData = pAdapter; 1329 1330 if (bus_dma_tag_create(bus_get_dma_tag(pAdapter->hpt_dev),/* parent */ 1331 4, /* alignment */ 1332 BUS_SPACE_MAXADDR_32BIT+1, /* boundary */ 1333 BUS_SPACE_MAXADDR, /* lowaddr */ 1334 BUS_SPACE_MAXADDR, /* highaddr */ 1335 NULL, NULL, /* filter, filterarg */ 1336 PAGE_SIZE * (MAX_SG_DESCRIPTORS-1), /* maxsize */ 1337 MAX_SG_DESCRIPTORS, /* nsegments */ 1338 0x10000, /* maxsegsize */ 1339 BUS_DMA_WAITOK, /* flags */ 1340 #if __FreeBSD_version>502000 1341 busdma_lock_mutex, /* lockfunc */ 1342 &driver_lock, /* lockfuncarg */ 1343 #endif 1344 &pAdapter->io_dma_parent /* tag */)) 1345 { 1346 return ENXIO; 1347 } 1348 1349 1350 if (hptmv_allocate_edma_queues(pAdapter)) 1351 { 1352 MV_ERROR("RR18xx: Failed to allocate memory for EDMA queues\n"); 1353 unlock_driver(oldspl); 1354 return ENOMEM; 1355 } 1356 1357 /* also map EPROM address */ 1358 rid = 0x10; 1359 if (!(pAdapter->mem_res = bus_alloc_resource(pAdapter->hpt_dev, SYS_RES_MEMORY, &rid, 1360 0, ~0, MV_SATA_PCI_BAR0_SPACE_SIZE+0x40000, RF_ACTIVE)) 1361 || 1362 !(pMvSataAdapter->adapterIoBaseAddress = rman_get_virtual(pAdapter->mem_res))) 1363 { 1364 MV_ERROR("RR18xx: Failed to remap memory space\n"); 1365 hptmv_free_edma_queues(pAdapter); 1366 unlock_driver(oldspl); 1367 return ENXIO; 1368 } 1369 else 1370 { 1371 KdPrint(("RR18xx: io base address 0x%p\n", pMvSataAdapter->adapterIoBaseAddress)); 1372 } 1373 1374 pMvSataAdapter->adapterId = num_adapters++; 1375 /* get the revision ID */ 1376 pMvSataAdapter->pciConfigRevisionId = pci_read_config(pAdapter->hpt_dev, PCIR_REVID, 1); 1377 pMvSataAdapter->pciConfigDeviceId = pci_get_device(pAdapter->hpt_dev); 1378 1379 /* init RR18xx */ 1380 pMvSataAdapter->intCoalThre[0]= 1; 1381 pMvSataAdapter->intCoalThre[1]= 1; 1382 pMvSataAdapter->intTimeThre[0] = 1; 1383 pMvSataAdapter->intTimeThre[1] = 1; 1384 pMvSataAdapter->pciCommand = 0x0107E371; 1385 pMvSataAdapter->pciSerrMask = 0xd77fe6ul; 1386 pMvSataAdapter->pciInterruptMask = 0xd77fe6ul; 1387 pMvSataAdapter->mvSataEventNotify = hptmv_event_notify; 1388 1389 if (mvSataInitAdapter(pMvSataAdapter) == MV_FALSE) 1390 { 1391 MV_ERROR("RR18xx[%d]: core failed to initialize the adapter\n", 1392 pMvSataAdapter->adapterId); 1393 unregister: 1394 bus_release_resource(pAdapter->hpt_dev, SYS_RES_MEMORY, rid, pAdapter->mem_res); 1395 hptmv_free_edma_queues(pAdapter); 1396 unlock_driver(oldspl); 1397 return ENXIO; 1398 } 1399 pAdapter->ver_601 = pMvSataAdapter->pcbVersion; 1400 1401 #ifndef FOR_DEMO 1402 set_fail_leds(pMvSataAdapter, 0); 1403 #endif 1404 1405 /* setup command blocks */ 1406 KdPrint(("Allocate command blocks\n")); 1407 _vbus_(pFreeCommands) = 0; 1408 pAdapter->pCommandBlocks = 1409 malloc(sizeof(struct _Command) * MAX_COMMAND_BLOCKS_FOR_EACH_VBUS, M_DEVBUF, M_NOWAIT); 1410 KdPrint(("pCommandBlocks:%p\n",pAdapter->pCommandBlocks)); 1411 if (!pAdapter->pCommandBlocks) { 1412 MV_ERROR("insufficient memory\n"); 1413 goto unregister; 1414 } 1415 1416 for (i=0; i<MAX_COMMAND_BLOCKS_FOR_EACH_VBUS; i++) { 1417 FreeCommand(_VBUS_P &(pAdapter->pCommandBlocks[i])); 1418 } 1419 1420 /*Set up the bus_dmamap*/ 1421 pAdapter->pbus_dmamap = (PBUS_DMAMAP)malloc (sizeof(struct _BUS_DMAMAP) * MAX_QUEUE_COMM, M_DEVBUF, M_NOWAIT); 1422 if(!pAdapter->pbus_dmamap) { 1423 MV_ERROR("insufficient memory\n"); 1424 free(pAdapter->pCommandBlocks, M_DEVBUF); 1425 goto unregister; 1426 } 1427 1428 memset((void *)pAdapter->pbus_dmamap, 0, sizeof(struct _BUS_DMAMAP) * MAX_QUEUE_COMM); 1429 pAdapter->pbus_dmamap_list = 0; 1430 for (i=0; i < MAX_QUEUE_COMM; i++) { 1431 PBUS_DMAMAP pmap = &(pAdapter->pbus_dmamap[i]); 1432 pmap->pAdapter = pAdapter; 1433 dmamap_put(pmap); 1434 1435 if(bus_dmamap_create(pAdapter->io_dma_parent, 0, &pmap->dma_map)) { 1436 MV_ERROR("Can not allocate dma map\n"); 1437 free(pAdapter->pCommandBlocks, M_DEVBUF); 1438 free(pAdapter->pbus_dmamap, M_DEVBUF); 1439 goto unregister; 1440 } 1441 } 1442 /* setup PRD Tables */ 1443 KdPrint(("Allocate PRD Tables\n")); 1444 pAdapter->pFreePRDLink = 0; 1445 1446 pAdapter->prdTableAddr = (PUCHAR)contigmalloc( 1447 (PRD_ENTRIES_SIZE*PRD_TABLES_FOR_VBUS + 32), M_DEVBUF, M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0ul); 1448 1449 KdPrint(("prdTableAddr:%p\n",pAdapter->prdTableAddr)); 1450 if (!pAdapter->prdTableAddr) { 1451 MV_ERROR("insufficient PRD Tables\n"); 1452 goto unregister; 1453 } 1454 pAdapter->prdTableAlignedAddr = (PUCHAR)(((ULONG_PTR)pAdapter->prdTableAddr + 0x1f) & ~(ULONG_PTR)0x1fL); 1455 { 1456 PUCHAR PRDTable = pAdapter->prdTableAlignedAddr; 1457 for (i=0; i<PRD_TABLES_FOR_VBUS; i++) 1458 { 1459 /* KdPrint(("i=%d,pAdapter->pFreePRDLink=%p\n",i,pAdapter->pFreePRDLink)); */ 1460 FreePRDTable(pAdapter, PRDTable); 1461 PRDTable += PRD_ENTRIES_SIZE; 1462 } 1463 } 1464 1465 /* enable the adapter interrupts */ 1466 1467 /* configure and start the connected channels*/ 1468 for (channel = 0; channel < MV_SATA_CHANNELS_NUM; channel++) 1469 { 1470 pAdapter->mvChannel[channel].online = MV_FALSE; 1471 if (mvSataIsStorageDeviceConnected(pMvSataAdapter, channel) 1472 == MV_TRUE) 1473 { 1474 KdPrint(("RR18xx[%d]: channel %d is connected\n", 1475 pMvSataAdapter->adapterId, channel)); 1476 1477 if (hptmv_init_channel(pAdapter, channel) == 0) 1478 { 1479 if (mvSataConfigureChannel(pMvSataAdapter, channel) == MV_FALSE) 1480 { 1481 MV_ERROR("RR18xx[%d]: Failed to configure channel" 1482 " %d\n",pMvSataAdapter->adapterId, channel); 1483 hptmv_free_channel(pAdapter, channel); 1484 } 1485 else 1486 { 1487 if (start_channel(pAdapter, channel)) 1488 { 1489 MV_ERROR("RR18xx[%d]: Failed to start channel," 1490 " channel=%d\n",pMvSataAdapter->adapterId, 1491 channel); 1492 hptmv_free_channel(pAdapter, channel); 1493 } 1494 pAdapter->mvChannel[channel].online = MV_TRUE; 1495 /* mvSataChannelSetEdmaLoopBackMode(pMvSataAdapter, 1496 channel, 1497 MV_TRUE);*/ 1498 } 1499 } 1500 } 1501 KdPrint(("pAdapter->mvChannel[channel].online:%x, channel:%d\n", 1502 pAdapter->mvChannel[channel].online, channel)); 1503 } 1504 1505 #ifdef SUPPORT_ARRAY 1506 for(i = MAX_ARRAY_DEVICE - 1; i >= 0; i--) { 1507 pVDev = ArrayTables(i); 1508 mArFreeArrayTable(pVDev); 1509 } 1510 #endif 1511 1512 KdPrint(("Initialize Devices\n")); 1513 for (channel = 0; channel < MV_SATA_CHANNELS_NUM; channel++) { 1514 MV_SATA_CHANNEL *pMvSataChannel = pMvSataAdapter->sataChannel[channel]; 1515 if (pMvSataChannel) { 1516 init_vdev_params(pAdapter, channel); 1517 IdeRegisterVDevice(&pAdapter->VDevices[channel].u.disk); 1518 } 1519 } 1520 #ifdef SUPPORT_ARRAY 1521 CheckArrayCritical(_VBUS_P0); 1522 #endif 1523 _vbus_p->nInstances = 1; 1524 fRegisterVdevice(pAdapter); 1525 1526 for (channel=0;channel<MV_SATA_CHANNELS_NUM;channel++) { 1527 pVDev = _vbus_p->pVDevice[channel]; 1528 if (pVDev && pVDev->vf_online) 1529 fCheckBootable(pVDev); 1530 } 1531 1532 #if defined(SUPPORT_ARRAY) && defined(_RAID5N_) 1533 init_raid5_memory(_VBUS_P0); 1534 _vbus_(r5).enable_write_back = 1; 1535 printf("RR18xx: RAID5 write-back %s\n", _vbus_(r5).enable_write_back? "enabled" : "disabled"); 1536 #endif 1537 1538 mvSataUnmaskAdapterInterrupt(pMvSataAdapter); 1539 unlock_driver(oldspl); 1540 return 0; 1541 } 1542 1543 int 1544 MvSataResetChannel(MV_SATA_ADAPTER *pMvSataAdapter, MV_U8 channel) 1545 { 1546 IAL_ADAPTER_T *pAdapter = (IAL_ADAPTER_T *)pMvSataAdapter->IALData; 1547 1548 mvSataDisableChannelDma(pMvSataAdapter, channel); 1549 /* Flush pending commands */ 1550 mvSataFlushDmaQueue (pMvSataAdapter, channel, MV_FLUSH_TYPE_CALLBACK); 1551 1552 /* Software reset channel */ 1553 if (mvStorageDevATASoftResetDevice(pMvSataAdapter, channel) == MV_FALSE) 1554 { 1555 MV_ERROR("RR18xx [%d,%d]: failed to perform Software reset\n", 1556 pMvSataAdapter->adapterId, channel); 1557 hptmv_free_channel(pAdapter, channel); 1558 return -1; 1559 } 1560 1561 /* Hardware reset channel */ 1562 if (mvSataChannelHardReset(pMvSataAdapter, channel)== MV_FALSE) 1563 { 1564 MV_ERROR("RR18xx [%d,%d] Failed to Hard reser the SATA channel\n", 1565 pMvSataAdapter->adapterId, channel); 1566 hptmv_free_channel(pAdapter, channel); 1567 return -1; 1568 } 1569 1570 if (mvSataIsStorageDeviceConnected(pMvSataAdapter, channel) == MV_FALSE) 1571 { 1572 MV_ERROR("RR18xx [%d,%d] Failed to Connect Device\n", 1573 pMvSataAdapter->adapterId, channel); 1574 hptmv_free_channel(pAdapter, channel); 1575 return -1; 1576 }else 1577 { 1578 MV_ERROR("channel %d: perform recalibrate command", channel); 1579 if (!mvStorageDevATAExecuteNonUDMACommand(pMvSataAdapter, channel, 1580 MV_NON_UDMA_PROTOCOL_NON_DATA, 1581 MV_FALSE, 1582 NULL, /* pBuffer*/ 1583 0, /* count */ 1584 0, /*features*/ 1585 /* sectorCount */ 1586 0, 1587 0, /* lbaLow */ 1588 0, /* lbaMid */ 1589 /* lbaHigh */ 1590 0, 1591 0, /* device */ 1592 /* command */ 1593 0x10)) 1594 MV_ERROR("channel %d: recalibrate failed", channel); 1595 1596 /* Set transfer mode */ 1597 if((mvStorageDevATASetFeatures(pMvSataAdapter, channel, 1598 MV_ATA_SET_FEATURES_TRANSFER, 1599 MV_ATA_TRANSFER_PIO_SLOW, 0, 0, 0) == MV_FALSE) || 1600 (mvStorageDevATASetFeatures(pMvSataAdapter, channel, 1601 MV_ATA_SET_FEATURES_TRANSFER, 1602 pAdapter->mvChannel[channel].maxPioModeSupported, 0, 0, 0) == MV_FALSE) || 1603 (mvStorageDevATASetFeatures(pMvSataAdapter, channel, 1604 MV_ATA_SET_FEATURES_TRANSFER, 1605 pAdapter->mvChannel[channel].maxUltraDmaModeSupported, 0, 0, 0) == MV_FALSE) ) 1606 { 1607 MV_ERROR("channel %d: Set Features failed", channel); 1608 hptmv_free_channel(pAdapter, channel); 1609 return -1; 1610 } 1611 /* Enable EDMA */ 1612 if (mvSataEnableChannelDma(pMvSataAdapter, channel) == MV_FALSE) 1613 { 1614 MV_ERROR("Failed to enable DMA, channel=%d", channel); 1615 hptmv_free_channel(pAdapter, channel); 1616 return -1; 1617 } 1618 } 1619 return 0; 1620 } 1621 1622 static int 1623 fResetActiveCommands(PVBus _vbus_p) 1624 { 1625 MV_SATA_ADAPTER *pMvSataAdapter = &((IAL_ADAPTER_T *)_vbus_p->OsExt)->mvSataAdapter; 1626 MV_U8 channel; 1627 for (channel=0;channel< MV_SATA_CHANNELS_NUM;channel++) { 1628 if (pMvSataAdapter->sataChannel[channel] && pMvSataAdapter->sataChannel[channel]->outstandingCommands) 1629 MvSataResetChannel(pMvSataAdapter,channel); 1630 } 1631 return 0; 1632 } 1633 1634 void fCompleteAllCommandsSynchronously(PVBus _vbus_p) 1635 { 1636 UINT cont; 1637 ULONG ticks = 0; 1638 MV_U8 channel; 1639 MV_SATA_ADAPTER *pMvSataAdapter = &((IAL_ADAPTER_T *)_vbus_p->OsExt)->mvSataAdapter; 1640 MV_SATA_CHANNEL *pMvSataChannel; 1641 1642 do { 1643 check_cmds: 1644 cont = 0; 1645 CheckPendingCall(_VBUS_P0); 1646 #ifdef _RAID5N_ 1647 dataxfer_poll(); 1648 xor_poll(); 1649 #endif 1650 for (channel=0;channel< MV_SATA_CHANNELS_NUM;channel++) { 1651 pMvSataChannel = pMvSataAdapter->sataChannel[channel]; 1652 if (pMvSataChannel && pMvSataChannel->outstandingCommands) 1653 { 1654 while (pMvSataChannel->outstandingCommands) { 1655 if (!mvSataInterruptServiceRoutine(pMvSataAdapter)) { 1656 StallExec(1000); 1657 if (ticks++ > 3000) { 1658 MvSataResetChannel(pMvSataAdapter,channel); 1659 goto check_cmds; 1660 } 1661 } 1662 else 1663 ticks = 0; 1664 } 1665 cont = 1; 1666 } 1667 } 1668 } while (cont); 1669 } 1670 1671 void 1672 fResetVBus(_VBUS_ARG0) 1673 { 1674 KdPrint(("fMvResetBus(%p)", _vbus_p)); 1675 1676 /* some commands may already finished. */ 1677 CheckPendingCall(_VBUS_P0); 1678 1679 fResetActiveCommands(_vbus_p); 1680 /* 1681 * the other pending commands may still be finished successfully. 1682 */ 1683 fCompleteAllCommandsSynchronously(_vbus_p); 1684 1685 /* Now there should be no pending commands. No more action needed. */ 1686 CheckIdleCall(_VBUS_P0); 1687 1688 KdPrint(("fMvResetBus() done")); 1689 } 1690 1691 /*No rescan function*/ 1692 void 1693 fRescanAllDevice(_VBUS_ARG0) 1694 { 1695 } 1696 1697 static MV_BOOLEAN 1698 CommandCompletionCB(MV_SATA_ADAPTER *pMvSataAdapter, 1699 MV_U8 channelNum, 1700 MV_COMPLETION_TYPE comp_type, 1701 MV_VOID_PTR commandId, 1702 MV_U16 responseFlags, 1703 MV_U32 timeStamp, 1704 MV_STORAGE_DEVICE_REGISTERS *registerStruct) 1705 { 1706 PCommand pCmd = (PCommand) commandId; 1707 _VBUS_INST(pCmd->pVDevice->pVBus) 1708 1709 if (pCmd->uScratch.sata_param.prdAddr) 1710 FreePRDTable(pMvSataAdapter->IALData,pCmd->uScratch.sata_param.prdAddr); 1711 1712 switch (comp_type) 1713 { 1714 case MV_COMPLETION_TYPE_NORMAL: 1715 pCmd->Result = RETURN_SUCCESS; 1716 break; 1717 case MV_COMPLETION_TYPE_ABORT: 1718 pCmd->Result = RETURN_BUS_RESET; 1719 break; 1720 case MV_COMPLETION_TYPE_ERROR: 1721 MV_ERROR("IAL: COMPLETION ERROR, adapter %d, channel %d, flags=%x\n", 1722 pMvSataAdapter->adapterId, channelNum, responseFlags); 1723 1724 if (responseFlags & 4) { 1725 MV_ERROR("ATA regs: error %x, sector count %x, LBA low %x, LBA mid %x," 1726 " LBA high %x, device %x, status %x\n", 1727 registerStruct->errorRegister, 1728 registerStruct->sectorCountRegister, 1729 registerStruct->lbaLowRegister, 1730 registerStruct->lbaMidRegister, 1731 registerStruct->lbaHighRegister, 1732 registerStruct->deviceRegister, 1733 registerStruct->statusRegister); 1734 } 1735 /*We can't do handleEdmaError directly here, because CommandCompletionCB is called by 1736 * mv's ISR, if we retry the command, than the internel data structure may be destroyed*/ 1737 pCmd->uScratch.sata_param.responseFlags = responseFlags; 1738 pCmd->uScratch.sata_param.bIdeStatus = registerStruct->statusRegister; 1739 pCmd->uScratch.sata_param.errorRegister = registerStruct->errorRegister; 1740 pCmd->pVDevice->u.disk.QueueLength--; 1741 CallAfterReturn(_VBUS_P (DPC_PROC)handleEdmaError,pCmd); 1742 return TRUE; 1743 1744 default: 1745 MV_ERROR(" Unknown completion type (%d)\n", comp_type); 1746 return MV_FALSE; 1747 } 1748 1749 if (pCmd->uCmd.Ide.Command == IDE_COMMAND_VERIFY && pCmd->uScratch.sata_param.cmd_priv > 1) { 1750 pCmd->uScratch.sata_param.cmd_priv --; 1751 return TRUE; 1752 } 1753 pCmd->pVDevice->u.disk.QueueLength--; 1754 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1755 return TRUE; 1756 } 1757 1758 void 1759 fDeviceSendCommand(_VBUS_ARG PCommand pCmd) 1760 { 1761 MV_SATA_EDMA_PRD_ENTRY *pPRDTable = 0; 1762 MV_SATA_ADAPTER *pMvSataAdapter; 1763 MV_SATA_CHANNEL *pMvSataChannel; 1764 PVDevice pVDevice = pCmd->pVDevice; 1765 PDevice pDevice = &pVDevice->u.disk; 1766 LBA_T Lba = pCmd->uCmd.Ide.Lba; 1767 USHORT nSector = pCmd->uCmd.Ide.nSectors; 1768 1769 MV_QUEUE_COMMAND_RESULT result; 1770 MV_QUEUE_COMMAND_INFO commandInfo; 1771 MV_UDMA_COMMAND_PARAMS *pUdmaParams = &commandInfo.commandParams.udmaCommand; 1772 MV_NONE_UDMA_COMMAND_PARAMS *pNoUdmaParams = &commandInfo.commandParams.NoneUdmaCommand; 1773 1774 MV_BOOLEAN is48bit; 1775 MV_U8 channel; 1776 int i=0; 1777 1778 DECLARE_BUFFER(FPSCAT_GATH, tmpSg); 1779 1780 if (!pDevice->df_on_line) { 1781 MV_ERROR("Device is offline"); 1782 pCmd->Result = RETURN_BAD_DEVICE; 1783 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1784 return; 1785 } 1786 1787 pDevice->HeadPosition = pCmd->uCmd.Ide.Lba + pCmd->uCmd.Ide.nSectors; 1788 pMvSataChannel = pDevice->mv; 1789 pMvSataAdapter = pMvSataChannel->mvSataAdapter; 1790 channel = pMvSataChannel->channelNumber; 1791 1792 /* old RAID0 has hidden lba. Remember to clear dDeHiddenLba when delete array! */ 1793 Lba += pDevice->dDeHiddenLba; 1794 /* check LBA */ 1795 if (Lba+nSector-1 > pDevice->dDeRealCapacity) { 1796 pCmd->Result = RETURN_INVALID_REQUEST; 1797 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1798 return; 1799 } 1800 1801 /* 1802 * always use 48bit LBA if drive supports it. 1803 * Some Seagate drives report error if you use a 28-bit command 1804 * to access sector 0xfffffff. 1805 */ 1806 is48bit = pMvSataChannel->lba48Address; 1807 1808 switch (pCmd->uCmd.Ide.Command) 1809 { 1810 case IDE_COMMAND_READ: 1811 case IDE_COMMAND_WRITE: 1812 if (pDevice->bDeModeSetting<8) goto pio; 1813 1814 commandInfo.type = MV_QUEUED_COMMAND_TYPE_UDMA; 1815 pUdmaParams->isEXT = is48bit; 1816 pUdmaParams->numOfSectors = nSector; 1817 pUdmaParams->lowLBAAddress = Lba; 1818 pUdmaParams->highLBAAddress = 0; 1819 pUdmaParams->prdHighAddr = 0; 1820 pUdmaParams->callBack = CommandCompletionCB; 1821 pUdmaParams->commandId = (MV_VOID_PTR )pCmd; 1822 if(pCmd->uCmd.Ide.Command == IDE_COMMAND_READ) 1823 pUdmaParams->readWrite = MV_UDMA_TYPE_READ; 1824 else 1825 pUdmaParams->readWrite = MV_UDMA_TYPE_WRITE; 1826 1827 if (pCmd->pSgTable && pCmd->cf_physical_sg) { 1828 FPSCAT_GATH sg1=tmpSg, sg2=pCmd->pSgTable; 1829 do { *sg1++=*sg2; } while ((sg2++->wSgFlag & SG_FLAG_EOT)==0); 1830 } 1831 else { 1832 if (!pCmd->pfnBuildSgl || !pCmd->pfnBuildSgl(_VBUS_P pCmd, tmpSg, 0)) { 1833 pio: 1834 mvSataDisableChannelDma(pMvSataAdapter, channel); 1835 mvSataFlushDmaQueue(pMvSataAdapter, channel, MV_FLUSH_TYPE_CALLBACK); 1836 1837 if (pCmd->pSgTable && pCmd->cf_physical_sg==0) { 1838 FPSCAT_GATH sg1=tmpSg, sg2=pCmd->pSgTable; 1839 do { *sg1++=*sg2; } while ((sg2++->wSgFlag & SG_FLAG_EOT)==0); 1840 } 1841 else { 1842 if (!pCmd->pfnBuildSgl || !pCmd->pfnBuildSgl(_VBUS_P pCmd, tmpSg, 1)) { 1843 pCmd->Result = RETURN_NEED_LOGICAL_SG; 1844 goto finish_cmd; 1845 } 1846 } 1847 1848 do { 1849 ULONG size = tmpSg->wSgSize? tmpSg->wSgSize : 0x10000; 1850 ULONG_PTR addr = tmpSg->dSgAddress; 1851 if (size & 0x1ff) { 1852 pCmd->Result = RETURN_INVALID_REQUEST; 1853 goto finish_cmd; 1854 } 1855 if (mvStorageDevATAExecuteNonUDMACommand(pMvSataAdapter, channel, 1856 (pCmd->cf_data_out)?MV_NON_UDMA_PROTOCOL_PIO_DATA_OUT:MV_NON_UDMA_PROTOCOL_PIO_DATA_IN, 1857 is48bit, 1858 (MV_U16_PTR)addr, 1859 size >> 1, /* count */ 1860 0, /* features N/A */ 1861 (MV_U16)(size>>9), /*sector count*/ 1862 (MV_U16)( (is48bit? (MV_U16)((Lba >> 16) & 0xFF00) : 0 ) | (UCHAR)(Lba & 0xFF) ), /*lbalow*/ 1863 (MV_U16)((Lba >> 8) & 0xFF), /* lbaMid */ 1864 (MV_U16)((Lba >> 16) & 0xFF),/* lbaHigh */ 1865 (MV_U8)(0x40 | (is48bit ? 0 : (UCHAR)(Lba >> 24) & 0xFF )),/* device */ 1866 (MV_U8)(is48bit ? (pCmd->cf_data_in?IDE_COMMAND_READ_EXT:IDE_COMMAND_WRITE_EXT):pCmd->uCmd.Ide.Command) 1867 )==MV_FALSE) 1868 { 1869 pCmd->Result = RETURN_IDE_ERROR; 1870 goto finish_cmd; 1871 } 1872 Lba += size>>9; 1873 if(Lba & 0xF0000000) is48bit = MV_TRUE; 1874 } 1875 while ((tmpSg++->wSgFlag & SG_FLAG_EOT)==0); 1876 pCmd->Result = RETURN_SUCCESS; 1877 finish_cmd: 1878 mvSataEnableChannelDma(pMvSataAdapter,channel); 1879 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1880 return; 1881 } 1882 } 1883 1884 pPRDTable = (MV_SATA_EDMA_PRD_ENTRY *) AllocatePRDTable(pMvSataAdapter->IALData); 1885 KdPrint(("pPRDTable:%p\n",pPRDTable)); 1886 if (!pPRDTable) { 1887 pCmd->Result = RETURN_DEVICE_BUSY; 1888 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1889 HPT_ASSERT(0); 1890 return; 1891 } 1892 1893 do{ 1894 pPRDTable[i].highBaseAddr = (sizeof(tmpSg->dSgAddress)>4 ? (MV_U32)(tmpSg->dSgAddress>>32) : 0); 1895 pPRDTable[i].flags = (MV_U16)tmpSg->wSgFlag; 1896 pPRDTable[i].byteCount = (MV_U16)tmpSg->wSgSize; 1897 pPRDTable[i].lowBaseAddr = (MV_U32)tmpSg->dSgAddress; 1898 pPRDTable[i].reserved = 0; 1899 i++; 1900 }while((tmpSg++->wSgFlag & SG_FLAG_EOT)==0); 1901 1902 pUdmaParams->prdLowAddr = (ULONG)fOsPhysicalAddress(pPRDTable); 1903 if ((pUdmaParams->numOfSectors == 256) && (pMvSataChannel->lba48Address == MV_FALSE)) { 1904 pUdmaParams->numOfSectors = 0; 1905 } 1906 1907 pCmd->uScratch.sata_param.prdAddr = (PVOID)pPRDTable; 1908 1909 result = mvSataQueueCommand(pMvSataAdapter, channel, &commandInfo); 1910 1911 if (result != MV_QUEUE_COMMAND_RESULT_OK) 1912 { 1913 queue_failed: 1914 switch (result) 1915 { 1916 case MV_QUEUE_COMMAND_RESULT_BAD_LBA_ADDRESS: 1917 MV_ERROR("IAL Error: Edma Queue command failed. Bad LBA " 1918 "LBA[31:0](0x%08x)\n", pUdmaParams->lowLBAAddress); 1919 pCmd->Result = RETURN_IDE_ERROR; 1920 break; 1921 case MV_QUEUE_COMMAND_RESULT_QUEUED_MODE_DISABLED: 1922 MV_ERROR("IAL Error: Edma Queue command failed. EDMA" 1923 " disabled adapter %d channel %d\n", 1924 pMvSataAdapter->adapterId, channel); 1925 mvSataEnableChannelDma(pMvSataAdapter,channel); 1926 pCmd->Result = RETURN_IDE_ERROR; 1927 break; 1928 case MV_QUEUE_COMMAND_RESULT_FULL: 1929 MV_ERROR("IAL Error: Edma Queue command failed. Queue is" 1930 " Full adapter %d channel %d\n", 1931 pMvSataAdapter->adapterId, channel); 1932 pCmd->Result = RETURN_DEVICE_BUSY; 1933 break; 1934 case MV_QUEUE_COMMAND_RESULT_BAD_PARAMS: 1935 MV_ERROR("IAL Error: Edma Queue command failed. (Bad " 1936 "Params), pMvSataAdapter: %p, pSataChannel: %p.\n", 1937 pMvSataAdapter, pMvSataAdapter->sataChannel[channel]); 1938 pCmd->Result = RETURN_IDE_ERROR; 1939 break; 1940 default: 1941 MV_ERROR("IAL Error: Bad result value (%d) from queue" 1942 " command\n", result); 1943 pCmd->Result = RETURN_IDE_ERROR; 1944 } 1945 if(pPRDTable) 1946 FreePRDTable(pMvSataAdapter->IALData,pPRDTable); 1947 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1948 } 1949 pDevice->QueueLength++; 1950 return; 1951 1952 case IDE_COMMAND_VERIFY: 1953 commandInfo.type = MV_QUEUED_COMMAND_TYPE_NONE_UDMA; 1954 pNoUdmaParams->bufPtr = NULL; 1955 pNoUdmaParams->callBack = CommandCompletionCB; 1956 pNoUdmaParams->commandId = (MV_VOID_PTR)pCmd; 1957 pNoUdmaParams->count = 0; 1958 pNoUdmaParams->features = 0; 1959 pNoUdmaParams->protocolType = MV_NON_UDMA_PROTOCOL_NON_DATA; 1960 1961 pCmd->uScratch.sata_param.cmd_priv = 1; 1962 if (pMvSataChannel->lba48Address == MV_TRUE){ 1963 pNoUdmaParams->command = MV_ATA_COMMAND_READ_VERIFY_SECTORS_EXT; 1964 pNoUdmaParams->isEXT = MV_TRUE; 1965 pNoUdmaParams->lbaHigh = (MV_U16)((Lba & 0xff0000) >> 16); 1966 pNoUdmaParams->lbaMid = (MV_U16)((Lba & 0xff00) >> 8); 1967 pNoUdmaParams->lbaLow = 1968 (MV_U16)(((Lba & 0xff000000) >> 16)| (Lba & 0xff)); 1969 pNoUdmaParams->sectorCount = nSector; 1970 pNoUdmaParams->device = 0x40; 1971 result = mvSataQueueCommand(pMvSataAdapter, channel, &commandInfo); 1972 if (result != MV_QUEUE_COMMAND_RESULT_OK){ 1973 goto queue_failed; 1974 } 1975 return; 1976 } 1977 else{ 1978 pNoUdmaParams->command = MV_ATA_COMMAND_READ_VERIFY_SECTORS; 1979 pNoUdmaParams->isEXT = MV_FALSE; 1980 pNoUdmaParams->lbaHigh = (MV_U16)((Lba & 0xff0000) >> 16); 1981 pNoUdmaParams->lbaMid = (MV_U16)((Lba & 0xff00) >> 8); 1982 pNoUdmaParams->lbaLow = (MV_U16)(Lba & 0xff); 1983 pNoUdmaParams->sectorCount = 0xff & nSector; 1984 pNoUdmaParams->device = (MV_U8)(0x40 | 1985 ((Lba & 0xf000000) >> 24)); 1986 pNoUdmaParams->callBack = CommandCompletionCB; 1987 result = mvSataQueueCommand(pMvSataAdapter, channel, &commandInfo); 1988 /*FIXME: how about the commands already queued? but marvel also forgets to consider this*/ 1989 if (result != MV_QUEUE_COMMAND_RESULT_OK){ 1990 goto queue_failed; 1991 } 1992 } 1993 break; 1994 default: 1995 pCmd->Result = RETURN_INVALID_REQUEST; 1996 CallAfterReturn(_VBUS_P (DPC_PROC)pCmd->pfnCompletion, pCmd); 1997 break; 1998 } 1999 } 2000 2001 /********************************************************** 2002 * 2003 * Probe the hostadapter. 2004 * 2005 **********************************************************/ 2006 static int 2007 hpt_probe(device_t dev) 2008 { 2009 if ((pci_get_vendor(dev) == MV_SATA_VENDOR_ID) && 2010 (pci_get_device(dev) == MV_SATA_DEVICE_ID_5081 2011 #ifdef FOR_DEMO 2012 || pci_get_device(dev) == MV_SATA_DEVICE_ID_5080 2013 #endif 2014 )) 2015 { 2016 KdPrintI((CONTROLLER_NAME " found\n")); 2017 device_set_desc(dev, CONTROLLER_NAME); 2018 return 0; 2019 } 2020 else 2021 return(ENXIO); 2022 } 2023 2024 /*********************************************************** 2025 * 2026 * Auto configuration: attach and init a host adapter. 2027 * 2028 ***********************************************************/ 2029 static int 2030 hpt_attach(device_t dev) 2031 { 2032 IAL_ADAPTER_T * pAdapter = device_get_softc(dev); 2033 int rid; 2034 union ccb *ccb; 2035 struct cam_devq *devq; 2036 struct cam_sim *hpt_vsim; 2037 2038 printf("%s Version %s \n", DRIVER_NAME, DRIVER_VERSION); 2039 2040 if (!pAdapter) 2041 { 2042 pAdapter = (IAL_ADAPTER_T *)malloc(sizeof (IAL_ADAPTER_T), M_DEVBUF, M_NOWAIT); 2043 #if __FreeBSD_version > 410000 2044 device_set_softc(dev, (void *)pAdapter); 2045 #else 2046 device_set_driver(dev, (driver_t *)pAdapter); 2047 #endif 2048 } 2049 2050 if (!pAdapter) return (ENOMEM); 2051 bzero(pAdapter, sizeof(IAL_ADAPTER_T)); 2052 2053 pAdapter->hpt_dev = dev; 2054 2055 rid = init_adapter(pAdapter); 2056 if (rid) 2057 return rid; 2058 2059 rid = 0; 2060 if ((pAdapter->hpt_irq = bus_alloc_resource(pAdapter->hpt_dev, SYS_RES_IRQ, &rid, 0, ~0ul, 1, RF_SHAREABLE | RF_ACTIVE)) == NULL) 2061 { 2062 hpt_printk(("can't allocate interrupt\n")); 2063 return(ENXIO); 2064 } 2065 2066 #if __FreeBSD_version <700000 2067 if (bus_setup_intr(pAdapter->hpt_dev, pAdapter->hpt_irq, INTR_TYPE_CAM, 2068 hpt_intr, pAdapter, &pAdapter->hpt_intr)) 2069 #else 2070 if (bus_setup_intr(pAdapter->hpt_dev, pAdapter->hpt_irq, INTR_TYPE_CAM, 2071 NULL, hpt_intr, pAdapter, &pAdapter->hpt_intr)) 2072 #endif 2073 { 2074 hpt_printk(("can't set up interrupt\n")); 2075 free(pAdapter, M_DEVBUF); 2076 return(ENXIO); 2077 } 2078 2079 2080 if((ccb = (union ccb *)malloc(sizeof(*ccb), M_DEVBUF, M_WAITOK)) != (union ccb*)NULL) 2081 { 2082 bzero(ccb, sizeof(*ccb)); 2083 ccb->ccb_h.pinfo.priority = 1; 2084 ccb->ccb_h.pinfo.index = CAM_UNQUEUED_INDEX; 2085 } 2086 else 2087 { 2088 return ENOMEM; 2089 } 2090 /* 2091 * Create the device queue for our SIM(s). 2092 */ 2093 if((devq = cam_simq_alloc(8/*MAX_QUEUE_COMM*/)) == NULL) 2094 { 2095 KdPrint(("ENXIO\n")); 2096 return ENOMEM; 2097 } 2098 2099 /* 2100 * Construct our SIM entry 2101 */ 2102 #if __FreeBSD_version <700000 2103 hpt_vsim = cam_sim_alloc(hpt_action, hpt_poll, __str(PROC_DIR_NAME), 2104 pAdapter, device_get_unit(pAdapter->hpt_dev), 1, 8, devq); 2105 #else 2106 hpt_vsim = cam_sim_alloc(hpt_action, hpt_poll, __str(PROC_DIR_NAME), 2107 pAdapter, device_get_unit(pAdapter->hpt_dev), &Giant, 1, 8, devq); 2108 #endif 2109 if (hpt_vsim == NULL) { 2110 cam_simq_free(devq); 2111 return ENOMEM; 2112 } 2113 2114 #if __FreeBSD_version <700000 2115 if (xpt_bus_register(hpt_vsim, 0) != CAM_SUCCESS) 2116 #else 2117 if (xpt_bus_register(hpt_vsim, dev, 0) != CAM_SUCCESS) 2118 #endif 2119 { 2120 cam_sim_free(hpt_vsim, /*free devq*/ TRUE); 2121 hpt_vsim = NULL; 2122 return ENXIO; 2123 } 2124 2125 if(xpt_create_path(&pAdapter->path, /*periph */ NULL, 2126 cam_sim_path(hpt_vsim), CAM_TARGET_WILDCARD, 2127 CAM_LUN_WILDCARD) != CAM_REQ_CMP) 2128 { 2129 xpt_bus_deregister(cam_sim_path(hpt_vsim)); 2130 cam_sim_free(hpt_vsim, /*free_devq*/TRUE); 2131 hpt_vsim = NULL; 2132 return ENXIO; 2133 } 2134 2135 xpt_setup_ccb(&(ccb->ccb_h), pAdapter->path, /*priority*/5); 2136 ccb->ccb_h.func_code = XPT_SASYNC_CB; 2137 ccb->csa.event_enable = AC_LOST_DEVICE; 2138 ccb->csa.callback = hpt_async; 2139 ccb->csa.callback_arg = hpt_vsim; 2140 xpt_action((union ccb *)ccb); 2141 free(ccb, M_DEVBUF); 2142 2143 if (device_get_unit(dev) == 0) { 2144 /* Start the work thread. XXX */ 2145 launch_worker_thread(); 2146 } 2147 2148 return 0; 2149 } 2150 2151 static int 2152 hpt_detach(device_t dev) 2153 { 2154 return (EBUSY); 2155 } 2156 2157 2158 /*************************************************************** 2159 * The poll function is used to simulate the interrupt when 2160 * the interrupt subsystem is not functioning. 2161 * 2162 ***************************************************************/ 2163 static void 2164 hpt_poll(struct cam_sim *sim) 2165 { 2166 hpt_intr((void *)cam_sim_softc(sim)); 2167 } 2168 2169 /**************************************************************** 2170 * Name: hpt_intr 2171 * Description: Interrupt handler. 2172 ****************************************************************/ 2173 static void 2174 hpt_intr(void *arg) 2175 { 2176 IAL_ADAPTER_T *pAdapter = (IAL_ADAPTER_T *)arg; 2177 intrmask_t oldspl = lock_driver(); 2178 2179 /* KdPrintI(("----- Entering Isr() -----\n")); */ 2180 if (mvSataInterruptServiceRoutine(&pAdapter->mvSataAdapter) == MV_TRUE) 2181 { 2182 _VBUS_INST(&pAdapter->VBus) 2183 CheckPendingCall(_VBUS_P0); 2184 } 2185 2186 /* KdPrintI(("----- Leaving Isr() -----\n")); */ 2187 unlock_driver(oldspl); 2188 } 2189 2190 /********************************************************** 2191 * Asynchronous Events 2192 *********************************************************/ 2193 #if (!defined(UNREFERENCED_PARAMETER)) 2194 #define UNREFERENCED_PARAMETER(x) (void)(x) 2195 #endif 2196 2197 static void 2198 hpt_async(void * callback_arg, u_int32_t code, struct cam_path * path, 2199 void * arg) 2200 { 2201 /* debug XXXX */ 2202 panic("Here"); 2203 UNREFERENCED_PARAMETER(callback_arg); 2204 UNREFERENCED_PARAMETER(code); 2205 UNREFERENCED_PARAMETER(path); 2206 UNREFERENCED_PARAMETER(arg); 2207 2208 } 2209 2210 static void 2211 FlushAdapter(IAL_ADAPTER_T *pAdapter) 2212 { 2213 int i; 2214 2215 hpt_printk(("flush all devices\n")); 2216 2217 /* flush all devices */ 2218 for (i=0; i<MAX_VDEVICE_PER_VBUS; i++) { 2219 PVDevice pVDev = pAdapter->VBus.pVDevice[i]; 2220 if(pVDev) fFlushVDev(pVDev); 2221 } 2222 } 2223 2224 static int 2225 hpt_shutdown(device_t dev) 2226 { 2227 IAL_ADAPTER_T *pAdapter; 2228 2229 pAdapter = device_get_softc(dev); 2230 if (pAdapter == NULL) 2231 return (EINVAL); 2232 2233 EVENTHANDLER_DEREGISTER(shutdown_final, pAdapter->eh); 2234 FlushAdapter(pAdapter); 2235 /* give the flush some time to happen, 2236 *otherwise "shutdown -p now" will make file system corrupted */ 2237 DELAY(1000 * 1000 * 5); 2238 return 0; 2239 } 2240 2241 void 2242 Check_Idle_Call(IAL_ADAPTER_T *pAdapter) 2243 { 2244 _VBUS_INST(&pAdapter->VBus) 2245 2246 if (mWaitingForIdle(_VBUS_P0)) { 2247 CheckIdleCall(_VBUS_P0); 2248 #ifdef SUPPORT_ARRAY 2249 { 2250 int i; 2251 PVDevice pArray; 2252 for(i = 0; i < MAX_ARRAY_PER_VBUS; i++){ 2253 if ((pArray=ArrayTables(i))->u.array.dArStamp==0) 2254 continue; 2255 else if (pArray->u.array.rf_auto_rebuild) { 2256 KdPrint(("auto rebuild.\n")); 2257 pArray->u.array.rf_auto_rebuild = 0; 2258 hpt_queue_dpc((HPT_DPC)hpt_rebuild_data_block, pAdapter, pArray, DUPLICATE); 2259 } 2260 } 2261 } 2262 #endif 2263 } 2264 /* launch the awaiting commands blocked by mWaitingForIdle */ 2265 while(pAdapter->pending_Q!= NULL) 2266 { 2267 _VBUS_INST(&pAdapter->VBus) 2268 union ccb *ccb = (union ccb *)pAdapter->pending_Q->ccb_h.ccb_ccb_ptr; 2269 hpt_free_ccb(&pAdapter->pending_Q, ccb); 2270 CallAfterReturn(_VBUS_P (DPC_PROC)OsSendCommand, ccb); 2271 } 2272 } 2273 2274 static void 2275 ccb_done(union ccb *ccb) 2276 { 2277 PBUS_DMAMAP pmap = (PBUS_DMAMAP)ccb->ccb_adapter; 2278 IAL_ADAPTER_T * pAdapter = pmap->pAdapter; 2279 KdPrintI(("ccb_done: ccb %p status %x\n", ccb, ccb->ccb_h.status)); 2280 2281 dmamap_put(pmap); 2282 xpt_done(ccb); 2283 2284 pAdapter->outstandingCommands--; 2285 2286 if (pAdapter->outstandingCommands == 0) 2287 { 2288 if(DPC_Request_Nums == 0) 2289 Check_Idle_Call(pAdapter); 2290 } 2291 } 2292 2293 /**************************************************************** 2294 * Name: hpt_action 2295 * Description: Process a queued command from the CAM layer. 2296 * Parameters: sim - Pointer to SIM object 2297 * ccb - Pointer to SCSI command structure. 2298 ****************************************************************/ 2299 2300 void 2301 hpt_action(struct cam_sim *sim, union ccb *ccb) 2302 { 2303 intrmask_t oldspl; 2304 IAL_ADAPTER_T * pAdapter = (IAL_ADAPTER_T *) cam_sim_softc(sim); 2305 PBUS_DMAMAP pmap; 2306 _VBUS_INST(&pAdapter->VBus) 2307 2308 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("hpt_action\n")); 2309 KdPrint(("hpt_action(%lx,%lx{%x})\n", (u_long)sim, (u_long)ccb, ccb->ccb_h.func_code)); 2310 2311 switch (ccb->ccb_h.func_code) 2312 { 2313 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 2314 { 2315 /* ccb->ccb_h.path_id is not our bus id - don't check it */ 2316 2317 if (ccb->ccb_h.target_lun) { 2318 ccb->ccb_h.status = CAM_LUN_INVALID; 2319 xpt_done(ccb); 2320 return; 2321 } 2322 if (ccb->ccb_h.target_id >= MAX_VDEVICE_PER_VBUS || 2323 pAdapter->VBus.pVDevice[ccb->ccb_h.target_id]==0) { 2324 ccb->ccb_h.status = CAM_TID_INVALID; 2325 xpt_done(ccb); 2326 return; 2327 } 2328 2329 oldspl = lock_driver(); 2330 if (pAdapter->outstandingCommands==0 && DPC_Request_Nums==0) 2331 Check_Idle_Call(pAdapter); 2332 2333 pmap = dmamap_get(pAdapter); 2334 HPT_ASSERT(pmap); 2335 ccb->ccb_adapter = pmap; 2336 memset((void *)pmap->psg, 0, sizeof(pmap->psg)); 2337 2338 if (mWaitingForIdle(_VBUS_P0)) 2339 hpt_queue_ccb(&pAdapter->pending_Q, ccb); 2340 else 2341 OsSendCommand(_VBUS_P ccb); 2342 unlock_driver(oldspl); 2343 2344 /* KdPrint(("leave scsiio\n")); */ 2345 break; 2346 } 2347 2348 case XPT_RESET_BUS: 2349 KdPrint(("reset bus\n")); 2350 oldspl = lock_driver(); 2351 fResetVBus(_VBUS_P0); 2352 unlock_driver(oldspl); 2353 xpt_done(ccb); 2354 break; 2355 2356 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 2357 case XPT_EN_LUN: /* Enable LUN as a target */ 2358 case XPT_TARGET_IO: /* Execute target I/O request */ 2359 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 2360 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 2361 case XPT_ABORT: /* Abort the specified CCB */ 2362 case XPT_TERM_IO: /* Terminate the I/O process */ 2363 /* XXX Implement */ 2364 ccb->ccb_h.status = CAM_REQ_INVALID; 2365 xpt_done(ccb); 2366 break; 2367 2368 case XPT_GET_TRAN_SETTINGS: 2369 case XPT_SET_TRAN_SETTINGS: 2370 /* XXX Implement */ 2371 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2372 xpt_done(ccb); 2373 break; 2374 2375 case XPT_CALC_GEOMETRY: 2376 #if __FreeBSD_version >= 500000 2377 cam_calc_geometry(&ccb->ccg, 1); 2378 #else 2379 { 2380 struct ccb_calc_geometry *ccg; 2381 u_int32_t size_mb; 2382 u_int32_t secs_per_cylinder; 2383 2384 ccg = &ccb->ccg; 2385 size_mb = ccg->volume_size / ((1024L * 1024L) / ccg->block_size); 2386 2387 if (size_mb > 1024 ) { 2388 ccg->heads = 255; 2389 ccg->secs_per_track = 63; 2390 } else { 2391 ccg->heads = 64; 2392 ccg->secs_per_track = 32; 2393 } 2394 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 2395 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 2396 ccb->ccb_h.status = CAM_REQ_CMP; 2397 } 2398 #endif 2399 xpt_done(ccb); 2400 break; 2401 2402 case XPT_PATH_INQ: /* Path routing inquiry */ 2403 { 2404 struct ccb_pathinq *cpi = &ccb->cpi; 2405 2406 cpi->version_num = 1; /* XXX??? */ 2407 cpi->hba_inquiry = PI_SDTR_ABLE; 2408 cpi->target_sprt = 0; 2409 /* Not necessary to reset bus */ 2410 cpi->hba_misc = PIM_NOBUSRESET; 2411 cpi->hba_eng_cnt = 0; 2412 2413 cpi->max_target = MAX_VDEVICE_PER_VBUS; 2414 cpi->max_lun = 0; 2415 cpi->initiator_id = MAX_VDEVICE_PER_VBUS; 2416 2417 cpi->bus_id = cam_sim_bus(sim); 2418 cpi->base_transfer_speed = 3300; 2419 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2420 strncpy(cpi->hba_vid, "HPT ", HBA_IDLEN); 2421 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2422 cpi->unit_number = cam_sim_unit(sim); 2423 cpi->transport = XPORT_SPI; 2424 cpi->transport_version = 2; 2425 cpi->protocol = PROTO_SCSI; 2426 cpi->protocol_version = SCSI_REV_2; 2427 cpi->ccb_h.status = CAM_REQ_CMP; 2428 xpt_done(ccb); 2429 break; 2430 } 2431 2432 default: 2433 KdPrint(("invalid cmd\n")); 2434 ccb->ccb_h.status = CAM_REQ_INVALID; 2435 xpt_done(ccb); 2436 break; 2437 } 2438 /* KdPrint(("leave hpt_action..............\n")); */ 2439 } 2440 2441 /* shall be called at lock_driver() */ 2442 static void 2443 hpt_queue_ccb(union ccb **ccb_Q, union ccb *ccb) 2444 { 2445 if(*ccb_Q == NULL) 2446 ccb->ccb_h.ccb_ccb_ptr = ccb; 2447 else { 2448 ccb->ccb_h.ccb_ccb_ptr = (*ccb_Q)->ccb_h.ccb_ccb_ptr; 2449 (*ccb_Q)->ccb_h.ccb_ccb_ptr = (char *)ccb; 2450 } 2451 2452 *ccb_Q = ccb; 2453 } 2454 2455 /* shall be called at lock_driver() */ 2456 static void 2457 hpt_free_ccb(union ccb **ccb_Q, union ccb *ccb) 2458 { 2459 union ccb *TempCCB; 2460 2461 TempCCB = *ccb_Q; 2462 2463 if(ccb->ccb_h.ccb_ccb_ptr == ccb) /*it means SCpnt is the last one in CURRCMDs*/ 2464 *ccb_Q = NULL; 2465 else { 2466 while(TempCCB->ccb_h.ccb_ccb_ptr != (char *)ccb) 2467 TempCCB = (union ccb *)TempCCB->ccb_h.ccb_ccb_ptr; 2468 2469 TempCCB->ccb_h.ccb_ccb_ptr = ccb->ccb_h.ccb_ccb_ptr; 2470 2471 if(*ccb_Q == ccb) 2472 *ccb_Q = TempCCB; 2473 } 2474 } 2475 2476 #ifdef SUPPORT_ARRAY 2477 /*************************************************************************** 2478 * Function: hpt_worker_thread 2479 * Description: Do background rebuilding. Execute in kernel thread context. 2480 * Returns: None 2481 ***************************************************************************/ 2482 static void hpt_worker_thread(void) 2483 { 2484 intrmask_t oldspl; 2485 2486 for(;;) { 2487 while (DpcQueue_First!=DpcQueue_Last) { 2488 ST_HPT_DPC p; 2489 oldspl = lock_driver(); 2490 p = DpcQueue[DpcQueue_First]; 2491 DpcQueue_First++; 2492 DpcQueue_First %= MAX_DPC; 2493 DPC_Request_Nums++; 2494 unlock_driver(oldspl); 2495 p.dpc(p.pAdapter, p.arg, p.flags); 2496 2497 oldspl = lock_driver(); 2498 DPC_Request_Nums--; 2499 /* since we may have prevented Check_Idle_Call, do it here */ 2500 if (DPC_Request_Nums==0) { 2501 if (p.pAdapter->outstandingCommands == 0) { 2502 _VBUS_INST(&p.pAdapter->VBus); 2503 Check_Idle_Call(p.pAdapter); 2504 CheckPendingCall(_VBUS_P0); 2505 } 2506 } 2507 unlock_driver(oldspl); 2508 2509 /*Schedule out*/ 2510 #if (__FreeBSD_version < 500000) 2511 YIELD_THREAD; 2512 #else 2513 #if (__FreeBSD_version > 700033) 2514 pause("sched", 1); 2515 #else 2516 tsleep((caddr_t)hpt_worker_thread, PPAUSE, "sched", 1); 2517 #endif 2518 #endif 2519 if (SIGISMEMBER(curproc->p_siglist, SIGSTOP)) { 2520 /* abort rebuilding process. */ 2521 IAL_ADAPTER_T *pAdapter; 2522 PVDevice pArray; 2523 PVBus _vbus_p; 2524 int i; 2525 pAdapter = gIal_Adapter; 2526 2527 while(pAdapter != 0){ 2528 2529 _vbus_p = &pAdapter->VBus; 2530 2531 for (i=0;i<MAX_ARRAY_PER_VBUS;i++) 2532 { 2533 if ((pArray=ArrayTables(i))->u.array.dArStamp==0) 2534 continue; 2535 else if (pArray->u.array.rf_rebuilding || 2536 pArray->u.array.rf_verifying || 2537 pArray->u.array.rf_initializing) 2538 { 2539 pArray->u.array.rf_abort_rebuild = 1; 2540 } 2541 } 2542 pAdapter = pAdapter->next; 2543 } 2544 } 2545 } 2546 2547 /*Remove this debug option*/ 2548 /* 2549 #ifdef DEBUG 2550 if (SIGISMEMBER(curproc->p_siglist, SIGSTOP)) 2551 #if (__FreeBSD_version > 700033) 2552 pause("hptrdy", 2*hz); 2553 #else 2554 tsleep((caddr_t)hpt_worker_thread, PPAUSE, "hptrdy", 2*hz); 2555 #endif 2556 #endif 2557 */ 2558 #if (__FreeBSD_version >= 800002) 2559 kproc_suspend_check(curproc); 2560 #elif (__FreeBSD_version >= 500043) 2561 kthread_suspend_check(curproc); 2562 #else 2563 kproc_suspend_loop(curproc); 2564 #endif 2565 #if (__FreeBSD_version > 700033) 2566 pause("hptrdy", 2*hz); /* wait for something to do */ 2567 #else 2568 tsleep((caddr_t)hpt_worker_thread, PPAUSE, "hptrdy", 2*hz); /* wait for something to do */ 2569 #endif 2570 } 2571 } 2572 2573 static struct proc *hptdaemonproc; 2574 static struct kproc_desc hpt_kp = { 2575 "hpt_wt", 2576 hpt_worker_thread, 2577 &hptdaemonproc 2578 }; 2579 2580 /*Start this thread in the hpt_attach, to prevent kernel from loading it without our controller.*/ 2581 static void 2582 launch_worker_thread(void) 2583 { 2584 IAL_ADAPTER_T *pAdapTemp; 2585 2586 kproc_start(&hpt_kp); 2587 2588 for (pAdapTemp = gIal_Adapter; pAdapTemp; pAdapTemp = pAdapTemp->next) { 2589 2590 _VBUS_INST(&pAdapTemp->VBus) 2591 int i; 2592 PVDevice pVDev; 2593 2594 for(i = 0; i < MAX_ARRAY_PER_VBUS; i++) 2595 if ((pVDev=ArrayTables(i))->u.array.dArStamp==0) 2596 continue; 2597 else{ 2598 if (pVDev->u.array.rf_need_rebuild && !pVDev->u.array.rf_rebuilding) 2599 hpt_queue_dpc((HPT_DPC)hpt_rebuild_data_block, pAdapTemp, pVDev, 2600 (UCHAR)((pVDev->u.array.CriticalMembers || pVDev->VDeviceType == VD_RAID_1)? DUPLICATE : REBUILD_PARITY)); 2601 } 2602 } 2603 2604 /* 2605 * hpt_worker_thread needs to be suspended after shutdown sync, when fs sync finished. 2606 */ 2607 #if (__FreeBSD_version < 500043) 2608 EVENTHANDLER_REGISTER(shutdown_post_sync, shutdown_kproc, hptdaemonproc, SHUTDOWN_PRI_FIRST); 2609 #else 2610 EVENTHANDLER_REGISTER(shutdown_post_sync, kproc_shutdown, hptdaemonproc, SHUTDOWN_PRI_FIRST); 2611 #endif 2612 } 2613 /* 2614 *SYSINIT(hptwt, SI_SUB_KTHREAD_IDLE, SI_ORDER_FIRST, launch_worker_thread, NULL); 2615 */ 2616 2617 #endif 2618 2619 /********************************************************************************/ 2620 2621 int HPTLIBAPI fOsBuildSgl(_VBUS_ARG PCommand pCmd, FPSCAT_GATH pSg, int logical) 2622 { 2623 union ccb *ccb = (union ccb *)pCmd->pOrgCommand; 2624 bus_dma_segment_t *sgList = (bus_dma_segment_t *)ccb->csio.data_ptr; 2625 int idx; 2626 2627 if(logical) { 2628 if (ccb->ccb_h.flags & CAM_DATA_PHYS) 2629 panic("physical address unsupported"); 2630 2631 if (ccb->ccb_h.flags & CAM_SCATTER_VALID) { 2632 if (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) 2633 panic("physical address unsupported"); 2634 2635 for (idx = 0; idx < ccb->csio.sglist_cnt; idx++) { 2636 pSg[idx].dSgAddress = (ULONG_PTR)(UCHAR *)sgList[idx].ds_addr; 2637 pSg[idx].wSgSize = sgList[idx].ds_len; 2638 pSg[idx].wSgFlag = (idx==ccb->csio.sglist_cnt-1)? SG_FLAG_EOT : 0; 2639 } 2640 } 2641 else { 2642 pSg->dSgAddress = (ULONG_PTR)(UCHAR *)ccb->csio.data_ptr; 2643 pSg->wSgSize = ccb->csio.dxfer_len; 2644 pSg->wSgFlag = SG_FLAG_EOT; 2645 } 2646 return TRUE; 2647 } 2648 2649 /* since we have provided physical sg, nobody will ask us to build physical sg */ 2650 HPT_ASSERT(0); 2651 return FALSE; 2652 } 2653 2654 /*******************************************************************************/ 2655 ULONG HPTLIBAPI 2656 GetStamp(void) 2657 { 2658 /* 2659 * the system variable, ticks, can't be used since it hasn't yet been active 2660 * when our driver starts (ticks==0, it's a invalid stamp value) 2661 */ 2662 ULONG stamp; 2663 do { stamp = random(); } while (stamp==0); 2664 return stamp; 2665 } 2666 2667 2668 static void 2669 SetInquiryData(PINQUIRYDATA inquiryData, PVDevice pVDev) 2670 { 2671 int i; 2672 IDENTIFY_DATA2 *pIdentify = (IDENTIFY_DATA2*)pVDev->u.disk.mv->identifyDevice; 2673 2674 inquiryData->DeviceType = T_DIRECT; /*DIRECT_ACCESS_DEVICE*/ 2675 inquiryData->AdditionalLength = (UCHAR)(sizeof(INQUIRYDATA) - 5); 2676 #ifndef SERIAL_CMDS 2677 inquiryData->CommandQueue = 1; 2678 #endif 2679 2680 switch(pVDev->VDeviceType) { 2681 case VD_SINGLE_DISK: 2682 case VD_ATAPI: 2683 case VD_REMOVABLE: 2684 /* Set the removable bit, if applicable. */ 2685 if ((pVDev->u.disk.df_removable_drive) || (pIdentify->GeneralConfiguration & 0x80)) 2686 inquiryData->RemovableMedia = 1; 2687 2688 /* Fill in vendor identification fields. */ 2689 for (i = 0; i < 20; i += 2) { 2690 inquiryData->VendorId[i] = ((PUCHAR)pIdentify->ModelNumber)[i + 1]; 2691 inquiryData->VendorId[i+1] = ((PUCHAR)pIdentify->ModelNumber)[i]; 2692 2693 } 2694 2695 /* Initialize unused portion of product id. */ 2696 for (i = 0; i < 4; i++) inquiryData->ProductId[12+i] = ' '; 2697 2698 /* firmware revision */ 2699 for (i = 0; i < 4; i += 2) 2700 { 2701 inquiryData->ProductRevisionLevel[i] = ((PUCHAR)pIdentify->FirmwareRevision)[i+1]; 2702 inquiryData->ProductRevisionLevel[i+1] = ((PUCHAR)pIdentify->FirmwareRevision)[i]; 2703 } 2704 break; 2705 default: 2706 memcpy(&inquiryData->VendorId, "RR18xx ", 8); 2707 #ifdef SUPPORT_ARRAY 2708 switch(pVDev->VDeviceType){ 2709 case VD_RAID_0: 2710 if ((pVDev->u.array.pMember[0] && mIsArray(pVDev->u.array.pMember[0])) || 2711 (pVDev->u.array.pMember[1] && mIsArray(pVDev->u.array.pMember[1]))) 2712 memcpy(&inquiryData->ProductId, "RAID 1/0 Array ", 16); 2713 else 2714 memcpy(&inquiryData->ProductId, "RAID 0 Array ", 16); 2715 break; 2716 case VD_RAID_1: 2717 if ((pVDev->u.array.pMember[0] && mIsArray(pVDev->u.array.pMember[0])) || 2718 (pVDev->u.array.pMember[1] && mIsArray(pVDev->u.array.pMember[1]))) 2719 memcpy(&inquiryData->ProductId, "RAID 0/1 Array ", 16); 2720 else 2721 memcpy(&inquiryData->ProductId, "RAID 1 Array ", 16); 2722 break; 2723 case VD_RAID_5: 2724 memcpy(&inquiryData->ProductId, "RAID 5 Array ", 16); 2725 break; 2726 case VD_JBOD: 2727 memcpy(&inquiryData->ProductId, "JBOD Array ", 16); 2728 break; 2729 } 2730 #endif 2731 memcpy(&inquiryData->ProductRevisionLevel, "3.00", 4); 2732 break; 2733 } 2734 } 2735 2736 static void 2737 hpt_timeout(void *arg) 2738 { 2739 _VBUS_INST(&((PBUS_DMAMAP)((union ccb *)arg)->ccb_adapter)->pAdapter->VBus) 2740 intrmask_t oldspl = lock_driver(); 2741 fResetVBus(_VBUS_P0); 2742 unlock_driver(oldspl); 2743 } 2744 2745 static void 2746 hpt_io_dmamap_callback(void *arg, bus_dma_segment_t *segs, int nsegs, int error) 2747 { 2748 PCommand pCmd = (PCommand)arg; 2749 union ccb *ccb = pCmd->pOrgCommand; 2750 struct ccb_hdr *ccb_h = &ccb->ccb_h; 2751 PBUS_DMAMAP pmap = (PBUS_DMAMAP) ccb->ccb_adapter; 2752 IAL_ADAPTER_T *pAdapter = pmap->pAdapter; 2753 PVDevice pVDev = pAdapter->VBus.pVDevice[ccb_h->target_id]; 2754 FPSCAT_GATH psg = pCmd->pSgTable; 2755 int idx; 2756 _VBUS_INST(pVDev->pVBus) 2757 2758 HPT_ASSERT(pCmd->cf_physical_sg); 2759 2760 if (error || nsegs == 0) 2761 panic("busdma error"); 2762 2763 HPT_ASSERT(nsegs<= MAX_SG_DESCRIPTORS); 2764 2765 for (idx = 0; idx < nsegs; idx++, psg++) { 2766 psg->dSgAddress = (ULONG_PTR)(UCHAR *)segs[idx].ds_addr; 2767 psg->wSgSize = segs[idx].ds_len; 2768 psg->wSgFlag = (idx == nsegs-1)? SG_FLAG_EOT: 0; 2769 /* KdPrint(("psg[%d]:add=%p,size=%x,flag=%x\n", idx, psg->dSgAddress,psg->wSgSize,psg->wSgFlag)); */ 2770 } 2771 /* psg[-1].wSgFlag = SG_FLAG_EOT; */ 2772 2773 if (pCmd->cf_data_in) { 2774 bus_dmamap_sync(pAdapter->io_dma_parent, pmap->dma_map, BUS_DMASYNC_PREREAD); 2775 } 2776 else if (pCmd->cf_data_out) { 2777 bus_dmamap_sync(pAdapter->io_dma_parent, pmap->dma_map, BUS_DMASYNC_PREWRITE); 2778 } 2779 2780 ccb->ccb_h.timeout_ch = timeout(hpt_timeout, (caddr_t)ccb, 20*hz); 2781 pVDev->pfnSendCommand(_VBUS_P pCmd); 2782 CheckPendingCall(_VBUS_P0); 2783 } 2784 2785 2786 2787 static void HPTLIBAPI 2788 OsSendCommand(_VBUS_ARG union ccb *ccb) 2789 { 2790 PBUS_DMAMAP pmap = (PBUS_DMAMAP)ccb->ccb_adapter; 2791 IAL_ADAPTER_T *pAdapter = pmap->pAdapter; 2792 struct ccb_hdr *ccb_h = &ccb->ccb_h; 2793 struct ccb_scsiio *csio = &ccb->csio; 2794 PVDevice pVDev = pAdapter->VBus.pVDevice[ccb_h->target_id]; 2795 2796 KdPrintI(("OsSendCommand: ccb %p cdb %x-%x-%x\n", 2797 ccb, 2798 *(ULONG *)&ccb->csio.cdb_io.cdb_bytes[0], 2799 *(ULONG *)&ccb->csio.cdb_io.cdb_bytes[4], 2800 *(ULONG *)&ccb->csio.cdb_io.cdb_bytes[8] 2801 )); 2802 2803 pAdapter->outstandingCommands++; 2804 2805 if (pVDev == NULL || pVDev->vf_online == 0) { 2806 ccb->ccb_h.status = CAM_REQ_INVALID; 2807 ccb_done(ccb); 2808 goto Command_Complished; 2809 } 2810 2811 switch(ccb->csio.cdb_io.cdb_bytes[0]) 2812 { 2813 case TEST_UNIT_READY: 2814 case START_STOP_UNIT: 2815 case SYNCHRONIZE_CACHE: 2816 /* FALLTHROUGH */ 2817 ccb->ccb_h.status = CAM_REQ_CMP; 2818 break; 2819 2820 case INQUIRY: 2821 ZeroMemory(ccb->csio.data_ptr, ccb->csio.dxfer_len); 2822 SetInquiryData((PINQUIRYDATA)ccb->csio.data_ptr, pVDev); 2823 ccb_h->status = CAM_REQ_CMP; 2824 break; 2825 2826 case READ_CAPACITY: 2827 { 2828 UCHAR *rbuf=csio->data_ptr; 2829 unsigned int cap; 2830 2831 if (pVDev->VDeviceCapacity > 0xfffffffful) { 2832 cap = 0xfffffffful; 2833 } else { 2834 cap = pVDev->VDeviceCapacity - 1; 2835 } 2836 2837 rbuf[0] = (UCHAR)(cap>>24); 2838 rbuf[1] = (UCHAR)(cap>>16); 2839 rbuf[2] = (UCHAR)(cap>>8); 2840 rbuf[3] = (UCHAR)cap; 2841 /* Claim 512 byte blocks (big-endian). */ 2842 rbuf[4] = 0; 2843 rbuf[5] = 0; 2844 rbuf[6] = 2; 2845 rbuf[7] = 0; 2846 2847 ccb_h->status = CAM_REQ_CMP; 2848 break; 2849 } 2850 2851 case 0x9e: /*SERVICE_ACTION_IN*/ 2852 { 2853 UCHAR *rbuf = csio->data_ptr; 2854 LBA_T cap = pVDev->VDeviceCapacity - 1; 2855 2856 rbuf[0] = (UCHAR)(cap>>56); 2857 rbuf[1] = (UCHAR)(cap>>48); 2858 rbuf[2] = (UCHAR)(cap>>40); 2859 rbuf[3] = (UCHAR)(cap>>32); 2860 rbuf[4] = (UCHAR)(cap>>24); 2861 rbuf[5] = (UCHAR)(cap>>16); 2862 rbuf[6] = (UCHAR)(cap>>8); 2863 rbuf[7] = (UCHAR)cap; 2864 rbuf[8] = 0; 2865 rbuf[9] = 0; 2866 rbuf[10] = 2; 2867 rbuf[11] = 0; 2868 2869 ccb_h->status = CAM_REQ_CMP; 2870 break; 2871 } 2872 2873 case READ_6: 2874 case WRITE_6: 2875 case READ_10: 2876 case WRITE_10: 2877 case 0x88: /* READ_16 */ 2878 case 0x8a: /* WRITE_16 */ 2879 case 0x13: 2880 case 0x2f: 2881 { 2882 UCHAR Cdb[16]; 2883 UCHAR CdbLength; 2884 _VBUS_INST(pVDev->pVBus) 2885 PCommand pCmd = AllocateCommand(_VBUS_P0); 2886 HPT_ASSERT(pCmd); 2887 2888 CdbLength = csio->cdb_len; 2889 if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) 2890 { 2891 if ((ccb->ccb_h.flags & CAM_CDB_PHYS) == 0) 2892 { 2893 bcopy(csio->cdb_io.cdb_ptr, Cdb, CdbLength); 2894 } 2895 else 2896 { 2897 KdPrintE(("ERROR!!!\n")); 2898 ccb->ccb_h.status = CAM_REQ_INVALID; 2899 break; 2900 } 2901 } 2902 else 2903 { 2904 bcopy(csio->cdb_io.cdb_bytes, Cdb, CdbLength); 2905 } 2906 2907 pCmd->pOrgCommand = ccb; 2908 pCmd->pVDevice = pVDev; 2909 pCmd->pfnCompletion = fOsCommandDone; 2910 pCmd->pfnBuildSgl = fOsBuildSgl; 2911 pCmd->pSgTable = pmap->psg; 2912 2913 switch (Cdb[0]) 2914 { 2915 case READ_6: 2916 case WRITE_6: 2917 case 0x13: 2918 pCmd->uCmd.Ide.Lba = ((ULONG)Cdb[1] << 16) | ((ULONG)Cdb[2] << 8) | (ULONG)Cdb[3]; 2919 pCmd->uCmd.Ide.nSectors = (USHORT) Cdb[4]; 2920 break; 2921 2922 case 0x88: /* READ_16 */ 2923 case 0x8a: /* WRITE_16 */ 2924 pCmd->uCmd.Ide.Lba = 2925 (HPT_U64)Cdb[2] << 56 | 2926 (HPT_U64)Cdb[3] << 48 | 2927 (HPT_U64)Cdb[4] << 40 | 2928 (HPT_U64)Cdb[5] << 32 | 2929 (HPT_U64)Cdb[6] << 24 | 2930 (HPT_U64)Cdb[7] << 16 | 2931 (HPT_U64)Cdb[8] << 8 | 2932 (HPT_U64)Cdb[9]; 2933 pCmd->uCmd.Ide.nSectors = (USHORT)Cdb[12] << 8 | (USHORT)Cdb[13]; 2934 break; 2935 2936 default: 2937 pCmd->uCmd.Ide.Lba = (ULONG)Cdb[5] | ((ULONG)Cdb[4] << 8) | ((ULONG)Cdb[3] << 16) | ((ULONG)Cdb[2] << 24); 2938 pCmd->uCmd.Ide.nSectors = (USHORT) Cdb[8] | ((USHORT)Cdb[7]<<8); 2939 break; 2940 } 2941 2942 switch (Cdb[0]) 2943 { 2944 case READ_6: 2945 case READ_10: 2946 case 0x88: /* READ_16 */ 2947 pCmd->uCmd.Ide.Command = IDE_COMMAND_READ; 2948 pCmd->cf_data_in = 1; 2949 break; 2950 2951 case WRITE_6: 2952 case WRITE_10: 2953 case 0x8a: /* WRITE_16 */ 2954 pCmd->uCmd.Ide.Command = IDE_COMMAND_WRITE; 2955 pCmd->cf_data_out = 1; 2956 break; 2957 case 0x13: 2958 case 0x2f: 2959 pCmd->uCmd.Ide.Command = IDE_COMMAND_VERIFY; 2960 break; 2961 } 2962 /*///////////////////////// */ 2963 if (ccb->ccb_h.flags & CAM_SCATTER_VALID) { 2964 int idx; 2965 bus_dma_segment_t *sgList = (bus_dma_segment_t *)ccb->csio.data_ptr; 2966 2967 if (ccb->ccb_h.flags & CAM_SG_LIST_PHYS) 2968 pCmd->cf_physical_sg = 1; 2969 2970 for (idx = 0; idx < ccb->csio.sglist_cnt; idx++) { 2971 pCmd->pSgTable[idx].dSgAddress = (ULONG_PTR)(UCHAR *)sgList[idx].ds_addr; 2972 pCmd->pSgTable[idx].wSgSize = sgList[idx].ds_len; 2973 pCmd->pSgTable[idx].wSgFlag= (idx==ccb->csio.sglist_cnt-1)?SG_FLAG_EOT: 0; 2974 } 2975 2976 ccb->ccb_h.timeout_ch = timeout(hpt_timeout, (caddr_t)ccb, 20*hz); 2977 pVDev->pfnSendCommand(_VBUS_P pCmd); 2978 } 2979 else { 2980 int error; 2981 pCmd->cf_physical_sg = 1; 2982 error = bus_dmamap_load(pAdapter->io_dma_parent, 2983 pmap->dma_map, 2984 ccb->csio.data_ptr, ccb->csio.dxfer_len, 2985 hpt_io_dmamap_callback, pCmd, 2986 BUS_DMA_WAITOK 2987 ); 2988 KdPrint(("bus_dmamap_load return %d\n", error)); 2989 if (error && error!=EINPROGRESS) { 2990 hpt_printk(("bus_dmamap_load error %d\n", error)); 2991 FreeCommand(_VBUS_P pCmd); 2992 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 2993 dmamap_put(pmap); 2994 pAdapter->outstandingCommands--; 2995 xpt_done(ccb); 2996 } 2997 } 2998 goto Command_Complished; 2999 } 3000 3001 default: 3002 ccb->ccb_h.status = CAM_REQ_INVALID; 3003 break; 3004 } 3005 ccb_done(ccb); 3006 Command_Complished: 3007 CheckPendingCall(_VBUS_P0); 3008 return; 3009 } 3010 3011 static void HPTLIBAPI 3012 fOsCommandDone(_VBUS_ARG PCommand pCmd) 3013 { 3014 union ccb *ccb = pCmd->pOrgCommand; 3015 PBUS_DMAMAP pmap = (PBUS_DMAMAP)ccb->ccb_adapter; 3016 IAL_ADAPTER_T *pAdapter = pmap->pAdapter; 3017 3018 KdPrint(("fOsCommandDone(pcmd=%p, result=%d)\n", pCmd, pCmd->Result)); 3019 3020 untimeout(hpt_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch); 3021 3022 switch(pCmd->Result) { 3023 case RETURN_SUCCESS: 3024 ccb->ccb_h.status = CAM_REQ_CMP; 3025 break; 3026 case RETURN_BAD_DEVICE: 3027 ccb->ccb_h.status = CAM_DEV_NOT_THERE; 3028 break; 3029 case RETURN_DEVICE_BUSY: 3030 ccb->ccb_h.status = CAM_BUSY; 3031 break; 3032 case RETURN_INVALID_REQUEST: 3033 ccb->ccb_h.status = CAM_REQ_INVALID; 3034 break; 3035 case RETURN_SELECTION_TIMEOUT: 3036 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 3037 break; 3038 case RETURN_RETRY: 3039 ccb->ccb_h.status = CAM_BUSY; 3040 break; 3041 default: 3042 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; 3043 break; 3044 } 3045 3046 if (pCmd->cf_data_in) { 3047 bus_dmamap_sync(pAdapter->io_dma_parent, pmap->dma_map, BUS_DMASYNC_POSTREAD); 3048 } 3049 else if (pCmd->cf_data_out) { 3050 bus_dmamap_sync(pAdapter->io_dma_parent, pmap->dma_map, BUS_DMASYNC_POSTWRITE); 3051 } 3052 3053 bus_dmamap_unload(pAdapter->io_dma_parent, pmap->dma_map); 3054 3055 FreeCommand(_VBUS_P pCmd); 3056 ccb_done(ccb); 3057 } 3058 3059 int 3060 hpt_queue_dpc(HPT_DPC dpc, IAL_ADAPTER_T * pAdapter, void *arg, UCHAR flags) 3061 { 3062 int p; 3063 3064 p = (DpcQueue_Last + 1) % MAX_DPC; 3065 if (p==DpcQueue_First) { 3066 KdPrint(("DPC Queue full!\n")); 3067 return -1; 3068 } 3069 3070 DpcQueue[DpcQueue_Last].dpc = dpc; 3071 DpcQueue[DpcQueue_Last].pAdapter = pAdapter; 3072 DpcQueue[DpcQueue_Last].arg = arg; 3073 DpcQueue[DpcQueue_Last].flags = flags; 3074 DpcQueue_Last = p; 3075 3076 return 0; 3077 } 3078 3079 #ifdef _RAID5N_ 3080 /* 3081 * Allocate memory above 16M, otherwise we may eat all low memory for ISA devices. 3082 * How about the memory for 5081 request/response array and PRD table? 3083 */ 3084 void 3085 *os_alloc_page(_VBUS_ARG0) 3086 { 3087 return (void *)contigmalloc(0x1000, M_DEVBUF, M_NOWAIT, 0x1000000, 0xffffffff, PAGE_SIZE, 0ul); 3088 } 3089 3090 void 3091 *os_alloc_dma_page(_VBUS_ARG0) 3092 { 3093 return (void *)contigmalloc(0x1000, M_DEVBUF, M_NOWAIT, 0x1000000, 0xffffffff, PAGE_SIZE, 0ul); 3094 } 3095 3096 void 3097 os_free_page(_VBUS_ARG void *p) 3098 { 3099 contigfree(p, 0x1000, M_DEVBUF); 3100 } 3101 3102 void 3103 os_free_dma_page(_VBUS_ARG void *p) 3104 { 3105 contigfree(p, 0x1000, M_DEVBUF); 3106 } 3107 3108 void 3109 DoXor1(ULONG *p0, ULONG *p1, ULONG *p2, UINT nBytes) 3110 { 3111 UINT i; 3112 for (i = 0; i < nBytes / 4; i++) *p0++ = *p1++ ^ *p2++; 3113 } 3114 3115 void 3116 DoXor2(ULONG *p0, ULONG *p2, UINT nBytes) 3117 { 3118 UINT i; 3119 for (i = 0; i < nBytes / 4; i++) *p0++ ^= *p2++; 3120 } 3121 #endif 3122