xref: /freebsd/sys/dev/gpio/gpiopps.c (revision 640235e2c2ba32947f7c59d168437ffa1280f1e6)
1 /*-
2  * Copyright (c) 2016 Ian Lepore <ian@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1.	Redistributions of source code must retain the above copyright
9  *	notice, this list of conditions and the following disclaimer.
10  * 2.	Redistributions in binary form must reproduce the above copyright
11  *	notice, this list of conditions and the following disclaimer in the
12  *	documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/gpio.h>
32 #include <sys/kernel.h>
33 #include <sys/lock.h>
34 #include <sys/module.h>
35 #include <sys/bus.h>
36 #include <sys/conf.h>
37 #include <sys/timepps.h>
38 
39 #include <dev/gpio/gpiobusvar.h>
40 
41 #include "opt_platform.h"
42 
43 #ifdef FDT
44 #include <dev/ofw/ofw_bus.h>
45 
46 static struct ofw_compat_data compat_data[] = {
47 	{"pps-gpio", 	1},
48 	{NULL,          0}
49 };
50 #endif /* FDT */
51 
52 static devclass_t pps_devclass;
53 
54 struct pps_softc {
55 	device_t         dev;
56 	gpio_pin_t	 gpin;
57 	void            *ihandler;
58 	struct resource *ires;
59 	int		 irid;
60 	struct cdev     *pps_cdev;
61 	struct pps_state pps_state;
62 	struct mtx       pps_mtx;
63 	bool		 falling_edge;
64 };
65 
66 #define PPS_CDEV_NAME   "gpiopps"
67 
68 static int
69 gpiopps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
70 {
71 	struct pps_softc *sc = dev->si_drv1;
72 
73 	/* We can't be unloaded while open, so mark ourselves BUSY. */
74 	mtx_lock(&sc->pps_mtx);
75 	if (device_get_state(sc->dev) < DS_BUSY) {
76 		device_busy(sc->dev);
77 	}
78 	mtx_unlock(&sc->pps_mtx);
79 
80 	return 0;
81 }
82 
83 static	int
84 gpiopps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
85 {
86 	struct pps_softc *sc = dev->si_drv1;
87 
88 	/*
89 	 * Un-busy on last close. We rely on the vfs counting stuff to only call
90 	 * this routine on last-close, so we don't need any open-count logic.
91 	 */
92 	mtx_lock(&sc->pps_mtx);
93 	device_unbusy(sc->dev);
94 	mtx_unlock(&sc->pps_mtx);
95 
96 	return 0;
97 }
98 
99 static int
100 gpiopps_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int flags, struct thread *td)
101 {
102 	struct pps_softc *sc = dev->si_drv1;
103 	int err;
104 
105 	/* Let the kernel do the heavy lifting for ioctl. */
106 	mtx_lock(&sc->pps_mtx);
107 	err = pps_ioctl(cmd, data, &sc->pps_state);
108 	mtx_unlock(&sc->pps_mtx);
109 
110 	return err;
111 }
112 
113 static struct cdevsw pps_cdevsw = {
114 	.d_version =    D_VERSION,
115 	.d_open =       gpiopps_open,
116 	.d_close =      gpiopps_close,
117 	.d_ioctl =      gpiopps_ioctl,
118 	.d_name =       PPS_CDEV_NAME,
119 };
120 
121 static int
122 gpiopps_ifltr(void *arg)
123 {
124 	struct pps_softc *sc = arg;
125 
126 	/*
127 	 * There is no locking here by design... The kernel cleverly captures
128 	 * the current time into an area of the pps_state structure which is
129 	 * written only by the pps_capture() routine and read only by the
130 	 * pps_event() routine.  We don't need lock-based management of access
131 	 * to the capture area because we have time-based access management:  we
132 	 * can't be reading and writing concurently because we can't be running
133 	 * both the threaded and filter handlers concurrently (because a new
134 	 * hardware interrupt can't happen until the threaded handler for the
135 	 * current interrupt exits, after which the system does the EOI that
136 	 * enables a new hardware interrupt).
137 	 */
138 	pps_capture(&sc->pps_state);
139 	return (FILTER_SCHEDULE_THREAD);
140 }
141 
142 static void
143 gpiopps_ithrd(void *arg)
144 {
145 	struct pps_softc *sc = arg;
146 
147 	/*
148 	 * Go create a pps event from the data captured in the filter handler.
149 	 *
150 	 * Note that we DO need locking here, unlike the case with the filter
151 	 * handler.  The pps_event() routine updates the non-capture part of the
152 	 * pps_state structure, and the ioctl() code could be accessing that
153 	 * data right now in a non-interrupt context, so we need an interlock.
154 	 */
155 	mtx_lock(&sc->pps_mtx);
156 	pps_event(&sc->pps_state, PPS_CAPTUREASSERT);
157 	mtx_unlock(&sc->pps_mtx);
158 }
159 
160 static int
161 gpiopps_detach(device_t dev)
162 {
163 	struct pps_softc *sc = device_get_softc(dev);
164 
165 	if (sc->pps_cdev != NULL)
166 		destroy_dev(sc->pps_cdev);
167 	if (sc->ihandler != NULL)
168 		bus_teardown_intr(dev, sc->ires, sc->ihandler);
169 	if (sc->ires != NULL)
170 		bus_release_resource(dev, SYS_RES_IRQ, sc->irid, sc->ires);
171 	if (sc->gpin != NULL)
172 		gpiobus_release_pin(GPIO_GET_BUS(sc->gpin->dev), sc->gpin->pin);
173 	return (0);
174 }
175 
176 #ifdef FDT
177 static int
178 gpiopps_fdt_attach(device_t dev)
179 {
180 	struct pps_softc *sc;
181 	struct make_dev_args devargs;
182 	phandle_t node;
183 	uint32_t edge, pincaps;
184 	int err;
185 
186 	sc = device_get_softc(dev);
187 	sc->dev = dev;
188 
189 	mtx_init(&sc->pps_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
190 
191 	/* Initialize the pps_state struct. */
192 	sc->pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR;
193 	sc->pps_state.driver_abi = PPS_ABI_VERSION;
194 	sc->pps_state.driver_mtx = &sc->pps_mtx;
195 	pps_init_abi(&sc->pps_state);
196 
197 	/* Check which edge we're configured to capture (default is rising). */
198 	if (ofw_bus_has_prop(dev, "assert-falling-edge"))
199 		edge = GPIO_INTR_EDGE_FALLING;
200 	else
201 		edge = GPIO_INTR_EDGE_RISING;
202 
203 	/*
204 	 * Look up the configured gpio pin and ensure it can be configured for
205 	 * the interrupt mode we need.
206 	 */
207 	node = ofw_bus_get_node(dev);
208 	if ((err = gpio_pin_get_by_ofw_idx(dev, node, 0, &sc->gpin)) != 0) {
209 		device_printf(dev, "Cannot obtain gpio pin\n");
210 		return (err);
211 	}
212 	device_printf(dev, "PPS input on %s pin %u\n",
213 	    device_get_nameunit(sc->gpin->dev), sc->gpin->pin);
214 
215 	if ((err = gpio_pin_getcaps(sc->gpin, &pincaps)) != 0) {
216 		device_printf(dev, "Cannot query capabilities of gpio pin\n");
217 		gpiopps_detach(dev);
218 		return (err);
219 	}
220 	if ((pincaps & edge) == 0) {
221 		device_printf(dev, "Pin cannot be configured for the requested signal edge\n");
222 		gpiopps_detach(dev);
223 		return (ENOTSUP);
224 	}
225 
226 	/*
227 	 * Transform our 'gpios' property into an interrupt resource and set up
228 	 * the interrupt.
229 	 */
230 	if ((sc->ires = gpio_alloc_intr_resource(dev, &sc->irid, RF_ACTIVE,
231 	    sc->gpin, edge)) == NULL) {
232 		device_printf(dev, "Cannot allocate an IRQ for the GPIO\n");
233 		gpiopps_detach(dev);
234 		return (err);
235 	}
236 
237 	err = bus_setup_intr(dev, sc->ires, INTR_TYPE_CLK | INTR_MPSAFE,
238 	    gpiopps_ifltr, gpiopps_ithrd, sc, &sc->ihandler);
239 	if (err != 0) {
240 		device_printf(dev, "Unable to setup pps irq handler\n");
241 		gpiopps_detach(dev);
242 		return (err);
243 	}
244 
245 	/* Create the RFC 2783 pps-api cdev. */
246 	make_dev_args_init(&devargs);
247 	devargs.mda_devsw = &pps_cdevsw;
248 	devargs.mda_uid = UID_ROOT;
249 	devargs.mda_gid = GID_WHEEL;
250 	devargs.mda_mode = 0660;
251 	devargs.mda_si_drv1 = sc;
252 	err = make_dev_s(&devargs, &sc->pps_cdev, PPS_CDEV_NAME "%d",
253 	    device_get_unit(dev));
254 	if (err != 0) {
255 		device_printf(dev, "Unable to create pps cdev\n");
256 		gpiopps_detach(dev);
257 		return (err);
258 	}
259 
260 	return (0);
261 }
262 
263 static int
264 gpiopps_fdt_probe(device_t dev)
265 {
266 
267 	if (!ofw_bus_status_okay(dev))
268 		return (ENXIO);
269 
270 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data != 0) {
271 		device_set_desc(dev, "GPIO PPS");
272 		return (BUS_PROBE_DEFAULT);
273 	}
274 
275 	return (ENXIO);
276 }
277 
278 static device_method_t pps_fdt_methods[] = {
279 	DEVMETHOD(device_probe,		gpiopps_fdt_probe),
280 	DEVMETHOD(device_attach,	gpiopps_fdt_attach),
281 	DEVMETHOD(device_detach,	gpiopps_detach),
282 
283 	DEVMETHOD_END
284 };
285 
286 static driver_t pps_fdt_driver = {
287 	"gpiopps",
288 	pps_fdt_methods,
289 	sizeof(struct pps_softc),
290 };
291 
292 DRIVER_MODULE(gpiopps, simplebus, pps_fdt_driver, pps_devclass, 0, 0);
293 
294 #endif /* FDT */
295