1RocketRAID Controller Driver for FreeBSD 2Copyright (C) 2005-2015 HighPoint Technologies, Inc. All rights reserved. 3 4############################################################################# 5Revision History: 6 v1.2.7.1 06/08/2015 7 * Add 10.x comment and correct file name in readme. 8 9 v1.2.7 05/22/2015 10 * Support Report Luns command. 11 12 v1.2.6 04/13/2015 13 * Fix a bug that some disks will be dropped when data integrity test over 14 one hour on 32bit system. 15 16 v1.2.5 01/26/2015 17 * Fix a bug that failed to verify controller by retrying 8 times. 18 * Supported 4Kn drive. 19 20 v1.2.4 09/29/2014 21 * Fix a bug that memory would be corrupted and caused strange system 22 behavior when running IO and WebGUI 23 24 v1.2.3 01/24/2014 25 * fixup system crash while write date to raid5. 26 27 v1.1 07/01/2013 28 * Fix 2nd RAID controller can not load as multipath issue. 29 30 v1.0 12/13/2011 31 * First source code release 32 33############################################################################# 34 351. Overview 36--------------------- 37 This package contains FreeBSD driver source code for HighPoint RocketRAID 38 controller, include: 39 SAS Controller: RR271x, RR272x, RR274x, RR276x, RR278x. 40 41 NO WARRANTY 42 43 THE DRIVER SOURCE CODE HIGHPOINT PROVIDED IS FREE OF CHARGE, AND THERE IS 44 NO WARRANTY FOR THE PROGRAM. THERE ARE NO RESTRICTIONS ON THE USE OF THIS 45 FREE SOURCE CODE. HIGHPOINT DOES NOT PROVIDE ANY TECHNICAL SUPPORT IF THE 46 CODE HAS BEEN CHANGED FROM ORIGINAL SOURCE CODE. 47 48 LIMITATION OF LIABILITY 49 50 IN NO EVENT WILL HIGHPOINT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, 51 INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR 52 INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE 53 POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, HIGHPOINT SHALL NOT HAVE 54 LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED USED WITH THE 55 PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR RECOVERING 56 SUCH HARDWARE, OR DATA. 57 58 592. Rebuild the kernel with HighPoint RocketRAID support 60----------------------------------------------- 61 62 1) Install kernel source package and building tools. 63 64 2) Extract the driver files under the kernel source tree: 65 66 # cd /usr/src/sys/ 67 # tar xvzf /your/path/to/HPT27xx_FreeBSD_Src_v1.2.7.1_15_06_08.tgz 68 69 3) Update the kernel configuration file to include the HighPoint source. 70 Assume the configure file is GENERIC, and new kernel configure file is 71 MYKERNEL: 72 73 # cd i386/conf (or amd64/conf for AMD64) 74 # cp GENERIC MYKERNEL 75 76 4) Edit MYKERNEL, and add the following line under "RAID controllers 77 interfaced to the SCSI subsystem": 78 79 device "hpt27xx" #HighPoint RocketRAID 80 81 5) For i386 system, edit /usr/src/sys/conf/files.i386 and append the lines 82 shown below: 83 84 hpt27xx_lib.o optional hpt27xx \ 85 dependency "$S/dev/hpt27xx/i386-elf.hpt27xx_lib.o.uu" \ 86 compile-with "uudecode < $S/dev/hpt27xx/i386-elf.hpt27xx_lib.o.uu" \ 87 no-implicit-rule 88 89 dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx 90 dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx 91 dev/hpt27xx/hpt27xx_config.c optional hpt27xx 92 93 For amd64 system, edit /usr/src/sys/conf/files.amd64 and append the lines 94 shown below: 95 96 hpt27xx_lib.o optional hpt27xx \ 97 dependency "$S/dev/hpt27xx/amd64-elf.hpt27xx_lib.o.uu" \ 98 compile-with "uudecode < $S/dev/hpt27xx/amd64-elf.hpt27xx_lib.o.uu" \ 99 no-implicit-rule 100 101 dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx 102 dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx 103 dev/hpt27xx/hpt27xx_config.c optional hpt27xx 104 105 6) Rebuild and install the kernel: 106 107 a) for FreeBSD 5.x-i386/6.x-i386/7.x-i386/8.x-i386/9.x-i386/10.x-i386: 108 109 # cd /usr/src/sys/i386/conf/ 110 # /usr/sbin/config MYKERNEL 111 # cd ../compile/MYKERNEL/ 112 # make depend 113 # make 114 # make install 115 116 b) for FreeBSD 5.x-amd64/6.x-amd64/7.x-amd64/8.x-amd64/9.x-amd64/10.x-amd64: 117 118 # cd /usr/src/sys/amd64/conf/ 119 # /usr/sbin/config MYKERNEL 120 # cd ../compile/MYKERNEL/ 121 # make depend 122 # make 123 # make install 124 125 c) for FreeBSD 4.x: 126 127 # cd /usr/src/sys/i386/conf/ 128 # /usr/sbin/config MYKERNEL 129 # cd ../../compile/MYKERNEL/ 130 # make depend 131 # make 132 # make install 133 134 If the driver was previously configured as an auto-loaded module by 135 /boot/defaults/loader.conf, please remove the entry hpt27xx_load="YES" 136 from loader.conf to prevent the driver from being loaded twice. 137 138 7) Reboot from the new kernel. 139 140 1413. Build/Load the driver as a kernel module 142------------------------------------------------ 143 144 1) Install kernel source package and building tools. 145 146 2) Extract the driver files under the kernel source tree: 147 148 # cd /usr/src/sys/ 149 # tar xvzf /your/path/to/HPT27xx_FreeBSD_Src_v1.2.7.1_15_06_08.tgz 150 151 152 4) Build the driver module: 153 154 # cd modules/hpt27xx 155 # make 156 157 5) Copy the driver module to the kernel module directory 158 159 For FreeBSD 4.x: 160 161 # cp hpt27xx.ko /modules/ 162 163 For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x: 164 165 # cp hpt27xx.ko /boot/kernel/ 166 167 6) Reboot and load the driver under loader prompt. e.g: 168 169 BTX loader 1.00 BTX version is 1.01 170 Console: internal video/keyboard 171 BIOS driver A: is disk0 172 BIOS driver C: is disk2 173 BIOS 636kB/74512kB available memory 174 175 FreeBSD/i386 bootstrap loader, Revision 0.8 176 (mailto:jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT 2001) 177 Loading /boot/defaults/loader.conf 178 /kernel text=0x24f1db data=0x3007ec+0x2062c - 179 180 Hit [Enter] to boot immediagely, or any other key for command prompt. 181 Booting [kernel] in 9 seconds 182 183 <-- press SPACE key here 184 Type '?' for a list of commands, 'help' for more detailed help. 185 ok load hpt27xx 186 /modules/hpt27xx.ko text=0xf571 data=0x2c8+0x254 187 ok boot 188 189 For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x, you can select 6 on the boot menu to get a loader 190 prompt. 191 192 7) You can add a below line into /boot/defaults/loader.conf to load the 193 driver automatically: 194 195 hpt27xx_load="YES" 196 197 Please refer to the installation guide in HighPoint FreeBSD driver release 198 package for more information. 199 200 201############################################################################# 202Technical support and service 203 204 If you have questions about installing or using your HighPoint product, 205 check the user's guide or readme file first, and you will find answers to 206 most of your questions here. If you need further assistance, please 207 contact us. We offer the following support and information services: 208 209 1) The HighPoint Web Site provides information on software upgrades, 210 answers to common questions, and other topics. The Web Site is 211 available from Internet 24 hours a day, 7 days a week, at 212 http://www.highpoint-tech.com. 213 214 2) For technical support, send e-mail to support@highpoint-tech.com 215 216 NOTE: Before you send an e-mail, please visit our Web Site 217 (http://www.highpoint-tech.com) to check if there is a new or 218 updated device driver for your system. 219 220$FreeBSD$ 221