xref: /freebsd/sys/dev/gpio/gpiopps.c (revision 6ba2210ee039f2f12878c217bcf058e9c8b26b29)
1 /*-
2  * Copyright (c) 2016 Ian Lepore <ian@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1.	Redistributions of source code must retain the above copyright
9  *	notice, this list of conditions and the following disclaimer.
10  * 2.	Redistributions in binary form must reproduce the above copyright
11  *	notice, this list of conditions and the following disclaimer in the
12  *	documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/gpio.h>
32 #include <sys/kernel.h>
33 #include <sys/lock.h>
34 #include <sys/module.h>
35 #include <sys/bus.h>
36 #include <sys/conf.h>
37 #include <sys/timepps.h>
38 
39 #include <dev/gpio/gpiobusvar.h>
40 
41 #include "opt_platform.h"
42 
43 #ifdef FDT
44 #include <dev/ofw/ofw_bus.h>
45 
46 static struct ofw_compat_data compat_data[] = {
47 	{"pps-gpio", 	1},
48 	{NULL,          0}
49 };
50 SIMPLEBUS_PNP_INFO(compat_data);
51 #endif /* FDT */
52 
53 static devclass_t pps_devclass;
54 
55 struct pps_softc {
56 	device_t         dev;
57 	gpio_pin_t	 gpin;
58 	void            *ihandler;
59 	struct resource *ires;
60 	int		 irid;
61 	struct cdev     *pps_cdev;
62 	struct pps_state pps_state;
63 	struct mtx       pps_mtx;
64 	bool		 falling_edge;
65 };
66 
67 #define PPS_CDEV_NAME   "gpiopps"
68 
69 static int
70 gpiopps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
71 {
72 	struct pps_softc *sc = dev->si_drv1;
73 
74 	/* We can't be unloaded while open, so mark ourselves BUSY. */
75 	mtx_lock(&sc->pps_mtx);
76 	if (device_get_state(sc->dev) < DS_BUSY) {
77 		device_busy(sc->dev);
78 	}
79 	mtx_unlock(&sc->pps_mtx);
80 
81 	return 0;
82 }
83 
84 static	int
85 gpiopps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
86 {
87 	struct pps_softc *sc = dev->si_drv1;
88 
89 	/*
90 	 * Un-busy on last close. We rely on the vfs counting stuff to only call
91 	 * this routine on last-close, so we don't need any open-count logic.
92 	 */
93 	mtx_lock(&sc->pps_mtx);
94 	device_unbusy(sc->dev);
95 	mtx_unlock(&sc->pps_mtx);
96 
97 	return 0;
98 }
99 
100 static int
101 gpiopps_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
102 {
103 	struct pps_softc *sc = dev->si_drv1;
104 	int err;
105 
106 	/* Let the kernel do the heavy lifting for ioctl. */
107 	mtx_lock(&sc->pps_mtx);
108 	err = pps_ioctl(cmd, data, &sc->pps_state);
109 	mtx_unlock(&sc->pps_mtx);
110 
111 	return err;
112 }
113 
114 static struct cdevsw pps_cdevsw = {
115 	.d_version =    D_VERSION,
116 	.d_open =       gpiopps_open,
117 	.d_close =      gpiopps_close,
118 	.d_ioctl =      gpiopps_ioctl,
119 	.d_name =       PPS_CDEV_NAME,
120 };
121 
122 static int
123 gpiopps_ifltr(void *arg)
124 {
125 	struct pps_softc *sc = arg;
126 
127 	/*
128 	 * There is no locking here by design... The kernel cleverly captures
129 	 * the current time into an area of the pps_state structure which is
130 	 * written only by the pps_capture() routine and read only by the
131 	 * pps_event() routine.  We don't need lock-based management of access
132 	 * to the capture area because we have time-based access management:  we
133 	 * can't be reading and writing concurrently because we can't be running
134 	 * both the threaded and filter handlers concurrently (because a new
135 	 * hardware interrupt can't happen until the threaded handler for the
136 	 * current interrupt exits, after which the system does the EOI that
137 	 * enables a new hardware interrupt).
138 	 */
139 	pps_capture(&sc->pps_state);
140 	return (FILTER_SCHEDULE_THREAD);
141 }
142 
143 static void
144 gpiopps_ithrd(void *arg)
145 {
146 	struct pps_softc *sc = arg;
147 
148 	/*
149 	 * Go create a pps event from the data captured in the filter handler.
150 	 *
151 	 * Note that we DO need locking here, unlike the case with the filter
152 	 * handler.  The pps_event() routine updates the non-capture part of the
153 	 * pps_state structure, and the ioctl() code could be accessing that
154 	 * data right now in a non-interrupt context, so we need an interlock.
155 	 */
156 	mtx_lock(&sc->pps_mtx);
157 	pps_event(&sc->pps_state, PPS_CAPTUREASSERT);
158 	mtx_unlock(&sc->pps_mtx);
159 }
160 
161 static int
162 gpiopps_detach(device_t dev)
163 {
164 	struct pps_softc *sc = device_get_softc(dev);
165 
166 	if (sc->pps_cdev != NULL)
167 		destroy_dev(sc->pps_cdev);
168 	if (sc->ihandler != NULL)
169 		bus_teardown_intr(dev, sc->ires, sc->ihandler);
170 	if (sc->ires != NULL)
171 		bus_release_resource(dev, SYS_RES_IRQ, sc->irid, sc->ires);
172 	if (sc->gpin != NULL)
173 		gpiobus_release_pin(GPIO_GET_BUS(sc->gpin->dev), sc->gpin->pin);
174 	return (0);
175 }
176 
177 #ifdef FDT
178 static int
179 gpiopps_fdt_attach(device_t dev)
180 {
181 	struct pps_softc *sc;
182 	struct make_dev_args devargs;
183 	phandle_t node;
184 	uint32_t edge, pincaps;
185 	int err;
186 
187 	sc = device_get_softc(dev);
188 	sc->dev = dev;
189 
190 	mtx_init(&sc->pps_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
191 
192 	/* Initialize the pps_state struct. */
193 	sc->pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
194 	sc->pps_state.driver_abi = PPS_ABI_VERSION;
195 	sc->pps_state.driver_mtx = &sc->pps_mtx;
196 	pps_init_abi(&sc->pps_state);
197 
198 	/* Check which edge we're configured to capture (default is rising). */
199 	if (ofw_bus_has_prop(dev, "assert-falling-edge"))
200 		edge = GPIO_INTR_EDGE_FALLING;
201 	else
202 		edge = GPIO_INTR_EDGE_RISING;
203 
204 	/*
205 	 * Look up the configured gpio pin and ensure it can be configured for
206 	 * the interrupt mode we need.
207 	 */
208 	node = ofw_bus_get_node(dev);
209 	if ((err = gpio_pin_get_by_ofw_idx(dev, node, 0, &sc->gpin)) != 0) {
210 		device_printf(dev, "Cannot obtain gpio pin\n");
211 		return (err);
212 	}
213 	device_printf(dev, "PPS input on %s pin %u\n",
214 	    device_get_nameunit(sc->gpin->dev), sc->gpin->pin);
215 
216 	if ((err = gpio_pin_getcaps(sc->gpin, &pincaps)) != 0) {
217 		device_printf(dev, "Cannot query capabilities of gpio pin\n");
218 		gpiopps_detach(dev);
219 		return (err);
220 	}
221 	if ((pincaps & edge) == 0) {
222 		device_printf(dev, "Pin cannot be configured for the requested signal edge\n");
223 		gpiopps_detach(dev);
224 		return (ENOTSUP);
225 	}
226 
227 	/*
228 	 * Transform our 'gpios' property into an interrupt resource and set up
229 	 * the interrupt.
230 	 */
231 	if ((sc->ires = gpio_alloc_intr_resource(dev, &sc->irid, RF_ACTIVE,
232 	    sc->gpin, edge)) == NULL) {
233 		device_printf(dev, "Cannot allocate an IRQ for the GPIO\n");
234 		gpiopps_detach(dev);
235 		return (err);
236 	}
237 
238 	err = bus_setup_intr(dev, sc->ires, INTR_TYPE_CLK | INTR_MPSAFE,
239 	    gpiopps_ifltr, gpiopps_ithrd, sc, &sc->ihandler);
240 	if (err != 0) {
241 		device_printf(dev, "Unable to setup pps irq handler\n");
242 		gpiopps_detach(dev);
243 		return (err);
244 	}
245 
246 	/* Create the RFC 2783 pps-api cdev. */
247 	make_dev_args_init(&devargs);
248 	devargs.mda_devsw = &pps_cdevsw;
249 	devargs.mda_uid = UID_ROOT;
250 	devargs.mda_gid = GID_WHEEL;
251 	devargs.mda_mode = 0660;
252 	devargs.mda_si_drv1 = sc;
253 	err = make_dev_s(&devargs, &sc->pps_cdev, PPS_CDEV_NAME "%d",
254 	    device_get_unit(dev));
255 	if (err != 0) {
256 		device_printf(dev, "Unable to create pps cdev\n");
257 		gpiopps_detach(dev);
258 		return (err);
259 	}
260 
261 	return (0);
262 }
263 
264 static int
265 gpiopps_fdt_probe(device_t dev)
266 {
267 
268 	if (!ofw_bus_status_okay(dev))
269 		return (ENXIO);
270 
271 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
272 		device_set_desc(dev, "GPIO PPS");
273 		return (BUS_PROBE_DEFAULT);
274 	}
275 
276 	return (ENXIO);
277 }
278 
279 static device_method_t pps_fdt_methods[] = {
280 	DEVMETHOD(device_probe,		gpiopps_fdt_probe),
281 	DEVMETHOD(device_attach,	gpiopps_fdt_attach),
282 	DEVMETHOD(device_detach,	gpiopps_detach),
283 
284 	DEVMETHOD_END
285 };
286 
287 static driver_t pps_fdt_driver = {
288 	"gpiopps",
289 	pps_fdt_methods,
290 	sizeof(struct pps_softc),
291 };
292 
293 DRIVER_MODULE(gpiopps, simplebus, pps_fdt_driver, pps_devclass, 0, 0);
294 
295 #endif /* FDT */
296