xref: /freebsd/sys/dev/fxp/if_fxpvar.h (revision 39beb93c3f8bdbf72a61fda42300b5ebed7390c8)
1 /*-
2  * Copyright (c) 1995, David Greenman
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice unmodified, this list of conditions, and the following
10  *    disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  * $FreeBSD$
28  */
29 
30 /*
31  * Misc. defintions for the Intel EtherExpress Pro/100B PCI Fast
32  * Ethernet driver
33  */
34 
35 /*
36  * Number of transmit control blocks. This determines the number
37  * of transmit buffers that can be chained in the CB list.
38  * This must be a power of two.
39  */
40 #define FXP_NTXCB       128
41 #define	FXP_NTXCB_HIWAT	((FXP_NTXCB * 7) / 10)
42 
43 /*
44  * Maximum size of a DMA segment.
45  */
46 #define	FXP_TSO_SEGSIZE	4096
47 
48 /*
49  * Size of the TxCB list.
50  */
51 #define FXP_TXCB_SZ	(FXP_NTXCB * sizeof(struct fxp_cb_tx))
52 
53 /*
54  * Macro to obtain the DMA address of a virtual address in the
55  * TxCB list based on the base DMA address of the TxCB list.
56  */
57 #define FXP_TXCB_DMA_ADDR(sc, addr)					\
58 	(sc->fxp_desc.cbl_addr + (uintptr_t)addr -			\
59 	(uintptr_t)sc->fxp_desc.cbl_list)
60 
61 /*
62  * Number of completed TX commands at which point an interrupt
63  * will be generated to garbage collect the attached buffers.
64  * Must be at least one less than FXP_NTXCB, and should be
65  * enough less so that the transmitter doesn't becomes idle
66  * during the buffer rundown (which would reduce performance).
67  */
68 #define FXP_CXINT_THRESH 120
69 
70 /*
71  * TxCB list index mask. This is used to do list wrap-around.
72  */
73 #define FXP_TXCB_MASK   (FXP_NTXCB - 1)
74 
75 /*
76  * Number of receive frame area buffers. These are large so chose
77  * wisely.
78  */
79 #ifdef DEVICE_POLLING
80 #define FXP_NRFABUFS	192
81 #else
82 #define FXP_NRFABUFS    64
83 #endif
84 
85 /*
86  * Maximum number of seconds that the receiver can be idle before we
87  * assume it's dead and attempt to reset it by reprogramming the
88  * multicast filter. This is part of a work-around for a bug in the
89  * NIC. See fxp_stats_update().
90  */
91 #define FXP_MAX_RX_IDLE 15
92 
93 /*
94  * Default maximum time, in microseconds, that an interrupt may be delayed
95  * in an attempt to coalesce interrupts.  This is only effective if the Intel
96  * microcode is loaded, and may be changed via either loader tunables or
97  * sysctl.  See also the CPUSAVER_DWORD entry in rcvbundl.h.
98  */
99 #define TUNABLE_INT_DELAY 1000
100 
101 /*
102  * Default number of packets that will be bundled, before an interrupt is
103  * generated.  This is only effective if the Intel microcode is loaded, and
104  * may be changed via either loader tunables or sysctl.  This may not be
105  * present in all microcode revisions, see also the CPUSAVER_BUNDLE_MAX_DWORD
106  * entry in rcvbundl.h.
107  */
108 #define TUNABLE_BUNDLE_MAX 6
109 
110 #define	FXP_LOCK(_sc)		mtx_lock(&(_sc)->sc_mtx)
111 #define	FXP_UNLOCK(_sc)		mtx_unlock(&(_sc)->sc_mtx)
112 #define	FXP_LOCK_ASSERT(_sc, _what)	mtx_assert(&(_sc)->sc_mtx, (_what))
113 
114 /*
115  * Structures to handle TX and RX descriptors.
116  */
117 struct fxp_rx {
118 	struct fxp_rx *rx_next;
119 	struct mbuf *rx_mbuf;
120 	bus_dmamap_t rx_map;
121 	uint32_t rx_addr;
122 };
123 
124 struct fxp_tx {
125 	struct fxp_tx *tx_next;
126 	struct fxp_cb_tx *tx_cb;
127 	struct mbuf *tx_mbuf;
128 	bus_dmamap_t tx_map;
129 };
130 
131 struct fxp_desc_list {
132 	struct fxp_rx rx_list[FXP_NRFABUFS];
133 	struct fxp_tx tx_list[FXP_NTXCB];
134 	struct fxp_tx mcs_tx;
135 	struct fxp_rx *rx_head;
136 	struct fxp_rx *rx_tail;
137 	struct fxp_tx *tx_first;
138 	struct fxp_tx *tx_last;
139 	struct fxp_rfa *rfa_list;
140 	struct fxp_cb_tx *cbl_list;
141 	uint32_t cbl_addr;
142 	bus_dma_tag_t rx_tag;
143 };
144 
145 /*
146  * NOTE: Elements are ordered for optimal cacheline behavior, and NOT
147  *	 for functional grouping.
148  */
149 struct fxp_softc {
150 	struct ifnet *ifp;		/* per-interface network data */
151 	struct resource	*fxp_res[2];	/* I/O and IRQ resources */
152 	struct resource_spec *fxp_spec;	/* the resource spec we used */
153 	void *ih;			/* interrupt handler cookie */
154 	struct mtx sc_mtx;
155 	bus_dma_tag_t fxp_mtag;		/* bus DMA tag for mbufs */
156 	bus_dma_tag_t fxp_stag;		/* bus DMA tag for stats */
157 	bus_dmamap_t fxp_smap;		/* bus DMA map for stats */
158 	bus_dma_tag_t cbl_tag;		/* DMA tag for the TxCB list */
159 	bus_dmamap_t cbl_map;		/* DMA map for the TxCB list */
160 	bus_dma_tag_t mcs_tag;		/* DMA tag for the multicast setup */
161 	bus_dmamap_t mcs_map;		/* DMA map for the multicast setup */
162 	bus_dmamap_t spare_map;		/* spare DMA map */
163 	struct fxp_desc_list fxp_desc;	/* descriptors management struct */
164 	int maxtxseg;			/* maximum # of TX segments */
165 	int maxsegsize;			/* maximum size of a TX segment */
166 	int tx_queued;			/* # of active TxCB's */
167 	int need_mcsetup;		/* multicast filter needs programming */
168 	struct fxp_stats *fxp_stats;	/* Pointer to interface stats */
169 	uint32_t stats_addr;		/* DMA address of the stats structure */
170 	int rx_idle_secs;		/* # of seconds RX has been idle */
171 	struct callout stat_ch;		/* stat callout */
172 	int watchdog_timer;		/* seconds until chip reset */
173 	struct fxp_cb_mcs *mcsp;	/* Pointer to mcast setup descriptor */
174 	uint32_t mcs_addr;		/* DMA address of the multicast cmd */
175 	struct ifmedia sc_media;	/* media information */
176 	device_t miibus;
177 	device_t dev;
178 	int tunable_int_delay;		/* interrupt delay value for ucode */
179 	int tunable_bundle_max;		/* max # frames per interrupt (ucode) */
180 	int tunable_noflow;		/* flow control disabled */
181 	int rnr;			/* RNR events */
182 	int eeprom_size;		/* size of serial EEPROM */
183 	int suspended;			/* 0 = normal  1 = suspended or dead */
184 	int cu_resume_bug;
185 	int revision;
186 	int flags;
187 	uint8_t rfa_size;
188 	uint32_t tx_cmd;
189 };
190 
191 #define FXP_FLAG_MWI_ENABLE	0x0001	/* MWI enable */
192 #define FXP_FLAG_READ_ALIGN	0x0002	/* align read access with cacheline */
193 #define FXP_FLAG_WRITE_ALIGN	0x0004	/* end write on cacheline */
194 #define FXP_FLAG_EXT_TXCB	0x0008	/* enable use of extended TXCB */
195 #define FXP_FLAG_SERIAL_MEDIA	0x0010	/* 10Mbps serial interface */
196 #define FXP_FLAG_LONG_PKT_EN	0x0020	/* enable long packet reception */
197 #define FXP_FLAG_ALL_MCAST	0x0040	/* accept all multicast frames */
198 #define FXP_FLAG_CU_RESUME_BUG	0x0080	/* requires workaround for CU_RESUME */
199 #define FXP_FLAG_UCODE		0x0100	/* ucode is loaded */
200 #define FXP_FLAG_DEFERRED_RNR	0x0200	/* DEVICE_POLLING deferred RNR */
201 #define FXP_FLAG_EXT_RFA	0x0400	/* extended RFDs for csum offload */
202 #define FXP_FLAG_SAVE_BAD	0x0800	/* save bad pkts: bad size, CRC, etc */
203 #define FXP_FLAG_82559_RXCSUM	0x1000	/* 82559 compatible RX checksum */
204 #define FXP_FLAG_WOLCAP		0x2000	/* WOL capability */
205 #define FXP_FLAG_WOL		0x4000	/* WOL active */
206 
207 /* Macros to ease CSR access. */
208 #define	CSR_READ_1(sc, reg)		bus_read_1(sc->fxp_res[0], reg)
209 #define	CSR_READ_2(sc, reg)		bus_read_2(sc->fxp_res[0], reg)
210 #define	CSR_READ_4(sc, reg)		bus_read_4(sc->fxp_res[0], reg)
211 #define	CSR_WRITE_1(sc, reg, val)	bus_write_1(sc->fxp_res[0], reg, val)
212 #define	CSR_WRITE_2(sc, reg, val)	bus_write_2(sc->fxp_res[0], reg, val)
213 #define	CSR_WRITE_4(sc, reg, val)	bus_write_4(sc->fxp_res[0], reg, val)
214