xref: /freebsd/sys/dev/hpt27xx/him.h (revision 6829dae12bb055451fa467da4589c43bd03b1e64)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2011 HighPoint Technologies, Inc.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * $FreeBSD$
29  */
30 
31 #include <dev/hpt27xx/hpt27xx_config.h>
32 
33 #ifndef _HPT_HIM_H_
34 #define _HPT_HIM_H_
35 
36 #define VERMAGIC_HIM 55
37 
38 #if defined(__cplusplus)
39 extern "C" {
40 #endif
41 
42 #include <dev/hpt27xx/list.h>
43 
44 #define SECTOR_TO_BYTE_SHIFT 9
45 #define SECTOR_TO_BYTE(x)       ((HPT_U32)(x) << SECTOR_TO_BYTE_SHIFT)
46 #define BYTE_TO_SECTOR(x)       ((x)>>SECTOR_TO_BYTE_SHIFT)
47 
48 typedef struct _PCI_ID
49 {
50 	HPT_U16 vid;
51 	HPT_U16 did;
52 	HPT_U32 subsys;
53 	HPT_U8  rev;
54 	HPT_U8  nbase;
55 	HPT_U16 reserve;
56 }
57 PCI_ID;
58 
59 typedef struct _PCI_ADDRESS
60 {
61 	HPT_U8 tree;
62 	HPT_U8 bus;
63 	HPT_U8 device;
64 	HPT_U8 function;
65 }
66 PCI_ADDRESS;
67 
68 typedef struct _HIM_ADAPTER_CONFIG
69 {
70 	PCI_ADDRESS pci_addr;
71 	PCI_ID  pci_id;
72 
73 	HPT_U8  max_devices;
74 
75 	HPT_U8  bProbeInInitializing:1;
76 
77 	HPT_U8  bSpinupOneDevEachTime:1;
78 
79 	HPT_U8  bGlobalNcq:1;
80 	HPT_U8  bSGPIOPartSupport:1;
81 
82 	HPT_U8  bNeedSASIdleTimer:1;
83 	HPT_U8  reserved:3;
84 
85 	HPT_U8  bDevsPerBus;
86 	HPT_U8  first_on_slot;
87 
88 	HPT_U8  bChipType;
89 	HPT_U8  bChipIntrNum;
90 	HPT_U8  bChipFlags;
91 	HPT_U8  bNumBuses;
92 
93 	HPT_U8  szVendorID[36];
94 	HPT_U8  szProductID[36];
95 	HPT_U32 nvramSize;
96 	HPT_U64 nvramAddress;
97 	HPT_U8  slot_index;
98 	HPT_U8  maxWidth;
99 	HPT_U8  currentWidth;
100 	HPT_U8  maxSpeed;
101 	HPT_U8  currentSpeed;
102 	HPT_U8  reserved2[7];
103 }
104 HIM_ADAPTER_CONFIG, *PHIM_ADAPTER_CONFIG;
105 
106 typedef struct _HIM_CHANNEL_CONFIG
107 {
108 	HPT_U32 io_port;
109 	HPT_U32 ctl_port;
110 } HIM_CHANNEL_CONFIG, *PHIM_CHANNEL_CONFIG;
111 
112 typedef struct _HIM_DEVICE_FLAGS
113 {
114 	HPT_UINT df_atapi               :1;
115 	HPT_UINT df_removable_drive     :1;
116 	HPT_UINT df_on_line             :1;
117 	HPT_UINT df_reduce_mode         :1;
118 	HPT_UINT df_sata                :1;
119 	HPT_UINT df_on_pm_port          :1;
120 	HPT_UINT df_support_read_ahead  :1;
121 	HPT_UINT df_read_ahead_enabled  :1;
122 	HPT_UINT df_support_write_cache :1;
123 	HPT_UINT df_write_cache_enabled :1;
124 	HPT_UINT df_cdrom_device        :1;
125 	HPT_UINT df_tape_device         :1;
126 	HPT_UINT df_changer_device      :1;
127 	HPT_UINT df_support_tcq         :1;
128 	HPT_UINT df_tcq_enabled         :1;
129 	HPT_UINT df_support_ncq         :1;
130 	HPT_UINT df_ncq_enabled         :1;
131 	HPT_UINT df_sas                 :1;
132 	HPT_UINT df_in_enclosure        :1;
133 	HPT_UINT df_ssd                 :1;
134 } DEVICE_FLAGS, *PDEVICE_FLAGS;
135 
136 #pragma pack(1)
137 typedef struct _IDENTIFY_DATA {
138 	HPT_U16 GeneralConfiguration;
139 	HPT_U16 NumberOfCylinders;
140 	HPT_U16 Reserved1;
141 	HPT_U16 NumberOfHeads;
142 	HPT_U16 UnformattedBytesPerTrack;
143 	HPT_U16 UnformattedBytesPerSector;
144 	HPT_U8  SasAddress[8];
145 	HPT_U16 SerialNumber[10];
146 	HPT_U16 BufferType;
147 	HPT_U16 BufferSectorSize;
148 	HPT_U16 NumberOfEccBytes;
149 	HPT_U16 FirmwareRevision[4];
150 	HPT_U16 ModelNumber[20];
151 	HPT_U8  MaximumBlockTransfer;
152 	HPT_U8  VendorUnique2;
153 	HPT_U16 DoubleWordIo;
154 	HPT_U16 Capabilities;
155 	HPT_U16 Reserved2;
156 	HPT_U8  VendorUnique3;
157 	HPT_U8  PioCycleTimingMode;
158 	HPT_U8  VendorUnique4;
159 	HPT_U8  DmaCycleTimingMode;
160 	HPT_U16 TranslationFieldsValid;
161 	HPT_U16 NumberOfCurrentCylinders;
162 	HPT_U16 NumberOfCurrentHeads;
163 	HPT_U16 CurrentSectorsPerTrack;
164 	HPT_U32 CurrentSectorCapacity;
165 	HPT_U16 CurrentMultiSectorSetting;
166 	HPT_U32 UserAddressableSectors;
167 	HPT_U8  SingleWordDMASupport;
168 	HPT_U8  SingleWordDMAActive;
169 	HPT_U8  MultiWordDMASupport;
170 	HPT_U8  MultiWordDMAActive;
171 	HPT_U8  AdvancedPIOModes;
172 	HPT_U8  Reserved4;
173 	HPT_U16 MinimumMWXferCycleTime;
174 	HPT_U16 RecommendedMWXferCycleTime;
175 	HPT_U16 MinimumPIOCycleTime;
176 	HPT_U16 MinimumPIOCycleTimeIORDY;
177 	HPT_U16 Reserved5[2];
178 	HPT_U16 ReleaseTimeOverlapped;
179 	HPT_U16 ReleaseTimeServiceCommand;
180 	HPT_U16 MajorRevision;
181 	HPT_U16 MinorRevision;
182 	HPT_U16 MaxQueueDepth;
183 	HPT_U16 SataCapability;
184 	HPT_U16 Reserved6[9];
185 	HPT_U16 CommandSupport;
186 	HPT_U16 CommandEnable;
187 	HPT_U16 UtralDmaMode;
188 	HPT_U16 Reserved7[11];
189 	HPT_U32 Lba48BitLow;
190 	HPT_U32 Lba48BitHigh;
191 	HPT_U16 Reserved8[23];
192 	HPT_U16 SpecialFunctionsEnabled;
193 	HPT_U16 Reserved9[128];
194 }
195 #ifdef __GNUC__
196 __attribute__((packed))
197 #endif
198 IDENTIFY_DATA, *PIDENTIFY_DATA;
199 #pragma pack()
200 
201 typedef struct _HIM_DEVICE_CONFIG
202 {
203 	HPT_U64 capacity;
204 	HPT_U32 logical_sector_size;
205 
206 	DEVICE_FLAGS flags;
207 
208 	HPT_U8  path_id;
209 	HPT_U8  target_id;
210 	HPT_U8  max_queue_depth;
211 	HPT_U8  spin_up_mode;
212 
213 	HPT_U8  reserved;
214 	HPT_U8  transfer_mode;
215 	HPT_U8  bMaxShowMode;
216 	HPT_U8  bDeUsable_Mode;
217 
218 	HPT_U16 max_sectors_per_cmd;
219 
220 	PIDENTIFY_DATA pIdentifyData;
221 
222 
223 	HPT_U8  fixed_path_id; /*equals to phy id */
224 }
225 HIM_DEVICE_CONFIG, *PHIM_DEVICE_CONFIG;
226 
227 
228 #define _DIT_MODE               0
229 #define _DIT_601                1
230 #define _DIT_READ_AHEAD         2
231 #define _DIT_WRITE_CACHE        3
232 #define _DIT_TCQ                4
233 #define _DIT_NCQ                5
234 #define _DIT_BEEP_OFF           6
235 #define _DIT_SPIN_UP_MODE       7
236 #define _DIT_IDLE_STANDBY       8
237 #define _DIT_IDENTIFY           9
238 
239 #define SPIN_UP_MODE_NOSUPPORT 0
240 #define SPIN_UP_MODE_FULL      1
241 #define SPIN_UP_MODE_STANDBY   2
242 
243 struct tcq_control {
244 	HPT_U8 enable;
245 	HPT_U8 depth;
246 };
247 
248 struct ncq_control {
249 	HPT_U8 enable;
250 	HPT_U8 depth;
251 };
252 
253 typedef struct _HIM_ALTERABLE_DEV_INFO{
254 	HPT_U8 type;
255 	union {
256 		HPT_U8 mode;
257 		HPT_U8 enable_read_ahead;
258 		HPT_U8 enable_read_cache;
259 		HPT_U8 enable_write_cache;
260 		struct tcq_control tcq;
261 		struct ncq_control ncq;
262 		void * adapter;
263 		HPT_U8 spin_up_mode;
264 		HPT_U8 idle_standby_timeout;
265 		HPT_U8 identify_indicator;
266 	}u;
267 } HIM_ALTERABLE_DEV_INFO, *PHIM_ALTERABLE_DEV_INFO;
268 
269 struct _COMMAND;
270 struct _IOCTL_ARG;
271 
272 typedef void (*PROBE_CALLBACK)(void *arg, void *dev, int index);
273 
274 typedef struct _HIM {
275 	char *name;
276 	struct _HIM *next;
277 	HPT_UINT max_sg_descriptors;
278 	#define _HIM_INTERFACE(_type, _fn, _args) _type (* _fn) _args;
279 	#include <dev/hpt27xx/himfuncs.h>
280 }
281 HIM, *PHIM;
282 
283 
284 #pragma pack(1)
285 #ifdef SG_FLAG_EOT
286 #error "don't use SG_FLAG_EOT with _SG.eot. clean the code!"
287 #endif
288 
289 typedef struct _SG {
290 	HPT_U32 size;
291 	HPT_UINT eot;
292 	union {
293 		HPT_U8 FAR * _logical;
294 		BUS_ADDRESS bus;
295 	}
296 	addr;
297 }
298 SG, *PSG;
299 #pragma pack()
300 
301 typedef struct _AtaCommand
302 {
303     HPT_U64     Lba;
304     HPT_U16     nSectors;
305     HPT_U16     pad;
306 } AtaComm, *PAtaComm;
307 
308 #define ATA_CMD_NOP          0x0
309 
310 #define ATA_CMD_SET_FEATURES    0xef
311 #define ATA_CMD_FLUSH           0xE7
312 #define ATA_CMD_VERIFY          0x40
313 #define ATA_CMD_STANDBY         0xe2
314 #define ATA_CMD_READ_MULTI      0xC4
315 #define ATA_CMD_READ_MULTI_EXT  0x29
316 #define ATA_CMD_WRITE_MULTI     0xC5
317 #define ATA_CMD_WRITE_MULTI_EXT 0x39
318 #define ATA_CMD_WRITE_MULTI_FUA_EXT     0xCE
319 
320 #define ATA_CMD_READ_DMA        0xc8  /* IDE DMA read command           */
321 #define ATA_CMD_WRITE_DMA       0xca  /* IDE DMA write command          */
322 #define ATA_CMD_READ_DMA_EXT        0x25
323 #define ATA_CMD_READ_QUEUE_EXT      0x26
324 #define ATA_CMD_READ_MAX_ADDR       0x27
325 #define ATA_CMD_READ_EXT            0x24
326 #define ATA_CMD_VERIFY_EXT          0x42
327 #define ATA_CMD_WRITE_DMA_EXT       0x35
328 #define ATA_CMD_WRITE_QUEUE_EXT     0x36
329 #define ATA_CMD_WRITE_EXT           0x34
330 
331 #define ATA_SET_FEATURES_XFER 0x3
332 #define ATA_SECTOR_SIZE 512
333 
334 typedef struct _PassthroughCmd {
335 	HPT_U16    bFeaturesReg;
336 	HPT_U16    bSectorCountReg;
337 	HPT_U16    bLbaLowReg;
338 	HPT_U16    bLbaMidReg;
339 	HPT_U16    bLbaHighReg;
340 	HPT_U8     bDriveHeadReg;
341 	HPT_U8     bCommandReg;
342 	HPT_U16    nSectors;
343 	HPT_U8    *pDataBuffer;
344 }
345 PassthroughCmd;
346 
347 typedef struct _ScsiComm {
348 	HPT_U8  cdbLength;
349 	HPT_U8  senseLength;
350 	HPT_U8  scsiStatus;
351 	HPT_U8  reserve1;
352 	HPT_U32 dataLength;
353 	HPT_U8 cdb[16];
354 	HPT_U8 *senseBuffer;
355 }
356 ScsiComm;
357 
358 typedef struct _ScsiExtComm {
359 	HPT_U8  cdbLength;
360 	HPT_U8  senseLength;
361 	HPT_U8  scsiStatus;
362 	HPT_U8  reserve1;
363 	HPT_U32 dataLength;
364 	HPT_U8  cdb[16];
365 	HPT_U8  *senseBuffer;
366 	HPT_U8  lun[8];
367 }
368 ScsiExtComm;
369 
370 
371 #define CTRL_CMD_REBUILD 1
372 #define CTRL_CMD_VERIFY  2
373 #define CTRL_CMD_INIT    3
374 
375 
376 typedef struct _R5ControlCmd {
377 	HPT_U64  StripeLine;
378 	HPT_U16 Offset;
379 	HPT_U8  Command;
380 	HPT_U8  CmdTarget;
381 }
382 R5ControlCmd, *PR5ControlCmd;
383 
384 typedef struct _HPT_ADDRESS
385 {
386 	HPT_U8 * logical;
387 	BUS_ADDRESS bus;
388 }
389 HPT_ADDRESS;
390 
391 
392 typedef struct ctl_pages {
393 	HPT_ADDRESS *pages;
394 	HPT_UINT        page_size;
395 	HPT_UINT        npages;
396 	HPT_UINT min_sg_descriptors;
397 } CONTROL_PAGES, *PCONTROL_PAGES;
398 
399 typedef struct _R1ControlCmd {
400 	HPT_U64  Lba;
401 	HPT_U16 nSectors;
402 	HPT_U8  Command;
403 	HPT_U8  CmdTarget;
404 	PCONTROL_PAGES ctl_pages;
405 }
406 R1ControlCmd, *PR1ControlCmd;
407 
408 typedef void (*TQ_PROC)(void *arg);
409 
410 struct tq_item {
411 	TQ_PROC proc;
412 	void *arg;
413 	struct tq_item *next;
414 };
415 
416 #define INIT_TQ_ITEM(t, p, a) \
417 	do { (t)->proc = p; (t)->arg = a; (t)->next = 0; } while (0)
418 
419 typedef struct _COMMAND
420 {
421 
422 	struct _VBUS * vbus;
423 
424 	struct freelist *grplist;
425 	HPT_UINT grpcnt;
426 
427 
428 	struct list_head q_link;
429 	struct tq_item done_dpc;
430 
431 	HPT_UINT extsize;
432 	void *ext;
433 
434 
435 
436 	void *target;
437 	void *priv;
438 	HPT_UPTR priv2;
439 
440 	int priority;
441 	struct lock_request *owned_lock;
442 	struct lock_request *lock_req;
443 	void (*dtor)(struct _COMMAND *, void *);
444 	void *dtor_arg;
445 
446 	union{
447 		AtaComm Ide;
448 		PassthroughCmd Passthrough;
449 		ScsiComm Scsi;
450 		ScsiExtComm ScsiExt;
451 		R5ControlCmd R5Control;
452 		R1ControlCmd R1Control;
453 	} uCmd;
454 
455 	HPT_U8 type; /* CMD_TYPE_* */
456 
457 	struct {
458 		HPT_U8  physical_sg: 1;
459 		HPT_U8  data_in: 1;
460 		HPT_U8  data_out: 1;
461 		HPT_U8  transform : 1;
462 		HPT_U8  hard_flush: 2;
463 		HPT_U8  from_cc: 1;
464 		HPT_U8  force_cc: 1;
465 	} flags;
466 
467 	/* return status */
468 	HPT_U8  Result;
469 	/* retry count */
470 	HPT_U8  RetryCount;
471 
472 
473 	PSG psg;
474 
475 
476 	int  (*buildsgl)(struct _COMMAND *cmd, PSG psg, int logical);
477 	void (*done)(struct _COMMAND *cmd);
478 }
479 COMMAND, *PCOMMAND;
480 
481 /* command types */
482 #define   CMD_TYPE_IO           0
483 #define   CMD_TYPE_CONTROL      1
484 #define   CMD_TYPE_ATAPI        2
485 #define   CMD_TYPE_SCSI         CMD_TYPE_ATAPI
486 #define   CMD_TYPE_PASSTHROUGH  3
487 #define   CMD_TYPE_FLUSH        4
488 #define   CMD_TYPE_SCSI_EXT     5
489 #define   CMD_TYPE_IO_INDIRECT  0x80
490 
491 /* flush command flags */
492 #define   CF_HARD_FLUSH_CACHE   1
493 #define   CF_HARD_FLUSH_STANDBY 2
494 
495 /* command return values */
496 #define   RETURN_PENDING             0
497 #define   RETURN_SUCCESS             1
498 #define   RETURN_BAD_DEVICE          2
499 #define   RETURN_BAD_PARAMETER       3
500 #define   RETURN_WRITE_NO_DRQ        4
501 #define   RETURN_DEVICE_BUSY         5
502 #define   RETURN_INVALID_REQUEST     6
503 #define   RETURN_SELECTION_TIMEOUT   7
504 #define   RETURN_IDE_ERROR           8
505 #define   RETURN_NEED_LOGICAL_SG     9
506 #define   RETURN_NEED_PHYSICAL_SG    10
507 #define   RETURN_RETRY               11
508 #define   RETURN_DATA_ERROR          12
509 #define   RETURN_BUS_RESET           13
510 #define   RETURN_BAD_TRANSFER_LENGTH 14
511 #define   RETURN_INSUFFICIENT_MEMORY 15
512 #define   RETURN_SECTOR_ERROR        16
513 #define   RETURN_NEED_SPINUP         17
514 
515 #if defined(__cplusplus)
516 }
517 #endif
518 #endif
519